Lenntech
www.lenntech.com Fax. +31-152-616-289
INDUSTRIAL OEM M88
100 PSI BAG HOUSINGS
OEM M88 100 PSI Liquid Bag Housings are superb quality vessels for lower pressure
applications. They effectively remove dirt, pipe scale, and other substances from process
liquids. Quality construction and design assure clean effluent and protection for all
downstream equipment.
Unfiltered liquid enters the housing above the filter bag or strainer basket; fills the interior of
the housing; and continues through the bag or strainer basket. Solids are trapped inside the
filter bag or strainer and easily removed when the housing is serviced.
FEATURES/BENEFITS
Flow rates to 220 gpm (832.7 Lpm) 100 PSI (6.9 bar) pressure rating
Dome bottom 2” female NPT connections
Carbon Steel or Stainless Steel Side and bottom outlets
construction
Differential, drain and vent ports
Each housing is factory hydro-tested
wo-part epoxy paint finish on carbon
T
Low pressure drop with #12 size bag steel housings, inside and outside; satin
Zinc-plated 3-bolt swing lid with eye nuts finish on Stainless Steel housings on
Buna-N seal-lid inside and outside
Differential, drain, and vent ports ccepts #12-size bag filters — offers
A
Zinc-plated carbon steel baskets for 25% more surface area than standard
Carbon Steel housings; 304 stainless #2-size bag filters
steel baskets for 304 Stainless Steel Adjustable support legs
housings
APPLICATIONS
Chemical
General Industrial
Oil and Gas
Water
OPTIONS
Mesh-lined strainer baskets
Alternative O-ring materials
FILTRATION & PROCESS M88 BAG HOUSINGS
SPECIFICATIONS
Pressure Rating 100 psi @ 300˚F (6.9 bar @ 148.9˚C)
Connections 2” NPT
Housing Lid Zinc-plated 3-bolt swing closure with vent port
Lid & Basket Seals Buna-N
Inlets/Outlets Side inlet/bottom outlet, Side inlet/side outlet
Pressure Ports Two differential ports measure pressure across filter bag
Construction/Finish Carbon steel w/2-part epoxy finish on inside and outside
304 or 316 Stainless steel w/satin finish on outside
11.4”
Basket Material 304 Stainless Steel with 9/64” perforations, carbon steel baskets are Zinc-plated
Bag Size #12
Base Adjustable tripod leg assembly
DIMENSIONS
#12 BAG DATA
11.4”
SURFACE
LENGTH DIAMETER
AREA
IN 30.0 IN 8.0 FT.2 5.5
MM 762 MM 203 M2 0.51 IN 7.0”
All dimensions are approximate.
ADJUSTABLE
SUPPORT LEGS
35.2”
12”
(305 mm)
IN 7.0”
35.2” 22”
(559 mm) OUT
OUT
FILTRATION & PROCESS M88 BAG HOUSINGS
ORDERING INFORMATION
To create your ordering part number, use the part number configurator below.
Custom configurations available. Please contact customer service.
Carbon steel not recommended for water use as the epoxy coating is not designed as a corrosion inhibitor.
HOUSING EXAMPLE: M88302NABC10
M88 Housing (M88), #2 basket (30), 3” (3), Flange connection (F)
Outlet located on bottom and opposite sides (AB), Carbon steel (C), 100 psi (10)
M88 30 2 N AB C 10
BASKET CONNECTION CONNECTION OUTLET
HOUSING (IN.) (IN.) TYPE LOCATION MATERIAL PSI
M88 30 = #2 2 N = NPT AB = Bottom/ C = Carbon 10 = 100
Opposite Side Steel
4 = 304 SS
FILTRATION & PROCESS M88 BAG HOUSINGS
Lenntech
[email protected] Tel. +31-152-610-900
FILTRATION & PROCESS www.lenntech.com Fax. +31-152-616-289
All Pentair trademarks and logos are owned by Pentair, Inc. or its affiliates. All other registered and unregistered trademarks and logos are the property of their
respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.
Pentair is an equal opportunity employer.
4003038 Rev D DE14 © 2014 Pentair Residential Filtration, LLC. All rights reserved.
