Vendor: Cisco

Exam Code: 300-075

Exam Name: Implementing Cisco IP Telephony & Video,

Part 2 v1.0

Version: 19.071
Important Notice
Product
Our Product Manager keeps an eye for Exam updates by Vendors. Free update is available within
One year after your purchase.

You can login member center and download the latest product anytime. (Product downloaded
from member center is always the latest.)

PS: Ensure you can pass the exam, please check the latest product in 2-3 days before the exam
again.

Feedback
We devote to promote the product quality and the grade of service to ensure customers interest.

If you have any questions about our product, please provide Exam Number, Version, Page
Number, Question Number, and your Login Account to us, please contact us at
[email protected] and our technical experts will provide support in 24 hours.

Copyright
The product of each order has its own encryption code, so you should use it independently.

If anyone who share the file we will disable the free update and account access.

Any unauthorized changes will be inflicted legal punishment. We will reserve the right of final
explanation for this statement.

Order ID: ****************

PayPal Name: ****************

PayPal ID: ****************

QUESTION 1
Which statement is true regarding the configuration of SAF Forwarder?

A. In a multisite dial plan, SAF Forwarders may exist in multiple autonomous systems.
B. The client label that is configured in Cisco Unified Communications Manager must match the
configuration on the SAF Forwarder router.
C. There should not be multiple nodes of Cisco Unified Communications Manager clusters acting as
SAF clients.
D. The destination IP address must match the loopback address of the SAF router.

Answer: A

QUESTION 2
Which three devices support the SAF Call Control Discovery protocol? (Choose three.)

A. Cisco Unified Border Element

B. Cisco Unity Connection
C. Cisco IOS Gatekeeper
D. Cisco Catalyst Switch
E. Cisco IOS Gateway
F. Cisco Unified Communications Manager

Answer: AEF

QUESTION 3
Which component of Cisco Unified Communications Manager is responsible for sending
keepalive messages to the Service Advertisement Framework forwarder?

A. Call Control Discovery requesting service

B. Hosted DNs service
C. Service Advertisement Framework client control
D. Cisco Unified Communications Manager database
E. Service Advertisement Framework-enabled trunk
F. gatekeeper

Answer: C

QUESTION 4
What is an advantage of TEHO?

A. TEHO implemented with ISRs eliminates PSTN toll charges.

B. TEHO implemented with ISRs can reduce PSTN toll charges.
C. TEHO implemented with AAR reduces toll charges.
D. TEHO implemented with CFUR reroutes calls.

Answer: B

QUESTION 5
Which two options are valid service parameter settings that are used to set up proper video QoS

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 2
http://www.passleader.com
behavior across the Cisco Unified Communications Manager infrastructure? (Choose two.)

A. DSCP for Video Calls when RSVP Fails

B. Default Intraregion Min Video Call Bit Rate (Includes Audio)
C. Default Interregion Max Video Call Bit Rate (Includes Audio)
D. DSCP for Video Signaling
E. DSCP for Video Signaling when RSVP Fails

Answer: AC

QUESTION 6
Which sign is prefixed to the number in global call routing?

A. -
B. +
C. #
D. @
E. &
F. *

Answer: B

QUESTION 7
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the
Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and
TMS control the Cisco Telepresence Conductor, the Cisco TelePresence MCU, and the Cisco
Jabber TelePresence for Windows

DNS Server:

Device Pool:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 3
http://www.passleader.com
Expressway:

ILS:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 4
http://www.passleader.com
Locations:

MRA:

Speed Dial:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 5
http://www.passleader.com
SIP TRUNK:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 6
http://www.passleader.com
What two tasks must be completed in order to support calls between the VCS controlled
endpoints and the Cisco Unified CM endpoints? (Choose two.)

A. Media Resource Group List.

B. Configure a SIP trunk on the Cisco Unified CM to point to the Cisco VCS.
C. Configure a neighbor zone on the Cisco Unified CM to point to the Cisco VCS.
D. Configure a SIP trunk on the Cisco VCS to point to the Cisco Unified CM.
E. Configure a neighbor zone on the Cisco VCS to point to the Cisco Unified CM.

Answer: BE

QUESTION 8
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for
Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20.
the Cisco TelePresence MCU. and the Cisco Jabber TelePresence for Windows

DP:

Locations:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 7
http://www.passleader.com
CSS:

Movie Failure:

Movie Setting:

Topology:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 8
http://www.passleader.com
Subzones:

Links:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 9
http://www.passleader.com
Pipe:

Both of the Cisco Telepresence Video for Windows clients are able to log into the server but can't
make any calls. After reviewing the exhibits, which of the following reasons could be causing this
failure?

A. Wrong username and/or password.

B. Wrong SIP domain name.
C. The TMSPE is not working.
D. The bandwith is incorrectly configured.

Answer: D

QUESTION 9
Which two options for a Device Mobility-enabled IP phone are true? (Choose two.)

A. The phone configuration is not modified.

B. The roaming-sensitive parameters of the current (that is, the roaming) device pool are applied.
C. The user-specific settings determine which location-specific settings are downloaded from the
Cisco Unified Communications Manager device pool.
D. If the DMGs are the same, the Device Mobility-related settings are also applied.

Answer: BD

QUESTION 10
The network administrator of Enterprise X receives reports that at peak hours, some calls

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 10
http://www.passleader.com
between remote offices are not passing through. Investigation shows no connectivity problems.
The network administrator wants to estimate the volume of calls being affected by this issue.
Which two RTMT counters can give more information on this? (Choose two.)

A. CallsRingNoAnswer
B. OutOfResources
C. LocationOutOfResources
D. RequestsThrottled
E. CallsAttempted

Answer: BC

QUESTION 11
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the DX650. the
Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the
SX20. the Cisco Telepresence MCU. and the Cisco Jabber Telepresence for Windows.

SX20 System information:

DX650 Configuration:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 11
http://www.passleader.com
MRGL:

DP:

Locations:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 12
http://www.passleader.com
AARG:

CSS:

Movi Failure:

Movie Settings:

What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the
exhibit? (Choose two)

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 13
http://www.passleader.com
A. Incorrect username and password.
B. Wrong SIP domain configured.
C. User is not associated with the device.
D. IP or DNS name resolution issue.
E. CSF Device is not registered.
F. IP Phone DN not associated with the user.

Answer: BD

QUESTION 12
Assume that the Cisco IOS SAF Forwarder is configured correctly.
Which minimum configurations on Cisco Unified Communications Manager are needed for the
SAF registration to take place?

A. SAF Trunk, SAF Security Profile, SAF Forwarder, and CCD Advertising Service
B. SAF Trunk, SAF Security Profile, SAF Forwarder, and CCD Requesting Service
C. SAF Trunk, SAF Security Profile, SAF Forwarder, CCD Requesting Service, and CCD Advertising
Service
D. SAF Trunk, SAF Security Profile, and SAF Forwarder
E. SAF Trunk, CCD Requesting Service, and CCD Advertising Service

Answer: B

QUESTION 13
When a SIP trunk is added for Call Control Discovery, which statement is true?

A. The SIP trunk is added by selecting SIP Trunk and SIP Protocol.
The Enable SAF check box should be selected.
B. The SIP trunk is added by selecting SIP Trunk and SIP Protocol.
The Trunk Service Type should be Call Control Discovery.
C. The SIP trunk is added by selecting Call Control Discovery Trunk and then selecting SIP as the
protocol to be used.
D. The SIP trunk is added by selecting SIP Trunk and SIP Protocol.
The destination IP address field is configured as `SAF' to indicate that this trunk is used for SAF.

Answer: B

QUESTION 14
When an H.323 trunk is added for Call Control Discovery, which statement is true?

A. The H.323 trunk is added by selecting Inter-Cluster Trunk (Non-Gatekeeper Controlled) and
Device Protocol Inter-Cluster Trunk. The Enable SAF check box should be selected in the trunk
configuration.
B. The H.323 trunk is added by selecting Inter-Cluster Trunk (Non-Gatekeeper Controlled) and
Device Protocol Inter-Cluster Trunk. The Trunk Service Type should be Call Control Discovery.
C. The H.323 trunk is added by selecting Call Control Discovery Trunk and then selecting H.323 as
the protocol to be used.
D. The H.323 trunk is added by selecting H.323 Trunk, and selecting Inter-Cluster Trunk as the
Device Protocol. The destination IP address field is configured as `SAF' to indicate that this trunk
is used for SAF.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 14
http://www.passleader.com
Answer: A

QUESTION 15
Which Cisco IOS command is used to verify that a SAF Forwarder that is registered with Cisco
Unified Communications Manager has established neighbor relations with an adjacent SAF
Forwarder?

A. show eigrp service-family ipv4 neighbors

B. show eigrp address-family ipv4 neighbors
C. show voice saf dndball
D. show saf neighbors
E. show ip saf neighbors

Answer: A

QUESTION 16
Which Cisco IOS command is used to verify that the Cisco Unified Communications Manager
Express has registered with the SAF Forwarder?

A. show eigrp service-family ipv4 clients

B. show eigrp address-family ipv4 clients
C. show voice saf dndb all
D. show saf registration
E. show ip saf registration

Answer: A

QUESTION 17
Which statement about Service Advertisement Framework is true?

A. SAF requires that the EIGRP be configured on all routers, including non-SAF routers.
B. SAF requires that the EIGRP be configured only on SAF routers.
Non-SAF routers act as an IP cloud.
C. SAF has no dependency on the underlying routing protocol, as long as it is a dynamic routing
protocol.
Static routes are not supported.
D. SAF operates on any dynamic or static IP routing configuration.
SAF is totally independent of the underlying routing protocol.

Answer: D

QUESTION 18
Which three devices support the SAF Call Control Discovery protocol? (Choose three.)

A. Cisco Unified Border Element

B. Cisco Unity Connection
C. Cisco IOS Gatekeeper
D. Cisco Catalyst Switch

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 15
http://www.passleader.com
E. Cisco IOS Gateway
F. Cisco Unified Communications Manager

Answer: AEF

QUESTION 19
Which type of search message appears in the Cisco TelePresence Video Communication Server
search history page when it receives a H.323 call from a RAS-enabled endpoint that originates
from an external zone?

A. ARQ
B. SETUP
C. LRQ
D. INVITE
E. OPTIONS

Answer: C

QUESTION 20
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the DX650. the
Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the
SX20. the Cisco Telepresence MCU. and the Cisco Jabber Telepresence for Windows.

SX20 System information:

DX650 Configuration:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 16
http://www.passleader.com
MRGL:

DP:

Locations:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 17
http://www.passleader.com
AARG:

CSS:

Movi Failure:

Movie Settings:

A new DX650 IP phone with MAC address D0C7.8914.132D. IP address is 172.18-32.119 has
been added to the Cisco Unified Communications Manager, but is not registering properly. What
is causing this failure?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 18
http://www.passleader.com
A. Device Pool cannot be default.
B. The DX650 is the incorrect calling search space.
C. The DX650 Phones does not support SIP.
D. The location Hub_None has not been activated.
E. The DX650's MAC address is incorrect in the Cisco UCM.

Answer: E

QUESTION 21
Which two statements regarding you configuring a traversal server and traversal client
relationship are true? (Choose two.)

A. VCS supports only the H.460.18/19 protocol for H.323 traversal calls.
B. VCS supports either the Assent or the H.460.18/19 protocol for H.323 traversal calls.
C. VCS supports either the Assent or the H.460.18/19 protocol for SIP traversal calls.
D. If the Assent protocol is configured, a TCP/TLS connection is established from the traversal client
to the traversal server for SIP signaling.
E. A VCS Expressway located in the public network or DMZ acts as the firewall traversal client.

Answer: BD

QUESTION 22
Which statement about the function of the "+" symbol in the E.164 format is true?

A. The "+" symbol represents the international country code.

B. The "+" symbol represents the international call prefix.
C. The "+" symbol matches the preceding element one or more times.
D. The "+" symbol matches the preceding element zero or one time.

Answer: B

QUESTION 23
You need to verify if the Media Gateway Control Protocol gateway is enabled and active.
Which command should you use for this purpose?

A. show running-config
B. show fallback-mgcp
C. show gateway
D. show ccm-manager fallback-mgcp
E. show running-config gateway
F. show fallback-mgcp ccm-manager

Answer: D

QUESTION 24
Which task must you perform before deleting a transcoder?

A. Delete the dependency records.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 19
http://www.passleader.com
B. Unassign it from a media resource group.
C. Use the Reset option.
D. Remove the device pool.
E. Remove the subunit.
F. Delete the common device configuration.

Answer: B

QUESTION 25
In a node-specific Service Advertisement Framework forwarder deployment model, what is the
maximum number of Service Advertisement Framework forwarders that you can assign to a
specific node?

A. 1
B. 2
C. 3
D. 4
E. 5
F. 6

Answer: B

QUESTION 26
Which two actions ensure that the call load from Cisco TelePresence Video Communication
Server to a Cisco Unified Communications Manager cluster is shared across Unified CM nodes?
(Choose two.)

A. Create a neighbor zone in VCS with the Unified CM nodes listed as location peer addresses.
B. Create a single traversal client zone in VCS with the Unified CM nodes listed as location peer
addresses.
C. Create one neighbor zone in VCS for each Unified CM node.
D. Create a VCS DNS zone and configure one DNS SRV record per Unified CM node.
E. In VCS set Unified Communications mode to Mobile and remote access and configure each
Unified CM node.

Answer: AD

QUESTION 27
Where do you specify the device mobility group and physical location after they have been
configured?

A. phones
B. DMI
C. device mobility CSS
D. device pool
E. MRGL
F. locale

Answer: D
Explanation:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 20
http://www.passleader.com
Before you configure a device pool, you must configure the following items if you want to choose
them for the device pool, Cisco Unified Communications Manager group (required), Date/time
group (required). Region (required) , SRST reference (optional). Media resource group list
(optional), Calling search space for auto-registration (optional). Reverted call focus priority
(optional), Device mobility group (optional), Device mobility calling search space, Physical
location (optional). Location, AAR group. AAR calling search space.

QUESTION 28
Which three commands are necessary to override the default CoS to DSCP mapping on interface
Fastethernet0/1? (Choose three.)

A. mls qos map cos-dscp 0 10 18 26 34 46 48 56

B. mls qos map dscp-cos 8 10 to 2
C. mls qos
D. interface Fastethernet0/1
mls qos trust cos
E. interface Fastethernet0/1
mls qos cos 1
F. interface Fastethernet0/2
mls qos cos 1

Answer: ACD

QUESTION 29
If delegated credentials checking has been enabled and remote workers can register to the VCS
Expressway, which statement is true?

A. H.323 message credential checks are delegated.

B. SIP registration proxy mode is set to On in the VCS Expressway.
C. A secure neighbor zone has been configured between the VCS Expressway and the VCS
Control.
D. SIP registration proxy mode is set to Off in the VCS Expressway.

Answer: D

QUESTION 30
A local gateway is registered to Cisco TelePresence Video Communication Server with a prefix of
7. The administrator wants to stop calls from outside the organization being routed through it.
Which CPL configuration accomplishes this goal?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 21
http://www.passleader.com
A.

B.

C.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 22
http://www.passleader.com
D.

E.

Answer: A

QUESTION 31
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the DX650. the
Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the
SX20. the Cisco Telepresence MCU. and the Cisco Jabber Telepresence for Windows.

SX20 System information:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 23
http://www.passleader.com
DX650 Configuration:

MRGL:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 24
http://www.passleader.com
DP:

Locations:

AARG:

CSS:

Movi Failure:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 25
http://www.passleader.com
Movie Settings:

Which device configuration option will allow an administrator to assign a device to a specific rights
for making calls to specific DNs?

A. Media Resource Group List

B. Device Pool
C. Location
D. AAR Group
E. Calling Search Space

Answer: E

QUESTION 32
Widgets.com's Cisco TelePresence Video Communication Server allows SIP and H.323
registrations. Which local zone search rule configuration allows SIP registered endpoints to
connect to H.323 endpoints that register with an H.323
E.164 number only?

A.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 26
http://www.passleader.com
B.

C.

D.

Answer: D

QUESTION 33
Which configuration does Cisco recommend for the peer address on the Expressway-C secure
traversal zone when the Expressway-E has one NIC enabled?

A. Expressway-E internal IP address

B. Expressway-E external IP address
C. Expressway-E internal FQDN
D. Expressway-E external FQDN

Answer: D

QUESTION 34
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for
Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20.
the Cisco TelePresence MCU. and the Cisco Jabber TelePresence for Windows

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 27
http://www.passleader.com
DP:

Locations:

CSS:

Movie Failure:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 28
http://www.passleader.com
Movie Setting:

Topology:

Subzones:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 29
http://www.passleader.com
Links:

Pipe:

What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the
exhibit? (Choose two)

A. Incorrect username and password.

B. Wrong SIP domain configured.
C. User is not associated with the device.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 30
http://www.passleader.com
D. IP or DNS name resolution issue.
E. CSF Device is not registered.
F. IP Phone DN not associated with the user.

Answer: BD

QUESTION 35
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for
Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20.
the Cisco TelePresence MCU. and the Cisco Jabber TelePresence for Windows

DP:

Locations:

CSS:

Movie Failure:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 31
http://www.passleader.com
Movie Setting:

Topology:

Subzones:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 32
http://www.passleader.com
Links:

Pipe:

A third collaboration call fails between the backbone site and the HQ site. After reviewing the
exhibits, which of the following reasons could be causing this failure?

A. Not enough bandwidth has been allocated.

B. Device Pool.
C. Location.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 33
http://www.passleader.com
D. The pipe is not functioning.

Answer: A

QUESTION 36
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the
Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and
TMS control the Cisco Telepresence Conductor, the Cisco TelePresence MCU, and the Cisco
Jabber TelePresence for Windows

DNS Server:

Device Pool:

Expressway:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 34
http://www.passleader.com
ILS:

Locations:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 35
http://www.passleader.com
MRA:

Speed Dial:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 36
http://www.passleader.com
SIP TRUNK:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 37
http://www.passleader.com
The intercluster URI call routing no longer allows calls between sites.
What is the reason why this would happen?

A. Wrong SIP domain configured.

B. User is not associated with the device.
C. IP or DNS name resolution issue.
D. No SIP route patterns for cisco.lab exist.

Answer: C

QUESTION 37
Which two options should be selected in the SIP trunk security profile that affect the SIP trunk
pointing to the VCS? (Choose two.)

A. Accept Unsolicited Notification

B. Enable Application Level Authorization
C. Accept Out-of-Dialog REFER
D. Accept Replaces Header
E. Accept Presence Subscription

Answer: AD

QUESTION 38
Which two options are configuration steps on Cisco Unified Communications Manager that are
used when integrating with VCS Expressway servers? (Choose two.)

A. allowing numeric dialing from Cisco phones to Expressway

B. configuring a device pool with video feature enabled
C. allowing dialing to Expressway domain from Cisco phones

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 38
http://www.passleader.com
D. creating an application user on Cisco Unified Communications Manager with assigned privileges
E. adding the Expressway servers to the Application Servers list

Answer: AC

QUESTION 39
What is the purpose of the local route group?

A. minimize PSTN costs

B. help in the selection of the PSTN egress gateway
C. eliminate the need for a route list
D. allow manipulation of digits at the cost point to egress

Answer: B

QUESTION 40
Which action configures PSTN backup for calls that are rejected by the gatekeeper CAC?

A. Configure AAR in Cisco Unified Communications Manager.

B. Configure CFUR in Cisco Unified Communications Manager.
C. Configure a route pattern, a route list, and route groups to a trunk and a gateway in Cisco Unified
Communications Manager.
D. Configure a route pattern to a gateway in Cisco Unified Communications Manager.

Answer: C

QUESTION 41
Cisco Unified Communications Manager is configured with CAC for a maximum of 10 voice calls.
Which action routes the 11th call through the PSTN?

A. Configure an SIP trunk to the ISR.

B. Configure Cisco Unified Communications Manager AAR.
C. Configure Cisco Unified Communications Manager RSVP-enabled locations.
D. Configure Cisco Unified Communications Manager locations.

Answer: B

QUESTION 42
Which solution is needed to enable presence and extension mobility to branch office phones
during a WAN failure?

A. SRST with MGCP fallback

B. SRST without MGCP fallback
C. Cisco Unified Communications Manager Express in SRST mode
D. SRST with VoIP dial peers to Cisco Unified Communications Manager Express

Answer: C

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 39
http://www.passleader.com
QUESTION 43
Which option configures the secondary dial tone option for SRST mode to let the users hear the
dial tone for PSTN calls?

A. voice service voip

secondary dialtone 0
B. call-manager-fallback
secondary dialtone 0
C. dial-peer voice 1 pots
secondary dialtone 0
D. ccm-manager secondary dialtone 0

Answer: B

QUESTION 44
Which action is performed by the Media Gateway Control Protocol gateway with SRST
configured, when it loses connectivity with the primary and backup Cisco Unified Communications
Manager servers?

A. The gateway continues to make an attempt to connect to the backup Cisco Unified
Communications Manager server.
B. The gateway falls back to the H.323 protocol for further call processing.
C. The gateway continues with the MGCP call processing without any interruption.
D. The gateway waits for the primary Cisco Unified Communications Manager server to come alive.
E. All MGCP call processing is interrupted until the Cisco Unified Communications Manager servers
are online.
F. The MGCP calls are queued up until the Cisco Unified Communications Manager servers are
online.

Answer: B

QUESTION 45
Which three commands are mandatory to implement SRST for five Cisco IP Phones? (Choose
three.)

A. call-manager-fallback
B. max-ephones
C. keepalive
D. limit-dn
E. ip source-address

Answer: ABE

QUESTION 46
Which parameter should be set to prevent H.323 endpoints from registering to Cisco
TelePresence Video Communication Server automatically?

A. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Discover to off.
B. On the VCS, navigate to Configuration, Protocols, H.323, and set Auto Registration to off.
C. On the VCS, navigate to Configuration, Registration, Allow List, and set Auto Registration to off.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 40
http://www.passleader.com
D. On the VCS, navigate to Configuration, Registration, Configuration, and set Auto Registration to
off.

Answer: A

QUESTION 47
Which two statements about configuring mobile and remote access on Cisco TelePresence Video
Communication Server Expressway are true? (Choose two.)

A. The traversal server zone on Expressway-C must have a TLS verify subject name configured.
B. The traversal client zone and the traversal server zone Media encryption mode must be set to
Force encrypted.
C. The traversal client zone and the traversal server zone Media encryption mode must be set to
Auto.
D. The traversal client zone on Expressway-C Media encryption mode must be set to Auto.
E. The traversal client zone and the traversal server zone must be set to SIP TLS with TLS verify
mode set to On.

Answer: BE

QUESTION 48
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the DX650. the
Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS and TMS
controll the the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows

DP:

Locations:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 41
http://www.passleader.com
CSS:

SRST:

SRST-BR2-Config:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 42
http://www.passleader.com
BR2 Config:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 43
http://www.passleader.com
SESTPSTNCall:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 44
http://www.passleader.com
Which device configuration option will allow an administrator to control bandwidth between calls
placed between branches?

A. Media Resource Group List

B. Device Pool
C. Location
D. AAR Group
E. Regions

Answer: C

QUESTION 49
A voicemail product that supports only the G.711 codec is installed in headquarters. Which action
allows branch Cisco IP phones to function with voicemail while using only the G.729 codec over
the WAN link to headquarters?

A. Configure Cisco Unified Communications Manager regions.

B. Configure transcoding within Cisco Unified Communications Manager.
C. Configure transcoding resources in Cisco IOS and assign to the MRGL of Cisco IP phones.
D. Configure transcoder resources in the branch Cisco IP phones.

Answer: C

QUESTION 50
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the DX650. the
Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS and TMS
controll the the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows

DP:

Locations:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 45
http://www.passleader.com
CSS:

SRST:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 46
http://www.passleader.com
SRST-BR2-Config:

BR2 Config:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 47
http://www.passleader.com
SESTPSTNCall:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 48
http://www.passleader.com
After adding SRST functionality the SRST does not work. After reviewing the exhibits, which of
the following reasons could be causing this failure?

A. Device Pool cannot be default.

B. The Cisco UCM is pointing to the wrong IPv4 address of the BR router.
C. The router does not support SRST.
D. The SRST enabled router is not configured correctly.

Answer: A

QUESTION 51
Which option is a benefit of implementing CFUR?

A. CFUR is designed to initiate TEHO to reduce toll charges.

B. CFUR can prevent phones from unregistering.
C. CFUR can reroute calls placed to a temporarily unregistered destination phone.
D. CFUR eliminates the need for COR on an ISR.

Answer: C

QUESTION 52
What is the standard Layer 3 DSCP media packet value that should be set for Cisco
TelePresence endpoints?

A. CS3 (24)
B. EF (46)
C. AF41 (34)
D. CS4 (32)

Answer: D

QUESTION 53
You want to perform Media Gateway Control Protocol gateway maintenance. For this purpose,
you disable Media Control Gateway Protocol gateway using the no mgcp command. After you
perform the maintenance, you want to enable the Media Control Gateway Protocol gateway.
Which command should you use?

A. enable mgcp
B. mgcp
C. mgcp enable
D. mgcp yes
E. activate mgcp
F. mgcp active

Answer: B

QUESTION 54
Which gateway does the Cisco Unified Communications Manager control all call activity?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 49
http://www.passleader.com
A. SIP
B. MGCP
C. H.323
D. Media

Answer: B

QUESTION 55
Which action configures phones in site A to use G.711 to site B, but uses G.729 to site C?

A. Configure Cisco Unified Communications Manager regions.

B. Configure Cisco Unified Communications Manager locations.
C. Configure transcoder resources in Cisco Unified Communications Manager.
D. Configure a gatekeeper.

Answer: A

QUESTION 56
Refer to the exhibit. Which statement is true?

A. Endpoints can make calls to unknown IP addresses without the VCS querying any neighbors.
B. If the VCS receives a call to an unknown IP address, it queries its neighbors for the remote
address and if permitted, it routes the call through the neighbor.
C. Endpoints that are registered directly to the VCS can call only an IP address of a system that is
also registered directly to that VCS.
D. Dialing by IP address is not supported on VCS.

Answer: A

QUESTION 57
You want to avoid unnecessary interworking in Cisco TelePresence Video Communication
Server, such as where a call between two H.323 endpoints is made over SIP, or vice versa.
Which setting is recommended?

A. H.323 - SIP interworking modE. Reject

B. H.323 - SIP interworking modE. On
C. H.323 - SIP interworking modE. Registered only
D. H.323 - SIP interworking modE. Off
E. H.323 - SIP interworking modE. Variable

Answer: C

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 50
http://www.passleader.com
QUESTION 58
Which commands are needed to configure Cisco Unified Communications Manager Express in
SRST mode?

A. telephony-service and srst mode

B. telephony-service and moh
C. call-manager-fallback and srst mode
D. call-manager-fallback and voice-translation

Answer: A

QUESTION 59
Which component is needed to set up SAF CCD?

A. SAF-enabled H.323 intercluster (gatekeeper controlled) trunk

B. SAF forwarders on Cisco routers
C. Cisco Unified Communications cluster
D. SAF-enabled H.225 trunk

Answer: B

QUESTION 60
Which command is needed to utilize local dial peers on an MGCP-controlled ISR during an SRST
failover?

A. ccm-manager fallback-mgcp
B. telephony-service
C. dialplan-pattern
D. isdn overlap-receiving
E. voice-translation-rule

Answer: A

QUESTION 61
When you configure QoS on VCS, which settings do you apply if traffic through the VCS should
be tagged with DSCP AF41?

A. Set QoS mode to DiffServ and tag value 32.

B. Set QoS mode to IntServ and tag value to 34.
C. Set QoS mode to DiffServ and tag value 34.
D. Set QoS mode to IntServ and tag value to 32.
E. Set QoS mode to ToS and tag value to 32.

Answer: C

QUESTION 62
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the
Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 51
http://www.passleader.com
TMS control the Cisco Telepresence Conductor, the Cisco TelePresence MCU, and the Cisco
Jabber TelePresence for Windows

DNS Server:

Device Pool:

Expressway:

ILS:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 52
http://www.passleader.com
Locations:

MRA:

Speed Dial:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 53
http://www.passleader.com
SIP TRUNK:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 54
http://www.passleader.com
Which three configuration tasks need to be completed on the router to support the registration of
Cisco Jabber clients? (Choose three.)

A. The DNS server has the wrong IP address.

B. The internal DNS Service (SRV) records need to be updated on the DNS Server.
C. Flush the DNS Cache on the client.
D. The DNS AOR records are wrong.
E. Add the appropriate DNS SRV for the Internet entries on the DNS Server.

Answer: BCE

QUESTION 63
With Media Gateway Control Protocol configuration on the voice gateway, which three types of
messages are involved in the call flow between the call agent and the voice gateway? (Choose
three.)

A. audit endpoint
B. modify endpoint
C. create connection
D. delete notification
E. restart in progress
F. end connections

Answer: ACE

QUESTION 64
Which task must you perform before deleting a transcoder?

A. Delete the dependency records.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 55
http://www.passleader.com
B. Unassign it from a media resource group.
C. Use the Reset option.
D. Remove the device pool.
E. Remove the subunit.
F. Delete the common device configuration.

Answer: B

QUESTION 65
How many active gatekeepers can you can define in a local zone?

A. 1
B. 2
C. 5
D. 10
E. 15
F. unlimited

Answer: A

QUESTION 66
Company X has a Cisco Unified Communications Manager cluster and a VCS Control server with
video endpoints registered on both systems. Users find that video endpoints registered on Call
manager can call each other and likewise for the endpoints registered on the VCS server. The
administrator for Company X realizes he needs a SIP trunk between the two systems for any
video endpoint to call any other video endpoint. Which two steps must the administrator take to
add the SIP trunk? (Choose two.)

A. Set up a SIP trunk on Cisco UCM with the option Device-Trunk with destination address of the
VCS server.
B. Set up a subzone on Cisco UCM with the peer address to the VCS cluster.
C. Set up a neighbor zone on the VCS server with the location of Cisco UCM using the menu option
VCS Configuration > Zones > zone.
D. Set up a SIP trunk on the VCS server with the destination address of the Cisco UCM and
Transport set to TCP.
E. Set up a traversal subzone on the VCS server to allow endpoints that are registered on Cisco
UCM to communicate.

Answer: AC

QUESTION 67
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the DX650. the
Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS and TMS
controll the the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows

DP:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 56
http://www.passleader.com
Locations:

CSS:

SRST:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 57
http://www.passleader.com
SRST-BR2-Config:

BR2 Config:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 58
http://www.passleader.com
SESTPSTNCall:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 59
http://www.passleader.com
After configuring the CFUR for the directory number that is applied to BR2 phone
(+442288224001). the calls fail from the PSTN. Which two of the following configurations if
applied to the router, would remedy this situation? (Choose two.)

A. dial-peer voice 1 pots

incoming called-number 228822....
direct-inward-dial
port 0/0/0:15
B. dial-peer voice 1 pots
incoming called-number 228822....
direct-inward-dial
port 0/0/0:13
C. voice translation-rule 1
rule 1/rt228821....S//+44&/
exit ! voice translation-profile pstn-in
translate called 1
!
voice-port 0/0/0:15
translation-profile incoming pstn-in
D. voice translation-rule 1
rule 1/rt228822....S//+44&/
exit ! voice translation-profile pstn-in
translate called 1
!
voice-port 0/0/0:15
translation-profile incoming pstn-in
E. The router does not need to be configured.

Answer: AD

QUESTION 68
Refer to the exhibit. Which configuration change is needed to enable NANP international dialing
during MGCP fallback?

A. Change the dial peer to dial-peer voice 901 voip.

B. Change the dial peer to dial-peer voice 9011 pots.
C. Add the command prefix 011 to the dial peer.
D. Add the command prefix 9011 to the dial peer.

Answer: C

QUESTION 69
Which statement is true regarding the configuration of SAF Forwarder?

A. In a multisite dial plan, SAF Forwarders may exist in multiple autonomous systems.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 60
http://www.passleader.com
B. The client label that is configured in Cisco Unified Communications Manager must match the
configuration
on the SAF Forwarder router.
C. There should not be multiple nodes of Cisco Unified Communications Manager clusters acting as
SAF clients.
D. The destination IP address must match the loopback address of the SAF router.

Answer: A

QUESTION 70
Which technologies provide remote-site redundancy for Cisco IP Phones during a WAN failure?

A. SRST and MGCP fallback

B. SRST and TEHO
C. TEHO and MGCP fallback
D. SRST and AAR

Answer: A

QUESTION 71
What are two important considerations when implementing TEHO to reduce long-distance cost?
(Choose two.)

A. on-net calling patterns

B. E911 calling
C. number of route patterns
D. caller ID

Answer: BD

QUESTION 72
Which statement about TEHO is true?

A. The dial plan is simplified with local route groups.

B. Local route groups add complexity to the dial plan.
C. Toll charges can be reduced when TEHO is implemented with CAC.
D. Toll charges can be reduced when TEHO is implemented with MGCP fallback.

Answer: A

QUESTION 73
How are Cisco IP Phones directly configured to utilize local route groups?

A. with Cisco Unified Communications Manager device pools

B. with Cisco Unified Communications Manager CSS and partitions
C. with Cisco Unified Communications Manager regions
D. with Cisco Unified Communications Manager locations
E. with Cisco Unified Communications Manager AAR

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 61
http://www.passleader.com
Answer: A

QUESTION 74
When you configure TEHO for long-distance calls and use the local PSTN gateways as fallback,
how many route patterns do you require for a cluster with five sites that are located in different
area codes?

A. 15 when not using a local route group

B. 6 when using a local route group
C. 5 when using a local route group
D. 10 when not using a local route group

Answer: B

QUESTION 75
Which two statements about international multisite dial plans are true? (Choose two.)

A. TEHO is legal in all countries.

B. TEHO is legal in most countries, but illegal in others.
C. TEHO reduces WAN utilization.
D. TEHO utilizes WAN links.

Answer: BD

QUESTION 76
What impact do roaming-sensitive settings and Device Mobility settings have on call routing?

A. Device Mobility settings have no impact on call routing, but roaming-sensitive settings modify the
AAR group, AAR CSS, and device CSS.
B. Device Mobility settings modify the device CSS and the roaming-sensitive settings modify the
AAR group and AAR CSS.
C. Device Mobility settings modify the AAR group and the AAR CSS, the roaming-sensitive settings
modify the device CSS.
D. Roaming-sensitive settings are settings that do not have an impact on call routing. Device Mobility
settings, on the other hand, may have an impact on call routing because they modify the device
CSS, AAR group, and AAR CSS.

Answer: D

QUESTION 77
When device mobility mode is enabled or disabled for a cluster, to which does the cluster setting
apply?

A. all phones in the cluster that support device mobility

B. all phones in the cluster that subscribed to device mobility
C. mobile phones in the cluster that support device mobility
D. mobile phones in the cluster that are in default mode

Answer: A

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 62
http://www.passleader.com
QUESTION 78
Which statement is true when device mobility mode is enabled or disabled in the Phone
Configuration window?

A. The device mobility mode phone settings take precedence over the service parameter settings.
B. The service parameter settings take precedence over the device mobility mode phone settings.
C. The combined service parameter settings and the device mobility mode phone settings will be
used.
D. The default settings will be used due to the conflicts.

Answer: A

QUESTION 79
Which statement about the host portion format in Cisco Unified Communications Manager URI
dialing is false?

A. The host portion cannot start or end with a hyphen.

B. The host portion is not case sensitive.
C. The host portion accepts characters a-z, A-Z, 0-9, hyphens, and periods.
D. The host portion can have two periods in a row.

Answer: D

QUESTION 80
Which statement about setting up FindMe in Cisco TelePresence Video Communication Server is
true?

A. Users are allowed to delete or change the address of their principal devices.
B. Endpoints should register with an alias that is the same as an existing FindMe ID.
C. If VCS is using Cisco TMS provisioning, users manage their FindMe accounts via VCS.
D. A VCS cluster name must be configured.

Answer: D

QUESTION 81
Which system configuration is used to set a restriction on audio bandwidth?

A. region
B. location
C. physical location
D. licensing

Answer: B

QUESTION 82
Which two statements regarding IPv4 Static NAT address 209.165.200.230 has been configured
on a VCS Expressway are true? (Choose two.)

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 63
http://www.passleader.com
A. The Advanced Networking or Dual Network Interfaces option key has been installed.
B. VCS rewrites the Layer 3 source address of outbound SIP and H.323 packets to
209.165.200.230.
C. VCS applies 209.165.200.230 to outbound SIP and H.323 payload messages.
D. With static NAT enabled on the LAN2 interface, VCS applies 209.165.200.230 to outbound H.323
and SIP payload traffic exiting the LAN1 interface.

Answer: AC

QUESTION 83
The network administrator has been investigating bandwidth issues between the central office
and remote sites where location-based CAC is implemented. What does the Cisco Unified
Communications Manager "LocationOutOfResources" counter indicate?

A. This counter represents the total number of times that a call on a particular Cisco Unified
Communications Manager through the location failed due to lack of bandwidth.
B. This counter represents the total number of times that a call through locations failed due to the
lack of bandwidth.
C. This counter represents the total number of failed video-stream requests (most likely due to lack
of bandwidth) in the location where the person who initiated the video conference resides.
D. This counter represents the total number of times since the last restart of the Cisco IP Voice
Streaming Application that a Cisco Unified Communications Manager connection was lost.

Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/8_6_1/rtmt/rtmt/rtpmcm.html
#wp1063631

QUESTION 84
How many active gatekeepers can you can define in a local zone?

A. 1
B. 2
C. 5
D. 10
E. 15
F. unlimited

Answer: A

QUESTION 85
When video endpoints register with Cisco Unified Communications Manager, where are DSCP
values configured?

A. in Unified CM, under Enterprise Parameters Configuration

B. in Unified CM, under Device > Device Settings > Device Defaults
C. in Unified CM, under Service Parameters > Cisco CallManager Service > Cluster-wide
Parameters
D. DSCP parameters are always configured on each individual video endpoint.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 64
http://www.passleader.com
Answer: C

QUESTION 86
Which statement best describes globalized call routing in Cisco Unified Communications
Manager?

A. All incoming calling numbers on the phones are displayed as an E.164 with the + prefix.
B. Call routing is based on numbers represented as an E.164 with the + prefix format.
C. All called numbers sent out to the PSTN are in E.164 with the + prefix format.
D. The CSS of all phones contain partitions assigned to route patterns that are in global format.
E. All phone directory numbers are configured as an E.164 with the + prefix.

Answer: B

QUESTION 87
Which device is used to connect to the H.323 gatekeeper?

A. H.323 gateway
B. SIP trunk
C. H.323 trunk
D. MGCP gateway

Answer: C

QUESTION 88
The corporate WAN has been extended to two newly acquired sites and it includes gatekeeper
support. Each site has a Cisco CallManager and an H.323 gateway that allows connection to the
PSTN. Which connection method is best for these two new customers?

A. H.225 trunk (gatekeeper-controlled)

B. intercluster trunk (non-gatekeeper controlled)
C. SIP trunk
D. intercluster trunk (gatekeeper-controlled)

Answer: D

QUESTION 89
Which two are gatekeeper-controlled trunk options that support gatekeeper call administration
control? (Choose two.)

A. H.323
B. H.245
C. H.225
D. intercluster
E. intracluster

Answer: CD

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 65
http://www.passleader.com
QUESTION 90
Assume that local route groups are configured. When an IP phone moves from one device
mobility group to another, which two configuration components are not changed? (Choose two.)

A. IP subnet
B. user settings
C. SRST reference
D. region
E. phone button settings

Answer: BE
Explanation:
Although the phone may have moved from one subnet to another, the physical location and
associated services have not changed.

QUESTION 91
Which three statements about configuring an encrypted trunk between Cisco TelePresence Video
Communication Server and Cisco Unified Communications Manager are true? (Choose three.)

A. The root CA of the VCS server certificate must be loaded in Cisco Unified Communications
Manager.
B. A SIP trunk security profile must be configured with Incoming Transport Type set to TCP+UDP.
C. The Cisco Unified Communications Manager trunk configuration must have the destination port
set to 5061.
D. A SIP trunk security profile must be configured with Device Security Mode set to TLS.
E. A SIP trunk security profile must be configured with the X.509 Subject Name from the VCS
certificate.
F. The Cisco Unified Communications Manager zone configured in VCS must have SIP
authentication trust mode set to On.
G. The Cisco Unified Communications Manager zone configured in VCS must have TLS verify mode
set to Off.

Answer: ACE

QUESTION 92
Which system configuration is used to set audio codecs?

A. region
B. location
C. physical location
D. licensing

Answer: A

QUESTION 93
During device failover to the secondary Cisco Unified Communications Manager server, how
does the phone recognize that the primary server is back?

A. The secondary server keeps sending keepalive message to the primary server and when it
succeeds, it unregisters the phones to force them to register to the primary.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 66
http://www.passleader.com
B. When the primary server goes online, it sends out an "ALIVE" message via broadcast so that the
phones re-register.
C. The phones never re-register with the primary server until the active (secondary) one goes down.
D. The phone sends keepalive messages to the primary server frequently and when it succeeds, the
phone re-registers with it.

Answer: D

QUESTION 94
If the device pool in the phone record does not match the device pools in the matching subnet,
what will the system consider the phone to be?

A. roaming
B. unregistered
C. unknown
D. new device

Answer: A

QUESTION 95
Which two Cisco Extension Mobility attributes are available in the user device profile? (Choose
two.)

A. regions
B. description
C. phone button template
D. NTP information

Answer: BC

QUESTION 96
What is the default DSCP/PHB for video conferencing packets in Cisco Unified Communications
Manager?

A. EF/46
B. CS6/48
C. AF41/34
D. CS3/24
E. CS4/32

Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/uc_system/design/guides/videodg/vidguid
e/qos.html

QUESTION 97
Which feature allows you to specify which endpoints ring when someone calls a user on a
specific destination ID?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 67
http://www.passleader.com
A. FindME
B. Extension Mobility
C. Speech Connect
D. Single Number Reach

Answer: A

QUESTION 98
The administrator at Company X is getting user reports of inconsistent quality on video calls
between endpoints registered to Cisco Unified Communications Manager. The administrator runs
a wire trace while a video call is taking place and sees that the packets are not set to AF41 for
desktop video as they should be. Where should the administrator look next to confirm that the
correct DSCP markings are being set?

A. on the MGCP router at the edge of both networks

B. the service parameters in the VCS Control
C. the QoS service parameter in Cisco Unified Communications Manager
D. on the actual Cisco phone itself because the DSCP setting is not part of its configuration file
downloaded at registration
E. The setting cannot be changed for video endpoints that are registered to Cisco Unified
Communications Manager, but only when they are registered to the VCS Control.

Answer: C

QUESTION 99
Which command displays the detailed configuration of all the Cisco Unified IP phones, voice
ports, and dial peers of the Cisco Unified SRST router?

A. show call-manager-fallback all

B. show dial-peer voice summary
C. show ephone summary
D. show voice port summary

Answer: A

QUESTION 100
Which two options should be used to create a secure traversal zone between the Expressway-C
and Expressway-E? (Choose two.)

A. Expressway-C and Expressway-E must trust each other's server certificate.

B. One Cisco Unified Communications traversal zone for H.323 and SIP connections.
C. A separate pair of traversal zones must be configured if an H.323 connection is required and
Interworking is disabled.
D. Enable username and password authentication verification on Expressway-E.
E. Create a set of username and password on each of the Expressway-C and Expressway-E to
authenticate the neighboring peer.

Answer: AC

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 68
http://www.passleader.com
QUESTION 101
A video endpoint is configured with SIP only.
What does a video endpoint use to register with the VCS Control?

A. IP address
B. SIP URI
C. MAC address
D. system name

Answer: B

QUESTION 102
Which zone will the VCS Control use to route calls to the VCS Expressway?

A. neighbor zone
B. DNS zone
C. traversal client zone
D. ENUM zone

Answer: C

QUESTION 103
You want to configure Cisco VCS SIP endpoints and H.323 endpoints so that they communicate
with one another. To do this, which format must you use in the Search Rule?

A. name@domain
B. IP Address (192.168.100.0)
C. name@hostname
D. name@IP Address (192.168.100.0)

Answer: A

QUESTION 104
When you connect a Cisco VCS Control to Cisco Unified Communications Manager by using a
SIP trunk, which mechanism do you use to verify that the trunk has an active connection?

A. OPTIONS ping
B. DNS tracing
C. Continuous ping
D. Dynamic DNS

Answer: A

QUESTION 105
Which DNS SRV Records must be configured on the external DNS server in a mobile remote
access scenario with Cisco Expressway?

A. _collab-edge._tls.example.com
B. _collab-edge._udp.example.com

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 69
http://www.passleader.com
C. _cisco-uds._tcp.example.com
D. _cuplogin._tcp.example.com

Answer: A

QUESTION 106
Company X currently uses a Cisco Unified Communications Manager, which has been configured
for IP desk phones and Jabber soft phones. Users report however that whenever they are out of
the office, a VPN must be set up before their Jabber client can be used. The administrator for
Company X has deployed a Collaboration Expressway server at the edge of the network in an
attempt to remove the need for VPN when doing voice. However, devices outside cannot register.
Which two additional steps are needed to complete this deployment? (Choose two.)

A. A SIP trunk has to be set up between the Expressway-C and Cisco UCM.
B. An additional interface must be enabled on the Cisco UCM and placed in the same subnet at the
Expressway.
C. The customer firewall must be configured with any rule for the IP address of the external Jabber
client.
D. The Expressway server needs a neighbor zone created that points to Cisco UCM.
E. Jabber cannot connect to Cisco UCM unless it is on the same network or a VPN is set up from
outside.

Answer: AD

QUESTION 107
A new administrator at Company X has deployed a VCS Control on the LAN and VCS
Expressway in the DMZ to facilitate VPN-less SIP calls with users outside of the network.
However, the users report that calls via the VCS are erratic and not very consistent.
What must the administrator configure on the firewall to stabilize this deployment?

A. The VCS Control should not be on the LAN, but it must be located in the DMZ with the
Expressway.
B. The firewall at Company X must have all SIP ALG functions disabled.
C. The firewall at Company X requires a rule to allow all traffic from the DMZ to pass to the same
network that the VCS Control is on.
D. A TMS server is needed to allow the firewall traversal to occur between the VCS Expressway and
the VCS Control servers.

Answer: B

QUESTION 108
The VCS Expressway can be configured with security controls to safeguard external calls and
endpoints. One such option is the control of trusted endpoints via a whitelist.
Where is this option enabled?

A. on the voice-enabled firewall at the edge of the network

B. on the VCS under Configuration > registration > configuration
C. on the TMS server under Registrations > whitelist
D. on the VCS under System > configuration > Registrations

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 70
http://www.passleader.com
Answer: B

QUESTION 109
Which statement about configuring the Cisco VCS Control and Cisco VCS Expressway is true?

A. You do not need to configure search rules for traversal calls.

B. You need to configure the firewall to allow communication from the Cisco VCS Expressway to the
Cisco VCS Control.
C. The username on the Cisco VCS Control and Cisco VCS Expressway are local and do not need
to match.
D. The Cisco VCS Expressway is the Traversal Server.

Answer: D

QUESTION 110
Company X wants to implement RSVP-based Call Admission Control and move away from the
current location-based configuration.
Where does the administrator go to create a default profile?

A. System > Call Manager > Clusterwide > Service Parameters > RSVP
B. System > Service Parameters > RSVP
C. System > Service Parameters > Call Manager > Clusterwide parameters > RSVP
D. on each MGCP gateway at all remote locations

Answer: C

QUESTION 111
Where can you change the clusterwide DSCP setting for Cisco Unified Communications
Manager?

A. enterprise parameters
B. service parameters
C. enterprise phone configuration
D. Ethernet configuration

Answer: B

QUESTION 112
Refer to the exhibit. What is the correct value to use for the "DSCP for TelePresence Calls" Cisco
CallManager service parameter?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 71
http://www.passleader.com
A. 28 (011100)
B. 34 (100010)
C. 41 (101001)
D. 46 (101110)

Answer: B
Explanation:
The standard DSCP for Telepresence calls” is CS4/32, then, the correct answer for this question
should be 32, but as it is not part of the result option, the most appropriated option would be “B”,
34, which would be part of the standard DSCP for Video AF41/34.
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/uc_system/design/guides/videodg/vidguid
e/qos.html

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 72
http://www.passleader.com
QUESTION 113
Which two statements about remote survivability are true? (Choose two.)

A. SRST supports more Cisco IP Phones than Cisco Unified Communications Manager Express in
SRST mode.
B. Cisco Unified Communications Manager Express in SRST mode supports more Cisco IP Phones
than SRST.
C. MGCP fallback is required for ISDN call preservation.
D. MGCP fallback functions with SRST.

Answer: AD

QUESTION 114
Which two options enable routers to provide basic call handling support for Cisco Unified IP
Phones if they lose connection to all Cisco Unified Communications Manager systems? (Choose
two.)

A. SCCP fallback
B. Cisco Unified Survivable Remote Site Telephony
C. Cisco Unified Communications Manager Express
D. MGCP fallback
E. Cisco Unified Communications Manager Express in SRST mode

Answer: BE

QUESTION 115
When considering Cisco Unified Communications Manager failover, how many backup servers
can be configured in a Cisco Unified Communications Manager Group?

A. 1
B. 5
C. 2
D. 4
E. 3
F. 6

Answer: C

QUESTION 116
Which three CLI commands are used when configuring H.323 call survivability for all calls?
(Choose three.)

A. voice service voip

B. telephony-service
C. h323
D. call preserve
E. call-router h323-annexg
F. transfer-system

Answer: ACD

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 73
http://www.passleader.com
QUESTION 117
When configuring Cisco Unified Survivable Remote Site Telephony, which CLI command enables
this feature on the router?

A. call-manager-fallback
B. ccm-manager redundant-host
C. ccm-manager sccp local
D. ccm-manager switchback

Answer: A

QUESTION 118
How long is the default keepalive period for SRST in Cisco IOS?

A. 45 sec
B. 30 sec
C. 60 sec
D. 120 sec

Answer: B

QUESTION 119
Which option is a valid test scenario to verify that Cisco Unified Communications Manager
failover works and endpoints register with the backup call manager?

A. During a predetermined maintenance window, stop the Cisco IP Phone Services service on the
primary Unified CM. Devices should reregister with the backup Unified CM in the Cisco
CallManager Group.
B. During a predetermined maintenance window, stop the Unified CM service on the Publisher.
Devices should reregister with the backup Publisher in the Cisco CallManager Group.
C. During a predetermined maintenance window, stop the TFTP service on the primary call
manager. Devices should reregister with the backup Unified CM in the Cisco CallManager Group.
D. During a predetermined maintenance window, stop the Unified CM service on the primary call
manager. Devices should reregister with the backup Unified CM in the CallManager Group.

Answer: D

QUESTION 120
Which three commands can be used to verify SRST fallback mode? (Choose three.)

A. show telephony-service all

B. show telephony-service ephone-dn
C. show telephony-service ephone
D. show telephony-service voice-port
E. show telephony-service tftp-bindings

Answer: ABC

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 74
http://www.passleader.com
QUESTION 121
Company X has a Cisco Unified Communications Manager cluster and a Cisco Unity Connection
cluster at its head office and implemented SRST for its branch offices. One Monday at 2:00 pm,
the WAN connection to a branch office failed and stayed down for 45 minutes. That day the help
desk received several calls from the branch saying their voicemail was not working but they were
able to make and receive calls.
Why did the users not realize the WAN was down and prevented access to their voicemail?

A. All the phones should have started ringing the instant the WAN connection failed to signal the
start of SRST mode.
B. All calls should have dropped when the WAN failed so users would be instantly aware.
C. Although the phones were still working, the users should have noticed that the phone displays
said "SRST Fallback Active".
D. The voice administrators at the head office did not call the users to notify them.

Answer: C

QUESTION 122
What are two important considerations when implementing TEHO to reduce long-distance cost?
(Choose two.)

A. on-net calling patterns

B. E911 calling
C. number of route patterns
D. caller ID

Answer: BD

QUESTION 123
Which two statements about the use of the Intercluster Lookup Service in a multicluster
environment are true? (Choose two.)

A. Cisco Unified Communications Manager uses the ILS to support intercluster URI dialing.
B. ILS contains an optional directory URI replication feature that allows the clusters in an ILS
network to replicate their directory URIs to the other clusters in the ILS network.
C. Directory URI replication does not need to be enabled individually for each cluster.
D. To enable URI replication in a cluster, check the Exchange Directory URIs with Remote Clusters
check box that appears in the SIP trunk configuration menu.
E. If the ILS and directory URI replication feature is disabled on a cluster, this cluster still accepts
ILS advertisements and directory URIs from other neighbor clusters; it just does not advertise its
local directory URIs.

Answer: AB

QUESTION 124
In Cisco Unified Communications Manager, where do you configure the +E.164 number that is
advertised globally via ILS?

A. ILS configuration under Advanced Features

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 75
http://www.passleader.com
B. +E.164 alternate number under Directory Number Settings
C. Device Information under Phone Configuration
D. Route Pattern under Route/Hunt

Answer: B

QUESTION 125
When implementing a dial plan for multisite deployments, what must be present for SRST to work
successfully?

A. dial peers that address all sites in the multisite cluster

B. translation patterns that apply to the local PSTN for each gateway
C. incoming and outgoing COR lists
D. configuration of the gateway as an MGCP gateway

Answer: B

QUESTION 126
Which code snippet is required for SAF to be initialized?

A. Service Family
B. External-Client
C. router eigrp
D. topology base

Answer: C

QUESTION 127
When using SAF, how do you prevent multiple nodes in a cluster from showing up in the Show
Advance section of the SAF Forwarder configuration?

A. Configure the publisher node only in the SAF Forwarder configuration page.
B. Append an @ symbol at the end of the client label value in the SAF Forwarder configuration
page.
C. Configure the correct node in the EIGRP configuration of the gateway router that is associated
with the Cisco Unified Communications Manager node.
D. Configure the SAF Security Profile Configuration to support only a single node.

Answer: B

QUESTION 128
Which statement about the SAF Client Control is correct?

A. The SAF Client Control is a configurable inherent component of Cisco Unified Communications
Manager.
B. The SAF Client Control is a non-configurable inherent component of Cisco Unified
Communications Manager.
C. The SAF Client Control is a non-configurable inherent component of the Cisco IOS Routers.
D. The SAF Client Control is a configurable inherent component of the Cisco IOS Routers.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 76
http://www.passleader.com
Answer: B

QUESTION 129
If you want to delete a SAF-enabled trunk from Cisco Unified Communications Manager
Administration, what must you do first?

A. Disassociate the trunk from the CCD advertising service or CCD requesting service.
B. Delete the trunk from the CCD requesting service node.
C. Place the Cisco Unified Communications Manager node in standby mode.
D. Redirect CCD advertising and requesting services to another Cisco Unified Communications
Manager.

Answer: A

QUESTION 130
Which functionality does ILS use to link all hub clusters in an ILS network?

A. Fullmesh
B. Automesh
C. ILS updates
D. multicast

Answer: B

QUESTION 131
Which option is known as the location attribute that the global dialplan replication uses to
advertise its dial plan information?

A. location controller
B. route pattern
C. route string
D. URI

Answer: C

QUESTION 132
Refer to the exhibit. If an IP phone in San Jose roams to New York, which two IP phone settings
will be modified by Device Mobility so that the phone can place and receive calls in New York?
(Choose two.)

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 77
http://www.passleader.com
A. The physical locations are not different, so the configuration of the phone is not modified.
B. The physical locations are different, so the roaming-sensitive parameters of the roaming device
pool are applied.
C. The device mobility groups are the same, so the Device Mobility-related settings are applied in
addition to the roaming-sensitive parameters.
D. The Device Mobility information is associated with one or more device pools other than the home
device pool of the phone, so one of the associated device pools is chosen based on a round-robin
load-sharing algorithm.
E. The Device Mobility information is associated with the home device pool of the phone, so the
phone is considered to be in its home location. Device Mobility will reconfigure the roaming-
sensitive settings of the phone.

Answer: BC

QUESTION 133
What happens when a user logs in using the Cisco Extension Mobility Service on a device for
which the user has no user device profile?

A. The Extension Mobility log in fails.

B. The device takes on the default device profile for its type.
C. The user can log in but does not have access to any features, soft key templates, or button
templates.
D. The device uses the first device profile assigned to the user in Cisco Unified Communications
Manager.

Answer: B

QUESTION 134

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 78
http://www.passleader.com
Which three steps are required when configuring extension mobility in Cisco Unified
Communications Manager? (Choose three.)

A. Create the extension mobility IP Phone Service.

B. Check the Home Cluster checkbox on the End User Configuration page.
C. Check the Enable Extension Mobility checkbox on the Directory Number Configuration page.
D. Unsubscribe all other services from the Cisco IP Phone.
E. Create a user Device Profile.
F. Subscribe the extension mobility IP Phone Service to the user Device Profile.

Answer: AEF

QUESTION 135
How many Cisco Unified Mobility destinations can be configured per user?

A. 1
B. 10
C. 4
D. 6

Answer: B

QUESTION 136
When configuring Cisco Unified Mobility, which parameter defines the access control for a call
that reaches out to a remote destination?

A. Calling Party Transformation Calling Search Space under Remote Destination Profile Information
B. User Local under Remote Destination Profile Information
C. Rerouting Calling Search Space under Remote Destination Profile Information
D. Rerouting Calling Search Space under Remote Destination information
E. Calling Search Space under Phone Configuration

Answer: C

QUESTION 137
Which two bandwidth management parameters are available during the configuration of Cisco
Unified Communications Manager regions? (Choose two.)

A. Default Audio Call Rate

B. Max Audio Bit Rate
C. Default Video Call Rate
D. Max Video Call Bit Rate (Includes Audio)
E. Max Number of Video Sessions

Answer: BD

QUESTION 138
In Cisco Unified Communications Manager, where do you configure the default bit rate for audio
and video devices?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 79
http://www.passleader.com
A. Enterprise Parameters
B. Region under Region Information
C. Cisco CallManager service under Service Parameter Configuration
D. Enterprise Phone Configuration

Answer: C
Explanation:
For enhanced scalability and to conserve resources, Cisco recommends that you properly set the
default values in the Clusterwide Parameters (System - Location and Region) section of the Cisco
Unified Communications Manager AdministrationService Parameters Configuration window for
the audio codec, video call bandwidth, and link loss type values and then choose the Use System
Default entries in the Cisco Unified Communications Manager Administration Region
Configuration window for these fields.
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_1_1/ccmcfg/CUCM_BK_A
34970C5_00_admin-guide-91/CUCM_BK_A34970C5_00_admin-guide-91_chapter_0111.html

QUESTION 139
Which module is the minimum PVDM3 module needed to support video transcoding?

A. PVDM3-32
B. PVDM3-64
C. PVDM3-128
D. PVDM3-192

Answer: C

QUESTION 140
When implementing a Media Termination Point, what determines the number of sessions that is
supported on each DSP?

A. the codecs that are used in universal transcoding mode

B. the size of the cluster that is being designed
C. the number of full-duplex media streams
D. the Cisco Unified Communications Manager node setting

Answer: A

QUESTION 141
Which statement is true when considering a Cisco VoIP environment for regional configuration?

A. G.711 requires 128K of bandwidth per call.

B. G.729 requires 24K of bandwidth per call.
C. The default codec does not matter if you have defined a hardware MTP in your Cisco Unified
Communications Manager environment.
D. To deploy a Cisco H.323 gatekeeper, you must configure MTP resources on the gatekeeper and
only use G.711 between regions.

Answer: B
Explanation:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 80
http://www.passleader.com
The Cisco best practicse enforces G.729/24K to compress BW for regions. The hardware MTP
only supports G.711 a-law and G.711 u-law. Also regions will need transcoders if multiple codecs
are deployed, NOT hardware MTP. Talking to other friends of mine, it seems that there is a
question on the exam now, where it asks for two answers, then, it would be B and C, but taking in
consideration the below questions asks for one answer only, the most correct one is B.

QUESTION 142
When you use the Query wizard to configure the trace and log central feature to collect install
logs, if you have servers in a cluster in a different time zone, which time is used?

A. TLC adjusts the time change appropriately.

B. TLC uses its local time for all systems.
C. TLC queries for the time zone as part of configuration.
D. TLC produces an error and must be run remotely.

Answer: A

QUESTION 143
When a call is made from a video endpoint to a Cisco TelePresence EX90 that is registered to a
Cisco VCS Control, which portion of the destination URI is the is the first match that is attempted?

A. the full URI, including the domain portion

B. the destination alias, without the domain portion
C. the E.164 number that is assigned to the Cisco TelePresence EX90
D. the directory number that is assigned to the Cisco TelePresence EX90

Answer: B

QUESTION 144
In a distributed call processing network with locations-based CAC, calls are routed to and from
intercluster trunks. Which trunk type is implemented in this network?

A. intercluster trunk with gatekeeper control

B. intercluster trunk without gatekeeper control
C. SIP trunk
D. h225 trunk

Answer: B

QUESTION 145
Refer to the exhibit. The "DSCP for Video Calls" Cisco CallManager service parameter is set to
34. What is the correct DSCP value to use when configuring a class map in a Cisco IOS router?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 81
http://www.passleader.com
A. cs4
B. ef
C. af23
D. af41

Answer: D

QUESTION 146
What is the default DSCP/PHB for TelePresence video conferencing packets in Cisco Unified
Communications Manager?

A. EF/46
B. CS6/48
C. AF41/34
D. CS3/24
E. CS4/32

Answer: E

QUESTION 147
How is a SIP trunk in Cisco Unified Communications Manager configured for SIP precondition?

A. The configuration is done by selecting a SIP precondition trunk for trunk type.
B. The configuration is automatically selected when RSVP is enabled for the location assigned to the
trunk.
C. SIP precondition is configured by selecting E2E for RSVP over SIP on the default SIP profile
assigned to the SIP trunk.
D. SIP precondition is configured by configuring a new SIP profile and selecting E2E for RSVP over

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 82
http://www.passleader.com
 SIP.
The new SIP profile must then be assigned to the SIP trunk.

Answer: D

QUESTION 148
Which statement about SIP precondition is most correct?

A. When configuring SIP precondition, the SIP trunk must have access to an RSVP agent.
B. When configuring SIP precondition, the IP phones must have access to an RSVP agent.
C. When configuring SIP precondition, the IP phones and SIP trunk must have access to an RSVP
agent.
D. RSVP agents are only required for the IP phones. SIP trunks require RSVP agents only when fall
back to local RSVP is configured.
E. SIP trunk will always require RSVP agents regardless of what RSVP type is configured.

Answer: D

QUESTION 149
Refer to the exhibit. Assume that NANP is being used and 9 is used for PSTN access code Long
distance national calls are preceded with 1.
How should the HQ Cisco Unified Communications Manager be configured for calls to 3XXX to
be sent to the gatekeeper at 1 0 1 6 1 with PSTN backups?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 83
http://www.passleader.com
A. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route
groups. The first route group contains the H 225 trunk. The second route group contains the
MGCP gateway with prefix digits 1 408555 for the outgoing called number.
B. Configure a route pattern for 1#3XXX Assign this route pattern to a route list that points to a route
group that lists the H 225 trunk as first choice and the MGCP gateway as a second choice.
C. Configure a route pattern for 4085543XXX.
Assign this route pattern to a route list that points to two route groups. The first route group
contains the H 226 trunk. The second route group contains MGCP gateway.
D. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route
groups. The first route group contains the H 225 trunk. The second route group contains MGCP
gateway with prefix digits 91 408554 for the called number.

Answer: A

QUESTION 150
Refer to the exhibit. IT shows an H.323 gateway configuration in a Cisco Unified Communications
Manager environment. An inbound PSTN call to this H.323 gateway fails to connect to IP phone
extension 2001. The PSTN user hears a reorder tone. Debug isdn q931 on the H.323 gateway
shows the correct called-party number as 5015552001.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 84
http://www.passleader.com
Which two configuration changes can correct this issue? (Choose two.)

A. Add port 1/0:23 to dial-peer voice 123 pots.

B. Ensure that the Significant Digits for inbound calls on the H.323 gateway configuration is 4.
C. Add a voice translation profile to truncate the number from 10 digits to 4 digits. Apply the voice
translation profile to the Voice-port. The configuration field "Significant Digits for inbound calls" is
left at default (All).
D. Add the command h323-gateway voip id on interface vlan120.
E. Change the destination-pattern on the dial-peer voice 23000 VoIP to 501501? and change the
Significant Digits for inbound calls to 4.

Answer: BE
Explanation:
Choose the number of significant digits to collect, from 0 to 32. Cisco Unified Communications
Manager counts significant digits from the right (last digit) of the number that is called.

QUESTION 151
Which device is needed to integrate H.320 into the Cisco video solution?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 85
http://www.passleader.com
A. video gateway
B. MGCP gateway
C. H.323 gatekeeper
D. MCU

Answer: C
Explanation:
As with H.323 MCUs, H.320 gateways are provisioned in Cisco Unified CallManager as H.323
gateways, and then route patterns are configured to extend calls to these devices.

QUESTION 152
The following exhibit shows configs for H.323 gateway. You have been asked to implement
TEHO from a remote branch office with area code 301 to the HQ office with area code 201 using
Cisco Unified Communications Manager. The remote office has an MGCP gateway and the HQ
office has an H.323 gateway. Once the call arrives at the HQ, it should break out to the PSTN as
a seven-digit local call. Which statement about the route pattern is true?

A. route pattern should be 91201.[2-9]XXXXXX with Discard Digit as Predot and Prefix 9
B. route pattern should be 91201.[2-9]XXXXXX with Discard Digit as Predot
C. route pattern should be 91201.[2-9]XXXXXX
D. route pattern should be 9.1201[2-9]XXXXXX with Discard Digit as Predot
E. route pattern should be 9.1201[2-9]XXXXXX with Discard Digit as Predot and Prefix 9

Answer: A

QUESTION 153
Which two statements about the functionality of a gatekeeper are true? (Choose two.)

A. Cisco Unified Communications Manager has gatekeeper functionality built in.

B. Cisco Unified Communications Manager registers with a gatekeeper via SIP.
C. Cisco Unified Communications Manager registers with a gatekeeper via H.323.
D. A gatekeeper can enable CAC and AAR.
E. A gatekeeper can enable CAC, but not AAR.

Answer: CE

QUESTION 154
Which option describes a function of SIP preconditions?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 86
http://www.passleader.com
A. SIP preconditions enable end-to-end RSVP over an SIP trunk.
B. SIP preconditions enable RSVP between Cisco IP Phones.
C. SIP preconditions can be enabled in a gatekeeper.
D. SIP preconditions enable end-to-end RSVP for calls through the PSTN.

Answer: A

QUESTION 155
Which statement about the function of a gatekeeper is true?

A. A gatekeeper improves call routing between servers within a single Cisco Unified
Communications Manager cluster.
B. A gatekeeper can replace the dial plan of a Cisco Unified Communications Manager cluster.
C. A gatekeeper can simplify the dial plan between many different Cisco Unified Communications
Manager clusters.
D. Gatekeepers can be implemented to deploy RSVP-based CAC.

Answer: C

QUESTION 156
For which VoIP protocol does a gatekeeper provide address translation and control access?

A. H.323
B. SIP
C. Skinny
D. H.248

Answer: A

QUESTION 157
Which CAC configuration on a gatekeeper restricts to 10 G.711 audio calls?

A. Use the command bandwidth 10.

B. Use the command bandwidth 1280.
C. Use the command bandwidth 160.
D. Use the command bandwidth session 10.

Answer: B

QUESTION 158
What user profile is used to define the settings for a user on login?

A. Device Profile
B. Group Profile
C. Pool Profile
D. Specific Profile

Answer: A

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 87
http://www.passleader.com
QUESTION 159
Which statement about technology implementation strategy is true?

A. Cisco Unified Communications Manager Express can be configured to function with no Cisco
Unified Communications Manager cluster in the enterprise.
B. Cisco Unified Communications Manager Express in SRST mode can be configured to function
with no Cisco Unified Communications Manager cluster in the enterprise.
C. SRST can be configured to function with no Cisco Unified Communications Manager cluster in
the enterprise.
D. SRST and MGCP fallback can be configured to function with no Cisco Unified Communications
Manager cluster in the enterprise.

Answer: A

QUESTION 160
What command is used to map internal extensions to the corresponding E.164 PSTN number
when using Cisco Unified Communications Manager Express in SRST mode?

A. ephone-dn
B. dialplan-pattern
C. number
D. number-e.164
E. ephone-transnumber

Answer: B

QUESTION 161
Which statement about enrollment in the IP telephony PKI is true? (Source. Understanding Cisco
IP Telephony Authentication and Encryption Fundamentals)

A. CAPF enrollment supports the use of authentication strings.

B. The CAPF itself has to enroll with the Cisco CTL client.
C. LSCs are issued by the Cisco CTL client or by the CAPF.
D. MICs are issued by the CAPF itself or by an external CA.

Answer: A

QUESTION 162
An update of the configuration using the Cisco CTL client not needed when _______.

A. a Cisco Unified CallManager has been removed

B. an LSC of the IP phone is upgraded
C. a security token is added to the system
D. an IP address of the Cisco TFTP server has been changed

Answer: B

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 88
http://www.passleader.com
QUESTION 163
Which statement is not true about GARP?

A. GARP attacks require access to the target LAN or VLAN.

B. GARP can be used for a man-in-the-middle attack.
C. GARP is normally used for HSRP.
D. GARP can be disabled at Cisco IP phones.

Answer: C
Explanation:
GARP (Gratuitous ARP) announce the presence of IP Phone on the network.

QUESTION 164
Enabling authentication and encryption for CTI, JTAPI, and TAPI applications requires which two
tasks? (Choose two.)

A. Enter the encryption key into the application.

B. Set up an IPsec association between the application and Cisco Unified CallManager.
C. Configure related security parameters in the CTI, JTAPI, and TAPI application.
D. Add the application user or end users to the Standard CTI Secure Connection user group,
Standard CTI Allow Reception of SRTP Key Material user group, and Standard CTI Enabled user
group.

Answer: CD
Explanation:
You must also add the application users or the end users to the Standard CTI Secure Connection
user group in Cisco Unified Communications Manager Administration to enable TLS for the
application. After you add the user to this group and install the certificate, the application ensures
that the user connects via the TLS port.

QUESTION 165
Which two statements about symmetric encryption are true? (Choose two.)

A. With symmetric encryption, the encryption key equals the decryption key.
B. Symmetric encryption is commonly used to sign asymmetric keys.
C. Symmetric encryption is a good choice for real-time encryption of bulk data.
D. Symmetric encryption uses asymmetric keys.

Answer: AC
Explanation:
There are two basic techniques for encrypting information: symmetric encryption (also called
secret key encryption) and asymmetric encryption (also called public key encryption.) in
symmetric key As long as both sender and recipient know the secret key, they can encrypt and
decrypt all messages that use this key. A public key is made freely available to anyone who might
want to send you a message. A second, private key is kept secret, so that only you know it.

QUESTION 166
Refer to the exhibit. Locations-based CAC has been configured between HQ and the BR site.
Assume that the priority queue has been provisioned correctly for three G.729 calls.
What happens when the fourth call is placed from HO to BR?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 89
http://www.passleader.com
A. The call will get through via the WAN. but it will experience poor audio quality.
B. The call will fail.
C. The call will be queued until one of the existing calls drop.
D. The call will get through without any issues.

Answer: B

QUESTION 167
Video calls using 384 kbps need to be supported across a gatekeeper-controlled trunk. What
value should be entered into the gatekeeper to support this bandwidth?

A. 768 kbps
B. 384 kbps
C. 512 kbps
D. 192 kbps

Answer: B

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 90
http://www.passleader.com
Explanation:
A 384-kb/s video call may comprise G.711 at 64 kb/s (for audio) plus 320 kb/s (for video).
This sum does not include overhead. If the audio codec for a video call is G.729 (at 24 kb/s), the
video rate increases to maintain a total bandwidth of 384 kb/s.

QUESTION 168
In what Cisco solution is Simple Network-Enabled Auto Provision technology used?

A. Cisco Unified Gateway Duplication

B. Cisco Unified CallManager Redundancy
C. Cisco Unified SRST
D. Cisco Unified Call Survivability

Answer: C
Explanation:
When the system automatically detects a failure, Cisco Unified SRST uses Simple Network Auto
Provisioning (SNAP) technology to auto-configure a branch office router to provide call
processing for the Cisco Unified IP phones that are registered with the router.

QUESTION 169
While configuring Call Survivability in Cisco Unified Communications Manager, what step is
mandatory to reach remote sites while in SRST mode?

A. Enable Cisco Remote Site Reachability.

B. Configure CFUR.
C. Enable the SRST checkbox in the MGCP gateway.
D. Configure the H.323 gateway for SRST in Cisco Unified Communications Manager.
E. Enable the Failover Service parameter.

Answer: B
Explanation:
Call Forward Unregistered (CFUR) functionality provides the automated rerouting of calls through
the PSTN when an endpoint is considered unregistered due to a remote WAN link failure.

QUESTION 170
While operating in SRST, what is needed to route calls outside of the remote site location to the
PSTN?

A. SIP trunk
B. CallManager route patterns
C. translation patterns
D. POTS dial peers
E. VOIP dial peers

Answer: D
Explanation:
in time of srst configuration on router, please configure a dial-peer so that call flow in SRST
mode.

QUESTION 171

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 91
http://www.passleader.com
When using Cisco Unified Communications Manager Express in SRST mode, how many
multicast music on hold streams can be utilized by the system at any given time?

A. 3
B. 6
C. 2
D. 4
E. 1
F. 5

Answer: B

QUESTION 172
To preserve analog calls in an MGCP switchback event, which three commands must be
configured in the MGCP fallback router? (Choose three.)

A. h323
B. mgcp-switchback-graceful
C. voice service voip
D. mgcp-graceful
E. preserve-h323
F. no h225 timeout keepalive

Answer: ACF

QUESTION 173
Which two locations are the best locations that an end user can use to determine if an IP phone is
working in SRST mode? (Choose two.)

A. Cisco Unified Communications Manager Administration

B. IP phone display
C. Cisco Unified SRST Router
D. Cisco Unified MGCP Fallback Router
E. physical IP phone settings

Answer: BE
Explanation:
IP Phone display and Physical phone IP settings are two locations were an end user can
determine if an IP phone is working in SRST mode.

QUESTION 174
What is the fastest way for an engineer to test the implementation of SRST in a production
environment?

A. Shut down the Cisco Unified Communications Manager Servers.

B. Shut down the switch ports connected to the Cisco Unified Communications Manager Servers.
C. Add a null route to the publisher Cisco Unified Communications Manager at the remote router.
Remove the null route when the operation is verified.
D. Unplug the IP phones from their switch ports.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 92
http://www.passleader.com
E. Verification is not needed.

Answer: C

QUESTION 175
Drag and Drop Question

Answer:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 93
http://www.passleader.com
QUESTION 176
You are the Cisco Unified Communications Manager in Certpaper.com.
You use a remote site MGCP gateway to provide redundancy when connectivity to the central
Cisco Unified Communications Manager cluster is lost.
How to enable IP phones to establish calls to the PSTN when they have registered with the
gateway? (Choose three.)

A. POTS dial peers must be added to the gateway to route calls from the IP phones to the PSTN.
B. The default service must be enabled globally.
C. The command ccm-manager mgcp-fallback must be configured.
D. COR needs to be configured to disallow outbound calls.

Answer: ABC

QUESTION 177
Which two configurations provide the best SIP trunk redundancy with Cisco Unified
Communications Manager? (Choose two.)

A. Configure all SIP trunks with DNS SRV

B. Configure all SIP trunks with Cisco Unified Border Element
C. Configure all SIP trunks to point to a SIP gateway
D. Configure SIP trunks to be members of route groups and route lists
E. Configure all SIP trunks to allow TCP ports 5060
F. Configure all SIP trunks to point to a gatekeeper through SIP to H.323 gateway

Answer: AD
Explanation:
For SIP trunks, Cisco Unified Communications Manager supports up to 16 IP addresses for each
DNS SRV and up to 10 IP addresses for each DNS host name. The order of the IP addresses
depends on the DNS response and may be identical in each DNS query. The OPTIONS request
may go to a different set of remote destinations each time if a DNS SRV record (configured on
the SIP trunk) resolves to more than 16 IP addresses, or if a host name (configured on the SIP
trunk) resolves to more than 10 IP addresses. Thus, the status of a SIP trunk may change
because of a change in the way a DNS query gets resolved, not because of any change in the
status of any of the remote destinations.

QUESTION 178
When you configure Cisco Unified Communications Manager, you need to configure the router for
Survivable Remote Site Telephony in case the Cisco Unified Communications Manger stops
working. On which two factors would the number of IP phones and Directory Numbers that can
register to the SRST router depend? (Choose two.)

A. The protocol that is used in Cisco Unified Communications Manager

B. Cisco Unified Communications Manager version
C. Cisco IOS Software version
D. WAN link bandwidth
E. capacity of the Cisco Media Convergence Server
F. router platform

Answer: CF

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 94
http://www.passleader.com
QUESTION 179
Which remote-site redundancy technology fails over to POTS dial peers from the Cisco Unified
Communications Manager dial plan during a WAN failure?

A. MGCP fallback
B. H.323 fallback
C. SCCP fallback
D. SIP fallback

Answer: A

QUESTION 180
How does the system intelligently shift call processing upon restoration of WAN connectivity?

A. automatically back to the primary Cisco Unified Communications Manager cluster

B. manually back to the primary Cisco Unified Communications Manager cluster
C. automatically back to the secondary Cisco Unified Communications Manager cluster
D. manually back to the secondary Cisco Unified Communications Manager cluster

Answer: A

QUESTION 181
Which option configures call preservation for H.323-based SRST mode?

A. voice service voip h323 call preserve

B. call preservation not possible with H.323
C. call-manager-fallback preserve-call
D. dial-peer voice 1 voip call preserve

Answer: A

QUESTION 182
Which configuration command disables the secondary dial tone on the branch office ISR for users
calling from the PSTN into the branch office during a WAN failure?

A. direct-inward-dial
B. voice translation-rule
C. incoming called-number
D. application

Answer: A

QUESTION 183
A Cisco Unified Communications Manager cluster is installed in headquarters only.
How can international calls be blocked while national calls are allowed for branch office Cisco IP
Phones during a WAN failure?

A. Configure CSS and partitions in Cisco Unified Communications Manager and apply the CSS and

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 95
http://www.passleader.com
 partitions to the SRST ISR.
B. Configure CSS and partitions in the SRST ISR.
C. Configure COR in the SRST ISR.
D. Configure voice translations in the SRST ISR.

Answer: C

QUESTION 184
Which command can be used to manually send the MGCP gateway to register with the
secondary Cisco Unified Communications Manager server?

A. ccm-manager switchover-to-backup
B. mgcp use backup
C. ccm-manager register backup
D. not supported

Answer: A

QUESTION 185
This is the configuration on the voice gateway:

telephony-service
max-ephones 30
max-dn 60 preference 0
srst mode auto-provision all
srst dn line-mode dual
srst dn template 3
srst ephone description srst fallback auto-provision phone
srst ephone template 5

Which ephone-dn would be expected upon activation of SRST?

A. ephone-dn 1 dual-line
number 7001
description 7001
name 7001
ephone-dn-template 5
This DN is learned from srst fallback ephones
B. ephone-dn 1 dual-line
number 7001
description 7001
name 7001
ephone-dn-template 3
This DN is learned from srst fallback ephones
C. ephone-dn 1
number 7001
description 7001
name 7001
ephone-dn-template 5
This DN is learned from srst fallback ephones
D. ephone-dn 1
number 7001

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 96
http://www.passleader.com
 description 7001
name 7001
ephone-dn-template 3
This DN is learned from srst fallback ephones

Answer: A

QUESTION 186
Which ability does the Survivable Remote Site Telephony feature provide?

A. a means to allow the local site to continue to send and receive calls in the event of a WAN failure
B. a means to route calls on-net through other sites during high utilization periods
C. a method that allows for backup calls in the event that your gateway fails
D. the ability to force a call out of a certain trunk when the Cisco Unified Communications Manager
is being upgraded

Answer: A

QUESTION 187
What component acts as a user agent for both ends of a SIP call while Cisco Unified SIP SRST is
providing failover during a WAN outage?

A. B2BUA
B. SIP server
C. SIP proxy
D. SIP SRST router
E. SIP registrar

Answer: A

QUESTION 188
Which two configurations are needed to implement SRST in Cisco Unified Communications
Manager? (Choose two.)

A. SRST Gateway setting in Cisco Unified Communications Manager

B. SRST Reference configured in Cisco Unified Communications Manager
C. Device Pool SRST Reference setting
D. Call Manager Group setting
E. Cisco Unified Communications Locations setting

Answer: BC

QUESTION 189
Which of the following are two functions that ensure that the telephony capabilities stay
operational in the remote location Cisco Unified SRST router? (Choose two)

A. Automatically detecting a failure in the network.

B. Initiating a process to provide call-processing backup redundancy.
C. Notifying the administrator of an issue for manual intervention.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 97
http://www.passleader.com
D. Proactively repairing issues in the voice network.

Answer: AB

QUESTION 190
Which three of the following are steps in configuring MGCP Fallback and Cisco Unified SRST?
(Choose three)

A. Define the SRST reference for phones in the Device Pool configuration
B. Enable and configure the MGCP fallback and Cisco Unified SRST features on the IOS gateways.
C. Implement a simplified SRST dial plan on the remote-site-gateways to ensure connectivity for
remote-site phones in SRST mode.
D. Enable SIP trunking between both remote and hub sites to provide mesh coverage.
E. Define the SRST reference in the configuration on the IP Phones.
F. Enable and configure the MGCP fallback on the IOS gateway but not Cisco Unified SRST since it
is enabled automatically.

Answer: ABC

QUESTION 191
Which method can be used to address variable-length dial plans?

A. Overlap sending and receiving.

B. Add a prefix for all calls that are longer than 10-digits long
C. Use nested translation patterns to eliminate inter-digit timeout
D. Use the @macro on the route pattern
E. Use MGCP gateways, which support variable-length dial plans

Answer: A
Explanation:
If the dial plan contains overlapping patterns, Cisco Unified Communications Manager does not
route the call until the interdigit timer expires (even if it is possible to dial a sequence of digits to
choose a current match). Check this check box to interrupt interdigit timing when Cisco Unified
Communications Manager must route a call immediately. By default, the Urgent Priority check
box displays as checked. Unless your dial plan contains overlapping patterns or variable length
patterns that contain!, Cisco recommends that you do not uncheck the check box.

QUESTION 192
Refer to the exhibit. Which trunks would be most suitable for Connection Y?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 98
http://www.passleader.com
A. an H.225 trunk (gatekeeper-controlled)
B. intercluster trunk (gatekeeper-controlled)
C. a SIP trunk on the U.S. cluster and an intercluster trunk on the remote cluster
D. intercluster trunk (nongatekeeper-controlled)
E. No extra connections are required. As long as IP connectivity exists, you need only configure a
route pattern for each site. The Cisco Unified Communications Manager will automatically forward
the calls over the WAN if the destination directory number is not registered locally.

Answer: D

QUESTION 193
Which two features require or may require configuring a SIP trunk? (Choose two.)

A. SIP gateway
B. Call Control Discovery between a Cisco Unified Communications Manager and Cisco Unified
Communications Manager Express
C. Cisco Device Mobility
D. Cisco Unified Mobility
E. registering a SIP phone

Answer: AB
Explanation:
All protocols require that either a signaling interface (trunk) or a gateway be created to accept and
originate calls. Device mobility allows Cisco Unified Communications Manager to determine
whether the phone is at its home location or at a roaming location. Cisco Unified Mobility gives
users the ability to redirect incoming IP calls from Cisco Unified Communications Manager to
different designated phones, such as cellular phones.

QUESTION 194

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 99
http://www.passleader.com
A Cisco 3825 needs to be added in Cisco Unified Communications Manager as an H.323
gateway. What should the gateway type be?

A. H.323 gateway
B. Cisco 3825
C. Cisco 3800 series router. The specific model will be selected after the Cisco 3800 is selected.
D. The gateway can be added either as an H.323 gateway or Cisco 3800 series router.
E. The gateway can be added either as an H.323 gateway or Cisco 3825 series router.

Answer: A

QUESTION 67
When an incoming PSTN call arrives at an MGCP gateway, how does the calling number get
normalized to a global E.164 number with the + prefix in Cisco Unified Communications
Manager?

A. Normalization is done using translation patterns.

B. Normalization is done using route patterns.
C. Normalization is done using the gateway incoming called party prefixes based on number type.
D. Normalization is done using the gateway incoming calling party prefixes based on number type.
E. Normalization is achieved by local route group that is assigned to the MGCP gateway.

Answer: D
Explanation:
Configuring calling party normalization alleviates issues with toll bypass where the call is routed
to multiple locations over the IP WAN. In addition, it allows Cisco Unified Communications
Manager to distinguish the origin of the call to globalize or localize the calling party number for the
phone user.

QUESTION 195
When an incoming PSTN call arrives at an MGCP gateway, how does the called number get
normalized to an internal directory number in Cisco Unified Communications Manager?

A. Normalization is done by configuring the significant digits for inbound calls on the MGCP
gateway.
B. Normalization is done using route patterns.
C. Normalization is done using the gateway incoming called party prefixes based on number type.
D. Normalization is done using the gateway incoming calling party prefixes based on number type.
E. Normalization is achieved by local route group that is assigned to the MGCP gateway.

Answer: A

QUESTION 196
Which process can localize a global E.164 with + prefix calling numbers for inbound calls to an IP
phone so that users see the calling number in a local format?

A. Calling number localization is done using translation patterns.

B. Calling number localization is done using route patterns.
C. Calling number localization is done by configuring a calling party transformation CSS at the
phone.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 100
http://www.passleader.com
D. Calling number localization is done by configuring a calling party transformation CSS at the
gateway.
E. Calling number localization is done by configuring the phone directory number in a localized
format.

Answer: C

QUESTION 197
Refer to the exhibit. The exhibit shows centralized Cisco Unified Communications Manager
configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access
code for the U.K. is 9 and 001 for international calls to the U.S. To match the US-TEHO pattern
\+!, how should the translation pattern be configured?

A. 9001.4085551234 with the Called Party Transformation:

Discard Digits PreDot
Prefix Digits Outgoing Calls: +
B. 9.0014085551234 with the Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: +1
C. 900.14085551234 with the Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: +1
D. 900.14085551234 with the Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: +
E. 001.4085551234 with the Called Party Transformation:
Prefix Digits Outgoing Calls: +

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 101
http://www.passleader.com
Answer: D
Explanation:
The PSTN access code for the UK is 9, International call code is 001, The international escape
character, +, signifies the international access code in a complete E.164 number format.

QUESTION 198
Refer to the exhibit. The exhibit shows centralized Cisco Unified Communications Manager
configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access
code for the U.K. is 9 and 001 for international calls to the U.S. What should the TEHO-US route
list configuration consist of?

A. First route group should point only to the U.K. gateway.

The second route group should point to the U.S. gateway.
B. First route group should be only the local route group.
The second route group should point to the U.S. gateway.
C. First route group should point only to the U.S. gateway.
The second route group should be the local route group.
D. The TEHO-US route list should contain only the local route group.
The globalized configuration means that the appropriate gateway will be selected automatically.
E. The \+! route pattern should point directly to the U.S. gateway.

Answer: C
Explanation:
The route group points to one or more gateways and can choose the gateways for call routing
based on preference. The route group can serve as a trunk group by directing all calls to the
primary device and then using the secondary devices when the primary is unavailable. One or
more route lists can point to the same route group.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 102
http://www.passleader.com
QUESTION 199
Refer to the exhibit. The exhibit shows centralized Cisco Unified Communications Manager
configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access
code for the U.K. is 9 and 001 for international calls to the U.S. Assuming the PSTN does not
accept globalized numbers with + prefix.
What should the Called Party Transformation Pattern at the U.S. gateway be configured as?

A. \+.! with the following Called Party Transformation:

Discard Digits PreDot
Prefix Digits Outgoing Calls: +
B. \+1.! with the following Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: None
C. \+408.! with the following Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: 1
D. \+1408.! with the following Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: None
E. \+1.408! with the following Called Party Transformation:
Discard Digits PreDot
Prefix Digits Outgoing Calls: None

Answer: D

QUESTION 200
Refer to the exhibit. The HQ site uses area code 650. The BR1 site uses area code 408. The long
distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 103
http://www.passleader.com
user dials access code 9, followed by 1, and then the 10-digit number. Both sites use MGCP
gateways. AAR must use globalized call routing using a single route pattern. Assume that all
outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit.
What should the AAR group prefix be?

A. 9
B. 91
C. none
D. +
E. +1

Answer: C

QUESTION 201
Refer to the exhibit. The HQ site uses area code 650. The BR1 site uses area code 408. The long
distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1
user dials access code 9, followed by 1, and then the 10-digit number.
Both sites use MGCP gateways. AAR must use globalized call routing using a single route
pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown
in the exhibit.
Which partition should be configured in the AAR CSS applied at the phones?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 104
http://www.passleader.com
A. PSTN partition
B. LD partition
C. The HQ AAR CSS must include a partition assigned to route pattern 91408XXXXXXX. The BR1
AAR CSS must include a partition assigned to route pattern 91650XXXXXXX.
D. AAR CSS must contain translation pattern 9.1[2-9]XX[2-9]XXXXXX for each site that must be
globalized. Otherwise the called numbers will not be localized at the egress gateway.

Answer: A

QUESTION 202
Refer to the exhibit. The HQ site uses area code 650. The BR1 site uses area code 408. The long
distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1
user dials access code 9, followed by 1, and then the 10-digit number.
Both sites use MGCP gateways. AAR must use globalized call routing using a single route
pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown
in the exhibit.
How many route lists and route groups should be configured for AAR at a minimum?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 105
http://www.passleader.com
A. a single route list with a local route group for each site
B. two route lists and two route groups for each site
C. a single route list and four route groups for each sitea
D. None. The AAR CSS can point directly to the route pattern.

Answer: A

QUESTION 203
Assume a centralized Cisco Unified Communications deployment with the headquarters in the
U.K, and remote site in RTP. All route patterns are assigned a route list that points to the local
route group. Local route groups have been configured on the U.K and RTP device pools. A U.K.
user logs onto an RTP phone using the Cisco Extension Mobility feature and places an
emergency call to 0000. Which statement about the emergency call is true?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 106
http://www.passleader.com
A. The call will match the U.K_Emergency route pattern partition and will egress at the RTP
gateway.
B. The call will match the U.K_Emergency route pattern partition and will egress at the U.K.
gateway.
C. The call will match the RTP_Emergency route pattern partition and will egress at the U.K.
gateway.
D. The call will match the RTP_Emergency route pattern partition and will egress at the RTP
gateway.
E. The call will fail.

Answer: A

QUESTION 204
Refer to the following exhibit. The MGCP gateway has the following configurations:

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 107
http://www.passleader.com
called party transformation CSS HQ_cld_pty CSS (partition=HQ cld_pty.Pt) call.ng party
transformation CSS HQ_clng_pty CSS (partition=HQ_clng_pty Pt)

All translation patterns have the check box "Use Calling Party's External Phone Number Mask"
enabled.

When the IP phone at extension 3001 places a call to 9011 49403021 56001# what is the

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 108
http://www.passleader.com
resulting called and calling number that is sent to the PSTN?

A. The called number is 01 1 49403021 56001.

The calling number will be 5553001 and number type set to subscriber.
B. The called number is 011 49403021 56001.
The calling number will be 5215553001 and number type set to national.
C. The called number is 4940302156001 with number type set to international.
The calling number will be 5215553001 and number type set to national.
D. The called number is +49403021 56001 with number type set to international.
The calling number will be 5215553001 and number type set to subscriber.

Answer: A
Explanation:
Check the check box "Use Calling Party's External Phone Number Mask" if you want the full,
external phone number to be used for calling line identification (CLID) on outgoing calls. You may
also configure an External Phone Number Mask on all phone devices.

QUESTION 205
Refer to the exhibit When the Cisco Unified Communications Manager advertises the Hosted DN
Pattern, which pattern would be advertised?

A. 2XXX and the T0D1D will be 0:+498950555

B. 2XXX and the ToDID will be 0:+4989531 21
C. 4989S05552XXX and the ToDiD will be 0:
D. + 4989631 21 2XXX and the ToDiD will be 0:
E. Both +4989505552XXXand +4989531 21 2XXX will be advertised with ToDID of 0:

Answer: A

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 109
http://www.passleader.com
QUESTION 206
When an external call is placed from Ajax, they would like the ANI that is sent to the PSTN to be
the main number, not the extension. For domestic calls, they would like 10 digits sent; for
international calls, they would like to send the country code 1 and the 10 digits. How can this be
accomplished?

A. Add a translation pattern to the dial peers in the gateway that adds the appropriate digits to the
outgoing ANI.
B. In the external call route patterns, set the external phone number mask to the main number.
Use 10 digits in the domestic route pattern and 1 followed by the main number digits in the
international route patterns.
C. Use a calling party transform mask for each route group in the corresponding route list
configuration. Set the explicit 10-digit main number for domestic calls and 1 followed by the main
number for the international route patterns.
D. In the directory number configurations, set the prefix digits field to the country code and the 10
digits of the main number. This will be truncated to the 10-digit number for domestic calls and
sent out in its entirety for international calls.

Answer: C
Explanation:
calling party transformation mask value is Valid entries for the NANP include the digits 0 through
9; the wildcard characters X, asterisk (*), and octothorpe (#); and the international escape
character +.

QUESTION 207
Which trunk should you use in an H.323 gatekeeper-controlled network?

A. H.323
B. H.225
C. SIP
D. Intercluster
E. MGCP FXO trunk
F. MGCP T1/E1 trunk

Answer: B

QUESTION 208
Which E.164 transformation pattern represents phone numbers in Germany?

A. \+49.!
B. 49.!
C. \49.!
D. \+49.X

Answer: A

QUESTION 209
Which two statements are true regarding the implementation of globalized call-routing in terms of
localized call egress? (Choose two.)

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 110
http://www.passleader.com
A. Calling-party numbers are routed from the gateway or trunks to phones.
B. Called-party numbers are routed from the gateway or trunks to phones.
C. Calling-party numbers of internal calls are routed from the gateway or trunks.
D. Calling-party calls are routed to the gateway and trunks.

Answer: AD

QUESTION 210
Refer to the exhibit. Assume that the HQ phones have access to the HQ partition, and BR phones
have access to the BR partition. Which set of implementations would best address the
overlapping directory number extensions for intersite (WAN) calling between the HQ site and the
BR site?

A. Configure a route pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Configure the
called party DDI of Predot.
Configure a route pattern for site BR 8111.[1-3]XXX, and assign it to partition BR. Configure
called party DDI Predot.
Use the local gateway at each site. Prefix the appropriate site code for the calling number.
B. Configure a single route pattern for both sites 8[12,12,12].[1-32]XXX. Use a route list that
contains the local route group for each site. Prefix the appropriate site code for the calling
number.
C. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition HQ.
Use a CSS that contains the partitions for BR phones.
Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition BR.
Use a CSS that contains the partitions for HQ phones.
For both translation patterns, configure the called party DDI of Predot.
Prefix the appropriate site code for the calling number.
D. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition BR.
Use a CSS that contains the partitions for HQ phones.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 111
http://www.passleader.com
 Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition HQ. Use a
CSS that contains the partitions for BR phones.
For both translation patterns, configure the called party DDI of Predot.
Prefix the appropriate site code for the calling number.

Answer: C

QUESTION 211
What is the difference between an H.323 gateway and a SIP gateway?

A. An H.323 gateway requires that dial peers be configured before PSTN calls can be placed and
received.
The SIP gateway requires no dial peers.
B. The H.323 gateway can be added in Cisco Unified Communications Manager under gateway type
as H.323 Gateway.
The SIP gateway can connect to Cisco Unified Communications Manager only through a SIP
trunk.
C. A SIP gateway requires a call agent for PSTN calls to be placed and received.
An H.323 gateway does not require a call agent for PSTN calls to be placed and received.
D. An H.323 gateway can register with Cisco Unified Communications Manager.
A SIP gateway will show status of "Unknown".
E. The H.323 gateway must be configured in Cisco Unified Communications Manager using a valid
IP address on the gateway.
The SIP gateway must be configured in Cisco Unified Communications Manager using the
domain name.

Answer: B

QUESTION 212
What is the difference between an MGCP gateway and a SIP gateway?

A. An MGCP gateway that dial peers be configured before PSTN calls can be placed and received.
The SIP gateway requires no dial peers.
B. An MGCP gateway can be added in Cisco Unified Communications Manager under the Gateway
Type field using the gateway model. The SIP gateway can connect to Cisco Unified
Communications Manager only through a SIP trunk.
C. A SIP gateway requires a call agent for PSTN calls to be placed and received. An MGCP
gateway does not require a call agent for PSTN calls to be placed and received.
D. An MGCP gateway can register with Cisco Unified Communications Manager. A SIP gateway will
show status of "Unknown".
E. The SIP gateway must be configured in Cisco Unified Communications Manager using a valid IP
address on the gateway. The MGCP gateway must be configured in Cisco Unified
Communications Manager using the domain name.

Answer: B

QUESTION 213
When an incoming PSTN call arrives at an H.323 gateway, how does the calling number get
normalized to a global E.164 number with + prefix in Cisco Unified Communications Manager?

A. Normalization is done using translation patterns.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 112
http://www.passleader.com
B. Normalization is done using route patterns.
C. Normalization is done using the gateway incoming called party prefixes based on number type.
D. Normalization is done using the gateway incoming calling party prefixes based on number type.
E. Normalization is achieved by local route group that is assigned to the H.323 gateway.

Answer: D

QUESTION 214
When an incoming PSTN call arrives at an H.323 gateway, how does the called number get
normalized to an internal directory number in Cisco Unified Communications Manager?

A. Normalization is done by configuring the significant digits for inbound calls on the H.323 gateway
configuration in Cisco Unified Communications Manager.
B. Normalization is done using route patterns.
C. Normalization is done using the gateway incoming calling party prefixes based on number type.
D. Normalization is achieved by local route group that is assigned to the H.323 gateway.

Answer: A

QUESTION 215
Refer to the exhibit. All HQ phones are configured to use HQ_MRGL and all BR phones are
configured to use BR_MRGL. For the HQ phones always to use the hardware conference bridge
as a first choice, which configuration should be implemented?

A. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 113
http://www.passleader.com
 Ensure that the instance ID for the hardware conference bridge is 0.
B. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG.
The hardware conference bridge must be configured first.
C. Assign the hardware conference bridge to HQ_MRG.
Configure a second HQ_MRG_2 and assign the software conference bridge to it.
Add both the HQ_MRG and HQ_MRG_2 to the HQ_MRGL and list the HQ_MRG first.
D. Assign the hardware conference bridge to HQ_MRG.
Configure a second HQ_MRG_2 and assign the software conference bridge to it.
Configure an additional HQ_MRGL_2.
Add the HQ_MRG to HQ_MRGL. Add HQ_MRG_2 to HQ_MRGL_2.
The HQ_MRGL should be assigned to the HQ phones.
The HQ_MRGL_2 should be assigned to the HQ device pool.

Answer: C

QUESTION 216
Refer to the exhibit. HQ_MRGL is assigned to the HQ IP phones. BR_MRGL is assigned to the
BR IP phones. The remote site BR IP phones support only the G.711 codec.
Where should the transcoder reside?

A. The transcoder should reside at the HQ site and assigned to HQ_MRG.

B. The transcoder should reside at the BR site and assigned to BR_MRG.
C. The transcoder should be assigned to its own MRG, which should then be assigned to the default
device pool.
D. A transcoder is not needed. The HQ phones will automatically change over to the G.711 codec.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 114
http://www.passleader.com
Answer: B

QUESTION 217
When configuring intercluster URI dialing, an engineer gets the error message "Local cluster
cannot connect to the ILS network". Which three reasons for this error are true? (Choose three.)

A. The SIP route patterns have not been properly configured.

B. The Tomcat certificates do not match.
C. The Cisco Unified Resource Identifier service needs a restart.
D. The ILS authentication password does not match.
E. The cluster ID does not match.
F. One cluster is using TLS certificate, and the other is using Password.

Answer: BDF

QUESTION 218
Refer to the exhibit. The HQ site uses area code 650. The BR1 site uses area code 408. The long
distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1
user dials access code 9, followed by 1, and then the 10-digit number. Both sites use MGCP
gateways. AAR must use globalized call routing using a single route pattern. Assume that all
outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit. Which
statement is true?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 115
http://www.passleader.com
A. The AAR group system must be configured on the device configuration of the phones.
B. The AAR group system must be configured on the line configuration of the phones.
C. The single AAR group system cannot be used. A second AAR group must be configured in order
to have source and destination AAR groups.
D. The AAR group system must be configured under the AAR service parameters.

Answer: B

QUESTION 219
Refer to the exhibit. Which configuration elements must match for adjacent neighbors to establish
a SAF neighbor relationship?

A. the label name specified in the router eigrp command

B. the autonomous-system number specified in the service-family ipv4 autonomous-system
command
C. the sf-interface configuration
D. the topology base configurations
E. the label name specified in the router eigrp command and the autonomous-system number

Answer: B

QUESTION 220
Refer to the exhibit. What should the destination IP address be configured as on the HQ and BR1
SIP trunks?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 116
http://www.passleader.com
A. The HQ SIP trunk destination IP address should be 10.1.6.10. The BR1 SIP trunk destination IP
address should be 10.1.5.10.
B. The destination IP address is not configurable. Each cluster will learn about the remote trunk IP
address through SAF learned routes.
C. The destination IP address will be learned automatically and configured on the SIP trunks after
the Cisco Unified Communications Managers discover themselves.
D. The HQ SIP trunk destination IP address should be the HQ SAF Forwarder IP address. The BR1
SIP trunk destination IP address should be the BR1 SAF Forwarder IP address.

Answer: B
Explanation:
The gatekeeper changes the IP address of this remote device dynamically to reflect the IP
address of the remote device.

QUESTION 221
Refer to the exhibit. What must be configured on the HQ Cisco Unified Communications Manager
to allow HQ users to dial the SAF learned directory number pattern 3XXX?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 117
http://www.passleader.com
A. Route pattern 3XXX should be configured and made available to HQ users through the phone
CSS.
B. Route pattern 3XXX should be configured and made available to HQ phone users through the
phone AAR CSS.
C. The SAF partition assigned to the SAF learned patterns must be available to the HQ phone users
through the phone CSS.
D. The SAF partition assigned to the SAF learned patterns must be available to the HQ phone users
through the phone AAR CSS.
E. The SAF directory number pattern 3XXX will be made available to all users automatically as soon
as the SAF partition is selected.

Answer: C
Explanation:
By adopting the SAF network service, the call control discovery feature allows Cisco Unified
Communications Manager to advertise itself along with other key attributes.

QUESTION 222
Refer to the exhibit. Which CSS is used at the HQ Cisco Unified Communications Manager to
reroute calls via the PSTN when the SAF network is unavailable?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 118
http://www.passleader.com
A. the phone device CSS
B. the phone line CSS
C. the phone line/device combined CSS
D. the SAF CSS configured on the CCD requesting service
E. the phone AAR CSS configured at the phone device
F. No special CSS is required. If SAF patterns are accessible, the PSTN reroute is automatic.

Answer: E

QUESTION 223
Refer to the exhibit. How does the Cisco Unified Communications Manager advertise dn-block 1?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 119
http://www.passleader.com
A. 4XXX and the ToDID will 0:
B. 4XXX and the ToDID will 0:1972555
C. 4XXX
D. 4XXX and the ToDID will 0:+ 1972555
E. 19725554XXX

Answer: B

QUESTION 224
Refer to the exhibit. How does the Cisco Unified Communications Manager advertise dn-block 2?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 120
http://www.passleader.com
A. 14087071222 with number type international
B. +14087071222 with number type international
C. +14087071222
D. 14087071222

Answer: C

QUESTION 225
Refer to the following exhibit. Which Cisco IOS SAF Forwarder configuration is correct?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 121
http://www.passleader.com
Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 122
http://www.passleader.com
A. Exhibit A
B. Exhibit B
C. Exhibit C
D. Exhibit D

Answer: A

QUESTION 226
Refer to the exhibit. When the Manager places a call to 3001 when the SAF network is down,
what happens?

A. The call fails.

B. The call is rerouted to the PSTN with the constructed PSTN number as +442288223001
C. The call is rerouted to the PSTN with the constructed PSTN number as 442288223001
D. The call is rerouted to the PSTN with the constructed PSTN number as 0002288223001
E. The call is rerouted to the PSTN with the constructed PSTN number as +0002288223001

Answer: A
Explanation:
When the SAF forwarder loses network connection with its call-control entity, the SAF forwarder
withdraws those learned patterns that were published by the call control entity. In this case, CCD
requesting service marks those learned patterns as unreachable via IP, and the calls gets routed
through the PSTN gateway.

QUESTION 227
Refer to the exhibit. The exhibit shows a SAF Forwarder configuration attached to a Cisco Unified
Communications Manager.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 123
http://www.passleader.com
Which minimum configuration for a Cisco Unified Communications Manager Express SAF
Forwarder is needed to establish a SAF neighbor relationship with this SAF Forwarder?

A. router eigrp SAF

i
service-family ipv4 autonomous-system 1
!
topology base
exit-sf-topology
exit-service-family
voice service saf
profile trunkroute 1
session protocol sip interface Loopback1 transport tcp port 5060 !
B. router eigrp SAF
!
service-family ipv4 autonomous-system 1
!
topology base
exit-sf-topology
exit- service-family
!
voice service saf
profile trunk-route 1
session protocol sip interface Loopback1 transport tcp port 5060
!
profile dn-block 1 alias-prefix 1972555
pattern 1 type extension 4xxx
!
profile callcontrol 1
dn-service
trunk-route 1
dn-block 1
dn-block 2
!
channel 1 vrouter SAF asystem 1

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 124
http://www.passleader.com
 subscribe callcontrol wildcarded
publish callcontrol 1
!
C. router eigrp SAF
!
service-family ipv4 autonomous-system 1
!
topology base
exit-sf-topology
exit-service-family
!
D. None of above configurations contain sufficient information.

Answer: C

QUESTION 228
Which Cisco IOS command is used for internal SAF Clients to check SAF learned routes?

A. show eigrp address-family ipv4 saf

B. show voice saf routes
C. show voice saf detail
D. show eigrp service-family ipv4 saf
E. show voice saf dndb all

Answer: E
Explanation:
Router# show voice saf dnDb all
Total no. of patterns in db/max allowed : 1/6000
Patterns classified under dialplans (private/global) : 0/1 Informational/Error stats -
Patterns w/ invalid expr detected while add : 0
Patterns duplicated under the same instance : 0
Patterns rejected overall due to max capacity : 0
Attempts to delete a pattern which is invalid : 0
Last successful DB update @ 2009:12:14 15:42:45:967

QUESTION 229
What are the two tasks that you must perform to configure the Service Advertisement Framework
forwarder in Cisco Unified Communications Manager? (Choose two.)

A. create VPN groups

B. create VPN profiles
C. create a new Service Advertisement Framework security profile
D. set feature configuration parameters of Call Control Discovery
E. configure Service Advertisement Framework forwarder information
F. enable enterprise parameter for Service Advertisement Framework forwarder

Answer: CE

QUESTION 230
You are entering the description for the Service Advertisement Framework forwarder.
Which three characters should you avoid entering in the description? (Choose three.)

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 125
http://www.passleader.com
A. <>
B. &
C. %
D. #
E. $
F. @

Answer: ABC

QUESTION 231
In a cluster-wide deployment, what is the maximum number of Service Advertisement Framework
forwarders to which the Cisco Unified Communications Manager can connect?

A. 1
B. 2
C. 3
D. 4
E. 6
F. as many as are configured

Answer: B

QUESTION 232
Which two actions are performed by the Call Control Discovery service after the local Cisco
Unified Communications Manager loses its TCP connection with the primary and secondary
Service Advertisement Framework? (Choose two.)

A. Calls are routed to the PSTN gateway after the Call Control Discovery Learned Pattern IP
Reachable Duration parameter expires.
B. All learned patterns are purged from the local cache after the Call Control Discovery PSTN
Failover Duration parameter expires.
C. The Service Advertisement Framework forwarder contacts all the remaining Service
Advertisement Framework forwarders in the cluster.
D. All the remaining Service Advertisement Framework forwarders are notified for their learned
patterns.
E. The Cisco Unified Communications Manager establishes a connection with the primary and
secondary Service Advertisement Framework after the Learned Pattern IP Reachable Duration
parameter expires.
F. Call Control Discovery immediately redirects all the calls to the PSTN gateway based on the
learned patterns.

Answer: AB

QUESTION 233
Which minimum configuration is needed for the SAF Internal Client to register with this SAF
Forwarder?

A. router eigrp SAF

!

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 126
http://www.passleader.com
 service-family ipv4 autonomous-system 1
!
topology base
exit-sf-topology
exit-service-family
!
voice service saf
profile trunk-route 1
session protocol sip interface Loopbackl transport tcp port 5060 i
B. router eigrp SAF
!
service-family ipv4 autonomous-system 1
!
topology base
exit-sf-topology
exit-service-family
!
voice service saf
profile trunk-route 1
session protocol sip interface Loopbackl transport tcp port 5060 !
profile dn-block 1 alias-prefix 1972555
pattern 1 type extension 4xxx
!
profile callcontrol 1
dn-service
trunk-route 1
dn-block 1
dn-block 2
i
C. router eigrp SAF
!
service-family ipv4 autonomous-system 1
!
topology base
exit-sf-topology
exit-service-family
!
voice service saf
profile trunk-route 1
session protocol sip interface Loopbackl transport tcp port 5060 !
profile dn-block 1 alias-prefix 1972555
pattern 1 type extension 4xxx
!
profile callcontrol 1
dn-service
trunk-route 1
dn-block 1
dn-block 2
!
channel 1 vrouter SAF asystem 1
subscribe callcontrol wildcarded
publish callcontrol 1
i
D. router eigrp SAF
!

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 127
http://www.passleader.com
 service-family ipv4 autonomous-system 1
!
topology base
exit-sf-topology
exit-service-family
!
voice service saf
!
channel 1 vrouter SAF asystem 1
E. router eigrp SAF
!
service-family ipv4 autonomous-system 1
!
topology base exit-sf-topology
exit-service-family i

Answer: A

QUESTION 234
Refer to the exhibit. When a user presses a speed dial to +442079460255 when the SAF network
is down, which event should occur?

A. The call will reroute via the PSTN with the constructed PSTN number as 442079460255.
B. The call will reroute via the PSTN with the constructed PSTN number as +442079460255.
C. The call will reroute via the PSTN with the constructed PSTN number as 00442079460255.
D. The call will fail because the ToDID is 0:.
E. The call will fail because the called number will be 2079460255.

Answer: B

QUESTION 235
What is the purpose of a SAF Client?

A. To decode address information and route calls to and from the end points
B. To pass IP information from the CUCM to the endpoint
C. To learn about and advertise or subscribe information about SAF network services
D. To reside in the Cisco IOS software, and to communicate with the SAF forwarder

Answer: C

QUESTION 236
Which two options for a Device Mobility-enabled IP phone are true? (Choose two.)

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 128
http://www.passleader.com
A. The phone configuration is not modified.
B. The roaming-sensitive parameters of the current (that is, the roaming) device pool are applied.
C. The user-specific settings determine which location-specific settings are downloaded from the
Cisco Unified Communications Manager device pool.
D. If the DMGs are the same, the Device Mobility-related settings are also applied.

Answer: BD

QUESTION 237
When Cisco Extension Mobility is implemented, which CSS is used for calling privileges?

A. The user device profile line CSS combined with the device CSS of the physical phone used to log
in the extension mobility user.
B. The user device profile device CSS combined with the line CSS of the physical phone used to log
in the extension mobility user.
C. Only the user device profile device CSS is used.
D. The combined line/device CSS of the physical phone is used to log in the extension mobility user.
E. The combined line/device CSS of the user device profile.

Answer: A

QUESTION 238
When multiple Cisco Extension Mobility profiles exist, which actions take place when a user tries
to log in to Cisco Extension Mobility?

A. The login will fail because only a single Cisco Extension Mobility profile is allowed.
B. The user must select the desired profile.
C. The user must login to both profiles in the order they are presented.
D. The user may login to both profiles in any order.
E. Login will only be allowed to multiple profiles if the service parameter Allow Multiple Logins is
enabled.

Answer: B
Explanation:
Users access Cisco Extension Mobility by pressing the Services or Applications button on a Cisco
Unified IP Phone and then entering login information in the form of a Cisco Unified
Communications Manager UserID and a Personal Identification Number (PIN). If a user has more
than one user device profile, a prompt displays on the phone and asks the user to choose a
device profile for use with Cisco Extension Mobility.

QUESTION 239
When Cisco Extension Mobility is implemented, how is the audio source for the MOH selected?

A. The audio source that is configured at the user device profile is selected.
B. The audio source that is configured at the home phone of the user is selected.
C. The audio source that is configured at the physical phone used for the Cisco Extension Mobility
login is selected.
D. The audio source that is configured in the IP Voice Media Streaming parameters is selected.

Answer: A

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 129
http://www.passleader.com
Explanation:
To specify the audio source that plays when a user initiates a hold action, choose an audio
source from the User Hold MOH Audio Source drop-down list box from device profile
configuration settings.

QUESTION 240
Refer to the exhibit. With the Mobile Connect feature configured, when the PSTN phone calls the
Enterprise user at extension 3001, the Enterprise user's mobile phone does not ring. Which CSS
is responsible for ensuring that the correct partitions are accessed when calls are sent to the
Enterprise user's mobile phone?

A. the gateway CSS

B. the Phone Device CSS
C. the Remote Destination Profile CSS
D. the Remote Destination Profile Rerouting CSS
E. the Phone Line (DN)CSS

Answer: D
Explanation:
Ensure that the gateway that is configured for routing mobile calls is assigned to the partition that
belongs to the Rerouting Calling Search Space. Cisco Unified Communications Manager
determines how to route calls based on the remote destination number and the Rerouting Calling
Search Space.

QUESTION 241
You have been asked to deploy Cisco Extension Mobility Cross Cluster for a distributed call
processing environment. During the initial extension mobility login request, how does the visiting
cluster determine if the user is a local user or a remote user?

A. by using a third-party automatic provisioning tool to verify user ID

B. by broadcasting a request to all clusters to verify the user type
C. from user IDs that are created by default when the user logs in
D. by using Extension Mobility Cross Cluster Session Initiation Protocol (SIP) trunks

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 130
http://www.passleader.com
E. by verifying against the local database
F. by verifying the visiting Trivial File Transfer Protocol

Answer: E

QUESTION 242
Which two entities could be represented by device mobility groups? (Choose two.)

A. countries
B. regions
C. directory numbers
D. transcoders

Answer: AB

QUESTION 243
With Cisco Extension Mobility, when a user logs in to a phone type which has no user device
profile, what will happen to the phone?

A. The phone takes on the default clusterwide device profile.

B. The phone creates a new device profile automatically.
C. The phone immediately logs the user off.
D. The phone crashes and reboots.

Answer: A

QUESTION 244
In a Centralized Call processing architecture, you have deployed Extension Mobility (EM) feature.
After the deployment of EM, when one of the end-users tries to login to the IP phone, the Error 25
is displayed on the screen. What three things should you do to resolve this issue? (Choose
three.)

A. upgrade the firmware of the IP Phone to the latest version

B. activate EM feature service under Cisco Unified Serviceability
C. associate EM Device profile with the end-user
D. subscribe the MAC address of the IP Phone to EM Service
E. update EM Phone Service URL to point to the publisher
F. subscribe device profile to EM phone service in case the enterprise subscription of EM Service is
disabled

Answer: BCD

QUESTION 245
Refer to the exhibit. When a call between two HQ users is being conferenced with a remote user
at BR, which configuration is needed?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 131
http://www.passleader.com
A. The BR_MRG must contain the transcoder device.
The BR_MRGL must be assigned to the BR phones.
B. The HQ_MRG must contain the transcoder device.
The HQ_MRGL must be assigned to the HQ phones.
C. A transcoder should be configured at the remote site and assigned to all remote phones through
the BR_MRGL.
D. The HQ_MRG must contain the transcoder device.
The HQ_MRGL must be assigned to the software conference bridge.
E. Enable the software conference bridge to support the G.711 and G.729 codecs in Cisco Unified
Communications Manager Service Parameters.

Answer: D

QUESTION 246
Refer to the exhibit. All HQ phones are configured to use HQ_MRGL and all BR phones are
configured to use BR_MRGL. For the HQ phones always to use the hardware conference bridge
as a first choice, which configuration should be implemented?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 132
http://www.passleader.com
A. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG.
Ensure that the instance ID for the hardware conference bridge is 0.
B. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG.
The hardware conference bridge must be configured first.
C. Assign the hardware conference bridge to HQ_MRG.
Configure a second HQ_MRG_2 and assign the software conference bridge to it.
Add both the HQ_MRG and HQ_MRG_2 to the HQ_MRGL and list the HQ_MRG first.
D. Assign the hardware conference bridge to HQ_MRG.
Configure a second HQ_MRG_2 and assign the software conference bridge to it.
Configure an additional HQ_MRGL_2.
Add the HQ_MRG to HQ_MRGL.
Add HQ_MRG_2 to HQ_MRGL_2.
The HQ_MRGL should be assigned to the HQ phones.
The HQ_MRGL_2 should be assigned to the HQ device pool.

Answer: C
Explanation:
To ensure that the hardware bridge is utilized first with all its resources BEFORE the software
bridge is used ... you need to have two separate MRG's and list the hardware MRG 1st in the
MRGL ...

QUESTION 247
Refer to the exhibit. Assuming the regions configuration to BR only permits G.729 codec, how
many calls are allowed for the BR location?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 133
http://www.passleader.com
A. Total of four calls; two incoming and two outgoing.
B. Total of two calls in either direction.
C. Total of four calls to the BR location. Outgoing calls are not impacted by the location
configuration.
D. Total of four calls in either direction.
E. Two outgoing calls. Incoming calls are unlimited.

Answer: D
Explanation:
In performing location bandwidth calculations for purposes of call admission control, Cisco Unified
Communications Manager assumes that each G.729 call stream consumes 24 kb/s amount of
bandwidth.

QUESTION 248
Refer to the exhibit. How many calls are permitted by the RSVP configuration?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 134
http://www.passleader.com
A. one G.711 call
B. two G.729 calls
C. one G.729 call and one G.711 call
D. eight G.729 calls
E. four G.729 calls

Answer: B

QUESTION 249
Refer to the exhibit. To permit three G.729 calls, what should the bandwidth value be for the ip
rsvp bandwidth command?

A. 32
B. 48
C. 64
D. 88
E. 128

Answer: D

QUESTION 250
Refer to the exhibit. The HQ Cisco Unified Communications Manager has been configured for
end-to-end RSVP.
The BR Cisco Unified Communications Manager has been configured for local RSVP.
RSVP between the locations assigned to the IP phones and SIP trunks at each site are
configured with mandatory RSVP. When a call is placed from the IP phone at HQ to the BR
phone at the BR site, which statement is true?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 135
http://www.passleader.com
A. The Cisco Unified Communications Manager at HQ will fall back to local RSVP and place the call.
No RSVP end-to-end will occur.
B. RSVP end-to-end will occur.
C. The Cisco Unified Communications Manager at HQ will use end-to-end RSVP.
The BR Cisco Unified Communications Manager will use local RSVP.
D. The call will fail.
E. The call will proceed as a normal call with no RSVP reservation.

Answer: D
Explanation:
A possible cause is that the same router is being used as the calling and called RSVP agents,
and that router is not running the latest IOS version, which supports loopback on RSVP
reservation. Make sure that the router is running the latest IOS version.

QUESTION 251
Refer to the exhibit. Which statement about the configuration between the Default and BR regions
is true?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 136
http://www.passleader.com
A. Calls between the two regions can use either 64 kbps or 8 kbps.
B. Calls between the two regions can use only the G.729 codec.
C. Only 64 kbps will be used between the two regions because the link is "lossy".
D. Both codecs can be used depending on the loss statistics of the link.
When lossy conditions are high, the G.711 codec will be used.

Answer: B

QUESTION 252
Which statement about H.323 Gatekeeper Call Admission Control is true?

A. Gatekeeper Call Admission Control applies to centralized Cisco Unified Communications

deployments that use locations based Call Admission Control.
B. Gatekeeper Call Admission Control applies to distributed Cisco Unified Communications
deployments.
C. Gatekeeper Call Admission Control applies only to distributed Cisco Unified Communications
Express deployments.
D. Gatekeeper Call Admission Control setting is configured in Cisco Unified Communications
Manager.

Answer: B
Explanation:
in distributed call processing deployments on a simple hub-and-spoke topology, you can
implement call admission control with a Cisco IOS gatekeeper. In this design, the call processing
agent (which could be a Unified CM cluster, Cisco Unified Communications Manager Express
(Unified CME), or an H.323 gateway) registers with the Cisco IOS gatekeeper and queries it each
time the agent wants to place an IP WAN call.

QUESTION 253
Refer to the exhibit. How many calls can be placed to Cluster B?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 137
http://www.passleader.com
A. three G.729 calls
B. one G.711 call
C. one G.711 and three G.729 calls
D. There is no limit for incoming calls to Cluster B.
Outgoing calls are limited to one G.711 and three G.729 calls.

Answer: A

QUESTION 254
Refer to the exhibit. You have configured transcoder resources in both an IOS router and a Cisco
Unified Communications Manager. When you review the configurations in both devices the IP
addresses and transcoder names are correct, but the transcoder is failing to register with the
Cisco Unified Communications Manager.
Which command needs to be edited to allow the transcoder to register properly?

A. The associate profile and dsp farm profile numbers need to match associate ccm 2 command.
B. The associate ccm 2 priority 1 command needs to be changed so the ccm value matches
identifier 1 in the sccp ccm 10.1.1.1 command.
C. The sccp ccm group number needs to match the associate ccm 2 command.
D. The maximum sessions command must match the number of codecs configured under the dsp
farm profile.
E. The sccp ccm group number must match the voice-card number.

Answer: B

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 138
http://www.passleader.com
Explanation:
The value of the IP address should match the IP address in the ip source-address command.

QUESTION 255
If your IP telephony administrator asks you to configure a local zone for your dial plan to control
the volume of calls between two end points in a centralized multisite environment, which two
types of Call Admission Control can be implemented? (Choose two.)

A. locations based
B. automated alternate routing
C. gatekeeper based
D. SRST
E. Cisco Unified Communications Manager based

Answer: AB
Explanation:
Location-based call admission control (CAC) manages WAN link bandwidth in Cisco Unified
Communications Manager. Automated alternate routing (AAR) provides a mechanism to reroute
calls through the PSTN or other network by using an alternate number.

QUESTION 256
Which statement is correct about AAR?

A. The end users sees, "Network Congestion Rerouting?" but AAR is otherwise transparent to the
end user and works without user intervention.
B. AAR will display "not enough bandwidth" on the IP phone while it reroutes the call.
C. AAR allows calls to be rerouted because of insufficient Cisco Unified Border Element controlled
bandwidth to an ITSP.
D. AAR allows calls to be rerouted due to insufficient gatekeeper controlled IP WAN bandwidth.

Answer: A
Explanation:
Automated alternate routing (AAR) provides a mechanism to reroute calls through the PSTN or
other network by using an alternate number when Cisco Unified Communications Manager blocks
a call due to insufficient location bandwidth. With automated alternate routing, the caller does not
need to hang up and redial the called party.

QUESTION 257
Refer to the exhibit. A user in RTP calls a phone in San Jose during congestion with Call Forward
No Bandwidth (CFNB) configured to reach cell phone 4085550150. The user in RTP sees the
message "Not Enough Bandwidth" on their phone and hears a fast busy tone.
Which two conditions can correct this issue? (Choose two.)

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 139
http://www.passleader.com
A. The calling phone (RTP) needs to have AAR Group value of AAR under the AAR Settings.
B. The called phone (San Jose) needs to have AAR Group value of AAR under the AAR Settings.
C. The calling phone (RTP) needs to have the AAR destination mask of 914085550150 configured
under the AAR Settings.
D. The calling phone (RTP) needs to have the AAR destination mask of 4085550150 configured
under the AAR Settings.
E. The called phone (San Jose) needs to have the AAR destination mask of 914085550150
configured under the AAR Settings.
F. The called phone (San Jose) needs to have the AAR destination mask of 4085550150 configured
under the AAR Settings.

Answer: BF
Explanation:
Automated alternate routing (AAR) provides a mechanism to reroute calls through the PSTN or
other network by using an alternate number when Cisco Unified Communications Manager blocks
a call due to insufficient location bandwidth. With automated alternate routing, the caller does not
need to hang up and redial the called party.

QUESTION 258
Which two statements describe RSVP-enabled locations-based CAC? (Choose two.)

A. RSVP can be enabled selectively between pairs of locations.

B. Using RSVP for CAC simply allows admitting or denying calls based on a logical configuration
that is ignoring the physical topology.
C. RSVP is topology aware, but only works with full mesh networks.
D. An RSVP agent is a Media Termination Point that the call has to flow through.
E. RSVP and RTP are used between the two endpoints.

Answer: AD
Explanation:
The RSVP policy that is configured for a location pair overrides the default interlocation RSVP
policy that configure in the Service Parameter Configuration window. RSVP supports audio,
video, and data pass-through. Video data pass-through allows video and data packets to flow
through RSVP agent and media termination point devices

QUESTION 259
You are deploying a remote office setup that connects with Cisco Unity Communications
Manager at a hub location. You have an available dedicated bandwidth of 20% from the 2-Mb/s

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 140
http://www.passleader.com
WAN circuit for VoIP that supports a maximum of 17 calls.
Which codec do you configure in Cisco Unity Communications Manager to achieve this?

A. G.722
B. G.711
C. G.729
D. iSAC
E. GSM-FR
F. iLBC

Answer: C

QUESTION 260
How do RSVP-enabled locations differ from Cisco Unified Communications Manager locations?

A. RSVP is configured in the ISR independent of Cisco Unified Communications Manager.

B. RSVP enables AAR within Cisco Unified Communications Manager.
C. RSVP is topology aware.
D. RSVP is configured in Cisco Unified Communications Manager independent of the ISR.

Answer: C

QUESTION 261
What happens if location-based CAC is used and there is no bandwidth available when a remote
caller is placed on hold?

A. Cisco Unified Communications Manager sends TOH rather than MOH.

B. Cisco Unified Communications Manager terminates the call.
C. Cisco Unified Communications Manager plays default MOH.
D. Cisco Unified Communications Manager attempts to reconnect the call immediately.

Answer: A

QUESTION 262
On which Cisco Unified Communications Manager configuration parameter does the CODEC that
a Cisco IP Phone uses for a call depend?

A. enterprise parameters
B. media resources
C. physical location
D. region
E. location

Answer: D

QUESTION 263
In a Cisco Unified Communications Manager centralized call processing model, what is the best
CAC method recommended for this type of deployment?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 141
http://www.passleader.com
A. QoS-based
B. location-based
C. RSVP-based
D. region-based
E. gateway-based
F. gatekeeper-based

Answer: B

QUESTION 264
Which action configures phones in site A to use G.711 to site B but to use G.729 to site C?

A. Configure Cisco Unified Communications Manager regions.

B. Configure Cisco Unified Communications Manager locations.
C. Configure transcoder resources in Cisco Unified Communications Manager.
D. Configure a gatekeeper.

Answer: A

QUESTION 265
When you configure regions in a Cisco Unified Communications Manager multisite cluster, which
two are ways to prevent G.722 from being advertised in the cluster? (Choose two.)

A. modify the service parameter

B. modify the enterprise parameter
C. modify the device pool
D. modify the line settings

Answer: AB

QUESTION 266
Which action configures the registration of transcoder resources?

A. Cisco IOS software registers transcoder resources with SIP.

B. Cisco IOS software registers transcoder resources with SCCP.
C. Cisco IOS software registers transcoder resources with H.323.
D. Cisco IOS software does not register transcoder resources.

Answer: B

QUESTION 267
Which option describes the reason that transcoding resources are added in Cisco Unified
Communications Manager?

A. to enable transcoding resources in a Cisco Unified Communications Manager server

B. to enable Cisco Unified Communications Manager to select the optimal single codec for end-to-
end calls
C. to enable transcoding resources in Cisco IP Phones

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 142
http://www.passleader.com
D. to provide transcoding resources in Cisco IOS gateways to Cisco Unified Communications
Manager

Answer: D

QUESTION 268
Which action configures transcoding resources in Cisco Unified Communications Manager to
function with branch office Cisco IP Phones?

A. Configure the branch office IP phones with CSS and partitions.

B. Configure the branch office IP phones with MRGs and MRGLs.
C. Configure the branch office IP phones with regions.
D. Configure the branch office IP phones with locations.

Answer: B

QUESTION 269
What is the purpose of configuring a hardware-based MTP when deploying Cisco Unified
Communications Manager?

A. to allow for supplementary services such as hold, transfer, and conferencing

B. when you need support for up to 24 MTP sessions on the same server and 48 on a separate
server
C. when you need the ability to grow support by using DSPs
D. when you want to only use Cisco Unified Communications Manager resources

Answer: C

QUESTION 270
Which two options are effective mechanisms to restrict the maximum number of voice calls on a
WAN link? (Choose two.)

A. Configure a gatekeeper with an SIP trunk.

B. Configure a gatekeeper and a gatekeeper-controlled trunk in Cisco Unified Communications
Manager with bandwidth control.
C. Configure Cisco Unified Communications Manager regions.
D. Configure Cisco Unified Communications Manager locations.

Answer: BD

QUESTION 271
Which action configures CAC utilizing only Cisco Unified Communications Manager software?

A. Configure Cisco Unified Communications Manager regions.

B. Configure Cisco Unified Communications Manager locations.
C. Configure Cisco Unified Communications Manager RSVP-enabled locations.
D. Configure Cisco Unified Communications Manager MTPs.

Answer: B

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 143
http://www.passleader.com
QUESTION 272
Which bandwidth amounts are correct for configuring locations?

A. 8 kb/s for G.729, 64 kb/s for G.711, and 64 kb/s for G.722
B. 8 kb/s for G.729, 64 kb/s for G.711, and 16 kb/s for G.722
C. 64 kb/s for G.729, 64 kb/s for G.711, and 64 kb/s for G.722
D. 8 kb/s for G.729, 8 kb/s for G.711, and 8 kb/s for G.722

Answer: A

QUESTION 273
Which action configures AAR to route the calls that have been rejected by the gatekeeper CAC
through the PSTN?

A. Configure Cisco IP Phones for AAR.

B. Configure AAR to work with SRST.
C. Configure AAR to work with CTI route points.
D. This configuration is not possible using AAR.

Answer: D

QUESTION 274
What is a prerequisite of AAR deployment?

A. You must have a single distributed call processing deployment.

B. Calls must be manually rerouted through the PSTN or other networks when Cisco Unified
Communications Manager blocks a call due to insufficient location bandwidth.
C. Calls must be automatically rerouted through the PSTN or other networks when Cisco Unified
Communications Manager blocks a call due to insufficient location bandwidth.
D. Clustering must be implemented over the WAN.
E. You must have a centralized call processing deployment.

Answer: E

QUESTION 275
How is the region assigned to a device such as an IP phone?

A. Regions are assigned directly in the device configuration page.

B. Regions can be assigned only through a device pool.
C. Regions can be assigned either directly on the device configuration page or through the device
pool.
If both configurations exist, the device pool region configuration takes precedence.
D. Regions can be assigned either directly on the device configuration page or through the device
pool.
If both configurations exist, the device region configuration takes precedence.

Answer: B

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 144
http://www.passleader.com
QUESTION 276
How can the location setting be modified to resolve poor call quality?

A. No adjustment to location setting is needed

B. Mark the bandwidth between the locations as unlimited
C. Decrease the audio bandwidth setting
D. Remove the audio bandwidth setting

Answer: C

QUESTION 277
Cisco Unified border element is configured to support RSVP-based CAC.
When is the RSVP path and reservation message sent and received?

A. Immediately after the call setup message is received and the reservation message is received
after H.245 capabilities negotiation is completed.
B. The path and reservation messages are sent and received after the H.245 capabilities negotiation
is completed.
C. The path and reservation messages are sent and received immediately after the call setup
message is received.
D. The path is setup once the global command call rsvp-sync is configured.

Answer: C

QUESTION 278
Company A has deployed a VCS Control and is attempting to register a third-party endpoint.
The engineer has confirmed that no traffic is being blocked for the endpoint and it is receiving a
valid IP address. Which option could be the cause of this registration failure?

A. Third-party endpoints are not compatible with VCS Control, only with VCS Expressway.
B. Cisco Unified Communications Manager is required in addition to the VCS Control.
C. An incorrect SIP domain is configured on the VCS Control for the endpoint.
D. The VCS Control must be deployed together with VCS Expressway before endpoints can register
to either one.

Answer: C

QUESTION 279
How many active gatekeepers can you define in a local zone?

A. 1
B. 2
C. 5
D. 10
E. 15
F. unlimited

Answer: A

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 145
http://www.passleader.com
QUESTION 280
You recently implemented call redundancy at a new remote site, and users report that calls are
dropped when the remote site supposedly is in SRST.
Which two actions must you take to troubleshoot the problem? (Choose two.)

A. Confirm that SRST is configured on the voice gateway.

B. Confirm that the site has an SRST reference that is correctly associated with the Cisco Unified
Communications Manager group.
C. Confirm that a calling search space is assigned to the voice gateway in Cisco Unified
Communications Manager.
D. Confirm that the site devices are associated with a Cisco Unified Communications Manager group
and that four Cisco Unified Communications Manager servers are available.
E. Check the Region settings in Cisco Unified Communications Manager.
F. Restart Cisco Unified Communications Manager services to confirm that the server is working
correctly.

Answer: AB

QUESTION 281
Which three tests can you perform to verify redundancy in the customer environment? (Choose
three.)

A. Verify that all phones are registered to a second subscriber server.

B. Verify that media resources fail over to a secondary subscriber server when the publisher fails.
C. Verify that Cisco Unified IP phones running SCCP go into SRST mode when the WAN connection
is disconnected.
D. Verify that HSRP is active on the Cisco Unified Communications Manager subscriber servers.
E. Verify that the H.323 redundant connection is active.
F. Verify that SCCP fallback is configured in Cisco Unified Communications Manager.

Answer: ABC

QUESTION 282
Which symbol is required for globalized call routing?

A. +
B. *
C. %
D. /
E. ;

Answer: A

QUESTION 283
Which three steps configure Cisco Unified Survivable Remote Site Telephony for SIP phones?
(Choose three.)

A. Configure a phone NTP reference.

B. Configure an SRST reference.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 146
http://www.passleader.com
C. Configure the SIP registrar.
D. Configure voice register global dn.
E. Configure voice register pool.
F. Configure telephony service.

Answer: BCE

QUESTION 284
Company X has deployed a VCS Control with a local zone and a traversal client zone.
To facilitate external calls, VCS Expressway is deployed and traversal server zone is set up
there. Video endpoints inside Company X have registered but are unable to receive calls from
outside endpoints. Which option could be the cause of this issue?

A. The access control list on the VCS Control must be updated with the IP for the external users.
B. When a traversal zone is set up on VCS Control only outbound calls are possible.
C. The local zone on the VCS Control does not have a search rule configured.
D. The traversal zone on the VCS Control does not have a search rule configured.

Answer: D

QUESTION 285
When considering Extension Mobility, what happens if a user logs into a phone for which the user
does not have a user device profile?

A. The phone reboots with an error.

B. If a default device profile for this phone has been configured, it is loaded.
C. The user cannot log in.
D. Another user device profile is loaded.

Answer: B

QUESTION 286
The network administrator at Enterprise X is creating the guidelines for a new IPT deployment
consisting of a large number of remote offices. Every user within Enterprise X is assigned a
directory number of 5 digits. Which option might cause an issue in a multisite deployment?

A. Overlapping DID ranges are allocated to each site.

B. The maximum number of IP phones are in use at each remote site.
C. MoH cannot be provided for the remote sites.
D. All media streams are necessarily routed through the central office for calls to establish correctly.

Answer: A

QUESTION 287
Which three options are supplementary services that are affected by MTP? (Choose three.)

A. Call Hold
B. Call Transfer
C. Call Park

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 147
http://www.passleader.com
D. Call Pickup
E. Speed Dial
F. Call Back

Answer: ABC

QUESTION 288
Which two configurable options are available to enable Early Offer for calls over a Cisco Unified
Communications Manager SIP trunk? (Choose two.)

A. No Media Termination Point Required

B. Media Termination Point Required
C. Accept Audio Codec Preferences in Received Offer
D. Early Offer support for voice and video calls Mandatory (insert MTP if needed)
E. Use Trusted Relay Point

Answer: BD

QUESTION 289
Which option best describes a service that assembles a network model from configured locations
and link data in one or more clusters?

A. LBM
B. Weight
C. LBM Hub
D. Shadow

Answer: A

QUESTION 290
In the case of a VCS cluster, which configuration element is recommended for endpoint H.323
registration?

A. DNS SRV records pointing to the VCS cluster name

B. static IP addresses
C. hostname of the VCS cluster configuration master
D. hostname of the VCS cluster member peer

Answer: A

QUESTION 291
Which three options are overlapping parameters for roaming when a device is configured for
Device Mobility? (Choose three.)

A. MRGL
B. location
C. network locale
D. codec
E. extension

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 148
http://www.passleader.com
F. device pool

Answer: ABC

QUESTION 292
Which two options are requirements for deploying an H.323 gateway with Cisco Unified
Communications Manager? (Choose two.)

A. Cisco Unified Communications Manager and the H.323 gateway must be configured use the
same TCP port for H.323 calls.
B. The H.245TCSTimeout timer must be set to at least 25.
C. Cisco voicemail ports must be active.
D. The Media Exchange Interface Capability Timer must be set to less than 20.
E. The Media Exchange Timer must be set to less than 20.

Answer: AB

QUESTION 293
In which two locations can you verify that a phone has a standby Cisco Unified Communications
Manager? (Choose two.)

A. RTMT
B. phone menu
C. Cisco Unified Serviceability
D. phone webpage

Answer: BD

QUESTION 294
The administrator at Company X is trying to set up Extension Mobility and has done these steps:

- Set up end users accounts for the users who need to roam
- Set up a device profile for the type of phones users will be allowed
to log in

Users have reported to the administrator that they are unable to log in to the phones designated
for Extension Mobility. Which two options are the two reasons for this issue? (Choose two.)

A. The user device profile is not associated to the correct end user.
B. The username must be numeric only and must match the DN.
C. The Extension Mobility service has not been enabled under the Cisco Unified Serviceability Page.
D. Extension Mobility has not been enabled under Enterprise Parameters.
E. The user must ensure that their main endpoint is online and registered, otherwise they cannot log
in elsewhere.

Answer: AC

QUESTION 295
When configuring a video ISDN gateway, which two actions are requirements for the Cisco

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 149
http://www.passleader.com
Preferred Architecture for Enterprise Collaboration? (Choose two.)

A. Use SIP instead of H.323.

B. Perform dial string manipulation on Cisco Unified Communications Manager.
C. Use an * (asterisk) at the end of each ISDN number, as a suffix.
D. Use an ! (exclamation point) at the end of each ISDN number, as a suffix.
E. Use H.323 instead of SIP.

Answer: AB

QUESTION 296
Company X has three locations connected via a low bandwidth WAN.
Which two configurations are required in the Cisco Unified Communications Manager regions to
provide the most suitable use of bandwidth while preserving the call quality? (Choose two.)

A. g729 codec for intraregion calling

B. g722/g711 codec for interregion calling
C. g729 codec for interregion calling
D. g722/g711 for intraregion calling
E. g729 codec for all calling
F. g722/g711 codec for all calling

Answer: CD

QUESTION 297
Which two options must be selected in the SIP Trunk Security Profile configuration between
Cisco Unified Communications Manager and Expressway? (Choose two)

A. Enable application-level authorization

B. Accept presence subscription
C. Accept out-of-dialog refer
D. Accept unsolicited notification
E. Accept replaces header
F. Transmit security status
G. Allow charging header

Answer: DE

QUESTION 298
Which two configurations can you perform to allow Cisco Unified Communications Manager SIP
trunks to send an offer in the INVITE? (Choose two.)

A. Enable the Media Termination Point Required option on the SIP trunk.
B. Enable the Early Offer Support for Voice and Video Calls option on the SIP profile.
C. Select the Display IE Delivery check box in the gateway configuration.
D. Select the Enable Inbound FastStart check box on the Cisco Unified Communications Manager
servers.
E. Select the SRTP Allowed check box on the SIP trunk.
F. Execute the isdn switch-type primary-ni command globally.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 150
http://www.passleader.com
Answer: AB

QUESTION 299
You are deploying a Cisco Unified Communications Manager solution with MGCP gateways at
multiple locations. Which firewall and ACL configuration must you perform to allow the MCGP
gateways to function correctly?

A. Allow access to TCP port 2428.

B. Block TCP port 1720.
C. Open access to all TCP and UDP ports.
D. Allow access to TCP port 1720.
E. Block access to TCP ports 2427 and 2428.

Answer: A

QUESTION 300
Which device must be accessible from the public Internet in a Collaboration Edge environment?

A. Expressway-C
B. Cisco Unified Communications Manager
C. Cisco IM and P
D. Expressway-E
E. VCS Control

Answer: D

QUESTION 301
Refer to the exhibit. Which option describes the effect of this configuration?

A. It implements Cisco Unified CME redundancy.

B. It creates dial peers.
C. It configures failover.
D. It configures a standby Cisco Unified CME.
E. It implements HSRP.
F. It implements Cisco IOS redundancy.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 151
http://www.passleader.com
Answer: A

QUESTION 302
On which two call legs is the media encryption enforced in a Collaboration Edge design? (Choose
two.)

A. Expressway-C to Cisco Unified Communications Manager

B. Expressway-C to Expressway-E
C. Expressway-E to outside-located endpoint
D. Expressway-E to Cisco Unified Communications Manager
E. Expressway-C to internal endpoint

Answer: BC

QUESTION 303
Which three statements about configuring an encrypted trunk between Cisco TelePresence Video
Communication Server and Cisco Unified Communications Manager are true? (Choose three.)

A. The root CA of the VCS server certificate must be loaded in Cisco Unified Communications
Manager.
B. A SIP trunk security profile must be configured with Incoming Transport Type set to TCP+UDP.
C. The Cisco Unified Communications Manager trunk configuration must have the destination port
set to 5061.
D. A SIP trunk security profile must be configured with Device Security Mode set to TLS.
E. A SIP trunk security profile must be configured with the X.509 Subject Name from the VCS
certificate.
F. The Cisco Unified Communications Manager zone configured in VCS must have SIP
authentication trust mode set to On.
G. The Cisco Unified Communications Manager zone configured in VCS must have TLS verify mode
set to Off.

Answer: ACE

QUESTION 304
Which three options describe the main functions of SAF Clients? (Choose three.)

A. registering the router as a client with the SAF network

B. providing publishing services to the SAF network
C. subscribing to SAF network services
D. registering Cisco Unified Communications Manager subscribers with the publisher
E. starting Cisco Unified Communications Manager services throughout the cluster
F. integrating with Cisco IM and Presence for additional services

Answer: ABC

QUESTION 305
Which option indicates the best QoS parameters for interactive video?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 152
http://www.passleader.com
A. 1% Max Loss, 150 ms One-way Latency, 30 ms Jitter, 20% Overprovisioning
B. 5% Max Loss, 5 s One-way Latency, 30 ms Jitter, 20% Overprovisioning
C. 0% Max Loss, 100 ms One-way Latency, 30 ms Jitter, 20% Overprovisioning
D. 1% Max Loss, 160 ms One-way Latency, 60 ms Jitter, 10% Overprovisioning

Answer: A

QUESTION 306
Which three configuration settings are included in a default region configuration? (Choose three.)

A. Audio Codec
B. Video Call Bandwidth
C. Link Loss Type
D. Location Description
E. Immersive Bandwidth
F. Real Time Protocol

Answer: ABC

QUESTION 307
Which three items must you configure to enable SAF Call Control Discovery? (Choose three.)

A. the SIP or H.323 trunk

B. hosted DN groups
C. hosted DN patterns
D. route patterns
E. a calling search space
F. translation patterns

Answer: ABC

QUESTION 308
Which two statements about SAF service identifier numbers are true? (Choose two.)

A. They are generated in the format service:sub- service:instance.instance.instance.instance.

B. They are 16-bit decimal identifiers.
C. They are generated in the format data-source:sub-service:instance.matrix.fifty.saf.
D. They are 32-bit decimal identifiers.
E. They are generated in the format [email protected].
F. They are generated in the format telco.cisco.saf-forwader.db.replicate.data.local.

Answer: AB

QUESTION 309
A voice engineer is enabling video capabilities between H.323 and SIP endpoints.
Which component allows for standardized caller addresses between the endpoints?

A. search rules

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 153
http://www.passleader.com
B. SIP route pattern
C. policy service
D. transform

Answer: D

QUESTION 310
Which two statements about Cisco Unified Communications Manager Extension Mobility are
true? (Choose two.)

A. After an autogenerated device profile is created, you can associate it with one or more users.
B. An autogenerated device profiles can be loaded on a device at the same time as a user profile.
C. A device can adopt a user profile even when no user is logged in.
D. A device profile has most of the same attributes as a physical device.
E. Devices can be configured to allow more than one user to be logged in at the same time.

Answer: CD

QUESTION 311
When you configure a globalized dial plan, in which three ways can you enable ingress gateways
to process calls? (Choose three.)

A. Configure the called-party transformation settings for incoming calls on H.323 gateways.
B. Configure translation patterns in the partitions used by the gateway calling search space.
C. Configure SIP trunks between Cisco Unified Communications Manager clusters.
D. Configure a remote site device pool.
E. Configure a hunt group.
F. Configure the gateway with prefix digits to add necessary country and region codes.

Answer: ABF
Explanation:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/8x/uc8x/dialplan.html#wp11531
6

QUESTION 312
How many nodes can a phone establish a connection to at the same time?

A. 4
B. 3
C. 1
D. 2

Answer: D

QUESTION 313
Company X has a primary and a backup Cisco Unified Communications Manager instance.
The administrator had to do maintenance on the primary node and did a shutdown, which
resulted in a failover to the backup node.
What happens when the primary node comes back online?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 154
http://www.passleader.com
A. The primary node becomes the backup node.
B. Endpoints detect that the primary is back and reregisters automatically.
C. The backup node must be shut down first to allow the endpoints to realize that the primary node
is online again.
D. Nothing, the endpoints only failover when the node they lose connection to their registered node.

Answer: B

QUESTION 314
Company X has deployed a VCS Control with a local zone and a traversal client zone.
To facilitate external calls, VCS Expressway is deployed and traversal server zone is set up
there. Video endpoints inside Company X have registered, but are unable to receive calls from
outside endpoints. Which option could be the cause of this issue?

A. The traversal zone on the VCS Control does not have a search rule configured.
B. The access control list on the VCS Control must be updated with the IP for the external users.
C. When a traversal zone is set up on VCS Control only outbound calls are possible.
D. The local zone on the VCS Control does not have a search rule configured.

Answer: A

QUESTION 315
Which two options are requirements for hardware MTP on Cisco IOS routers? (Choose two.)

A. PVDM or DSP resource

B. LTI local transcode resource
C. ref2833
D. one audio codec
E. T1 PRI card

Answer: AB

QUESTION 316
The Cisco Unified Communications system of a company has five types of devices:

•Cisco Jabber Desktop

•CP-7965
•DX-650
•EX-60
•MX-200

Which two types of devices are affected when an engineer changes the DSCP for Video Calls
service parameter? (Choose two.)

A. DX-650
B. Cisco Jabber Desktop
C. CP-7965
D. EX-60
E. MX-200

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 155
http://www.passleader.com
Answer: AB

QUESTION 317
Refer to the exhibit. An engineer receives a ticket to troubleshoot a one-way audio issue with
these symptoms:

- User A can hear user and vice versa.

- User A can hear user C, however user cannot hear user A.
- User can heat user C, however user cannot hear user .

Which two properties are the most likely reasons for this issue? (Choose two.)

A. The Cisco EX60 default gateway of User C is missing from the network configuration.
B. The NAT device is allowing only RTP/RTCP ports from the internal network to the DMZ.
C. The Cisco EX60 of User C is not responding to requests coming from the TMS server.
D. The Cisco VCS Expressway is not responding to the SIP INVITE coming from the Cisco VCS
Control.
E. The router does not have a route back from the DMZ to the internal network.

Answer: BE
Explanation:
http://www.cisco.com/c/en/us/support/docs/voice/voice-quality/5219-fix-1way-voice.html

QUESTION 318
Which message does a Cisco VCS use to monitor the Presence status of endpoints?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 156
http://www.passleader.com
A. start-call
B. in-call
C. end-call
D. call-ended
E. call-started
F. registration

Answer: F

QUESTION 319
Which three steps configure Cisco Unified Survivable Remote Site Telephony for SIP phones?
(Choose three.)

A. Configure voice register pool.

B. Configure voice register global dn.
C. Configure an SRST reference.
D. Configure a phone NTP reference.
E. Configure the SIP registrar.
F. Configure telephony service.

Answer: ACE

QUESTION 320
Which three options are overlapping parameters for roaming when a device is configured for
Device Mobility? (Choose three.)

A. device pool
B. location
C. network locale
D. codec
E. MRGL
F. extension

Answer: BCE
Explanation:
The overlapping parameters for roaming-sensitive settings are Media Resource Group List,
Location, and Network Locale. The overlapping parameters for the Device Mobility-related
settings are Calling Search Space (called Device Mobility Calling Search Space at the device
pool), AAR Group, and AAR Calling Search Space. Overlapping parameters configured at the
phone have higher priority than settings at the home device pool and lower priority than settings
at the roaming device pool.
https://supportforums.cisco.com/document/77096/device-mobility

QUESTION 321
An engineer is working on a Cisco VCS Control routing configuration and wants users to be able
to dial ccnpcollab and have calls routed to [email protected].
Which option achieves this aim?

A. search rules
B. transforms

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 157
http://www.passleader.com
C. access rules
D. call policy

Answer: B
Explanation:
Although Call Policy could be used, typically this type of alias change is done using transforms
(either pre-search transforms or search rule transforms). Call Policy could be justified as the
correct answer based on how the question is interpreted. If this change is only intended for the
ccnpcollab alias being dialed, and not for other aliases that might be dialed without a domain,
then call policy makes since. Still, I would never use Call Policy in this capacity, nor does Cisco
recommend this.

QUESTION 322
An administrator is setting up analog phones that connect to a Cisco VG310. Which type of
gateway or trunk on Cisco Unified Communication Manager for the Cisco VG310 must the
administrator set up to allow the phones to have the call pickup feature?

A. H.323 gateway
B. SCCP gateway
C. H.225 trunk
D. MGCP gateway
E. SIP trunk

Answer: B
Explanation:
http://www.cisco.com/c/en/us/products/collateral/unified-communications/vg-series-
gateways/product_data_sheet09186a00801d87f6.html

QUESTION 323
An engineer must enable video desktop sharing between a Cisco Unified Communications
Manager registered video endpoint and a Cisco VCS registered video endpoint.
Which protocol must be enabled in SIP profile for VCS SIP trunk on Cisco Unified
Communications Manager?

A. RDP
B. H.264
C. H.224
D. H.263
E. BFCP

Answer: E

QUESTION 324
An engineer must resolve a "VIDEO" call failure issue. When using RTMT, the engineer notices
that the Location Bandwidth Manager-OutOfResources counter is showing a positive value.
Which option is the cause of the call failure?

A. lack of audio bandwidth

B. lack of video bandwidth
C. lack of transcoding resources

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 158
http://www.passleader.com
D. lack of audio or video bandwidth
E. lack of conferencing resources

Answer: B

QUESTION 325
While troubleshooting a connectivity issue between Cisco Unified Communications Manager,
Expressway-C, and Expressway-E, an engineer sees this output in the Expressway-E logs.

Event="Authentication Failed" Service="SIP" Src-ip="10.50.2.1"

Src-port="25723" Detail="Incorrect authentication credential for user"
Protocol "TLS" Method="OPTIONS" Level="1"

What is the cause of this issue?

A. The Expressway-C Traversal Server username/password do not match the Expressway-E

Traversal Zone username/password.
B. The Expressway-C Traversal Client username/password do not match the Expressway-E
Traversal Server username/password.
C. The Expressway-C Traversal Zone username/password do not match the Expressway-E
Traversal Zone username/password.
D. The Expressway-C Traversal Zone username/password do not match the Expressway-E
Traversal
Client username/password.
E. The Expressway-C Traversal Server username/password do not match the Expressway-E
Traversal Client username/password.

Answer: B

QUESTION 326
An engineer is performing an international multisite deployment and wants to create an effective
backup method to access TEHO destinations in case the call limit triggers. Which technology
provides this ability?

A. AAR
B. CFUR
C. LRG
D. SRST

Answer: C

QUESTION 327
An engineer is configuring a SIP profile for Cisco VCS SIP trunk on Cisco Unified
Communications Manager and enables the option "Use Fully Qualified Domain Name" in SIP
Requests. Which result is achieved by enabling this option?

A. Resolve FQDN using DNS type SRV record.

B. Resolve FQDN using DNS type A record.
C. Ensure FQDN is used in SIP Identity header.
D. Ensure FQDN is used in SIP Request header.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 159
http://www.passleader.com
Answer: D

QUESTION 328
Which two options are functionalities of subzones in a Cisco VCS deployment? (Choose two.)

A. Resolve names outside of the direct control of the Cisco VCS that exist on the public Internet.
B. Connect to another Cisco VCS on the same side of the firewall to extend dialing capabilities.
C. Traverse a firewall from a protected network to a public or DMZ network.
D. Apply registration, authentication, and media encryption policies.
E. Manage bandwidth to restrict standard definition endpoints from using more than 2 Mb of
bandwidth.

Answer: DE

QUESTION 329
Which situation requires TCP port 443 to be open for packets that are sourced from the Internet
with a destination in the corporate DMZ?

A. when video endpoints that reside on the Internet require administrative access to the Cisco
Expressway Edge
B. when you require encrypted calls to endpoints on your corporate LAN
C. when you want to enable calls to web applications by using HTTP
D. when you require administrative access to the Cisco Expressway Edge from the Internet

Answer: D
Explanation:
VCS/Expressway servers only use port 443 for administrative access. No call session of any sort
on a VCS or Expressway use port 443. Also, the “Unified Communications Mobile and Remote
Access via Cisco VCS Deployment Guide” identified port 443 as the administrative access port
from pubic internet to VCS Expressway.
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-
1/Mobile-Remote-Access-via-VCS-Deployment-Guide-X8-1-1.pdf

QUESTION 330
Refer to the exhibit. Which option describes the effect of this configuration?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 160
http://www.passleader.com
A. It implements Cisco Unified CME redundancy.
B. It configures a standby Cisco Unified E.
C. It configures failover.
D. It implements Cisco IOS redundancy.
E. It creates dial peers.
F. It implements HSRP.

Answer: A

QUESTION 331
Which two types of trunks can support Cisco Unified Communications Manager? (Choose two.)

A. switch port trunks

B. PIMG trunks
C. SIP trunks
D. H.225 trunks
E. CO trunks
F. POTS trunks

Answer: CD
Explanation:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_5_1/ccmsys/accm-851-
cm/a08trnk.html#wp1098521

QUESTION 332
Which three tests can you perform to verify redundancy in the customer environment? (Choose
three.)

A. Verify that Cisco Unified IP phones running SCCP go into SRST mode when the WAN connection
is disconnected.
B. Verify that all phones are registered to a second subscriber server.
C. Verify that SCCP fallback is configured in Cisco Unified Communications Manager.
D. Verify that HSRP is active on the Cisco Unified Communications Manager subscriber servers.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 161
http://www.passleader.com
E. Verify that media resources fail over to a secondary subscriber server when the publisher fails.
F. Verify that the H.323 redundant connection is active.

Answer: ABE

QUESTION 333
Which option indicates the best QoS parameters for interactive video?

A. 0% Max Loss, 100 ms One-way Latency, 30 ms Jitter, 20% Overprovisioning

B. 1% Max Loss, 160 ms One-way Latency, 60 ms Jitter, 10% Overprovisioning
C. 1% Max Loss, 150 ms One-way Latency, 30 ms Jitter, 20% Overprovisioning
D. 5% Max Loss, 5 s One-way Latency, 30 ms Jitter, 20% Overprovisioning

Answer: C
Explanation:
http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoS-
SRND-Book/QoSIntro.html (interactive video)

QUESTION 334
Which three items must you configure to enable SAF Call Control Discovery? (Choose three.)

A. a calling search space

B. hosted DN patterns
C. translation patterns
D. route patterns
E. the SIP or H.323 trunk
F. hosted DN groups

Answer: BEF

QUESTION 335
The Cisco Unified Communications system of a company has five types of devices:

•Cisco Jabber Desktop

•CP-7965
•DX-650
•EX-60
•MX-200

Which two types of devices are affected when an engineer changes the DSCP for TelePresence
Calls service parameter? (Choose two.)

A. a Cisco Jabber Desktop

B. DX-650
C. CP-7965
D. MX-200
E. EX-60

Answer: DE

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 162
http://www.passleader.com
QUESTION 336
A presales engineer is working on a quote for a major customer and must evaluate how many
Cisco VCS Expressway traversal call licenses for which to plan. Calls to and from which three
routes must the engineer include in the tally? (Choose three.)

A. gateway
B. Cisco 9971 Endpoint
C. border controllers
D. gatekeeper
E. SIP trunk
F. VCS

Answer: CDF

QUESTION 337
Which three devices or applications support call preservation? (Choose three.)

A. a software conference bridge

B. Cisco Unified IP Phone 7962G
C. an annunciator
D. SIP trunks
E. JTAPI applications
F. TAPI applications
G. CTI applications
H. third-party H.323 endpoints

Answer: ABD

QUESTION 338
An engineer is configuring Global Dial Plan Replication and wants to prevent the local cluster
from routing the Vice President number 5555555555 to the remote cluster.
Which action accomplishes this task?

A. Create a block route pattern.

B. Create a block learned pattern.
C. Create a block transformation pattern.
D. Create a block translation pattern.

Answer: B
Explanation:
GDPR using ILS allows for blocking learned patterns to be configured in the CUCM.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F
3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-
services-guide-100_chapter_011101.html#CUCM_TK_BDDD9061_00

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 163
http://www.passleader.com
QUESTION 339
An administrator is visiting a remote site that has on-net calls with headquarters and one voice
gateway for PSTN calls. When using RTMT to monitor the bandwidth utilization of the remote
site, the administrator notices the OutOfResources counter for the site in LBM has been
increasing slowly in last two weeks, but no call failure reports have been sent from this site.
Which description about this issue is true?

A. The bandwidth settings of the site are fulfilling on-net call volume.
B. AAR is routing some of the calls.
C. The location-based CAC does not work properly.
D. The LBM service is malfunctioning.

Answer: B

QUESTION 340
An engineer is configuring URI calling within the same cluster.
Which two actions must be taken to accomplish this configuration? (Choose two.)

A. Configure SIP route patterns.

B. Configure the directory URI partition and calling search space.
C. Associate the directory URIs to directory numbers.
D. Activate the URI service in Cisco Unified Serviceability.
E. Configure SIP trunk.
F. Assign directory URIs to users.
G. Configure the SIP profile.
H. Configure the URI service parameters.

Answer: FG

QUESTION 341
Which two steps must you take when implementing TEHO in your environment? (Choose two.)

A. Implement local failover.

B. Implement SIP to POTS.
C. Load-balance PRI connections.
D. Load-balance route lists within the cluster.
E. Implement ICT trunks to remote locations.
F. Implement centralized failover.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 164
http://www.passleader.com
Answer: AF

QUESTION 342
You have deployed a Cisco 2821 ISR to perform as an SRST voice gateway at a remote site.
During a network failure between the remote site and the central office, some of the phones
located at the remote site are unable to make phone calls.
Which two options are potential causes of the problem? (Choose two.)

A. The site has exceeded the number of SRST endpoints supported by the voice gateway.
B. The ccm-manager fallback command is configured incorrectly on the voice gateway.
C. Some Phones at the remote site are assigned a device pool without SRST reference.
D. The ccm-manager fallback-mgcp command is configured incorrectly on the voice gateway.
E. The site has exceeded the number of simultaneous calls allowed in SRST mode.

Answer: AC

QUESTION 343
Which two functions can be implemented without MTP resources?

A. h.323 fast start

B. IPV6 -IPV4 transform
C. DTMF inband RTP-NTE (rfc2833)
D. Sip delay offer
E. Multicast MOH

Answer: DE

QUESTION 344
An engineer is setting up a Cisco VCS Cluster with SIP endpoints only. While configuring the
Cisco VCS peers, which signaling protocol is used between peers to determine the best route for
calls?

A. SIP
B. H.323
C. SCCP
D. MGCP

Answer: B

QUESTION 345
Which three globalization dialing functions are enhanced in Cisco Unified Communications
Manager 7.x and later? (Choose three.)

A. MGRL
B. TEHO
C. CER
D. AAR
E. SAF
F. click-to-call

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 165
http://www.passleader.com
Answer: BCD
Explanation:
TEHO stands for Tail End Hop Off, CER stands for Cisco Emergency Responder and AAR
stands for Automated Alternate Routing. These are the correct answers according to the Cisco
Collaboration System SRND.

QUESTION 346
Which two commands verify Cisco IP Phone registration? (Choose two.)

A. show telephony-service ephone-dn

B. show voice register session-server
C. show ephone registered
D. show ccm-manager hosts
E. show sip-ua status registrar

Answer: CE

QUESTION 347
Refer to the exhibit. An engineer is deploying a new Cisco VCS Expressway for a company and
has configured the IP address and the system name. After logging into the Cisco VCS
Expressway admin page, the engineer sees this output.
Which option must be configured to complete the Cisco VCS Expressway system configuration?

A. NTP server
B. SIP server
C. LDAP server
D. DHCP server
E. DNS server
F. Cisco Unified Communications Manager IP address

Answer: E

QUESTION 348
After forgetting to log out of his IP phone in the main office, an Extension Mobility user is unable
to log in to a different IP phone at a remote office. Which option is a possible reason for the
problem?

A. The phone at the remote location is a different model than the phone in the user's main office.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 166
http://www.passleader.com
B. The user's Extension Mobility profile is misconfigured.
C. The user can log in to only one device at a time.
D. The device pool is misconfigured.

Answer: C

QUESTION 349
Which solution is needed to enable presence and extension mobility to branch office phones
during a WAN failure?

A. SRST without MGCP fallback

B. SRST with VoIP dial peers to Cisco Unified Communications Manager Express
C. SRST with MGCP fallback
D. Cisco Unified Communications Manager Express in SRST mode

Answer: D

QUESTION 350
An engineer has configured a Cisco EX60 to register with a Cisco VCS-C, but the device is not
showing up as registered. During troubleshooting, which component will the engineer likely find
missing in the configuration?

A. gatekeeper
B. MCU
C. default gateway
D. TMS
E. DNS

Answer: A

QUESTION 351
An engineer is configuring a new DX-80 in Cisco Unified Communications Manager.
Where can an engineer verify the default DSCP value of AF41?

A. enterprise phone configuration

B. common phone profile
C. service parameters
D. enterprise parameters

Answer: C

QUESTION 352
Your company's main number is 408-526-7209, and your employee's directory numbers are 4-
digit numbers. Which option should be configured if you want outgoing calls from 4-digit internal
directory number to be presented as a 10-digit number?

A. calling party transformation pattern

B. AAR group
C. translation pattern

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 167
http://www.passleader.com
D. route pattern

Answer: A

QUESTION 353
Which three configuration settings are included in a default region configuration? (Choose three.)

A. Immersive Bandwidth
B. Video Call Bandwidth
C. Audio Codec
D. Link Loss Type
E. Real Time Protocol
F. Location Description

Answer: BCD
Explanation:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_0_1/ccmcfg/bccm-801-
cm/b02regio.html#wp1077135

QUESTION 354
Refer to the exhibit. Which statement about when user A calls user using SIP is true?

A. SIP TCP/TLS ports must be opened from internal to DMZ and vice versa.
B. Cisco VCS Control and Cisco VCS Expressway support static NAT.
C. Deploying a Cisco VCS Control inside a NAT mandates the use of the Advanced Networking

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 168
http://www.passleader.com
 option key.
D. RT and RTCP ports must be opened at the firewall from internal to DMZ and vice versa.

Answer: A

QUESTION 355
An engineer is troubleshooting a dial path etc" and it gives a config snapshot.
There are three fields populated with "CCNPCOLAB", "Add Suffix" and "@Cisco.com"

Mode : .....
Pattern type : Regex
Pattern string : @cisco.com
Pattern Behaviour :.......
Replace string : ccnpcollab
Target : .....
State : Disabled

A. Can not route call

B. Sent to Cisco.com
C. sent as CCNPCOLAB
D. Sent as [email protected]

Answer: C

QUESTION 356
What are the tasks required to route calls from H323 to SIP and viceversa? (Choose two.)

A. Config-protocols-Interworking-On
B. Config-protocols-Interworking-Off
C. Config-protocols-Interworking-registered only
D. Config-protocols-Sip-Config-Mode-On
E. Config-protocols-H323-H323Mode-On

Answer: AE

QUESTION 357
Refer to the exhibit. What music on hold audio source will be heard if a user at extension 1372
places the user at extension 3041 on hold?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 169
http://www.passleader.com
A. moh2.au
B. moh1.wav
C. default.wav
D. moh2.wav
E. moh1.au

Answer: E

QUESTION 358
What is the default value for the Drop Ad Hoc Conference service parameter?

A. Never
B. When No On-Net Parties Remain in the Conference
C. When No Off-Net Parties Remain in the Conference
D. Drop Ad Hoc Conference When Creator Leaves

Answer: A

QUESTION 359
Which two formats are supported by Cisco Unified Communications Manager to stream music on
hold? (Choose two.)

A. G.711
B. G.729
C. G.723
D. G.722
E. G.728
F. Advanced Audio Codec

Answer: AB

QUESTION 360
How many hosted DN patterns per cluster does Cisco Unified Communications Manager allow

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 170
http://www.passleader.com
you to configure?

A. 500
B. 1000
C. 1500
D. 2000
E. 2500
F. 5000

Answer: D

QUESTION 361
Which codec is recommended by Cisco for multisite music on hold deployment that spans
through the WAN links?

A. G.711
B. G.723
C. G.729
D. G.722
E. G.728
F. G.725

Answer: C

QUESTION 362
As a voice operations engineer, you need to standardize the firmware loads on a Cisco Unified
Communications Manager cluster. You need to ensure that all the IP phones are loaded with
device defaults load information. Which two locations can you verify to find the IP phones that
have their firmware mismatched? (Choose two.)

A. Cisco Unified OS Administration > Software Upgrades > TFTP File Management
B. Cisco Unified CM Administration > Firmware Load Information
C. Cisco Unified CM Administration > Device > Phone
D. Cisco Unified OS Administration > Settings > Version
E. Cisco Unified CM Administration > Device Defaults Configuration
F. Cisco Unified Reporting > System Reports

Answer: BF

QUESTION 363
Which interface can you use to configure alarms and traces in Cisco Unified Communications
Manager?

A. Cisco Unified Reporting

B. Cisco Unified Serviceability
C. Cisco Unified Communications Manager Administration
D. disaster recovery system
E. Cisco Unified OS Administration
F. real-time monitoring

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 171
http://www.passleader.com
Answer: B

QUESTION 364
Refer to the exhibit. To stream multicast MOH to the remote site across the WAN, what should
the minimum value for the Max Hops be configured as?

A. 1
B. 2

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 172
http://www.passleader.com
C. 3
D. 4

Answer: B

QUESTION 365
Refer to the exhibit. Which pattern will be advertised try the Cisco Unified Communications
Manager?

A. 3XXX and the ToDID will be 0:.

B. 3XXX and the TnOID will be 0:44228822.
C. 3XXX and the ToDID will be 44228822.
D. 3XXX and the ToDID will be 0:+44228822.
E. 3XXX and the ToDID will be 0:+

Answer: A

QUESTION 366
Refer to the exhibit. What media resource should be configured in Cisco Unified Communications
Manager?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 173
http://www.passleader.com
A. Cisco Media Termination Point Hardware
B. Cisco IOS Enhanced Media Termination Point Cisco
C. Cisco IOS Media Termination Point
D. Cisco Media Termination Point Hardware (WS-SVC-CMM)

Answer: B

QUESTION 367
Refer to the following exhibits. Users in the U.S dial Germany by calling 9011 49 followed by the
remaining digits. What would be the most suitable configuration for Connection X?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 174
http://www.passleader.com
Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 175
http://www.passleader.com
Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 176
http://www.passleader.com
Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 177
http://www.passleader.com
A. Configure a SIP trunk to 10.140.1.1 and a SIP route pattern +49T in Cisco Unified
Communications Manager.
B. Configure a SIP trunk to the Cisco Unified Border Element and route pattern +49T in Cisco
Unified Communications Manager.
C. configure a SIP trunk to the Cisco Unified Border Element. Configure a translation pattern for
9011.49T using DDI Predot prefix + and CSS to point to a route pattern partition \+! which uses
the SIP trunk.
D. Configure a SIP trunk to the ITSP. Configure a translation pattern for 9011.49T using DDI predot
prefix + and CSS to point to a route pattern partition \+! which uses the SIP trunk.

Answer: C

QUESTION 368
Refer to the exhibit. A PSTN call arrived at the MGCP gateway. The calling number was received
as 14087071222 with number set to type international. The HQ_clng__pty_CSS contains the
HQ_clng_pty__Pt partition. Which caller ID is displayed on the IP phone?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 178
http://www.passleader.com
A. +087071222
B. 14087071222
C. 087071222
D. 4087071222
E. 14087071222

Answer: C

QUESTION 369
Refer to the exhibit. Multicast MOH needs to be run from flash at the remote site. Which Cisco
IOS configuration at the SRST router is correct?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 179
http://www.passleader.com
Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 180
http://www.passleader.com
A. !
call-manager-fallback
ip source-address 10.1.5.102 port 2000
max-ephones 2
max-dn 8 dual-line
moh music-on-hold au
multicast moh 239.1.1.1 port 16384
B. !
call-manager-fallback
ip source-address 10.1.5.102 port 2000
max-ephones 2
max-dn 8 dual-line
moh music-on-hold au
multicast moh 239.1.1.1 port 163t
C. call-manager-fallback
ip source-address 10.1.120.1 port 2000 max-ephones 2 max-dn 8
moh music-on-hold.au
multicast moh 239.1.1.1 port 32767
D. !
call-manager-fallback
ip source-address 10.1.5.102 port 2000
max-ephones 2
max-dn 8 dual-line
moh music-on-hold an
multicast moh 239.1.1.1 port 32767

Answer: A

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 181
http://www.passleader.com
QUESTION 370
Which type of search message appears in the Cisco TelePresence Video Communication Server
search history page when it receives a H.323 call from a RAS-enabled endpoint that originates
from an external zone?

A. ARQ
B. SETUP
C. LRQ
D. INVITE
E. OPTIONS

Answer: C

QUESTION 371
A Cisco 3825 needs to be added in Cisco Unified Communications Manager as an H.323
gateway. What should the gateway type be?

A. H.323 gateway
B. Cisco 3825
C. Cisco 3800 series router. The specific model will be selected after the Cisco 3800 is selected.
D. The gateway can be added either as an H.323 gateway or Cisco 3800 series router.
E. The gateway can be added either as an H.323 gateway or Cisco 3825 series router.

Answer: A

QUESTION 372
Which two have to be defined in the Forward All field? (Choose two)
A. calling search space
B. destination
C. partition
D. hunt list

Answer: AB

QUESTION 373
You have deployed a centralized call processing solution with a multicast MOH server at your
central site on a different VLAN from your Cisco Unified Communications Manager servers and IP
phones. When central site users place calls on hold, dead air or silence is heard. Which two
actions will resolve this issue? (Choose two.)

A. Enable multicast routing on all the routers at the central site.

B. Increase the TTL in the configuration of the MOH server to 2 so that packets can cross the VLAN
boundary.
C. Decrease the TTL configuration in the Cisco Unified Communications Manager server to 0 so that
the multicast packets only go to the VLAN that contains the Cisco Unified Communications
Manager server and IP phones.
D. Enable multicast routing on only those router interfaces that connect the voice and MOH VLANs.
E. Keep the TTL at 1 for the MOH server and increase the TTL for IP multicast routing to 2 on router
interfaces.
F. Configure ip-sparse mode on the router interfaces and increase the TTL on the routers to 2.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 182
http://www.passleader.com
Answer: AB

QUESTION 374
Which three statements are true in order for inbound PSTN calls to work in an H.323 gateway
configured with Cisco Unified Communications Manager? (Choose three.)

A. The H.323 gateway should be registered with Cisco Unified Communications Manager.
B. The command h323-gateway voip tech-prefix should be configured on the H.323 interface.
C. The command h323-gateway voip bind srcaddr should be configured on the H.323 interface.
D. A VoIP dial peer pointing to Cisco Unified Communications Manager should be configured.
E. The command h323-gateway voip id should be configured under the H.323 interface.
F. A pots dial peer with direct-inward-dial and incoming-called number should be configured.

Answer: CDF

QUESTION 375
What are two requirements for configuring an Intercluster Trunk (gatekeeper-controlled) in Cisco
Unified Communications Manager? (Choose two.)

A. The assigned name must be unique within the cluster.

B. The Intercluster Trunk must have the same name in both clusters.
C. The Cisco Unified Communications Manager group in the assigned device pool will determine
which Cisco Unified Communications Manager systems register with the gatekeeper.
D. The IP addresses of Cisco Unified Communications Manager systems in the remote cluster must
be specified.
E. The gatekeeper must be defined in Cisco Unified Communications Manager before the
intercluster trunk is added.
F. RSVP must be enabled to provide CAC between clusters.

Answer: CE

QUESTION 376
Which two statements describe a transcoder? (Choose two.)

A. Transcoders can only connect two streams of the same codec type that use different sampling
rates.
B. Transcoders may operate as a Media Termination Point when the codecs are of the same
sampling rate but use different codec types.
C. Transcoders may be combined with conferencing resources on a single DSP to conserve
resources.
D. Transcoders can convert an input stream of one codec to an output stream that uses a different
codec type.
E. Transcoders convert lower bit rate streams to higher bit rate streams.

Answer: BD

QUESTION 377
When you configure a region to use the G.729 codec, which other codecs can be utilized in the

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 183
http://www.passleader.com
region?

A. The region can use all the codecs supported by Cisco Unified Communications Manager.
B. The region will use all of the codecs supported by Cisco Unified Communications Manager as
long as a software Media Termination Point is available.
C. The region will only use the codec configured in the region configuration field and any other
codecs of equal or lower bandwidth.
D. The region will use the configured codec and the default codec as long as it does not exceed the
configured bandwidth for the region.

Answer: C

QUESTION 378
Which statement describes locations based CAC?

A. It is a purely logical assignment and does not reflect the actual topology or the actual bandwidth
available.
B. The configured bandwidth limit is dependent on the destination location of the call.
C. Each device may have more than one location assigned.
D. Cisco Unified Communications Manager uses an arbitrary bandwidth value for each location.
E. Locations based CAC is used to determine the codec used between sites.

Answer: A

QUESTION 379
What is the purpose of a region?

A. to specify only the audio codec used within a site

B. to specify only the video codec used between other specific sites
C. to specify the range of codecs used between all other sites
D. to specify the audio and video codecs used between specific sites

Answer: D

QUESTION 380
Which two configurations provide the best SIP trunk redundancy with Cisco Unified
Communications Manager? (Choose two.)

A. Configure all SIP trunks with DNS SRV.

B. Configure all SIP trunks with Cisco Unified Border Element.
C. Configure all SIP trunks to point to a SIP gateway.
D. Configure SIP trunks to be members of route groups and route lists.
E. Configure all SIP trunks to allow TCP ports 5060.
F. Configure all SIP trunks to point to a gatekeeper through SIP to H.323 gateway.

Answer: AD

QUESTION 381

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 184
http://www.passleader.com
Which service, when correctly configured in Enterprise Parameters, permits the phone
configuration files to be encrypted?

A. Cisco Unified Communications Manager Service

B. Cisco IP Voice Media Streaming App Service
C. Cisco CTIManager Service
D. Cisco TFTP Service
E. Cisco CTL Client Service

Answer: D

QUESTION 382
What is required to effectively use the Cisco CTL client to activate security in an IP telephony
network?

A. H.323 gateway
B. Security Tokens
C. IPSEC
D. Secure SRST

Answer: B

QUESTION 383
When configuring CAPF, user intervention is required when using which authentication mode?

A. by existing certificate (precedence to LSC)

B. by null string
C. by existing certificate (precedence to MIC)
D. by authentication string
E. user intervention never required

Answer: D

QUESTION 384
A voice-mail product that supports only the G.711 codec is installed in headquarters.
Which action allows branch Cisco IP phones to function with voice mail while using only the
G.729 codec over the WAN link to headquarters?

A. Configure Cisco Unified Communications Manager regions.

B. Configure transcoding within Cisco Unified Communications Manager.
C. Configure transcoding resources in Cisco IOS and assign to the MRGL of Cisco IP phones.
D. Configure transcoder resources in the branch Cisco IP phones.

Answer: C

QUESTION 385
Which statement about AAR functionality is true?

A. AAR reroutes calls through the PSTN upon WAN failure.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 185
http://www.passleader.com
B. AAR reroutes calls through the PSTN when Cisco Unified Communications Manager CAC blocks
a call.
C. AAR reroutes calls through the WAN when the PSTN connection fails.
D. AAR reroutes calls to another phone number when a Cisco IP Phone unregisters.

Answer: B

QUESTION 386
Which statement about RSVP is true?

A. MTP is typically used for RSVP agent configuration.

B. If the RSVP agent cannot reserve the required bandwidth on first effort, it enables low latency
queuing and tries to connect the call again.
C. Cisco Unified Communications Manager uses the RSVP-configured bandwidth between sites as
a method of determining if there is sufficient bandwidth for the call.
D. Cisco Unified Communications Manager uses an RSVP-enabled infrastructure and an RSVP-
controlled agent to request a bandwidth reservation from the network in order to place a call.

Answer: D

QUESTION 387
An MOH server is configured to stream a local .wav file that is located on its own hard disk drive.
An external caller reports that they can only hear the TOH when they are placed on hold. Which
two could be the problem? (Choose two.)

A. The sound card is missing from the server.

B. The music CD is corrupted.
C. Insufficient bandwidth is configured.
D. Unicast streams exceeded the maximum that was configured.

Answer: CD

QUESTION 388
An engineer implemented a VCS as a gateway to allow SIP and H323 endpoints to register, what
recommended protocol or gateway should be used?

A. SIP trunk gatekeeper

B. H323 gateway
C. H321 gateway-based
D. SIP

Answer: B

QUESTION 389
Which command should you use on the gatekeeper to specify the address of a Cisco Unified
Communications Manager IP address?

A. gw-type-ip
B. gw-type-prefix-ip

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 186
http://www.passleader.com
C. gw-ip-cm
D. gw-type-prefix
E. gw-ip-type
F. gw-prefix-ip

Answer: D

QUESTION 390
Which statement best describes a Media Termination Point?

A. A hardware Media Termination Point can be used to transcode a-law to mu-law and vice versa,
but both connections must utilize the same packetization periods.
B. A Media Termination Point is an entity that accepts two full-duplex G.711 streams. It bridges the
media streams together and allows them to be set up and torn down independently.
C. A Media Termination Point corrects a mismatch in DTMF transport types when using Delayed
Offer for inbound SIP calls.
D. In Cisco Unified Communications Manager 6.0, a Media Termination Point is required when two
endpoints use a common method for sending DTMF between them such as for all calls using SIP
trunks.
E. When using H.323 Fast Start, for inbound and outbound Fast Start, a Media Termination Point is
required.

Answer: B

QUESTION 391
Which two call scenarios are supported by AAR? (Choose two.)

A. calls with CTI route points as the origin or destination of calls

B. calls from Cisco Unified Communications Manager Extension Mobility users who roam to different
sites
C. calls from remote sites where SRST is activated
D. calls originating from an IP phone within one location which terminates at an IP phone within
another location
E. calls incoming through a gateway device within one location which terminates at an IP phone
within another location

Answer: DE

QUESTION 392
Which two statements regarding the Cisco VCS search and transformation process are true?
(Choose two.)

A. The Cisco VCS applies the search rules in priority order (all rules with priority 255 are processed
first, then rules with priority 254, and so on).
B. Transforms do not use priority numbers.
C. Presearch transforms are applied before call policy is configured and before user policy is
applied.
D. Presearch transforms are applied after call policy is configured but before user policy is applied.
E. The Cisco VCS applies the search rules in priority order (all rules with priority 1 are processed
first, then priority 2, and so on).

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 187
http://www.passleader.com
F. You cannot set up search rules according to the protocol SIP or H.323.

Answer: CE

QUESTION 393
Which feature enables users to manage business calls by using one phone number to pick up
inprogress calls on either their desk phone or their mobile phone?

A. desktop call pickup

B. send call to mobile phone
C. mobile connect
D. mobile voice access
E. access list

Answer: C
Explanation:
Mobile Connect - This feature enables users to manage business calls by using a single phone
number to pick up in-progress calls on the desk phone and the mobile phone.

QUESTION 394
When configuring a secure SIP trunk, to which Cisco Unified Communications Manager trust
store must you upload the Cisco VCS certificate?

A. CallManager-trust
B. ipsec-trust
C. tomcat-trust
D. TVS-trust

Answer: A

QUESTION 395
Which DSCP value and PHB equivalent are the default for audio calls?

A. 34 and AF41
B. 32 and AF41
C. 32 and CS4
D. 46 and EF

Answer: D

QUESTION 396
For inbound calls that use SIP gateways to cisco unified communications manager, which two
options are available when configuring the format for the calling number type? (Choose two)

A. Unknown
B. Subscriber
C. Long Distance
D. Default
E. SIP

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 188
http://www.passleader.com
Answer: AB
Explanation:
For the final presentation of the calling party number, you can configure calling party
transformation patterns for each calling party number type (National, International, Subscriber,
and Unknown), and apply strip digits and prefix instructions specific to the calling party number
type for that call. This allows Cisco Unified Communications Manager to reformat the calling party
number such that the calling party number that displays on the called phone is a localized number
that does not include unnecessary country codes and international access codes.
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_0_1/sysConfig/CUCM_B
K_C733E983_00_cucm-system-configuration-guide/calling_party___normalization.pdf

QUESTION 397
You are deploying a Cisco unified communications manager solution with MGCP gateways at
multiple locations. Which firewall and ACL configuration must you perform to allow the MCGP
gateways to function correctly?

A. Block TCP port 1720

B. Allow access to TCP port 1720
C. Block access to TCP ports 2427 and 2428
D. Allow access to TCP port 2428.
E. Open access to all TCP and UDP ports.

Answer: D

QUESTION 398
On which two call logs is the media encryption enforced in a Collaboration Edge design? (Choose
two)

A. Expressway-C to internal endpoint

B. Expressway-E to outside-located endpoint
C. Expressway-C to Expressway-E
D. Expressway-E to Cisco Unified Communications Manager
E. Expressway-C to Cisco Unified Communications Manager

Answer: BC

QUESTION 399
Which three options are Cisco VCS zone types? (Choose three.)

A. H323
B. DNS
C. traversal client
D. gatekeeper
E. neighbor
F. SIP

Answer: BCE

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 189
http://www.passleader.com
QUESTION 400
In Cisco Unified Communications manager, where can you configure the default codec between
two different regions for all endpoints?

A. Device Pool configuration

B. Service Parameters
C. Enterprise Parameters
D. Endpoint Configuration

Answer: B

QUESTION 401
Which three steps are necessary to configure mobile and remote access on Cisco VCS Control?
(Choose three)

A. Register voice gateways with Cisco Unified Communications Manager

B. Configure Cisco VCS for Cisco Unified Communication
C. Configure Directory Services for Cisco Unified Communication
D. Discover Cisco Unified Communicators Manager and IM&P Servers.
E. After the discovery confirm the connectivity between Cisco VCS Control with Cisco Unified
Communication Manager and IM&P
F. Configure DNS and NTP

Answer: BDF
Explanation:
https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-
6/Mobile-Remote-Access-via-VCS-Deployment-Guide-X8-6.pdf

QUESTION 402
When configuring a video ISDN gateway. Which two actions are requirements for the cisco
preferred Architecture for enterprise collaboration? (choose two)

A. Use SIP instead of H.323.

B. Perform dial string manipulation on Cisco Unified Communications Manager.
C. Use an * (asterisk) at the end of each ISDN number, as a suffix.
D. Use H.323 instead of SIP.
E. Use an ! (exclamation point) at the end of each ISDN number, as a suffix.

Answer: AB

QUESTION 403
Refer to the exhibit. An engineer is settings up a new deployment and wants to use the Cisco
VCS Control as a gateway for SIP and H.323 endpoints.
Which Cisco VCS configuration step must be performed to allow onset and offset calling?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 190
http://www.passleader.com
A. Set the H.323mode On
B. Set the SIP mode On.
C. Set the Gatekeeper Auto Discover mode On
D. Set the Interworking mode On.

Answer: D
Explanation:
The Interworking page (Configuration > Protocols > Interworking) lets you configure whether or
not the VCS acts as a gateway between SIP and H.323 calls. The translation of calls from one
protocol to the other is known as “interworking”.” The options for the H.323 <-> SIP interworking
mode are:
■ Off: the VCS does not act as a SIP–H.323 gateway.
■ Registered only: the VCS acts as a SIP–H.323 gateway but only if at least one of the endpoints
is locally registered.
■ On: the VCS acts as a SIP–H.323 gateway regardless of whether the endpoints are locally
registered.
https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/admin_guide/Cisco-
VCS-Administrator-Guide-X8-7.pdf

QUESTION 404
Which two items must you configure in Cisco Unified Communications Manager to deploy Cisco
SAF? (Choose two)

A. an MWI
B. voicemail ports
C. a security profile
D. a forwarder
E. a remote destination profile

Answer: CD

QUESTION 405
For which two reasons should you mark AF41 as the audio and video channels of a video call?

A. to allow high-definition quality calls over low-speed links

B. to give video calls a higher priority than AF41 in the QoS policy
C. to provide separate classes for audio-only calls and video calls
D. to prioritize video over other high-priority traffic classes

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 191
http://www.passleader.com
E. to preserve lip synchronization between the audio and video channels

Answer: DE

QUESTION 406
A CUCM cluster has been set up with one to one (1:1) call processing redundancy. What two
occurrences will seen when the primary subscriber fails? (Choose two)

A. The secondary subscriber will start its CallManager service

B. 40 SCCP phones per second will be able to register to the secondary subscriber.
C. The secondary subscriber will start its TFTP service
D. 125 SCCP phones per second will be able to register to the secondary subscriber.
E. 40 SIP phones per second will be able to register to the secondary subscriber.
F. 125 SIP phones per second will be able to register to the secondary subscriber

Answer: DE

QUESTION 407
Select two command. One of which can be used to verify Cisco Ip phone Sip registration and one
of which can be used to verify Cisco Ip phone sccp registration on Cisco unified Communications
Manager express? (Choose two)

A. show ccm-manager hosts

B. show ephone registered
C. show voice register session-server
D. show sip-ua status registrar
E. show telephony-service ephone-dn

Answer: BD

QUESTION 408
To which subzone can you apply bandwidth limitations?

A. default, traversal, and all manually configured subzones

B. manually configured subzones
C. cluster
D. default

Answer: A

QUESTION 409
Which two features are part of Cisco Unified Mobility? (Choose Two)

A. Mobile Voice Access

B. Device Mobility
C. Enterprise Feature Access
D. Shared line
E. Extension Mobility Cross Cluster

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 192
http://www.passleader.com
Answer: AC

QUESTION 410
Company X has clusters deployed in three different countries. Unified states, United Kingdom
and Japan. The administrator has enabled +E164 dialing across locations with ILS responsible
for publishing extensions and PSTN numbers. Users in United States report that there is a delay
every time they dial extensions in the United Kingdom and Japan. The voice administrator
investigates and realizes the GDPR has two sets of route patterns for each site (for example,
+441 for all UK numbers and +44234567890 for a UK user's DID.)
Which option is the solution for the dial delay for onnet calling between clusters?

A. The administrator should setup a translation pattern to remove the + form the learned number.
B. The administrator must set the Learned +E164 fixed-length number as urgent.
C. The administrator must create North America style aliases for all the users in the UK and Japan
locations.
D. This is not possible international numbers all carry a dial delay because the digits are not fixed
like they are in the United States.

Answer: D
Explanation:
The option B does not make much sense as the international numbers have different lengths
depending on country to be dialed. There is no way to set an +E164 fixed-length number for it.

QUESTION 411
Which component provides a list of Cisco Unified Communications Manager node addresses that
allow the phone to register to the cluster?

A. DNS option 150

B. DHCP option 150
C. DHCP option 66
D. configuration file from TFTP server
E. Primary Cisco Unified Communications Manager node from configuration file additional nodes
during registration.

Answer: D
Explanation:
The list of CUCM node address is provided by the configuration file from TFTP server.

QUESTION 412
How is the peer address configured when ExpresswayE has only one NIC enabled and is using
static NAT mode?

A. Expressway-E DHCP
B. Cisco Unified Communications Manager DHCP
C. Expressway-E FQDN
D. Cisco Unified Communications Manager FQDN

Answer: C

QUESTION 413

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 193
http://www.passleader.com
When considering cisco unified communications manager groups, the first entry is always the
primary server that a device will attempt to register to. How many additional backup servers can
be configured for devices to use?

A. 2
B. 6
C. 1
D. 3
E. 5
F. 4

Answer: A

QUESTION 414
What is the default DSCP value for Cisco TelePresence calls in Cisco Unified Communications
Manager?

A. 24
B. 32
C. 46
D. 26
E. 34

Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/uc_system/design/guides/videodg/vidguid
e/qos.html

QUESTION 415
Which three steps are required to configure a SIP trunk on Cisco VCS towards cisco unified
communications manager? (Choose three)

A. Configure a neighbor zone that contains the Cisco Unified Communications Manager.
B. Configure a route pattern zone that contains the Cisco Unified Communications Manager.
C. Configure a transform that converts numbers to appropriate domains.
D. Configure a SIP trunk with Cisco Unified Communications Manager destination IP addresses.
E. Configure a search rule to route calls to the Cisco Unified Communications Manager neighbor
zone.
F. Configure a SIP trunk security profile.

Answer: ACE

QUESTION 416
When troubleshooting high CPU utilization within the Command Line Interface (CLI) of a Cisco
Unified Communications Manager (CUCM).
Which command will show the process CPU usage for all processes?

A. show network status

B. show pert query counter Process"% CPU Time"
C. show pert query counter Partition"% Used"

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 194
http://www.passleader.com
D. show pert query counter Process "Process Status"

Answer: B

QUESTION 417
In the event that the central CUCM is unreachable, how will an endpoint identify which IP address
to connect to for registration and call processing?

A. DHCP Option 150

B. SRST Reference
C. SRST router fallback config
D. Cisco Discovery Protocol

Answer: B

QUESTION 418
An Enterprise Alternate Number is not reachable in GDPR. What navigation will allow an
engineer to configure an automatic switching to a backup number?

A. PSTN failover numbers

B. External Phone Number Mask
C. CFUR
D. Voicemail

Answer: A

QUESTION 419
An engineer must ensure that a device register to Cisco VCSC.
Which protocol accomplish this task?

A. H.260
B. H.264
C. MGCP
D. SIP

Answer: D

QUESTION 420
Which device must be responsible for properly making network traffic when a cisco ip phone is
connected to a cisco switch?

A. core layer switch

B. access layer switch
C. branch router
D. Cisco IP phono

Answer: B

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 195
http://www.passleader.com
QUESTION 421
A user reports that when using desk phone A at the office HQ a call can be extended to a cell
phone, but when the desk phone B is used at another office branch, the call cannot be executed.
Which Cisco Unified Communications Manager configuration item causes this issue?

A. Extension Mobility
B. Device Mobility
C. Mobility soft key
D. Physical Location

Answer: B

QUESTION 422
Which field must be populated to assign a default directory URI partition in Communication
Manager?

A. Directory URI Alias Partition

B. Alias URI Directory Partition
C. Alias URI Partition
D. Directory URI Partition

Answer: A

QUESTION 423
Where in the Cisco Unified Communications Manager Administration GUI must an engineer
navigate to configure Cisco InterCluster Lookup Service authentication in communication
manager?

A. Advanced Features> ILS Configuration> Roles

B. Call Routing > Intercluster Directory URI > Intercluster Directory URI configuration
C. Call Routing > Intercluster Directory URI
D. Advanced Features > ILS Configuration

Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_0_1/sysConfig/CUCM_B
K_C733E983_00_cucm-system-configuration-guide/configure___intercluster_lookup_service.pdf

QUESTION 424
You are configuring a SIP trunk with ID333949146 on Cisco Unified Communications Manager to
direct calls towards the Cisco VCS C/E. Which two check boxes should you enable in the security
profile for the SIP trunk?

A. Transmit Security Status

B. Enable Application Level Authorization
C. Accept Out-of-Dialog REFER
D. Accept Replaces Header
E. Accept Unsolicited Notification
F. Accept Presence Subscription

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 196
http://www.passleader.com
Answer: DE

QUESTION 425
Which two options are dial-plan challenges in a multisite Cisco Unified Communication Manager
deployment?

A. use of same length directory numbers all over the network

B. use of +E164 directory numbers and extensions for phones and services
C. telephony service provider requirements on number format and types
D. use of MGCP gateways instead of SIP trunks
E. use of same DID numbers in multiple sites

Answer: AE

QUESTION 426
Which protocol can you use to create a trunk between Cisco Unified Communication Manager
and Cisco VCS?

A. H.323
B. SIP, H.323
C. ILS
D. SIP

Answer: D

QUESTION 427
What is the maximum allowed round-trip between Cisco Unified Communication Manager nodes?

A. 150 ms
B. 40 ms
C. 500 ms
D. 80 ms

Answer: D

QUESTION 428
Which DSCP service parameter can be configured for Cisco TS endpoints and Cisco
Communication Manager Endpoints?

A. DSCP for audio portion of Cisco Tele Presence calls

B. DSCP for audio calls
C. DSCP for video calls
D. DSCP for audio portion of video calls

Answer: D

QUESTION 429
Which two gateways or trunks are considered to be call-agent controlled?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 197
http://www.passleader.com
A. SIP trunk registered to a SIP proxy server
B. H.323 gateway
C. H.225 trunk (gatekeeper controlled)
D. Skinny Client Control Protocol gateway
E. Media Gateway Control Protocol gateway

Answer: CE

QUESTION 430
An engineer opens up a TAC case and wants to implement CCD/SAF service. Which menu
navigation sequence must an engineer navigate to when configuring a hosted DN pattern?

A. Call Routing > Call Control Discovery > Hosted DN Pattern

B. Advanced Features > SAF > Hosted DN Pattern
C. Call Routing > SAF > Hosted DN Pattern
D. Advanced Features > Call Control Discovery > Hosted DN Pattern

Answer: A

QUESTION 431
Which two options are dial plan elements that Global Dial Plan Replication allows independent
clusters to share with each other using the Intercluster Lookup service?

A. enterprise alternate numbers

B. voicemail profites
C. +E.164 alternate numbers
D. external phone number masks
E. actual directory numbers

Answer: AC

QUESTION 432
Refer to the exhibit. Why are Cisco Unified IP Phones 9971 and 8961 not registering to the SRST
gateway?

A. The SRST reference is not configured on the phone device page.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 198
http://www.passleader.com
B. The SIP network or IP address is not provided.
C. The SIP port is configured incorrectly in the reference.
D. Cisco Unified IP Phones 9971 and 8961 do not work in SRST.

Answer: C

QUESTION 433
Which two results occur in SRST mode if the pickup commands is configured under the call
manager fallback section of a router?

A. The GPickUp soft key in on all SRST phones.

B. The PickUp soft key is on all SRST phones.
C. Calls ringing an unassigned directory number are forwarded to the auto attendant
D. Calls coming into one directory number can be picked up from another directory number
E. Calls coming into a Cisco Unified Communications Manager registered phone can be picked
up by a SRST phone.

Answer: BD
Explanation:
The pickup command was introduced to enable the PickUp soft key on all Cisco Unified IP
Phones, allowing an external Direct Inward Dialing (DID) call coming into one extension to be
picked up from another extension during SRST. Configuring the pickup command enables the
PickUp soft key on all SRST phones. You can then press the PickUp key and answer any
currently ringing IP phone that has a DID called number that matches the configured telephone-
number . This command does not enable the Group PickUp (GPickUp) soft key.
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/
guide/SCCP_and_SIP_SRST_Admin_Guide/srst_roadmap.html#55887
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/command/reference/srstcr/srsa_n_
z.html

QUESTION 434
The network administrator has been investing bandwidth issues between the central office and
remote sites where location-based CAC is implemented. What does the Cisco Unified
Communication Manager "Location Out Resources" counter indicate?

A. This counter represents the total number of times that a call through a location on a particular
Cisco Unified Communications Manager failed due to lack of bandwidth.
B. This counter represents the total number of failed video stream requests (most likely due to
lack of bandwidth) in the location where the person who initiated the video conference resides.
C. This counter represents the total number of times since the last restart of the Cisco IP Voice
Streaming Application that a Cisco Unified Communications Manager connection was lost.
D. This counter represents the total number of times that a call through locations failed due to the
lack of bandwidth.

Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/8_6_1/rtmt/rtmt/rtpmcm.html
#wp1063631

QUESTION 435
Where are DSCP values applied to video traffic?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 199
http://www.passleader.com
A. DSCP can be set only on the video endpoint itself to ensure that the correct value is sent
B. DSCP is configured under service parameters in Cisco Unified Communications Manager and
in the Expressways
C. DSCP can be configured only in the network with QoS policies
D. The endpoint overrides the DSCP values configured anywhere else
E. DSCP is configured in the device configuration section of Cisco Unified Communications
Manager and in the Expressways

Answer: C

QUESTION 436
Which two roaming sensitive setting in the device pool configuration window override the device
level settings when the device roams within or outside a of device mobility group? Choose two

A. MRGL
B. codec
C. device pool
D. network locale
E. extension

Answer: AD

QUESTION 437
Which two statements about Cisco Unified Mobility are true? (Choose two.)

A. Mobile use of Cisco Jabber requires mobility

B. Single number reach is a feature of mobility
C. Mobility is enabled by default
D. Mobility is used to support mobile phones in Cisco Unified Communications
E. Mobility just be enabled per user

Answer: BE

QUESTION 438
Which option is indicated by SDP content in an SIP INVITE?

A. Fast start
B. early media
C. early offer
D. does not indicate anything

Answer: C

QUESTION 439
Which feature can be used to manipulate the calling party numbers of internal calls, post digit
anlusis?

A. called party transformation pattern

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 200
http://www.passleader.com
B. translation pattern
C. calling party transformation pattern
D. external phone mask

Answer: C

QUESTION 440
Which statement about Enhanced Location-based CAC on a Cisco Unified Communications
Manager-based voice network

A. E-LCAC can adjust its knowledge of effective paths due to link failures and reconfigurations.
B. Every cluster that participates in LBM requires the location be locally configured for location to
device association
C. Each cluster requires a complete view of the modeled topology.
D. Each cluster should be configured with the immediate neighboring locations such that the
topology of each cluster

Answer: C

QUESTION 441
You recertify implemented call redundancy at a new remote site, and users report that calls are
dropped when the remote which two actions must you take to troubleshoot the problem? (Choose
two.)

A. Confirm that the site devices are associated with a Cisco Unified Communications Manager
group and that four Cisco Manager servers are available.
B. Check the Region settings in Cisco Unified Communications Manager.
C. Restart Cisco Unified Communications Manager services to confirm that the server is working
correctly.
D. Confirm that a calling search space is assigned to the voice gateway in Cisco Unified
Communications Manager.
E. Confirm that SRST is configured on the voice gateway.
F. Confirm that the site has an SRST reference that is correctly associated with the Cisco Unified
Communications Manager.

Answer: EF

QUESTION 442
Which option describes the meaning of a call termination cause code of 1 in a Cisco Unified
Communications?

A. normal call cleaning

B. resource unavailable, unspecified
C. call rejected
D. Unallocated (unassigned) number

Answer: D

QUESTION 443

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 201
http://www.passleader.com
What is the default DHCP/PHB values for Tele Presence streaming video packets in Cisco
Unified Communications Manager?

A. CS6/48
B. CS3/24
C. CS4/32
D. AF41/34
E. EF/46

Answer: C

QUESTION 444
Which are DSCP values set for video traffic?

A. DSCP is configured in the device configuration section of Cisco Unified Communications

Manager and in the Expressways
B. The endpoint overrides the DSCP values configured anywhere else
C. DSCP is configured under service parameters in Cisco Unified Communications Manager and
in the Expressways.
D. DSCP can be configured only in the network with QoS policies
E. DSCP can be set only on the video endpoint itself to ensure that the correct value is sent.

Answer: D

QUESTION 445
An engineer wants to change a dialed URI into another forma, in Cisco VCS. Which location does
the engineer navigate to accomplish this task?

A. Translation pattern
B. Translation profile
C. Translation rule
D. Transform

Answer: A

QUESTION 446
An engineer wants to allow more calls on the WAN link from the head office lo a branch. The
region setting has been changed from G711 to G729. Which other configuration in Cisco Unified
communication Manager must be updated to accomplish this goal?

A. physical location
B. region
C. location
D. AAR group
E. class of control

Answer: C

QUESTION 447

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 202
http://www.passleader.com
You are asked to help a customer administrator to set Quality of Send options obsteiwide. Which
two options are related to QoS settings on Cisco Communications Manager servers? (Choose
two)

A. You can Configure DSCP values for video calts, audio portion of video calls, and immersive
video differently.
B. you can configure clusterwide QoS parameters in "Cisco CallManager" Service Parameter
section within the call and the portion on any server within the cluster where "Cisco
CallManager" service has been activated.
C. Audio calls and the audio portion of video calls are tagged with DSCP value 46.
D. You can configure clusterwide QoS parameters only in the Enterprise Parameter section on
the Publisher.
E. The option -DSCP lot Video" sets the DSCP value for all types of video to the same value.

Answer: AD

QUESTION 448
Which type of endpoints support the DSCP for Video Calls parameter in Cisco Unified CM?

A. only Cisco Telepresence endpoints

B. any video capable device
C. only Jabber
D. only Cisco UC video endpoints

Answer: B

QUESTION 449
How can you configure VCS Expressway to make sure an external caller cannot reach a specific
internal address?

A. You add a search rule to block any call to the specific URI on the internal VCS Control.
B. VCS Expressway only forwards calls to Cisco Unified Communications Manager who block
calls.
C. You add the specific URI in the firewall section of the VCS Expressway and block it.
D. You block the call with search rule that has a high priority in the VCS Expressway.
You make a transform on the VCS Expressway to direct the call to VCS Control, which can
block the call.

Answer: B

QUESTION 450
Which configuration for the IP DSCP value in the ToS byte to 5 with Expedited Forwarding is
correct?

A. policy-map policy1
class class1
set ip dscp 5
class class2
set ip dscp C S3
B. policy-map policy1

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 203
http://www.passleader.com
 class class1
set ip dscp ef
class class2
set ip dscp 5
C. policy-map policy1
class class1
set ip dscp 5
class class2
set ip dscp ef
D. policy-map policy1
class class1
set ip dscp 3
class class2
set ip dscp ef

Answer: B

QUESTION 451
An engineer must ensure that Expressway-E listens and only its legit sender of such traffic is
Expressway-C. Which port must be opened to accomplish this task?

A. 2000
B. 2111
C. 2222
D. 2333

Answer: C

QUESTION 452
Which two statement about Zones on Cisco Video Communication Snivel (VCS) are
correct?(Choose two.)

A. Bandwidth for calls between endpoints in the same zone cannot be restricted.
B. Endpoint are associated to default subzone or any customized subzone depending on the IP
address of the endpoint.
C. A neighbor zone connects Cisco VCS Core to0 other systems via SIP or H.323.
D. You can register endpoints to default zone.
E. A neighbor zone connects Cisco VCS Cora to Cisco VCS Expressway for NAT, PAT, and
firewall traversal.

Answer: CE

QUESTION 453
Refer to the exhibit. An engineer is troubleshooting an active call and sees this output.
Which option does the PID signify?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 204
http://www.passleader.com
A. ISDN callref ID
B. dial peer
C. process ID
D. CCAPI ID

Answer: B

QUESTION 454
Which configuration can you add to Mobile Connect to explicitly allow or block calls to remote
destinations based on the caller ID of the caller?

A. access list
B. route filter
C. external call control
D. call anchoring

Answer: B

QUESTION 455
Which parameter prevents the Cisco Telepresence Video Communication Server from
responding to endpoint gatekeeper discovery requests?

A. On the VCS, navigate to Configuration, Protocols, H 323, and set Auto Discover to off.
B. On the VCS, navigate to Configuration, Protocols, H 323, and set Auto Registration to of.
C. On the VCS, navigate to Configuration, Registration Configuration and set Auto Registration to
off.
D. On the VCS, navigate to Configuration. Registration Allow List and set Auto Registration to off.

Answer: A

QUESTION 456
How is VCS connected to Cisco Unified Communications Manager?

A. Add Cisco Unified CM to the configuration of VCS Control.

B. Create a SIP trunk between VCS Express and Cisco Unified CM.
C. Create a SIP trunk between Cisco Unified CM and VCS Control.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 205
http://www.passleader.com
D. Configure VCS Control as a gateway in Cisco Unified CM.
E. Create a H.225 trunk between VCS Control and Cisco Unified CM.

Answer: C

QUESTION 457
Which port is used by the Expressway-E to listen for incoming HTTP Proxy (UDS) traffic?

A. 5060
B. 443
C. 5061
D. 8443

Answer: D

QUESTION 458
Drag and Drop Question
Drag and drop the Cisco Unified Communications Manager default DSCP values from the left
onto the correct traffic types on the right.

Exhibit is missing

Answer:

QUESTION 459
How does Cisco Extension Mobility work?

A. A user can log in to any IP phone in the cluster, that phone is dynamically configured with (he
user configurations.
B. A user an define several remote destinations so that a call to the IP phone rings their mobile
and home destinations simultaneously.
C. A user can choose one of several wireless IP phone models for mobile IP communication
throughout the WLAN coverage area.
D. A user can move the phone anywhere within the cluster its calls will be routed out the local

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 206
http://www.passleader.com
 gateway.
E. A user can tog into any phone in the cluster and receive a DN from a predefined range.

Answer: A

QUESTION 460
A CUCM end user with Extension Mobility is associated with an 8851 phone and 8851 device
profile. However, the user logs into a Cisco 8941, which device profile will be used?

A. 8941 default device profile

B. 8851 default device profile
C. the 8851 device profile
D. universal device profile

Answer: D

QUESTION 461
Which Cisco Unified Mobility setting enables or disables an incoming call to ring the desk phone
and the
remote destination at the same time?

A. Mobility Profile
B. Answer Too Soon timer
C. Remote Destination Profile
D. Enable Mobile Connect

Answer: D

QUESTION 462
Which method is recommended to implement high availability when configuring the Extension
Mobility phone service?

A. unique phone service for each Cisco Unified Communications Manager server
B. automatically handled by Cisco Unified Communications Manager
C. server load balancer virtual IP
D. DNS A record with multiple IPs listed

Answer: C

QUESTION 463
In Cisco Unified Communications Manager region configuration, you have "Maximum Audio Bit
Rate" set to 256 kbps between region A and region B.
Which description is true?

A. If the total bandwidth for all calls between region A and B goes beyond 256 kbps, Cisco
Unified Communications Manager starts to drop calls.
B. A single call between region A and B uses bandwidth of exactly 256 kbps.
C. The total bandwidth for all calls between region A and B uses up to 256 kbps.
D. A single call between region A and B uses bandwidth of up to 256 kbps.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 207
http://www.passleader.com
Answer: D

QUESTION 464
Which is best practice on where to mark the packet when a Cisco IP phone is connected to Cisco
Switch?

A. access layer switch

B. branch router
C. Cisco IP phone
D. core layer switch

Answer: A

QUESTION 465
Where does an engineer configure Cisco Unified Communications Manager Directory URI?

A. directory number
B. Cisco IPC
C. CSF - Jabber
D. physical phone

Answer: A

QUESTION 466
QoS should be configured on Cisco VCS because it processes the media and the call signaling.
The endpoints that register to Cisco VCS (such as the Cisco TelePresence System EX Series, C
Series, and Cisco IP Video Phone E20) should be configured so that media uses which Layer 3
DSCP packet value?

A. AF41 (34)
B. EF (46)
C. CS4 (32)
D. CS3 (24)

Answer: D

QUESTION 467
You have configured location-based Call Admission Control on a Cisco Unified Communications
Manager and Cisco IOS Gateway. After the policy below is configured, the calls now fail. All calls
are using g729r8 as the codec. Which configuration resolves the issue?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 208
http://www.passleader.com
A.

B.

C.

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 209
http://www.passleader.com
D.

Answer: D

QUESTION 468
A Cisco IP phone is registered to a SRST gateway and the primary Cisco Unified
Communications Manager server is back online. What is the default duration the phone monitors
its connection to the Cisco Unified CM server, before unregistering with the SRST gateway and
registering with the Cisco Unified CM server?

A. 0
B. 30
C. 120
D. 60

Answer: C

QUESTION 469
Imagine you configured several zones for device registration on Cisco VCS. To which superior
zone are all of your configured zones associated?

A. traversal subzone
B. root zone
C. default subzone
D. default zone
E. default registration zone

Answer: D

QUESTION 470
Which two hosted directory number patterns can be configured on Cisco Unified Communications
Manager for advertisement via the Call Control Discovery process in a Service Advertisement
Framework-enabled network? (Choose two.)

A. Pattern ^+4969|
B. Pattern bob@cisco.*
C. Pattern \+85269[1-2]...
D. Pattern +14085%%1XXX
E. Pattern 852[6-8]XX

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 210
http://www.passleader.com
Answer: CE

QUESTION 471
Which two statements about Zones on Cisco Expressways are correct? (Choose two.)

A. You can register endpoints to default zone.

B. Bandwidth for calls between endpoints in the same zone cannot be restricted.
C. Endpoints are associated to default subzone or any customized subzone depending on the IP
address of the endpoint.
D. A neighbor zone connects Cisco Expressway Core to other systems via SIP or H.323.
E. A neighbor zone connects Cisco Expressway Core to Cisco Expressway for NAT, PAT, and
firewall traversal.

Answer: BE

QUESTION 472
An engineer must verify that Expressway connects to Cisco Unified Communication Manager
using TLS.
Which menu navigation sequence accomplishes this task?

A. Configuration > Domains

B. Configuration > Dial plan > Transforms
C. Configuration > Dial plan > Search rules
D. Configuration > Zones > Zones

Answer: D

QUESTION 473
Which is the default SRST Certificate Provider port?

A. 5060
B. 2445
C. 16236
D. 2000

Answer: B

QUESTION 474
For endpoints that register to Cisco Unified Communications Manager, where do you change the
QoS priority class?

A. in Cisco Unified Communications Manager Administration, under Service > Service

Parameters > Cisco Call Manager Service > Clusterwide parameters
B. in Cisco Unified Communications Manager Administration, under Device > Phone
C. in Cisco Unified Communications Manager Administration, under System > Enterprise
Parameters
D. on each endpoint
E. in Cisco Unified Communications Manager Administration, under System > Location

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 211
http://www.passleader.com
Answer: A

QUESTION 475
Which route pattern is the best match in Cisco Unified Communications Manager for a dialed
number of +1 412 555 1234?

A. \+1412.XXXXXXX
B. +1!
C. ^\+1412.......$
D. \+1.!

Answer: A

QUESTION 476
Which default DSCP marking value do telepresence endpoints use for video?

A. CS4
B. CS2
C. AF41
D. EF

Answer: A

QUESTION 477
The phone model series for the physical device and user profile is matching (i.e.797x) in
Extension Mobility.
What Extension Mobility equivalency feature enables differences?

A. Size Safe
B. Call Display Restriction Features
C. CUCM Assistant Features
D. Feature Safe

Answer: A

QUESTION 478
Refer to the exhibit. What digits will be sent to the PSTN telco through 0/1/0:23 if the user dialed
9011443335343?

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 212
http://www.passleader.com
A. 3335343
B. 011443335343
C. 443335343
D. 9011443335343

Answer: B

QUESTION 479
Which is the default limit for learned objects in an Intercluster Lookup Service network configured
on Cisco Unified Communications Manager cluster?

A. 65535
B. 50000
C. 100000
D. unlimited

Answer: C

QUESTION 480
Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to
the secondary Call Manager server? (Choose two.)

A. Date/Time Group Configuration

B. Cisco Unified CM Group Configuration
C. Application Server Configuration
D. Device Pool Configuration
E. SRST Reference Configuration

Answer: BE

QUESTION 481
Which command does an engineer execute to find out the Cisco Unified Communications
Manager database replication status in CLI?

A. utils dbreplication clusterrest

B. utils dbreplication quickaudit
C. utils dbreplication rebuild
D. utils dbreplication runtimestate

Answer: D

QUESTION 482
Which two devices or applications support call preservation? (Choose two.)

A. JTAPI applications
B. CTI applications
C. a software conference bridge
D. an annunciator

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 213
http://www.passleader.com
E. SIP trunks

Answer: CE

QUESTION 483
An engineer is configuring Global Dial Plan Replication. On one cluster, she would like to prevent
the local cluster from routing calls to a specific pattern learned via ILS.
What should be configured within the local CUCM cluster to accomplish this?

A. Create a block transformation pattern.

B. Create a block route pattern.
C. Create a block translation pattern.
D. Create a block learned pattern.

Answer: C

Get Latest & Actual 300-075 Exam's Question and Answers from Passleader. 214
http://www.passleader.com