IMPORTANT RATES AND DATAS FOR BUILDING

WORKS
(Worked out as per SSR 2023-24)

.
 Lead Statement 2023-24 (conveaynce of lead for Example 1 Km)
BUILDING WORKS (Pl Prepare the estimates seniorage charges separately )
S. Material Machine
Blasting Conveyance
No per Item No Initial cost Crushing Lead charges
Loading Unloading Total Cost
Charges
Charges
1 Sand for Mortor for Plastering 1Cum 721.00 1 37.30 0 0 758.30
MAT-00029
2 Sand for Concrete 1Cum 605.00 1 37.30 0 0 642.30
MAT-00027
3 Sand for fillling 1Cum 460.00 1 37.30 0 0 497.30
MAT-00028
4 6mm size HBG Metal SS 5 1Cum 661.00 70.00 165.25 1 35.90 0 0 932.15
MAT-00215
5 10mm size HBG Metal SS 5 1Cum 831.00 70.00 207.75 1 35.90 0 0 1144.65
MAT-00216
6 12mm size HBG Metal SS 5 1Cum 989.00 70.00 247.25 1 35.90 0 0 1342.15
MAT-00217
7 20mm size HBG Metal SS 5 1Cum 1242.00 70.00 310.50 1 35.90 0 0 1658.40
MAT-00218
8 40mm size HBG Metal SS5 1Cum 744.00 70.00 186.00 1 35.90 0 0 1035.90
MAT-00220
9 40mm size HBG Metal SS5 ( Hand
1Cum 744.00 70.00 1 35.90 0 0 849.90
broken) MAT-00220
10 2nd Class Bricks 1000Nos BMT-A.01 8164.00 1 59.80 73.00 73.00 8369.80
11 Fly ash solid Bricks 290
x 225 x 140 mm 1000Nos BMT-A.10 33000.00 1 299.00 73.00 73.00 33445.00

12 Cement Exc GST 1Mt MAT-00005 4220.00 4220.00

13 Steel Fe415 Exc GST APRIL 2023 1Mt 61000.00 61000.00
14 Steel Fe500 2 Exc GST APRIL 2023 1Mt 64500.00 64500.00
15 Steel MS Flats Exc GST APRIL 2023 1Mt 61000.00 61000.00
16 Gravel (for Gravel Sub Base) 1Cum MAT-05253 155.00 1 37.30 0 0 192.30
17 For Granualr Sub Based Gravel 1Cum MAT 00178 116.00 1 37.30 0 0 153.30
18 Quarry Rubbish 1Cum MAT-00473 96.00 1 37.30 0 0 133.30
 ROAD WORKS
S.No Material Machine
Blasting Conveyance
per Quarry Initial cost Crushing Lead excludiing 14%
Loading Unloading Total Cost
Charges
Charges
1 Sand for Mortor for Plastering 1Cum 721.00 1 37.30 0 0 758.30
MAT-00029
2 Sand for Concrete 1Cum 605.00 1 37.30 0 0 642.30
MAT-00027
3 Sand for fillling 1Cum 460.00 1 37.30 0 0 497.30
MAT-00028
4 Gravel (for Gravel Sub Base) 1Cum MAT-05253 155.00 1 37.30 0 0 192.30
5 Selected Earth 1Cum MAT 00252 135.00 1 37.30 0 0 172.30
5 HBG Stone Chips 2.36mm and below
1Cum MAT-00068 450.00 0 0 1 35.90 0 0 485.90

6 2.36 to 5 mm size 1Cum 471.00 70.00 117.75 1 35.90 0 0 694.65

MAT-00434
7 5 to 7mm size 1Cum 629.00 70.00 157.25 1 35.90 0 0 892.15
MAT-00435
8 9.5 to 11.2mm size 1Cum 812.00 70.00 203.00 1 35.90 0 0 1120.90
MAT-00436
9 12mm to 14 mm size 1Cum 919.00 70.00 229.75 1 35.90 0 0 1254.65
MAT-00437
10 19 mm to 22 mm size 1Cum 1130.00 70.00 282.50 1 35.90 0 0 1518.40
MAT-00438
11 25 mm to 27 mm size 1Cum 1124.00 70.00 281.00 1 35.90 0 0 1510.90
MAT-00439
12 40 mm to 45 mm size 1Cum 720.00 70.00 180.00 1 35.90 0 0 1005.90
MAT-00440
13 50 mm to 55 mm size 1Cum 536.00 70.00 0.00 1 35.90 0 0 641.90
MAT-00441
14 60 mm to 63 mm size 1Cum 492.00 70.00 0.00 1 35.90 0 0 597.90
MAT-00442
15 65 mm size 1Cum 360.95 70.00 0.00 1 35.90 0 0 466.85
MAT-00443
16 75 mm size 1Cum 289.50 0.00 0.00 1 35.90 0 0 325.40
MAT-00444
17 Cement Exc GST
1Mt MAT-00005 4220.00 4220.00

18 Steel Fe415 Exc GST APRIL 2023 1Mt 61000.00 61000.00

 DATA (ROAD WORK) - SSR 2023-24 (EXCLUDING GST)

OHCP 13.615% Add MA/AA 0%

Sl.
Description of Item Unit Qty Rate Amount
No.
1 2 3 4 5 6 7
1 RBR- Clearing and grubbing road land by mechanical means including uprooting wild
STCL- vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm,
2 removal of stumps of such trees cut earlier and disposal of unserviceable
materials and stacking of serviceable material to be used or auctioned, upto a
lead of 1000 m including removal and disposal of top organic soil not exceeding
150 mm in thickness as per Technical Specification Clause 201 MORD / MORTH
including over head charges&contractors profit but excluding GST and
Seignorage Charges.

Unit = 10 sqm
Taking output = 1 hectare
By Machanical Means
In area of non-thorny jungle (light jungle)
Taking out put = 1 Hectare
a) Labour
Mazdoor (un-skilled) day 4.16 560.00 2329.60
Add Agency Allowance 0.000% 0.00
b) Machinery
Dozer D-50 with attachment or suitable machinery for hour 10.00 1907.00 19070.00
removal of trees & stumps
Tractor with trolley 3t hour 1.00 543.00 543.00
21942.60
c) Add Overhead charges and contractors profit 13.615% 2987.48
Rate per Hectare 24930.08
Rate per 1 Sqm (a+b+c+d)/10000 2.49
RBR- Cutting of trees, including cutting of trunks, branches and removal of stumps &
STCL- roots, refilling, compaction of backfilling and stacking of serviceable material by
2
3(A) manual means with all lifts as per Technical Specification Clause 201MORD /
(iii) MORTH including overhead & Contractor profit.
Lead upto 100 m
Unit = each
Girth above 900 mm to 1800 mm
a) Labour
Mate day -
Mazdoor (Unskilled) day 2.08 560.00 1,164.80
Add Agency Allowance 0.000% 0.00
b) Machinery
Tractor with trolley 3t hour 0.28 543.00 152.04
Total 1,316.84
c) Add Overhead charges and contractors profit 13.615% 179.29
Rate per 1 No 1496.13
Uprooting and Removing Stumps & roots, compaction of backfilling and stacking
RBR- of servicable material by manual means as per Technical Specification Clause
3
STCL-4 201. as per Technical Specification Clause 201MORD / MORTH including
overhead & Contractor profit.
Lead upto 100 m
Unit = each
Girth above 900 mm to 1800 mm
a) Labour
Mate day -
Mazdoor (Unskilled) day 0.416 560.00 232.96
Add Agency Allowance 0.000% 0.00
b) Machinery
Sl.
Description of Item Unit Qty Rate Amount
No.
Tractor with trolley 3t hour 0.018 543.00 9.77
Total 242.73
c) Add Overhead charges and contractors profit 13.615% 33.05
Rate per 1 No 275.78
4 RBR- Construction of embankment with material obtained from road way
EECD- cutting by using Machinery
3 Construction of embankment with approved materials deposited at site from
roadway cutting and excavation from drain (not exceeding 0.6 m depth) and
foundation of other structures graded and compacted with 8 to 10 T capacity
vibratory roller to meet requirement of Tables 300.1 and 300.2 as per Technical
Specification Clause 301.5 MORD/ 305 MORTH using machinery including
overhead & Contract profit but excluding GST & Seignorage Charges.

Taking output = 100 cum

a) Labour
Mate
Mazdoor(un skilled) day 0.52 560.00 291.20
Add Agency Allowance 0.000% 0.00
b) Machinery
Dozer D-50 for spreading @ 200 cum per hour hour 0.50 1907.00 953.50
Tractor with grader for grading @ 25 cum per hour hour 4.00 531.00 2124.00
Water tanker 6kl capacity hour 2.00 822.00 1644.00
Vibratory Roller 80-100 KN @100cum per hour hour 1.00 3499.60 3499.60
8512.30
c) Add Overhead charges and contractors profit 13.615% 1158.95
Rate for 100 cum 9671.25
96.71
Add S&C Charges Cum 1.00 0.00 0.00
Rate per cum 96.71
5 RBR- Construction of Embankment with Material Obtained from Borrow pits
EECD- by Machinery
4 Construction of embankment with approved material obtained from borrow pits
with all lifts, transporting to site, spreading, grading to required slope and
compacting with 8 to 10 T capacity vibratory roller to meet requirement of
Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification
Clause 301.5 MORD/ 305 MORTH using machinery including overhead charges
& Contractor profit, But excluding GST & Seignorage charges.

Taking output = 100 cum

a) Labour
Mazdoor day 1.04 560.00 582.40
Add Agency Allowance 0.000% 0.00
b) Machinery
Hydraulic Excavator 0.9 cum bucket capacity @ 60 cum hour 1.67 3561.50 5947.71
per hour
Tipper 5.5cum with 10T capacity hour 4.50 1242.70 5592.15
Dozer D50 for spreading @ 200 cum per hour hour 0.50 1907.00 953.50
Tractor with Grader @ 25 cum per hour hour 4.00 531.00 2124.00
Water tanker 6 KL capacity hour 2.00 822.00 1644.00
Vibratory Roller 80-100 KN @100cum per hour hour 1.00 3499.60 3499.60
20343.36
Basic rate of formation of road with borrow soils per Cum 203.43
Add Overhead charges and contractors profit 13.615% 27.70
231.13
Add S&C Charges Cum 1.00 0.00 0.00
Rate per cum 231.13
Sl.
Description of Item Unit Qty Rate Amount
No.
6 RBR- Construction of improved subgrade by providing selected earth having minimum
EECD- CBR of 10%, MDD not less than 1.85 g/cc with LL & PI not more than 40% and
15 20 respectively and spreading in uniform layers with tractor grader on prepared
surface, and compacted at OMC with vibratory roller 80-100 kN as per
Technical Specification Clause 303 MORD by using machinery including
contractors profit,Over head charges, GST and Seignaorage charges etc
complete

Taking output = 100 cum

Unit = 1 Cum
a) Labour
Mazdoor day 1.04 560.00 582.40
Add Agency Allowance 0.000% 0.00
b) Machinery
Hydraulic Excavator 0.9 cum bucket capacity @ 60 cum hour 1.00 3561.50 3561.50
per hour
Tipper 5.5cum with 10T capacity hour 4.50 1242.70 5592.15
Dozer D50 for spreading @ 200 cum per hour hour 0.50 1907.00 953.50
Motor grader for grading @ 200 cum per hour hour 0.50 3796.00 1898.00
Water tanker 6 KL capacity hour 2.00 822.00 1644.00
Vibratory Roller 80-100 KN @100cum per hour hour 1.25 3499.60 4374.50
Material
Water kl 12.00 99.00 1188.00
Cost of earth / Compensation for earth taken from cum 100.00 172.30 17230.00
priGSTe land (M092)
37024.05
Basic rate of formation of road with borrow soils per Cum 370.24
Add Overhead charges and contractors profit 13.615% 50.41
420.65
Add S&C Charges Cum 1.00 0.00 0.00
Rate per cum 420.65
7 Excavation for roadway in soil using manual means for carrying of cut earth to
embankment site with initial lift of 3 mts and lead upto 50 m as per Technical
Specification Clause 302.3 MORD Including All Over Heads , And Contractors
Profit But Excluding GST And Seigniorage Charges

Unit = cum
Taking output = 120 cum
a) Labour
Mate day -
Mazdoor (Unskilled) day 46.80 560.00 26208.00
Add Agency Allowance 0.000% 0.00
Rate per 120 Cum 26208.00
Rate per 1 Cum 218.40
e) Add Overhead charges and contractors profit 13.615% 29.74
248.14
Add S&C Charges Cum 1.00 0.00 0.00
Rate per cum 248.14
8 RBR- Scarifying existing granular surface to a depth of 50 mm and disposal of
EECD- scarified material with a lift upto 3 m and leads upto 1000 m as per Technical
1 (i) Specification Clause 301.4. MORD including over head charges&contractors
profit but excluding GST and Seignorage Charges.

Unit = sqm
Taking output = 100 sqm
a) Labour
Mate day - - -
Mazdoor (Unskilled) day 4.16 560.00 2329.60
Add Agency Allowance 0.000% 0.00
b) Machinery
Sl.
Description of Item Unit Qty Rate Amount
No.
Tractor with trolley hour 1.50 543.00 814.50
3144.10
f) Add Overhead charges and contractors profit 13.615% 428.07
Rate per 100 Sqm 3572.17
Rate per 1 Sqm 35.72
9 RBR- Scarifying the existing bituminous road surface to a depth of 50 mm and
EECD- disposal of scarified material with all lifts and lead upto 1000 m as per Technical
2 (ii) Specification Clause 305.4.3 MORTH including over head charges&contractors
profit but excluding GST and Seignorage Charges.
Unit = sqm
Taking output = 100 sqm
a) Labour
Mate day - - -
Mazdoor (Unskilled) day 0.26 560.00 145.60
Add Agency Allowance 0.000% 0.00
b) Machinery
Tractor with ripper attachment @ 60 cum per hour hour 0.08 543.00 43.44
Front end loader 1 cum bucket capacity @ 50 cum per hour 0.20 2023.00 404.60
hour
Tipper 5.5 cum capacity, 4 trips per hour hour 0.23 1242.70 285.82
879.46
f) Add Overhead charges and contractors profit 13.615% 119.74
Rate per 100 Sqm 999.20
Rate per 1 Sqm 9.99
10 Picking old metalled surface to a depth of 40 to 100 mm and spreading metal
including watering with an initial lead of 2 Hectometers and rolling with power
rollers watering and power roller rolling including hire charges of power roller( 8
to 10 T ) barricading and diversion of traffic and wetting the new consolidation
for a fortnight(for compacted thickness of ) Including All Over Heads , And
Contractors Profit But Excluding GST And Seigniorage Charges

Rate as per SSR for 75mm thick 10 Sqm 1.00 231.00 231.00
Rate per 1 Sqm 23.10
e) Add Overhead charges and contractors profit 13.615% 3.15
Rate per 1 Sqm 26.25
11 Cement Stabilisation for improving subgrade
Cement stabilisation for improviding subgrade: Laying and spreading available
soil in the subgrade on a prepared surface, pulverising, mixing the spread soil in
place with rotavatorwith 4% of cement, grading with tractor grader and
compacting with the smooth wheel road roller at 80-100 kN OMC to the desired
density to form a layer of improved sub grade as per technical specificaiton
clause 403 MoRD includng contractors profit and overhead charges but
excluding GST and Seignorage Charges etc complete

(B) By Mechanical Means

Unit - Cum
Taking out put = 300 cum
a) Labour
Mazdoor (Skilled) day 1.36 560.00 761.60
Mazdoor (Un-Skilled) day 8.00 560.00 4480.00
Add Agency Allowance 0.000% 0.00
b) Machinery
Tractor with ripper and rotavatorattachments @ 60cum hour 12.00 543.00 6516.00
per hour for ripping and 25 cum per hour for mixing
Tractor grader @ 25 cum per hour hour 12.00 531.00 6372.00
Three wheel Roller 80-100 kN static roller @ 70 Cum/Hr hour 4.30 1743.60 7497.48
Water tanker 6 KL capacity hour 5.00 822.00 4110.00
c) Material
Cement @ 4% T 21.00 4220.00 88620.00
Cost of Selected earth cum 360.00 172.30 62028.00
Sl.
Description of Item Unit Qty Rate Amount
No.
Water cum 30.00 99.00 2970.00
Basic rate for 300 cum 183355.08
Basic rate Per cum 611.18
c) Add Overhead charges and contractors profit 13.615% 83.21
694.39
Add S&C Charges cum 1.00 0.00 0.00
Rate per Cum including conveyance 694.39
12 Cement Treated Soil Sub Base / Base
Cement Treated Soil Sub Base: Providing, laying and spreading soil on a
prepared sub grade, pulverising, adding the designed quantity of cement to the
spread soil, mixing in place with rotaGSTor, grading with the motor grader and
compacting with the smooth wheel road roller / vibratory roller 80-100 kN at
OMC to achieve the desired unconfined compressive strength and to form a
layer of sub base / base as per technical specification clause 404 MoRD
including contractors profit and overhead charges but excluding GST and
Seignorage Charges

(B) By Mechanical Means

Unit - Cum
Taking out put = 300 cum (525 T)
For 4% quantity of cement by weight of soil
a) Labour
Mazdoor (Skilled) day 2.48 560.00 1388.80
Mazdoor (Un-Skilled) day 10.00 560.00 5600.00
Add Agency Allowance 0.000% 0.00
b) Machinery
Hydraulic Excavator 0.90 cum bucket capacity hour
Tipper 5.50 Cum hour
Tractor grader @ 25 cum per hour hour 12.00 543.00 6516.00
Vibratory Roller 80-100 KN @100cum per hour hour 6.00 3499.60 20997.60
Tractor with rotavatorand blade @ 25 cum per hour hour 12.00 531.00 6372.00
Water tanker 6kl capacity hour 5.00 822.00 4110.00
c) Material
Cement @ 4% T 21.00 4220.00 88620.00
9.5 mm to 4.75 mm @ 66% cum 237.60 902.57 214449.84
2.36 mm below @ 34% cum 122.40 694.65 85025.16
Water cum 30.00 99.00 2970.00
Basic rate for 300 cum 436049.40
Basic rate Per cum 1453.50
c) Add Overhead charges and contractors profit 13.615% 197.89
1651.39
Add S&C Charges cum 1.00 0.00 0.00
Rate per Cum including conveyance 1651.39
13 RBR- Gravel / Soil - Aggregate Base (Table 400.2) Grading C
SBBS- Construction of granular sub-base/shoulders using Gravel & sand by providing
2 well graded material, spreading in uniform layers with motor grader on
prepared surface, mixing by mix in place method with rotavator at OMC, and
compacting with Vibratory Roller 80-100 kN capacity to achieve the desired
density, complete as per Technical Specification Clause 402 MORD, including
overhead charges & Contractor profit, But excluding GST & Seignorage charges.

Taking out put = 300 cum

a) Labour
Mazdoor (Skilled) day 2.40 560.00 1344.00
Mazdoor (Un-Skilled) day 8.00 560.00 4480.00
Add Agency Allowance 0.000% 0.00
b) Machinery
Vibratory Roller 80-100 KN hour 6.00 3499.60 20997.60
Water tanker 6kl capacity hour 5.00 822.00 4110.00
Tractor with grader @ 25 cum per hour hour 12.00 543.00 6516.00
Sl.
Description of Item Unit Qty Rate Amount
No.
Tractor with rotavator@ 25 cum per hour hour 12.00 543.00 6516.00
c) Material
Well graded granular sub-base material as per table 400.2
Cost of Materials
9.5 mm to 4.75 mm @ 66% (Gravel) cum 237.60 902.57 214449.84
2.36 mm below @ 34% (Sand) cum 122.40 497.30 60869.52
Basic rate of Granular sub base for 300 cum 319282.96
Basic rate of Granular sub base cum 1064.28
c) Add Overhead charges and contractors profit 13.615% 144.90
1209.18
Add S&C Charges
Gravel cum 0.79 0.00 0.00
Sand cum 0.41 0.00 0.00
Rate per Cum including conveyance 1209.18
14 RBR- Gravel / Soil - Aggregate Base (Table 400.2) Grading C
SBBS- Construction of granular sub-base/shoulders by providing well graded Grading
2 III material, spreading in uniform layers with motor grader on prepared surface,
mixing by mix in place method with rotavator at OMC, and compacting with
Vibratory Roller 80-100 kN capacity to achieve the desired density, complete as
per Technical Specification Clause 402 MORD, including overhead charges &
Contractor profit, But excluding GST & Seignorage charges.

Taking out put = 300 cum

a) Labour
Mazdoor (Skilled) day 2.40 560.00 1344.00
Mazdoor (Un-Skilled) day 8.00 560.00 4480.00
Add Agency Allowance 0.000% 0.00
b) Machinery
Vibratory Roller 80-100 KN hour 6.00 3499.60 20997.60
Water tanker 6kl capacity hour 5.00 822.00 4110.00
Tractor with grader @ 25 cum per hour hour 12.00 543.00 6516.00
Tractor with rotavator@ 25 cum per hour hour 12.00 543.00 6516.00
c) Material
Well graded granular sub-base material as per table 400.2
Cost of Materials
9.5 mm to 4.75 mm @ 66% cum 237.60 902.57 214449.84
2.36 mm below @ 34% cum 122.40 694.65 85025.16
Basic rate of Granular sub base for 300 cum 343438.60
Basic rate of Granular sub base cum 1144.80
c) Add Overhead charges and contractors profit 13.615% 155.86
1300.66
Add S&C Charges
Gr III Metal cum 1.20 0.00 0.00
Rate per Cum including conveyance 1300.66
15 RBR- WBM Grading 2 (using Graded Metal)
SBBS- Providing, laying, spreading and compacting stone aggregates of specific sizes
9 to water bound macadam specification including spreading in uniform thickness,
hand packing, rolling with Vibratory Roller 80-100 KN in stages to proper grade
and camber, applying and brooming, stone screening/binding materials to fill-up
the interstices of coarse aggregate, watering and compacting to the required
density grading 2 as per Technical Specification Clause 405 MORD by manual
means using HBT metal 60-63 mm (50%),40-45 mm metal (46%) and HBG
machine crushed metal 19-22 mm(4%) for compacted thickness of 75 mm
including overhead charges & Contractor profit, but excluding GST &
Seignorage charges. ((For Profile corrective course using 25% new Grade II
HBG Metal)

By manual Means
Taking out put = 360 cum
Sl.
Description of Item Unit Qty Rate Amount
No.
a) Labour
Mazdoor (Skilled) day 12.08 560.00 6764.80
Mazdoor (unskilled) day 250.00 560.00 140000.00
Add Agency Allowance 0.000% 0.00
b) Machinery
Vibratory Roller 80-100 KN @60cum per hour hour 6.00 3499.60 20997.60
Water tanker 6kl capacity hour 24.00 822.00 19728.00
c) Material
Cost of materials
60-63 mm IRC HBT Metal (25% of 50% of 435.60 cum) Cum 54.45 597.90 32555.66
40-45 mm IRC HBT Metal (25% of 46% of 435.60 cum) Cum 50.10 1005.90 50395.59
19-22 mm IRC HBG M/C Metal (25%x4% of 435.60 cum) Cum 4.36 1518.40 6620.22
Stone Screening
Type B 11.2 mm for Grading 2 @ 0.18 / 0.20 cum/10sqm cum 86.40 793.40 68549.76
(Average rate of 5-7mm & 2.36-5mm)

Binding Material @ 0.06 cum per 10 sqm for Grading 2 cum 28.80 192.30 5538.24
material
Basic rate of WBM-Gr-II for 360 cum 351149.87
d) Basic rate of WBM -Gr-II cum 975.42
e) Add Overhead charges and contractors profit 13.615% 132.80
1108.22
Add S&C Charges
Gr II Metal cum 0.623 0.00 0.00
Rate per Cum including conveyance 1108.22
16 RBR- WBM Grading 2 (using Graded Metal)
SBBS- Providing, laying, spreading and compacting stone aggregates of specific sizes
9 to water bound macadam specification including spreading in uniform thickness,
hand packing, rolling with Vibratory Roller 80-100 KN in stages to proper grade
and camber, applying and brooming, stone screening/binding materials to fill-up
the interstices of coarse aggregate, watering and compacting to the required
density grading 2 as per Technical Specification Clause 405 MORD by manual
means using HBT metal 60-63 mm (50%),40-45 mm metal (46%) and HBG
machine crushed metal 19-22 mm(4%) for compacted thickness of 75 mm
including overhead charges & Contractor profit, but excluding GST &
Seignorage charges.

By manual Means
Taking out put = 360 cum
a) Labour
Mazdoor (Skilled) day 12.08 560.00 6764.80
Mazdoor (unskilled) day 250.00 560.00 140000.00
Add Agency Allowance 0.000% 0.00
b) Machinery
Vibratory Roller 80-100 KN @60cum per hour hour 6.00 3499.60 20997.60
Water tanker 6kl capacity hour 24.00 822.00 19728.00
c) Material
Cost of materials
60-63 mm IRC HBT Metal (50% of 435.60 cum) Cum 217.80 597.90 130222.62
40-45 mm IRC HBT Metal (46% of 435.60 cum) Cum 200.38 1005.90 201562.24
19-22 mm IRC HBG M/C Metal (4% of 435.60 cum) Cum 17.42 1518.40 26450.53
Stone Screening
Type B 11.2 mm for Grading 2 @ 0.18 / 0.20 cum/10sqm cum 86.40 793.40 68549.76
(Average rate of 5-7mm & 2.36-5mm)

Binding Material @ 0.06 cum per 10 sqm for Grading 2 cum 28.80 192.30 5538.24
material
Basic rate of WBM-Gr-II for 360 cum 619813.79
d) Basic rate of WBM -Gr-II cum 1721.70
Sl.
Description of Item Unit Qty Rate Amount
No.
e) Add Overhead charges and contractors profit 13.615% 234.41
1956.11
Add S&C Charges
Gr II Metal cum 1.530 0.00 0.00
Rate per Cum including conveyance 1956.11
17 RBR- WBM Grading 3 (using Graded Metal)
SBBS- Providing, laying, spreading and compacting stone aggregates of specific sizes
9 to water bound macadam specification including spreading in uniform thickness,
hand packing, rolling with Vibratory Roller 80-100 KN in stages to proper grade
and camber, applying and brooming, stone screening to fill-up the interstices of
coarse aggregate, watering and compacting to the required density Grading 3
as per Technical Specification Clause 405 MORD/ MORTH 404 by manual means
using HBG machine crushed metal of 40-45 mm (82%) and 19-22 mm (18%)
for compacted thickness of 75 mm, including overhead charges & Contractor
profit, But excluding GST & Seignorage charges.

By manual Means
Taking Output = 360 cum
a) Labour
Mazdoor (Skilled) day 12.08 560.00 6764.80
Mazdoor (unskilled) day 250.00 560.00 140000.00
Add Agency Allowance 0.000% 0.00
b) Machinery
Vibratory Roller 80-100 KN @60cum per hour hour 6.00 3499.60 20997.60
Water tanker 6kl capacity hour 24.00 822.00 19728.00
c) Material
Cost of materials
40-45 mm IRC HBG M/c Metal ( 82% of 435.60 Cum) Cum 357.19 597.90 213563.90
19-22.40 mm IRC HBG M/c Metal ( 18% of 435.60 cum) Cum 78.41 1518.40 119057.74

Stone Screening
Type -B 11.2mm @ 0.18 cum per 10 sqm cum 86.40 485.90 41981.76
(rate of 2.36 mm & below)
Binding Material
Basic rate of WBM-Gr-III for 360 cum 562093.80
d) Basic rate of WBM -Gr-III cum 1561.37
e) Add Overhead charges and contractors profit 13.615% 212.58
1773.95
Add S&C Charges
Gr II Metal cum 1.450 0.00 0.00
Rate per Cum including conveyance 1773.95
18 RBR- Wet Mix Macadam
SBBS- Providing, laying, spreading and compacting graded stone aggregate to wet mix
11 macadam specification including premixing the material with water at OMC in
mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying
in uniform layers in sub-base/base course on a well prepared sub-base and
compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100
kN weight to achieve the desired density including lighting, barricading and
maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical
Specification Clause 406 MORD/ MORTH,including overhead charges &
Contractor profit, But excluding GST

By Mechanical Means with 1 km lead

A Rural Works
Unit = cum
Taking output = 100 cum
a) a) Labour
Mate day - - -
Dresser (Skilled) for alignment day 8.00 670.00 5360.00
Mazdoor (Skilled) day 2.40 560.00 1344.00
Sl.
Description of Item Unit Qty Rate Amount
No.
Add Agency Allowance 0.000% 0.00
b) Machinery
Front end loader 1 cum capacity hour 4.00 2023.00 8092.00
Wet mix plant (Pug Mill) hour 4.00 1984.00 7936.00
Tipper or dumper (10 t) Capacity hour 5.00 1242.70 6213.50
Motor grader @ 50 cum capacity hour 2.00 3796.00 7592.00
Vibratory Roller 80-100 KN @60cum per hour hour 1.67 3499.60 5844.33
Water tanker 6kl capacity hour 1.33 822.00 1093.26
c) Material
Cost of materials
Coarse aggregate 45 to 22.4 mm using M/C metal @ 30% cum 39.90 1345.07 53668.16
(Average of 40-45 mm,25-27 mm& 19-22 mm metal)

Aggregates 22.4 mm to 2.36 mm using M/C metal @ 40% cum 53.20 1096.15 58315.18
(Average of 19-22mm,12-14mm,9.5-11.20 mm,5-7mm &
2.36-5 mm metal)
Fine aggregate/crushed sand 2.36 mm to 75 mm micron cum 39.90 497.30 19842.27
@ 30%
Basic rate of WMM for 100Cum 175300.70
d) Basic rate of WMM per Cum 1753.01
e) Add Overhead charges and contractors profit 13.615% 238.67
1991.68
Add S&C Charges
Metal cum 1.330 0.00 0.00
Rate per 1 cum 1991.68
19 Modified Penetration Macadam
Construction of penetration macadam over prepared base by providing a layer
of compacted crushed coarse aggregate using chips spreader with alternate
applications of bituminous binder and key aggregates and rolling with a three
wheel 80-100 kN static roller as per Tech. Specification No 506 MORD.

B 75 mm thick
Unit = sqm
Taking output = 4500 sqm (337.5 cum)
(I) Bitumen (S-90)
a) Labour
Mate day -
Mazdoor (Unskilled) day 8.000 560.00 4480.00
Mazdoor (Skilled) day 2.400 560.00 1344.00
Add Agency Allowance 0.000% 0.00
b) Machinery
Hydraulic self propelled chip spreader both for aggregates hour 6.000 3264.00 19584.00
and key aggregates @ 1500 sqm per hour for 4500 x 2
sqm = 9000 sqm
Bitumen pressure distributor for @ 1750 sqm per hour hour 2.570 1907.00 4900.99
Tipper 5.5 cum capacity for carriage of aggregates from hour 10.000 1242.70 12427.00
stockpile to chip spreader
Three wheel 80-100 kN Static Roller hour 33.750 1743.60 58846.50
Front end loader 1 cum bucked capacity hour 6.000 2023.00 12138.00
c) Material
Bitumen @ 2 kg per sqm t 9.000 33210.00 298890.00
40 mm size hand broken metal @ 0.09 cum per sqm cum 405.000 849.90 344209.50
12 mm size stone chips @ 0.018 cum per sqm cum 81.000 1342.15 108714.15
865534.14
Add Overhead charges and contractors profit 13.615% 117842.47
Cost of 4500 sqm = a+b+c+d+e 983376.61
218.53
Add S&C Charges
Metal cum 0.108 0.00 0.00
Sl.
Description of Item Unit Qty Rate Amount
No.
Rate per 1 Sqm 218.53
Rate per Cum 2913.73
20 RBR- Bituminous Macadam
BASC- Providing and laying bituminous macadam with 40-60 TPH hot mix plant using
3 crushed aggregates of grading as per Table 500.4 premixed with bituminous
binder, transported to site upto a lead of 1000 m laid over a previously
prepared surface with paver finisher to the required grade, level and alignment
and rolled to achieved the desired compaction as per Technical Specification
Clause 504 MORD (using vibratory Roller 80-100 KN for intermediate rolling and
3 wheel roller 80-100 KN for initial and final rolling)., including overhead
charges & Contractor profit, But excluding GST

Unit = cum
Taking output = 102.5 cum (225 t)
a) Labour
Mate day -
Mazdoor (Unskilled) day 10.00 560.00 5600.00
Mazdoor (Skilled) day 3.52 560.00 1971.20
Add Agency Allowance 0.000% 0.00
b) Machinery
Batch mix HMP 40-60 THP @ 40 t per hour actual output hour 6.00 23965.00 143790.00

Hydraulic broom @ 1250 sqm per hour hour 1.10 455.00 500.50
Air compressor 210 cfm hour 1.10 633.00 696.30
Paver finisher hour 6.00 3891.00 23346.00
Generator 125 KVA hour 6.00 1836.00 11016.00
Front end loader 1 cum bucket capacity hour 6.00 2023.00 12138.00
Tipper 5.5 cum, 10 t / 5-6 t capacity hour 6.21 1242.70 7717.17
Three wheel 80-100 kN static roller for initial break down hour 12.00 1743.60 20923.20
rolling, final and finishing rolling
Vibratory roller 80-100 kN for intermediate rolling hour 6.00 3499.60 20997.60
c) Material
(i) Bitumen @ 3.3 per cent of mix t 7.43 33210.00 246584.25
(Weight of mix = 102.5 x 2.2 = 225 t)
(ii) Aggregate
Total weight of mix = 225 t
Weight of bitumen = 7.425 t
Weight of aggregate = 225 – 7.425 = 217.575 t
Taking density of aggregate = 1.5 t/cum
Volume of aggregate = 145.05 cum
Grading (19 mm nominal size) :
25 -10 mm - 40 per cent cum 58.02 1386.53 80446.18
10– 5 mm - 40 per cent cum 58.02 1006.53 58398.58
5 mm and below - 20 per cent cum 29.01 694.65 20151.80
Rate per 102.50 Cum 654276.78
Rate per 1 Cum 6383.19
e) Add Overhead charges and contractors profit 13.615% 869.07
7252.26
Add S&C Charges
Metal cum 1.415 0.00 0.00
Rate per 1 cum 7252.26
21 RBR- Prime Coat (Low Porosity)
BASC- Providing and applying primer coat with bitumen emulsion (SS-1) on prepared
1 surface of granular base including cleaning of road surface and spraying primer
at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical
Specification Clause 502 MORD (for use on Wet mix macadam &
WBM) ,including overhead charges & Contractors profit but excluding GST.

Unit = 1 sqm
Taking output = 1750 Sqm
Sl.
Description of Item Unit Qty Rate Amount
No.
a) Labour
Mate day -
Mazdoor (Unskilled) day 1.04 560.00 582.40
Add Agency Allowance 0.000% 0.00
b) Machinery
Hydraulic broom @ 1250 sqm per hour hour 1.40 455.00 637.00
Air compressor 210 cfm hour 1.40 633.00 886.20
Bitumen emulsion pressure distributor @ 1750 sqm/hour hour 1.00 1073.00 1073.00
Water tanker 6 kl capacity 1 trip per hour hour 0.50 822.00 411.00
c) Material
Bitumen emulsion (SS-1) @ 0.85 kg per sqm MT 1.48 26230.00 38820.40
Water Kl 3.00 0.00 0.00
Cost for 1750 sqm (a+b+c) 42410.00
Basic rate per cum 24.23
d) Add Overhead charges and contractors profit 13.615% 3.30
Rate per Sqm including conveyance 27.53
22 RBR- Prime Coat (Low Porosity)
BASC- Providing and applying Primer Coat with Bitchem Emulsion (SS-1) on prepared
1 surface of granular base including cleaning of road surface and spraying primer
at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical
Specification Clause 502
Unit = 1 sqm
Taking output = 1750 Sqm
a) Labour
Mate day -
Mazdoor (Unskilled) day 1.04 560.00 582.40
Add Agency Allowance 0.000% 0.00
b) Machinery
Hydraulic broom @ 1250 sqm per hour hour 1.40 455.00 637.00
Air compressor 210 cfm hour 1.40 633.00 886.20
Bitumen emulsion pressure distributor @ 1750 sqm/hour hour 1.00 1073.00 1073.00

Water tanker 6 kl capacity 1 trip per hour hour 0.50 822.00 411.00
c) Material
Bitchem Bitumen Emulsion (SS-1) @ 0.85kg per sqm MT 1.48 26230.00 38820.40
Water Kl 3.00 0.00 0.00
Cost for 1750 sqm (a+b+c) 42410.00
Basic rate per cum 24.23
d) Add Overhead charges and contractors profit 13.615% 3.30
Rate per Sqm including conveyance 27.53
23 RBR- Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion
BASC- distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular
2 surfaces treated with primer / (or dry and hungry bituminous surface) &
cleaned with Hydraulic broom as per Technical Specification Clause 503
MORD,including overhead charges & Contractors profit but excluding GST.

Unit = 1 sqm
Taking output = 1750 Sqm
a) Labour
Mate day -
Mazdoor (Unskilled) day 1.04 560.00 582.40
Add Agency Allowance 0.000% 0.00
b) Machinery
Hydraulic broom @ 1250 sqm per hour hour 1.40 455.00 637.00
Air compressor 210 cfm hour 1.40 633.00 886.20
Emulsion pressure distributor @1750 sqm per hour hour 1.00 1073.00 1073.00
c) Material
Bitumen emulsion (RS-1) @ 0.275 kg per sqm MT 0.48 33800.00 16224.00
Cost of 1750 sqm = (a+b+c) 19402.60
Sl.
Description of Item Unit Qty Rate Amount
No.
Rate per sqm = (a+b+c)/1750 11.09
d) Add Overhead charges and contractors profit 13.615% 1.51
Rate per Sqm Including conveyance 12.60
24 RBR- Providing and applying Tack Coat with BitChem Emulsion (RS-1) using emulsion
BASC- distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous
2 surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Unit = 1 sqm
Taking output = 1750 Sqm
a) Labour
Mate day -
Mazdoor (Unskilled) day 1.04 560.00 582.40
Add Agency Allowance 0.000% 0.00
b) Machinery
Hydraulic broom @ 1250 sqm per hour hour 1.40 455.00 637.00
Air compressor 210 cfm hour 1.40 633.00 886.20
Emulsion pressure distributor @1750 sqm per hour hour 1.00 1073.00 1073.00
c) Material
BitchemEBitumen Emulsion (RS-1) @ 0.225 kg per sqm MT 0.48 33800.00 16224.00
Cost of 1750 sqm = (a+b+c) 19402.60
Rate per sqm = (a+b+c)/1750 11.09
d) Add Overhead charges and contractors profit 13.615% 1.51
Rate per Sqm Including conveyance 12.60
25 RBR- 20mm thick Open-Graded Premix Carpet using Bituminous
BASC- (penetration grade/modified bitumen) Binder
14 Providing, laying and rolling of open-graded premix carpet of 20 mm thickness
composed of 13.2 mm to 5.6 mm aggregates either using penetration grade
bitumen 60/70 grade at the rate of 14.6 kg/10 sqm to required line, grade and
level to serve as wearing course on a previously prepared base, including
mixing in a Hot Mix plant of 40TPH, laying and rolling with a three wheel 0-100
kN static roller capacity, finished to required level and grades to be followed by
seal coat of either Type A or Type B or Type C including cost and conveyance of
all materials from approved sources, labour charges and hire and operational
charges of power road roller and all other machinery, tools and plants, providing
barricading for diversion of traffic, erecting red flags other incidental and
operational charges etc., complete for finished item of work as per clause 508
MORD.including overhead charges & Contractors profit but excluding GST &
Seignorage charges.

By Mechanical Means
Bitumen (S-65)
Unit = sqm
Taking output = 4000 sqm (80 cum)
a) Labour
Mate day -
Mazdoor (Unskilled) day 10.00 560.00 5600.00
Mazdoor (Skilled) day 3.52 560.00 1971.20
Add Agency Allowance 0.000% 0.00
b) Machinery
HMP 30/40 t per hour hour 6.00 23965.00 143790.00
Electric generator set 125 KVA hour 6.00 1836.00 11016.00
Front end loader 1 cum bucket capacity hour 6.00 2023.00 12138.00
Tipper 5.5 cum - 10 t capacity hour 3.64 1242.70 4523.43
Paver finisher hour 6.00 3891.00 23346.00
Three wheel 80-100 kN static roller hour 16.00 1743.60 27897.60
c) Material
Bitumen (S-65) @ 14.60 kg per 10 sqm MT 5.84 33210.00 193946.40
Sl.
Description of Item Unit Qty Rate Amount
No.
Crushed stone chipping, 13.2 mm to 5.6 mm @ 0.27 cum cum 108.00 1089.23 117637.20
per 10 sqm (average of 12-14 mm,9.5-11.2mm & 5-7 mm
metal)

Basic rate of OGPC for 4000 Sqm 541865.83

d) Basic rate of OGPC per Sqm 135.47
e) Add Overhead charges and contractors profit 13.615% 18.44
153.91
Add S&C Charges
Metal cum 0.027 0.00 0.00
Rate per Sqm including conveyance 153.91
26 RBR- Providing and laying bituminous liquid seal coat (Type A) comprising of a layer of
BASC- bitumuneous binder followed by a cover of stone chipping of grading as defined in table
17 500.16 of MOST at of Crushed stone chipping of 6.7 mm size 100% passing through
11.2mm seive and retained on 2.36 mm sieve applied @ 0.09 cum per 10 sqm chips to
be laid simultaneously along with the bitumunous course using 9.80 kgs of bitumen
60/70 grade for 10 sqm and rolling with power roller including of required line, level,
grade to serve as wearing course on previously prepared surface and finishing to rquired
level and grades including cost and conveyance of all materials from approved sources
and stacking at site to departmental gauge for premeasurements, seigniorage, labour
charges and hire and operational charges of power road roller 8 to 10 tonnes capacity
and all other machinery, tools and plants, providing barricading for diversion of traffic,
erecting red flags other incidental and operational charges etc., complete for finished
item of work as per technical specification clause 510 of MORD.including all over heads ,
and Contractors profit and seignorage charges but excluding GST & seignorge charges.

B By Mechanical Means
(II) Bitumen (S-65)
Unit = sqm
Taking output = 7500 sqm (67.5 cum)
a) Labour
Mate day -
Mazdoor (Unskilled) day 6.24 560.00 3494.40
Add Agency Allowance 0.000% 0.00
b) Machinery
Hydraulic self propelled chips spreader hour 6.00 3264.00 19584.00
Tipper 5.5 cum capacity hour 6.00 1242.70 7456.20
Front end loader 1 cum bucket capacity hour 6.00 2023.00 12138.00
Bitumen pressure distributor hour 6.00 1907.00 11442.00
Three wheel 80-100 kN static roller hour 15.00 1743.60 26154.00
c) Material
Bitumen (S-65) @ 9.80 kg per 10 sqm MT 7.35 33210.00 244093.50
Crushed stone chipping of 6.7 mm size 100 per cent cum 67.50 892.15 60220.13
passing 11.2 mm sieve and retained on 2.36 mm sieve
applied @ 0.09 cum per 10 sqm
Basic rate of OGPC for 7500 Sqm 384582.23
d) Basic rate of OGPC per Sqm 51.28
e) Add Overhead charges and contractors profit 13.615% 6.98
58.26
Add S&C Charges
Metal cum 0.009 0.00 0.00
Rate per Sqm including conveyance 58.26
27 RBR- Seal Coat - Case II: Type B (510-MoRD) - By mechanical means
BASC- Providing and laying seal coat sealing the voids in a bituminous surface laid to
17 the specified levels, grade and cross fall using Type B, as per technical
specification clause 510 MoRD (using three wheel 80-100 kN static roller)
including overhead charges but excluding GST & seignorage charges

B By Mechanical Means
(II) Bitumen (S-65)
Sl.
Description of Item Unit Qty Rate Amount
No.
Unit = sqm
Taking output = 5000 sqm (30.00 cum)
a) Labour
Mate day -
Mazdoor (Unskilled) day 4.16 560.00 2329.60
Add Agency Allowance 0.000% 0.00
b) Machinery
HMP of 30/40 t per hour hour 2.00 23965.00 47930.00
Electric generator set 125 KVA hour 2.00 1836.00 3672.00
Front end loader 1 cum bucket capacity hour 2.00 2023.00 4046.00
Tipper 5.5 cum - 10 t capacity hour 1.36 1242.70 1690.07
Paver finisher hour 2.00 3891.00 7782.00
Three wheel 80-100 kN static roller hour 10.00 1743.60 17436.00
c) Material
Bitumen (S-65) @ 6.80 kg per 10 sqm MT 3.40 33210.00 112914.00
Crushed sand defined as passing 2.36 mm sieve and cum 30.00 497.30 14919.00
retained on 180 micron sieve applied @ 0.06 cum /10 sqm

Basic rate of OGPC for 5000 Sqm 212718.67

d) Basic rate of OGPC per Sqm 42.54
e) Add Overhead charges and contractors profit 13.615% 5.79
48.33
Add S&C Charges
Sand cum 0.006 0.00 0.00
Rate per Sqm including conveyance 48.33
28 RBR- Providing and laying bituminous premixed seal coat (Type C) comprising of stone
BASC- chipping of grading as defined in table 500.16 of MoST with crushed stone chips of
17 6.70mm size 100% passing through 9.50mm seive and retained on 2.36mm sieve
applied @ 0.09 cum per 10 Sqm, chips to be premixed by mechanical means with the
bituminous binder using 6.50 Kgs of bitumen 60/70 grade for 10 Sqmand rolling with
power roller including of required line, level, grade to serve as wearing course on
previously prepared surface and finishing to required level and grades including cost and
conveyance of all materials from approved sources and stacking at site to departmental
guage for premeasurements, labour charges and hire and operational charges of power
road roller 8 to 10 tonnes capacity and all other machinery, tools and plants, providing
barricading for diversion of traffic, erecting red flags other incidental and operational
charges etc., complete for finished item of work as per technical specification clause 510
of MoRD including contractors profit & overhead charges, GST and seignorage charges
etc complete

B By Mechanical Means
(III) Bitumen (S-65)
Unit = sqm
Taking output = 7500 sqm (67.5 cum)
a) Labour
Mate day -
Mazdoor (Unskilled) day 5.20 560.00 2912.00
Add Agency Allowance 0.000% 0.00
b) Machinery
Hydraulic self propelled chips spreader hour 6.00 3264.00 19584.00
Tipper 5.5 cum capacity hour 6.00 1242.70 7456.20
Front end loader 1 cum bucket capacity hour 6.00 2023.00 12138.00
Bitumen pressure distributor hour 6.00 1907.00 11442.00
Three wheel 80-100 kN static roller hour 15.00 1743.60 26154.00
c) Material
Bitumen (S-65) @ 6.50 kg per 10 sqm MT 4.88 33210.00 162064.80
Crushed stone chipping of 6.7 mm size 100 per cent cum 67.50 892.15 60220.13
passing 11.2 mm sieve and retained on 2.36 mm sieve
applied @ 0.09 cum per 10 sqm
Basic rate of OGPC for 7500 Sqm 301971.13
d) Basic rate of OGPC per Sqm 40.26
Sl.
Description of Item Unit Qty Rate Amount
No.
e) Add Overhead charges and contractors profit 13.615% 5.48
45.74
Add S&C Charges
Metal cum 0.009 0.00 0.00
Rate per Sqm including conveyance 45.74
29 RBR- Semi-Dense Bituminous Concrete
BASC- Providing and laying semi dense bituminous concrete with 40-60 TPH batch
8 type HMP producing an average output of 37.5 tonnes per hour using crushed
aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5
per cent of mix and filler, transporting the hot mix to work site, laying with a
hydrostatic paver finisher with sensor control to the required grade, level and
alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve
the desired compaction as per MoRTH specification clause No. 508 complete in
all respects

Unit = cum
Taking output = 195 cum (450 tonnes)
a) a) Labour
Mate day
Mazdoor (Unskilled) working with HMP, mechanical broom, day 12.00 560.00 6720.00
paver, roller, asphalt cutter and assistance for setting out
lines, levels and layout of construction
Skilled mazdoor for checking line & levels day 5.84 560.00 3270.40
Add Agency Allowance 0.000% 0.00
b) Machinery
HMP 40-60 TPH hour 11.00 23965.00 263615.00
Paver finisher hydrostatic with sensor control @ 75 cum hour 6.00 3891.00 23346.00
per hour
Generator 250 KVA hour 6.00 2572.00 15432.00
Front end loader 1 cum bucket capacity hour 6.00 2023.00 12138.00
Smooth wheeled roller 8-10 tonnes for initial break rolling. hour 3.90 1743.60 6800.04
(6 x 0.65)
Vibratory roller 8 tonnes for intermediate rolling. hour 3.90 3499.60 13648.44
Finish rolling with 6-8 tonnes smooth wheeled tandem hour 3.90 2208.00 8611.20
roller
c) Material
Grading II: 10 mm (Nominal Size)
Bitumen 60/70 Grade @ 4.5 per cent of weight of mix t 22.50 33210.00 747225.00
weight of mix = 450 tonne
Aggregate
Total weight of mix = 450 tonnes
Weight of bitumen = 22.50 tonnes
Weight of aggregate = 450 -22.50 = 427.50 tonnes
Taking density of aggregate = 1.5 ton/cum
Volume of aggregate = 285.00 cum
9.50-11.20mm HBG M/c Chips cum 81.23 1120.90 91045.10
5-7mm HBG M/c Chips cum 81.23 892.15 72464.88
2.36-5mm HBG M/c Chips cum 58.43 694.65 40584.93
2.36mm and below cum 58.43 485.90 28388.71
Filler @ 2 per cent of weight of aggregates (Stone Dust) cum 5.70 485.90 2769.63

d) Rate per 195 cum 1336059.33

Rate per 1 cum 6851.59
d) Add Overhead charges and contractors profit 13.615% 932.84
7784.43
Add S&C Charges
Metal cum 1.462 0.00 0.00
Rate per Sqm including conveyance 7784.43
Sl.
Description of Item Unit Qty Rate Amount
No.
30 Providing, laying of close graded premix (Mixed seal surfacing) material of 25
mm thickness by hot mix plant using hard blasted granite crushed aggregates
of 13.20 mm to 0.09mm 9Type B) as per table 500.15 of specification 509 of
MORD, premixed with bituminous binder 60/70 grade (-65, VG-30 Bulk) @
23.75 Kg per 10 Sqm area, including cost of all materials ( excluding
seigniorage) and transporting the hot mix to work site, laying with mechanical
paver finisher to the required grade, level and alignment, rolling with somooth
wheeled roller 8 to 10 tonnes as per MORD specification 509 complete for
finished item of work in all respects as directed by Enginer-in-charge but
excluding seinorage charges and GST.

By Mechanical Means
Taking out put = 8200 Sqm (205Cum) (450 tonnes)
a) Labour
Mate day 0 0.00
Mazdoor working withHMP, Mechanical brrom, paver, day 14.84 560.00 8310.40
roller, asphalt cutter and assistance for setting oulines,
levels and layout of construction.
Skilled Mazddor for checking line and levesl day 5.00 560.00 2800.00
Add Agency Allowance 0.000% 0.00
b) Machinery
HMP 40 -60 TPH hour 12.00 23965.00 287580.00
Electric generator set 250 KVA hour 6.00 2572.00 15432.00
Front end loader 1cum bucket capacity hour 6.00 2023.00 12138.00
Paver finisher @ 100 TPH hour 4.80 3891.00 18676.80
Three wheel 80-100 kN static roller hour 6.00 1743.60 10461.60
c) Materials
Cost of materials
Crushed stone chips of 13.2mm to 5.6mm size @ 0.34 cum 276.75 889.65 246210.64
cum per 10 sqm. ( 66% of 11.20 mm HBG chips and 34 %
of 5 to 7 mm HBG chips
Bitumen 60/70 grade @ 23.75 Kg per 10 sqm MT 19.48 33210.00 646930.80
Basic rate of OGPC for 8200 Sqm 1248540.24
Basic rate of OGPC per Sqm 152.26
e) Add Overhead charges and contractors profit 13.615% 20.73
172.99
Add S&C Charges
Metal cum 0.034 0.00 0.00
Rate per sqm 172.99
31 Providing, laying and rolling of close graded premix surfacing (Mixed seal
surfacing) material of 25 mm thickness composed of 11.20mm to 0.09mm
(Type B) aggregatres asp er Table 500.15 of MoRD using CRRI-BitChem tailor
made cold max binder to required line, grade and lavel to serve as wearing
course on a previously prepared base, incluidng mixing in a suitable plant by
manual means, laying and rolling with a three wheel 8-10kN static roller and
finishing to required level and grades as per technical specification clause 509
MoRD, infor finished item of work in all respects as directed by Enginer-in-
charge including contractors profit & overhead charges, GST and seignorage
charges etc complete but excluding seinorage charges and GST

By Manual Means (Type B) 20mm thick

Unit - Sqm
Taking out put = 500 Sqm
a) Labour
Mate day 0 0.00
Mazdoor (Unskilled) day 21.00 560.00 11760.00
Mazdoor (skilled) day 8.40 560.00 4704.00
Add Agency Allowance 0.000% 0.00
b) Machinery
Sl.
Description of Item Unit Qty Rate Amount
No.
Mixall 6-10 Capacity hour 6.00 692.70 4156.20
Oil fired bitumen boiler 1000 Ltr capacity fitted with spray hour 6.00 261.00 1566.00
set
Three wheel 80-100 kN static roller hour 6.00 1743.60 10461.60
c) Materials
Cost of materials
CRRI-BitChem tailor made coldmix binder @ 30 Kg per 10 MT 1.50 33210.00 49815.00
Sqm
Crushed stone chips of 11.20mm to 0.09mm size @ 0.27 cum 13.50 889.65 12010.28
cum per 10 sqm.
Basic rate for 500 Sqm 94473.08
Basic rate per Sqm 20mm thick 188.95
Basic rate per Sqm 25mm thick 236.19
e) Add Overhead charges and contractors profit 13.615% 32.16
268.35
Add S&C Charges
Metal cum 0.034 0.00 0.00
Rate per sqm 268.35
32 RBR- Cement Concrete Pavement
CCPV- Construction of un-reinforced, dowel jointed at expansion and construction joint only,
5 plain cement concrete pavement, thickness as per design, over a prepared sub base,
with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), coarse and
fine aggregates conforming to IS : 383, mixed in a concrete mixer of not less than 0.2
cum capacity and appropriate weigh batcher using approved mix design, laid in
approved fixed side formwork (laying and fixing of 125 micron thick polythene film,
wedges, including levelling the formwork as per drawing), spreading the concrete with
sholvels, rakes, compacted using needle, screed and plate vibrators and finished in
continuous operation including provision of contraction and expansion and construction
joints, applying debonding strips, primer, sealant, admixtures as approved, curing of
concrete slabs for 14- days, curing compound (where specified) and water finishing to
lines and grade as per drawing and Technical Specification Clause 1501 MORD including
overhead charges & Contractors profit but excluding GST and seigniorage charges

Unit = cum
Taking output = 75cum (172.50 t)
(100x3.75 x 0.200)
a) Labour
Mason (1st class) day 5.00 670.00 3350.00
Mason (2nd class) day 5.00 605.00 3025.00
Mazdoor (unskilled) day 150.00 560.00 84000.00
Mazdoor(skilled) day 6.00 607.00 3642.00
Surveyor day 2.00 1040.00 2080.00
Mazdoor (semi-skilled) day 6.00 560.00 3360.00
Add Agency Allowance 0.000% 0.00
b) Machinery
Concrete mixer 0.28/0.40 cum capacity ( 6 mixers) with Hour 36.00 692.70 24937.20
weight batcher and suitable capacity calibrated water tank

Needle vibrator Hour 9.00 274.40 2469.60

Screed vibrator Hour 9.00 70.00 630.00
Plate vibrator Hour 9.00 70.00 630.00
Water tanker 6 Kl. Capacity Hour 5.00 822.00 4110.00
Air compressor ( 1hr initial + 1 hr final) Hour 2.00 633.00 1266.00
Concrete Cutting Machine Hour 4.00 220.00 880.00
c) Material
(I) Crushed stone coarse aggregates, grading will be as per
clause 1501.2.4.1 (Table 1500.1) of specifications @ 0.90
Cum/cum of concrete
20mm Cum 44.55 1658.40 73881.72
12mm Cum 22.95 1342.15 30802.34
Sl.
Description of Item Unit Qty Rate Amount
No.
(ii) Sand as per IS:383 and conforming to clause 1500.2.4.2. cum 33.75 642.30 21677.63
@ 0.45 cum of concrete
(iii) Cement @ 350 Kg/cum of concrete t 26.250 4220.00 110775.00
(iv) Polythene sheet 125 micron sqm 412.50 15.25 6290.63
Bitumen primer @ 200ml. Per joint for 23 joints t 0.005 33210.00 166.05
Bitumenous sealant 800 ml. Per joint for 23 joints MAT- Litre 18.40 70.00 1288.00
00275
Plasticizer 0.5 per cent by weight of cement MAT-05375 Litre 122.00 83.00 10126.00
(4x3.75x0.200 = 3 sqm) 389387.17
(d) Form work @ 3% on (a+b+c) 11681.62
Cost for 75 cum = a+b+c+d 401068.79
Rate per Cum = (a+b+c+d+e)/75 5347.58
(e) Add Overhead charges and contractors profit 13.615% 728.07
6075.65
Add S&C Charges
Metal cum 0.900 0.00 0.00
Sand cum 0.45 0.00 0.00
Rate per Cum excluding GST 6075.65
33 RBR- Selected Earth Shoulders (Table 407 & 305,305.4.4)
SBBS- Construction of Sub Base / Shoulders by providing Selected earth having MDD
2 not less than 1.85g/cc with LL & PL not exceeding 40% and 20% respectively
and and spreading in uniform layers with tractor grader on prepared surface
and copacted to OMC with Vibratory roller of 80 to 100kN capacity to achieve
the desired density, complete as per IRC technical specification clause 407
MoRD,305&305.4.4 MoRT&H including all over heads , and Contractors profit
but Excluding GST and seigniorage charges
Taking out put = 300 cum
a) Labour
Mazdoor (Skilled) day 2.40 560.00 1344.00
Mazdoor (Un-Skilled) day 8.00 560.00 4480.00
Add Agency Allowance 0.000% 0.00
b) Machinery
Vibratory Roller 80-100 kN @ 100 Cum per Hr hour 6.00 3499.60 20997.60
Water tanker 6kl capacity hour 5.00 822.00 4110.00
Tractor with grader @ 25 cum per hour hour 12.00 543.00 6516.00
Tractor with rotavator@ 25 cum per hour hour 12.00 543.00 6516.00
c) Material
Well graded granular sub-base material as per table 400.2

Cost of materials
Selected Earth cum 360.00 172.30 62028.00
Water Kl 18.00 99.00 1782.00
Basic rate of Selected earth shoulders for 300 cum 107773.60
d) Basic rate of Selected earth shoulders cum 359.25
e) Add Overhead charges and contractors profit 13.615% 48.91
408.16
Add S&C Charges
S Earth cum 1.200 0.00 0.00
Rate per cum 408.16
34 RBR- Filling in foundation trenches and approchs with Stone Dust as per drawing and
FNDN technical specification Clause 305.3.9 MORD & 304 MORTH ,including overhead
-2 charges & Contractors profit but excluding GST.
1) Stone dust filling
Taking output - 1 Cum
unit = cum
a) Labour
Mate day -
Mazdoor (Unskilled) day 0.31 560.00 173.60
Add Agency Allowance 0.000% 0.00
Sl.
Description of Item Unit Qty Rate Amount
No.
b) Material
Stone Dust Cum 1.00 485.90 485.90
Basic rate per 1 cum 659.50
Basic rate per cum 659.50
c) Add Overhead charges and contractors profit 13.615% 89.79
749.29
Add S&C Charges cum 1.00 0.00 0.00
Rate per cum including conveyance 749.29
35 RBR- Filling in foundation trenches and approchs with Selected earth as per drawing
FNDN and technical specification Clause 305.3.9 MORD & 304 MORTH ,including
-2 overhead charges & Contractors profit but excluding GST.
1) Selected earth filling
Taking output - 1 Cum
unit = cum
a) Labour
Mate day -
Mazdoor (Unskilled) day 0.31 560.00 173.60
Add Agency Allowance 0.000% 0.00
b) Material
Selected earth Cum 1.00 172.30 172.30
Basic rate per 1 cum 345.90
Basic rate per cum 57.65
c) Add Overhead charges and contractors profit 13.615% 7.85
65.50
Add S&C Charges cum 1.00 0.00 0.00
Rate per cum including conveyance 65.50
36 RBR- ExcaGSTion for Structures
FNDN Earthwork in excacation for structures as per drawing and technical
-1 specifications Clause 305.1 including setting out, construction of shoring and
bracing, removal of stumps and other deleterious material and disposal upto a
lead of 50 m, dressing of sides and bottom and backfilling in trenches with
excaGSTed suitable material as per Technical Specification 305 MORD / 304
MORTH ,including overhead charges & Contractors profit but excluding GST.

Note : Classifications of Earth Work Specification

are as per 302.2.1(a) of MORD and 301.2.1 of
MORT&H
Oridinary Soil
Manual Means
i) Upto 3m depth
Unit = Cum
Taking out put = 10 Cum
a) Labour
Mate day -
Mazdoor (Unskilled) day 3.64 560.00 2038.40
Add Agency Allowance 0.000% 0.00
Rate per 10 Cum 2038.40
b) Add Overhead charges and contractors profit 13.615% 277.53
Cost for 10 cum = a+b+c+d 2315.93
231.59
Add S&C Charges cum 1.00 0.00 0.00
Rate per 1 cum 231.59
37 RBR- Filling in foundation trenches and approchs with sand as per drawing and
FNDN technical specification Clause 305.3.9 MORD & 304 MORTH ,including overhead
-2 charges & Contractors profit but excluding GST.

1) Sand filling
Taking output - 1 Cum
unit = cum
a) Labour
Sl.
Description of Item Unit Qty Rate Amount
No.
Mate day -
Mazdoor (Unskilled) day 0.31 560.00 173.60
Add Agency Allowance 0.000% 0.00
b) Material
Sand Cum 1.00 497.30 497.30
Basic rate per 1 cum 670.90
Basic rate per cum 670.90
c) Add Overhead charges and contractors profit 13.615% 91.34
762.24
Add S&C Charges cum 1.00 0.00 0.00
Rate per cum including conveyance 762.24
38 RBR- Providing concrete for plain concrete M 10 grade in open foundations using 40
FNDN mm nominal size Graded hard stone aggregate, mechanically mixed, placed in
-4 foundation and compacted by vibration including curing for 14 days complete as
per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD
and 1500, 1700 & 2100 MORTH ,including overhead charges & Contractors
profit but excluding GST.

I. P.C.C grade M 10
(i) Nominal mix 1:3:6
unit = cum
a) Material
Cement t 0.220 4220.00 928.40
Coarse sand cum 0.450 642.30 289.04
40 mm aggregate cum 0.900 1035.90 932.31
Water kl 0.000 99.00 0.00
b) Labour
Mate day -
Mason (1st Class) day 0.10 670.00 67.00
Mazdoor (Unskilled) day 1.39 560.00 778.40
Add Agency Allowance 0.000% 0.00
c) Machinery
Mechanical concrete mixer 0.4/0.28 cum capacity fitted hour 0.40 692.70 277.08
with water measuring device and preferably also with load
cell.
Water tanker 6 kl capacity hour 0.13 822.00 106.86
Basic Rate 3379.09
d) Formwork @ 4 % on cost of material, labour and machinery (a+b+c) 135.16
3514.25
e) Add Overhead charges and contractors profit 13.615% 478.47
3992.72
Add S&C Charges
Metal cum 0.90 0.00 0.00
Sand cum 0.45 0.00 0.00
Rate per cum incluidng conveyance 3992.72
39 RBR- Plain cement concrete M 15 grade using 40,20 & 10mm metal mechanically
SBST- mixed in substructure complete as per drawings and technical specification
5 Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200
MORTH ,including overhead charges & Contractors profit but excluding GST.

For height upto 5 m

Unit = cum
P.C.C grade M 15
Nominal mix (1:2.5:5) using CC Mixer (MORD)
unit = cum
Material
Cement t 0.275 4220.00 1160.50
Coarse sand cum 0.480 642.30 308.30
40 mm aggregate cum 0.480 1035.90 497.23
Sl.
Description of Item Unit Qty Rate Amount
No.
20 mm aggregate cum 0.240 1658.40 398.02
10 mm aggregate cum 0.080 1144.65 91.57
Labour
Mate day -
Mason (1st Class) day 0.10 670.00 67.00
Mazdoor (Unskilled) day 1.39 560.00 778.40
Add Agency Allowance 0.000% 0.00
Machinery
Concrete mixer 0.4/0.28 cum capacity hour 0.40 692.70 277.08
Basic Rate 3578.10
(d) Formwork @ 10% on cost of material, labour and machinery (a+b+c) 357.81
3935.91
Add Overhead charges and contractors profit 13.615% 535.87
4471.78
Add S&C Charges
Metal cum 0.80 0.00 0.00
Sand cum 0.48 0.00 0.00
Rate per cum incluidng conveyance 4471.78
40 Providing and Laying Reinforced Cement Concrete Pipe NP3 as per
Providing and laying reinforced cement concrete pipe NP3 for culverts on first
class bedding of granular material including fixing collar with cement mortar
1:2 but excluding excaGSTion, protection works, backfilling, concrete and
masonry works in head wall and parapets. Tech Specification Clause 1106
MORD ,including overhead charges & Contractors profit but excluding GST.
Unit = m
Taking output = 7.5m
(3 pipes of 2.5 m. length each)
(a) 1000mm dia
a) Labour
Mate day -
Mason (1st Class) day 0.250 670.00 167.50
Mazdoor (Unskilled) day 2.090 560.00 1170.40
Laying & fixing of Pipes with colors in position including
lifting, aligning etc.,
Add Agency Allowance 0.000% 0.00
b) Material
Sand at site cum 0.040 497.30 19.89
Cement at site t 0.030 4220.00 126.60
RCC pipe NP3 pipe m 7.500 0.00
RCC pipe NP3 collar at site nos 2.000 0.00
1484.39
c) Add Overhead charges and contractors profit 13.615% 202.10
Cost for 7.5 m = a+b+c+d 1686.49
224.87
Add S&C Charges Cum 0.005 0.00 0.00
Rate per m 224.87
(b) 600mm dia
a) Labour
Mate day -
Mason (1st Class) day 0.150 670.00 100.50
Mazdoor (Unskilled) day 1.250 560.00 700.00
Deduct 20% towards 600mm dia -160.10
Add Agency Allowance 0.000% 0.00
b) Material
Sand at site cum 0.024 497.30 11.94
Cement at site t 0.018 4220.00 75.96
RCC pipe NP3 pipe m 7.500 0.00
RCC pipe NP3 collar at site nos 2.000 0.00
728.30
Sl.
Description of Item Unit Qty Rate Amount
No.
c) Add Overhead charges and contractors profit 13.615% 99.16
Cost for 7.5 m = a+b+c+d 827.46
110.33
Add S&C Charges Cum 0.003 0.00 0.00
Rate per m 110.33
41 RBR- Plain/reinforced cement concrete R.C.C grade M 20 (Design Mix) in
FNDN- substructure using 20 mm & 10 Graded HBG Metal aggregate, including cost,
4 and conveyance of all materials to site and all labour charge mechanically
mixed, placed in foundation and compacted by vibration including curing for 14
days complete as per drawingscomplete as per drawings and technical
specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500,
1700 & 2200 MORTH including contractors profit & Over head charges but
excluding GST and Seignorage charges for Raft

C(ii) R.C.C grade M 20 (Design Mix) (MORTH):

Unit = cum
(i) Height upto 5m
Case I : Using concrete Mixer
a) Material
Cement t 0.347 4220.00 1464.34
Coarse sand cum 0.450 642.30 289.04
20 mm aggregate cum 0.540 1658.40 895.54
10 mm aggregate cum 0.360 1144.65 412.07
b) Labour
Mate day - -
Mason (1st Class) day 0.10 670.00 67.00
Mazdoor (Unskilled) day 1.39 560.00 778.40
Add Add Agency Allowance 0.000% 0.00
c) Machinery
Concrete mixer 0.4/0.28 cum capacity hour 0.40 692.70 277.08
Generator 33 KVA hour 0.40 1356.90 542.76
4726.23
d) Formwork @ 4% on cost of material, labour and machinery (a+b+c) 189.05
4915.28
c) Add Overhead charges and contractors profit 13.615% 669.22
5584.50
Add S&C Charges
Metal Cum 0.90 0.00 0.00
Sand Cum 0.45 0.00 0.00
Rate per cum 5584.50
42 RBR- Providing and laying reinforced cement concrete R.C.C M 25 Grade (Design
SPST- Mix) using 20 & 10 mm HBG Metal in superstructure including cost, and
1 conveyance of all materials to site and all labour charge mechanically mixed as
per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 MORD
including contractors profit & Over head charges but excluding GST and
Seignorage Charges for Bed Blocks

II R.C.C M 25 Grade (Design Mix)

Unit =cum
A Case I : Using Concrete Mixer.
a) Material
Cement t 0.400 4220.00 1688.00
Coarse sand cum 0.450 642.30 289.04
20 mm aggregate cum 0.540 1658.40 895.54
10 mm aggregate cum 0.360 1144.65 412.07
b) Labour
Mate day -
Mason (1st Class) day 0.10 670.00 67.00
Mazdoor (Unskilled) day 1.39 560.00 778.40
Add Add Agency Allowance 0.000% 0.00
c) Machinery
Sl.
Description of Item Unit Qty Rate Amount
No.
Concrete mixer 0.4/0.28 cum capacity hour/cum 0.40 692.70 277.08

Generator 33 KVA hour 0.40 1356.90 542.76

Basic Rate 4949.89
d) Formwork for height upto 5 M @ 20% (a+b+c) 989.98
5939.87
c) Add Overhead charges and contractors profit 13.615% 808.71
6748.58
Add S&C Charges
Metal Cum 0.90 0.00 0.00
Sand Cum 0.45 0.00 0.00
Rate per cum = a+b+c+d+e 6748.58
43 Providing and laying cement concrete wearing course M30 grade desin mix
using 20 & 10 mm HBG Metal including cost, and conveyance of all materials
to site and all labour charge mechanically mixed using 0.075 t/Cum
reinforcement complete as per drawing and technical specifications Clauses 800
and 1206.3 MORD including contractors profit & Over head charges but
excluding cost of Steel & GST

Unit = cum
a) Material
Cement t 0.407 4220.00 1717.54
Coarse sand cum 0.450 642.30 289.04
20 mm aggregate cum 0.540 1658.40 895.54
10 mm aggregate cum 0.360 1144.65 412.07
HYSD bar reinforcement including binding wire (Rate as t 0.075 0.00 0.00
per item 13.2) except OH & CP
b) Labour
Mate day -
Mason (1st Class) day 0.10 670.00 67.00
Mazdoor (Unskilled) day 1.39 560.00 778.40
Mazdoor (Unskilled) for cleaning deck slab concrete day 0.15 560.00 84.00
surface
Add Add Agency Allowance 0.000% 0.00
c) Machinery
Concrete mixer 0.4/0.28 cum capacity hr / cum 0.40 692.70 277.08
Generator 33 KVA hour 0.40 1356.90 542.76
5063.43
d) Formwork @ 3% on cost of material, labour and machinery (a+b+c) 151.90
5215.33
c) Add Overhead charges and contractors profit 13.615% 710.07
5925.40
Add S&C Charges
Metal Cum 0.90 0.00 0.00
Sand Cum 0.45 0.00 0.00
Rate per cum 5925.40
44 Providing and laying reinforced cement concrete R.C.C M 25 Grade (Design
Mix) using 20 & 10 mm HBG Metal in superstructure including cost, and
conveyance of all materials to site and all labour charge mechanically mixed as
per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 MORD
including contractors profit & Over head charges but excluding Steel , GST
for Approach slab
II R.C.C M 25 Grade (Design Mix)
Unit =cum
A Case I : Using Concrete Mixer.
a) Material
Cement t 0.400 4220.00 1688.00
Coarse sand cum 0.450 642.30 289.04
20 mm aggregate cum 0.540 1658.40 895.54
10 mm aggregate cum 0.360 1144.65 412.07
Sl.
Description of Item Unit Qty Rate Amount
No.
b) Labour
Mate day -
Mason (1st Class) day 0.10 670.00 67.00
Mazdoor (Unskilled) day 1.39 560.00 778.40
Add Add Agency Allowance 0.000% 0.00
c) Machinery
Concrete mixer 0.4/0.28 cum capacity hour/cum 0.40 692.70 277.08

Generator 33 KVA hour 0.40 1356.90 542.76

Basic Rate 4949.89
d) Formwork for @ 2% (a+b+c) 99.00
5048.89
c) Add Overhead charges and contractors profit 13.615% 687.41
5736.30
Add S&C Charges
Metal Cum 0.90 0.00 0.00
Sand Cum 0.45 0.00 0.00
Rate per cum = a+b+c+d+e 5736.30
45 RBR Construction of RCC railing of M25 grade in Cast in situ with 20mm nominal size
SPST - aggregate, true to line and grade, tolerance of vertical railing post not to exceed
7 1 in 500, centre to centre spacing between vertical posts not to exceed
2000mm as per drawing and technical specifications clauses 800, 900 and
1208.3 including all over heads , and Contractors profit and seinorage charges
Excluding GST.

Unit - Running Mtr

Taking output = 4 x 12M
Span 48M
a) Material
1) M 25 Grade RCC
NO of vertical posts = (6+1) x 4 = 28 nos
Cross-sectional area of vertical post = 0.25 x 0.275 = 0.069 Sqm
Concrete in vertical posts = 0.069 x 28 x 1.00 = 1.932 cum
Hand rail in 3 tiers = 3 x 48 = 144m
Cross-sectional area = 0.17x0.175 = 0.03 Sqm
Concrete in hand rails = 0.03 x 144 = 4.32 cum
Total concrete = 1.932+4.32 = 6.252 cum
Cost of RCC M25 Cum 6.25 4812.53 30087.94
Add 12% of above cost for formwork 3610.55
33698.49
ii) HYSD Bar reinforcement t 1.36 71226.40 96867.90
Cost of 48m (a) 130566.39
Rate per Mt 2720.13
c) Add Overhead charges and contractors profit 13.615% 370.35
3090.48
Add S&C Charges
Metal Cum 0.12 0.00 0.00
Sand Cum 0.06 0.00 0.00
Rate per Mtr 3090.48
Sub Analysis for RCC M25
a) Material
Cement t 0.400 4220.00 1688.00
Coarse sand cum 0.450 642.30 289.04
20 mm aggregate cum 0.540 1658.40 895.54
10 mm aggregate cum 0.360 1144.65 412.07
b) Labour
Mate day -
Mason (1st Class) day 0.12 670.00 80.40
Mazdoor (Unskilled) day 2.09 560.00 1170.40
Add Add Agency Allowance 0.000% 0.00
Sl.
Description of Item Unit Qty Rate Amount
No.
c) Machinery
Concrete mixer 0.4/0.28 cum capacity hour/cum 0.40 692.70 277.08

Rate per cum = a+b+c+d+e 4812.53

46 RBR- Supplying, fitting, and placing HYSD bar reinforcement in superstructure
SPST- complete as per drawing and technical specifications Clauses 1002, 1010 and
2 1202 MORD / 1600 MORTH, for Bars below 36 mm dia including over laps and
wastage, where they are not welded ,including overhead charges & Contractors
profit and GST

Unit= Tonne
a) Labour
Mate day - - -
Blackmith day 3.00 630.00 1890.00
Mazdoor (Un-skilled) day 8.44 560.00 4726.40
Add Add Agency Allowance 0.000% 0.00
b) Materials
HYSD bars including 5% over laps and wastage MT 1.05 61000.00 64050.00
Binding wire Kgs 8.00 70.00 560.00
Final Rate per 1 MT 71226.40
c) Add Overhead charges and contractors profit 13.615% 9697.47
Rate per 1 MT 80923.87
47 RBR- Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructure
SBST- complete as per drawings and technical specification Clauses 1002, 1005, 1010
6 & 1202 MORD / Sections 1600 & 2200 MORTH for Bars below 36 mm dia
including over laps and wastage, where they are not welded.
Unit= Tonne
a) Labour
Mate day - - -
Blackmith day 2.00 630.00 1260.00
Mazdoor (Un-skilled) day 6.84 560.00 3830.40
Add Add Agency Allowance 0.000% 0.00
b) Materials
HYSD bars including 5% over laps and wastage MT 1.05 61000.00 64050.00
Binding wire Kgs 6.00 70.00 420.00
Final Rate per 1 MT 69560.40
c) Add Overhead charges and contractors profit 13.615% 9470.65
Rate per 1 MT 79031.05
48 RBR- Supplying, fitting and placing HYSD bar reinforcement in foundation complete
FNDN- as per drawings and technical specifications Clauses 1000 and 1202 MORD &
7 1100, 1600 MORTH for Bars below 36 mm dia including over laps and wastage,
where they are not welded.
Unit= Tonne
a) Labour
Mate day - - -
Blackmith day 2.00 630.00 1260.00
Mazdoor (Un-skilled) day 6.40 560.00 3584.00
Add Add Agency Allowance 0.000% 0.00
b) Materials
HYSD bars including 5% over laps and wastage MT 1.05 61000.00 64050.00
Binding wire Kgs 6.00 70.00 420.00
Final Rate per 1 MT 69314.00
c) Add Overhead charges and contractors profit 13.615% 9437.10
Rate per 1 MT 78751.10
49 RBR- Providing concrete for plain/reinforced concrete in open foundations using 40
FNDN- mm nominal size Graded hard stone aggregate, mechanically mixed, placed in
4 foundation and compacted by vibration including curing for 14 days complete as
per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD
and 1500, 1700 & 2100 MORTH.
Sl.
Description of Item Unit Qty Rate Amount
No.
Nominal mix 1:2.5:5 (Hand mixing) (MORD)
Taking output = cum
a) Labour
Mate day - - -
Mason (1st class) day 0.10 630.00 63.00
Mazdoor (Un-skilled) day 2.36 560.00 1321.60
Add Agency Allowance 0.000% 0.00
b) Materials
Cement MT 0.275 4220.00 1160.50
Coarse Sand cum 0.48 642.30 308.30
40 mm aggregate cum 0.54 1035.90 559.39
20 mm aggregate cum 0.27 1658.40 447.77
10 mm aggregate sqm 0.09 1144.65 103.02
Total 3963.58
Formwork @ 4% on cost of (a + b) 0.00
3963.58
Add S&C Charges
Metal Cum 0.800 0.00 0.00
Sand Cum 0.480 0.00 0.00
0.00
Total 3963.58
50 RBR- Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructure
SBST- complete as per drawings and technical specification Clauses 1002, 1005, 1010
6 & 1202 MORD / Sections 1600 & 2200 MORTH for Bars below 36 mm dia
including over laps and wastage, where they are not welded.
Unit= Tonne
a) Labour
Mate day - - -
Blackmith day 2.00 630.00 1260.00
Mazdoor (Un-skilled) day 6.84 560.00 3830.40
Add Agency Allowance 0.000% 0.00
b) Materials
HYSD bars including 5% over laps and wastage MT 1.05 61000.00 64050.00
Binding wire Kgs 6.00 70.00 420.00
Final Rate per 1 MT 69560.40
51 Painting on Concrete/Steel Surfaces with Epoxy
RBR- Painting two coats including prime coat with epoxy paint of approved brand on
TSRA- concrete/steel surfaces after through cleaning of surface to give an even shade
9 as per drawing and Technical Specification Clause 1701 MORD

Unit=sqm
Taking output = 10 sqm
a) Labour
Mate day - - -
Painter (1st class) day 0.60 750.00 450.00
Mazdoor (Un-skilled) day 0.65 560.00 364.00
Add Agency Allowance 0.000% 0.00
b) Materials
Epoxy primer / Red Oxide ltr 0.60 160.00 96.00
Epoxy paint ltr 1.25 362.00 452.50
add @ 1% on cost of material for scaffolding whevever cum 5.49
required
Total (a+b) 1367.99
Rate per 1 Sqm 136.80
52 Painting two coats on New Concrete Surfaces
RBR- Painting two coats including primer coat after filling the surface with synthetic
TSRA- enamel paint in all shades on new, plastered / concrete surfaces as per drawing
6 and Technical Specification Clause 1701MORD.

Unit=sqm
Sl.
Description of Item Unit Qty Rate Amount
No.
Taking output = 40 sqm
a) Labour
Mate day - - -
Painter (1st class) day 3.00 750.00 2250.00
Mazdoor (Un-skilled) day 2.20 560.00 1232.00
Add Agency Allowance 0.000% 0.00
b) Materials
Cement primer as per specification ltr 3.00 173.00 519.00
Paint conforming to requirement ltr 6.00 191.00 1146.00
add 1% on cost of material for scaffolding whenever requir cum 16.65
Total (a+b) 5163.65
Rate per 1 Sqm 129.09
53 RBR- Printing new letter and figures of any shade with synthetic enamel paint black
TSRA- or any other approved colour to give an even shade as per drawings and
1 Technical Specification Clause 1701 MORD / 801 MORTH

English & Roman

Hyphens, commas and the like not to be measured and
paid for. Detail for 100 letter of 160 mm height. i.e. 1600
cm
Unit = Per Cm height per letter
a) Labour
Mate day - - -
Painter (1st class) day 1.25 750.00 937.50
Mazdoor (Un-skilled) day 0.57 560.00 319.20
Add Agency Allowance 0.000% 0.00
b) Materials
Paint ltr 0.50 191.00 95.50
Rate per 1600cm 1352.20
Rate per cm height per letter 0.85
54 Kilometer Stones
RBR- Reinforced cement concrete M15 grade kilometre stone/local stone of standard
TSRA- design as per IRC:8 fixing in position including painting and printing, etc as per
13 drawing and Technical Specification Clause 1703 MORD / 804 MORTH

i 5th KM Stone (precast)

Unit = each
Taking output = 6 Nos.
a) M-15 grade concrete
As per item No. cum 2.35 3963.58 9314.41
b) Steel reinforcement @ 5 Kg per Sqm
As per item No.= Kg 22.08 69.56 1535.88
c) ExcaGSTion in soil for foundation
As per item No. cum 1.68 203.84 342.45
d) Paining two coats on concrete surfaces
As per item No. sqm 9.85 129.09 1271.54
e) Letter on km post (average 30 letters of 10cm
height each)
As per item No. per cm ht 1800.00 0.85 1530.00
per letter

Transportation and fixing

f) Labour
Mate day - - -
Mason (1st Class) day 0.60 750.00 450.00
Mazdoor day 6.26 560.00 3505.60
Add Agency Allowance 0.000% 0.00
g) Machinery
50 HP tactor with trolley hour 6.00 531.00 3186.00
Sl.
Description of Item Unit Qty Rate Amount
No.
Total 21135.88
Add Overhead charges and contractors profit 13.615% 2877.65
Rate per 6 Nos of 5 KM Stones 24013.53
Rate per each 5th KM stone 4002.30
ii Ordiner KM Stone (precast)
Unit = each
Taking output = 14 Nos.
a) M-15 grade concrete
As per item No. cum 3.77 3963.58 14942.70
b) Steel reinforcement @ 5 Kg per Sqm
As per item No.= Kg 26.32 69.56 1830.82
c) ExcaGSTion in soil for foundation
As per item No cum 2.77 203.84 564.64
d) Paining two coats on concrete surfaces
As per item No.23 sqm 11.41 129.09 1472.92
e) Letter on km post (average 12 letters of 10cm
height each)
As per item No.24 per cm ht 1680.00 0.85 1428.00
per letter
Transportation and fixing
f) Labour
Mate day - - -
Mason (1st Class) day 1.00 750.00 750.00
Mazdoor day 7.32 560.00 4099.20
Add Agency Allowance 0.000% 0.00
g) Machinery
50 HP tactor with trolley hour 6.00 531.00 3186.00
Total 28274.28
Add Overhead charges and contractors profit 13.615% 3849.54
Rate per 14 Nos of KM Stones 32123.82
Rate per each Ordinary KM stone 2294.60
55 iii 200m Stone (precast)
Unit = each, Taking output = 33 Nos.
a) M-15 grade concrete
As per item No. cum 1.58 3963.58 6262.46
b) Steel reinforcement @ 5 Kg per Sqm
As per item No.21 Kg 66.00 69.56 4590.96
c) ExcaGSTion in soil for foundation
As per item No. cum 1.39 203.84 283.34
d) Paining two coats on concrete surfaces
As per item No. sqm 6.27 129.09 809.39
e) Letter on km post (average 12 letters of 10cm
height each)
As per item No per cm ht 330.00 0.85 280.50
per letter

Transportation and fixing

f) Labour
Mate day - - -
Mason (1st Class) day 1.50 750.00 1125.00
Mazdoor day 7.34 560.00 4110.40
Add Agency Allowance 0.000% 0.00
g) Machinery
50 HP tactor with trolley hour 6.00 531.00 3186.00
Total 20648.05
Add Overhead charges and contractors profit 13.615% 2811.23
Rate per 33 Nos of HM Stones 23459.28
Rate per each Ordinary HM stone 710.90
Sl.
Description of Item Unit Qty Rate Amount
No.
56 RBR- Providing and fixing of typical informatory sign board as per MORD
TSRA- specifications and drawing. Two MS Plates of 1.6 mm thick, top plate duly
20 welded with MS flat iron 25mm x 5m size on back on edges. The lower plate
will be we welded with MS angle irone frame of 25 mm x 25 mm x 5 mm. The
angle iron frame of the lower most plate and flat iron frame of middle plate will
be welded to 2 nos. 75 mm x 75 mm of 12 SWG sheet tubes posts duly
embedded in cement concrete M-15 grade blocks of 450 mm x 450 mm x 600
mm, 600 mm below ground level. All M.s. will be stove enameled on both sides.
Lettering and printing arrows, border etc., will be pointed with ready mixed
synthetic enamel paint of superior quality in required shade and colour. All
sections of framed posts and steel tube will be painted with primer and two
coats of epoxy paint as per drawing clause 1701 MORD

Unit = Each
Taking out put = one typical board
i ExcaGSTion for foundation cum 0.252 203.84 51.37
ii Cement Concrete M15 grade cum 0.252 3963.58 998.82
iii Painting on MS Steel tubes with primer and two coats of
epoxy paint
2x2.05x0.30=1.23
1x1.10x188= 0.21
As per item no. sqm 1.80 136.80 246.24
iv Printing new letters and figures of any shade with
synthetic enamel paint black or any other approved colour
to give an even shade.
Middle plate words 28x5 = 140 per cm height per letter
Bottom plate border 150x2x5 = 1500 per cm height per
letter
Bottom plate border 60x2x5 = 600 per cm height per
letter
Words 101x2.5 = 252.5
Words 80x3 = 240.00
Total (2732.5 per cm height per letter)
As per item no. 24 per cm ht 2732.50 0.85 2322.63
per letter

a) Labour
Mate day - - -
Mazdoor (Un-skilled) day 0.78 560.00 436.80
Add Agency Allowance 0.000% 0.00
b) Material
2nos. MS tubes 75mmx75mm of 12 SWG sheet 2650 mm kg 63.15 61.00 3852.15
long
1no. MS tubes 47mmx47mm of 12 SWG sheet 1100 mm kg 4.47 61.00 272.67
long
Angle iron 50mmx50mmx5mm for lugs kg 2.12 61.00 129.32
1.6mm thick MS sheet strengthened by 25mmx5mm MS sqm 1.25
flat iron logo and middle plate angle iron
25mmx25mmx5mm on bottom plate painting with stove
enameled paint on both sides as per MORD specification.

(1.25sqmx0.0016m*7850kg/cum) = kg 15.70 61.00 957.70

Add 3% cost of MS tube and angle iron towards the cost 127.62
of fabrication, drilling holes,nuts,bolts, etc.
c) Machinery
Tractor with trolley hour 0.24 531.00 127.44
9522.76
Add Overhead charges and contractors profit 13.615% 1296.52
Cost per one board 10819.28
 Data Sheet for Buildings 2023-24

S No Descitpion of item of Work per Quantiy Rate Amont

RBR-FNDN-1 Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1
including setting out, construction of shoring and bracing, removal of stumps and other deleterious
material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches
with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Mazdoor (Unskilled) day 3.64 560.00 2038.40

Add 0% of MA on Labour 0.00
2038.40
Per 1 Cum 203.84
CP0% 0.00
Grand Total 203.84
Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD &
RBR-FNDN-2 304 MORTH
Sand filling
Unit = 1 cum
a) Labour
Mazdoor (Unskilled) day 0.31 560.00 173.60
b) Material MA 0.00
Sand cum 1.00 497.30 497.30
Per 1 Cum 670.90
Per 1 Cum 670.90
CP0% 0.00
Grand Total 670.90
Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixture. All work
BLD-CSTN-2-5 upto plinth level.
Unit = 1cum
A. MATERIALS:
Cement kg 162.00 4220.00 683.64
Coarse aggregate 40 mm cum 0.90 1035.90 932.31
Fine aggregate (Sand) cum 0.45 642.30 289.03
B. MACHINERY
Concrete Mixer 10 / 7 cft (0.2 / 0.8 hour
cum) capacity 1.00 692.70 692.70
C. LABOUR:
Mason 1st class day 0.10 670.00 67.00
Mazdoor (unskilled) day 1.39 560.00 778.40
Water (including for curing) kl 1.20 99.00 118.80
Grand Total 3561.89
CP0% 0.00
Grand Total 3561.89
Plain Cement concrete (1:5:10) using 40 mm metal with Concrete mixture. All work upto plinth
BLD-CSTN-2-7 level.

15 Unit = 1cum
A. MATERIALS:
Cement kg 129.60 4220.00 546.91
Coarse aggregate 40 mm cum 0.90 1035.90 932.31
Fine aggregate (Sand) cum 0.45 642.30 289.03
B. MACHINERY
Concrete Mixer 10 / 7 cft (0.2 / 0.8 hour 1.00 692.70 692.70
cum) capacity
C. LABOUR:
Mason 1st class day 0.10 670.00 67.00
Mazdoor (unskilled) day 1.39 560.00 778.40
Water (including for curing) kl 1.20 99.00 118.80
Grand Total 3425.16
CP0% 0.00
Grand Total 3425.16

R.C.C. M-20 Nominal Mix

Page 34 of 93
 S No Descitpion of item of Work per Quantiy Rate Amont

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of

IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from
approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand)
coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all
materials including all operational, incidental and labour charges such as machine mixing, laying
BLD-CSTN-2-13
concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished
item of work, but excluding centering, shuttering.

FOUNDATIONS, PLINTH, PEDESTALS (Below Plinth)

A. MATERIALS:
20mm HBG graded metal cum 0.90 1658.40 1492.56
Sand cum 0.45 642.30 289.03
Cement Kgs 330.00 4.22 1392.60
1st Class Mason day 0.133 670.00 89.11
2nd Class Mason day 0.267 605.00 161.54
Mazdoor (Both Men & Women) day 3.600 560.00 2016.00
MA 0% 0.00
B. MACHINERY
Concrete Mixer 10 / 7 cft (0.2 / 0.8 hour
cum) capacity 1.000 692.70 692.70
Water (including for curing) kl 1.20 99.00 118.80
BASIC COST per 1 cum 6252.34
Piles
375 x 3.50 DUR cum 0.760 6252.34 4751.78
cum 6.380 560.00 3572.80
MA 0.00
8324.58
CP0% 0.00
Grand Total 8324.58
Piles
300 x 3.50 DUR cum 0.438 6252.34 2738.52
cum 4.875 560.00 2730.00
MA 0.00
5468.52
CP0% 0.00
Grand Total 5468.52
Piles
250 x 3.50 SUR cum 0.227 6252.34 1419.28
cum 3.188 560.00 1785.28
MA 0.00
3204.56
CP0% 0.00
Grand Total 3204.56
Piles
250 x 2.50 SUR cum 0.178 6252.34 1112.92
cum 2.250 560.00 1260.00
MA 0.00
2372.92
CP0% 0.00
Grand Total 2372.92

Footings
BASIC COST per 1 cum Cum 1.00 6252.34 6252.34
Material Hire Charges 1.00 301.00 301.00
Labour charges 1.00 672.00 672.00
7225.34
CP0% 0.00
Grand Total 7225.34
Pedastals
BASIC COST per 1 cum 1.00 6252.34 6252.34
Material Hire Charges 1.00 343.00 343.00

Page 35 of 93
S No Descitpion of item of Work per Quantiy Rate Amont

Labour charges 1.00 1069.00 1069.00

Vibrating Charges 1.00 274.40 274.40
7938.74
CP0% 0.00
Grand Total 7938.74
Plinth beams
BASIC COST per 1 cum 1.00 6252.34 6252.34
Material Hire Charges 1.00 1453.00 1453.00
Labour charges 1.00 1620.00 1620.00
Vibrating Charges 1.00 274.40 274.40
9599.74
CP0% 0.00
Grand Total 9599.74
COLUMNS, LINTELS, WATER TANKS, RCC WALLS IN BUILDINGS
20mm HBG graded metal cum 0.90 1658.40 1492.56
Sand cum 0.45 642.30 289.03
Cement Kgs 330.00 4.22 1392.60
1st Class Mason day 0.167 670.00 111.89
2nd Class Mason day 0.167 605.00 101.04
Mazdoor (Both Men & Women) day 4.700 560.00 2632.00
B. MACHINERY 0% 0.00
Concrete Mixer 10 / 7 cft (0.2 / 0.8 hour
cum) capacity 1.000 692.70 692.70
Vibrating Charges 1Hour 1.000 274.40 274.40
Water (including for curing) kl 1.20 99.00 118.80
BASIC COST per 1 cum 7105.02

Lintels
BASIC COST per 1 cum 1.00 7105.02 7105.02
Material Hire Charges 1.00 826.00 826.00
Labour charges 1.00 1332.00 1332.00
9263.02
CP0% 0.00
Grand Total 9263.02

Columns
BASIC COST per 1 cum 1.00 7105.02 7105.02
Material Hire Charges 1.00 249.00 249.00
Labour charges 1.00 1871.00 1871.00
9225.02
CP0% 0.00
Grand Total 9225.02
RCC SLABS, BEAMS

20mm HBG graded metal cum 0.90 1658.40 1492.56

Sand cum 0.45 642.30 289.03
Cement Kgs 330.00 4.22 1392.60
1st Class Mason day 0.067 670.00 44.89
2nd Class Mason day 0.133 605.00 80.47
Mazdoor (Both Men & Women) day 2.500 560.00 1400.00
B. MACHINERY 0% 0.00
Concrete Mixer 10 / 7 cft (0.2 / 0.8 hour
cum) capacity 0.267 692.70 184.95
Vibrating Charges 1Hour 0.267 274.40 73.26
Water (including for curing) kl 1.20 99.00 118.80
BASIC COST per 1 cum 5076.57

Beams
BASIC COST per 1 cum 1.00 5076.57 5076.57
Material Hire Charges 1.00 1458.00 1458.00

Page 36 of 93
 S No Descitpion of item of Work per Quantiy Rate Amont

Labour charges 1.00 1569.00 1569.00

8103.57
CP0% 0.00
Grand Total 8103.57

Slabs - Unit 10Sqm 125mm th

BASIC COST per 1 cum cum 1.25 5076.57 6345.71
Material Hire Charges 10.00 165.00 1650.00
Labour charges 10.00 186.00 1860.00
9855.71
CP0% 0.00
Grand Total 9855.71
Sunshades 75 mm at fixed end and 50mm at free end - Unit 1
Sqm
BASIC COST per 1 Cum with out rmt
vibrating 0.0625 5003.30 312.71
Material Hire Charges 1.00 163.00 163.00
Labour charges 1.00 204.00 204.00
679.71
CP0% 0.00
Grand Total 679.71
Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and
technical specifications for Bars below 36 mm dia including over laps and wastage, where they are
not welded

Unit = 1 MT
A) MATERIAL
HYSD/TMT/ MS bars including 5
per cent for overlaps and wastage MT 1.05 61000.00 64050.00
Binding wire Kg 6.00 70.00 420.00
B) LABOUR for cutting, bending,
shifting to site, tying, lap splicing
and placing in position

Blacksmith / Bar bender day 10.00 630.00 6300.00

Mazdoor (Unskilled) day 10.00 560.00 5600.00
MA 0% 0.00
Unit - 1MT 76370.00
CP0% 0.00
Grand Total 76370.00

SUPER STRUCTURE DATAS

BLD-CSTN-3-2 Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms
Unit = 1cum
A. MATERIALS:
Cement kg 48.00 4.22 202.56
Bricks traditional size 23 x 11 x 7 Nos
cms 2nd class 512.00 8369.80 4285.34
Fine aggregate (Sand) cum 0.20 758.30 151.66
B. LABOUR:
Mason 1st class day 0.24 670.00 160.80
Mason 2nd class day 0.56 605.00 338.80
Mazdoor (unskilled) day 1.89 560.00 1058.40
MA 0% 0.00
Grand Total 6197.56
CP0% 0.00
Grand Total 6197.56

BLD-CSTN-3-2 Brick Masonry in CM (1:8) with Bricks traditional size 23 x 11 x 7 cms 2nd Class
Unit = 1cum
A. MATERIALS:
Cement kg 36.00 4.22 151.92

Page 37 of 93
 S No Descitpion of item of Work per Quantiy Rate Amont

Bricks traditional size 23 x 11 x 7 Nos

cms 2nd class 512.00 8369.80 4285.34
Fine aggregate (Sand) cum 0.20 758.30 151.66
B. LABOUR:
Mason 1st class day 0.24 670.00 160.80
Mason 2nd class day 0.56 605.00 338.80
Mazdoor (unskilled) day 1.89 560.00 1058.40
6146.92
ADD Scafolding charges Sqm 4.35 95.40 414.78
MA 0% 0.00
Grand Total 6561.70
CP0% 0.00
Grand Total 6561.70

For FIRST Floor

Ground Floor Rate Cum 1.00 6146.92 6146.92
Add Lift Chargs Cum 0.10 1558.00 155.80
ADD Scafolding charges Sqm 4.35 131.96 573.74
6876.46

Reinforced Brick Masonary walls of 11.5cm in CM(1:6) using FlyAsh/2nd cl bricks having a
crushing strength of not less than 35.00kg/cm2 and using two mild steel bars of 6m dia in every
third layer of brick masory, with free joints of the main block work including cost and seignorage
charges and conveyance of all materials and water from approved sources to work site and all
BLD-CSTN-3-4 operational, incidental, labour charges such as scaffolding mixing mortor constructing masonary lift
charges, curing etc. complete but excluding the cost of steel and its fabrication charges for finished
item of work as per SS 509

32 Ground Floor :
A. MATERIALS:
II Class Bricks cum 512 8369.80 4285.34
C.M.(1:6) cum 0.200 1921.01 384.20
B. LABOUR:
Mason 1st class day 0.600 670.00 402.00
Mason 2nd class day 0.600 605.00 363.00
Mazdoor (unskilled) day 2.750 560.00 1540.00
ADD Scafolding charges Sqm 8.70 95.40 829.57
MA 0% 0.00
Grand Total 7804.11
R.C.C. M-20 Design Mix
Supply and placing of the M 20 Grade Design Mix Concrete corresponding to IS 456 using WEIGH
BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse
aggregate) from approved quarry including cost and conveyance of all materials like cement, fine
aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales &
other taxes on all materials including all operational, incidental and labour charges such as weigh
batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its
BLD-CSTN-2-14 fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per
IS code from standard suppliers approved by the department including pumping, centering,
shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its
fabrication charges for finished item of work.

FOUNDATIONS, PLINTH,
PEDESTALS (Below Plinth)
A. MATERIALS:
20mm HBG graded metal cum 0.48 1658.40 796.03
12mm HBG graded metal cum 0.12 1342.15 161.06
10mm HBG graded metal cum 0.12 1144.65 137.36
6mm HBG graded metal cum 0.08 932.15 74.57
Sand for Concrete cum 0.40 642.30 256.92
Cement Kgs 350.00 4.22 1477.00
1st Class Mason day 0.133 670.00 89.11

Page 38 of 93
S No Descitpion of item of Work per Quantiy Rate Amont

2nd Class Mason day 0.267 605.00 161.54

Mazdoor (Both Men & Women) day 4.600 560.00 2576.00
Add MA 20/0% on labour 0.00
Water (including for curing) kl 1.20 99.00 118.80
B. MACHINERY
Concrete Mixer 10 / 7 cft (0.2 / 0.8 hour
cum) capacity 1.333 692.70 923.37
BASIC COST per 1 cum 6771.75

Footings
BASIC COST per 1 cum Cum 1.00 6771.75 6771.75
Material Hire Charges 1.00 301.00 301.00
Labour charges 1.00 672.00 672.00
7744.75
Pedastals
BASIC COST per 1 cum 1.00 6771.75 6771.75
Material Hire Charges 1.00 343.00 343.00
Labour charges 1.00 1069.00 1069.00
Vibrating Charges 1.00 274.40 274.40
8458.15
Plinth beams
BASIC COST per 1 cum 1.00 6771.75 6771.75
Material Hire Charges 1.00 1453.00 1453.00
Labour charges 1.00 1620.00 1620.00
Vibrating Charges 1.00 274.40 274.40
10119.15
COLUMNS, LINTELS, WATER TANKS, RCC WALLS IN BUILDINGS

20mm HBG graded metal cum 0.48 1658.40 796.03

12mm HBG graded metal cum 0.12 1342.15 161.06
10mm HBG graded metal cum 0.12 1144.65 137.36
6mm HBG graded metal cum 0.08 932.15 74.57
Sand for concrete cum 0.40 642.30 256.92
Cement Kgs 350.00 4.22 1477.00
1st Class Mason day 0.167 670.00 111.89
2nd Class Mason day 0.167 605.00 101.04
Mazdoor (Both Men & Women) day 5.600 560.00 3136.00
Add MA 20/0% on labour 0.00
B. MACHINERY
Concrete Mixer 10 / 7 cft (0.2 / 0.8 hour
cum) capacity 1.333 692.70 923.37
Water (including for curing) kl 1.20 99.00 118.80
BASIC COST per 1 cum 7294.03

Lintels
BASIC COST per 1 cum 1.00 7294.03 7294.03
Material Hire Charges 1.00 826.00 826.00
Labour charges 1.00 1332.00 1332.00
9452.03

Columns
BASIC COST per 1 cum 1.00 7294.03 7294.03
Material Hire Charges 1.00 249.00 249.00
Labour charges 1.00 1871.00 1871.00
Vibrating Charges 1Hour 1.00 274.40 274.40
9688.43
RCC SLABS, BEAMS
ANY GRADE OF MIX
20mm HBG graded metal cum 0.48 1658.40 796.03
12mm HBG graded metal cum 0.12 1342.15 161.06
10mm HBG graded metal cum 0.12 1144.65 137.36

Page 39 of 93
 S No Descitpion of item of Work per Quantiy Rate Amont

6mm HBG graded metal cum 0.08 932.15 74.57

Sand for concrete cum 0.45 642.30 289.03
Cement Kgs 350.00 4.22 1477.00
1st Class Mason day 0.067 670.00 44.89
2nd Class Mason day 0.133 605.00 80.47
Mazdoor (Both Men & Women) day 3.077 560.00 1723.12
Add MA 20/0% on labour 0.00
B. MACHINERY
Concrete Mixer 10 / 7 cft (0.2 / 0.8 hour
cum) capacity 0.308 692.70 213.35
Water (including for curing) kl 1.20 99.00 118.80
BASIC COST per 1 cum 5115.68
Beams
BASIC COST per 1 cum 1.00 5115.68 5115.68
Material Hire Charges 1.00 1458.00 1458.00
Labour charges 1.00 1569.00 1569.00
Vibrating Charges 1Hour 1.00 274.40 274.40
8417.08

Slabs - Unit 10Sqm

BASIC COST per 1 cum cum 1.00 5115.68 5115.68
Material Hire Charges 10.00 165.00 1650.00
Labour charges 10.00 186.00 1860.00
Vibrating Charges 1Hour 1.00 274.40 274.40
8900.08
Sunshades 75 mm at fixed end and 50mm at free end - Unit 1
Sqm
BASIC COST per 1 Cum rmt 0.0625 5115.68 319.73
Material Hire Charges 1.00 163.00 163.00
Labour charges 1.00 204.00 204.00
686.73
CP0% 0.00
Grand Total 686.73
BLD-CSTN-1-8 Cement Mortar (1 : 8)
Unit : 1cum
A. MATERIALS:
Cement kg. 180.00 4220.00 759.60
Sand for Mortor (including 5% cum
wastage) 1.05 758.30 796.22
C. LABOUR:
Man mazdoor for mixing mortar day 0.20 560.00 112.00
MA 0% 0.00
Grand Total 1667.82
CP0% 0.00
Grand Total 1667.82
Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for
manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs.
and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges,
BLD-CSTN-6-18 scaffolding and curing etc., cpomplete with a compresive streangth not lessthan 50 kg/sqm for
walls for Superstructure Walls.

Ground Floor
Unit = 1 cum
A. MATERIALS:
Flyash Cement solid blocks of size day
290 x 225 x 140 mm 110.000 33445.00 3678.95
Cost of Cement Mortar (1:8) cum 0.100 1667.82 166.78
B. LABOUR
Mason 1st class day 0.420 670.00 281.40
Mason 2nd class day 0.920 605.00 556.60
Man Mazdoor day 0.700 560.00 392.00
Woman Mazdoor day 2.100 560.00 1176.00

Page 40 of 93
 S No Descitpion of item of Work per Quantiy Rate Amont

ADD Scafolding charges Sqm 4.35 95.40 414.78

MA 0% 0.00
Total 6666.51
CP0% 0.00
Grand Total 6666.51
BLD-CSTN-1-4 Cement Mortar (1 : 3) (1:3)
Unit : 1cum
A. MATERIALS:
Cement kg. 480.00 4220.00 2025.60
Sand for Mortor (including 5% cum
wastage) 1.05 758.30 796.22
C. LABOUR:
Man mazdoor for mixing mortar day
0.20 560.00 112.00
MA 0% 0.00
Grand Total 2933.82
CP0% 0.00
Grand Total 2933.82

BLD-CSTN-1-6 Cement Mortar (1 : 5)

Unit : 1cum
A. MATERIALS:
Cement kg. 288.00 4220.00 1215.36
Sand for Mortor (including 5% cum
wastage) 1.05 758.30 796.22
C. LABOUR:
Man mazdoor for mixing mortar day 0.20 560.00 112.00
MA 0% 0.00
Grand Total 2123.58
CP0% 0.00
Grand Total 2123.58

BLD-CSTN-6 Plastering with CM (1:3), 12 mm thick for ceiling

Unit = 10 sqm
A. MATERIALS:
Cement Mortar (1:3) cum 0.15 2933.82 440.07
B. LABOUR:
Mason 1st class day 0.45 670.00 301.50
Mason 2nd class day 1.050 605.00 635.25
Mazdoor (unskilled) day 2.80 560.00 1568.00
2944.82
Add Scafolding charges Sqm 10.00 19.51 195.10
MA 0% 0.00
Grand Total 3139.92
CP0% 0.00
Grand Total 3139.92

FOR FIRST FLOOR

Ground Floor Rate Sqm 2944.82
Add Lift Chargs Sqm 0.10 2504.75 250.48
Add Scafolding charges Sqm 10.00 26.61 266.10
3461.40

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 12mm thick with 1kg of
water proof compound per bag of cement laid over roof when it is green including cost of all
materials, seigniorage charges, excluding conveyance charges of materials and including all
operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread
lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Unit = 10 sqm
A. MATERIALS:

Page 41 of 93
 S No Descitpion of item of Work per Quantiy Rate Amont

Cement Mortar (1:3) cum 0.15 2933.82 440.07

Acco Proof Compound kg 1.44 111.00 159.84
B. LABOUR:
Mason 1st class day 0.45 670.00 301.50
Mason 2nd class day 1.050 605.00 635.25
Mazdoor (unskilled) day 2.80 560.00 1568.00
3104.66
MA 0% 0.00
Grand Total 3104.66
CP0% 0.00
Grand Total 3104.66

FOR FIRST FLOOR

Ground Floor Rate Sqm 3104.66
Add Lift charges charges Sqm 0.10 2504.75 250.48
3355.14
Plastering with CM (1:5), 12 mm
BLD-CSTN-6-3
thick
Unit = 10 sqm
A. MATERIALS:
Cement Mortor (1:5) cum 0.150 2123.58 318.54
B. LABOUR:
Mason 1st class day 0.45 670.00 301.50
Mason 2nd class day 1.050 605.00 635.25
Mazdoor (unskilled) day 2.80 560.00 1568.00
2823.29
Add Scafolding charges Sqm 10.00 9.55 95.50
MA 0% 0.00
Grand Total 2918.79
CP0% 0.00
Grand Total 2918.79

FOR FIRST FLOOR

Ground Floor Rate Sqm 2823.29
Add Lift Chargs Sqm 0.10 2504.75 250.48
Add Scafolding charges Sqm 10.00 13.20 132.00
3205.76
BLD-CSTN-6-8 Plastering with CM (1:5), 20 mm
60 thick
Unit = 10 sqm
A. MATERIALS:
Cement Mortar (1:5) cum 0.210 2123.58 445.95
B. LABOUR:
Mason 2nd class day 0.45 670.00 301.50
Mason 2nd class day 1.050 605.00 635.25
Mazdoor (unskilled) day 2.80 560.00 1568.00
2950.70
Add Scafolding charges Sqm 10.00 9.55 95.50
MA 0% 0.00
Grand Total 3046.20
CP0% 0.00
Grand Total 3046.20

FOR FIRST FLOOR

Ground Floor Rate Sqm 2950.70
Add Lift Chargs Sqm 0.10 2504.75 250.48
Add Scafolding charges Sqm 10.00 13.20 132.00
3333.18

Page 42 of 93
 S No Descitpion of item of Work per Quantiy Rate Amont

Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per
India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI
perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of
ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using
Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling
angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting
clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in
direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered
edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint
compound and paper tape to have a flush look including filling the tapered & square edges with
jointing compound, two coats of drywall topcoat complete for finished item of work as per Idia
Gypsum Ltd specification.

UNIT -1 sqm
A) Material requirement as per
India Gypsum
12.5 mm Gypboard
1219 mm x 1829 mm size Boards 1.03 285.00 292.30
BMT-M.01 sqm

Ceiling Angle
BMT-M.04 25 mm x 10 mm x 0.55 mm RM 0.64 80.00 51.20
BMT-M.17 Connecting Clips Nos 1.84 11.00 20.24
Ceiling Section
51.5 mm x 26 mm x 10.5 mm x 2.30 110.00 253.00
BMT-M.05 RM
0.55 mm thick
Intermediate Channel
45 mmx 15 mm x 15 mm x 0.9 mm 0.84 81.00 68.04
BMT-M.06 RM

Perimeter Channel
BMT-M.07 20 mm x 27 mm x 30 mm(web) of RM 0.40 72.00 28.80
BMT-M.18 0.55
Rawlmm
Plugthick Nos 0.64 4.00 2.56
BMT-M.20 Soffit Cleats Nos 0.64 4.00 2.56
BMT-M.21 Drywall Screws - 25 mm Nos 18.00 5.00 90.00
BMT-M.22 Jointing Compound Kgs 0.55 33.00 18.15
BMT-M.23 Jointing Paper Tape RM 1.46 6.24 9.11
BMT-M.24 Drywall Top Coat Lits 0.15 156.00 23.40
B) LABOUR CHARGES
1st Class Carpenter day 0.40 750.00 300.00
2nd Class Carpenter day 0.40 605.00 242.00
1st Class Painter day 0.08 750.00 60.00
2nd Class Painter day 0.08 605.00 48.40
Unskilled Mazdoor day 0.24 560.00 134.40
Power Drill - Hand Operated - 0.08 735.00 58.80
day
LAB-00025 Operator
Unskilled Mazdoor day 0.24 560.00 134.40
C) Machinery
Power Saw Cutter - Hand Operated 0.32 132.00 42.24
Hrs
BMC-X.02 - Hire charges
Power Drill - Hand Operated - Hire 0.64 121.00 77.44
Hrs
BMC-X.03 Charges
Scaffolding charges 1% 1957.04
BASIC COST per 1 sqm 1957.04

Page 43 of 93
S No Descitpion of item of Work per Quantiy Rate Amont

Anti corrosion CRPPC (Corrosion Resistant) inhibitive admixture Treatement of soil Beneath the
building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013
code specification & CIB RC registered termiticide which creates a continuouschemical barrier
beneath the building which kills or repels terminates & impervious to tremite entry Imidacloprid
30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5
Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back
filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the
horizontalsurface of basement top surface of the basement filling below flooring bed (Plinth) & @
2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns
& 300mm deep around plinth beams, basements & floor filling area including excavation channel
along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for
sparying, rodding etc. completefor furnished item of work as per the approval of the Engineer-in-
charge BMT-H. 66

Sqm 1 172 172

Supply and installation of Double grooved and precoated extruded mineral (cement)
roof tiles of size 420 mmx330 mm of corrugated profile tiles with variable overlapping for coverage
of 1-1.2 per tile with European standards BEEN 490:2004 Monotone colour ; Orange, red BMT-
C.53(a)
Sqm 1 1234.20 1234.2

Page 44 of 93
 S No Descitpion of item of Work per Quantiy Rate Amont

FLOORING SKIRTING AND DADOOING DATAS

BLD-CSTN-2-9 Plain Cement concrete (1:6:10) using 40 mm metal with Concrete mixture upto Plinth level
Unit = 1cum
A. MATERIALS:
Cement kg 129.60 4220.00 546.91
Coarse aggregate 40 mm cum 0.90 1035.90 932.31
Fine aggregate (Sand for Concrete) cum 0.54 642.30 346.84
B. MACHINERY
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity hour 1.00 692.70 692.70
C. LABOUR:
Mason 1st class day 0.10 670.00 67.00
Mazdoor (unskilled) day 1.39 560.00 778.40
Water Charges 1% 1% 33.64
Grand Total 3397.81
CP0% 0.00
Grand Total 3397.81
Flooring with 100mm thick Cement Concrete 1:6:10, using 40mm metal, 100mm thick and 20 mm
BLD-CSTN-7-14 Cement Concrete surface (Ellis Pattern, 1st Sort)
Unit = 10 sqm
A. MATERIALS:
Cement Concrete 1:6:10 using concrete mixer cum 1.000 3397.81 3397.81
Stone Chippings 3.34 mm - 10 mm cum 0.250 1144.65 286.16
Cement kg 120.000 4220.00 506.40
B. LABOUR
Mason 1st class day 0.150 670.00 100.50
Mason 2nd class day 0.350 605.00 211.75
Mazdoor (unskiled) day 5.40 560.00 3024.00
Water Charges 1% 1% 41.29
Grand Total 7567.91
CP0% 0.00
Grand Total 7567.91

Flooring with Non-skid red or white full body Ceramic floor tiles of Size 600 mm x 600mm and
thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15)
of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm
thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency
BLD-CSTN-7-6 spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of
matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including
seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all
materials.

Unit = 10 sqm
A. MATERIALS:
Ceramic tiles BMT-C.03 sqm 10.10 520.00 5252.00
Cement for CM (1:8) for base coat kg. 21.60 4220.00 91.15
Cement for slurry kg. 33.00 4220.00 139.26
White cement BMS-W.68 kg. 2.00 31.00 62.00
Sand for CM (1:8) cum 0.12 758.30 91.00
B. LABOUR
Mason 1st class day 0.96 670.00 643.20
Mason 2nd class day 2.24 605.00 1355.20
Mazdoor (unskiled) day 3.30 560.00 1848.00
Add Water Charges 1% 94.82
Grand Total 9576.63
CP0% 0.00
Grand Total 9576.63
 S No Descitpion of item of Work per Quantiy Rate Amont

FLOORING SKIRTING AND DADOOING DATAS

Providing skirting to internal walls to 15 cm height/risers of steps with ceramic tiles 7.30 mm thick
length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey
like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with
BLD-CSTN-7-18 pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water
etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the
cost of conveyance of all materials

Unit = 10 sqm
A. MATERIALS:
Ceramic tiles 7.30 mm thick sqm 10.00 520.00 5200.00
Sand for cm 1:3 base coat cum 0.12 758.30 91.00
Cement for cm 1:3 base coat kgs 57.60 4.22 243.07
Cement for slurry kgs 33.00 4.22 139.26
White cement for jointing & pointing kgs 6.00 31.00 186.00
B. LABOUR
Mason 1st class day 0.77 670.00 515.90
Mazdoor (unskiled) day 0.80 560.00 448.00
Add Water Charges 1% 68.23
Grand Total 6891.46
CP0% 0.00
Grand Total 6891.46
Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with
double layer pigment of Size 600 x 600 mm of 1st quality, set over base coat of cement mortar (1:8),
12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with
BLD-CSTN-7-5 pigment of matching shade, including cost of all materials like cement, sand water and tiles etc.,
complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost
of conveyance of all materials.

Unit = 10 sqm
A. MATERIALS:
Vitrified tiles of 1st quality of size 600x600 BMT-C.09 sqm 10.10 612.00 6181.20

Cement for CM (1:8) for base coat kg. 21.60 4.22 91.15
Cement for slurry kg. 33.00 4.22 139.26
Cement for Pointing with CM (1:3) kg. 6.000 4.22 25.32
Sand for CM (1:8) cum 0.12 758.30 91.00
Sand for pointing cum 0.020 758.30 15.17
B. LABOUR
Mason 1st class day 0.96 670.00 643.20
Mason 2nd class day 2.24 605.00 1355.20
Mazdoor (unskiled) day 3.30 560.00 1848.00
Add Water Charges 1% 42.08
10431.58
CP0% 0.00
Grand Total 10431.58

Providing skirting to internal walls to 15 cm height/risers of steps with vitrified tiles length equal to
flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,
complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost
of conveyance of all materials

Unit = 10 sqm
A. MATERIALS:
Vitrified tiles polished 1st quality sqm 10.10 612.00 6181.20
Sand for cm 1:5 base coat cum 0.12 758.30 91.00
Cement for cm 1:5 base coat kgs 34.56 4.22 145.84
Cement for slurry kgs 33.00 4.22 139.26
S No Descitpion of item of Work per Quantiy Rate Amont

FLOORING SKIRTING AND DADOOING DATAS

White cement for jointing & pointing kgs 2.00 31.00 62.00
B. LABOUR
Mason Ist class day 0.96 670.00 643.20
Mason 2nd class day 2.24 605.00 1355.20
Mazdoor (unskilled) day 3.30 560.00 1848.00
Add Water Charges 1% 104.66
10465.70
CP0% 0.00
Grand Total 10465.70

Dadooring to walls with digital / polished glazed full body porcelain highlighter wall tiles of size 300
x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc.,
scratch less, stain free and thickness between 6-8 mm, set over base coat of cement mortar (1:6), 12
mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like cement, sand water and tiles etc.,
complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost
of conveyance of all materials

Unit = 10 sqm
A. MATERIALS:
polished glazed full body porcelain sqm 10.10 605.00 6110.50
highlighter wall tiles of size 300 x 600 mm BMT-C.26

Cement for CM (1:6) for base coat kg. 28.80 4.22 121.54
Cement for slurry kg. 33.00 4.22 139.26
White cement for jointing & pointing kg. 6.00 31.00 186.00
Sand for CM (1:6) cum 0.12 758.30 91.00
B. LABOUR
Mason 1st class day 0.96 670.00 643.20
Mason 2nd class day 2.24 605.00 1355.20
Mazdoor (unskiled) day 3.30 560.00 1848.00
Add MA 0% on labour 0.00
Add water charges 1% 0.00% 104.95
Grand Total 10599.65
Add 0% Over head Charges 0.00
10599.65
 S No Descitpion of item of Work per Quantiy Rate Amont

PAINTINGS
White washing two coats with whiting of approved quality to give an even shade after thoroughly
brushing the surface to remove all dirt and remains of loose powdered materials including cost of
BLD- all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for
CSTN-9-5 finished item of work, but excluding conveyance charges of materials

Unit: 10 sqm
A. MATERIALS :
Whiting / White Cement cum / kg 2.00 31.00 62.00
B. LABOUR
Brick Layers / Painter Page 65 of SSR day 0.210 670.00 140.70
Mazdoor (unskilled) day 0.320 560.00 179.20
MA 0% 0.00
Sundries including brushes, ladders, etc., 1.00% 3.82
385.72
CP0% 0.00
Grand Total 385.72
Painting to new walls with 2 coats of snocem paint Over a primary coat of whtie cement (making
3 Coats) in all to give an even shade after thourughly brushing the surface to remove all dirt and
BLD- remains of loose powdered materials, including cost and conveyance of all materials to work site
CSTN-10-5 and all operational, incidental, labour charges etc. complete for finished item of work as per SS
912 for internal walls

BLD- White Cement Prime coat

CSTN-9-4
A. MATERIALS :
Whiting / White Cement cum / kg 1.20 31.00 37.20
B. LABOUR
Brick Layers / Painter Page 65 of SSR day 0.11 670.00 73.70
Mazdoor (unskilled) day 0.22 560.00 123.20
MA 0% 0.00
Sundries including brushes, ladders, etc., 0.50% 1.17
b Snocem paint 2 coats
Unit: 10 sqm
A. MATERIALS :
Cement Paint at 3 sqm., per kg kg 3.500 54.00 189.00
B. LABOUR
Painter 1st class day 0.150 750.00 112.50
Painter 2nd class day 0.350 605.00 211.75
Mazdoor (unskilled) day 1.500 560.00 840.00
MA 0% 0.00
Sundries including brushes, etc., 1.000% 13.53
Total cost 1602.05
CP0% 0.00
Grand Total 1602.05
Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade
over a base coat of approved cement primer grade I making making 3 coats in all to give an even
BLD- shade after thourughly brushing the surface to remove all dirt and remains of loose powdered
CSTN-10-5 materials, including cost and conveyance of all materials to work site and all operational,
incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls

144 Cost of Cement Primer kg 1.00 173.00 173.00

Ist class painter day 0.21 750.00 157.50
2nd class painter day 0.49 605.00 296.45
MA 0% 0.00
Cost of water proof cement Paint of
approved quality kg 3.50 54.00 189.00
1st class painter day 0.15 750.00 112.50
 S No Descitpion of item of Work per Quantiy Rate Amont

PAINTINGS
2nd class painter day 0.35 605.00 211.75
Mazdoor (unskilled) day 1.50 560.00 840.00
MA 0% 0.00
Total cost 1980.20
BLD- Painting with Synthatic Enamil Paint Two coats over a Primary coat of white lead including cost
CSTN-10- and conveyance of all mateirals etc complete
12
a PRIME COAT WITH WHITE LEAD
white lead kg 1.600 121.00 193.60
B. LABOUR
Painter day 0.700 750.00 525.00
Add MA 20/0% on labour 0.00
b Painting with Synthetic Enamel paints - Two Coats - for New Wood Work
A. MATERIALS :
Synthetic Enamel paint L 1.200 191.00 229.20
B. LABOUR
Painter day 1.200 750.00 900.00
Add MA 20/0% on labour 0.00
Total cost for 10 sqm 1847.80
CP0% 0.00
Grand Total 1847.80

Plastic Emulsion paint-2 coats-Internal Walls

Painting to new walls with 2 coats of plastic emulsion paint over a priamry coat of white cement of
approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of
loose powdered materials, including cost and conveyance of all materials to work site and all
operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for
internal walls

BLD- White Cement Prime coat

CSTN-9-4
A. MATERIALS :
Whiting / White Cement cum / kg 1.20 31.00 37.20
B. LABOUR
Brick Layers / Painter Page 65 of SSR day 0.11 500.00 55.00
Mazdoor (unskilled) day 0.22 560.00 123.20
Add MA 20/0% on labour 0.00
Sundries including brushes, ladders, etc., 0.50% 1.08
Plastic Emulsion paint Lr 0.80 201.00 160.80
Painter 1st class Nos 0.36 750.00 270.00
Painter 2nd class Nos 0.84 605.00 508.20
Add MA 20/0% on labour 0.00
Sundries for Spraying Machine etc., LS 1.44
Unit -10Sqm 1156.92
CP0% 0.00
Grand Total 1156.92
Plastic Emulsion paint-2 coats-External Walls
Painting to new walls with 2 coats of plastic emulsion paint over a priamry coat of white cement of
approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of
loose powdered materials, including cost and conveyance of all materials to work site and all
operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for
External walls

BLD- White Cement Prime coat

CSTN-9-4
A. MATERIALS :
Whiting / White Cement cum / kg 1.20 31.00 37.20
B. LABOUR
S No Descitpion of item of Work per Quantiy Rate Amont

PAINTINGS
Brick Layers / Painter Page 65 of SSR day 0.11 500.00 55.00
Mazdoor (unskilled) day 0.22 560.00 123.20
Add MA 20/0% on labour 0.00
Sundries including brushes, ladders, etc., 0.50% 1.08
Plastic Emulsion paint Lr 0.8 201.00 160.80
Painter 1st class Nos 0.21 750.00 157.50
Painter 2nd class Nos 0.49 605.00 296.45
Mazdoor Nos 1.5 560.00 840.00
Add MA 20/0% on labour 0.00
Sundries for Spraying Machine etc., LS 4.36
Unit -10Sqm 1675.59
CP0% 0.00
Grand Total 1675.59
Providing and applying synthetic plaster putty or plaster of paris putty or lime punning
of average 1 to 2 mm thickness over plastered surface to prepare the surface even and
smooth after thoroughly brushing the surface to remove all dirt and remains of loose
powdered materials, applying emery paper, Sand the surface, clean & wipe off loose
dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand
with 180 and 320 No., emery paper for the surface preparation including cost and
conveyance of all materials to work site and all operational, incidental, labour charges
etc. complete for finished item of work for Internal walls

Total cost for 10 sqm

A) MATERIALS :

Synthetic/ Plaster of Paris Putty BMT-J.31 KG 23.00 30.30 696.90

B) LABOUR
Painter - 1st Class day 0.273 750.00 204.75
Painter - 2nd class day 0.637 605.00 385.39
Mazdoor Day 0.91 560.00 509.60
C) Labour Allowance on B 219.947
Sundries for Emery papers, fillers, knife
etc., LS 4.70
2021.28
13.615% 275.20
2296.48
Providing and applying synthetic plaster putty or equivalent putty such as birla wall care
putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3
mm thickness over plastered surface to prepare the surface even and smooth after
thoroughly brushing the surface to remove all dirt and remains of loose powdered
materials, applying emery paper, Sand the surface, clean & wipe off loose dust,
applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the
surface preparation including cost and conveyance of all materials to work site and all
operational, incidental, labour charges etc. complete for finished item of work for
external walls - excluding cost of access scaffolding

Synthetic/ Plaster of Paris Putty BMT-J.31 KG 34.50 30.30 1045.35

B) LABOUR
Painter - 1st Class day 0.546 750.00 409.50
Painter - 2nd class day 1.274 605.00 770.77
Mazdoor Day 1.82 560.00 1019.20
C) Labour Allowance on B 439.894
Sundries for Emery papers, fillers, knife
etc., LS 4.91
3689.62
S No Descitpion of item of Work per Quantiy Rate Amont

PAINTINGS
13.615% 502.34
4191.97
S No Descitpion of item of Work per Quantiy Rate Amont

WOOD WORK DATAS

Cost and Supply and fabrication charges of MS Iron gills for Windows and Verandah Grills
MS Flats Kg 1.00 61.00 61.00
Fabrication Charges Kg 1.00 33.00 33.00
Fixing Charges Kg 1.00 6.00 6.00
MA 0% 0.00
100.00
CP0% 0.00
Grand Total 100.00
2 Supply and fixing of Sal wood fully Panelled Door of size 1.20 x 2.10 met. with double shutters
including cost and conveyance of all materials and labour charges and fixing all necessary fittings
like Z-Hold fasts, Hinges, tower bolts, Aldrops etc. complete as per specifications

Door size 1.20 X 2.10 mts

Frames :
Cost of Salwood for frames cum 0.0473 53275.00 2519.91
Shtters :
Cost of Salwood for shutters cum 0.0756 66549.00 5031.10
Total wood Qty. cum 0.1229
Labor charges :
Labour charges for wrought and put up
including fixing in position frames of any
size,shutters for doors,windows, ventilators
including fixing all necessary fixtures etc.for
Sqm 2.5200 1871.00 4714.92
Other than teak wood Fully panelled
oorsexternal or internal including frame BMM-
V.38

Sub-Total ( for 1.20 x 2.10 M size ) 12265.93

3 Door size 0.90 X 2.10 Mts

Door size 1.20 x 2.10 Mt Rate = Rs.10282.06

Door size 0.90 x 2.10 Mt Rate =

Rs.10282.06 x (0.90x2.10) / (1.20x2.10) = 9199.45
4 Door size 0.75 X 2.10 Mts

Door size 1.20 x 2.10 Mt Rate = Rs.10282.06

Door size 0.75 x 2.10 Mt Rate =

Rs.10282.06 x (0.75x2.10) / (1.20x2.10) = 7666.21
5 Supply and fixing of Sal wood fully Panelled Window of size 0.90 x 1.35 met. including cost and
conveyance of all materials and labour charges and fixing of Iron Grill of suitable design to frame
and all necessary fittings like Z-Hold fasts, Hinges, tower bolts,wind appliances etc. complete as
per specifications

Windows (double shutter) size 0.91X1.22mts

Frames :
Cost of Salwood for frames cum 0.0266 53275.00 1417.12
Shtters :
Cost of Salwood for shutters cum 0.0288 66549.00 1916.61
Total wood Qty. cum 0.0554
Labor charges :
S No Descitpion of item of Work per Quantiy Rate Amont

WOOD WORK DATAS

Labour charges for wrought and put up
including fixing in position frames of any
size,shutters for doors,windows, ventilators
including fixing all necessary fixtures etc.for
cum 1.1102 1871.00 2077.18
Other than teak wood Fully panelled
oorsexternal or internal including frame BMM-
V.38

Total ( for 0.91 x 1.22 M size ) 5410.91

Window size 0.90 X1.35 Mts

Window size 0.91 x 1.22 Mt Rate = Rs.4531.65

Window size 0.90 x 1.35 Mt Rate =

Rs.4531.65 x (0.90x1.35) / (0.91x1.22) = 5921.69
Fixtures :
Iron grills with M.S.Flats (0.90*1.35*16=19.44 20.00 100.00 2000.00
Kgs
or 20 Kgs)
Total for each Window : (0.90 X 1.35 M) 7921.69
 DATA (ROAD WORK) - SSR 2015-16

S.N
Description of item Unit Qty Rate Amount
o.
Clearing the Light Jungle on either side of Road margins inlcuidng removing burning ashes etc compelte as
1 per standards specifications

Unit = 10 sqm 10Sqm 2.80 2.80

Clearing the heavy Jungle on either side of Road margins inlcuidng removing burning ashes etc compelte as
2 per standards specifications

Unit = 10 sqm 10Sqm 3.20 3.20

Scarifying existing granular surface to a depth of 50 mm and disposal of scarified material with all lifts and
3 leads upto 1000 m as per Technical Specification Clause 305.4.3 MORTH
Unit = sqm
Taking output = 100 sqm
Labour
Mazdoor (Unskilled) day 4.160 560.00 2329.60
Machinery
Tractor with trolley hour 1.000 543.00 345.00
2674.6
Cost for 100 sqm = a+b+c+d 26.75
Rate per sqm = (a+b+c+d)/100

Uprooting and removing stumps of date trees including

4 stacking of girth 30 to 100 cm.
Unit = each 24.00

a) Excavation in Cutting in Soil by manual means with lead

5
upto 50 m
Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with initial lift of 3
mts and lead upto 50 m as per Technical Specification Clause 302.3 MORD

Unit = cum
Taking output = 120 cum
a) Labour
Mazdoor (Unskilled) day 46.800 560.00 26208.00
Cost of 120 cum = a+b+c 218.40
Rate per cum = (a+b+c)/120

6 b) Excavation in Cutting in Soil by manual means with lead

beyond 250Mts
Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with initial lift of 3
mts and lead 250 m as per Technical Specification Clause 301 MORTH

Unit = cum
Taking output = 120 cum
a) Labour
Mazdoor (Unskilled) day 46.800 560.00 26208.00
b) Machinery
Truck 5.5 cum capacity hour 10.000 1242.70 12427.00
Cost of 120 cum = a+b+c+d 38635.00
Rate per cum = (a+b+c+d)/120 321.96

7 WBM Grading 2 (using Graded Metal)

Page 54 of 93
S.N
Description of item Unit Qty Rate Amount
o.
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam
specification including spreading in uniform thickness, hand packing, rolling with Vibratory Roller 80-100 KN in
stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the
interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical
Specification Clause 405 MORD by manual means using HBG metal 60-63 mm (50%),40-45 mm metal (46%) and
HBG machine crushed metal 19-22 mm(4%) for compacted thickness of 75 mm , but excluding VAT

By Manual means
Taking out put = 360 cum
Labour
Mazdoor (Skilled) day 12.08 560.00 6764.80
Mazdoor (unskilled) day 250.00 560.00 140000.00
Machinery
Vibratory Roller 80-100 KN @60cum per hour OR hour 6.00 3499.60 20997.60
Three wheel 80-100 kN static roller @ 10 cum per hour hour 30.00 1743.60 52308.00
Water tanker 6kl capacity hour 24.00 822.00 19728.00
Material (Total Qty 435.60 Cum)
60-63 mm IRC HBG Metal (50% of 435.60 cum) Cum 217.80 597.90 130222.62
40-45 mm IRC HBG Metal (46% of 435.60 cum) Cum 200.38 1005.90 201562.24
19-22 mm IRC HBG M/C Metal (4% of 435.60 cum) Cum 17.42 1518.40 26450.53
Stone Screening
Type B 11.2 mm for Grading 2 @ 0.18 / 0.20 cum/10sqm cum 86.40 902.57 77981.76
Binding Material @ 0.06 cum per 10 sqm for Grading 2 material cum 28.80 485.90 13993.92

Basic rate for 360 Cum 690009.47

Rate per Cum 1916.69
Rate per cum 1916.69
Add for conveyance for Metal cum 1.21 0.00 0.00
Add for conveyance for Metal cum 0.32 0.00 0.00
Rate per cum 1916.69

8 WBM Grading 3 (using Graded Metal)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam
specification including spreading in uniform thickness, hand packing, rolling with Vibratory Roller 80-100 KN in
stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse
aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405
MORD/ MORTH 404 by manual means using HBG machine crushed metal of 40-45 mm (82%) and 19-22 mm (18%)
for compacted thickness of 75 mm, , But excluding VAT

By Manual means
Taking out put = 360 cum
Labour
Mazdoor (Skilled) day 12.08 560.00 6764.80
Mazdoor (unskilled) day 250.00 560.00 140000.00
Machinery
Vibratory Roller 80-100 KN @60cum per hour OR hour 6.00 3499.60 20997.60
Three wheel 80-100 kN static roller @ 10 cum per hour hour 30.00 1743.60 52308.00
Water tanker 6kl capacity hour 24.00 822.00 19728.00
Material (total Qty of Metal 435.60 Cum)
40-45 mm IRC HBG M/c Metal ( 82% of 435.60 Cum) Cum 357.19 1005.90 359297.42
19-22.40 mm IRC HBG M/c Metal ( 18% of 435.60 cum) Cum 78.41 1518.40 119057.74
Stone Screening
Type -B 11.2mm @ 0.18 cum per 10 sqm cum 86.40 694.65 60017.76
(rate of 2.36 mm & below)
Binding Material
Basic rate for 360 Cum 778171.32
Rate per Cum 2161.59
Add for conveyance for Metal cum 1.45 0.00 0.00
Page 55 of 93
 S.N
Description of item Unit Qty Rate Amount
o.
Rate per cum 2161.59

9 Only Gravel Base (Table 400.2) Grading C

Construction of granular sub-base/shoulders using Gravel & Sand by providing well graded material, spreading in
uniform layers with motor grader on prepared surface and compacting with Vibratory Roller 80-100 KN @10cum per
hour capacity to achieve the desired density, complete as per Technical Specification Clause 402 MORD, , But
excluding VAT

Taking out put = 300 cum

Using naturally occurring gravel
Labour
Mazdoor (Skilled) day 2.40 560.00 1344.00
Mazdoor (Un-Skilled) day 8.00 560.00 4480.00
Machinery
Vibratory Roller 80-100 KN @10cum per hour hour 6.00 3499.60 20997.60
Three wheel 80-100 kN static roller @ 10 cum per hour hour 30.00 1743.60 52308.00
Water tanker 6kl capacity hour 5.00 822.00 4110.00
Material
Well graded granular sub-base material as per table 400.2
Cost of materials
9.5 mm to 4.75 mm @ 66% (Gravel) cum 237.60 192.30 45690.48
2.36 mm below @ 34% (Sand) cum 122.40 497.30 60869.52

Basic rate of Granular sub base for 300 cum 189799.60

Basic rate of Granular sub base cum 632.67
632.67
Add for conveyance for Gravel cum 0.79 37.30 0.00
Add for conveyance for sand cum 0.41 37.30 0.00
380864.54
Rate per cum 1269.55

Gravel + Sand mix Data

Gravel / Soil - Aggregate Base (Table 400.2) Grading C
a) Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor
grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three
wheel 80-100 kN static roller / Vibratory Roller 80-100 kN capacity to achieve the desired density, complete as per
Technical Specification Clause 402 MORD
iii
Unit = cum
Taking output = 300 cum
a) Labour
Mate day -
Mazdoor (Skilled) day 2.40 560.00 1344.00
Mazdoor (Unskilled) day 8.00 560.00 4480.00
b) Machinery
Motor grader 110 HP @ 50 cum per hour hour 6.00 0.00
Three wheel 80-100 kN static roller @ 10 cum per hour hour 30.00 1743.60 52308.00
OR 0.00
Vibratory Roller 80-100 kN hour 6.00 0.00 0.00
Water tanker 6 kl capacity hour 5.00 822.00 4110.00
Tractor with Rotavator 25 cum per hour hour 12.00 543.00 6516.00
c) Material 0.00
For well graded granular sub-base materials as per Table 400.2 0.00

For Grading C Material 0.00

9.5 mm to 4.75 mm @ 66 per cent cum 255.00 192.30 49036.50
Page 56 of 93
S.N
Description of item Unit Qty Rate Amount
o.
2.36 mm below @ 34 per cent cum 129.00 497.30 64151.70
d&e) Overheads & Contractors Profit 181946.20
Cost for 300 cum = a+b+c+d+e (3 Wheel Roller) 181946.20
Rate per cum = (a+b+c+d+e)/300 606.49
Cost for 300 cum = a+b+c+d+e (Vibratory Roller)
Rate per cum = (a+b+c+d+e)/300
10 Granular sub-base/base/surface course/Shouders with local materials (Table 400.13) by mix in place method normal
Construction of granular sub-base by providing local material spreading in uniform layers compacting with smooth
wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408
MORD.

Unit = cum
Taking output = 300 cum
a) Labour
Mazdoor (Skilled) day 2.48 560.00 1388.80
Mazdoor (Unskilled) day 8.00 560.00 4480.00
b) Machinery
Three wheel 80-100 kN static roller @10 cum per hour hour 30.00 1743.60 52308.00
Water tanker 6 kl capacity hour 5.00 822.00 4110.00
c) Material
Gravel cum 384.00 192.30 73843.20
Cost for 300 cum = a+b+c+d+e 136130.00
Rate per cum = a+b+c+d+e/300 453.77

11 Cement Concrete Pavement

Construction of un-reinforced, dowel jointed at expension and construction joint only, plain cement concrete
pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause
1501.22 M20(Grade), course and fine agregates conforming to IS:383 maximum size of course agregate not
exceeding 25mm, mixed in a concrete mixer of not less than 0.2cum capacity and appropriate weigh batcher using
approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick
polythene film, including levelling the form work as per drawing), spreading the concrete with plate vibrators and
finished in continous operation including provision of contraction and expansion joints, curing of concrete slabs for
14 days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical
specification clause 1501.22 but excluding VAT.

Unit = cum
Taking output = 75cum (172.50 t)
(100x3.75 x 0.200)
Labour
Mason (1st class) day 5.00 670.00 3,350.00
Mason (2nd class) day 5.00 605.00 3,025.00
Mazdoor (unskilled) day 150.00 560.00 84,000.00
Mazdoor(skilled) day 6.00 560.00 3,360.00
Mazdoor (semi-skilled) day 6.00 560.00 3,360.00
97095.00
Machinery
Concrete mixer 0.28/0.40 cum capacity ( 6 mixers) with weight Hour 36.00 692.70 24,937.20
batcher and suitable capacity calibrated water tank
Plate vibrator Hour 9.00 70.00 630.00
Water tanker 6 Kl. Capacity Hour 5.00 822.00 4,110.00
29,677.20
Material
Crushed stone coarse aggregates, grading will be as per clause
1501.2.4.1 (Table 1500.1) of specifications @ 0.90 Cum/cum of
concrete
20mm Cum 44.55 1658.40 73,881.72
12mm Cum 22.95 1342.15 30,802.34
Sand as per IS:383 and conforming to clause 1500.2.4.2. @ 0.45 cum 33.75 642.30 21,677.63
cum of concrete
Cement @ 330 Kg/cum of concrete t 24.75 4220.00 104,445.00
Page 57 of 93
S.N
Description of item Unit Qty Rate Amount
o.
Polythene sheet 125 micron sqm 412.5 15.25 6,290.63
Joint filler board 12.70 mm thick as per IS:1838 sqm 3.00 #REF! #REF!
(4x3.75x0.200 = 3 sqm) #REF!
#REF!
Form work @ 3% on (a+b+c) #REF!
Cost for 75 cum = a+b+c+d #REF!
Rate per Cum = (a+b+c+d+e)/75 #REF!
Rate per cum #REF!

144 Cutting of Grooves 75mm deep with petrol saw as per the direction of Engineer-in-charge, inclusive of all machinary
and labour charges for finished item of work complete

Unit 100 Rm
A) Machenary:
Generator 35 KVA (3Phase) Hr 4.00 882.90 3531.60
Floor Saw cutting hire charges Rm 1.00 15.00 15.00
Water Tanker Hr 4.00 630.00 2520.00
B) Labour:
Floor saw cutter Skilled No. 0.50 420.00 210.00
Floor saw cutter unskilled No. 1.00 370.00 370.00
Man Mazdoor No. 1.00 370.00 370.00

Provision towards fillilng the joints bitumen Rate as per SSR 2017-18 Rm 1.00 15.00 15.00
Add MA on labour 0% 0.00
Cost per 100 Rm 7031.60
Cost per 1 Rm 70.316
12 B T Prime Coat
Low porosity
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including
cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per
Technical Specification Clause 502 MORD (for use on Wet mix macadam & WBM) ,including overhead charges &
Contractors profit but excluding VAT.

Unit = sqm
Taking output = 1750 sqm
a) Labour
Mate day -
Mazdoor (Unskilled) day 1.040 560.00 582.40
b) Machinery
Hydraulic broom @ 1250 sqm per hour hour 1.400 455.00 637.00
Air compressor 210 cfm hour 1.400 633.00 886.20
Bitumen emulsion pressure distributor @ 1750 sqm/hour hour 1.000 1073.00 1073.00
Water tanker 6 kl capacity 1 trip per hour hour 0.500 822.00 411.00
c) Material
Bitumen emulsion (SS-1) @ 0.85 kg per sqm t 1.480
Rate per sqm

B T Teak coat
13 Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30
kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical
Specification Clause 503 MORD,including overhead charges & Contractors profit but excluding VAT.
Unit = sqm
Taking output = 1750 sqm
a) Labour
Mazdoor (Unskilled) day 1.040 560.00 582.40
b) Machinery
Hydraulic broom @ 1250 sqm per hour hour 1.400 455.00 637.00
Air compressor 210 cfm hour 1.400 633.00 886.20
Page 58 of 93
S.N
Description of item Unit Qty Rate Amount
o.
Emulsion pressure distributor @1750 sqm per hour hour 1.000 1073.00 1073.00
c) Material
Bitumen emulsion (RS-1) @ 0.275 kg per sqm t 0.480 0.00
Cost of 1750 sqm = (a+b+c+d+e)
Rate per sqm = a+b+c+d+e/1750
Rate per sqm

BT OGPC Layer
Providing and laying Open Graded Premix Carpet (OGPC) surfacing material of 20 mm thick composed of 13.20 mm
to 5.60 mm size machine crushed hard blasted granite chips using bitumen of 60/70 grade at the rate of 14.60 kgs
per 10 sqm area of road surface over tack coat to required line, level, grade to serve as wearing course on
previously prepared base including mixing in a Mixer of 6 to 10 T capacity,trasporting the mixer to point of use and
rolloing with three wheeled 8-10 Tonnes capacity static roller and finishing to required level and grades including
14 cost and conveyance of all materials from approved sources, seigniorage, labour charges and hire and operational
charges of power road roller and all other machinery, tools and plants, providing barricading for diversion of traffic,
erecting red flags other incidental and operational charges etc., complete for finished item of work by manual means
as per technical specification clause 508(ii) of MORD including overheads & Contractors profit but excluding VAT.

By manual means as per 508 (II) of MORD

Bitumen (S-65)
Unit = sqm
Taking output = 500 sqm (10 cum)
Labour
Mazdoor (Unskilled) day 21.00 560.00 11,760.00
Mazdoor (semi-Skilled) day 7.08 560.00 3,964.80
Machinery
Mix all 6/10 T capacity hour 4.00 15.25 61.00
Bitumen boiler oil fired 1000 lts capacity fitted with spray set hour 4.00 261.00 1,044.00
Three wheel 80-100 kN static roller hour 2.00 1743.60 3487.20
Material
Bitumen (S-65) @ 14.60 kg per 10 sqm t 0.73 0.00
Crushed stone chipping, 13.2 mm to 5.6 mm @ 0.27 cum per 10 cum 13.50 1,096.15 14,798.03
sqm(average of 12-14 mm,9.5-11.2mm & 5-7 mm metal)
Basic rate for 500 Sqm 35,115.03
Basic rate per Sqm 70.23
Add for conveyance for Metal cum 0.03 35.90 0.97
Rate per 500sqm
Rate per 1 Sqm
B T Seal Coat
Providing and laying bituminous liquid seal coat (Type A) comprising of a layer of bitumuneous binder followed by a
cover of stone chipping of grading as defined in table 500.16 of MOST at 0.09 cum/10sqm of chips to be laid
simultaneously along with the bitumunous course using 9.80 kgs of bitumen 60/70 grade for 10 sqm and rolling with
three wheel 80-100 kN static roller including of required line, level, grade to serve as wearing course on previously
prepared surface and finishing to rquired level and grades including cost and conveyance of all materials from
15 approved sources and stacking at site to departmental gauge for premeasurements, seigniorage, labour charges
and hire and operational charges of three wheel 80-100 kN capacity static roller and all other machinery, tools and
plants, providing barricading for diversion of traffic, erecting red flags other incidental and operational charges etc.,
complete for finished item of work as per technical specification clause 510 of MORD by maual means but excluding
VAT.

By Manual Means
Taking out put = 1100 Sqm
Labour
Bitumen Sprayer day 1.00 560.00 560.00
Mazdoor (un-skilled) day 22.00 560.00 12320.00
Mazdoor (semi-skilled) day 7.15 560.00 4004.00
Machinery
Bitumen boiler oil fired, capacity1000 lts fitted with spray set hour 2.20 261.00 574.20
Three wheel 80-100 kN static roller hour 2.20 1743.60 3835.92
Page 59 of 93
S.N
Description of item Unit Qty Rate Amount
o.
Materials
Bitumen (S-65) 60/70 grade @ 9.80 kgs per 10 sqm. t 1.078
Crushed stone chipping of 6.7 mm size 100% passing 11.2mm cum 9.90 892.15 8832.29
seive and retained on 2.36 mm sieve applied @ 0.09 cum per 10
sqm.
Basic rate of Seal coat Type-A for 1100 Sqm

Final Rate per sqm

Add for conveyance for Metal cum 0.01 35.90 0.00
Rate per 1100sqm
Rate per 1 Sqm
Providing concrete for Vibrated cement concrete M 15 grade using 20 mm to 12 mm size Graded hard stone
aggregateincluding cost and conveyance of all materias inclusive of seignorage charges, machine mixing, placed in
RBR-FNDN-4

foundation and compacted by vibration including curing for 14 days complete for Side drain Portion as per drawings
and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

Nominal mix 1:2:4 using concrete mixer (MORD)

Unit = cum
a) Material
Cement M.T. 0.250 4220.00 1055.00
Sand for Concrete cum 0.45 642.30 289.04
20 mm aggregate cum 0.54 1658.40 895.54
12 mm aggregate cum 0.36 1342.15 483.17
c) Labour
Mason (1st Class) day 0.10 670.00 67.00
Mazdoor (Unskilled) day 1.39 560.00 778.40
MA @ 0.00
d) Machinery
Mechnical concrete mixer hour 0.40 692.70 277.08
Vibrator hour 0.40 274.40 0.00
Water tanker 6kl capacity hour 0.13 822.00 0.00
Sub Total 3845.23
f) Formwork @ 4 % on cost of material, labour and machinery
4% 153.81
(a+b+c+d+e)
Rate per 1 cum (a+b+c+d+e+f) 3999.04

For CD Works ( CULVERTS PIPE CULVERTS AND DRAINS)

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out,
construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50
16 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical
Specification 305 MORD / 304 MORTH
Manual Means
Upto 3 m depth
Unit = cum
Taking output = 10 cum
a) Labour
Mazdoor (Unskilled) day 3.64 560.00 2038.40
Cost for 10 cum = a+b+c 203.84
Rate per cum = (a+b+c)/10
17 Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304
MORTH
Sand filling
Unit = 6cum
a) Labour
Mate day -

Page 60 of 93
S.N
Description of item Unit Qty Rate Amount
o.
Mazdoor (Unskilled) day 0.31 560.00 173.60
b) Material
Sand cum 6.00 497.30 2983.80
3157.40
Rate per cum 526.23

Providing concrete for plain concrete M 10 grade in open foundations using 40 mm nominal size Graded hard
stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days
16 complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100
MORTH ,including overhead charges & Contractors profit but excluding VAT.

P.C.C grade M 10
Nominal mix 1:3:6
Unit = cum
(a) Material
Cement t 0.22 4220.00 928.40
Coarse sand cum 0.45 642.30 289.04
40 mm aggregate cum 0.9 1035.90 932.31
(b) Labour
Mate day -
Mason (1st Class) day 0.10 670.00 67.00
Mazdoor (Unskilled) day 1.39 560.00 778.4
(c) Machinery
Mechanical concrete mixer 0.4/0.28 cum capacity fitted with water hour 0.40 692.70 277.08
measuring device and preferably also with load cell.
Water tanker 6 kl capacity hour 0.13 822.00 106.86
3379.09
(d) Formwork @ 4% on cost of material, labour and machinery 4.00% 135.16
(a+b+c)
3514.25
Add for conveyance for Metal cum 0.90 35.90 32.31
Add for conveyance for Sand cum 0.45 37.30 16.79
Rate per cum = a+b+c+d+e+f 3563.35

P.C.C grade M 15 (MORD) For Sub Structure of Culverts and

Drains
Nominal mix (1:2.5:5) (Mechanical Mixer)
Unit = cum
(a) Material
Cement t 0.28 4,220.00 1,160.50
Coarse sand cum 0.48 642.30 308.30
40 mm aggregate cum 0.48 1,035.90 497.23
20 mm aggregate cum 0.24 1658.40 398.02
10 mm aggregate cum 0.08 1144.65 91.57
(b) Labour 0.00
Mason (1st Class) day 0.10 670.00 67.00
Mazdoor (Unskilled) day 1.39 560.00 778.40
(c) Machinery
Concrete mixer 0.4/0.28 cum capacity hour 0.40 692.70 277.08
d) Formwork @ 4% on cost of material, labour and machinery 0.04
143.12
(a+b+c)
per 1 CUM 3721.22
Centering charges will be proposed 4% or 10% as per the condition
of Structure)
For Culvert Structure

Page 61 of 93
S.N
Description of item Unit Qty Rate Amount
o.
Reinforced cement concrete M25 grade (Design Mix) using 20 & 10mm metal mechanically mixed in
substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and
1204 MORD and 1500, 1700 & 2200 MORTH ,including overhead charges & Contractors profit but excluding VAT
upto 5m height.
R.C.C. grade M 25 (Design Mix)
Unit = cum
Height upto 5m
Case I : Using concrete Mixer
(a) Material
Cement t 0.403 4220.00 1700.66
Coarse sand cum 0.450 642.30 289.04
20 mm aggregate cum 0.540 1658.40 895.54
10 mm aggregate cum 0.360 1144.65 412.07
(b) Labour
Mason (1st Class) day 0.10 670.00 67.00
Mazdoor (Unskilled) day 1.39 560.00 778.40
(c) Machinery
Concrete mixer 0.4/0.28 cum capacity hour 0.40 692.70 277.08
4419.79
(d) Formwork @ 10% on (a+b+c) 10.00% 441.98
4861.77
Rate per cum = a+b+c+d+e+f 4861.77

Providing and laying cement concrete wearing course M 30 (Design Mix) grade using 20 & 10mm metal
mechanically mixed excluding reinforcement complete as per drawing and technical specifications Clauses 800 and
1206.3 MORD and 2702 MORTH ,including overhead charges and contractors profit but excluding cost of steel and
VAT.
Unit = cum
(a) Material
Cement t 0.407 4220.00 1717.54
Sand cum 0.45 642.30 289.04
20 mm aggregate cum 0.54 1658.40 895.54
10 mm aggregate cum 0.36 1144.65 412.07
(b) Labour
Mason (1st Class) day 0.10 670.00 67.00
Mazdoor (Unskilled) day 1.39 560.00 778.40
Mazdoor (Unskilled) for cleaning deck slab concrete surface day 0.15 560.00 84.00
c) Machinery
Concrete mixer 0.4/0.28 cum capacity hour 0.40 692.70 277.08
4520.67
(d) Formwork @ 3% of cost of concrete 3.00% 135.62
4656.29
Rate per cum = a+b+c+d+e+f 4656.29

Providing and Laying Reinforced Cement Concrete Pipe NP3 as

per design.
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material
including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and
masonry works in head wall and parapets. Tech Specification Clause 1106 MORD.
Unit = m
Taking output = 7.5 m
(3 pipes of 2.5 m length each)
1200 mm dia
a) Labour
Mason (1st Class) day 0.50 670.00 335.00
Mazdoor (Unskilled) day 3.14 560.00 1758.40
b) Material
Sand at site cum 0.05 642.30 32.12

Page 62 of 93
S.N
Description of item Unit Qty Rate Amount
o.
Cement at site t 0.07 4220.00 295.40
RCC pipe NP3 pipe at site m 7.50
RCC pipe NP3 collar at site Nos 2.00
Cost for 7.5 m = a+b+c+d
Rate per m = (a+b+c+d)/7.5

1000 mm dia
a) Labour
Mate day -
Mason (1st Class) day 0.25 670.00 167.50
Mazdoor (Unskilled) day 2.09 560.00 1170.40
Laying & fixing of Pipes with colors in position including lifting, rm
aligning etc.,
b) Material
Sand at site cum 0.04 642.30 25.69
Cement at site t 0.03 4220.00 126.60
RCC pipe NP3 pipe at site m 7.50
RCC pipe NP3 collar at site Nos 2.00
Cost for 7.5 m = a+b+c+d
Rate per m = (a+b+c+d)/7.5
750 mm dia
a) Labour
Mate day -
Mason (1st Class) day 0.15 670.00 100.50
Mazdoor (Unskilled) day 1.25 560.00 700.00
Laying & fixing of Pipes with colors in position including lifting, rm
aligning etc.,
b) Material
Sand at site cum 0.024 642.30 15.42
Cement at site t 0.018 4220.00 75.96
RCC pipe NP3 pipe at site m 7.50
RCC pipe NP3 collar at site Nos 2.00
Cost for 7.5 m = a+b+c+d
Rate per m = (a+b+c+d)/7.5
Note : The labour rate for 600 mm dia Hume pipe may be derived from the
rates for 750 dia by decreasing 20 per cent

Laying Cement Concrete Pipe NP3 on first class bedding of granular material including fixing collar with cement sand
mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry work in head wall and
parapet as per Tech Specification No. 1100 MORTH

Unit = m
Taking output = 7.5 m
(3 pipes of 2.5 m length each)
750 mm dia
a) Labour
Mate day -
Mason (1st Class) day 0.30 670.00 201.00
Mazdoor (Unskilled) day 2.51 560.00 1405.60
b) Material
Sand at site cum 0.04 642.30 25.69
Cement at site t 0.036 4220.00 151.92
RCC pipe NP3 pipe at site m 7.50
RCC pipe NP3 collar at site Nos 2.00
Cost for 7.5 m = a+b+c+d
Rate per m = (a+b+c+d)/7.5
Note : The labour rate for 300 mm dia shall be decreased by 20%

Page 63 of 93
S.N
Description of item Unit Qty Rate Amount
o.
Laying Cement Concrete Pipe NP3 on first class bedding of granular material including fixing collar with cement sand
mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry work in head wall and
parapet as per Tech Specification No. 1100 MORTH
Unit = m
Taking output = 7.5 m
(3 pipes of 2.5 m length each)
500 mm dia
a) Labour
Mate day -
Mason (1st Class) day 0.11 670.00 73.70
Mazdoor (Unskilled) day 0.94 560.00 526.40
b) Material 120.02
Sand at site cum 0.02 642.30 720.12
Cement at site t 0.01 4220.00 144.02
RCC pipe NP3 pipe at site m 7.50 576.10
RCC pipe NP3 collar at site Nos 2.00 76.81
c&d) Overheads & Contractors Profit
Cost for 7.5 m = a+b+c+d
Rate per m = (a+b+c+d)/7.5
Note : The labour rate for 300 mm dia shall be decreased by 20%

Page 64 of 93
 Data Sheet Water supply and sanitary items & Electrification for Buildings (2023-24)

S No Descitpion of item of Work per Quantiy Rate Amont

Water supply and sanitary items
Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap
1
of approved make including cost and conveyance of all materials and labour charges etc., complete
Unit Each.
water closet (BMW-D.13) Each 1.00 1979.00 1979.00
Rate per Each 1979.00
Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S"
2
trap: 580 mm x 440 mm of approved make including cost and conveyance of all materials and labour charges etc.,
complete
Unit Each.
water closet (BMW-D.04) Each 1.00 1551.00 1551.00
Rate per Each 1551.00
Supplying & Fixing low down porcelain flushing tank 10 Lit Capacitywith internal components of approved make including
3
cost and conveyance of all materials and labour charges etc complete
Unit Each.
10Lts flushing tank (BMW-D.11) Each 1.00 2468.00 2468.00
Rate per Each 2468.00
Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per
4 IS 2548-1996 of approved make including cost and conveyance of all materials and labour charges etc., complete
Unit Each.
Plastic seat (BMW-D.16) Each 1.00 850.00 850.00
Rate per Each 850.00
Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste
fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and
5 fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/
Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm
Unit 1 No.
wash basin (BMW-D.26) Nos 1.00 1519.00 1519.00
Rate per Each 1519.00
Supplying & Fixing 75 mm dia Single Socket PVC/SWR pipe - 4 Kg/sq.cm including cost and conveyance of all materials
6 and labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter
including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard
practice etc complete.
Unit Each - 1Rmt
75 mm pvc pipe (BMW-G.11) 3Rmt 3.00 78.67 236.00
labour charges (BMW-G.152) Rmt 3.00 79.00 237.00
Rate per Each Rate per 3.00 Rmt 473.00
Rate per 1 Rmt 158.00
Supplying & Fixing 110 mm dia Single Socket PVC/SWR pipe - 4 Kg/sq.cm including cost and conveyance of all materials
7 and labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc any diameter
including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard
practice etc complete.
Unit Each.- 1Rmt
110 mm pvc pipe BMW-G.13 3Rmt 3.00 149.00 447.00
labour charges (BMW-G.152) Rmt 3.00 79.00 237.00
Rate per Each Rate per 3 Rmt 684.00
Rate per 1 Rmt 228.00
Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced
8 in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC
compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)
Unit 1 Metre.
15.90mm Dia OD Pipe BMW-I.220 Rmt 1.00 59.00 59.00
Rate per 1.00 Rmt 59.00
22.20mm Dia OD Pipe -SDR13,50 Rmt 1.00 94.00 94.00
Rate per 1.00 Rmt 94.00
28.60mm Dia OD Pipe -SDR13,50 Rmt 1.00 136.00 136.00
Rate per 1.00 Rmt 136.00
34.90mm Dia OD Pipe -SDR13,50 Rmt 1.00 214.00 214.00
Rate per 1.00 Rmt 214.00

Page 65 of 93
 S No Descitpion of item of Work per Quantiy Rate Amont
Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank with Double layer approved brand &
9 manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes
but without fittings & base support for tanks
Unit Each - 1Ltr
water storage tank (BMW-G.01) 1 Ltr 1.00 8.50 8.50
Rate per Each Rate per 1 Ltr 8.50
10 Supply of Plastic storage tank lid with hinges including cost and conveyance of all materails and labour charges etc
complete.
Unit Each.
tank lid (BMW-G.03) Each 1.00 70.00 70.00
Rate per Each 70.00
11 Supply and Fixing of 12.7mm N.P bib tap Indian make including cost and conveyance of all materails and labour charges
etc complete.
Unit Each.
bib tap (BMW-E.07) Each 1.00 387.00 387.00
Rate per Each 387.00
Supply and Fixing of 12.7 mm brass stop cock Indian make heavy duty Ist quality including cost and conveyance of all
12
materials and labour charges etc complete
Unit 1 No.
stop cock (BMW-E.13) Nos 1.00 222.00 222.00
Rate per 1.00 No 222.00
13
Supplying & Fixing 12.7 mm PVC connection with brass union nut C.P coated including cost and conveyance of all
materials and labour charges etc complete
Unit 1 No.
PVC connection (BMW-I.48) Nos 1.00 95.00 95.00
Rate per 1.00 No 95.00
Supply and fixing of 25mm Gunmetal (GM) Ball valve with SS Ball and SS Spindle Indian make heavy type including cost
14
and conveyance of all materials and labour charges etc complete
Unit Each.
ball valve (BMW-F.59) Each 1.00 864.00 864.00
Rate per Each 864.00
15
Supplying & fixing Gunmetal (GM) Vertical Check (Non return) Valve as per IS-778 I-class heavy duty - 40 mm NB Size
including cost and conveyance of all materials and labour charges etc complete
Unit Each.
check valve (BMW-F.51) Each 1.00 1370.00 1370.00
Rate per Each 1370.00
Electrical Data

1.4.2
Supply and Fixing of 25mm dia 1.80/2.00mm thick PVC pipe (ISI MARK) concealed in wall with all required accessories including
masonary work and labour charges etc., complete.

Taking Output = 100 M

a) Material
MAT- 02676 25mm dia 2mm thick PVC pipe
100 M 100 36.00 3600.00

MAT 04226 U' Links 100 Nos 2 36.00 72.00

MAT 02700 25mm dia 1,2,3 & 4 way deep Junction Box Each 12 36.00 432.00
MAT 02705 25mm PVC bends Each 12 12.00 144.00
MAT 04287 Cement kg 50 10.00 500.00
b) Labour charges :
8h Skilled Electrician day 2 745.00 1490.00
52 i Semi skilled Electrician day 2 607.00 1214.00
Helpers day 2 605.00 1210.00
Mason Ist class day 2 670.00 1340.00

Page 66 of 93
 S No Descitpion of item of Work per Quantiy Rate Amont
Sundries
C) Cost for 100 RM 10002.00
Rate per Metre = C/100 100.02
(b) Supply and Fixing of 20mm dia 1.5mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories
including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour
charges etc., complete.
Taking Output = 100 M
a) Material
MAT 02675
20mm dia 1.5mm thick PVC pipe 100 M 100 26.00 2600.00
MAT 04226 U' Links 100 Nos 2 36.00 72.00
ELEC-1.4.1 e 10" x 8" Wooden deep box Each 3 61.00 183.00
MAT 02699 20mm dia 1,2,3 & 4 way deep Junction Box Each 12 32.00 384.00
MAT 02704 20mm PVC bends Each 12 9.00 108.00
MAT 04287 Cement kg 50 10.00 500.00
b) Labour charges :
Skilled Electrician day 2 745.00 1490.00
Semi skilled Electrician day 2 607.00 1214.00
Helpers day 2 605.00 1210.00
Mason Ist class day 2 670.00 1340.00
C) Cost for 100 RM 9101.00
Rate per Metre = C/100 91.01
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in
2.1.1 existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour
charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings
Taking Output = 6 Points
a) Material
MAT 02748 14/0.3mm PVC FR flexible copper wire 100 M 1 1238.00 1238.00
MAT 02833 6A Switch each 6
80.00 480.00
MAT 02818 6A 2 way Ceiling Rose@17/each S. No 214 each 6 22.00 132.00
MAT 02836 Modular covering plate 6 Modular each 1 122.00 122.00
b) Labour charges :
Skilled Electrician day 0.6 745.00 447.00
Semi skilled Electrician day 1.2 607.00 728.40
Helpers day 0.6 605.00 363.00
C) Cost for 6 Points 3510.40
Rate per Point = C/6 585.07
585.07
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in
2.1.1 existing pipe with 20A 1 Way 1 Module Modular Switch with Indicator, Ceiling rose and 3mm thick hylam sheet covering to
switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential
Buildings
Taking Output = 6 Points
a) Material
MAT 02748 14/0.3mm PVC FR flexible copper wire 100 M 1 1238.00 1238.00
MAT 02842 20A Switch each 6
117.00 702.00
MAT 02818 Ceiling Rose each 6 22.00 132.00
MAT 02836 Modular covering plate 6 Modular each 1 122.00 122.00
b) Labour charges :
Skilled Electrician day 0.6 745.00 447.00
Semi skilled Electrician day 1.2 607.00 728.40
Helpers day 0.6 605.00 363.00
C) Cost for 6 Points 3732.40
Rate per Point = C/6 622.07
622.07
Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity
2.1.4
including wire leads, earth connections along with all labour charges etc., complete.

Page 67 of 93
 S No Descitpion of item of Work per Quantiy Rate Amont
Taking Output = each
a) Material
MAT 02853 6A 3 pin / 2 pin Socket
each 1 94.00 94.00
MAT 02853 6A switch
each 1 61.00 61.00
b) Labour charges :
Skilled Electrician day 0.067 745.00 49.92
Helpers day 0.067 605.00 40.54
Rate per each 245.46
245.46
Supply and Fixing of 16A/20A 3pin and 6A 3pin plug socket and 16A switch control duly recessed in wall with metal deep
2.1.6
box of covered with modular covering plate including earth connections and all labour charges etc., complete.
Taking Output = each
a) Material
MAT 02713 supply of 6 modular box each 1.00 155.00 155.00
MAT 02853 6A Moduar plate each 1.00 132.00 132.00
MAT 02861 16A/6A 1 way Combi Socket each 1.00 138.00 138.00
b) Labour charges :
Skilled Electrician day 0.10 745.00 74.50
Semi Skilled Electrician day 0.10 607.00 60.70
Helpers day 0.10 605.00 60.50
Rate per each 620.70
620.70
3.1.2 Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth
continuity including all labour charges etc., complete.
Taking Output = 100 M
a) Material
MAT 02748 14/0.3mm FR PVC copper wire 100 M 1 1238.00 1238.00
b) Labour charges :
Skilled Electrician day 0.34 745.00 253.30
Semi Skilled Electrician day 1 607.00 607.00
Helpers day 0.34 605.00 205.70
Sundries
C) Cost for 100 RM 2304.00
Rate per Metre = C/100 23.04
23.04
3.1.1 Supply and run of 2 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth
continuity including all labour charges etc., complete.
Taking Output = 100 M
a) Material
MAT 02748 14/0.3mm FR PVC copper wire 100 M 2 1238.00 2476.00
b) Labour charges :
Skilled Electrician day 0.67 745.00 499.15
Semi Skilled Electrician day 2 607.00 1214.00
Helpers day 0.67 605.00 405.35
Sundries
C) Cost for 100 RM 4594.50
Rate per Metre = C/100 45.95
45.95
Note : Labour Charges considered for 150 M / day
3.1.4 Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains
inlcuding all labour charges etc., complete.
Taking Output = 100 M
a) Material

Page 68 of 93
 S No Descitpion of item of Work per Quantiy Rate Amont
MAT 02750 36/0.3mm (2.5 sqmm) FR PVC copper wire 100 M 2 2874.00 5748.00
b) Labour charges :
Skilled Electrician day 0.67 745.00 499.15
Semi Skilled Electrician day 2 607.00 1214.00
Helpers day 0.67 605.00 405.35
Sundries
C) Cost for 100 RM 7866.50
Rate per Metre = C/100 78.67
78.67
3.1.5 Supply and run of 2 of 56/0.3mm (4 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding
all labour charges etc., complete.
Taking Output = 100 M
a) Material

MAT02751 56/0.3mm (4 sqmm) FR PVC copper wire 100 M 2 4388.00 8776.00

b) Labour charges :
Skilled Electrician day 1.0 745.00 745.00
Semi Skilled Electrician day 3.0 607.00 1821.00
Helpers day 1.0 605.00 605.00
Sundries
C) Cost for 100 RM 11947.00
Rate per Metre = C/100 119.47
119.47
Supply of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard
9.7.2 accessories.

a) Material
MAT 03600
Ceiling Fan of 48" (1200mm) No 1 2766.00 2766.00
MAT 02787 23/0060 Twin Core wire M 1 11.20 11.20
Transportation charges on unit cost 1% 2766.00 27.66
9.7.35 b) Labour charges.
Skilled Electrician day 0.125 745.00 93.13
Helper day 0.125 605.00 75.63
Rate per Each 2973.62
2973.62
9.7.26 Supply and erecting step type Modular regulator for ceiling fans 1200mm sweep complete erected on existing board.

MAT 02817 Step type Regulator No 1 208.00 208.00

Semi skilled Electrician day 0.1 607.00 60.70

Total Rate 1 No 268.70

Supply and fixing of 18W/20W, 1200mm length LED batten light with extruded alluminium housing and polycarbonate
cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover
CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. Makes: Wipro / Phillips /Lighting Technologies(LT) / GEVenture /
Crompton / Bajaj / VIN /Halonix/Jaquar/HPL/Havells/GM b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /
SAMSUNG.
ELEC-3.8.13 as per ssr Nos 1 662.00 662.00
Total Rate 1 No 662.00
Supply, Transportation and fixing of 15 W LED Slim Panel Round /Square suitable for Recessed / Surface mounting made
of diecast alluminium body with powder coating, acrylic diffuser with Driver, operating voltage range of 150 to 265 Volts
AC, P.F > 0.9, Surge protection: 2KV,THD<10%, with high power LED's having efficacy of > 120 lumins/watt,CCT: 3000K -
5700K, minimum CRI>70, .etc., complete a) LUMINAIRE MAKE : Phillips / GE / Crompton / Wipro / Bajaj / Havells / VIN /
Renesola b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG.

MAT 03319 15W each 1.00 877.00 877.00

Fixing of mirror optic tube light luminaire in false ceiling / pop with necessary arrangment including giving connections and
7.9.7
all labour charges etc., complete.
a) Material

Page 69 of 93
 S No Descitpion of item of Work per Quantiy Rate Amont
MAT 03319 28/0060 twin core flexible copper cable M 1.00 11.20 11.20
Aluminium flat (as per requirment) LS
b) Labour charges for cutting P.O.P / false ceiling and Fixing
MOT
Skilled Electrician day 0.125 745.00 93.13
Carpenter day 0.125 750.00 93.75
Semi skilled Electrician / Helper day 0.125 605.00 75.63
273.71
Rate per each 1150.71
Supply and fixing TPN Distribution board with IP-20 protection (Metal Door) suitable for single phase ELCB / RCCB / FP
Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface /
flush mounting etc., complete.
40A FP Isolator - 1 No for incomer, 10kA-6-32A SP MCBs - 4 Nos for outgoing.
Taking Output = each
a) Material
MAT 03073 40-63A DP MCB each 1.00 1100.00 1100.00
MAT 03095 40A D.P.Isolator / ECCB / RCCB each 1.00 432.00 432.00
MAT 03070 10kA - 6-32A range SP MCBs each 4.00 228.00 912.00
b) Labour charges :
Skilled Electrician day 0.50 745.00 372.50
Semi Skilled Electrician day 0.50 607.00 303.50
Helpers day 1.00 605.00 605.00
Sundries such as TW Plugs, Screws Cement etc, LS
Rate per each 3725.00
Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all
2.1.7
labour charges with 18W pin type CFL Lamp (for new installation).
MAT 02830 PVC batten holder 1.7.25 each 1 23.00 23.00
MAT 03282 18W pin type CFL lamp each 1 105.00 105.00
Skilled Electrician day 0.05 745.00 37.25
Helpers day 0.05 605.00 30.25
Rate per each 195.50
Total Rate 1 No 195.50
Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in
the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring
5.1.1
duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all
labour charges etc., complete for small quarters.
a) Material
MAT 04294 Earth Work Excavation of Hard gravel Soil with small
boulder for trench 1st step of size 1.5 x 0.6 x 0.9 m cum 0.85 303.00 257.55
(5'x2'x3')
Excavation of Hard disteggrated rocks and boulders for
cum 0.90 303.00 272.70
MAT04294 trench 2nd Step of size 1.2 x 0.6 x 1.2 m (4'x2'x4')
25% extra for narrow trench & pit and back filling with Sand, Coke, Salt etc., and leveling 132.56
MAT 04292 40mm dia 'B' Class G.I pipe. Mtr 2.5 425.00 1062.50
25 x 6 mm (1"X 1/4") G.I Flat duly drilled 12mm holes (4
MAT 04151 Each 1 97.00 97.00
Nos) of 200 mm (8") length
MAT 04295 Drilling of 16 Nos through holes of 12mm dia to G.I pipe Each 16 8.00 128.00
MAT 04295 G.I Nuts, Bolts an Washers Set 4 14.00 56.00
MAT 04295 18"(450mm) dia hume pipe ring., Each 1 303.00 303.00
MAT 04232
Hard Coke., Kg 20 24.00 480.00
MAT 04233 Salt. Kg 10 19.00 190.00
b) labour charges for fixing pipe ring and connections
Semi skilled Electrician Nos 0.50 607.00 303.50
Helpers Nos 0.50 605.00 302.50
Rate per each 3585.31

Page 70 of 93
 S No Descitpion of item of Work per Quantiy Rate Amont
Supply and Run of 4 of 16 Sq.mm WPSC Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with
6.1.6 all accessories including labour charges etc., complete for service mains.
a) Material
MAT 02791 16 Sq.mm WPSC Aluminium cable 100 M 4.00 3300.00 13200.00
MAT 04271 No.10 SWG GI Wire (6.7kg x 2) Length 200 RM
kg 13.40 85.00 1139.00
MAT 04236 Binding wire kg 0.25 73.00 18.25
MAT 04235 PVC Cleats / Separters 4 Way 100 Nos 1.00 520.00 520.00
b) labour charges
Skilled Electrician day 2.00 745.00 1490.00
Semi skilled day 2.00 607.00 1214.00
Helper day 2.00 605.00 1210.00
Sundries such as insulation tapes and rounding off
C) Cost for 100 M 18791.25
Rate per mtr c/100 187.91
187.91
Supply and Transportation of 1 HP Single phase ISI Mono block CI body motor pumpset (25x25mm). Makes:
11.1.1
Kirloskar / Crompton / Texmo / CRI / KSB/Lubi / Havells Hi-flow V2 as per SSR
MAT 03700 1 HP single phase mortor Each 1.00 8652.00 8652.00
b) labour charges
Skilled Electrician day 0.50 745.00 372.50
Helper day 1.00 607.00 607.00
plumber day 0.50 605.00 302.50
Rate per Each 9934.00
Supply and fixing of three phase energy meter, 240 V AC, 50 HZ as per IS13010 with 2.5-5 / 5-10/10-20 Amps range wth
14.2.9
200% over load capacity complete with connection etc., complete on the existing board.
MAT 03992 meter each 1 3,080.00 3,080.00
Skilled Electrician day 0.33 745.00 245.85
Total Rate 1 No 3325.85

Page 71 of 93
 RCC HUME PLAIN ENDED PIPES RATES 2019-20

Rate upto 5 Kms

Rate for every
Lead including
additional 1 KM
S.No Material Initial cost per Loading,
lead or part
unloading and
thereof.
stacking

For RCC Hume Pipes

300 mm dia NP3 class 844.00 1Rm 49.45 1.36

450 mm dia NP3 Class 1258.00 1Rm 68.47 2.36

600 mm dia NP3 Class 2068.00 1Rm 112.84 5.24

800 mm dia NP3 class 3405.00 1Rm 150.88 6.08

900 mm dia NP3 class 4284.00 1Rm 197.79 11.48

1000mm dia NP3 Class 5227.00 1Rm 238.36 11.48

1200 mm dia NP3 class 7427.00 1Rm 289.08 12.49

300 mm dia NP2 class 355.00 1Rm 17.76 0.68

450 mm dia NP2Class 626.00 1Rm 36.77 2.02

600 mm dia NP2 Class 1013.00 1Rm 57.05 3.71

800 mm dia NP2 class 1592.00 1Rm 84.95 5.24

900 mm dia NP2 class 2019.00 1Rm 97.62 5.24

1000mm dia NP2Class 2896.00 1Rm 144.54 10.8

1200 mm dia NP2 class 3454.00 1Rm 180.04 11.48

For RCC Collers

300 mm dia NP3 class 128.00 1No

450 mm dia NP3 Class 247.00 1No

600 mm dia NP3 Class 385.00 1No

800 mm dia NP3 class 661.00 1No

900 mm dia NP3 class 770.00 1No

1000mm dia NP3 Class 961.00 1No

1200 mm dia NP3 class 1528.00 1No

300 mm dia NP2 class 90.00 1No

450 mm dia NP2Class 195.00 1No

600 mm dia NP2 Class 301.00 1No

800 mm dia NP2 class 554.00 1No

900 mm dia NP2 class 663.00 1No

1000mm dia NP2Class 774.00 1No

1200 mm dia NP2 class 1150.00 1No

DATA

Labour Charges towards Wroght & Put up

Unit: 1 Cum
Labour Unit Qty Rate Amount
Carpenter day 17.70 750.00 13275.00
Man Mazdoor day 8.80 560.00 4928.00
Wthout MA 18203.00
With 20% MA 21843.60
With 25% MA 22753.75
Labour Charges for Wroght & Put up
1Sqm 1228.00
(BMM.V.3.8) Sl.No.968

Door Data for size of 1.22 x 2.13 mSAL Wood

Frames Cum 0.0473 53275.00 2519.91
Shutters Cum 0.0756 66549.00 5031.10
Total/ Labour Cum 0.1229 21843.60 2684.58
Total 10235.59
Door Accessories
Top Tower bolts (Ave : 200mmSize) Nos 2 56.00 112.00
Bottom Tower bolts 150mm long Nos 2 38.00 76.00
MS hold fasts 300mm long ISA 40x40x5 Nos
6 35.00 210.00
Butt hinges MS 125/150mm-34/44 Nos 6 34.00 204.00
MS Aldrop with bolts 200/250/300mm - Nos
115/151/181 2 151.00 302.00
Door handle MS 150mm long Nos 4 50.00 200.00
Door stoppers MS Nos 2 50.00 100.00
(Same for all doors) 1204.00
MS Aldrop 300 mm Nos 1 181.00 181.00
Wood Primer Ltr 1 0.00
Door of size in mts 1.05 x 2.10 8685.24
Door of size in mts 0.90 x 2.10 7444.50

Window Data for size of 0.91 x 1.22mSAL Wood

Frames Cum 0.0266 53275.00 1417.12

Shutters Cum 0.0289 66549.00 1923.27
Total/ Labour Cum 0.0555 21843.60 1212.32
Total 4552.70
Window Accessories
MS hold fasts 300mm long ISA 40x40x5 Nos
4 35.00 140.00
MS tower bolt 100mm long Nos 4 26.00 104.00
Butt hinges MS 75 mm size Nos 4 12.00 48.00
MS Handles 125/150mm-34/50 Nos 2 50.00 100.00
Flat latches 250/300mm - 58/73 Nos 3 58.00 174.00
Same for all such windows 566.00
Friction Stay hinges for windows (BMT G.71) 1 107.00

Window of size in mts 1.22 x 1.35 6754.01

OBSERVED DATA FOR PUSHKARAM 2015 Name Board : (With MA 20%)

144 Supply and fixing of MS name board of size 4feet X No. 1 Rate to be
3feet size including painting and required lettering as fed by the
per standard specifications EE
Concerned
Unit 1 No
A) Matereial Requirement
Iron section
Outer Frame MS Pipe of 32mm dia total 14+14' = 8.53m Rm 8.53 185.00 1578.86

MS Sheet of 3mm thick (23.55 Kg/sqm) KGs 27.08 45.00 1218.71

Labour charges for fabrication of grills KGs 27.08 22.00 595.81

Painting with enmail paint over primary coat 1Sqm 1.00 124.00 124.00

Painting letters of 5CM size 59+ 23Nos 1Cm 410.00 1.60 656.00

Painting letters of 3CM size 60 Nos 1Cm 180.00 1.60 288.00

Add MA 20% on labour 332.76

Labour charges for excavation of pit size 0.30 x 0.30 x 200.00

0.90m, laying of PCC(1:4:8) of 0.30 x 0.30 x 0.30m for fixing
of poles

Grand Total 4994.15

OBSERVED DATA FOR PUSHKARAM 2015 Name Board : (Without MA)

144 Supply and fixing of MS name board of size 4feet X No. 1 Rate to be
3feet size including painting and required lettering as fed by the
per standard specifications EE
Concerned
Unit 1 No
A) Matereial Requirement
Iron section
Outer Frame MS Pipe of 32mm dia total 14+14' = 8.53m Rm 8.53 185.00 1578.86

MS Sheet of 3mm thick (23.55 Kg/sqm) KGs 27.08 45.00 1218.71

Labour charges for fabrication of grills KGs 27.08 22.00 595.81
Painting with enmail paint over primary coat 1Sqm 1.00 124.00 124.00
Painting letters of 5CM size 59+ 23Nos 1Cm 410.00 1.60 656.00
Painting letters of 3CM size 60 Nos 1Cm 180.00 1.60 288.00
Add MA 20% on labour 0.00
Labour charges for excavation of pit size 0.30 x 0.30 x 200.00
0.90m, laying of PCC(1:4:8) of 0.30 x 0.30 x 0.30m for fixing
of poles
Grand Total 4661.39
Seignorage Statement
S. Qty in
Desc Qty Metal Sand Bricks
No Cum
20mm Cum Nos
1 Piles 14 Nos 7.108 6.40 3.20 0.00

2 Sand filling in basement 62.10 62.10 62.10 0.00

3 PCC (1:5:10) 4.91 4.91 4.42 2.21 0.00

4 RCC M20 for Columns, Plinth, Lintel, Roof 11.08 11.08 9.97 4.99 0.00
beams

5 RCC M20 Sunshade 0.75/0.50m th 0.60m 15.13 0.95 0.85 0.43 0.00
wide

6 RCC M20 Roof Slab 110mm thick 76.42 8.41 7.57 3.78 0.00

7 Impervious coat 12mm thick in CM (1:3) 76.42 1.15 1.20 0.00

8 Brick Masonry in CM (1:6) & (1:8) 25.90 5.18 5.44 13261.00

9 Ceiling palatering in CM(1:3), 12mm thick 49.14 0.74 0.77 0.00

Total 29.20 84.12 13261.00

Rate 50.00 40.00 38.50
Amount 1460.24 3364.76 510.55 5335.55
or 5336.00
 INITIAL RATES 2023-24

Machinary Labour Paints

S.no Item SSR Code No Rate Rs. Unit S.no Item Rate Rs. Unit S.no Item Rate Rs.

1 Concrete Mixer 0.28 Cum. HIR-00018 692.70 1 Hour 1 Mason 1st Class LAB-00011 670.00 day 1 White Cement BMS-W.68 31.00
2 Needle Vibrator 40mm 274.40 1 Hour 2 Carpenter 1st Class 750.00 day 2 Water proof cement BMT-J.23 54.00
HIR00040 LAB-00004 paint
3 Vibratory roller 8 tonne HIR--00062 3499.60 1 Hour 3 Painter 1st Class 750.00 day 3 Cement Primer BMT-J.01 173.00
LAB-00035
4 Smooth wheeled roller 8tonne HIR-00050 1743.60 1 Hour 4 Mason 2nd Class LAB-00091 605.00 day 4 Wood Primer BMT-J.05 176.00
5 Water tanker 6 Kilolitre HIR-00076 822.00 1 Hour 5 Carpenter 2nd Class LAB-00060 605.00 day 5 Red Oxide BMT-J.03 160.00
6 Tractor with Grader HIR-00077 531.00 1 Hour 6 Painter 2nd Class LAB-00093 605.00 day 6 White Lead BMT-J.08 121.00
7 Tractor with rotavator HIR-00078 543.00 1 Hour 7 Black smith 630.00 day 7 Synthetic Enamel Paint BMT-J.30 191.00
LAB-00002
8 Tipper 5.5Cum capacity 1242.70 1Hour 8 Electrician Skilled 745.00 day 8 Plastic Emulsion paint - BMT-J.24 201.00
Ext
HIR-00054 LAB-00005
9 Bitumen boiler HIR-00094 261.00 1Hour 9 Mazdoor (Unskilled) 560.00 day 9 Oil Bound Distember BMT-J.21 85.00
LAB-00120
10 Dozer( D 80 ) HIR-00008 3050.60 1 Hour 10 Semi skilled Electrician 607.00 day 10 Dry Powder Distemper BMT-J.20 46.00
LAB-00079
11 Dozer( D 50 ) HIR-00072 1907.00 1 Hour 11 Helper Electrical 605.00 day 11 Synthatic Plaster Putty
LAB-00079 BMT-J.31 30.30
12 Tractor with ripper HIR-00079 543.00 1 Hour 12 1040.00 day JUNGLE
attachment Diploma Engineer / Surveyor LAB-00127
13 Hydralic Broom HIR-00081 455.00 1Hour 13 Brick layer 670.00 day 1 Cleraing heavy Jungle MAT-00479 3.20
LAB-00011
14 Air Compressor HIR-00002 633.00 1Hour 14 Operator Lathe/Drilling/Shearing 735.00 day 2 Clering Light jungle MAT-00480 2.80
machine LAB-00025
15 Bitumen pressure distributer HIR-00082 1907.00 1Hour 15 Power Saw Cutter - Hand Operated - 132.00 day Water
Hire charges BMC-X.02
16 Emulsion pressure distributer HIR-00083 1073.00 1Hour 16 Power Drill - Hand Operated - Hire 121.00 day 1 Rural water rate 99.00
Charges BMC-X.03 MAT-00540
17 Front end loader HIR-00074 2023.00 1Hour Materials
18 Motor grader HIR-00073 3796.00 1Hour GYP BOARD CEILING MATERIALS
19 Hydrallic exacavator HIR-00052 3561.50 1Hour S.no Item 1219 mm x 1829 mm size 285.00
BMT-M.01
Boards
20 Wet Mix Plant 60TPH HIR-00080 1984.00 1Hour WOOD WORK Ceiling Angle 25 mm x 10 mm
x 0.55 mm
21 Generator 30 KVA HIR-00023 1356.90 1Hour 1 Medium Teakwood Scantlings (2-3m) BMT-E.02 96183.50 1 Cum BMT-M.04 80.00
22 Plate compacter HIR-00115 70.00 1 Hour 2 Medium Teakwood Planks BMT-E.04 168193.00 1 Cum Connecting Clips BMT-M.17 11.00
23 125 micron Polythene sheet MAT-00539 15.25 1Sqm 3 Country wood Scantlings BMT-E.15 53275.00 1 Cum Ceiling Section 51.5 mm x
26 mm x 10.5 mm x 0.55
24 M-120 70.00 1 Kg 4 Country wood Planks BMT-E.16 66549.00 1 Cum mm thick BMT-M.05 110.00
Joint Sealant Compound
25 Water tanker 8 Kilolitre HIR-00064 1207.60 1 Hour OTHER RATES Intermediate Channel 45 mmx
15 mm x 15 mm x 0.9 mm
26 3264.00 1 Hour 1 Supply and fixing of false ceiling POP BMT-M.51 441.00 1 Sqm 81.00
Hydraulic Chip Spreader HIR-00090 BMT-M.06
board 12 mm TH
27 Hot mix Plant – 40 to 60 TPH 23965.00 1 Hour 2 Supply and fixing of false ceiling POP BMT-M.52 368.00 1 Sqm Perimeter Channel 20 mm x
27 mm x 30 mm(web) of 0.55
capacity HIR-00087 board 10 mm TH mm thick
28 Paver Finisher Hydrostatic with 3891.00 1 Hour 3 A.C.Sheets Corrugated 6mm BMT-E.17 237.50 1 Sqm 72.00
sensor control 100 TPH HIR-00088 BMT-M.07
29 Generator 125 KVA HIR-00111 1836.00 1 Hour 4 G.I.Sheets Plain / Corrugated BMT-E.20 73.50 1 Kg Rawl Plug BMT-M.18 4.00
30 Generator 250 KVA HIR-00110 2572.00 1 Hour 5 Water Proof Compound BMT-H.93 111.00 1 Kg Soffit Cleats BMT-M.20 4.00
31 Tandem Road roller HIR-00091 2208.00 1 Hour 6 Cement Jali- 25 mm Thick BMS-W.15 218.00 1 Sqm Drywall Screws - 25 mm BMT-M.21 5.00
S.no Item SSR Code No Rate Rs. Unit S.no Item Rate Rs. Unit S.no Item Rate Rs.

32 261.00 1 Hour 7 Cement Jali- 40 mm Thick BMS-W.16 283.00 1 Sqm Jointing Compound
BMT-M.22 33.00
Bitumen boiler oil fired HIR-00094
33 Plasticizer MAT-05375 83.00 1 Kg 8 Cement Jali- 50 mm Thick BMS-W.17 388.00 1 Sqm Jointing Paper Tape BMT-M.23 6.24
34 Epoxy compound with accessories for 362.00 1 Kg 9 Binding wire MAT-00003 70.00 1 Kg. Drywall Top Coat BMT-M.24 156.00
preparing epoxy mortar MAT00254
35 Bitumenous sealant MAT-00275 70.00 1 Kg 10 Rabbit wire(Chicken mesh) BMT-F.28 22.00 1Sqm
11 GALVANISED PROFILE SHEET BMS-W.45 836.00 1Sqm
12 ROOFING
Labour for Fabricating Grills BMM-V.14 33.00 1 Kg
13 Labour for Fixing Grills BMM-V.15 6.00 1 Kg

14 MILD STEEL PIPE BMT-F.04 84.00 1kG

15 STAINLESS STEEL PIPE BMT-F.06 445.00 1kG
Labour charges for Stainless Steel 1kG
Railing works BMM-V.18 159.00
16 Labour charges for Doors & Windows BMM-V.38 1871.00 1Sqm
including all accessories
17 Anti Corrsion Rate BMT-H. 66 1234.20 1Sqm
Unit

1 Kg
1 Kg

1 Kg

1 Ltr.
1 Ltr.
1 Kg
1 Ltr.

1 Ltr.

1Kg

1Kg

1Kg

1Sqm

1Sqm
Unit
 Centering Charges
GROUND FLOOR FIRST FLOOR SECOND FLOOR
S.no Item Hire Labour Total Unit Hire Labour Total Unit Hire Labour Total Unit
1 Footings 301.00 672.00 973.00 1 Cum
2 Bed blocks 67.00 363.00 430.00 1 Cum
3 Pedastels 343.00 1069.00 1412.00 1 Cum
4 Plinth Beams 1453.00 1620.00 3073.00 1 Cum
HIRE CHARGES FOR CENTERING & SCAFFOLDING - Unsupported
Height upto 3.66 M Steel scaffolding pipes, jack Props, wallers, Foot
plates, brackets, steel Centering Plates,etc.

5 Lintels 1233.00 1720.00 2953.00 1 Cum 1233.00 1892.00 3125.00 1 Cum 1233.00 2064.00 3297.00 1 Cum
6 Sunshades & Chajjas 243.00 264.00 507.00 1 Sqm. 243.00 290.00 533.00 1 Sqm. 243.00 317.00 560.00 1 Sqm.
7 Columns 371.00 2415.00 2786.00 1 Cum 371.00 2657.00 3028.00 1 Cum 371.00 2898.00 3269.00 1 Cum
8 Beams 2179.00 2027.00 4206.00 1 Cum 2179.00 2230.00 4409.00 1 Cum 2179.00 2432.00 4611.00 1 Cum
9 Slabs-upto 150mm thick 247.00 241.00 488.00 1 Sqm. 247.00 265.00 512.00 1 Sqm. 247.00 289.00 536.00 1 Sqm.
10 Slabs150-300mm thick 254.00 248.00 502.00 1 Sqm. 254.00 273.00 527.00 1 Sqm. 254.00 298.00 552.00 1 Sqm.
11 Slabs 300mm above 265.00 260.00 525.00 1 Sqm. 265.00 286.00 551.00 1 Sqm. 265.00 312.00 577.00 1 Sqm.
HIRE CHARGES FOR CENTERING & SCAFFOLDING - Unsupported
Height upto 3.66 M Casurina Ballies, Bamboos, Wooden Reapers,
Runners, Wood Posts, Wall Plates etc.

12 Lintels 826.00 1332.00 2158.00 1 Cum 826.00 1465.00 2291.00 1 Cum 826.00 1598.00 2424.00 1 Cum
13 Sunshades & Chajjas 163.00 204.00 367.00 1 Sqm. 163.00 224.00 387.00 1 Sqm. 163.00 245.00 408.00 1 Sqm.
14 Columns 249.00 1871.00 2120.00 1 Cum 249.00 2058.00 2307.00 1 Cum 249.00 2245.00 2494.00 1 Cum
15 Beams 1458.00 1569.00 3027.00 1 Cum 1458.00 1726.00 3184.00 1 Cum 1458.00 1883.00 3341.00 1 Cum
16 Slabs-upto 150mm thick 165.00 186.00 351.00 1 Sqm. 165.00 205.00 370.00 1 Sqm. 165.00 223.00 388.00 1 Sqm.
17 Slabs150-300mm thick 170.00 193.00 363.00 1 Sqm. 170.00 212.00 382.00 1 Sqm. 170.00 193.00 363.00 1 Sqm.
18 Slabs 300mm above 178.00 201.00 379.00 1 Sqm. 178.00 212.00 390.00 1 Sqm. 178.00 232.00 410.00 1 Sqm.

19 Scaffolding for Brick work for 10.78 84.62 95.4 1 Sqm. 10.78 121.18 131.96 1 Sqm. 10.78 157.72 168.5 1 Sqm.
20 Scaffolding for Plastering 1.08 8.47 9.55 1 Sqm. 1.08 12.12 13.2 1 Sqm. 1.08 15.77 16.85 1 Sqm.
21 Scaffolding for Ceiling Plastering 2.57 16.94 19.51 1 Sqm. 2.57 24.04 26.61 1 Sqm. 2.57 31.13 33.7 1 Sqm.

VITRIFIED TILES
1 soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm BMT-C.06 425.00 1 Sqm
2 Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 1 Sqm
600 mm BMT-C.07 462.00
3 Double charged / multi charged stain free full body porcelain vitrified tiles with double
layer pigment of Size 600 x 600 mm BMT-C.09 625.00 1 Sqm
4 Double charged / multicharged stain free full body porcelain vitrified tiles with double layer
pigment BMT-C.10 770.00 1 Sqm
5 digital / polished glazed full body porcelain vitrified tiles with any type of design texture
such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and
Size 800 x 800 mm BMT-C.12 770.00 1 Sqm
6 glazed vitrified tiles with matt finish of size 600 x600mm BMT C.13(a) 825.00 1 Sqm
CERMIC TILES
1 Non-skid red or white full body Ceramic floor tiles of Size 300 mm x 300 BMT-C.01 396.40 1 Sqm
2 Non-skid red or white full body Ceramic floor tiles of Size 450 mm x 450 BMT-C.02 390.00 1 Sqm
3 Non-skid red or white full body Ceramic floor tiles of Size 600 mm x 600 BMT-C.03 520.00 1 Sqm
4 Non-skid red or white full body Ceramic floor tiles of Scratch free-stain free and scratch
free-nano finish of Size 600 mm x 600 mm BMT-C.04 530.00 1 Sqm
5 GLAZED TILES
6 scratch less, stain free and thickness between 6-8 mm BMT-C.26 605.00 1 Sqm
7 Polished Marble Tiles
8 Polished Marble Tiles of 8 - 10 mm thickness of all sizes and varieties BMT-B.15 510.00 1 Sqm
 Conveyance 2023-24
Sand Metal Bricks
Lead excluding excluding excluding
OH OH OH

1 37.30 35.90 59.80

2 52.20 50.20 83.70
3 69.60 67.00 111.60
4 84.50 81.30 135.60
5 99.40 95.70 159.50
6 114.30 110.10 183.40
7 129.20 124.50 207.30
8 144.10 138.90 231.20
9 159.00 153.30 255.10
10 173.90 167.70 279.00
11 188.80 182.10 302.90
12 203.70 196.50 326.80
13 218.60 210.90 350.70
14 233.50 225.30 374.60
15 248.40 239.70 398.50
16 263.30 254.10 422.40
17 278.20 268.50 446.30
18 293.10 282.90 470.20
19 308.00 297.30 494.10
20 322.90 311.70 518.00
21 337.80 326.10 541.90
22 352.70 340.50 565.80
23 367.60 354.90 589.70
24 382.50 369.30 613.60
25 397.40 383.70 637.50
26 412.30 398.10 661.40
27 427.20 412.50 685.30
28 442.10 426.90 709.20
29 457.00 441.30 733.10
30 471.90 455.70 757.00
31 484.30 467.70 776.90
32 496.70 479.70 796.80
33 509.10 491.70 816.70
34 521.50 503.70 836.60
35 533.90 515.70 856.50
36 546.30 527.70 876.40
37 558.70 539.70 896.30
38 571.10 551.70 916.20
39 583.50 563.70 936.10
40 595.90 575.70 956.00
41 608.30 587.70 975.90
42 620.70 599.70 995.80
43 633.10 611.70 1015.70
44 645.50 623.70 1035.60

Page 82 of 93
 Sand Metal Bricks
Lead excluding excluding excluding
OH OH OH

45 657.90 635.70 1055.50

46 670.30 647.70 1075.40
47 682.70 659.70 1095.30
48 695.10 671.70 1115.20
49 707.50 683.70 1135.10
50 719.90 695.70 1155.00
51 732.30 707.70 1174.90
52 744.70 719.70 1194.80
53 757.10 731.70 1214.70
54 769.50 743.70 1234.60
55 781.90 755.70 1254.50
56 794.30 767.70 1274.40
57 806.70 779.70 1294.30
58 819.10 791.70 1314.20
59 831.50 803.70 1334.10
60 843.90 815.70 1354.00
61 856.30 827.70 1373.90
62 868.70 839.70 1393.80
63 881.10 851.70 1413.70
64 893.50 863.70 1433.60
65 905.90 875.70 1453.50
66 918.30 887.70 1473.40
67 930.70 899.70 1493.30
68 943.10 911.70 1513.20
69 955.50 923.70 1533.10
70 967.90 935.70 1553.00
71 980.30 947.70 1572.90
72 992.70 959.70 1592.80
73 1005.10 971.70 1612.70
74 1017.50 983.70 1632.60
75 1029.90 995.70 1652.50
76 1042.30 1007.70 1672.40
77 1054.70 1019.70 1692.30
78 1067.10 1031.70 1712.20
79 1079.50 1043.70 1732.10
80 1091.90 1055.70 1752.00
81 1104.30 1067.70 1771.90
82 1116.70 1079.70 1791.80
83 1129.10 1091.70 1811.70
84 1141.50 1103.70 1831.60
85 1153.90 1115.70 1851.50
86 1166.30 1127.70 1871.40
87 1178.70 1139.70 1891.30
88 1191.10 1151.70 1911.20
89 1203.50 1163.70 1931.10
90 1215.90 1175.70 1951.00

Page 83 of 93
 Sand Metal Bricks
Lead excluding excluding excluding
OH OH OH

91 1228.30 1187.70 1970.90

92 1240.70 1199.70 1990.80
93 1253.10 1211.70 2010.70
94 1265.50 1223.70 2030.60
95 1277.90 1235.70 2050.50
96 1290.30 1247.70 2070.40
97 1302.70 1259.70 2090.30
98 1315.10 1271.70 2110.20
99 1327.50 1283.70 2130.10
100 1339.90 1295.70 2150.00
101 1352.30 1307.70 2169.90
102 1364.70 1319.70 2189.80
103 1377.10 1331.70 2209.70
104 1389.50 1343.70 2229.60
105 1401.90 1355.70 2249.50
106 1414.30 1367.70 2269.40
107 1426.70 1379.70 2289.30
108 1439.10 1391.70 2309.20
109 1451.50 1403.70 2329.10
110 1463.90 1415.70 2349.00
111 1476.30 1427.70 2368.90
112 1488.70 1439.70 2388.80
113 1501.10 1451.70 2408.70
114 1513.50 1463.70 2428.60
115 1525.90 1475.70 2448.50
116 1538.30 1487.70 2468.40
117 1550.70 1499.70 2488.30
118 1563.10 1511.70 2508.20
119 1575.50 1523.70 2528.10
120 1587.90 1535.70 2548.00
121 1600.30 1547.70 2567.90
122 1612.70 1559.70 2587.80

Page 84 of 93
 Labour Days =
S. No. Description Depth Qty Labour Hours
hrs/8
1 DUR Piles 375 mm dia 3.50 0.760 51.04 6.380
DUR Piles 375 mm dia 3.75 0.787 53.00 6.625
DUR Piles 375 mm dia 3.80 0.793 53.40 6.675
DUR Piles 375 mm dia 4.65 0.886 59.00 7.375

DUR Piles 300 mm dia 3.50 0.438 39.00 4.875

DUR Piles 300 mm dia 3.75 0.456 40.50 5.063
DUR Piles 300 mm dia 3.80 0.460 40.80 5.100

SUR Piles 300 mm dia 3.50 0.343 30.00 3.750

SUR Piles 300 mm dia 3.75 0.380 31.50 3.938
SUR Piles 300 mm dia 3.80 0.364 31.80 3.975

DUR Piles 250 mm dia 3.50 0.282 33.00 4.125

DUR Piles 250 mm dia 3.75 0.295 34.25 4.281
DUR Piles 250 mm dia 3.80 0.297 34.50 4.313
DUR Piles 250 mm dia 3.90 0.258 33.00 4.125

SUR Piles 250 mm dia 3.50 0.227 25.50 3.188

SUR Piles 250 mm dia 3.75 0.239 26.25 3.281
SUR Piles 250 mm dia 3.80 0.242 27.00 3.375

DUR Piles 200 mm dia 3.50 0.167 27.00 3.375

DUR Piles 200 mm dia 3.75 0.174 28.00 3.500
DUR Piles 200 mm dia 3.80 0.176 28.20 3.525

SUR Piles 200 mm dia 3.50 0.138 21.00 2.625

SUR Piles 200 mm dia 3.75 0.146 22.00 2.750
SUR Piles 200 mm dia 3.80 0.148 22.23 2.779
 PVC DOORS AND WINDOWS
Item No Descirtpion Qty Rate Per Amount
Providing and fixing factory made uPVC white colour sliding
glazed window upto 1.50 m in height dimension comprising of
uPVC multi-chamberedframe with in-built roller track and sash extruded
profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel
section made from rollforming process of required length (shape & size
according to uPVCprofile), appropriate dimension of uPVC extruded
glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile,
zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body
with single nylonrollers (weight bearing capacity to be 40 kg), G.I
fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary
stainless steel screwsetc. Profile of frame & sash shall be mitred cut
and fusion welded at allcorners, including drilling of holes for fixing
MAT -05448 hardware's and drainage ofwater etc. After fixing frame the gap between 1 9000.00 1Sqm 9000.00
frame and adjacent finishedwall shall be filled with weather proof silicon
sealent over backer rod ofrequired size and of approved quality, all
complete as per approved drawing& direction of Engineer-in-
Charge.Three track three panels sliding window with fly
proof SSwire mesh (Two nos. glazed & one no.wire mesh panels) made
of (small series) frame 92 x 44mm & sash 32 x 60 mm both having wall
thickness of 1.9 ± 0.2 mm and single glazing bead of appropriated
imension (Area of window up to 1.75 sqm) MAT -05448

Specification for Foamed PVC Door Frame & ABS Shutters :

Providing of Factory made prelaminated FPVC (Foamed Polyvinyl
Chloride) Door frame of the size 105x40mm with a wall thickness of
10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos.
of 50mm long screw. The door frame shall be fixed to the wall by using
80mm long screws through the frame with the help of PVC fasteners of
BMT-N.67 3 no's to be provided for each vertical member,GI stiffners of ("U" 1 8622.00 Each 8622.00
chanel of size 29x9x1mm, 150mm long) -3 no's athinge point,Frame
reinforcement of("U" GI chanel of size 46x22x.06mm),Bottomtie rod of
("U" GI chanel size of 15x15x1mm) etc. complete as per manufacturers
specification for finished item of work.Maximum door frame size : 980 x
2070
Item No Descirtpion Qty Rate Per Amount
Providing and fixing factory made uPVC white colour sliding
glazed window upto 1.50 m in height dimension comprising of
uPVC multi-chamberedframe with in-built roller track and sash extruded
profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel
section made from rollforming process of required length (shape & size
according to uPVCprofile), appropriate dimension of uPVC extruded
glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile,
zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body
with single nylonrollers (weight bearing capacity to be 40 kg), G.I
fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary
stainless steel screwsetc. Profile of frame & sash shall be mitred cut
and fusion welded at allcorners, including drilling of holes for fixing
BMT-P.80.C 1 6960.00 1Sqm 6960.00
hardware's and drainage ofwater etc. After fixing frame the gap between
frame and adjacent finishedwall shall be filled with weather proof silicon
sealent over backer rod ofrequired size and of approved quality, all
complete as per approved drawing& direction of Engineer-in-Charge.
Two track two panels sliding window made of (big series)
frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3
± 0.2 mm and single glazing bead / double glazing bead of appropriate
dimension . (Area of window above 1.75 sqmupto 2.50 sqm).

Providing & Fixing of Openable Windows with Fly-mesh made of

pre painted steel (Base Steel as per IS 513 of 0.58 mm thick galvanized
as per IS 277 with zinc of 150 GSM) primer coated with epoxy primer of
5-7microns thick, finish painted with a polyester paint of 12-16 microns
thick and back coated with 5-7 microns thick alkyd backer and the
section for outer frame of 72 x 55mm, centre mullion of 72 x 50mm,
section for fixed glass beading section of 12 x 12 mm and section for
shutters of 48 x 25 mm and outer frame & mullion sections with rebate
for glazed shutters, fly mesh and a 20 mm provision for guard bars/grills
BMT-P.07 and fly h shutter section of 20 x 40 mm and the sections cut to length 1 6166.00 1Sqm 6166.00
metre joined with corner bracket, centre mullions fixed with mullion cap,
stay, handles, latch 2 Nos of heavy duty stainless steel pivot hinges per
shutter and panelled with 5mm thick plain float glass and S.S. Mesh for
fly mesh shutter (304 grade), fitted using rubber gaskets including fixing
the windows in the concrete/masonry wall by means of self expanding
screws, including 10mm Square guard bars with 6” (152.4mm) pitch ,
complete for finished item of work Centre fixed both side
openable shutter window 5’0”x4’0” (1524mm x1219.2mm). Outer
frame section size of 72x50mm. Shutter frame section size of 48 x 25

Providing and fixing factory made solid Wood Polymer

Composite (WPC) single extruded Door Frame section of
size with encapsulation of 8MM rigid layer on all the six surfaces. The
door frame will have a rebat of 32MM. Door Frame section of 45x75
MM . The two Vertical members are to be joined together with the
horizontal member using 8x50 MM long MS Star full thread screws to be
BMT-N.83.A 1 555.00 1Rm 555.00
used with reverse forward speed control hand drilling machine. The
ready/assembled door frame is fixed to the wall using hold fast or bolt
fasteners. A minimum of 4 No.s of screws to be provided for each
vertical member & minimum 2no.s for horizontal member.(BMT-N.83.A)
Item No Descirtpion Qty Rate Per Amount

Providing and fixing 28 -30 MM thick solid Wood Polymer single

extruded door shutter with 3MM top and bottom rigid layer with an
BMT-N.88 overall density of 750kg/Cum. It will be fixed to 1 3410.00 1 Sqm 3410.00
the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be
required for fixing the door with the frame (BMT-N.88)

Toilet Door of Size of 750 mm X 2100 mm (Single shutter) (Powder

Sl.No 798 Coated Mild Steel doors, frames & Shutters) 1 11042.00 1 Sqm 11042.00

Differently abled Toilet Door of size of 1200 mm X 2100 mm

Sl.No 799 ( Powder Coated Mild steel doors, frames & shutters ) 1 10853.00 1 Sqm 10853.00

Customized Door (Powder Coated Mild steel doors, frames &

Sl.No 800 shutters) 1 10616.00 1 Sqm 10616.00

Supplying and Fixing of uPVC ( Unplastered polyvinyl

Chloride) windows made of uPVC profile. All sections of frames,
sash and mullion shalll be reinforced with galvanized mild steel,
except but in corners of the windows. ( Outer Frame 74x60x56mm)
Sl.No 801 Mullion (72x60x36) uPVC Panel 158x20mm, single glass bead 1 10539.00 1 Sqm 10539.00
34x18mm, Panel Glass bead 19x18mm, Bay Pole 60x60mm)

Supply and fixing of pre-painted steel windows & top hung

and fixed louvered ventilators made of pre - painted steel (base
steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS
277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7
microns thick, finish painted with a polyester paint of 12-16 microns
thick and back coated with 5-7 microns thick alkyd backer, section for
outer frame of 46 x 52 mm section and for shutter of 46 x 46 mm section
for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm
and section for louvered ventilation of 33 x 56 mm Box section and the
BMT-P.10 windows panelled with 5 mm thick plain float glass & 4 mm pinhead 1 7477.00 1 Sqm 7477.00
glass for ventilators with Ethyl propylene Diamine monomer Gasket
(EPDM) and the sections cut to length mitre joined with corner brocket
centre mullions fixed using mullion cap and with handle made of high
grade aluminium powder coated and nylon receiver, corner brackets
made of CRCA with Zinc Phosphate, Mullion caps made of glass filled
nylon, frames fixed to the concrete /masonry wall by means of self
expanding screws including 10 mm square guard bars with 6" pitch
complete for finished item of work Ventilators: Top Hung 2 '-0" x 2'-0"
(609.6x609.6mm) outer frame section size of 46mm x 52 mm shutter
frame section size of 46mm x 46 mm

Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine

rolled CRCA laths, interlocked together through their entire length and
jointed together at the ends by endlocks, mounted on specially
designed pipe shaft of 50mm dia nominal bore MS B class pipe with
brackets, plates, guide channels, stoppers, bottom locking plates and
BMT-F.29 arrangements for inside & outside locking with push-pull operations 1 4314.00 1 Sqm 4314.00
including cost of hood cover and springs complete, painted with one
coat of approved steel primer, locks, ball bearings, all accessories etc
complete for finished item of work as per special spn: 1108
Item No Descirtpion Qty Rate Per Amount

Supplying & fixing collapsible steel shutters with vertical, double

channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron
40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side
vertical frames of the collapsible gate with 65x65mmx8mm MS sngle
and middle guide rail at site height with 65mmx8mm MS flat for the
BMT-F.30 1 3746.00 1 Sqm 3746.00
pulleys to guide and fixed with necessary hold fasts, bolts, nuts, rivets,
locking arrangements, stoppers, handles, all accessories all fixtures and
painted with one coat of approved steel primer etc., complete for
finished item of work as per special spn 1105

Supply and fixing of Bath room / Toilet door shutter with 16mm
laminated (IS 14276) door shutter with all-round „U‟ lipping of PPS
section of size 12mm X 18mmX 12mmX0.6mm thickness with a
hardware of 12mm dia X200mm long aluminum aldrop – 2 nos( ISI
BMT-N.69 make)2 No of 125mm long handles(ISI make) and also 3 no Of IS304 1 2660.00 1 Sqm 2660.00
grade Patee Hinges 3mmX12mmX180mm long with pole receiver of
10mm dia pole X40mm long welded on 2mm X40mm(ss304) plates
works as receiver for RT patte hinges. The price inclusive of all material
at site
 Fe - 415 Grade Steel Fe - 500 Grade Steel
HYSD bars Binding Blacksmith / Mazdoor HYSD bars Binding Blacksmith Mazdoor
Month & Basic Basic including 5 wire Bar bender (Unskilled)
Rate for Rate for Month & Basic Basic including 5 per wire / Bar (Unskilled
Rate
Year Steel Rate per cent for
overlaps and
Ground First Year Steel Rate cent for
overlaps and
bender ) for
Rate includin wastage Floor Floor Rate including wastage Ground
g GST GST Floor

August-2019 36500 43070 45224 330 4950 4200 54703.50 55618.50 August-2019 37000 43660 45843.00 330 4950 4200 55323
September-2019 36500 43070 45224 330 4950 4200 54703.50 55618.50 September-2019 37000 43660 45843.00 330 4950 4200 55323
October-2019 36500 43070 45224 330 4950 4200 54703.50 55618.50 October-2019 37000 43660 45843.00 330 4950 4200 55323
November-2019 36500 43070 45224 330 4950 4200 54703.50 55618.50 November-2019 37000 43660 45843.00 330 4950 4200 55323
December-2019 36500 43070 45224 330 4950 4200 54703.50 55618.50 December-2019 37000 43660 45843.00 330 4950 4200 55323
January-2020 38500 45430 47702 330 4950 4200 57181.50 58096.50 January-2020 39000 46020 48321.00 330 4950 4200 57801
Feburuary-2020 38500 45430 47702 330 4950 4200 57181.50 58096.50 Feburuary-2020 39000 46020 48321.00 330 4950 4200 57801
March-2020 39000 46020 48321 330 4950 4200 57801.00 58716.00 March-2020 40000 47200 49560.00 330 4950 4200 59040
April-2020 39000 46020 48321 330 4950 4200 57801.00 58716.00 April-2020 40000 47200 49560.00 330 4950 4200 59040
May -2020 39000 46020 48321 330 4950 4200 57801.00 58716.00 May -2020 40000 47200 49560.00 330 4950 4200 59040
June -2020 40500 47790 50180 330 4950 4200 59659.50 60574.50 June -2020 41500 48970 51418.50 330 4950 4200 60898.5
July-2020 40500 47790 50180 330 4950 4200 59659.50 60574.50 July-2020 41000 48380 50799.00 330 4950 4200 60279
August-2020 40500 47790 50180 336 5250 4600 60365.50 61350.50 August-2020 41000 48380 50799.00 336 5250 4600 60985
September-2020 41000 48380 50799 336 5250 4600 60985.00 61970.00 September-2020 41000 48380 50799.00 336 5250 4600 60985
October-2020 41000 48380 50799 336 5250 4600 60985.00 61970.00 October-2020 41500 48970 51418.50 336 5250 4600 61604.5
November-2020 41000 48380 50799 336 5250 4600 60985.00 61970.00 November-2020 43000 50740 53277.00 336 5250 4600 63463
December-2020 46000 54280 56994 336 5250 4600 67180.00 68165.00 December-2020 48000 56640 59472.00 336 5250 4600 69658
January-2021 53000 62540 65667 336 5250 4600 75853.00 76838.00 January-2021 55000 64900 68145.00 336 5250 4600 78331
Feburuary-2021 50000 59000 61950 336 5250 4600 72136.00 73121.00 Feburuary-2021 53000 62540 65667.00 336 5250 4600 75853
March-2021 50500 59590 62570 336 5250 4600 72755.50 73740.50 March-2021 53000 62540 65667.00 336 5250 4600 75853
April-2021 51000 60180 63189 336 5250 4600 73375.00 74360.00 April-2021 54000 63720 66906.00 336 5250 4600 77092
May -2021 52500 61950 65048 336 5250 4600 75233.50 76218.50 May -2021 55000 64900 68145.00 336 5250 4600 78331
June -2021 53000 62540 65667 336 5250 4600 75853.00 76838.00 June -2021 55000 64900 68145.00 336 5250 4600 78331
July-2021 52000 61360 64428 336 5250 4600 74614.00 75599.00 July-2021 55000 64900 68145.00 336 5250 4600 78331
August-2021 51500 60770 63809 384 5500 4900 74592.50 75632.50 August-2021 53500 63130 66286.50 384 5500 4900 77070.5
September-2021 51500 60770 63809 384 5500 4900 74592.50 75632.50 September-2021 54500 64310 67525.50 384 5500 4900 78309.5
October-2021 54500 64310 67526 384 5500 4900 78309.50 79349.50 October-2021 56500 66670 70003.50 384 5500 4900 80787.5
November-2021 55000 64900 68145 384 5500 4900 78929.00 79969.00 November-2021 60000 70800 74340.00 384 5500 4900 85124
December-2021 55000 64900 68145 384 5500 4900 78929.00 79969.00 December-2021 60000 70800 74340.00 384 5500 4900 85124
January-2022 56000 66080 69384 384 5500 4900 80168.00 81208.00 January-2022 58000 68440 71862.00 384 5500 4900 82646
Feburuary-2022 56000 66080 69384 384 5500 4900 80168.00 81208.00 Feburuary-2022 60000 70800 74340.00 384 5500 4900 85124
March-2022 60500 71390 74960 384 5500 4900 85743.50 86783.50 March-2022 68000 80240 84252.00 384 5500 4900 95036
 HYSD bars Binding Blacksmith / Mazdoor HYSD bars Binding Blacksmith Mazdoor
Month & Basic Basic including 5 wire Bar bender (Unskilled)
Rate for Rate for Month & Basic Basic including 5 per wire / Bar (Unskilled
Rate
Year Steel Rate per cent for
overlaps and
Ground First Year Steel Rate cent for
overlaps and
bender ) for
Rate includin wastage Floor Floor Rate including wastage Ground
g GST GST Floor

April-2022 65000 76700 80535 384 5500 4900 91319.00 92359.00 April-2022 73000 86140 90447.00 384 5500 4900 101231
May -2022 62000 73160 76818 384 5500 4900 87602.00 88642.00 May -2022 72000 84960 89208.00 384 5500 4900 99992
June -2022 62000 73160 76818 384 5500 4900 87602.00 88642.00 June -2022 69000 81420 85491.00 384 5500 4900 96275
July-2022 62000 73160 76818 384 5500 4900 87602.00 88642.00 July-2022 64000 75520 79296.00 384 5500 4900 90080.00
August-2022 62000 73160 76818 420 5900 5250 88388.00 89503.00 August-2022 65000 76700 80535.00 420 5900 5250 92105
September-2022 62000 73160 76818 420 5900 5250 88388.00 89503.00 September-2022 64000 75520 79296.00 420 5900 5250 90866
October-2022 61000 71980 75579 420 5900 5250 87149.00 88264.00 October-2022 64000 75520 79296.00 420 5900 5250 90866
November-2022 61000 71980 75579 420 5900 5250 87149.00 88264.00 November-2022 64000 75520 79296.00 420 5900 5250 90866
December-2022 58000 68440 71862 420 5900 5250 83432.00 84547.00 December-2022 62000 73160 76818.00 420 5900 5250 88388
January-2023 60000 70800 74340 420 5900 5250 85910.00 87025.00 January-2023 62000 73160 65100 420 5900 5250 76670
February-2023 60000 70800 74340 420 5900 5250 85910.00 87025.00 February-2023 63000 74340 66150 420 5900 5250 77720
March-2023 61000 71980 75579 420 5900 5250 87149.00 88264.00 March-2023 64500 76110 67725 420 5900 5250 79295
April-2023 61000 71980 75579 420 5900 5250 87149.00 88264.00 April-2023 64500 76110 67725 420 5900 5250 79295
Rate for
First
Floor

56238.00
56238.00
56238.00
56238.00
56238.00
58716.00
58716.00
59955.00
59955.00
59955.00
61813.50
61194.00
61970.00
61970.00
62589.50
64448.00
70643.00
79316.00
76838.00
76838.00
78077.00
79316.00
79316.00
79316.00
78110.50
79349.50
81827.50
86164.00
86164.00
83686.00
86164.00
96076.00
Rate for
First
Floor

102271.00
101032.00
97315.00
91120.00
93220.00
91981.00
91981.00
91981.00
89503.00
77785.00
78835.00
80410.00
80410.00