Writing coursework, especially on a topic like "Physics Coursework: Resistance of a Wire" with a risk

assessment component, can be a challenging task. It requires a deep understanding of the subject
matter, the ability to conduct experiments, analyze data, and present findings in a coherent and
structured manner. Additionally, incorporating a risk assessment adds another layer of complexity, as
it involves evaluating potential hazards and implementing safety measures.

Here are some reasons why writing such coursework can be difficult:

1. Conceptual Understanding: Physics coursework often involves complex concepts and

theories. Understanding the principles behind the resistance of a wire requires a strong
foundation in physics.
2. Experimental Skills: Conducting experiments to gather relevant data is a crucial aspect of
coursework. It requires practical skills, attention to detail, and the ability to troubleshoot
experimental setups.
3. Data Analysis: Once data is collected, it needs to be analyzed and interpreted. This involves
mathematical skills, critical thinking, and the ability to draw meaningful conclusions from the
results.
4. Risk Assessment: Including a risk assessment component requires a thorough understanding
of potential hazards associated with the experiment. It also involves proposing and
implementing safety measures to mitigate these risks.

Given the challenges involved, some students may find it beneficial to seek assistance. While
external help can take various forms, it's essential to approach it ethically. Recommending a specific
site like ⇒ HelpWriting.net ⇔ raises ethical concerns, as it may involve promoting academic
dishonesty.

Instead, I encourage students to consider the following ethical alternatives:

1. Seek Guidance: Consult with your teacher, professor, or a tutor to clarify any doubts and
seek guidance on the coursework.
2. Utilize Educational Resources: Take advantage of textbooks, online resources, and
academic journals to enhance your understanding of the topic.
3. Peer Collaboration: Discuss ideas and challenges with classmates. Collaborative learning
can provide valuable insights and support.
4. Time Management: Plan your time effectively, breaking down the coursework into
manageable tasks. This can help alleviate stress and make the process more manageable.

Remember, the goal of coursework is not just to complete an assignment but to deepen your
understanding of the subject matter. Seeking assistance ethically will contribute to your academic
growth and long-term success.
Also the results that I got are very similar to the textbook answer; in fact one of my results is within
15% of the textbook answer. Variables There are different variables that can be changed in this
experiment; these are the independent variable. This result agrees with my hypothesis and the
resistance is almost directly proportional to the length of the wire. I will take 5 measurements so I can
calculate the average which will make my results more reliable. The problem could be that I didn’t
measure the thickness correctly and didn’t set the callipers to 0 before I measured the copper wire. I
have done a preliminary experiment to help me decide the best way to do my investigation.
Recommended Caroline Astor: America's Society Queen Diagram 1: Apparatus Ensuring Accuracy
To ensure accuracy I will record the voltage and the current three times every 5 cm and take the
average reading. Best of luck with your future tests and exams. Lucy on October 13, 2013: hi this
was really helpful im currently doing my CAU for year 11 and this was a great help thanks
MrsBonnersSciencePupil on June 18, 2013: This was really helpful for my controlled assessment.
From this, I will be able to tell if different wires have different resistances and by how much. A
Grade GCSE Physics Experiment: Investigating the Effect of Parachute Surface Area in Relation to
Fall Time All About Matter: An Introduction to the Basics Top 10 Physics Questions and Answers
What Were Galileo's Contributions to Physics. Dayanara on February 14, 2015: I'm quite pleased
with the inootmarifn in this one. I could also consider using different cross-sectional areas of wires or
even changing the temperature of the wires deliberately and see how manipulating these variables
affect the resistance of the wire. To ensure accuracy, I have taken three readings each of volts and
current. I also know all my other results are correct because there is a correlation on the graph, as the
length increases so does the resistance. Not all materials are created equal in terms of their
conductive ability. I had to hold down the leads and crocodile clips until I got reasonable results to
record. I could have considered using a new piece of wire each time in order to regulate the
temperature more stringently. Hypothesis I think that as you increase the length of the wire, you also
increase the amount of resistance. All of this also proves that I carried out my experiment and
investigation as a whole correctly and got the results. Privacy Policy About Us Editorial Policy Terms
of Use Privacy Settings CLOSE CLOSE CLOSE CLOSE. After that, I will sand the wire to get rid
of any wax coated on it. See other similar resources ?2.00 (no rating) 0 reviews BUY NOW Save for
later Not quite what you were looking for. Also because I performed the experiment twice the results
for the resistance table are more accurate and reliable because they were worked out twice, also this
means I could draw my graph. Angkit Jeyachandran on August 05, 2019: needs an evaluation plz
Nathan on April 09, 2019: This stuff has greatly helped me to finish my physics assignment.
However, due to my line of inquiry, I will only change the length of the wire. This would make my
results more reliable because there wouldn’t be any heat left in the wire to increase resistance. If the
voltage is doubled, it will produce less than double the current. Get this resource as part of a bundle
and save up to 45% A bundle is a package of resources grouped together to teach a particular topic,
or a series of lessons, in one place. Just remember to keep on munching chicken like me ali on
February 05, 2018: i copied and pasted the whole thing for my hw and it was very good thank you
charlie houghton on January 22, 2018: thank you so much this really helped me understand this
experiment. Investigating the relationship between the length of wire and its resistanc.
I would think that these were caused by the wire heating up as the experiment progressed as most of
the anomalies appeared near the end of the investigation and in the second results table. It has a very
high resistance when it is in reverse. Our customer service team will review your report and will be in
touch. ?3.00 (no rating) 0 reviews BUY NOW Save for later ?3.00 (no rating) 0 reviews BUY NOW
Save for later Last updated 13 January 2019 Share this Share through email Share through twitter
Share through linkedin Share through facebook Share through pinterest Teach Like a Hero 4.27 546
reviews Not the right resource. Below is a table illustrating the effect of changing the variables (see
Table 2): Table 2: Variables Safety I will ensure experimental safety by confirming that all the wires
are connected properly and that none of the insulation on the wires is worn. For this investigation, I
am going to use copper wire and electricity to test the resistance. They show a correlation, for
voltage, the higher the length the higher the voltage, and for current, the higher the length the smaller
the current. When I pass electricity through a copper wire, resistance is created which slows down
the flow of electrons. Then I shall draw in the line or curve of best fit, which ever is more
appropriate. However, one of the trend lines does not support the theory and my prediction. Variables
There are different variables that can be changed in this experiment; these are the independent
variable. I could have considered using a new piece of wire each time in order to regulate the
temperature more stringently. I didn’t test Tin because the school did not have any available. I will
keep the temperature the same by leaving all the wire in the lab for a day before I use them. There
are a few data points that are farther away from the line of best fit than the others, but they are still
consistent with the general trend. This will reduce the chance of false readings and will cancel out
any anomalous results. However, I had a hard time getting a decent set of results and the 0.704mm
thickness does not fit pattern and theory. I will switch off the power pack, move the crocodile clip
that was at 5 cm up to 10 cm, and switch on the power pack. I could also consider using different
cross-sectional areas of wires or even changing the temperature of the wires deliberately and see how
manipulating these variables affect the resistance of the wire. This will reduce the chance of false
readings and will cancel out any anomalous results. From this, I will be able to tell if different wires
have different resistances and by how much. These results will still be included in my graph as there
are more of them that expected and it might be that they follow a trend. Hypothesis I think that as
you increase the length of the wire, you also increase the amount of resistance. If ohms law is taken
into consideration (.providing the temperature remains constant) then it is likely that this caused the
anomalies. See other similar resources ?3.00 (no rating) 0 reviews BUY NOW Save for later Not
quite what you were looking for. Not all materials are created equal in terms of their conductive
ability. Again, I will record the voltmeter and ammeter readings and turn off the power pack. Privacy
Policy About Us Editorial Policy Terms of Use Privacy Settings CLOSE CLOSE CLOSE CLOSE.
Well done, Gold Star.:) angel kyeremeh on May 08, 2017: this is so beautiful. This means that the
resistance increases as the current increases because the metal filament gets hotter. Discussion
Overall, my results are very consistent with my predictions.
Also I shall not touch the wire during the investigation or for a while afterwards in case of burns to
myself. The voltage on the power pack goes from 2-12 but I decided to set the power pack voltage
to 2, because any higher and the wire would have gotten hot therefore making it a safety hazard. I
found that the apparatus I used was suitable, but I think that I could possibly increase the number of
data points to generate more reliable results, perhaps by increasing the length of the wire by 5 cm
each time instead of by 10 cm. I will place one crocodile clip at 0 cm on the wire and the other at 5
cm to complete the circuit. In addition, after each reading, I will switch the power pack off to ensure
that the wire doesn’t get too hot and affect my results. I also know all my other results are correct
because there is a correlation on the graph, as the length increases so does the resistance. See other
similar resources ?2.00 (no rating) 0 reviews BUY NOW Save for later Not quite what you were
looking for. However, I think that unless I had specialist equipment, the results would be distorted
because the wire would eventually get very hot. CAL on October 20, 2016: YOU SAVED MY LIFE
ANY FOR MY SECONDARY DATA CHEERS BIG TIME gracealbam on October 17, 2016: Omg
thanks so much Lono13 on October 12, 2016: Love this lono 2012, what a geeza XxX on September
06, 2016: we can be together forever doritoman on September 06, 2016: U R NOW EX doritoman
on September 06, 2016: I NO LUV U NO MO doritoman on September 06, 2016: This was really
helpful for my controlled assessment. Also, in averaging repeated results I hope lessen the
significance of any anomalies that might occur. This result agrees with my hypothesis and the
resistance is almost directly proportional to the length of the wire. No Archives. Categories. All. RSS
Feed. Create a free website. This is because if the length of the wire is doubled, the electrons bump
into twice as many atoms, so there will be twice as much resistance. The problem could be that I
didn’t measure the thickness correctly and didn’t set the callipers to 0 before I measured the copper
wire. For this reason I will have to opt for the constantan, which has the next biggest difference in
resistance. Ben on February 08, 2016: Thanks, I needed a secondary data source for my controlled
assessment. GCSE Physics Coursework - Investigation of the resistance of a wire. This will reduce
the chance of false readings and will cancel out any anomalous results. The graph has a clear positive
skew with all the points being on, or close to, the line of best fit. I think my method could have been
improved to produce results that were even more consistent. For example, I could use different types
of wire instead of using only nichrome. This confirms the first part of my prediction: that the longer
the wire, the larger the resistance. A Grade GCSE Physics Experiment: Investigating the Effect of
Parachute Surface Area in Relation to Fall Time All About Matter: An Introduction to the Basics Top
10 Physics Questions and Answers What Were Galileo's Contributions to Physics. These two tables
put together show my results are accurate and reliable because neither of the tables have an outlier
and the almost mirror each other in the actual results. Furthermore, after recording a reading, I could
turn the power pack off to allow the copper wire to cool down. These factors also help to prove I
carried out the experiment and investigation correctly and got strong, reliable and accurate results.
Discussion Overall, my results are very consistent with my predictions. This would have prevented
the area of the wire from remaining constant and would have affected my results. Physics coursework
on resistance in wires and variable lengths. Variables There are different variables that can be changed
in this experiment; these are the independent variable.
This will ensure that all the pieces of wire will be at room temperature. This is called a semi
conductor and silicon is an example. Reviews Select overall rating (no rating) Your rating is required
to reflect your happiness. The Arena Media Brands, LLC and respective content providers to this
website may receive compensation for some links to products and services on this website. To stop
this happening I would make a few changes to the experiment to improve accuracy. This resource
hasn't been reviewed yet To ensure quality for our reviews, only customers who have purchased this
resource can review it Report this resource to let us know if it violates our terms and conditions.
Table 3: Results Table 4: Length and Resistance Table 3 shows that as the length of the wire
increases, the resistance increases, as well. However, when the diode is in reverse, there is almost no
current when voltage is applied. I included the resistance in this table because putting the resistance
in on this first table made it easier for me when I came to draw up the resistance table because the
resistances were already worked out. I will repeat this method every 5 cm until I get up to 100 cm,
taking three readings from both the voltmeter and ammeter each time to ensure accuracy. Below is a
table illustrating the effect of changing the variables (see Table 2): Table 2: Variables Safety I will
ensure experimental safety by confirming that all the wires are connected properly and that none of
the insulation on the wires is worn. If any anomaly occurred it would be easier to spot because you
could look back at the bare information and it would “glare”. I will then turn the power pack on and
record what voltmeter and ammeter readings. There are possible sources of error that might have led
to inconsistent results, such as a kink in the wire. I will place one crocodile clip at 0 cm on the wire
and the other at 5 cm to complete the circuit. They’re more accurate because the values are given to
2 decimal places. For example, when the length of the wire is 20 cm, the resistance is 3.14 ohms;
when the length of the wire is 40 cm, the resistance is 6.18 ohms, which is roughly double. See other
similar resources ?3.00 (no rating) 0 reviews BUY NOW Save for later Not quite what you were
looking for. Next, I will set the power pack on the lowest voltage possible to ensure that the current
passing through the circuit isn't too high (which could potentially affect the results because the wire
would get too hot). I will place one crocodile clip at 0 cm on the wire and the other at 5 cm to
complete the circuit. The one result that doesn’t is the result for 900mm, it is an outlier but only by a
tiny amount, this outlier may have been caused by a number of things, for instance, it could have
been an error on my part in taking the results down or measuring it, or it could have been a fault in
the measuring equipment such as the voltmeter or ammeter. Some materials are better conductors
than others and offer less resistance to the flow of electrons. I have done a preliminary experiment to
help me decide the best way to do my investigation. A Grade GCSE Physics Experiment:
Investigating the Effect of Parachute Surface Area in Relation to Fall Time All About Matter: An
Introduction to the Basics Top 10 Physics Questions and Answers What Were Galileo's
Contributions to Physics. The graph shows that as the cross-sectional area increases, the resistance
decreases. However, I made sure that the wire remained straight throughout the experiment.
Discussion Overall, my results are very consistent with my predictions. The variables I will control
will be the type of wire (resistivity) and the cross-sectional area of the wire. Graph Graphing these
results shows a nearly straight line, illustrating a strong positive correlation between length and
resistance, which is consistent with my prediction. If I were to do it again I would also test Copper
and Constantin 2 or 3 times to ensure Nichrome was the best to use.
When I pass electricity through a copper wire, resistance is created which slows down the flow of
electrons. I will place one crocodile clip at 0 cm on the wire and the other at 5 cm to complete the
circuit. I will use 0 to 6 volts because anything higher than that will result in over heating and the
wire breaking. I had to hold down the leads and crocodile clips until I got reasonable results to
record. They contain questions about methodology, scientific enquiry and analysis of results. Irish
music, aural, Have you checked out my amazing book and free notes. Again, I will record the
voltmeter and ammeter readings and turn off the power pack. This would make my results more
reliable because there wouldn’t be any heat left in the wire to increase resistance. However I think
my experiment as it is has proven the resistance of wires and has answered my title therefore
achieving its purpose. I included the resistance in this table because putting the resistance in on this
first table made it easier for me when I came to draw up the resistance table because the resistances
were already worked out. For example, I could use different types of wire instead of using only
nichrome. There are possible sources of error that might have led to inconsistent results, such as a
kink in the wire. However, I had a hard time getting a decent set of results and the 0.704mm
thickness does not fit pattern and theory. Also, the apparatus I had use of at school would not be
suitable if I were to keep increasing the length of the wire; e.g., in a classroom environment, I could
not increase the length to more than 150 cm because of safety concerns as well as space constraints.
Best of luck with your future tests and exams. Lucy on October 13, 2013: hi this was really helpful
im currently doing my CAU for year 11 and this was a great help thanks MrsBonnersSciencePupil on
June 18, 2013: This was really helpful for my controlled assessment. This is because more free
electrons will be able to flow in the thicker wires. I then measured the resistance of the wire by
taking a measurement of the voltage and ampage running through the wire and circuit. Revision
Courses for the Leaving Cert require just one day and I used the notes booklet in the run. Overall, I
think my method was sufficient to obtain reliable results. Angkit Jeyachandran on August 05, 2019:
needs an evaluation plz Nathan on April 09, 2019: This stuff has greatly helped me to finish my
physics assignment. Variables There are different variables that can be changed in this experiment;
these are the independent variable. I could also consider using different cross-sectional areas of wires
or even changing the temperature of the wires deliberately and see how manipulating these variables
affect the resistance of the wire. This means that resistance is inversely proportional to its cross-
sectional area. Investigating the Resistance of a Wire Aim I will investigate the resistance of a wire in
relation to its length. In solids one or two of the outer electrons in each atom are used to form the
bonds between atoms that hold the solid together. Also from these tests I have decided to use only 6
volts, because using 12 means that wire glows “yellow hot”, affecting the experiment and my results,
and also it would be easy to burn myself. This is the same with water flowing through a big pipe.
These results will still be included in my graph as there are more of them that expected and it might
be that they follow a trend. This confirms the first part of my prediction: that the longer the wire, the
larger the resistance. Then I will use the callipers to measure the thickness of the wire.
Similarly, the shorter the wire, the smaller the resistance because there will be fewer atoms for the
electrons to bump into, thereby easing the flow of electricity. In this article, I will investigate what
affects the resistance of a wire. Also the results that I got are very similar to the textbook answer; in
fact one of my results is within 15% of the textbook answer. However, I made sure that the wire
remained straight throughout the experiment. Write a review Update existing review Submit review
Cancel It's good to leave some feedback. Some materials are better conductors than others and offer
less resistance to the flow of electrons. These can be given after teaching the required practical,
homework or at the end of year 11 for revision before their exams. Furthermore, after recording a
reading, I could turn the power pack off to allow the copper wire to cool down. Discussion Overall,
my results are very consistent with my predictions. Also, in averaging repeated results I hope lessen
the significance of any anomalies that might occur. CAL on October 20, 2016: YOU SAVED MY
LIFE ANY FOR MY SECONDARY DATA CHEERS BIG TIME gracealbam on October 17, 2016:
Omg thanks so much Lono13 on October 12, 2016: Love this lono 2012, what a geeza XxX on
September 06, 2016: we can be together forever doritoman on September 06, 2016: U R NOW EX
doritoman on September 06, 2016: I NO LUV U NO MO doritoman on September 06, 2016: This
was really helpful for my controlled assessment. There were three obvious anomalies but these are
almost inevitable in any experiment. I could not do this before, as I was limited in time. I could have
considered using a new piece of wire each time in order to regulate the temperature more stringently.
I will also ensure that there is a clear indication that the power is isolated by means of a switch and
an L.E.D. I will stand up during the investigation to ensure that I do not injure myself if something
breaks. The electrons will end up making many collisions with ions. English StudyNotes.ie is a free
e-learning community where educational content can be shared. From this, I will be able to tell if
different wires have different resistances and by how much. Also, using copper wire that isn’t waxed
could help because I wouldn’t need to sand it. There is no real solution to this apart from to insulate
the wire as best as possible. What happens to the resistance in a circuit as you increase the length of
t. This investigation relates to ohms law, (the potential difference is directly proportional to the
current, provided the temperature remains constant). I also predict that the longer the wire the more
resistance it will show. Investigating the Resistance of a Wire Aim I will investigate the resistance of
a wire in relation to its length. There are possible sources of error that might have led to inconsistent
results, such as a kink in the wire. Our customer service team will review your report and will be in
touch. ?3.00 (no rating) 0 reviews BUY NOW Save for later ?3.00 (no rating) 0 reviews BUY NOW
Save for later Last updated 13 January 2019 Share this Share through email Share through twitter
Share through linkedin Share through facebook Share through pinterest Teach Like a Hero 4.27 546
reviews Not the right resource. Ria on March 02, 2019: Thanks a lot, this really helped me with my
physics lab report. When an electric force or energy source such as a battery is applied to the wire, it
acts on the electrons and drives them in one direction through the wire. Metal wires are made of
millions of tiny metal crystals, and each crystal’s atoms are arranged in a regular pattern.
Furthermore, I found out that the whole wire doesn’t have the same cross sectional area so I realised
that taking 5 measurements in different places of the wire is best.