THE PERFECT SOLUTION

LARGE-PART
MACHINING
YOUR NEXT
WORK
HORSE
The highly popular Haas EC-1600 Series HMCs offer large work
cubes and a maximum part capacity of 10,000 lb, making them
perfect solutions for your large-part machining requirements.
Models are available with an integrated 4th-axis rotary platter.

The EC-1600 is better than ever, with a faster The EC-1600ZT offers more Z-axis travel than The EC-1600ZT-5AX includes the integrated 4th-axis
spindle and tool changer, more rigid castings, the standard EC-1600. platter, and adds a 5th-axis rotary and A-frame
and extensive operator-convenience features. support for full 5-axis machining of large parts.
Extended Z-axis travel: 64" x 50" x 40"
50" max part swing with integrated 4th Axis Extended Z-axis travel: 64" x 50" x 40"
78" max part swing with integrated 4th Axis
(optional)
(optional) 78" max part swing
Travels: 64" x 50" x 32"
Available with a 4th-axis rotary platter integrated 5th-Axis Drive and Wiring, Built-In 4th-Axis
Available with a 4th-axis rotary platter integrated into the T-slot table to provide access to four Rotary Platter
into the T-slot table to provide access to four sides of a part or tombstone, or simultaneous
HRT310 Rotary Table and A-Frame Support
sides of a part or tombstone, or simultaneous 4th-axis machining.
4th-axis machining. Includes DWO/TCPC and Wireless Intuitive
Probing System

EC-1600 Series Standard Features:

• 7500-rpm Spindle • HaasConnect: Remote monitoring • Remote Jog Handle with Touchscreen Display
• Extra-Large Work Envelope • M130 Media Display M-Code • 1 GB Standard Program Memory
• Chip Auger • Power-Failure Detection Module • Rigid Tapping
• Enclosure Exhaust System • Ethernet and WiFi Connectivity • 1-Year Standard Warranty

EC-1600 Series Specifications:

TABLE TOOL CHANGER FEEDRATES
• Length x Width 64" x 36" • Type 30+1 SMTC • Max Cutting 500 ipm
SPINDLE • Max Tool Diameter (full) 4.0" • Rapids on X / Y / Z 600 ipm
• Max Rating 30 hp • Max Tool Dia (adjacent empty) 10.0" GENERAL
• Max Speed 7500 rpm • Max Tool Length (from gage line) 20 in • Coolant Capacity 95 gal
• Max Torque 340 ft-lb @ 700 rpm • Max Tool Weight 30 lb AIR REQUIREMENTS
• Drive System 2-Speed Gearbox • Tool-to-Tool (avg) 4.2 s • Air Required 9 scfm @ 100 psi
• Taper CT or BT 50 • Chip-to-Chip (avg) 6.3 s

Haas Automation, Inc.

Large-Part Machining
SEAMLESS INTEGRATION
4TH-AXIS
ROTARY
PLATTER
This full 4th-axis platter integrated into
the table provides fully interpolated
motion for contouring and positioning of
Ø78
PART SWING
"
large parts. Platter diameter is 30", with
a 10,000 lb weight capacity. This option
is not field-installable.

Integrated 4th Axis

Table 64" x 32" Max Weight on Platter 10,000 lb Backlash 30 arc-sec Min Resolution 0.001°
Platter Diameter 30.0" Max Rating 5.0 hp Gear Ratio 500:1 Indexing Accuracy ± 30 arc-sec
Max Part Swing 50" (Std) | 78" (ZT) Rotational Torque 2000 ft-lbf Brake Torque 4000 ft-lbf Repeatability 15 arc-sec
(continuous)

SPINDLE OPTIONS CHIP & COOLANT CONTROL

Reliable, high-performance Features and options to help your
spindles – designed and machine do what it does best –
manufactured by Haas. make chips efficiently.
STANDARD • In-Tank Belt-Type Chip Conveyor*
• 7500-rpm, Gearbox • Through-Spindle Coolant*
• Automatic Coolant Refill System*
OPTIONAL
• Auxiliary Coolant Filter System*
• 7500-rpm, 60 hp, Gearbox
• 10,000-rpm, 60 hp, Gearbox

LARGE-PART 5-AXIS MACHINING . . . BRING IT ON

The EC-1600ZT-5AX is a rugged 5-axis 5th Axis (HRT310) A Axis
solution for machining large parts. Travel 360 °
Platter Diameter 12.2"
The integrated 4th-axis platter provides ±30 degrees of B-axis Number of Std T-Slots 6 ea @ 60°
motion, while the 5th axis consists of an HRT310 with an A-frame Max Speed 75 °/sec
support mounted on a removable riser block that can support parts
Max Torque 300 ft-lbf
up to 55.875" long. The HRT310 provides 360 degrees of A-axis
Brake Torque 500 ft-lbf
rotation for excellent tool clearance and large part capacity. This
unique configuration of axes can position large parts to nearly any Center Height 9.000"
angle for 3+2 machining, or provide full simultaneous 5-axis motion
for contouring and complex machining.

*Optional
Specifications subject to change without notice. Machines shown with optional equipment.
Product appearance may differ. Not responsible for typographical errors.
www.HaasCNC.com
IT’S EASIER – WITH PICTURES, VIDEOS, AND GRAPHICS.
THE HAAS CONTROL– Designed, built, and programmed by Haas. VISUAL PROGRAMMING SYSTEM
The Haas control – hardware and software – is designed and built in-house, The Haas Visual Programming System uses graphical templates and a form-like
and optimized specifically for Haas machine tools. If there is a problem – Haas interface to help you quickly create G-code programs for not only basic part
Automation takes full responsibility for the entire machine. The Haas control features, but also more complex operations, like Y-axis milling/drilling, probing, and
is easy to learn and use, and it is the same across the entire product line. Haas more. Simply define the feature in the template, and VPS then outputs working
machines are also used extensively in educational institutions around G-code at the touch of a button. VPS also includes a custom template generator, so
the world, so graduating students are already familiar you can create templates for your own part features or frequently used programs.
with the Haas control, which makes finding new
operators and programmers easier, and
simplifies training.

STANDARD CONTROL FEATURES:

• Dedicated Keypad • 1 GB Memory

• One-Button Features • Power-Failure
• Multi-Function Jog Handle Detection Module
• 15" Color LCD Screen • M130 Media Player
• Ethernet Interface • HaasConnect Mobile
• USB Port Monitoring
• Advanced Tool Management • WiFi Connectivity

M130 MEDIA DISPLAY

The Haas M130 Media Display M-Code is a powerful tool for communicating
with machine operators and programmers directly from the Haas control.
Use M130 to call up setup instructions, tool lists, part images, manufacturing
information, and more. When the program reaches an M130, the specified
media (image, video, or PDF) will be displayed in the upper right corner of the
control screen.

• Explain difficult-to-understand
secondary operations, using
pictures and videos
• Avoid miscommunications with
your shop peers
ALARM VIDEOS
• Describe step-by-step part
inspection processes When your machine alarms out, the first thing you want to know is:
Why? The Haas control not only includes fully descriptive alarm
• Share important setup
text explaining the problem, but for many common alarms, it
information with shop
also includes short videos explaining the alarm, and providing
personnel
valuable troubleshooting tips to resolve the issue.

MAKE THE CONNECTION WITH HAASCONNECT

Get your machine status notifications anywhere, on any device! The
Haas Control has the ability to send you, and others you designate, email
notifications about the operating status of your Haas machine. Set up is
fast and easy through the MyHaas Portal and HaasCNC.com.

Haas Automation, Inc. | www.HaasCNC.com | 800-331-6746 | Made in U.S.A.

Specifications subject to change without notice. Not responsible for typographical errors. Machines shown with optional equipment.
Specifications subject to change without notice. Not responsible for typographical errors. Machines shown with optional equipment.
Actual product appearance may differ. Pricing subject to change without notice.
Actual product appearance may differ. Pricing subject to change without notice.