2 in 1 PIC Heating + Ionic Hair Straightener Brush

User Manual
 Thankyou for purchasing our 2 in 1 PTC Heating + lonic Hair Straightener. A Safety Warn ings:
Brush. Please read through the instructions carefully before use. Retain the aRead all ofthe instructions carefully before use.
manual in a safe place for future reference or pass the manual onto any .This appliance can be used byjuniors aged from 15 years and above and
subsequent users. persons lack of experience and knowledge if they have been given
supervision or instruction concerning the safe use of the appliance and
uhderstand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children unless they are
older than 1 5 years and supervised.
Positive Temperature Coefficient (PTC) heating elements are small aKeep away from water.
ceramic stones with self-limiting temperature characteristics. PTC oUnplug the device immediately after use in order to reduce the risk of death
in case ofan electrical shock.
stones have fast heating response times and plateau once the pre-
defined reference temperature is reached. lt gives even heat distribution .Do not put the device in a place where it can slide into a sink or a bath or do
not keep the device in such a place.
and quicktemperature recovery time.
.Do not use it while you are having a bath.
.Do not immerse or d rop it into water or in another liquid.
olf your device is dropped, unplug immediately. Never insert your hand into
water.
oNever leave the hair straightener device without observation in order to
reduce the risk of burn, electrical shock, fire or damage.
The built-in ionic generator emits negative ions - negatively-charged oClose observation is required in case of usage of any electrical devices by a
atoms and molecules that can interact with the molecular particles in child or a handicapped person or near them. Do not let children to play with
your hair. They seal the hair cuticle reducing frizziness, split ends, hair straightener device.
knotting and increasing hair manageability, leaving hair silky and o lf the cable or the plug of the hair straightener is damaged, not working
I ustro us! properly or dropped into water, never use it. lf this hair straightener cable or
plug is damaged, it must be changed by only a uthorized service technician.
.Keep the electricity cable away from hot surfaces.
aDo not use on sleeping persons.
aDo not use on pets.
aDo not use in open areas, the places where sprays are used or oxygen is
given.
oThe brush heater can get extremely hot during usage. Do not touch the hot
area with exposed skin.
oOnly use this appliance on dry, natural hair without any flammable hair
products put on.
oThis appliance is not suitable for artificial hair.
rThis appliance is not intended for commercial or salon use.
eKeep these instructions in a safe place.

2
 2 in 1 Ionic Hair Straightener Brush Step 1: lnsert power plug into a wall socket. Turn on lonic button, the blue
LED light will come up and stay on. Use this lonic function to tame frizz and
flyaways and ma ke hair ready for stra ightening.

Step 2: To turn on PTC heater for hair straightening function, hold down and
long press PTC heater On/OFF button for 3 seconds, the pTC heater will turn
PTC Heating on with the temperature setting LED light flashing at the last working
Panel tem perature.

Step 3: Short press PTC heater On/OFF button to choose different

temperature settings. The five different temperature settings available are :
'l s0'c-1
70'c- 1 90"c-21 0"c-230'C, or 300"F-340.F-380.F-410.F-450.F.
Step 4_: When th-e brush is heating. up, the.temperature setting LED light will
keep flashing. The.LED light will stop flashihg but stay ori'once ihe set
temperature is reached.

Step 5: Once the temperature setting LED light stays on, the brush is ready to
r,rO'r, (5 Levels) use for hair straightening. Please hold the brush on handle and keep a iafe
.._,.5r distance from exposed skin and eyes.
Temperature Adjusting,/
PTC Heater ON/OFF Button Step.6: Hold certain parts of your hair with clips (which are appropriate for
the thickness ofyour hair) from top, middle, back, front and sid6s in order to
make hair styling operation easier.'
Brush Holder Step 7:. First straightening the lower layers of your hair and then pass to
upper layers. Take a_small.part of your hair and pull tight. Hold the hair
straightener in one ofyour hands and comb your h6ir starting from the root.
Slide the hair straightener on the part of-the hair that i; held without
stopping. Make sure that you are holding the hair straightener from its
holder and cold holding Ilaces. Repeat t-his operation r,intil your hair is
straightened as much as you want.

Step 8: Once the hair straightening is complete, hold down the pTC heater
360 Degree Free button for 3 seconds to turn off the PTC heater. When the hair is cool down,
Rotatable Power Cord you can turn on the lonic function again to give further ionic treatment to
your hair.

To switch temperature display between Celsius("C ) and fahrenheit("F)., (Note: lonic function and PTC heater function can be turned on and used at
please hold down ionic and power button at the same time for the sa me time. The lonic fu nction is to ta me the f rizz and flyaways and ma ke
your hair smooth and sleek. The PTC heater function is io striighten and
three seconds. style your hair. )
4
 AAttention:
a For the first time usage of the appliance, occasionally there may be a slight
Your hair straightener has an automatic turning offfeature for your
security. The hair stra ig htener turns off after a usage of 30min utes. lf you burning smell or very light smoke, which is caused by the slight residual oil on the
want to use it again, you can press and hold down the power button to PTC heater metal parts burning offwhen heated-This is normal and safe to use-This

turn backon the appliance. may only last for a few seconds.
alt is important to set the appropriate working temperature for your hair before
usage i n order to prevent you r hai r to get ry or da maged.
r3 awhen the PTC
d

heater is on, the brush can get extremely hot, make sure you are
I

keepi ng it away from eyes, nose, ha nds, neck a nd facia Ia reas.

The default operating temperature setting is 190'C (380'F). You can

short press the temperature adjusting button to adjust the operatlng
temperature. Once the temperature is set, the temperature LED setting
light will start flashing. It will stop flashing and stay on when the set
temperature is reached.
oUnplug the appliance and allowto cool.
oWipe allthe surfaces with a damp cloth.
aDo not use harsh or abrasive cleaning agents or solvents
astore the appliance in dry and cool place.

,-Level L, around 150'C (300"F), suitable for first time user or user with
and fine hair, or bleached hair.
-thin
EELevel 2, around 170'C (340'F), suitable for byed or dark color hair.
ElELevel 3 & Level 4, around 190'C (380'F) to 210'C (410'F), suitable for Defects affecting product functionality appearing within the guarantee period will
EEEnormal or slightly curled hair. be corrected by replacement or repair at our option provided the product is used
groyn9 230'C (450'F), suitable for thick and very curly hair, or and maintained in accordance with the instructions.
@le..ygl ll
orllrcutt to styte narr.
t Defects from repair by an unauthorized dealer are not covered. Consumables are
excl uded. Your statutory rig hts a re not affected.
Product Name: 2 in 1 lonic Hair Straightener Brush
I nput Voltage: 1 00-240V

Freq uency: 50-60H2

Rated Power:30W
Heating Mode: PTC heating
lonic lnput: DC5V
lonic power:< 1 W
Anions Concentration: above 6 million PCs/CM3
Heating Temperature: Approx. 1 50-230"C
NetWeight:5009
Gross Weig ht: 6509
Product Size: 270*70x40mm
Package Size: 345*1 23x68mm

0@To avoid environmental and health problems due to hazardous substances in

electrical and electronic goods, appliances marked with this symbol must not be
disposed ofwith unsorted municipal waste, but recovered, reused or recycled.
i
Note: Our company reserve the right to change the specifications of the product
without further notice.