Scribd
Upload
63 views2 pages

Series 150 Overshot Accessories

The document describes various accessories for the Series 150 Releasing and Circulating Overshots. It lists accessories such as an overshot milling shoe, nitral grapples, a mill insert, spacer rings, extension subs, an oversized guide, wall hook guides, lock rings, and a hollow mill container that can be used with the overshots to help engage fish of different shapes and sizes and prepare them for recovery.

Uploaded by

rahul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
63 views2 pages

Series 150 Overshot Accessories

The document describes various accessories for the Series 150 Releasing and Circulating Overshots. It lists accessories such as an overshot milling shoe, nitral grapples, a mill insert, spacer rings, extension subs, an oversized guide, wall hook guides, lock rings, and a hollow mill container that can be used with the overshots to help engage fish of different shapes and sizes and prepare them for recovery.

Uploaded by

rahul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DOC TITLE: Accessories - Series 150 Overshots DOC.

No: TAS-FRE-OV-AS-001

REV: NA Page |1

Accessories - Series 150 Releasing and Circulating Overshots

Overshot Mill Extension - is used with the standard guide. It is


assembled between the bowl and guide and, like the overshot milling
shoe, allows the top of the fish to be milled clean.

Nitral Grapples - are made from a special alloy that provide a much
greater hardness and a superior gripping capability.

Mill Insert - dressed with Tungsten Carbide to the desired milling


diameter, is placed inside the lowermost section of the Hollow Mill
Container and is secured in place by the Standard Guide. This will
allow for the fish to be dressed prior to entering the Overshot for
recovery.

Spacer Rings - When selecting a spiral grapple and type A packer,


the spacer ring must be used with the lock ring assembly to keep the
type A packer in the correct position.

Extension Subs - When the upper portion of the fish is damaged or


otherwise cannot be engaged, an extension sub can be used to allow
the overshot to be lowered further over the fish to assure proper
engagement and pack-off. The extension sub is assembled between
the top sub and the bowl, and is available in lengths from 24 to 60
inches.

Oversized Guide - When the hole size is considerably larger than the
diameter of the fish, there may be sufficient room for the overshot to
pass alongside of the fish without engaging it. In this case, an
oversized guide can be used to assure fish engagement and to
properly guide the fish into the overshot.

The use of the information is based on the readers discretion. No warranty is implied or expressed by Tasman Oil Tools
with the use of information contained herein. The information contained in this Data Sheet is subject to revision without
notice.
DOC TITLE: Accessories - Series 150 Overshots DOC. No: TAS-FRE-OV-AS-001

REV: NA Page |2

Wall Hook Guides - If the fish is positioned in a washed out section


of the hole, it may be impossible to engage the top of the fish using a
conventional overshot guide. A wall hook guide can be used to
capture the neck of the fish, centralize it, and then properly guide the
fish into the bowl.

Overshot Milling Shoe - Used in place of the standard guide, the


overshot milling shoe allows the top of the fish to be milled clean. This
removes excessive burring or jagged edges and assures proper
grapple engagement and pack-off.

Lock Rings - A lock ring assembly can be used to prevent


unscrewing of the top sub from the bowl during left-hand rotation of
the fishing string. Lock rings come in pairs and are assembled
between the top sub and the bowl.

Hollow Mill Container - provides a means to dress the fish and


recover the fish with a standard Overshot in one trip. The Hollow Mill
container is located between the Overshot Bowl and Standard Guide.

The use of the information is based on the readers discretion. No warranty is implied or expressed by Tasman Oil Tools
with the use of information contained herein. The information contained in this Data Sheet is subject to revision without
notice.

You might also like