Digital Door Lock User Guide YDM4109+ MUST READ - This Product can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliabil lity of the network - This product(YDM4109+) is a Security Enabled Z-Wave Plus Product. - Security Enabled Z-Wave Controller must be used in order to fully utllize this product. - Network Module Setting : This setting becomes available through the Main Menu and allows the lock to connect with Controllers. - Reset locally : Z-Wave Module exclusion Please use this procedure only when the network primary controller is missing or otherwise inoperable. Ed Eg Continue Geeaenced Controller (Inclusion) ) @ Complete U. Renee (mee Centnue rey iad pisses | Gop reee Lae "Se tsnsnc cf em 0 etm oh Locally displayed to prevent the door lock from initializing. x You can find the Security 2 DSK information on the product as shown below.Association Command Class % Association Group ™ This product supports ONE association Group. ™ Group is the Lifeline Group. ™ It.can contain up to 1 nodes. x $2 Security CCs and security level ‘Command Class Ver.| Note Command Class Ver.| Note Alarm 1 | Secure | Schedule Entry Lock 3 | Secure Association 2 | Secure | Security 1_| Non Secure Association Group Info 1 | Secure | Security 2 1_| Non Seoure Battery 1 | Secure | Supervision 1 | Secure Configuration 1 | Secure | Time 2_| Non Secure Device Reset Locally 1 | Secure | Time Parameter 1 | Secure Door Lock 2 | Secure | Transport Service 2 | Non Secure Door Lock Logging 1 | Secure | User Code 1 | Secure Manufacturer Specific 2 | Secure | Version 2 | Secure Powerlevel 1 | Secure | Z-Wave Plus Info 2 | Non Secure » Configuration Command Class Set the language of the Door Lock interface Usage Paar Size Value Description 0x01 Korean x02 English Set Language 0x05, 1 byte 0x03 Chinese 0x06 Taiwanese(Front Body, Installation on the outside of the door) Fingerprint Operation Lamp Keypad(10-Key) Dead Bolt Jam Lamp Lever Fingerprint Cover Battery Change Lamp Reset button Emergency Key Emergency Power Supply Terminal 8/9/O/9/O/O/O/O/O\o Emergency Cover GUEcu cued 9V Emergency battery (Optional)(Main Body, Installation on the inside of the door) eer Battery Cover @ Registration button Lever Manual thumb turn Internal Forced Lock Switch 1.5V AA Alkaline Batteries(4EA)) Slot for Remote control module(Option) Volume Control Switch Auto / Manual Lock button @/O/O| B/O/9/S/O\O|o Safe handle buttonRegister Controll MAN Oe (Spiess Reaster 673 nen EQ continue felt ie gg Complete 4 > 7 Enter the Master Press () button Enter [SI], [34] buttons. Enter [ 1], [ #4] buttons Code to register controller. Yalé | > © 4 506 »> “f | \\s 7 6 i's - oA) Touch the keypad of Enter the registered Touch the keypad of Enter the [¢] button. the Front Body with Code on the the Front Body with your palm. keypad. your palm. Unlocking Door with Card Key