0% found this document useful (0 votes)
59 views

Alarm/Battery Box Connections: Instructions

This document provides instructions for connecting alarm/battery boxes to alarms and locks. It describes the connections for a small 2789 box and a larger 4002 box. Both can be configured as normally closed or normally open by changing an internal jumper and include connections for an alarm relay, lock cable, and remote input to disable the lock.

Uploaded by

gert.ka71
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
59 views

Alarm/Battery Box Connections: Instructions

This document provides instructions for connecting alarm/battery boxes to alarms and locks. It describes the connections for a small 2789 box and a larger 4002 box. Both can be configured as normally closed or normally open by changing an internal jumper and include connections for an alarm relay, lock cable, and remote input to disable the lock.

Uploaded by

gert.ka71
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

alarm/battery box

Connections
INSTRUCTIONS
2789 Small alarm/battery Box 4002 large alarm/battery Box

Connection
Connection
to Alarm
to Alarm

to Lock
to Lock
Connect to Lock through
BAT Port.

Can be configured as NC or NO Can be configured as NC or NO


by changing the internal jumper. by changing the internal jumper.

2789 Alarm Cable Connections 4002 alarm Connections

4 Wires 26 AWG Alarm Relay Connections


Connect OUT to Alarm
Alarm Relay Connections Normally Open (NO) or Normally Closed (NC)
Red and Black Relay Contacts: Settable
Normally Open (NO) or Normally Closed (NC) 50V DC @ 250 mA Max Load
Relay Contacts: Settable Switches 1 sec.
50V DC @ 250 mA Max Load
Switches 1 sec. Remote Input to Disable or Override Lock
Connect IN to Remote Control
Remote Input to Disable or Override Lock 5-12V DC @ 20 mA Max Input
Yellow: Positive Input (+)
Green: Negative Input (-)
Lock Cable plug
5-12V DC @ 20 mA Max Input
Alarm Cable

Old Version
Relay

Input

Lock Relay Jumper Position


Alarm Relay Jumper Position
Cable plug NC (Right)
NC (Left)
NO (Left)
NO (Right)
Alarm Cable

New Version

Kaba Mas LLC


749 W. Short Street, Lexington, KY 40508 USA
Phone: (859) 253-4744 FAX: (859) 255-2655
Technical Support: (800) 950-4744
Lock NC (Above) www.kaba-mas.com
Cable plug NO (Below)

(P/N)743.049 Rev B 06/09 • © copyright 2009 Kaba Mas LLC


page 1 of 1

You might also like