FMI CALIBRATION LABORATORY, B-7/12, MIDC AREA, MIRAJ, SANGLI,

Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2374 Page No 1 of 14
Validity 26/03/2021 to 25/03/2023 Last Amended on -

Measurand or Reference
Measurement range and
Material/Type of instrument * Calibration and
Calibration or Measurement additional parameters
S.No Discipline / Group or material to be calibrated Measurement
Method or procedure where applicable(Range
or measured / Quantity Capability(CMC)(±)
and Frequency)
Measured /Instrument

Permanent Facility
Using Extensometer
calibration fixture,
MECHANICAL-
Electronic probe and 3.0 µm for IS
DIMENSION
1 Extensometer DRO, as per IS Up to 5 mm method 300 µm for
(PRECISION
12872 & ASTM E83 ASTM method
INSTRUMENTS)
by comparison
method
Calibration of Using Rockwell
MECHANICAL-
Rockwell Reference Standardising
HARDNESS 70 HR15N to 95
2 Hardness Blocks Machine as per IS 0.45HR15N
TESTING HR15N
(Test Blocks): 1586 (Part 3), ISO
MACHINES
HR15N Scale 6508-3 & ASTM E18
Calibration of Using Rockwell
MECHANICAL-
Rockwell Reference Standardising
HARDNESS 67 HR15TW to 93
3 Hardness Blocks Machine as per IS 0.67HR15TW
TESTING HR15TW
(Test Blocks): 1586 (Part 3), ISO
MACHINES
HR15TW Scale 6508-3 & ASTM E18
Calibration of Using Rockwell
MECHANICAL-
Rockwell Reference Standardising
HARDNESS 40 HR30N to 87
4 Hardness Blocks Machine as per IS 0.5HR30N
TESTING HR30N
(Test Blocks): 1586 (Part 3), ISO
MACHINES
HR30N Scale 6508-3 & ASTM E18
Calibration of Using Rockwell
MECHANICAL-
Rockwell Reference Standardising
HARDNESS 29 HT30TW to 82
5 Hardness Blocks Machine as per IS 0.7HT30TW
TESTING HR30TW
(Test Blocks): 1586 (Part 3), ISO
MACHINES
HR30TW Scale 6508-3 & ASTM E18

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 FMI CALIBRATION LABORATORY, B-7/12, MIDC AREA, MIRAJ, SANGLI,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2374 Page No 2 of 14
Validity 26/03/2021 to 25/03/2023 Last Amended on -

Measurand or Reference
Measurement range and
Material/Type of instrument * Calibration and
Calibration or Measurement additional parameters
S.No Discipline / Group or material to be calibrated Measurement
Method or procedure where applicable(Range
or measured / Quantity Capability(CMC)(±)
and Frequency)
Measured /Instrument

Calibration of Using Rockwell

MECHANICAL-
Rockwell Reference Standardising
HARDNESS 20 HR45N to 77
6 Hardness Blocks Machine as per IS 0.5HR45N
TESTING HR45N
(Test Blocks): 1586 (Part 3), ISO
MACHINES
HR45N Scale 6508-3 & ASTM E18
Calibration of Using Rockwell
MECHANICAL-
Rockwell Reference Standardising
HARDNESS 10 HR45TW to 72
7 Hardness Blocks Machine as per IS 0.8HR45TW
TESTING HR45TW
(Test Blocks): 1586 (Part 3), ISO
MACHINES
HR45TW Scale 6508-3 & ASTM E18
Calibration of Using Rockwell
MECHANICAL-
Rockwell Reference Standardising
HARDNESS
8 Hardness Blocks Machine as per IS 20 HRA to 95 HRA 0.4HRA
TESTING
(Test Blocks): HRA 1586 (Part 3), ISO
MACHINES
Scale 6508-3 & ASTM E18
Calibration of Using Rockwell
MECHANICAL-
Rockwell Reference Standardising
HARDNESS 10 HRBW to 80
9 Hardness Blocks Machine as per IS 1.04HRBW
TESTING HRBW
(Test Blocks): HRBW 1586 (Part 3), ISO
MACHINES
Scale 6508-3 & ASTM E18
Calibration of Using Rockwell
MECHANICAL-
Rockwell Reference Standardising
HARDNESS 80 HRBW to 100
10 Hardness Blocks Machine as per IS 0.61HRBW
TESTING HRBW
(Test Blocks): HRBW 1586 (Part 3), ISO
MACHINES
Scale 6508-3 & ASTM E18
Calibration of Using Rockwell
MECHANICAL-
Rockwell Reference Standardising
HARDNESS
11 Hardness Blocks Machine as per IS 10 HRC to 35 HRC 0.4HRC
TESTING
(Test Blocks): HRC 1586 (Part 3), ISO
MACHINES
Scale 6508-3 & ASTM E18

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 FMI CALIBRATION LABORATORY, B-7/12, MIDC AREA, MIRAJ, SANGLI,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2374 Page No 3 of 14
Validity 26/03/2021 to 25/03/2023 Last Amended on -

Measurand or Reference
Measurement range and
Material/Type of instrument * Calibration and
Calibration or Measurement additional parameters
S.No Discipline / Group or material to be calibrated Measurement
Method or procedure where applicable(Range
or measured / Quantity Capability(CMC)(±)
and Frequency)
Measured /Instrument

Calibration of Using Rockwell

MECHANICAL-
Rockwell Reference Standardising
HARDNESS
12 Hardness Blocks Machine as per IS 35 HRC to 55 HRC 0.35HRC
TESTING
(Test Blocks): HRC 1586 (Part 3), ISO
MACHINES
Scale 6508-3 & ASTM E18
Calibration of Using Rockwell
MECHANICAL-
Rockwell Reference Standardising
HARDNESS
13 Hardness Blocks Machine as per IS 55 HRC to 70 HRC 0.34HRC
TESTING
(Test Blocks): HRC 1586 (Part 3), ISO
MACHINES
Scale 6508-3 & ASTM E18
Calibration of Using Vickers
MECHANICAL-
Vickers Reference Standardizing
HARDNESS
14 Hardness Blocks Machine as per IS Up to 1500 HV 10 1.2%
TESTING
(Test Blocks): HV 10 1501 (Part 3), ISO
MACHINES
scale 6507-3, ASTM E92
Calibration of Using Vickers
MECHANICAL-
Vickers Reference Standardizing
HARDNESS
15 Hardness Blocks Machine as per IS Up to 1500 HV 20 1.2%
TESTING
(Test Blocks): HV 20 1501 (Part 3), ISO
MACHINES
scale 6507-3 & ASTM E92
Calibration of Using Vickers
MECHANICAL-
Vickers Reference Standardizing
HARDNESS
16 Hardness Blocks Machine as per IS Up to 1500 HV 30 1.2%
TESTING
(Test Blocks): HV 30 1501 (Part 3), ISO
MACHINES
scale 6507-3 & ASTM E92
Calibration of Using Vickers
MECHANICAL-
Vickers Reference Standardizing
HARDNESS
17 Hardness Blocks Machine as per IS Up to 1500 HV 5 1.2%
TESTING
(Test Blocks): HV 5 1501 (Part 3), ISO
MACHINES
scale 6507-3 & ASTM E92

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 FMI CALIBRATION LABORATORY, B-7/12, MIDC AREA, MIRAJ, SANGLI,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2374 Page No 4 of 14
Validity 26/03/2021 to 25/03/2023 Last Amended on -

Measurand or Reference
Measurement range and
Material/Type of instrument * Calibration and
Calibration or Measurement additional parameters
S.No Discipline / Group or material to be calibrated Measurement
Method or procedure where applicable(Range
or measured / Quantity Capability(CMC)(±)
and Frequency)
Measured /Instrument

Calibration of Using Vickers

MECHANICAL-
Vickers Reference Standardizing
HARDNESS
18 Hardness Blocks Machine as per IS Up to 1500 HV 50 1.2%
TESTING
(Test Blocks): HV 50 1501 (Part 3), ISO
MACHINES
scale 6507-3 & ASTM E92
Using Vickers
MECHANICAL- Calibration Vickers Standardizing
HARDNESS Reference Hardness Machine as per IS
19 Up to 1000 HV 0.5 3.3%
TESTING Blocks (Test Block): 1501 (Part 3), ISO
MACHINES HV 0.5 scale 6507-3, ASTM E92 &
ASTM E384
Using Vickers
MECHANICAL- Calibration Vickers Standardizing
HARDNESS Reference Hardness Machine as per IS
20 Up to 232 HV 0.05 7.0%
TESTING Blocks (Test Blocks): 1501 (Part 3), ISO
MACHINES HV 0.05 scale 6507-3, ASTM E92 &
ASTM E384
Using Vickers
MECHANICAL- Calibration Vickers Standardizing
HARDNESS Reference Hardness Machine as per IS
21 Up to 464 HV0.1 7.0%
TESTING Blocks (Test Blocks): 1501 (Part 3), ISO
MACHINES HV 0.1 scale 6507-3, ASTM E92 &
ASTM E384
Using Vickers
MECHANICAL- Calibration Vickers Standardizing
HARDNESS Reference Hardness Machine as per IS
22 Up to 900 HV 0.2 7.0%
TESTING Blocks (Test Blocks): 1501 (Part 3), ISO
MACHINES HV 0.2 scale 6507-3, ASTM E92 &
ASTM E384

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 FMI CALIBRATION LABORATORY, B-7/12, MIDC AREA, MIRAJ, SANGLI,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2374 Page No 5 of 14
Validity 26/03/2021 to 25/03/2023 Last Amended on -

Measurand or Reference
Measurement range and
Material/Type of instrument * Calibration and
Calibration or Measurement additional parameters
S.No Discipline / Group or material to be calibrated Measurement
Method or procedure where applicable(Range
or measured / Quantity Capability(CMC)(±)
and Frequency)
Measured /Instrument

Using Vickers
MECHANICAL- Calibration Vickers Standardizing
HARDNESS Reference Hardness Machine as per IS
23 Up to 1000 HV 0.3 3.5%
TESTING Blocks (Test Blocks): 1501 (Part 3), ISO
MACHINES HV 0.3 scale 6507-3, ASTM E92 &
ASTM E384
Using Vickers
MECHANICAL- Calibration Vickers Standardizing
HARDNESS Reference Hardness Machine as per IS
24 Up to 1000 HV 1 3.2%
TESTING Blocks (Test Blocks): 1501 (Part 3), ISO
MACHINES HV 1 Scale 6507-3, ASTM E92 &
ASTM E384
Using load cell as
MECHANICAL- Force Verification of
per IS 1586 (Part2),
HARDNESS Rockwell hardness
25 IS 1586 (Part 3), ISO 29.42 N to 1471 N 1.4%
TESTING Tester(Direct
6508-2, ISO 6508-3
MACHINES Verification)
& ASTM E18
Using load cell as
MECHANICAL- Force Verification of 0.3% for 29.42 N
per IS 1586 (Part2),
HARDNESS Rockwell hardness 29.42N 98.07 N 0.13% for 98.07 N
26 IS 1586 (Part 3), ISO
TESTING Tester(Direct 147.1 to 1 0.1% for 147.1 to
6508-2, ISO 6508-3
MACHINES Verification) 1471 N%
& ASTM E18
Using Load cell as
MECHANICAL- Force Verification of per IS 1501 (Part 2),
0.2% for 0.4903N
HARDNESS Vickers hardness IS 1501 (Part 3), ISO 0.4903 N 0.9807 N
27 0.1% for 98.07 to
TESTING Tester(Direct 6507-2, ISO 6507-3, to 490.
490.35 N%
MACHINES Verification) ASTM E92 & ASTM
E384

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 FMI CALIBRATION LABORATORY, B-7/12, MIDC AREA, MIRAJ, SANGLI,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2374 Page No 6 of 14
Validity 26/03/2021 to 25/03/2023 Last Amended on -

Measurand or Reference
Measurement range and
Material/Type of instrument * Calibration and
Calibration or Measurement additional parameters
S.No Discipline / Group or material to be calibrated Measurement
Method or procedure where applicable(Range
or measured / Quantity Capability(CMC)(±)
and Frequency)
Measured /Instrument

Using glass scale as

Verification of
MECHANICAL- per IS 1501 (Part 2),
diagonal measuring
HARDNESS IS 1501 (Part 3), ISO
28 system for Vickers 0 to 1.2 mm 0.8%
TESTING 6507-2, ISO 6507-3,
hardness Tester
MACHINES ASTM E92 & ASTM
(Direct Verification)
E384
Verification of Using glass scale as
MECHANICAL-
diameter measuring per IS 1500 (Part 2),
HARDNESS
29 system for Brinell IS 1500 (Part 3), ISO 0 to 6.5 mm 0.6%
TESTING
hardness Tester 6506-2, ISO 6506-3
MACHINES
(Direct Verification) & ASTM E10

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 FMI CALIBRATION LABORATORY, B-7/12, MIDC AREA, MIRAJ, SANGLI,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2374 Page No 7 of 14
Validity 26/03/2021 to 25/03/2023 Last Amended on -

Measurand or Reference
Measurement range and
Material/Type of instrument * Calibration and
Calibration or Measurement additional parameters
S.No Discipline / Group or material to be calibrated Measurement
Method or procedure where applicable(Range
or measured / Quantity Capability(CMC)(±)
and Frequency)
Measured /Instrument

Site Facility
Using Extensometer
calibration fixture,
MECHANICAL-
Electronic probe and 3.0 µm for IS
DIMENSION
1 Extensometer DRO, as per IS Up to 5 mm method 300 µm for
(PRECISION
12872 & ASTM E83 ASTM method
INSTRUMENTS)
by comparison
method
Using Hardness
MECHANICAL- Standard Blocks by
Brinell Hardness
HARDNESS Indirect Method as up to 650 HBW
2 Testing Machine 1.9%
TESTING per IS 1500 (Part 2), 5/750
(HBW 5/750)
MACHINES ISO 6506-2 & ASTM
E10
Using Hardness
MECHANICAL- Brinell Hardness Standard Blocks by
HARDNESS Testing Machine Indirect Method as up to 650 HBW
3 1.3%
TESTING (Scale HBW per IS 1500 (Part 2), 10/3000
MACHINES 10/3000) ISO 6506-2 & ASTM
E10
Using Hardness
MECHANICAL- Brinell Hardness Standard Blocks by
HARDNESS Testing Machine Indirect Method as up to 250 HBW
4 2.2%
TESTING (Scale HBW per IS 1500 (Part 2), 2.5/62.5
MACHINES 2.5/62.5) ISO 6506-2 & ASTM
E10

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 FMI CALIBRATION LABORATORY, B-7/12, MIDC AREA, MIRAJ, SANGLI,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2374 Page No 8 of 14
Validity 26/03/2021 to 25/03/2023 Last Amended on -

Measurand or Reference
Measurement range and
Material/Type of instrument * Calibration and
Calibration or Measurement additional parameters
S.No Discipline / Group or material to be calibrated Measurement
Method or procedure where applicable(Range
or measured / Quantity Capability(CMC)(±)
and Frequency)
Measured /Instrument

Using Hardness
MECHANICAL- Brinell Hardness Standard Blocks by
HARDNESS Testing Machine Indirect Method as up to 250 HBW
5 1.4%
TESTING (Scale: HBW per IS 1500 (Part 2), 10/1000
MACHINES 10/1000) ISO 6506-2 & ASTM
E10
Using Hardness
MECHANICAL- Standard Blocks by
Brinell Hardness
HARDNESS Indirect Method as up to 250 HBW
6 Testing Machine 1.6%
TESTING per IS 1500 (Part 2), 10/500
(Scale: HBW 10/500)
MACHINES ISO 6506-2 & ASTM
E10
Using Hardness
MECHANICAL- Brinell Hardness Standard Blocks by
HARDNESS Testing Machine Indirect Method as up to 650 HBW
7 1.9%
TESTING (Scale: HBW per IS 1500 (Part 2), 2.5/187.5
MACHINES 2.5/187.5) ISO 6506-2 & ASTM
E10
Using Hardness
MECHANICAL- Standard Blocks by
Brinell Hardness
HARDNESS Indirect Method as up to 250 HBW
8 Testing Machine 1.5%
TESTING per IS 1500 (Part 2), 5/250 to
(Scale: HBW 5/250)
MACHINES ISO 6506-2 & ASTM
E10
Using load cell as
MECHANICAL- Force Verification of
per IS 1586 (Part2),
HARDNESS Rockwell hardness
9 IS 1586 (Part 3), ISO 29.42 N to 1471 N 1.4%
TESTING Tester(Direct
6508-2, ISO 6508-3
MACHINES Verification)
& ASTM E18

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 FMI CALIBRATION LABORATORY, B-7/12, MIDC AREA, MIRAJ, SANGLI,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2374 Page No 9 of 14
Validity 26/03/2021 to 25/03/2023 Last Amended on -

Measurand or Reference
Measurement range and
Material/Type of instrument * Calibration and
Calibration or Measurement additional parameters
S.No Discipline / Group or material to be calibrated Measurement
Method or procedure where applicable(Range
or measured / Quantity Capability(CMC)(±)
and Frequency)
Measured /Instrument

Using load cell as

MECHANICAL- Force Verification of 0.3% for 29.42 N
per IS 1586 (Part2),
HARDNESS Rockwell hardness 29.42N 98.07 N 0.13% for 98.07 N
10 IS 1586 (Part 3), ISO
TESTING Tester(Direct 147.1 to 1 0.1% for 147.1 to
6508-2, ISO 6508-3
MACHINES Verification) 1471 N%
& ASTM E18
Using Load cell as
MECHANICAL- Force Verification of per IS 1501 (Part 2),
0.2% for 0.4903N
HARDNESS Vickers hardness IS 1501 (Part 3), ISO 0.4903 N 0.9807 N
11 0.1% for 98.07 to
TESTING Tester(Direct 6507-2, ISO 6507-3, to 490.
490.35 N%
MACHINES Verification) ASTM E92 & ASTM
E384
Using Hardness
MECHANICAL-
Standard Blocks by
HARDNESS Rockwell Hardness 10 HR 45TW to 72
12 Indirect Method as 1.17HR 45TW
TESTING Testing Machine HR 45TW
per IS 1586-2, ISO
MACHINES
6508-2 & ASTM E18
Using Hardness
MECHANICAL-
Standard Blocks by
HARDNESS Rockwell Hardness 10 HRBW to 100
13 Indirect Method as 1.2 HRBW
TESTING Testing Machine HRBW
per IS 1586-2, ISO
MACHINES
6508-2 & ASTM E18
Using Hardness
MECHANICAL-
Standard Blocks by
HARDNESS Rockwell Hardness
14 Indirect Method as 10 HRC to 70 HRC 0.49HRC
TESTING Testing Machine
per IS 1586-2, ISO
MACHINES
6508-2 & ASTM E18

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 FMI CALIBRATION LABORATORY, B-7/12, MIDC AREA, MIRAJ, SANGLI,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2374 Page No 10 of 14
Validity 26/03/2021 to 25/03/2023 Last Amended on -

Measurand or Reference
Measurement range and
Material/Type of instrument * Calibration and
Calibration or Measurement additional parameters
S.No Discipline / Group or material to be calibrated Measurement
Method or procedure where applicable(Range
or measured / Quantity Capability(CMC)(±)
and Frequency)
Measured /Instrument

Using Hardness
MECHANICAL-
Standard Blocks by
HARDNESS Rockwell Hardness 20 HR 45N to 77 HR
15 Indirect Method as 0.82HR 45N
TESTING Testing Machine 45N
per IS 1586-2, ISO
MACHINES
6508-2 & ASTM E18
Using Hardness
MECHANICAL-
Standard Blocks by
HARDNESS Rockwell Hardness
16 Indirect Method as 20 HRA to 95 HRA 0.68HRA
TESTING Testing Machine
per IS 1586-2, ISO
MACHINES
6508-2 & ASTM E18
Using Hardness
MECHANICAL-
Standard Blocks by
HARDNESS Rockwell Hardness 29 HR 30 TW to 82
17 Indirect Method as 1.12HR 30TW
TESTING Testing Machine HR 30TW
per IS 1586-2, ISO
MACHINES
6508-2 & ASTM E18
Using Hardness
MECHANICAL-
Standard Blocks by
HARDNESS Rockwell Hardness 42 HR 30N to 86 HR
18 Indirect Method as 0.77HR 30N
TESTING Testing Machine 30N
per IS 1586-2, ISO
MACHINES
6508-2 & ASTM E18
Using Hardness
MECHANICAL-
Standard Blocks by
HARDNESS Rockwell Hardness 67 HR 15TW to 93
19 Indirect Method as 1.31HR 15TW
TESTING Testing Machine HR 15TW
per IS 1586-2, ISO
MACHINES
6508-2 & ASTM E18
Using Hardness
MECHANICAL-
Standard Blocks by
HARDNESS Rockwell Hardness 70 HR 15N to 95 HR
20 Indirect Method as 0.86HR 15N
TESTING Testing Machine 15N
per IS 1586-2, ISO
MACHINES
6508-2 & ASTM E18

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 FMI CALIBRATION LABORATORY, B-7/12, MIDC AREA, MIRAJ, SANGLI,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2374 Page No 11 of 14
Validity 26/03/2021 to 25/03/2023 Last Amended on -

Measurand or Reference
Measurement range and
Material/Type of instrument * Calibration and
Calibration or Measurement additional parameters
S.No Discipline / Group or material to be calibrated Measurement
Method or procedure where applicable(Range
or measured / Quantity Capability(CMC)(±)
and Frequency)
Measured /Instrument

Verification of depth
MECHANICAL-
measuring system of As per IS 1586 (Part
HARDNESS
21 Rockwell hardness 2), ISO 6508-2 and up to 0.25 mm 0.003mm
TESTING
tester (Direct ASTM E18
MACHINES
Calibration)
Using glass scale as
Verification of
MECHANICAL- per IS 1501 (Part 2),
diagonal measuring
HARDNESS IS 1501 (Part 3), ISO
22 system for Vickers 0 to 1.2 mm 0.8%
TESTING 6507-2, ISO 6507-3,
hardness Tester
MACHINES ASTM E92 & ASTM
(Direct Verification)
E384
Verification of Using glass scale as
MECHANICAL-
diameter measuring per IS 1500 (Part 2),
HARDNESS
23 system for Brinell IS 1500 (Part 3), ISO 0 to 6.5 mm 0.6%
TESTING
hardness Tester 6506-2, ISO 6506-3
MACHINES
(Direct Verification) & ASTM E10
Using Hardness
MECHANICAL- Standard Blocks by
Vickers Hardness
HARDNESS Indirect Method as
24 Testing Machine (HV up to 232 HV0.05 8.4%
TESTING per IS 1501 (Part 2),
0.05)
MACHINES ISO 6507-2, ASTM
E92 & ASTM E384
Using Hardness
MECHANICAL- Standard Blocks by
Vickers Hardness
HARDNESS Indirect Method as
25 Testing Machine (HV up to 464 HV 0.1 7.5%
TESTING per IS 1501-2, ISO
0.1)
MACHINES 6507-2, ASTM E92 &
ASTM E384

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 FMI CALIBRATION LABORATORY, B-7/12, MIDC AREA, MIRAJ, SANGLI,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2374 Page No 12 of 14
Validity 26/03/2021 to 25/03/2023 Last Amended on -

Measurand or Reference
Measurement range and
Material/Type of instrument * Calibration and
Calibration or Measurement additional parameters
S.No Discipline / Group or material to be calibrated Measurement
Method or procedure where applicable(Range
or measured / Quantity Capability(CMC)(±)
and Frequency)
Measured /Instrument

Using Hardness
MECHANICAL- Standard Blocks by
Vickers Hardness
HARDNESS Indirect Method as
26 Testing Machine (HV up to 900 HV0.2 7.4%
TESTING per IS 1501-2, ISO
0.2)
MACHINES 6507-2, ASTM E92 &
ASTM E384
Using Hardness
MECHANICAL- Standard Blocks by
Vickers Hardness
HARDNESS Indirect Method as
27 Testing Machine (hv up to 1350 HV0.3 6.0%
TESTING per IS 1501 (Part 2),
0.3)
MACHINES ISO 6507-2, ASTM
E92 & ASTM E384
Using Hardness
MECHANICAL- Standard Blocks by
Vickers Hardness
HARDNESS Indirect Method as
28 Testing Machine (HV up to 1500 HV0.5 5.6%
TESTING per IS 1501 (Part 2),
0.5)
MACHINES ISO 6507-2, ASTM
E92 & ASTM E384
Using Hardness
MECHANICAL- Standard Blocks by
Vickers Hardness
HARDNESS Indirect Method as
29 Testing Machine (HV up to 1500 HV 1 4.7%
TESTING per IS 1501 (Part 2),
1)
MACHINES ISO 6507-2, ASTM
E92 & ASTM E384
Using Hardness
MECHANICAL- Standard Blocks by
Vickers Hardness
HARDNESS Indirect Method as
30 Testing Machine (HV up to 1500 HV 10 2.2%
TESTING per IS 1501 (Part 2),
10)
MACHINES ISO 6507-2 & ASTM
E92

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 FMI CALIBRATION LABORATORY, B-7/12, MIDC AREA, MIRAJ, SANGLI,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2374 Page No 13 of 14
Validity 26/03/2021 to 25/03/2023 Last Amended on -

Measurand or Reference
Measurement range and
Material/Type of instrument * Calibration and
Calibration or Measurement additional parameters
S.No Discipline / Group or material to be calibrated Measurement
Method or procedure where applicable(Range
or measured / Quantity Capability(CMC)(±)
and Frequency)
Measured /Instrument

Using Hardness
MECHANICAL- Standard Blocks by
Vickers Hardness
HARDNESS Indirect Method as
31 Testing Machine (HV up to 1500 HV 20 2.2%
TESTING per IS 1501 (Part 2),
20)
MACHINES ISO 6507-2 & ASTM
E92
Using Hardness
MECHANICAL- Standard Blocks by
Vickers Hardness
HARDNESS Indirect Method as
32 Testing Machine (HV up to 1500 HV 30 1.9%
TESTING per IS 1501 (Part 2),
30)
MACHINES ISO 6507-2 & ASTM
E92
Using Hardness
MECHANICAL- Standard Blocks by
Vickers Hardness
HARDNESS Indirect Method as
33 Testing Machine (HV up to 1500 HV 5 2.04%
TESTING per IS 1501 (Part 2),
5)
MACHINES ISO 6507-2, ASTM
E92
Using Hardness
MECHANICAL- Standard Blocks by
Vickers Hardness
HARDNESS Indirect Method as
34 Testing Machine (HV up to 1500 HV 50 1.6%
TESTING per IS 1501 (Part 2),
50)
MACHINES ISO 6507-2 & ASTM
E92
Using Clinometer,
MECHANICAL- Load Cell & other
IMPACT Izod Impact Testing instruments &
35 0 to 170 Joule 0.77%
TESTING Machine gauges by direct
MACHINE method as per BS
131-IV: 1972

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 FMI CALIBRATION LABORATORY, B-7/12, MIDC AREA, MIRAJ, SANGLI,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number CC-2374 Page No 14 of 14
Validity 26/03/2021 to 25/03/2023 Last Amended on -

Measurand or Reference
Measurement range and
Material/Type of instrument * Calibration and
Calibration or Measurement additional parameters
S.No Discipline / Group or material to be calibrated Measurement
Method or procedure where applicable(Range
or measured / Quantity Capability(CMC)(±)
and Frequency)
Measured /Instrument

MECHANICAL-
UTM, TENSION Force/Uni-axial Using Force proving
CREEP AND Testing Machine Instruments as per
36 1 kN to 100 kN 0.78%
TORSION (UTM) - Tension IS 1828 and ISO
TESTING Mode 7500
MACHINE
MECHANICAL-
UTM, TENSION Force/Uni-axial Using Force proving
CREEP AND Testing Machine Instruments as per
37 1 kN to 1000 kN 0.54%
TORSION (UTM, CTM)- IS 1828, ISO 7500
TESTING Compression Mode and ASTM E4
MACHINE
* CMCs represent expanded uncertainties expressed at approximately the 95% level of confidence, using a coverage factor of k = 2.

This is annexure to 'Certificate of Accreditation' and does not require any signature.