ICDL Advanced Word Processing 2016 3.0 - Light of Life International Christian School
Uploaded by
bamagezisnacksICDL Advanced Word Processing 2016 3.0 - Light of Life International Christian School
Uploaded by
bamagezisnacksProvided by:
Light of Life International Christian School
© 2015 COMAT Training Services Page i
Copyright ICDL Foundation 1997- 2019. All rights reserved. Reproducing, repurposing, or distributing this courseware without the
permission of ICDL Foundation is prohibited.
ICDL Foundation, ICDL Europe, ICDL, ECDL and related logos are registered business names and/or trademarks of ECDL Foundation.
This courseware may be used to assist candidates to prepare for the ICDL Foundation Certification Programme as titled on the courseware.
ICDL Foundation does not warrant that the use of this courseware publication will ensure passing of the tests for that ICDL Foundation
Certification Programme.
The material contained in this courseware does not guarantee that candidates will pass the test for the ICDL Foundation Certification
Programme. Any and all assessment items and / or performance-based exercises contained in this courseware relate solely to this
publication and do not constitute or imply certification by ICDL Foundation in respect of the ICDL Foundation Certification Programme or any
other ICDL Foundation test. This material does not constitute certification and does not lead to certification through any other process than
official ICDL Foundation certification testing.
Candidates using this courseware must be registered with the National Operator before undertaking a test for an ICDL Foundation
Certification Programme. Without a valid registration, the test(s) cannot be undertaken and no certificate, nor any other form of recognition,
can be given to a candidate. Registration should be undertaken at an Approved Test Centre.
Screen shots used with permission from Microsoft.
Page ii ICDL Advanced Word Processing 2016 S3.0 V1 17102017 © 2017
ICDL Advanced Word Processing
Developing your abilities in one of the most used computer applications can be a vital step in
furthering your professional career, and ICDL Advanced Word Processing will allow you to
demonstrate your expertise with regard to documents. Completion of this module will allow
you enhance quality and save time when creating, producing, reviewing and distributing
complex documents.
On completion of this module the candidate will be able to:
• Apply advanced text, paragraph, column and table formatting. Maintain a consistent
design through the use of character and paragraph styles.
• Work with referencing features like footnotes, endnotes and captions. Manage
citations and bibliography using a chose citation style. Create tables of contents,
indexes and cross-references.
• Enhance productivity by using fields, forms and templates.
• Apply advanced mail merge techniques and work with automation features like
macros.
• Use linking and embedding features to integrate data.
• Collaborate on and review documents locally or online. Apply document security
features.
• Work with watermarks, sections, and headers and footers in a document. Use
thesaurus and manage spell check settings.
What are the benefits of this module?
Building on your word processing applications skills, the ICDL Advanced Word Processing
module will help you to become more confident, efficient and effective in using these
applications. It will prove your mastery of this application, and give a professional touch to
documents you create and work on. Once you have developed the skills and knowledge set
out in this book, you will be in a position to become certified in an international standard in
this area - ICDL Advanced Word Processing.
For details of the specific areas of the ICDL Advanced Word Processing syllabus covered in
each section of this book, refer to the ICDL Presentation syllabus map at the end of the
book.
How to use this book
This book covers the entirety of the ICDL Advanced Word Processing course. It introduces
important concepts and sets out the specific steps associated with using different features of
the application. You will also have the opportunity to practice some of these activities
yourself using sample files provided in the Student Folder. It is recommended that you do
not save your changes to sample files, as you may want to practice an activity more than
once.
© 2017 UG000032 Page iii
Page iv UG000032 © 2017
ICDL ADVANCED WORD PROCESSING
LESSON 1 - REVISING WORD DOCUMENT FORMATTING ................................................... 1
1.1 Implementing Good Design and Formatting Practice .......................................................... 2
1.2 Applying Multi-Level Outline Numbering ............................................................................. 2
1.3 Modify Multi-Level Outline Numbering................................................................................. 3
1.4 Creating a Character Style .................................................................................................. 4
1.5 Modify and Update a Character Style.................................................................................. 5
1.6 Creating a Paragraph Style ................................................................................................. 6
1.7 Modify and Update a Paragraph Style................................................................................. 8
1.8 Automatic Text Formatting .................................................................................................. 8
1.9 Automatic Text Entries ........................................................................................................ 9
1.10 Apply Multiple Column Layout ......................................................................................... 11
1.11 Changing Column Width and Spacing ............................................................................. 12
1.12 Inserting/Removing Lines Between Columns .................................................................. 13
1.13 Inserting Fields................................................................................................................ 14
1.14 Updating Fields ............................................................................................................... 14
1.15 Creating Watermarks ...................................................................................................... 15
1.16 Using Advanced Layout Options ..................................................................................... 17
1.17 Using Find & Replace Options ........................................................................................ 18
1.18 Using the Paste Special Options Button .......................................................................... 19
1.19 Using Paragraph Pagination Options .............................................................................. 20
1.20 Protecting a Word Document .......................................................................................... 21
1.21 Review Exercise ............................................................................................................. 23
© 2017 UG000032 Page v
LESSON 2 - USING SECTION BREAKS................................................................................. 24
2.1 Working with Section Breaks............................................................................................. 25
2.2 Creating Section Breaks ................................................................................................... 25
2.3 Changing Page Orientation ............................................................................................... 26
2.4 Changing Margins for a Section ........................................................................................ 27
2.5 Apply Different Headers and Footers ................................................................................ 28
2.6 Apply First Page Header ................................................................................................... 29
2.7 Insert Automatic Page Numbering .................................................................................... 30
2.8 Review Exercise ............................................................................................................... 31
LESSON 3 – USING TABLE FEATURES................................................................................ 32
3.1 Apply Table AutoFormat/Style........................................................................................... 33
3.2 Splitting Table/Table Cell .................................................................................................. 34
3.3 Changing Cell Margins ...................................................................................................... 35
3.4 Changing Text Direction.................................................................................................... 36
3.5 Changing Text Alignment .................................................................................................. 37
3.6 Repeating Header Rows at Top of Each Page .................................................................. 38
3.7 Stop Table Row to Break Across Pages ........................................................................... 39
3.8 Sorting in Table ................................................................................................................. 41
3.9 Adding Formula in Table ................................................................................................... 42
3.10 Formatting Number Field ................................................................................................ 44
3.11 Converting a Table into Text ........................................................................................... 46
3.12 Converting Delimited Text to a Table .............................................................................. 47
3.13 Review Exercise ............................................................................................................. 49
LESSON 4 - WORKING WITH COMMENTS AND REVISIONS .............................................. 50
4.1 Enabling Change Tracking ................................................................................................ 51
4.2 Setting Change Tracking Options ..................................................................................... 52
Page vi UG000032 © 2017
4.3 Disabling Change Tracking ............................................................................................... 53
4.4 Comparing Documents ..................................................................................................... 54
4.5 Viewing Tracked Changes ................................................................................................ 56
4.6 Accepting/Rejecting All Changes ...................................................................................... 57
4.7 Inserting Comments .......................................................................................................... 58
4.8 Managing Comments ........................................................................................................ 59
4.9 Viewing and Navigating Comments................................................................................... 60
4.10 Work with Spell Check Language.................................................................................... 61
4.11 Using Thesaurus ............................................................................................................. 62
4.12 Review Exercise ............................................................................................................. 64
LESSON 5 - USING FORMS & PROTECTION ........................................................................ 65
5.1 Creating a Form ................................................................................................................ 66
5.2 Setting Properties for Controls .......................................................................................... 67
5.3 Protecting a Form ............................................................................................................. 69
5.4 Saving a Form as a Template ........................................................................................... 70
5.5 Modify the Default Template ............................................................................................. 73
5.6 Review Exercise ............................................................................................................... 75
LESSON 6 - CREATING MASTER DOCUMENTS .................................................................. 76
6.1 Using a Master Document ................................................................................................. 77
6.2 Inserting Subdocuments ................................................................................................... 78
6.3 Collapsing/Expanding Subdocuments ............................................................................... 80
6.4 Unlinking Subdocuments .................................................................................................. 80
6.5 Splitting and Merging Subdocuments ................................................................................ 81
6.6 Locking Subdocuments ..................................................................................................... 82
6.7 Opening Subdocuments.................................................................................................... 82
6.8 Review Exercise ............................................................................................................... 84
© 2017 UG000032 Page vii
LESSON 7 – CREATING CITATIONS AND BIBLIOGRAPHY ................................................... 85
7.1 Inserting and Editing Citations........................................................................................... 86
7.2 Set and Modify Citation Style ............................................................................................ 88
7.3 Create and Update a Bibliography .................................................................................... 89
LESSON 8 - CREATING A TABLE OF CONTENTS ............................................................... 91
8.1 Using a Table of Contents................................................................................................. 92
8.2 Creating a Table of Contents ............................................................................................ 92
8.3 Using Custom Styles ......................................................................................................... 95
8.4 Updating a Table of Contents............................................................................................ 97
8.5 Using Outline Levels ......................................................................................................... 97
8.6 Review Exercise ............................................................................................................. 100
LESSON 9 - CREATING AN INDEX ...................................................................................... 101
9.1 Using an Index ................................................................................................................ 102
9.2 Creating Main Index Entries ............................................................................................ 102
9.3 Creating Index Subentries............................................................................................... 103
9.4 Typing Index Entries ....................................................................................................... 105
9.5 Cross-referencing Index Entries ...................................................................................... 105
9.6 Generating an Index ....................................................................................................... 107
9.7 Updating an Index ........................................................................................................... 108
9.8 Review Exercise ............................................................................................................. 110
LESSON 10 - USING BOOKMARKS, CAPTIONS AND FOOTNOTES ................................. 111
10.1 Working with Bookmarks ............................................................................................... 112
10.2 Creating Bookmarks ..................................................................................................... 112
10.3 Viewing Bookmarks ...................................................................................................... 113
10.4 Going to a Bookmark .................................................................................................... 114
Page viii UG000032 © 2017
10.5 Cross-referencing to a Bookmark .................................................................................. 115
10.6 Deleting a Bookmark ..................................................................................................... 116
10.7 Inserting a Caption ........................................................................................................ 117
10.8 Inserting a Table of Figures........................................................................................... 118
10.9 Inserting a Cross-reference ........................................................................................... 119
10.10 Inserting Footnotes ..................................................................................................... 121
10.11 Setting Note Options ................................................................................................... 123
10.12 Convert Footnote to Endnote ...................................................................................... 124
10.13 Review Exercise ......................................................................................................... 125
LESSON 11 - USING MAIL MERGE...................................................................................... 126
11.1 Working with Mail Merge ............................................................................................... 127
11.2 Starting Mail Merge ....................................................................................................... 127
11.3 Identifying the Main Document ...................................................................................... 128
11.4 Creating a Recipient List ............................................................................................... 128
11.5 Customising Columns in a Recipient List ...................................................................... 129
11.6 Rearranging Columns in a Recipient List ...................................................................... 130
11.7 Saving a Recipient List.................................................................................................. 131
11.8 Entering Records into a Recipient List .......................................................................... 131
11.9 Sorting Records to be Merged ...................................................................................... 134
11.10 Highlighting Merge Fields ............................................................................................ 136
11.11 Inserting Merge Fields into a Document ...................................................................... 137
11.12 Previewing Merged Data ............................................................................................. 138
11.13 If-Then-Else Rule ........................................................................................................ 139
11.14 Merging to a New Document ....................................................................................... 139
11.15 Merging to the Printer.................................................................................................. 140
11.16 Review Exercise ......................................................................................................... 141
© 2017 UG000032 Page ix
LESSON 12 - LINKING/EMBEDDING OBJECTS.................................................................. 143
12.1 Create a Simple Chart................................................................................................... 144
12.2 Display a Linked Object as an Icon ............................................................................... 145
12.3 Embed Data as an Object ............................................................................................. 146
12.4 Updating a Link ............................................................................................................. 147
12.5 Breaking a Link ............................................................................................................. 148
LESSON 13 - USING MACROS ............................................................................................ 149
13.1 Recording a Macro ........................................................................................................ 150
13.2 Running a Macro........................................................................................................... 152
13.3 Adding a Macro Button to the Quick Access Toolbar..................................................... 153
13.4 Saving a Macro Enabled Document .............................................................................. 154
13.5 Deleting a Macro ........................................................................................................... 155
13.6 Review Exercise ........................................................................................................... 157
ICDL SYLLABUS ..................................................................................................................... 158
Page x UG000032 © 2017
LESSON 1 -
REVISING WORD DOCUMENT FORMATTING
In this section, you will learn about:
• Recognising good practice in maintaining consistent and accessible design
and format
• Applying multi-level outline numbering
• Modifying multi-level outline numbering
• Creating a character style
• Modifying and updating a character style
• Creating a paragraph style
• Modifying and updating a paragraph style
• Creating automatic text formatting/entries
• Applying multiple column layout
• Changing column width and spacing
• Inserting/removing lines between columns
• Inserting/updating fields
• Creating watermarks
• Using advanced layout options
• Using find & replace options
• Using paste special options
• Using paragraph pagination options
• Protecting a Word document
Lesson 1 - Revising Word Document Formatting ICDL Advanced Word Processing
1.1 IMPLEMENTING GOOD DESIGN AND FORMATTING
PRACTICE
Concepts
It is important to keep the design of a document consistent. Consistent documents
are easier and more pleasant to read. Styles allow you to keep the formatting in
your document consistent. A style is a collection of formatting commands under a
given name so it can be easily accessed.
Styles found in Word 2016
When inserting images, charts, shapes, SmartArt, or tables into a document, it can
be of great benefit to insert Alternative Text along with the object so that there is
context for the image if it is unclear to the reader. Ensuring this is consistent
throughout a document will improve the formatting and readability.
1.2 APPLYING MULTI-LEVEL OUTLINE NUMBERING
Concepts
The multilevel list feature is used to show a list of indented items at different levels.
Steps
Open PRDLIST.docx.
Add bullets or numbers to a multilevel list. Scroll as necessary to view all the text
under the Product Features heading.
1. Select the list items to which you want to add bullets Select the entire list from
or numbers. HandPhone to inkjet
The text is highlighted as you drag. technology
2. Release the mouse button. Release the mouse button
The text is selected.
Page 2 UG000032 © 2017
ICDL Advanced Word Processing Lesson 1 - Revising Word Document Formatting
3. Select the Home tab, if necessary. Click Home
The Home tab is displayed.
4. Select the Multilevel List button in the Paragraph
group.
The Multilevel List gallery opens.
Click
5. Select the desired multilevel list style from the List
Library section in the Multilevel List gallery.
The Multilevel List gallery closes and the selected
style is applied to the selected text. Click
Click anywhere in the document to deselect the list.
1.3 MODIFY MULTI-LEVEL OUTLINE NUMBERING
Steps
Modify a multilevel list.
Scroll as necessary to view all the text under the Product Features heading.
1. Select the list items to which you want to edit. Select the entire list from
The text is highlighted as you drag. HandPhone to inkjet
technology
2. Release the mouse button. Release the mouse button
The text is selected.
3. Select the Home tab, if necessary. Click Home
The Home tab is displayed.
4. Select the Multilevel List button in the Paragraph
group.
The Multilevel List gallery opens.
Click
5. Select the desired option from the gallery. Click Define New Multilevel
The Define new Multilevel List dialog box opens. List
6. Select the drop down arrow under Number style Click
for this level.
The list of number styles is displayed.
© 2017 UG000032 Page 3
Lesson 1 - Revising Word Document Formatting ICDL Advanced Word Processing
7. Select a number style from the list. Click I,II,III,…
The desired number style is selected.
8. Enter the desired text indention in the Text indent at Enter 1.27cm in the Text
box. indent at box
The desired text indention is entered in the box.
9. Select the OK button. Click OK
The dialog box closes and the number formatting is
applied.
Click anywhere in the document to deselect the list.
1.4 CREATING A CHARACTER STYLE
Concepts
As previously noted, styles are a useful method of maintaining consistent
formatting in a document. While paragraph styles are used to format and design a
full range of text throughout one or more paragraphs, a character style can be used
to format characters within a sentence or paragraph.
Examples of Character Styles
Steps
Open PRDLIST.docx.
To create a new style, you can format the relevant text and then create the style
based on that formatting.
1. Select the Home tab. Click Home
The Home tab is displayed.
2. Highlight the text that you want to apply a new Highlight the text Product – by
style to. order of sales
The text is highlighted as you drag.
3. Format the text as desired. Apply Bold and Italic
The text is formatted as intended for the new style
Page 4 UG000032 © 2017
ICDL Advanced Word Processing Lesson 1 - Revising Word Document Formatting
4. Select the Styles option.
The Styles submenu appears.
5. Click Create a Style.
6. The Create New Style from Formatting dialog Type Special Notes
box appears.
Enter a style name.
7. Click Modify… and select Character from the Click Character
Style type: dropdown list.
The Character option is selected.
8. Select OK. Click OK
The new style is created.
The new style has been created, and now appears as an option in the gallery.
1.5 MODIFY AND UPDATE A CHARACTER STYLE
Steps
Edit an existing style.
1. Select the Home tab. Click Home
The Home tab is displayed.
© 2017 UG000032 Page 5
Lesson 1 - Revising Word Document Formatting ICDL Advanced Word Processing
2. Click to launch the Style task pane.
3. Right mouse click on the style name. Right mouse click on Special
Notes
4. Click Modify.
5. The modify style dialog appear. Apply font Times New
Proceed to alter specific styles: font, paragraph, tabs, Roman
etc.
6. Click OK. Click OK
The existing style has been updated. Note that all instances of text with this style in
the document have been updated.
Close PRDLIST.docx without saving the changes.
1.6 CREATING A PARAGRAPH STYLE
Concepts
A paragraph style contains both character and paragraph formatting attributes that
can be applied to one or more paragraphs in a document.
Steps
Open PRODUCT.docx. Create a paragraph style.
1. Select the Home tab. Click Home
The Home tab is displayed.
2. Highlight the text that you want to apply a new style to. Drag to select Delivery
The text is highlighted as you drag.
Page 6 UG000032 © 2017
ICDL Advanced Word Processing Lesson 1 - Revising Word Document Formatting
3. Select the Styles dialog box launcher in the Styles
group.
The Styles pane is displayed.
Click
4. Select the New Styles button on the Styles pane.
The Create New Style from Formatting dialog box is
displayed. Click
5. Enter a name for the style in the Name box. Type StyleB in the Name box.
The desired style name is entered in the Name box.
6. Select the Modify… button to launch the Create New Click Modify
Style from Formatting box.
The expanded window with further options is opened.
7. Select the type of style you want to apply from the Select Paragraph from the
Style type drop down list. Style type list
The type of style is selected.
8. Select the format button to define the formats for the Click Format
paragraph.
The format paragraph dialog box is displayed.
9. Proceed to define the formats for the paragraph. Click Paragraph > Line
Use the Format paragraph button to increase line spacing > At least > 20pt
spacing to at least 20pt.
10. Select the OK button twice.
Click
The dialog box closes and the paragraph style is
applied to the selected text.
You can set different types of line spacing when formatting a paragraph. The default
style is Single, but you can also have 1.5 lines, Double, At least, Exactly and
Multiple. The latter three options gives you more defined options when setting line
spacing:
1. At least: this option enables you to select a minimum amount of space in
points (the font sizes are measured in points.)
2. Exactly: this option enables you to select an exact amount of space in points.
3. Multiple: this option enables you to select a multiple amount of line spacing in
lines.
© 2017 UG000032 Page 7
Lesson 1 - Revising Word Document Formatting ICDL Advanced Word Processing
1.7 MODIFY AND UPDATE A PARAGRAPH STYLE
Steps
Modify and update a paragraph style.
If necessary, display the Style pane.
1. Select the text that uses the style you want to modify. Drag to select Payment
The formatted text is selected.
2. Select the Manage Styles button in the Styles pane.
The Manage Styles dialog box is displayed.
Click
3. Select the Modify button. Click Modify
The Modify Style dialog box is displayed.
4. Select the Underline button.
The underline button is activated.
Click
5. Select the OK button to close the Modify Styles dialog Click OK
box.
The Modify Styles dialog box closes
6. Select the OK button to close the Manage Styles
Click
dialog box.
The Manage Styles dialog box closes and the selected
Style is updated with the changes.
Close PRODUCT.docx without saving the changes.
1.8 AUTOMATIC TEXT FORMATTING
Concepts
Having consistent formatting in documents saves time and provides a specific look
to your work. You can use the Autoformat as you Type feature in Word to easily
format the document while you complete it.
Page 8 UG000032 © 2017
ICDL Advanced Word Processing Lesson 1 - Revising Word Document Formatting
Steps
Open a blank document.
1. Open the Backstage View. Click File
The Backstage View is displayed.
2. Open the Word Options dialog box. Click Options
The Word Options dialog box is displayed.
3. Select the Proofing option. Click Proofing
Proofing settings appear.
4. Select the AutoCorrect Options button.
Click
AutoCorrect options appear.
5. Select the AutoFormat or AutoFormat As You Type Click AutoFormat
tab.
6. Select the necessary changes. Click the appropriate settings
The selection boxes are selected depending on your
preferences.
7. Implement the changes. Click OK
The changes are made.
1.9 AUTOMATIC TEXT ENTRIES
Concepts
AutoText is a feature in Word that allows you to insert repeated phrases, words or
paragraphs with a particular format that ensures accuracy and can help you
become more efficient with your work. To setup this process you must add text
entries to the AutoCorrect dialog box.
Steps
To create AutoCorrect entries. Open DRAW2.docx from the Student Folder.
1. Select the text from We are pleased to extend all the Highlight the text
way to paragraph space after Conservation Award.
The text is highlighted.
2. Open the Insert tab. Click Insert
The Insert tab is displayed.
© 2017 UG000032 Page 9
Lesson 1 - Revising Word Document Formatting ICDL Advanced Word Processing
3. Select the Quick Parts button, then Save Selection
to Quick Part Gallery.
The Create New Building Block dialog box appears.
Click
4. Fill in the information below the table before moving Fill in information for dialog
onto the next step. box
5. Save the new AutoText block. Click OK
The AutoText entry is saved.
6. Open a new blank document. Open a blank document
A blank document is displayed.
7. Open the Insert tab and click Quick Parts. Click Insert, then Quick Parts
The changes are made.
8. Put the cursor over AutoText and scroll to select the Click Invitation AutoText
entry you wish.
The entry is entered into the document.
Name: Invitation
Gallery: AutoText
Category: General
Description: Invitation to the Annual Awards dinner.
Save in: Normal
Options: Insert content only
Close the document without saving the changes.
You can modify an AutoText entry after it has been created, should it need to be
updated or you spot an error.
If necessary, open DRAW2.docx.
1. Edit the date September 11 to October 9, the time Edit and select the text
from 7 p.m. to 9 p.m. and the dress code from
“sporty.” to “formal.” Then highlight the text from
We are pleased to extend all the way to paragraph
space after Conservation Award.
The text is edited and selected.
2. Open the Insert tab. Click Insert
The Insert tab is displayed.
Page 10 UG000032 © 2017
ICDL Advanced Word Processing Lesson 1 - Revising Word Document Formatting
3. Select the Quick Parts button, then Save Selection
to Quick Part Gallery.
The Create New Building Block dialog box appears.
Click
4. Fill in the information below the previous table as Fill in information for dialog
before, then move onto the next step. box
5. Update the AutoText block. Click OK
Confirm that you want to update the AutoText entry.
The AutoText entry is now updated to match the changes made.
To delete an AutoText entry:
1. Open the Insert tab. Click Insert
The Insert tab is displayed.
2. Select the Quick Parts button, then Building Blocks
Organizer...
The Building Box Organizer window appears.
Click
3. Select the building block to remove. Scroll as necessary and select
The selection is highlighted. Invitation
4. Select Delete and choose Yes to confirm. Click Delete, then Yes
The AutoText entry is deleted.
Click Close to return to the document. Close DRAW2.docx without saving the
changes.
1.10 APPLY MULTIPLE COLUMN LAYOUT
Concepts
A multiple column layout is used to display information in two or more columns on
each page of a document, for example, a magazine or newspaper.
Steps
Open COLUMNS.docx and select the whole document.
© 2017 UG000032 Page 11
Lesson 1 - Revising Word Document Formatting ICDL Advanced Word Processing
1. Select the Layout tab. Click Layout
The Layout tab is displayed.
2. Select the Columns button in the Page Setup group.
The Columns menu opens.
Click
3. Select the desired number of columns. Click Two
The document text appears in the selected number of
columns.
Practice the concept: To balance the page, insert a column break in the
document. Place the cursor at the beginning of the paragraph “The Roll n Relax
Holiday Tours is staffed by an all-Asian crew”, click Layout tab, Breaks button,
and click Column.
To remove the column break, switch to the draft view, click on the column break
within the document and press the keyboard key [Delete].
1.11 CHANGING COLUMN WIDTH AND SPACING
Steps
Change column width and spacing.
1. Select the Layout tab. Click Layout
The Layout tab is displayed.
2. Select the Columns button in the Page Setup
group.
The Columns menu opens.
Click
3. Select the desired option from the menu. Click More Columns…
The Columns dialog box appears.
4. If required, deselect Equal column width. Deselect
The Equal column width option is deselected.
5. Select the Width box. Click inside the Width box.
The cursor appears in the Width box.
Page 12 UG000032 © 2017
ICDL Advanced Word Processing Lesson 1 - Revising Word Document Formatting
6. Enter the desired width of the columns. Enter 7.24cm in the Width
The desired width is entered in the box. boxes.
7. Select the Spacing box. Click inside the Spacing box.
The cursor appears in the Spacing box.
8. Enter the desired column spacing. Enter 0.76cm in the Spacing
The desired column spacing is entered in the box.
box.
9. Select the OK button. Click OK.
The Columns dialog box closes and the settings
are applied to the document.
1.12 INSERTING/REMOVING LINES BETWEEN
COLUMNS
Steps
Add a vertical line between columns.
1. Select the Layout tab. Click Layout
The Layout tab is displayed.
2. Select the Columns button in the Page
Setup group.
The Columns menu opens.
Click
3. Select the More Columns option. Click More Columns...
The Columns dialog box opens.
4. Select the Line between option. Click Line between
The Line between option is selected and a
line appears between each column in the
Preview box.
5. Select OK.
Click
The Columns dialog box closes, and the
vertical line appears between each column in
the document.
Close COLUMNS.docx without saving.
© 2017 UG000032 Page 13
Lesson 1 - Revising Word Document Formatting ICDL Advanced Word Processing
1.13 INSERTING FIELDS
Concepts
Fields are used by Word to automatically enter particular types of information in a
document, for example, author, file name and path file size, fill-in/input, page
numbers, Table of Contents, and performing calculations. The Quick Parts feature
in Word has a field option used to manually insert fields.
Steps
Open FIELDS.docx
If necessary, click on the right side of File Name: under the heading Sales Report.
1. Select the Insert tab. Click the Insert tab
The Insert tab is displayed.
2. Select the Quick Parts button in the Text group.
The Quick Parts menu opens.
Click
3. Select the desired option from the menu. Click Field
The Field dialog box is displayed.
4. Select the field you want to insert from the Field Click FileName
names list.
The field name is selected.
5. Select the OK button.
Click
The Field dialog box closes and the filename
FIELDS is inserted in the document.
1.14 UPDATING FIELDS
Steps
You decide to save a copy of the document using another file name. The FileName
field will have to be updated to reflect the change.
1. Select the File tab. Click File
The Backstage view opens.
Page 14 UG000032 © 2017
ICDL Advanced Word Processing Lesson 1 - Revising Word Document Formatting
2. Select an option from the menu. Click Save As
The desired option is selected.
3. Enter the desired file name in the File name box. Type SR2011
The file name is entered in the File name box.
4. Select the Save button.
Click
The Save As dialog box closes and the file name
is changed.
5. Select FIELDS to the right of File Name: Select the Filename FIELDS
The field is selected.
6. Press the F9 key on the keyboard. Press F9
The field is updated and displays the new file
name.
To prevent the automatic updating of a field in a document, select the field and
press [Ctrl+F11] to lock the field. To unlock a field and allow automatic update,
select the field and press [Ctrl+Shift+F11]. Close both files without saving and
delete SR2011.docx.
1.15 CREATING WATERMARKS
Concepts
A Watermark is faded text or an image displayed in the background of a document,
for example, a company logo or text that reads Confidential, Draft, or Do not Copy.
Watermark examples
© 2017 UG000032 Page 15
Lesson 1 - Revising Word Document Formatting ICDL Advanced Word Processing
Steps
Open COLUMNS.docx.
1. Select the Design tab. Click Design
The Design tab is displayed.
2. Select the Watermark button in the Page
Background group.
The Watermark gallery opens.
Click
3. Select the Custom Watermark option. Click Custom Watermark
The Printed Watermark dialog box opens.
4. To use a picture as a watermark, select the Click Picture watermark
Picture watermark option.
The Picture watermark option is selected.
5. Select the Select Picture button.
Click
The Insert Pictures dialog box opens.
6. Select the drive containing the Student Folder. Click From a file, Browse
A list of available folders and files is displayed.
You can insert a picture from a file on your
computer, select clip art from Office.com
7. Select the picture file you want to insert. Click SKIJUMP
The file is selected.
8. Select the left-hand part of the Insert button.
Click
The Insert Picture dialog box closes, and the
name and path of the selected picture file appear
in the Printed Watermark dialog box.
9. Select OK. Click OK
The Printed Watermark dialog box closes, and
the watermark appears in the document behind
the existing text.
Preview the document, notice that the watermark appears on each page. The
default formatting is Washout, so that the background image does not obscure the
text. Close COLUMNS.docx without saving.
Page 16 UG000032 © 2017
ICDL Advanced Word Processing Lesson 1 - Revising Word Document Formatting
1.16 USING ADVANCED LAYOUT OPTIONS
Concepts
The Advanced Layout dialog box provides options for precisely positioning an
object in a document, as well as for wrapping text around an object.
The Text Wrapping page in the Advanced Layout dialog box provides all possible
text-wrapping styles. In addition to selecting a text-wrapping style, you can control
to which side of an object the text wraps, as well as specify the distance between
the object and the text.
Steps
Use advanced layout options to position a graphic object on the page. Open
PACKAGE14.docx.
1. Select the graphic object you want to position. Click the road trip object
The object is selected.
2. Select the Picture Tools Format tab. Click Format
The Picture Tools Format tab is displayed.
3. Select the Position button in the Arrange group.
The Position gallery opens.
Click
4. Select the More Layout Options option. Click More Layout Options
The Layout dialog box opens.
5. Select the Text Wrapping tab. Click the Text Wrapping tab, if
The Text Wrapping page opens. necessary
6. Under Wrapping style, select the desired Click Square
wrapping style.
The wrapping style is selected.
7. Under Wrap text, select the side to which you Click Right only
want the text to wrap.
The option is selected.
8. Under Distance from text, enter the desired
measurement. Click Right to 0.25cm
The measurement appears in the spin box.
© 2017 UG000032 Page 17
Lesson 1 - Revising Word Document Formatting ICDL Advanced Word Processing
9. Select OK. Click OK
The Advanced Layout dialog box closes, and the
graphic object is positioned accordingly.
Click anywhere to deselect the object. Close PACKAGE14.docx without saving.
1.17 USING FIND & REPLACE OPTIONS
Concepts
Word 2016 can find and replace, text, phrases, font formats, paragraph formats,
paragraph marks and page breaks in a document.
Steps
Use the Find & Replace feature to change text. Open REPLACE.docx.
1. Select the Replace button from the Home tab.
The replace dialog box is displayed and the Find what: Click
box is active.
2. Enter the text that you want to replace in your Type Bicycle
document into the Find what: box.
The text appears in the Find what: box.
3. Click into the Replace with: box. Click Replace with: box
The Replace with: box becomes active.
4. Enter the new text that you want to replace the current Type Bike
text with.
The text appears in the Replace with: box.
5. Click the Replace All button.
All instances of the text in the Find what: box are Click
replaced with the text in the Replace with: box.
Use the Find & Replace feature to update a text format. If necessary, go to the top
of the document.
1. Select the Replace button from the Home tab.
The replace dialog box is displayed. Click
Page 18 UG000032 © 2017
ICDL Advanced Word Processing Lesson 1 - Revising Word Document Formatting
2. Click into the Find what box. Then select More.
Click , if
The Find and Replace dialog box expands to display
necessary
the Search Options section.
3. Select the format you want to find using the Format Click Format > Font
and Special dropdown buttons.
Leave blank for the Find what box.
4. Select the format to search for. Select Italic
The Find and Replace dialog box expands to display
the Search Options section.
5. Click OK Click OK
A list of available search filters appears, such as Font,
Italics etc.
6. Select the Replace With text box. Click Replace with, Format >
Leave blank for the Replace with box. Font
7. Select the format you want to replace with. Click Bold Italic
The option is selected
8. Click OK Click OK
The replace dialog box is closed. A message appears
with the number of replacements made.
9. Click Replace All. Click Replace All
Notice that the italic font is changed to bold and italic. Click anywhere in the
document to deselect the text.
1.18 USING THE PASTE SPECIAL OPTIONS BUTTON
Concepts
The Paste Special option is used to maintain or remove the formatting from text
that has been copied and then pasted using Paste Special, for example, if text with
bolding is copied and then pasted using the Unformatted text option within Paste
Special, the pasted text will not show bolding.
You can hide the Paste Options button by pressing the [Esc] key.
Steps
If necessary, display the Home tab and open PASTE.docx.
© 2017 UG000032 Page 19
Lesson 1 - Revising Word Document Formatting ICDL Advanced Word Processing
Scroll as necessary to view the Tour Newsletter Dated May 13, 2013 heading.
1. Select the text you want to move or copy. Drag to select the text Tour
The text is selected. Newsletter Dated May 13,
2013 heading
2. Cut or copy the text as desired. Click
The cut or copied text is placed on the Clipboard.
3. Position the insertion point in the location where you Scroll as necessary to the line
want to paste the text. below the last paragraph
The insertion point appears in the new location.
4. Select the bottom part of the Paste button on the
Clipboard group.
A Paste Options list appears below.
Click
5. Select the Paste Special button. Click Paste Special
A list of available paste options appears.
6. Select the desired option. Click unformatted text
The text is pasted accordingly.
Close the PASTE.docx file without saving.
1.19 USING PARAGRAPH PAGINATION OPTIONS
Concepts
Paragraph pagination gives you control how paragraphs are displayed within a
document, for example, Window/Orphan control prevents the last line of a
paragraph being displayed on a new page or the top line of a paragraph being
displayed at the bottom of the previous page. Keep with next is often used to keep a
paragraph and its title together when a page break occurs. Keeping lines together
will prevent a paragraph being split by a page break. Page break before will make a
paragraph start at the top of a page.
Steps
If necessary, display the Home tab and open TERMS.docx.
Scroll as necessary to view the Prices heading.
Page 20 UG000032 © 2017
ICDL Advanced Word Processing Lesson 1 - Revising Word Document Formatting
1. Select the text you want apply formatting to. Drag to select the text Prices
The text is selected. heading to the first paragraph
on the next page
2. Right mouse clicked. Right mouse click
The short cut menu is displayed.
3. Select Paragraph. Select Paragraph
The Paragraph dialog box appears.
4. Select the appropriate page from the Paragraph dialog Click Line and Page Breaks
box.
The Line and page break page is displayed.
5. Select the appropriate options from the pagination Checked Keep with next
section.
The option is selected.
6. Confirm the desired option. Click OK
The heading is kept with the paragraph on the next
page.
Close TERMS.docx without saving.
1.20 PROTECTING A WORD DOCUMENT
Concepts
You can add a password to protect a word document to stop other users from
editing it without permission. This can be a useful tool when working with sensitive
material, or documents that you want to make read-only with no editing function
available to those without access.
Steps
Create a new blank document.
1. Open the Backstage View. Click File
Backstage View is opened.
2. Select the Save As option and choose a folder to save Click Save As and then
to. Browse
The Save As dialog box appears.
© 2017 UG000032 Page 21
Lesson 1 - Revising Word Document Formatting ICDL Advanced Word Processing
3. Click the Tools button in the Save As window. Click Tools
A list of options appears.
4. Select the General Options option. Click General Options
The General Options window appears.
5. Enter a password into the appropriate option. Enter a password into the
The password is set for the selected option. Password to open box
6. Reconfirm the password after clicking OK. Click OK
The password will be applied with the selected
protection settings.
Delete the file upon completion.
Page 22 UG000032 © 2017
ICDL Advanced Word Processing Lesson 1 - Revising Word Document Formatting
1.21 REVIEW EXERCISE
Revising the formatting of a Word document
1. Open PACKAGE16.docx.
2. Scroll to page 2 and select from Product Features to well-trained, knowledgeable
sales staff.
3. Apply multi-level outline numbering.
4. Scroll to page 4 and select the Terms and Conditions of Sale heading. Create a new
style called Terms and Conditions.
© 2017 UG000032 Page 23
LESSON 2 -
USING SECTION BREAKS
In this section, you will learn how to:
• Work with Section Breaks
• Create Section Breaks
• Change Page Orientation
• Change Margins for a Section
• Apply Different Headers and Footers
• Apply First Page Header
• Insert Automatic Page Numbering
ICDL Advanced Word Processing Lesson 2 – Using Section Breaks
2.1 WORKING WITH SECTION BREAKS
Concepts
Section breaks make it possible to use more than one page layout in a document.
For example, the page numbering used in the introduction of a document may be
different from the page numbering used in the rest of the document, or a document
that contains several chapters may require a different header for each chapter.
When the document has section breaks each section can have a page layout
different from other sections.
Types of Section Breaks
2.2 CREATING SECTION BREAKS
Steps
Open AWARD1.docx.
Insert a Next Page section break. If necessary, show the formatting markings.
1. Position the insertion point where you want to Scroll as necessary and click to
create a new section. the left of the text Information
The insertion point appears in the new location.
2. Select the Layout tab. Click Layout
The Layout tab appears.
3. Select the Breaks button in the Page Setup
Click
group.
The Section Breaks menu appears.
© 2017 UG000032 Page 25
Lesson 2 – Using Section Breaks ICDL Advanced Word Processing
4. Select the Next Page option. Click Next Page
The Section Breaks menu closes, a Next Page
section break appears at the insertion point, and
the automatic pagination is adjusted accordingly.
2.3 CHANGING PAGE ORIENTATION
Concepts
You can change the orientation of a page to optimise its layout for whatever
purpose it serves. This will affect how the document will look when printed, as well
as when viewing it in Microsoft Word.
Steps
Format a section of a document.
1. Position the insertion point in the section you If necessary, click to the left of
want to format. the text Information
The insertion point appears in the new location.
2. Select the Layout tab. Click Layout
The Layout tab appears.
3. Select the Orientation button in the Page
Setup Group.
The selected layout is applied to the section.
Click
4. Select the desired option. Click Landscape
The page changes to the selected layout.
Page 26 UG000032 © 2017
ICDL Advanced Word Processing Lesson 2 – Using Section Breaks
2.4 CHANGING MARGINS FOR A SECTION
Concepts
Page margins are the blank space surrounding a page and set a boundary for the
text and content inserted into the document. You can adjust these settings to suit
your needs depending on the document’s purpose.
Page margin examples
Steps
Changing margins in a section.
1. Position the insertion point in the section you If necessary, click to the left of
want to format. the text Information
The insertion point appears in the new location.
2. Select the Layout tab. Click Layout
The Layout tab appears.
3. Select the Margins button in the Page Setup
Group.
Click
4. Select the desired option. Click Narrow
The page changes to the selected layout.
Practice the concept: To locate a section break that was inserted in the document,
select Home tab, Find, Advanced Find, Go To. Select Section under the Go to
What: section.
© 2017 UG000032 Page 27
Lesson 2 – Using Section Breaks ICDL Advanced Word Processing
Close AWARD1.docx.
2.5 APPLY DIFFERENT HEADERS AND FOOTERS
Concepts
You can make use of the different footer feature to change the page numbering
format between content page and main document.
Steps
Open DIFHEAD.docx.
1. Position the insertion point in the section you Browse to the 2nd Page and click
want to format. anywhere on the page
The insertion point appears in the new location.
2. Select the Insert tab. Click Insert
The Insert tab appears.
3. Select the Footer button in the Header and
Footer Group.
The list of options is displayed.
Click
4. Select the Edit Footer option. Click Edit Footer
5. Select the Link to Previous button to disable it.
The Link to Previous option is disabled. Click
Page 28 UG000032 © 2017
ICDL Advanced Word Processing Lesson 2 – Using Section Breaks
6. Use the Page number button to apply different
numbering format for the page.
Ensure page number is selected.
Click
7. Select the desired option from the menu. Select Current Position
The desired option is selected.
8. Select the desired page number format. Select Brackets
The page number is inserted in the document.
Close DIFHEAD.docx.
2.6 APPLY FIRST PAGE HEADER
Concepts
One of the design options for a header or footer is the option to have a first page
header and footer that is different from the rest of the document.
Steps
Open FIRSTHEAD.docx.
1. Select the Insert tab. Click Insert
The Insert tab appears.
2. Select the Header button in the Header and
Footer Group.
The list of options is displayed.
Click
3. Select the desired option.
The Header & Footer Tools Design tab is Click
displayed.
4. Select Different First Page in the Options Tick the Different First Page
group. box
The Different First Page option is selected.
© 2017 UG000032 Page 29
Lesson 2 – Using Section Breaks ICDL Advanced Word Processing
5. Select the Header button in the Header and
Footer Group.
The list of options is displayed.
Click
6. Select the desired header from the list. Click Austin
The selected header is displayed on the first
page only.
2.7 INSERT AUTOMATIC PAGE NUMBERING
Steps
Insert page numbers in a document.
1. Select the page where you want to insert the Navigate to the 2nd page of the
footer. document
The page is selected.
2. Select the Insert tab. Click Insert
The Insert tab appears.
3. Select the Page Number button in the Header
& Footer group.
Click
4. Select the desired option from the menu. Select Bottom of Page
The desired option is selected.
5. Select the desired page number format. Select Accent Bar 1
The page number is inserted in the document.
Close FIRSTHEAD.docx.
Page 30 UG000032 © 2017
ICDL Advanced Word Processing Lesson 2 – Using Section Breaks
2.8 REVIEW EXERCISE
Use a section break to modify the page format of a document
1. Open SERSTBL.docx.
2. Create a next page section break to place the table title, the table, and the
graph on a separate section of the document.
3. Change the orientation of the page containing the table to landscape. (Hint:
Select the Layout tab.)
4. Select the View tab and use the Multiple Pages button to view the whole
document. Then, select the 100% button.
5. Return to the normal sized view by clicking One Page, and then close the
document without saving it.
© 2017 UG000032 Page 31
LESSON 3 –
USING TABLE FEATURES
In this section, you will learn how to:
• Apply AutoFormat/style
• Change cell margins
• Change text direction
• Change text alignment
• Repeat heading rows at top of each page
• Set table row to break across pages
• Add table formula
• Format number field
• Convert a table into text
• Convert delimited text to a table
ICDL Advanced Word Processing Lesson 3 – Using Table Features
3.1 APPLY TABLE AUTOFORMAT/STYLE
Concepts
The Table Styles option on the ribbon contains a selection of predesigned styles
that can easily be applied to a table. The styles contain various types of borders,
shading, colouring and text formatting. Before applying a style it is possible to
preview how the table will look by hovering the mouse over any of the available
styles.
Table Style Options
Steps
From the Student Folder, open TableStyle.docx.
© 2017 UG000032 Page 33
Lesson 3 – Using Table Features ICDL Advanced Word Processing
Use table styles:
1. Position the insertion point anywhere in the table Click anywhere in the table
you want to format.
The insertion point appears in the new location,
and the Table Tools Design and Layout tabs
are made available on the Ribbon.
2. Select the Table Tools Design tab. Click Table Tools Design
The Table Tools Design tab is displayed.
3. Position the pointer over the Table Styles Hover the pointer over any table
option buttons in the Table Styles group to style button in the Table Styles
preview the formatting. group
The table style is temporarily applied in live
preview to the table in the document.
4. Scroll through or expand the list of table styles Click
using the scroll or More buttons.
The Table Styles gallery is scrolled or opened,
giving access to all available styles.
5. Select the desired table style. Scroll as necessary and click
The selected table style is applied to the table in Grid Table 4 – Accent 2
the document and the Table Styles gallery
closes.
3.2 SPLITTING TABLE/TABLE CELL
Concepts
You can combine two or more cells in the same row or column into a single cell by
using the merge feature. You can reverse the feature using the split function.
Steps
1. Position the insertion point anywhere in the cell Click the first table row
you want to split.
The insertion point appears in the location, and
the Table Tools Design and Layout tabs are
made available on the Ribbon.
2. Select the Table Tools Layout tab. Click Table Tools Layout
The Table Tools Layout tab is displayed.
Page 34 UG000032 © 2017
ICDL Advanced Word Processing Lesson 3 – Using Table Features
3. Position the pointer over the Merge group. Click Split Cells
The split cells dialog box is displayed.
4. Enter the number columns cells to split into. Enter 2 for number of columns
The split cells dialog box is displayed.
5. Click OK. Click OK
The split cell is displayed.
Reverse the split cell by selecting both cells and clicking Merge Cells.
Keep TABLESTYLES.docx open.
Steps
To split a table into two separate tables. From the Student Folder, open
TABLESPLIT.docx.
1. Select the row that is to become the first row of Scroll to page three and select
the new table. the third last row from SalesRep
The row is selected. to Comments
2. Select the Table Tools Layout tab. Click Table Tools Layout
The Table Tools Layout tab is displayed.
3. Select the Split Table button in the Merge
group.
The table is split into two separate tables,
separated by a paragraph mark. Click
To merge the split table into a single table, delete the paragraph mark between both
tables.
Close TABLESPLIT.docx without saving.
3.3 CHANGING CELL MARGINS
Concepts
By default every cell in a table will have the same margins. This prevents any cell
content from touching the borders of the cell and possibly making it difficult to read.
Sometimes the margins for one or more cells within a table need to be increased.
© 2017 UG000032 Page 35
Lesson 3 – Using Table Features ICDL Advanced Word Processing
This can be done by selecting the cells, clicking on Cell Margins and entering new
values for cell margins in Table Options.
Cell Margins button
Steps
Change margins in table cells. The TABLESTYLE.docx file should still be open.
1. Select the cells you want format. Press the icon at the top left
The cells are selected. corner of the table
2. Select the Table Tools Layout tab. Click Table Tools Layout
The Table Tools Layout tab is displayed.
3. Click the Cell Margins button in the Alignment
group to the desired orientation.
The table options dialog box appears.
Click
4. Enter the settings you want to apply to the Enter 0.127cm for both Top
table. and Bottom margins
The table margin settings are entered.
5. Select the OK button to apply the settings. Click OK
The cell margin settings are applied.
3.4 CHANGING TEXT DIRECTION
Concepts
Text orientation in a cell can be changed to vertical or horizontal.
Page 36 UG000032 © 2017
ICDL Advanced Word Processing Lesson 3 – Using Table Features
Text Direction button
Steps
Rotate text in a table.
1. Select the cell(s) containing the text you want to Select the 2nd Row
rotate.
The cells are selected.
2. Select the Table Tools Layout tab. Click Table Tools Layout
The Table Tools Layout tab is displayed.
3. Click the Text Direction button in the
Alignment group to the desired orientation.
The text orientation changes accordingly.
Click twice
3.5 CHANGING TEXT ALIGNMENT
Concepts
There are several ways to change the alignment of text in a cell. You can use the
paragraph alignment options: Align Left, Center, Align Right, or use the table layout
alignment options: Align top left, Align center left, Align bottom left, Align top
center, Align center, Align bottom center, Align top right, Align center right, Align
bottom right.
Table Tools Layout Contextual tab
© 2017 UG000032 Page 37
Lesson 3 – Using Table Features ICDL Advanced Word Processing
Steps
Align table text.
1. Select the cell containing the text you want to Click the cell containing the
align. heading Roll ‘n’ Relax Holiday
The cell is selected. Tours
2. Select the Table Tools Layout tab. Click Table Tools Layout
The Table Tools Layout tab is displayed.
3. Select the desired Align button from the gallery
in the Alignment group. Click Align Center
The text in the cell is aligned accordingly. (second row, second column)
3.6 REPEATING HEADER ROWS AT TOP OF EACH
PAGE
Concepts
For a table that extends across two or more pages, Word provides an option to
display the header row of the table (which usually displays column headings) at the
top of each page.
Repeat Header Rows button
Steps
Repeating Heading Rows.
If necessary, switch to Print Layout view.
1. Select the row or rows you want to repeat as a Select the top two rows of the
table heading. table
The rows are selected.
Page 38 UG000032 © 2017
ICDL Advanced Word Processing Lesson 3 – Using Table Features
2. Select the Table Tools Layout tab. Click Table Tools Layout
The Table Tools Layout tab is displayed.
3. Select the Repeat Header Rows button in the
Data group.
The table heading is created.
Click
Preview the document in Backstage view. Notice that the table heading appears on
each page.
Close TableStyle.docx without saving.
3.7 STOP TABLE ROW TO BREAK ACROSS PAGES
Concepts
When a large table is displayed on two or more pages, the content in the last row
at the end of a page may split between two pages. To keep the content in the row
together, Table Properties has an option to not allow a row to break across pages.
Table Properties Dialog Box
© 2017 UG000032 Page 39
Lesson 3 – Using Table Features ICDL Advanced Word Processing
Steps
From the Student Folder, open TABLEBREAK.docx.
Set table rows to break across pages. Preview the document to view the table size
and placement on the page.
1. Select the cell, row, or column you want to Click the last row of that table on
change. the first page
The cell, row, or column is selected.
2. Select the Table Tools Layout tab. Click Table Tools Layout
The Table Tools Layout tab is displayed.
3. Select the Properties button in the Table group.
The Table Properties dialog box opens.
Click
4. Select the tab for the property you want to Click the Row tab, if necessary
change.
The corresponding page is displayed.
5. Select the desired option. Click
The option is selected. to
deselect it
6. Select OK. Click OK
The Table Properties dialog box closes, and the
selection is modified accordingly.
Note: Word will automatically repaginate the document to split the table so that
each row is kept intact. This means that a row which was previously split between
two pages will move onto the following page.
You can also apply this feature to the entire table by selecting the entire table by
clicking and following the same steps as above.
Close TABLEBREAK.docx without saving.
Page 40 UG000032 © 2017
ICDL Advanced Word Processing Lesson 3 – Using Table Features
3.8 SORTING IN TABLE
Concepts
Occasionally you may need to sort a table by more than one column. For example,
if an address list is sorted by last name and the list has two last names called
Brown, then to differentiate between the two Browns, you could sort by last name
and then by first name.
Steps
From the Student Folder, open TABLE2.docx.
1. Position the insertion point anywhere in the table you Click anywhere in the table
want to sort.
The insertion point is placed in the table.
2. Select the Table Tools Layout contextual tab on the Click Table Tools Layout
Ribbon.
The Table Tools Layout contextual tab is displayed.
3. Select the Sort button in the Data group.
The Sort dialog box opens with a column header
selected in the Sort by box. Click
4. Under My list has, select the desired option based on Click Header row, if
whether the table has a Header row. necessary
The option is selected.
5. Select the Sort by list.
Click Sort by
A list of available column headings is displayed.
6. Select the column by which you want to sort first. Click Retail Price
The column heading is displayed in the Sort by box.
The Number criterion is displayed in the Type box.
7. Select the Ascending or Descending option, as Click Ascending, if
desired. necessary
The sort order is selected.
8. Select the first Then by list.
Click the first Then by
A list of available column headings is displayed.
9. Select the column by which you want to sort next. Click Release Date
The column heading is displayed in the first Then by
box. The Date criterion is displayed in the Type box
accordingly.
© 2017 UG000032 Page 41
Lesson 3 – Using Table Features ICDL Advanced Word Processing
10. Select the Ascending or Descending option, as Click Descending
desired.
The sort order is selected.
11. Select the second Then by list. Click the second Then by
A list of available column headings is displayed.
12. Select the column by which you want to sort next. Click Product
The column heading is displayed in the second Then
by box. The Text criterion is displayed in the Type box
accordingly.
13. Select the Ascending or Descending option, as Click Ascending, if
desired. necessary
The sort order is selected.
14. Select OK.
Click
The Sort dialog box closes. The table is sorted by
multiple columns, in the order specified.
Close TABLE2.docx without saving.
3.9 ADDING FORMULA IN TABLE
Concepts
When a table in a document contains a list of numbers that need a total, you can
insert a sum formula field that will automatically calculate and display the sum
result. The sum formula field will also update the sum result if there are changes
made to any of the numbers in the list, helping to keep the document accurate and
error free.
Note: You can't just add up numbers on different lines - you can only add up
numbers that are presented in either a column or a row inside a table.
Formula button
Page 42 UG000032 © 2017
ICDL Advanced Word Processing Lesson 3 – Using Table Features
Formula Dialog Box for adding formula in the Sales Table
Steps
From the Student Folder, open SALESTABLE.docx.
Inserting a formula in a table.
1. Select the cell where you want the formula to be Select the empty cell to the right
inserted. of Profit beside Alicia Goh’s
The cell empty cell is selected. name
2. Select the Table Tools Layout tab under the Click Table Tools Layout
Table Tools Layout contextual tab.
The Table Tools Layout ribbon is displayed.
3. Select the Formula button in the Data group.
The Formula dialog box appears.
Click
4. Select the format you want to apply from the Select €#,##0.00;(€#,##0.00)
Number format drop-down list. from the Number format list
The number format is selected.
© 2017 UG000032 Page 43
Lesson 3 – Using Table Features ICDL Advanced Word Processing
5. Select the OK button to insert the formula. Click OK
The Formula dialog box closes and the formula
is inserted in the table.
You can press [Alt+F9] to view the formula results instead of the field codes.
Change the Profit value for Alicia Goh from 27,000 to 17,000. Notice that the value
in the Total column is not changed. To refresh the value, select the value and press
F9. Notice, that the value in the Total column is updated now.
Repeat the steps above for each of the SalesReps. However, make sure the
formula reads as =SUM(LEFT).
Note: the currency symbol will vary depending on your location, relevant to your
personal settings.
3.10 FORMATTING NUMBER FIELD
Concepts
Formatting the numbers in the formula using the Formula Dialog Box
Page 44 UG000032 © 2017
ICDL Advanced Word Processing Lesson 3 – Using Table Features
Sales Table showing the Total Row formatted as Currency
Steps
Formatting a number field.
1. Select the field that you want to format. Select the formula field next to
The field is selected. Total under the Sales column
2. Select the Table Tools Layout contextual tab. Click Table Tools Layout
The Table Tools Layout ribbon is displayed.
3. Select the Formula button in the Data group.
The Formula dialog box appears.
Click
4. Select the format you want to apply from the Select #,##0.00 from the
Number format drop-down list. Number format list
The number format is selected.
5. Select the OK button to apply the format to the Click OK
field.
The dialog box closes and the formatting is
applied to the field.
The number in the Total row now appears without the currency symbol but with the
layout of how monetary figures are written.
Close SALESTABLE.docx without saving.
© 2017 UG000032 Page 45
Lesson 3 – Using Table Features ICDL Advanced Word Processing
3.11 CONVERTING A TABLE INTO TEXT
Concepts
Table Tools Layout Contextual tab Showing Convert
Word Table
Table converted to Text
Steps
From the Student Folder, open EARNINGS.docx.
Convert a table into text.
1. Select the table rows you want to convert. Select the entire table
The table rows are selected.
2. Select the Table Tools Layout tab. Click Table Tools Layout
The Table Tools Layout tab is displayed.
3. Select the Convert to Text button in the Data
group.
The Convert Table To Text dialog box opens.
Select
4. Under Separate text with, select the desired Click Tabs
option.
The option is selected.
Page 46 UG000032 © 2017
ICDL Advanced Word Processing Lesson 3 – Using Table Features
5. Select OK. Click OK
The Convert Table To Text dialog box closes,
and the table is converted to text.
Click anywhere to deselect the text.
Display the formatting marks. Notice that a tab now appears in place of each
column marker and a paragraph mark has replaced each end of row mark. Hide the
formatting marks.
Close EARNINGS.docx without saving.
3.12 CONVERTING DELIMITED TEXT TO A TABLE
Concepts
If you have a list created in Word and you want the list to be converted to a table,
you can use the Convert Text to Table feature in Word.
Steps
From the Student Folder, open TEXTTAB.docx.
Convert existing text into a table.
1. Select the text you want to convert into a table. Press [Ctrl+A]
The text is selected.
2. Select the Insert tab. Click Insert
The Insert tab is displayed.
3. Select the Table button in the Tables group.
The Insert Table menu opens.
Click
4. Select the Convert Text to Table option. Click Convert Text to Table
The Convert Text to Table dialog box opens.
© 2017 UG000032 Page 47
Lesson 3 – Using Table Features ICDL Advanced Word Processing
5. If necessary, specify the desired number of table Click Tabs, if necessary
columns in the Number of columns spin box
under Table size, or select the desired
Separate text at option.
The number in the Number of columns spin
box changes accordingly or the appropriate
option is selected.
6. Select the desired AutoFit behavior option.
The desired AutoFit behavior option is Click Fixed column width
selected. to Auto, if necessary
7. Select OK. Click OK
The Convert Text to Table dialog box closes, and
the existing text is converted into a table.
Click anywhere in the document to deselect the table.
Close TEXTTAB.docx without saving.
Page 48 UG000032 © 2017
ICDL Advanced Word Processing Lesson 3 – Using Table Features
3.13 REVIEW EXERCISE
Using table features
1. Open TABLEEX1.docx.
2. Select any cell inside the table.
3. Select the Design tab under the title Table Tools.
4. Apply the List Table 1 Light – Accent 4 format to the table.
5. Close TABLEEX1.docx without saving and open EQUIPTBL.docx.
6. Select the contents of the entire document.
7. Display the Insert tab.
8. Use the Table button in the Tables group to convert the selected text into a
table. Use the tilde character (~) as the text separator (type it in the Other text
box). Word should suggest two columns. If necessary, select a fixed column
width of Auto.
9. Deselect the text to view the table.
10. Close the EQUIPTBL.docx without saving.
© 2017 UG000032 Page 49
LESSON 4 -
WORKING WITH COMMENTS AND REVISIONS
In this section, you will learn about:
• Enabling change tracking
• Setting change tracking options
• Disabling change tracking
• Comparing documents
• Viewing tracked changes
• Accepting/rejecting all changes
• Inserting comments
• Managing comments
• Viewing and navigating comments
ICDL Advanced Word Processing Lesson 4 - Working with Comments and Revisions
4.1 ENABLING CHANGE TRACKING
Concepts
When one or more people are sent a document to review they can turn on the
Track Changes feature in Word. This will keep track of and mark up any
suggested changes a reviewer makes to the document. When the author receives
the document from the reviewer they will see the suggested changes highlighted
and can choose to accept or reject each change.
Track Changes
Steps
Open TRACK1.docx.
Enabling change tracking.
1. Select the Review tab on the Ribbon. Click Review
The Review tab is displayed.
2. Select the top part of the Track Changes button Click Track Changes
in the Tracking group.
The background of the button changes to a dark
grey and change tracking is enabled.
© 2017 UG000032 Page 51
Lesson 4 - Working with Comments and Revisions ICDL Advanced Word Processing
Note: You can track changes made to a document in Word Online however it is not
possible to enable, disable or view Track Changes in Word Online. You can
enable track changes in a document offline, and when the document is opened in
Word Online TRACK CHANGES: ON will appear in the status bar. Any changes
made to the document will be tracked.
4.2 SETTING CHANGE TRACKING OPTIONS
Concepts
The Track Changes Options include an Advanced Options button that allows the
user to set markup formatting, indicators and colour for each classification.
Advanced Track Changes Options
Steps
Set change tracking options.
Page 52 UG000032 © 2017
ICDL Advanced Word Processing Lesson 4 - Working with Comments and Revisions
If necessary, switch to Print Layout view and activate change tracking.
1. Select the Review tab on the Ribbon. Click Review
The Review tab is displayed.
2. Click at small arrow at the bottom right corner of
the Tracking option box under the Review tab.
The Track Changes Options dialog box opens.
3. Select the desired options. Click Advanced Options…
User may enable or disable the detailed tracking
indicators and adjust markup view and reviewing
pane according. In addition, user names can be
changed by clicking the Change User Name
button at the bottom right of the window.
4. Modify the Insertions drop down list. Select Double underline
5. Select OK.
Click
The Track Changes Options dialog box closes.
4.3 DISABLING CHANGE TRACKING
Steps
Disable change tracking.
1. Select the Review tab on the Ribbon. Click Review
The Review tab is displayed.
2. Select the top part of the Track Changes button Click Track Changes
in the Tracking group.
The button background loses the dark grey
colour and change tracking is disabled.
Close TRACK1.docx.
Note: It is not possible to disable Track Changes in Word Online. The document
must be opened in the desktop application before Track Changes can be turned off.
© 2017 UG000032 Page 53
Lesson 4 - Working with Comments and Revisions ICDL Advanced Word Processing
4.4 COMPARING DOCUMENTS
Concepts
If you want to compare an earlier version of a document with the current version of a
document, you can compare the documents and then merge the changes into one
document.
Compare Documents list options
Steps
Compare two documents.
If necessary, close any open documents (including blank documents, but keep
Word open).
1. Select the Review tab. Click Review
The Review tab is displayed.
2. Select the Compare button in the Compare
group.
The Compare menu opens.
Click
3. Select Compare from the menu. Click the Compare option in the
The Compare Documents dialog box opens. menu
4. Select the Browse for Original button to the
right of the Original document box. Click beside the Original
The Open dialog box opens. document box
Page 54 UG000032 © 2017
ICDL Advanced Word Processing Lesson 4 - Working with Comments and Revisions
5. Open the folder where the file you want to Select the original document
merge is stored. The filename is displayed in REV_1.docx
the Original document box.
6. Select the Browse for Revised button to the Select the Revised document
right of the Revised document box. REV_EK.docx
The filename is displayed in the Revised
document box and the name of the last
person who saved changes in the Revised
document is displayed in the Label changes
with box.
7. Select the OK button.
Click
The documents are compared and a new
version of the document with the differences
marked as tracked changes is displayed in
the Compared Document pane. The Vertical
Reviewing Pane is displayed to the left of the
Compared Document pane. The Original
Document and Revised Document are
displayed in two more panes to the right of the
Compared Document pane.
© 2017 UG000032 Page 55
Lesson 4 - Working with Comments and Revisions ICDL Advanced Word Processing
4.5 VIEWING TRACKED CHANGES
Concepts
The only way to remove tracked changes from a document is to accept or reject
them. Choosing No Markup in the Display for Review box helps you see what the
final document will look like without the track changes — but it only hides tracked
changes from view. The changes are not deleted, and they’ll show up again the
next time anyone opens the document. To delete the tracked changes
permanently, accept or reject them.
Track changes accept/reject functions
Steps
Review tracked changes.
If necessary, select the Review tab. Open the REVISED.docx.
1. Position the insertion point where you want to Press [Ctrl+Home]
begin reviewing changes.
The insertion point moves to the selected
position.
2. Select the Review tab. Click Review
The Review tab is displayed.
3. Select Simple Markup from the Display for Click Simple Markup
Review drop-down menu.
4. Word marks up any changes that anyone makes
to the document and shows you where the
changes are by displaying a line near the
margin.
5. Word shows a little balloon where someone’s
made a comment
Page 56 UG000032 © 2017
ICDL Advanced Word Processing Lesson 4 - Working with Comments and Revisions
Note: It is not possible to view tracked changes in Word Online. The document
must be opened in the desktop application to view any changes. you will know that
track changes is on in Word Online when you see the message ‘Track Changes On’
in the status bar at the bottom of Word Online.
4.6 ACCEPTING/REJECTING ALL CHANGES
Concepts
There are multiple ways to accept the changes suggested in your document. You
can highlight and choose each change and accept them individually, or simply click
on the Accept button, allowing the app to scroll through the document for you.
Finally, you can Accept All Changes at once, or Accept All Changes and Stop
Tracking which will disable the track changes feature in the document.
Steps
Accept or reject all tracked changes.
If necessary, switch to Print Layout view.
1. Select the Review tab. Click Review
The Review tab is displayed.
2. Position the insertion point where you want to Point cursor to the left of Art of
begin reviewing changes. Touring in Style
The insertion point moves to the selected
position.
© 2017 UG000032 Page 57
Lesson 4 - Working with Comments and Revisions ICDL Advanced Word Processing
3. Accept a change in the document. Click Accept
The markup will disappear, and Word will
automatically jump to the next change. You can
continue accepting or rejecting each change until
you have reviewed them all.
4. Select Accept All Changes to remove the Click Accept All Changes
markup.
All changes currently displayed are accepted
and the appropriate revision marks and markup
balloons are removed from the document.
Comments are not classed as a change and
remain in the document.
5. Rejecting changes in the document can also be Click Reject or Reject All
done by clicking the Reject button to reject Changes
individually, or selecting the Reject arrow and
rejecting all changes made in a document.
If a document is being worked on by multiple people at different or the same times,
the original editor may wish to restrict the track change capabilities of other authors.
To set restriction on tracking document, click Review tab, and click Restrict
Editing from the Protect group. Click on the checkbox of 2. Editing restrictions,
select Tracked Changes from the dropdown list. Click Yes, Start Enforcing
Protection.
Close REVISED.docx without saving.
Note: You cannot accept or reject tracked changes using Word Online. The
document must be opened in the desktop application to complete this task.
4.7 INSERTING COMMENTS
Steps
Open COMMENT.docx.
If necessary, switch to Print Layout view.
Page 58 UG000032 © 2017
ICDL Advanced Word Processing Lesson 4 - Working with Comments and Revisions
1. Select the text to which you want to attach a Drag to select the first
comment. paragraph heading
The text is selected.
2. Select the Review tab. Click Review
The Review tab is displayed.
3. Select the New Comment button in the
Comments group.
A new balloon appears in the Markup Area and
comment marks surround the selected text. Click
4. Enter the desired comment. Type Include more offerings
The comment text appears in the markup
balloon.
5. Click anywhere outside the markup balloon. Click anywhere outside the
The insertion point appears in the document text. markup balloon
Note: To insert a comment using Word Online, follow steps 1 to 4 but click the
button in the bottom right corner of the new comment to insert instead of
clicking anywhere outside the markup balloon.
4.8 MANAGING COMMENTS
Steps
View comments in a document.
If necessary, switch to Print Layout view.
1. Select the Review tab. Click Review
The Review tab is displayed.
2. Select the Show Markup button in the Tracking Click Show Markup
group.
A list of available options is displayed.
3. Point to Reviewers. Point to Specific People
A list of all document reviewers is displayed.
© 2017 UG000032 Page 59
Lesson 4 - Working with Comments and Revisions ICDL Advanced Word Processing
4. Select or deselect the reviewer whose Click All Reviewers
comments you want to view or hide,
respectively, or select All Reviewers.
The comments of the selected reviewers or
those of all reviewers appear or are hidden
accordingly.
Note: it is not possible to show or hide specific reviewer comments
using Word Online. The Show Comments button in the Comments
group on the Review tab may be used to show or hide all comments in
Word Online.
4.9 VIEWING AND NAVIGATING COMMENTS
Steps
Manage comments in a document.
If necessary, switch to Print Layout view (select this from the Document Views
group on the View tab).
1. Position the insertion point where you want to Press [Ctrl+Home]
begin reviewing comments.
The insertion point moves to the selected
position.
2. Select the Review tab. Click Review
The Review tab is displayed.
3. Select the Next button in the Comments group. Click Next
The insertion point moves to the next visible
comment.
4. To return to a previous comment, select the Click Previous
Previous button in the Comments group.
The insertion point moves to the previous
comment.
5. To delete the currently selected comment, if Click Delete
desired, select the left-hand part of the Delete
button in the Comments group.
The comment is deleted.
Page 60 UG000032 © 2017
ICDL Advanced Word Processing Lesson 4 - Working with Comments and Revisions
Close COMMENT.docx without saving.
Note: to delete a comment using Word Online click on the button in the bottom
right corner of the comment.
4.10 WORK WITH SPELL CHECK LANGUAGE
Steps
Change the default spell check language.
1. Select the Review tab. Click Review
The Review tab is displayed.
2. Select the Language button in the Language
group.
The language sub menu displays.
Click
3. Click the Set Proofing Language… button. Click
The Language dialog box displays.
4. Select the desired proofing language from the Select a language on the list
Mark selected text as: list of languages.
The language is highlighted on the list.
5. Click the Set as Default button.
A message box displays. Click
6. Click the Yes button Click Yes
The default language is changed.
7. Click the OK button
The Language dialog box closes. Click
Steps
Modify the default spell check language for selected text. Open LANGUAGE.docx.
1. Select all the document text. Triple click in the document
The text appears highlighted. margin
2. Select the Review tab. Click Review
The Review tab is displayed.
© 2017 UG000032 Page 61
Lesson 4 - Working with Comments and Revisions ICDL Advanced Word Processing
3. Select the Language button in the Language
group.
The language sub menu displays.
Click
4. Click the Set Proofing Language… button.
The Language dialog box displays. Click
5. Select the desired proofing language from the Select French
Mark selected text as: list of languages.
The language is highlighted on the list.
6. Click the Yes button Click Yes
The proofing language is changed for the
selected text.
7. Click the OK button
The Language dialog box closes. Click
Note: that the red underlines indicating spelling errors disappear from the text in
LANGUAGE.docx when the correct language has been selected.
Close LANGUAGE.docx without saving.
4.11 USING THESAURUS
Steps
Search the thesaurus. Open a new blank Word document.
1. Select the Review tab. Click Review
The Review tab is displayed.
2. Select the Thesaurus button in the Proofing
group.
The Thesaurus pane opens and displays to the
Click
right of the window.
3. Click in the search bar at the top of the
Thesaurus pane.
The cursor appears in the search bar.
Click
Page 62 UG000032 © 2017
ICDL Advanced Word Processing Lesson 4 - Working with Comments and Revisions
4. Enter the appropriate word into the search bar. Type Licence
The word appears in the search bar.
5. Click on the search icon.
A list of alternative words is displayed below the
search bar.
Click
Steps
Insert alternative words from the thesaurus. Open THESAURUS.docx.
1. Select the word that you wish to find an Select the word creating at start
alternative for. of the second line of the first
The word is selected. paragraph.
2. If necessary, select the Review tab. Click Review
The Review tab is displayed.
3. Select the Thesaurus button in the Proofing
group.
The Thesaurus pane opens and displays a list of
Click
alternative words below the search bar.
4. Move the mouse pointer over the alternative Mouse over producing
word.
The word displays with a blue background and
an arrow to the right of the word.
5. Click the arrow to the right of the alternative
word.
A sub-menu displays.
Click
6. Click the Insert option to replace the selected
word with the selected alternative from the Click
thesaurus.
The word is replaced with the chosen alternative.
Note: to quickly replace a word with an alternative from the thesaurus; right click on
the word, mouse over Synonyms and select the desired replacement from the list.
Close THESAURUS.docx without saving.
© 2017 UG000032 Page 63
Lesson 4 - Working with Comments and Revisions ICDL Advanced Word Processing
4.12 REVIEW EXERCISE
Enter a comment and view existing comments in balloons and the
Reviewing Pane. Enable and use change tracking, then disable it.
Combine multiple documents and review the changes.
1. Open INVITEX.docx from the Student Folder.
2. Enable change tracking.
3. Set the following change tracking options:
Markup options Selection
Insertions Italic
Changed lines Outside Border
Comments (color) By author
Formatting Double underline
4. Change the first line of the document from We are pleased to extend to you
an invitation to You are cordially invited.
5. Disable change tracking.
6. Combine INVITE2U.docx into the current document.
7. Accept the first two changes in the document.
8. Select No Markup from the Display for Review list on the Reviewing
toolbar. Notice that all markup is hidden.
9. Accept all changes in the document.
10. Choose Save As and save the document as INVITEFINAL.docx.
11. Delete INVITEFINAL.docx upon completion.
Page 64 UG000032 © 2017
LESSON 5 -
USING FORMS & PROTECTION
In this section, you will learn how to:
• Create a form
• Set properties for controls
• Protect a form
• Save a form as a template
• Restrict document editing
Lesson 5 - Using Forms & Protection ICDL Advanced Word Processing
5.1 CREATING A FORM
Concepts
A form in Word is used to collect information from people. This is done using various
types of control boxes, that require the user to enter, tick, or select content. A form
may look similar to a table. The form can be printed and completed on paper or it
can be completed from within Word. In Word the form should be protected so that
only relevant areas of the form can be accessed by the user. When you are creating
or working with forms, you need to display the Developer tab on the Ribbon.
Steps
Open CUSTPR1.docx.
Create a form by adding content controls to a template or document.
If necessary, display the formatting marks.
Page 66 UG000032 © 2017
ICDL Advanced Word Processing Lesson 5 - Using Forms & Protection
1. Position the insertion point where you want to Click to the left of the tab character
insert a content control. on the Customer Name line
The insertion point is placed in the desired
location.
2. Select the desired content control in the
Click Rich Text content
Controls group.
control
The Rich Text content control is displayed in
the document.
3. Position the insertion point where you want to Click to the left of Australia
insert a Legacy Tools control.
The insertion point is placed in the desired
location.
4. Select the Legacy Tools button.
The Legacy Tools gallery appears. Click
5. Select the desired control from the Controls Under Legacy Forms, click
group under the Developer tab.
The Check Box Form Field is displayed in the
document.
Practice the concept: Add in message or guide on the control. Double-click on the
checkbox inserted on the document, click Add Help Text button, select if the
message appears on the status bar or Help Key (F1). Enter the text accordingly.
5.2 SETTING PROPERTIES FOR CONTROLS
Steps
Open CUSTPR1.docx, if necessary.
Set properties for content controls. If necessary, display the formatting marks and
the Developer tab.
1. In the Controls group on the Developer tab, Click
select Design Mode.
The Design Mode button is highlighted to
indicate that the mode is enabled. Content
controls in the document change to Design
Mode appearance.
© 2017 UG000032 Page 67
Lesson 5 - Using Forms & Protection ICDL Advanced Word Processing
2. Select the desired content control in the Click on the Rich Text content
document for which you want to edit the control with the text Click or tap
instructional text. here to enter text
The Rich Text content control changes to
edit mode.
3. Edit the instructional text as desired. Edit the text to read Click here and
The instructional text is changed accordingly. enter the company name.
4. In the Controls group on the Developer tab, Click
select Design Mode.
The Design Mode button highlighting is
removed to indicate that the mode is
disabled. Changes to instructional text are
saved. Content controls in the document
change to their normal appearance.
5. Select the desired content control in the Click on the Drop-Down List
document for which you want to edit the content control with the text
properties. Choose an item
The Drop-Down List content control is
highlighted and the Properties button in the
Controls group on the Developer tab is
enabled.
6. In the Controls group on the Developer tab,
Click
select Properties.
The Content Control Properties dialog box
opens.
7. Edit the properties as desired. Follow the instructions shown
The properties are defined accordingly. below the table before continuing
on to the next step
8. Select OK in the Content Control Properties
Click
dialog box.
The Content Control Properties dialog box
closes and the properties are assigned to the
content control accordingly.
Click the Add button and type 1-4 in the Display Name box in the Add Choice
dialog box. Select OK. Notice that 1-4 has been added to the Drop-Down List
Properties list in the Content Control Properties dialog box.
In the same way, add 5-9 and Above 9 to the Drop-Down List Properties list.
Return to the table and continue on to the next step (step 8).
Page 68 UG000032 © 2017
ICDL Advanced Word Processing Lesson 5 - Using Forms & Protection
5.3 PROTECTING A FORM
Concepts
Protecting a form is a useful method of ensuring only the required fields are edited
when it is distributed to other people. Without protecting it the form may be
tampered and completed incorrectly.
Steps
Protect a form.
1. Select the Developer tab from the Ribbon. Click Developer
The Developer tab is displayed
2. Select the Restrict Editing button from the
Protect group.
The Restrict Formatting and Editing task
pane opens. Click
3. Select the desired editing restriction options Check the box next to Allow only
from the Restrict Formatting and Editing this type of editing in the
task pane. document
The Editing restrictions list box is activated
and the Exceptions (optional) list is
displayed.
4. Select the Editing restrictions dropdown
icon. Click Editing restrictions
A list of options is displayed.
5. Select the Filling in forms option. Click Filling in forms
The desired option is selected and the
Exceptions (optional) list closes.
6. Select the Yes, Start Enforcing Protection
button. Click
The Start Enforcing Protection dialog box
opens and an insertion point is placed in the
Enter new password (optional) field.
7. Type a password into the Enter new Type Pr0t3ct70rm
password (optional) field.
An asterisk is entered for each character of
the password.
© 2017 UG000032 Page 69
Lesson 5 - Using Forms & Protection ICDL Advanced Word Processing
8. Select the Reenter password to confirm Press [Tab]
field.
An insertion point is placed in the required
field.
9. Retype the password in the Reenter Type Pr0t3ct70rm
password to confirm field.
An asterisk is entered for each character of
the password.
10. Select OK.
Click
The Start Enforcing Protection dialog box
closes. A message is displayed in the
Restrict Formatting and Editing task pane
informing you that the document is protected
from unintentional editing. A Stop Protection
button appears at the bottom of the task
pane, which will allow you to unprotect the
form.
11. Close the Restrict Formatting and Editing Click
task pane.
The Restrict Formatting and Editing task
pane closes and the document window is
maximised.
5.4 SAVING A FORM AS A TEMPLATE
Steps
Save a form as a template.
1. Select the File tab. Click File
The Backstage view opens.
2. Select Save As, then Browse. Click Save As, then Browse
The Save As dialog box opens with the
text in the File name box selected.
3. Choose a desired location to save the file Click the Student Folder
to.
The folder will appear in a new window.
Page 70 UG000032 © 2017
ICDL Advanced Word Processing Lesson 5 - Using Forms & Protection
4. Type the desired template name. Type Sample Order Form
The text is entered in the File name box.
5. Select the Save as type: dropdown Click Save as type dropdown
button below the file name.
A list of available file types is displayed.
6. Select Word Template. Click Word Template
Word Template is displayed in the Save
as type box.
Notice the default location is in Custom
Office Templates.
7. Select Save. Click Save
The Save As dialog box closes, and the
form is saved as a template.
Close Sample Order Form.dotx.
© 2017 UG000032 Page 71
Lesson 5 - Using Forms & Protection ICDL Advanced Word Processing
Practice the concept: To modify the template, select File, Open, Recent Folders
(or browse to the directory where the template is saved), Custom Office
Templates, select Sample Order Form, click Open. Perform the required
changes, and click Save.
Close CUSTPR1.docx without saving. Delete Sample Order Form.dotx from the
Student Folder.
Steps
Modify a template.
1. Select the File tab. Click File
The Backstage view opens.
2. Select Open. Click Open
The Open window displays.
3. Double click This PC.
The Open dialog box displays. Double click
4. Browse to the Documents folder and Double click the Documents folder,
open the Custom Office Templates then double click the Custom Office
folder. Templates folder
The folder contents display.
5. Select the desired template. Select Sample order Form.dotx
The file Sample order Form.dotx is
selected.
6. Click the Open button.
Click
The selected template file opens.
7. Make the desired changes to the Apply bold formatting to: Company
template. Name:, Gender:, Places of Interest:,
The desired changes are made. No. of Persons:
8. Click Save.
The changes made to the template are Click
saved.
Page 72 UG000032 © 2017
ICDL Advanced Word Processing Lesson 5 - Using Forms & Protection
5.5 MODIFY THE DEFAULT TEMPLATE
Concepts
All new Blank Documents created in Microsoft Word are based on the file
Normal.dotm. This file is also referred to as the default or global template.
Caution is advised when making any changes to Normal.dotm as any changes
made will affect all future new blank documents.
Steps
Modify the default template.
1. Select the File tab. Click File
The Backstage view opens.
2. Select Open. Click Open
The Open window displays.
3. Click Browse.
The Open dialog box displays.
Click
4. Browse to the default template location. Browse to C:\Users\user
The folder contents display. name\AppData\Roaming\Microsoft\
Templates
5. Select the Normal template.
The file Normal.dotm is selected. Select
6. Click the Open button.
Click
The default template file opens.
7. Make the desired changes to the default Change the font size to 12
template.
The changes are made.
8. Click the Save button.
A waring message box displays. Click
© 2017 UG000032 Page 73
Lesson 5 - Using Forms & Protection ICDL Advanced Word Processing
9. Click Save to implement changes usually. Click Don’t Save
However, in this example we will not edit
the default template.
The changes made to the default template
are saved.
Page 74 UG000032 © 2017
ICDL Advanced Word Processing Lesson 5 - Using Forms & Protection
5.6 REVIEW EXERCISE
Create a form and a template
1. Open CUSTORD.docx.
2. Display the paragraph markings in the document and the Developer tab on
the Ribbon.
3. Add the following products to the Drop-Down List control in with these
entries:
Life-Fit Treadmill
Treadmaster Treadmill
Life-Fit Exercise Bike
Exer-Fit Stepper
4. Add a Date Picker content control to the right of the tab on the Delivery Date
line.
5. Add Check Box Form Fields beside the two Shipper: options.
6. Using the Legacy Tools gallery, remove the shading from the Check Box
Form Fields.
7. Protect the document by setting an editing restriction that allows people to fill
in the form only.
8. Enforce protection of the form using a suitable password.
9. Close the CUSTORD.docx without saving changes.
© 2017 UG000032 Page 75
LESSON 6 -
CREATING MASTER DOCUMENTS
In this section, you will learn how to:
• Use a master document
• Insert subdocuments
• Collapse/expand subdocuments
• Unlink subdocuments
• Split and merge subdocuments
• Lock subdocuments
• Open subdocuments
ICDL Advanced Word Processing Lesson 6 - Creating Master Documents
6.1 USING A MASTER DOCUMENT
Concepts
The Master Document feature in Word makes it easier to work with very large
documents by dividing the document into more manageable parts called
subdocuments. Each subdocument is a separate word document stored in a folder
that can be opened and edited separately in Word. The master document contains
a link to each subdocument.
Certain tasks, such as generating a Table of Contents, Index, page numbering or
printing the whole document, may require that all the subdocuments are combined
and displayed in the Master Document. This is done by clicking on the relevant links
in the Master Document to open each subdocument.
In Outline view a Master Document can be created from a new or an existing
document. One or more existing files can be inserted as subdocuments or new
subdocuments can be created by using the Create Subdocument button in the
Master Document.
The Outlining tab provides buttons used to create, insert, and manage the master
document and its subdocuments.
Steps
From the Student Folder, open MASTER.docx.
Use a master document.
If necessary, display the formatting marks.
1. Select the View tab on the Ribbon. Click View
The View tab is displayed.
2. Click the Outline button in the Document View
Click
group.
The document is displayed in Outline view. The
Outlining tab is displayed on the Ribbon.
© 2017 UG000032 Page 77
Lesson 6 - Creating Master Documents ICDL Advanced Word Processing
6.2 INSERTING SUBDOCUMENTS
Concepts
Files inserted into a master document are called subdocuments. Subdocuments
are linked to their source files. Therefore, changes made to a source file are
automatically updated to the master document.
When you insert a subdocument into a master document, the subdocument text
appears in Outline view. You can then use buttons available on the Outlining tab
to collapse and expand the subdocument.
Word inserts a Next Page section break before each subdocument you insert and a
Continuous section break after it.
If the master document and the subdocuments contain duplicate style names with
different formatting, the subdocument text adopts the master document formatting
when inserted into the master document. For example, if the Heading 2 style is
left-aligned in the subdocument but centred in the master document, all
subdocument text formatted with the Heading 2 style will be centered in the master
document.
Steps
Insert subdocuments into a master document.
If necessary, switch to Outline view and display the Outlining tab.
1. Position the insertion point in the document Press [Ctrl+End]
where you want to insert a subdocument.
The insertion point is placed in the desired
location.
2. Select the Show Document button.
The Master Document group of buttons is
displayed.
Click
3. Click the Insert button in the Master
Document group. Click
The Insert Subdocument dialog box opens.
Page 78 UG000032 © 2017
ICDL Advanced Word Processing Lesson 6 - Creating Master Documents
4. Select the drive where the file you want to Click the drive with the Student
insert is stored. Folder
A list of available folders is displayed.
5. Open the folder where the file you want to Double-click the Student Folder
insert is stored.
A list of available folders and files is
displayed.
6. Select the file you want to insert. Click PRODUCT6.docx
The file is selected.
7. Select the Open button.
The Insert Subdocument dialog box closes, Click
and a Word message box may open asking if
you want to rename a style found in both the
subdocument you wish to insert and the
master document.
8. If a Word message box opens, asking if you Click Yes
want to rename a style found in both the
subdocument you wish to insert and the
master document, select Yes.
The Word message box closes. The
subdocument file is inserted into the master
document and the Collapse Subdocuments
button in the Master Document group is
highlighted.
Practice the Concept: Insert BENEFIT6.docx and then TERMS6.docx as
subdocuments at the end of the Master Document.
At the top of the document, select and right-click the No table of contents entries
found. field code. Update the table of contents by selecting Update Field from the
shortcut menu. Display the formatted table of contents in Print Layout view using
the View Shortcuts button on the status bar. Then, switch back to Outline view.
Click the Show Level list in the Outline Tools group on the Outlining tab to display
only level 2 and above. Then, display all the outline levels again.
Save the file to the Student Folder as Master2.docx.
© 2017 UG000032 Page 79
Lesson 6 - Creating Master Documents ICDL Advanced Word Processing
6.3 COLLAPSING/EXPANDING SUBDOCUMENTS
Steps
Collapse and expand subdocuments in a master document.
If necessary, switch to Outline view and display the Outlining tab.
Select the table of contents and press [Alt+F9] to display the {TOC} field code
instead of the table of contents text.
1. Click the Collapse Subdocuments button in
the Master Document group.
The inserted subdocuments are displayed as
hyperlinks with the path and filename of the Click
source file.
2. Click the Expand Subdocuments button in
the Master Document group.
The text for all inserted subdocuments is
displayed. Click
6.4 UNLINKING SUBDOCUMENTS
Steps
Unlink a subdocument. It is important to note that the Show Document setting must
be selected.
Switch to Outline view, if necessary. Then, expand the subdocuments.
1. Select the subdocument you want to unlink. Scroll down and click anywhere in
The subdocument is selected. the subdocument under the Terms
and Conditions of Sale heading
2. Select the Unlink button in the Master
Document group. Click
The link is removed and the text of the
subdocument is copied into the master
document.
Page 80 UG000032 © 2017
ICDL Advanced Word Processing Lesson 6 - Creating Master Documents
6.5 SPLITTING AND MERGING SUBDOCUMENTS
Steps
Split and merge a subdocument.
Switch to Outline view, if necessary, then select the Expand Subdocuments
button to display the text of all subdocuments.
1. Place the insertion point at the point where Click just before the Clothing
you want to split the subdocument. subheading in the first
The insertion point is placed in the desired subdocument
location.
2. Select the Split button in the Master Click
Document group.
The subdocument is split in the master
document. The contents of the original
subdocument are divided between the
original subdocument file and a new file that
contains all the content after the insertion
point.
3. Select the contents of the subdocuments you Drag to select the contents of the
want to merge. split subdocuments (from the
The text in the subdocuments is highlighted Products Distributed heading in
as you drag. the first split document to the end of
paragraph headed Memorabilia,
including any blank paragraphs at
the end)
4. Release the mouse button. Release the mouse button
The text in the subdocuments is selected.
5. Select the Merge button in the Master Click
Document group.
The content is merged in both the master
document and the first subdocument file.
The new file created when the subdocument was split still exists, containing the
content from the start of the split to the end of the original subdocument. However, it
is no longer linked to the master document and can be deleted safely.
© 2017 UG000032 Page 81
Lesson 6 - Creating Master Documents ICDL Advanced Word Processing
6.6 LOCKING SUBDOCUMENTS
Steps
Lock a subdocument.
Switch to Outline view, if necessary. Then, select the Expand Subdocuments
button to display the text of all subdocuments.
1. Select the subdocument you want to lock. Click anywhere in the first
The subdocument is selected. subdocument.
2. Select the Lock Document button in the
Master Document group. Click
The subdocument is locked. A padlock is
displayed against the subdocument in the left
margin of the master document.
The subdocument can now only be opened in Read-Only mode.
6.7 OPENING SUBDOCUMENTS
Steps
Open a subdocument.
Switch to Outline view, if necessary. Then, select the Expand Subdocuments
button to display the text of all subdocuments. All documents should be unlocked.
Open PRODUCT6.docx and view the Products Distributed by Worldwide
Sporting Goods heading. This is the same heading text that is displayed in the
master document. Then, close PRODUCT6.docx.
In MASTER2.docx, type , Inc. at the end of the Products Distributed by
Worldwide Sporting Goods heading at the top of the first subdocument.
Page 82 UG000032 © 2017
ICDL Advanced Word Processing Lesson 6 - Creating Master Documents
1. Double-click the subdocument icon to the left
of the subdocument you want to open. Double-click to the left of
The subdocument opens in its own the first subdocument
application window.
Notice that the text , Inc. has been updated to the source file, PRODUCT6.docx.
Close MASTER2.docx.
© 2017 UG000032 Page 83
Lesson 6 - Creating Master Documents ICDL Advanced Word Processing
6.8 REVIEW EXERCISE
Create a master document
1. Create a new, blank document.
2. Switch to Outline view and insert the following subdocuments: INVITE.docx,
DIRECTN.docx, and LIST.docx.
3. Delete the Next Page section break at the top of the document.
(Hint: Press [Ctrl+Home] to go to the top of the document. Display the
formatting marks and then, select and delete the Next Page section break.
Turn off the formatting marks.)
4. Save the file to the Student Folder as SHOWCASE_L3.docx.
5. Collapse, then expand the subdocuments.
6. In the master document, go to the DIRECTIONS TO THE SHOWCASE
subdocument and change three to four in step 4 and save the Master
Document.
7. Open the DIRECTN.docx subdocument; notice that the text in step 4 has
been updated.
8. Switch back to the SHOWCASE_L3.docx and go to the top of the document.
9. Place the insertion point before the word Join in the first subdocument and
insert a split.
10. Lock the new subdocument and then, use the subdocument icon to open the
document.
11. Close all open documents without saving them. Delete
SHOWCASE_L3.docx from the Student Folder.
Page 84 UG000032 © 2017
LESSON 7 – CREATING CITATIONS AND
BIBLIOGRAPHY
In this section, you will learn how to:
• Insert and edit a citation
• Set and modify citation style
• Create and update a bibliography
Lesson 7 – Creating Citations and Bibliography ICDL Advanced Word Processing
7.1 INSERTING AND EDITING CITATIONS
Concepts
Word enables you to add citations to your documents. Citations are used to identify
the source of the material included in your document. A citation should include
enough information to enable the reader to independently locate the source
information. For example, when citing a book, you should include information such
as the title, author, publisher and year of publication. You can add many types of
citations to your Word documents such as journal articles, websites, electronic
sources, films, patents etc.
Steps
Insert a new citation. Open SOURCES.docx.
1. Click at the point where you want the citation to Click after the first heading on
appear in the document. the second page Roll ‘n’ Relax
The cursor appears at the point where you have 9D Best of Morocco
clicked.
1. Select the References tab. Click References
The References tab is displayed.
2. Click the Insert Citation button in the Citations
& Bibliography group.
A drop-down list appears.
Click
3. Select the Add New Source… button.
The Create Source dialog box launches. Click
4. Click the Type of Source drop-down list and Select Book
select the desired citation type from the list.
The citation type appears in the Type of Source
box.
Page 86 UG000032 © 2017
ICDL Advanced Word Processing Lesson 7 – Creating Citations and Bibliography
5. Enter all the relevant source details into the Enter the source details using
Create Source dialog box. the table below.
The citation details are entered.
6. Double click the Tag name box in the lower left Double click and type FTP3
corner of the dialog box and overtype the default
tag name with a new name.
The Tag name appears in the Tag name box.
7. Click OK.
The Create Source dialog box closes and the Click
citation is saved. The citation appears in
brackets at the insertion point.
Add the details in the table below at step 5.
Author Cora Vervaet
Title Remarkable Morocco
Year 2014
City Paris
Publisher Fairy Tale Press
Note to insert a previously created citation, select the Insert Citation button in the
Citations & Bibliography group on the References tab and select the citation from the
list.
Keep SOURCES.docx open.
Steps
Edit a citation.
1. Select the References tab. Click References
The References tab is displayed.
2. Click the Manage Sources button in the
Citations & Bibliography group. Click
The Source Manager dialog box launches.
3. Select the citation that you want to edit from the Click Remarkable Morocco
Sources available in: list. (2014), Vervaet, Cora
The citation is selected.
© 2017 UG000032 Page 87
Lesson 7 – Creating Citations and Bibliography ICDL Advanced Word Processing
4. Click the Edit button.
The Edit Source dialog box launches. Click
5. Make the necessary changes or additions to the Change the City field to:
citation. London
The changes to the citation are entered.
7. Click OK.
The Edit Source dialog box closes and a Click
message box displays.
7. Click Yes to save the changes to the citation.
The Source manager dialog box displays and Click
any changes made to the citation are saved.
6. Click Close.
The Source Manager dialog box closes. Click
Note to quickly edit a citation, click on the citation mark in your document and select
the down arrow. Select Edit Source to launch the Edit Source dialog box. To delete a
single instance of a citation from your document, select the citation in your document
and press the delete key. Note that the deleted citation will remain in the Source
Manager.
Keep SOURCES.docx open.
7.2 SET AND MODIFY CITATION STYLE
Steps
Change the style of citation(s).
1. Select the References tab. Click References
The References tab is displayed.
2. Click the drop-down arrow beside the Style:
button in the Citations & Bibliography group. Click
The Bibliography Style list opens.
3. Select a citation style from the list. Click Harvard - Anglia
The citation style is changed.
Keep SOURCES.docx open.
Page 88 UG000032 © 2017
ICDL Advanced Word Processing Lesson 7 – Creating Citations and Bibliography
7.3 CREATE AND UPDATE A BIBLIOGRAPHY
Concepts
A bibliography is a complete list of sources used by the author(s) as an aid in the
creation of a document such as a book, report or article. It is as a rule placed at the
end of a document. It should include both sources that have been cited by the
author(s) and relevant sources that have not been referenced in the text. Word
enables you to quickly add a bibliography to your document. The bibliography will
comprise of all the sources on the Current List in the Source Manager dialog box.
Create and update a bibliography.
1. Click where you want the bibliography to appear Click at the end of the document
in the document.
The cursor appears at the point where you have
clicked.
2. If, necessary, select the References tab. If necessary, click References
The References tab is displayed.
3. Click the Bibliography button.
The Bibliography gallery opens. Click
© 2017 UG000032 Page 89
Lesson 7 – Creating Citations and Bibliography ICDL Advanced Word Processing
4. Select the Insert Bibliography button.
A Bibliography is added to your document at Select
the insertion point.
Note you should update your bibliography to reflect any additions or changes
made to your sources using the Source Manager. To update a bibliography, right
click the bibliography and select Update Field. To delete a bibliography, select the
entire bibliography and press the delete key.
Close SOURCES.docx without saving.
Page 90 UG000032 © 2017
LESSON 8 -
CREATING A TABLE OF CONTENTS
In this section, you will learn how to:
• Use a table of contents
• Create a table of contents
• Use custom styles
• Update a table of contents
• Use outline levels
Lesson 8- Creating a Table of Contents ICDL Advanced Word Processing
8.1 USING A TABLE OF CONTENTS
Concepts
A table of contents at the beginning of a large document, such as an instruction
manual, book or report makes it easier to find information by listing the name and
page number of all the topics and subtopics within the document.
For large documents that are used on a computer, a table of contents should also
include hyperlinks for each topic and subtopic that link to their location within the
document, where further information and explanation is available. The hyperlinks
become active when the Ctrl key is held down while clicking the topic / subtopic.
8.2 CREATING A TABLE OF CONTENTS
Steps
Open TOC.docx.
Generate a table of contents.
1. Position the insertion point where you want the Press [Ctrl+Home], if
table of contents to be inserted. necessary
The insertion point is placed in the desired
location.
2. Select the References tab on the Ribbon. Click References
The References tab is displayed.
3. Select the Table of Contents button from the
Table of Contents group.
The Table of Contents gallery opens.
Click
4. Select the required Table of Contents style. Click Automatic Table 1
The Table of Contents based on the selected
style is inserted in document.
Point to the Benefits of Worldwide Telephony Systems heading in the table of
contents and hold [Ctrl]; notice that the mouse pointer changes into a pointing
hand. Click the Benefits of Worldwide Telephony Systems heading; Word goes
to the corresponding document text.
Page 92 UG000032 © 2017
ICDL Advanced Word Processing Lesson 8 - Creating a Table of Contents
It is important to note that it is possible to create a custom table of contents without
the use of a template by clicking the Custom Table of Contents button and editing
the settings appropriately. Steps to modify a table of contents are covered below,
which can be used to generate the custom table of contents.
To delete a table of contents, select the Table of Contents button on the
References tab and click the Remove Table of Contents button from the gallery.
Steps
Change the format of a table of contents and the type of tab leaders.
1. Click anywhere on the Table of Contents to Click on the Table of Contents
select it.
The Table of Contents is selected.
2. Select the References tab on the Ribbon. Click References
The References tab is displayed.
3. Select the Table of Contents button from the
Table of Contents group.
The Table of Contents gallery opens.
Click
4. Select the Custom Table of Contents... button
Click
from the gallery.
The Table of Contents dialog box opens.
5. Click the Formats: drop down arrow under
General to display a list of available formats. Click
A list of Table of Contents format styles is
displayed.
6. Select the specific format that you want to apply Select Distinctive
to the Table of Contents.
The new format is selected and the Print Preview
and Web Preview sections are updated.
7. Click the Tab leader: drop down arrow below
Print Preview to display a list of leader styles. Click
A list of Tab leader styles is displayed.
8. Select the type of tab leader that you want to Click the first option, after
apply to the Table of Contents or select (none) (none)
to remove the tab leader.
The new tab leader is selected and the Print
Preview section is updated.
© 2017 UG000032 Page 93
Lesson 8- Creating a Table of Contents ICDL Advanced Word Processing
9. Click the OK button to apply the changes made
to the Table of Contents. Click
A Replace this table of contents? message
box is displayed.
10. Click the OK button to replace the current Table
of Contents with the new settings. Click
The current Table of Contents is replaced with
the new settings.
Concepts
When you automatically create a Table of Contents in a document Microsoft Word
uses built in styles to define the formatting of each heading style in the table of
contents. These default styles can be customised using the Custom Table of
Contents… button.
Steps
Modify the default heading styles in a table of contents.
1. Click anywhere on the Table of Contents to Click on the Table of Contents
select it.
The Table of Contents is selected.
2. Select the References tab on the Ribbon. Click References
The References tab is displayed.
3. Select the Table of Contents button from the
Table of Contents group.
The Table of Contents gallery opens.
Click
4. Select the Custom Table of Contents... button
Click
from the gallery.
The Table of Contents dialog box opens.
5. If necessary, select From template from the If necessary, select From
Formats: drop down list under General. template
The From template format is selected and the
Modify button becomes active.
6. Click the Modify button.
The Style dialog box opens. Click
7. Select the Table of Contents style that you want Click TOC3
to change from the Styles: list.
The style is selected.
Page 94 UG000032 © 2017
ICDL Advanced Word Processing Lesson 8 - Creating a Table of Contents
8. Click the Modify button.
The Modify Style dialog box opens. Click
9. Make the desired changes to the Table of Click font size 14
Contents style.
The new settings are selected.
10. If necessary, click the Format drop down arrow If necessary, click
to make further changes to the Table of
Contents style.
The new settings are selected.
9. Click the OK button to close the Modify Style
dialog box. Click
The Modify Style dialog box closes and the Style
dialog box is displayed.
9. Click the OK button to close the Style dialog
box. Click
The Style dialog box closes and the Table of
Contents dialog box is displayed.
9. Click the OK button to apply the changes made
to the Table of Contents. Click
A Replace this table of contents? message
box is displayed.
10. Click the OK button to replace the current Table
of Contents and to save the changes made to Click
the heading style.
The current Table of Contents is replaced and
the heading style is updated.
Close TOC.docx without saving.
8.3 USING CUSTOM STYLES
Steps
Open PACK14.docx.
Use custom styles to generate a table of contents.
© 2017 UG000032 Page 95
Lesson 8- Creating a Table of Contents ICDL Advanced Word Processing
Go to page 5 and click in the Product Features heading. Display the Styles task
pane by clicking the launcher arrow in the Styles group on the Home tab. Notice
that the user-defined Features style has been applied to the heading. Close the
Styles task pane and return to the top of the document.
1. Position the insertion point where you want the Click [Ctrl+Home], if necessary
table of contents to be inserted.
The insertion point is placed in the desired
location.
2. Select the References tab. Click References
The References tab is displayed.
3. Select the Table of Contents button in the
Table of Contents group.
The Table of Contents gallery is displayed.
Click
4. Select Insert Table of Contents. Click Custom Table of
The Table of Contents dialog box opens and the Contents…
Table of Contents page is displayed.
5. Select Options.
Click
The Table of Contents Options dialog box opens.
6. Select the Styles option. Click Styles, if necessary to
The Styles option is selected. select it
7. Under TOC level, select the box to the right of Click in the box to the right of
the style you want to include in the table of Features
contents.
The insertion point is placed in the desired TOC
level box.
8. Type the desired table of contents level (from 1 Type 3
to 9) for the corresponding style.
The number is entered in the TOC level box.
9. Select the number in the TOC level box to the Double-click the number 3 in the
right of a style you want to remove from the table Heading 3 box
of contents.
The number is selected accordingly.
10. Press [Delete]. Press [Delete]
The number is deleted and the heading style is
deselected.
11. Select OK.
The Table of Contents Options dialog box closes. Click
Page 96 UG000032 © 2017
ICDL Advanced Word Processing Lesson 8 - Creating a Table of Contents
12. Select OK.
The Table of Contents dialog box closes and the Click
table of contents is inserted.
8.4 UPDATING A TABLE OF CONTENTS
Steps
Update a table of contents.
Position the insertion point in the blank line above the Worldwide Sports... text on
the CUSTOMER INFORMATION page (page 2) and press [Ctrl+Enter] to insert a
page break. Press [Ctrl+Home] to move to the top of the document.
1. Select the References tab on the Ribbon. Click References
The References tab is displayed.
2. Select the Update Table button in the Table of Click
Contents group.
The Update Table of Contents dialog box opens.
3. Select the desired update option. Click Update page
The update option is selected. numbers only, if necessary
4. Select OK.
The Update Table of Contents dialog box closes Click
and the page numbers in the table of contents
are updated.
Notice that the page numbers in the table of contents have changed, beginning with
the PRODUCTS DISTRIBUTED BY WORLDWIDE SPORTS line.
Close PACK14.docx without saving.
8.5 USING OUTLINE LEVELS
Steps
Open OUTTOC.docx.
© 2017 UG000032 Page 97
Lesson 8- Creating a Table of Contents ICDL Advanced Word Processing
Use outline levels to generate a table of contents. Go to page 3.
1. Select the text you want to include in the table of Click in the selection bar to the
contents. left of the Delivery text
The text is selected.
2. Select the View tab on the Ribbon. Click View
The View tab is displayed.
3. Select the Outline button in the Document
Click
Views group.
The document view changes to outline and the
Outlining tab is displayed on the Ribbon.
4. Select the Outline Level list. Click the Outline Level list
The Outline Level list is displayed.
5. Select the desired outline level. Click Level 3
The level is assigned to the text.
6. Assign outline levels to additional text as Follow the instructions shown
desired. below the table before
The outline levels are assigned accordingly. continuing on to the next step
7. Position the insertion point where you want the Press [Ctrl+Home]
table of contents to be inserted.
The insertion point is placed in the desired
location.
8. Select the References tab. Click References
The References tab is displayed.
9. Select the Table of Contents button in the
Table of Contents group.
The Table of Contents gallery opens.
Click
10. Select Insert Table of Contents. Click Custom Table of
The Table of Contents dialog box opens. Contents
11. Under the General section, select the Formats
list. Click Formats
A list of available formats is displayed.
12. Select the desired table of contents format. Click Classic
The selected format is displayed in the Print
Preview and Web Preview boxes.
13. Select the Tab leader list.
A list of available tab leaders is displayed. Click Tab leader
Page 98 UG000032 © 2017
ICDL Advanced Word Processing Lesson 8 - Creating a Table of Contents
14. Select the desired tab leader. Click ....... (second option)
The selected tab leader is displayed in the Tab
leader box.
15. Select Options.
Click
The Table of Contents Options dialog box opens.
16. Select the Outline levels option, if necessary. Click Outline levels, if
The Outline levels option is selected. necessary to select it
17. Select OK.
The Table of Contents Options dialog box Click
closes.
18. Select OK.
The Table of Contents dialog box closes and the Click
table of contents is inserted in the document.
Mark the following additional table of contents entries found on page 3.
Document text Table of contents level
Payment 3
Minimum Order 3
Returns 3
Prices 3
Breakage and Loss 3
Cancellation 3
Use the Shortcut Views buttons on the status bar to return to Print Layout view.
Notice that the table of contents has been applied with the specified entries, levels
and formatting.
Close OUTTOC.docx.
© 2017 UG000032 Page 99
Lesson 8- Creating a Table of Contents ICDL Advanced Word Processing
8.6 REVIEW EXERCISE
Create and update a table of contents
1. Open MANUAL6.docx.
2. Position the insertion point at the start of the document.
3. Create a table of contents using the Distinctive format and 3 levels. Then, generate the
table of contents.
4. Open WORDPROC.docx.
5. Select and copy the entire WORDPROC.docx document.
6. Switch to MANUAL6.docx. Scroll as necessary, position the insertion point on the line
above the Naming New Documents heading and paste the copied text.
7. Update the entire table of contents, not just the page numbers.
8. Close both documents without saving them.
Page 100 UG000032 © 2017
LESSON 9 -
CREATING AN INDEX
In this section, you will learn how to:
• Use an index
• Create main index entries
• Create index subentries
• Type index entries
• Cross-reference index entries
• Generate an index
• Update an index
Lesson 9 - Creating an Index ICDL Advanced Word Processing
9.1 USING AN INDEX
Concepts
An index is an alphabetical listing of subjects included in a document, book, or
report, including the page numbers on which the references can be found.
An index usually appears at the end of the document. Word can create an index
with up to three levels, which means that each index entry can have one level of
subtopics and each subtopic in the second level can have one additional level of
subtopics. In addition, you can create cross-references to other index entries. A
cross-reference refers the reader to a different topic.
9.2 CREATING MAIN INDEX ENTRIES
Steps
Open PACK16.docx.
Create main entries for an index.
If necessary, go to the top of the document.
1. Select the text you want to mark as an index Click in the selection bar to the
entry. left of the Sporting Equipment
The text is selected. text
2. Select the References tab on the Ribbon. Click References
The References tab is displayed.
Page 102 UG000032 © 2017
ICDL Advanced Word Processing Lesson 9 - Creating an Index
3. Select the Mark Entry button in the Index
group.
The Mark Index Entry dialog box opens with the
selected text in the Main entry box.
Click
4. Select Mark or Mark All as desired.
Click
The {XE} field code that marks the index entry is
inserted into the document and the formatting
marks are displayed.
5. Select Close.
Click
The Mark Index Entry dialog box closes.
Practice the Concept: Mark Clothing on page 1 as a main index entry. Leave the
Mark Index Entry dialog box open.
Mark the following index entries by selecting each entry, clicking in the Mark Index
Entry dialog box to activate it, and selecting the appropriate Mark command.
Mark the Supplies and Memorabilia headings on page 1 as main index entries.
Select the word Features (in the Product Features heading) on page 2 and select
the Mark All button to mark all occurrences of the word in the document.
Close the Mark Index Entry dialog box. Hide the formatting marks.
Tip: You can delete a Marked Index Entry by selecting the entire field (including the
field braces) and then pressing the Delete key on the keyboard.
9.3 CREATING INDEX SUBENTRIES
Steps
Create index subentries.
If necessary, go to the top of the document and display the References tab on the
Ribbon.
© 2017 UG000032 Page 103
Lesson 9 - Creating an Index ICDL Advanced Word Processing
1. Select the text you want to mark as the main Drag to select the Products
index entry. Distributed text in the
The text is highlighted as you drag. Products Distributed by
Worldwide Sporting Goods
heading
2. Release the mouse button. Release the mouse button
The text is selected.
3. Select the Mark Entry button in the Index
group.
The Mark Index Entry dialog box opens with the
selected text in the Main entry box.
Click
4. Select the Subentry box. Press [Tab]
The insertion point is placed in the Subentry
box.
5. Type the desired subentry text. Type Equipment
The text is entered in the Subentry box.
6. Select Mark or Mark All as desired.
Click
The {XE} field code for the index entry is inserted
in the document.
7. Create additional subentries as desired. Follow the instructions shown
An {XE} field code is inserted into the document below the table before
for each subentry. continuing on to the next step
8. Select Close.
Click
The Mark Index Entry dialog box closes.
Click to the right of the existing main index entry after each of the following three
headings: Clothing, Supplies, and Memorabilia.
Create index subentries; typing Products Distributed as the main entry for each
and the corresponding heading as the subentry.
Return to the table and continue on to the next step (step 8).
Notice that each subentry appears in a separate {XE} field and includes the main
entry.
Page 104 UG000032 © 2017
ICDL Advanced Word Processing Lesson 9 - Creating an Index
9.4 TYPING INDEX ENTRIES
Steps
Type an index entry.
If necessary, go to the top of the document and display the References tab on the
Ribbon.
1. Position the insertion point where you want to Scroll as necessary and click in
insert an index entry. the blank line above the
The insertion point is placed in the desired Clothing heading
location.
2. Select the Mark Entry button in the Index
group.
The Mark Index Entry dialog box opens with the
insertion point in the Main entry box.
Click
3. Type the desired text. Type Apparel
The text is entered in the Main entry box.
4. Select Mark or Mark All as desired.
Click
The {XE} field code is inserted into the document
at the insertion point and formatting marks are
displayed.
5. Select Close.
Click
The Mark Index Entry dialog box closes.
9.5 CROSS-REFERENCING INDEX ENTRIES
Steps
Cross-reference index entries.
If necessary, go to the top of the document and display the References tab on the
Ribbon.
© 2017 UG000032 Page 105
Lesson 9 - Creating an Index ICDL Advanced Word Processing
1. Select the text you want to cross-reference. Scroll as necessary and drag to
The text is highlighted as you drag. select the limited warranty text
in the second line of the first
paragraph under Sporting
Equipment
2. Release the mouse button. Release the mouse button
The text is selected.
3. Select the Mark Entry button in the Index
group.
The Mark Index Entry dialog box opens with the
selected text in the Main entry box.
Click
4. Select the Cross-reference option. Click Cross-reference
The Cross-reference option is selected and the
insertion point is placed in the Cross-reference
box after the word See.
5. Type the text to which you want to Type Returns
cross-reference the selected text.
The text is entered in the Cross-reference box.
6. Select Mark.
Click
The {XE} field code is placed at the insertion
point in the document.
7. Select Close
Click
The Mark Index Entry dialog box closes.
Practice the Concept: On page 4, select the Returns heading and create a
cross-reference to the limited warranty text; italicise the cross-reference entry.
You can italicise the text in the Mark Index Entry dialog box or, in the document.
Page 106 UG000032 © 2017
ICDL Advanced Word Processing Lesson 9 - Creating an Index
9.6 GENERATING AN INDEX
Steps
Generate an index.
If necessary, display the References tab on the Ribbon.
1. Position the insertion point where you want the Press [Ctrl+End]
index to be placed in the document.
The insertion point is placed in the desired
location.
2. Select the Insert Index button in the Index Click
group.
The Index dialog box opens.
3. Under Type, select the desired type of index. Click Indented, if necessary
The option is selected.
4. Enter the number of columns you want to Click Columns to 2, if
appear in the index in the Columns spin box. necessary
The number of columns is displayed in the
Columns spin box.
© 2017 UG000032 Page 107
Lesson 9 - Creating an Index ICDL Advanced Word Processing
5. Select the Formats list.
A list of available formats is displayed. Click Formats
6. Select the desired format. Scroll as necessary and click
The format is previewed in the Print Preview Formal
box.
7. Select the Right align page numbers option, if Click Right align page
desired. numbers, if necessary
The Right align page numbers option is
selected.
8. Select the Tab leader list.
A list of available tab leaders is displayed. Click Tab leader
9. Select the desired tab leader. Click ....... (second option), if
The tab leader is displayed in the Tab leader necessary
box.
10. Select OK.
The Index dialog box closes and the index is Click
entered at the insertion point.
Hide the formatting marks and switch to Print Layout view to view the index, if
necessary.
9.7 UPDATING AN INDEX
Steps
Update an index.
Position the insertion point before the Service Features heading on page 2 and
press [Ctrl+Enter] to insert a page break. Then, go to the end of the document and
scroll to view all of the index.
1. Position the insertion point in the index. Click anywhere in the index text
The insertion point is placed in the desired
location.
2. Select the Update Index button in the Index
group on the References tab. Click
The index is updated.
Page 108 UG000032 © 2017
ICDL Advanced Word Processing Lesson 9 - Creating an Index
Notice that the page numbers in the index change to reflect the inserted page
break.
Close PACK16.docx without saving.
© 2017 UG000032 Page 109
Lesson 9 - Creating an Index ICDL Advanced Word Processing
9.8 REVIEW EXERCISE
Create index entries, generate and update an index
1. Open INDEX6.docx.
2. Mark the Creating a Document heading as a main index entry.
3. Mark the Naming the Document heading as a subentry of Creating a Document.
4. Go to page 3, mark the Modify Document Defaults text at the top of the page as a main
index entry. Do not include the text Screen.
5. On page 3, mark the Allow Widows and Orphans, Automatic Page Breaks, and
Backup Before Edit Document headings as subentries of the text Modify Document
Defaults. Mark them as main index entries as well.
6. Position the insertion point in the line above the Backup Before Edit Document heading
and enter a main index entry of Saving a File Copy. Cross-reference the Saving a File
Copy entry to Backup Before Edit Document and then, mark the entry.
7. Close the Mark Index Entry dialog box.
8. Press [Ctrl+End] to go to the end of the document.
9. Generate a Modern, two column index at the insertion point. Right align the page
numbers and select a tab leader of your choice.
10. Go to page 1 and select the word filename in the first paragraph below the Naming the
Document heading. Mark all occurrences of filename as a main index entry.
11. Press [Ctrl+End] to go to the end of the document, then update the index.
12. Close the document without saving it.
Page 110 UG000032 © 2017
LESSON 10 -
USING BOOKMARKS, CAPTIONS AND FOOTNOTES
In this section, you will learn how to:
• Work with bookmarks
• Creating bookmarks
• Viewing bookmarks
• Going to a bookmark
• Cross-referencing to a bookmark
• Deleting a bookmark
• Inserting a caption
• Inserting a table of figures
• Inserting a cross-reference
• Inserting footnotes
• Setting note options
• Convert footnotes to endnotes
Lesson 10 - Using Bookmarks, Captions and Footnotes ICDL Advanced Word Processing
10.1 WORKING WITH BOOKMARKS
Concepts
When you are working in a long document, it can be helpful to mark specific
locations in the document so that you can go back to those locations at a later time.
You can use bookmarks to mark a location in a document or to mark selected text,
graphics, tables, and other objects.
Bookmarks can also be used to create cross-references or mark a range of pages
for an index entry.
Bookmark window
10.2 CREATING BOOKMARKS
Steps
Open PACK17.docx.
Create a bookmark.
Go to page 5 of the document.
Page 112 UG000032 © 2017
ICDL Advanced Word Processing Lesson 10 - Using Bookmarks, Captions and Footnotes
1. Select the item to which you want to add a Drag to select the Fitness
bookmark. Equipment heading
The text is highlighted as you drag.
2. Release the mouse button. Release the mouse button
The text is selected.
3. Select the Insert tab on the Ribbon. Click Insert
The Insert tab is displayed.
4. Select the Bookmark button in the Links group.
The Bookmark dialog box opens with the
insertion point in the Bookmark name box. Click
5. Type the desired bookmark name. Type fitness
The text is entered in the Bookmark name box.
6. Select the Add button.
Click
The Bookmark dialog box closes and the
bookmark is saved.
Practice the Concept: Go to page 4, select the Minimum Order text and create a
bookmark named order.
Go to page 3, select the Advertising Agreement text and create a bookmark
named advertising. Click anywhere in the document to deselect the text.
10.3 VIEWING BOOKMARKS
Steps
View bookmarks.
1. Select the File tab Click File
The Backstage view opens
2. Select Options.
The Word Options dialog box opens. Click
3. Select Advanced. Click Advanced
The Advanced options are displayed on the
right-hand side of the dialog box.
© 2017 UG000032 Page 113
Lesson 10 - Using Bookmarks, Captions and Footnotes ICDL Advanced Word Processing
4. Under Show document content, select the Click Show bookmarks
Show bookmarks option.
The Show Bookmarks option is selected.
5. Select OK.
The Word Options dialog box closes and the Click
bookmarks are displayed in the document.
Scroll as necessary to view the bookmarks on pages 3, 4, and 5.
Open the Word Options dialog box again and deselect the Show Bookmarks
option.
10.4 GOING TO A BOOKMARK
Steps
Go to a bookmark.
If necessary, go to the top of the document. Press [Ctrl+Home].
1. Select the Insert tab on the Ribbon. Click Insert
The Insert tab is displayed.
2. Select the Bookmark button in the Links group.
The Bookmark dialog box opens.
Click
3. Select the desired bookmark from the Click order
Bookmark name list box.
The bookmark is displayed in the Bookmark
name box.
4. Select Go To.
Click
The bookmarked text is selected in the
document.
5. Select Close.
Click
The Bookmark dialog box closes.
Page 114 UG000032 © 2017
ICDL Advanced Word Processing Lesson 10 - Using Bookmarks, Captions and Footnotes
Practice the Concept: Open the Bookmark dialog box, go to the fitness
bookmark, and then to the advertising bookmark without closing the Bookmark
dialog box. Then, close the Bookmark dialog box.
10.5 CROSS-REFERENCING TO A BOOKMARK
Steps
Cross-reference to a bookmark.
If necessary, go to the top of the document. Press [Ctrl+Home].
1. Position the insertion point where you want to Click at the end of the third
create a cross-reference. paragraph under the Sporting
The insertion point is placed in the desired Equipment heading
location.
2. Type introductory text for the cross-reference, if Type For specific items, see
desired.
The text is inserted at the insertion point.
3. Select the Insert tab on the Ribbon. Click Insert
The Insert tab is displayed.
4. Select the Cross-reference button in the Links
group.
The Cross-reference dialog box opens.
Click
5. Select the Reference type list.
Click Reference type
A list of available reference types is displayed.
6. Select Bookmark. Click Bookmark
Bookmark is displayed in the Reference type
box and all bookmarks defined in the document
are displayed in the For which bookmark list
box.
7. Select the Insert reference to list.
Click Insert reference to
A list of available options appears.
8. Select the desired option. Click Bookmark text
The option is displayed in the Insert reference
to box.
© 2017 UG000032 Page 115
Lesson 10 - Using Bookmarks, Captions and Footnotes ICDL Advanced Word Processing
9. Select Insert as hyperlink. Click Insert as hyperlink, if
The Insert as hyperlink option is selected. necessary
10. Select the bookmark you want to include in the Click fitness
cross-reference from the For which bookmark
list box.
The bookmark is selected.
11. Select Insert.
The bookmarked text is inserted in the document Click
as a cross-reference.
12. Select Close.
Click
The Cross-reference dialog box closes.
Add spaces and punctuation as necessary to the cross-reference in the document.
Then, press [Ctrl] and click the cross-reference to go to the cross-referenced text.
10.6 DELETING A BOOKMARK
Steps
Delete a bookmark.
1. Select the Insert tab on the Ribbon. Click Insert
The Insert tab is displayed.
2. Select the Bookmark button in the Links group.
The Bookmark dialog box opens.
Click
3. Select the bookmark you want to delete. Click advertising
The bookmark is selected.
4. Select Delete.
Click
The bookmark is deleted from the Bookmark
name list box and removed from the document.
5. Select Close.
Click
The Bookmark dialog box closes.
Close PACK17.docx without saving.
Page 116 UG000032 © 2017
ICDL Advanced Word Processing Lesson 10 - Using Bookmarks, Captions and Footnotes
10.7 INSERTING A CAPTION
Concepts
If you have created a document that contains images as well as text, you may want
to add captions to those images in order to describe or explain them. A caption is
text linked specifically to an image which, is separate from the main text of the
document. They are often used to provide extra information and to help the reader
correctly identify or interpret the image.
You can also caption tables, equations, and other items using the same method.
Steps
Open CAPTION.docx.
Insert a caption.
1. Select the item to which you want to add a Click the first image on the first
caption. page
The image is selected and selection handles
appear around the image. The Format
contextual tab is added to the Ribbon.
2. Select the References tab on the Ribbon. Click References
The References tab is displayed.
3. Select the Insert Caption button in the Select Insert Caption
Captions group.
The Caption dialog box opens. The insertion
point is placed after the default label in the
Caption box. If necessary, select the
Numbering button to change the number
format.
4. Type the desired caption, including any Type : Soccer is growing in
punctuation to appear after the label. popularity. (including the colon
The caption is entered. and the period)
© 2017 UG000032 Page 117
Lesson 10 - Using Bookmarks, Captions and Footnotes ICDL Advanced Word Processing
5. Select OK.
The caption is created and inserted below the Click
image.
Practice the Concept: Scroll down and select the second image on the page.
Then, select the Insert Caption button. Note that Word has automatically assigned
the label Figure 2. Type : Baseball is always a winner., then click OK.
Practice the Concept: Scroll to first page, select the Figure 1 box and press
[Delete]. Select the Figure 2 box and press [F9] at the caption. Notice the updated
caption.
10.8 INSERTING A TABLE OF FIGURES
Concepts
A table of figures can list, tables, images, graphs and equations in a document. To
create a table of figures each table, image, graph or equation requires a caption.
Each caption will have a figure number and item description. When creating a table
of figures there are various formatting options to choose from. In a table of figures
each figure can show a page reference or a link.
Page 118 UG000032 © 2017
ICDL Advanced Word Processing Lesson 10 - Using Bookmarks, Captions and Footnotes
Steps
Insert a Table of Figures.
To create a paragraph in which to insert the Table of Figures, click just before the
Worldwide Goods title, and press [Enter].
1. Position the insertion point where you want to Press [Ctrl+Home], if
insert the Table of Figures. necessary
The insertion point appears in the desired
location.
2. Select the References tab. Click References
The References tab is displayed.
3. Select the Insert Table of Figures button in the Click Insert Table of Figures
Captions group.
The Table of Figures dialog box opens.
4. Select OK.
The Table of Figures is inserted in the document. Click
Press [Ctrl+Home] and enter a paragraph space. Then type the heading Table of
Figures just above the table.
10.9 INSERTING A CROSS-REFERENCE
Concepts
Cross-referencing lets you insert a reference to another item in your document,
such as a specific page, a heading, a subheading, a bookmark, a figure, or a table.
The reference works as a hyperlink, so that a reader viewing the document
electronically can directly go to the referred item. The hyperlink in the reference will
automatically update if the item is moved within the document or the page
numbering changes.
Steps
Insert a cross-reference.
Scroll down to page 2 of the CAPTION.docx document.
© 2017 UG000032 Page 119
Lesson 10 - Using Bookmarks, Captions and Footnotes ICDL Advanced Word Processing
1. Position the insertion point where you want to Click after the text cooperative
insert the cross-reference. advertising agreements in list
The insertion point is placed in the desired item 7
location.
2. Select the References tab on the Ribbon. Click References
The References tab is displayed.
3. Select the Cross-reference button in the
Captions group. Select
The Cross-reference dialog box opens.
4. Select the Reference type list.
The Reference type list is displayed. Click the Reference type
5. Select the desired Reference Type. Click Bookmark
The Insert reference to and For which [type]
boxes are updated based on the selected
Reference Type.
6. Select the specific item you want to refer to in Click Advertising, if necessary
the For which [type] box.
The item is selected.
7. Select the Insert reference to list. Click the Insert reference to
The Insert reference to list is displayed.
8. Select the required text for the reference (e.g. Click Page number
Entire caption, Heading text or Page number,
as appropriate).
The required text is selected.
9. Select Insert.
The cross-reference is inserted in the document Click
as a page number.
10. Select Close.
Click
The Cross-reference dialog box closes.
11. Type appropriate text before and/or after the Type - see page before the
cross-reference. reference link
The cross-reference is presented as desired.
Point to the cross-reference. Press [Ctrl] and click at the same time to follow the
link.
Close CAPTION.docx without saving.
Page 120 UG000032 © 2017
ICDL Advanced Word Processing Lesson 10 - Using Bookmarks, Captions and Footnotes
Note To update a cross reference, right click the cross reference and select
Update Field. To delete a cross reference, double click the cross-reference and
press the delete key.
10.10 INSERTING FOOTNOTES
Concepts
Footnotes are small notes that appear at the end of a page. Each note has a
number or letter that references a piece of text somewhere in the page above it.
After each footnote number there can be a line of text giving further information or
comment about a topic being mentioned in the page above it, or giving a reference
to where further information can be found.
Endnotes are similar to footnotes in that they both consist of two linked parts – the
note reference mark and the corresponding note text – but endnotes appear at the
end of a document rather than at the end of each page.
Sometimes it is better to use endnotes rather than footnotes if it appears that the
document will have too many footnotes at the end of each page therefore taking up
too much space and making it difficult to read.
Footnote and Endnote dialog box
© 2017 UG000032 Page 121
Lesson 10 - Using Bookmarks, Captions and Footnotes ICDL Advanced Word Processing
Steps
Open PACK18.docx.
Insert a note.
Switch to Draft view.
1. Position the insertion point in the text to which Click after warranty, at the end
you want to add a note. of the first paragraph under the
The insertion point is placed in the desired Sporting Equipment heading
location.
2. Select the References tab on the Ribbon. Click References
The References tab is displayed.
3. Select the Footnotes launcher arrow. Click in the Footnotes
The Footnote and Endnote dialog box opens. group
4. Under Location, select the desired type of note. Click Footnotes, if
The Footnotes option is selected. necessary
5. Select the Numbering list under Format.
A list of available options is displayed. Click Numbering
6. Select the desired option if necessary. Click Continuous
The appropriate option is selected.
7. Select Insert.
The Footnote and Endnote dialog box closes. Click
The note reference mark is placed at the
insertion point and the Footnotes pane opens.
8. Enter the desired note text. Type See specific item
The note text is entered in the Footnotes pane. warranty for details.
9. Select the Close button in the Footnotes pane. Click
The Footnotes pane closes.
Practice the Concept: Go to page 3 and click at the end of the Item 2 Initial
advertising budget. Open the Footnote and Endnote dialog box to insert the
following endnote: This agreement will be reviewed annually to determine
whether adjustments are necessary.
Page 122 UG000032 © 2017
ICDL Advanced Word Processing Lesson 10 - Using Bookmarks, Captions and Footnotes
Go to page 6 and click at the end of the Exercise Bikes heading. Open the
Footnote and Endnote dialog box to insert the following footnote: Manufacturer’s
extended warranty is 30 days. Then, close the Footnotes pane.
Preview the document in the Backstage view. Scroll the document to view the
footnotes at the bottom of pages 1 and 6 and the endnote on page 7.
10.11 SETTING NOTE OPTIONS
Steps
Set note options.
1. Select the References tab on the Ribbon. Click References, if necessary
The References tab is displayed.
2. Select the launcher arrow in the Footnotes Click in the Footnotes
group. group
The Footnote and Endnote dialog box opens.
3. Under Location, select the desired type of note. Click Endnotes, if
The Endnotes option is selected. necessary
5. Select the corresponding notes list.
A list of available options is displayed. Click Endnotes
6. Select the desired option. Click End of document
The option is selected.
7. Select the Number format list.
A list of available number formats is displayed. Click Number format
8. Select the desired number format. Click A, B, C,
The number format is selected.
9. Select Apply.
Click
The Footnote and Endnote dialog box closes
and the note options are saved.
Go to page 3 in the document. Notice that the endnote at the end of the Item 2
paragraph uses the letter A as the note reference mark.
© 2017 UG000032 Page 123
Lesson 10 - Using Bookmarks, Captions and Footnotes ICDL Advanced Word Processing
10.12 CONVERT FOOTNOTE TO ENDNOTE
Steps
Go to page 1 and if necessary, switch to Draft view using the View tab.
1. Open the document and select the References Click References
tab.
The References tab is displayed.
2. Click the Footnote and Endnote Dialog Box Click in the Footnotes
launcher. group
The dialog box is displayed.
3. Click the Endnote option. Click Endnotes
The endnotes option is selected.
4. Click the Convert option. Click Convert
The Convert Notes dialog box is displayed.
5. Select the desired option. Click Convert all footnotes to
All the footnotes are converted to endnotes. endnotes
View the changes on the last page of the
documents.
Close PACK18.docx without saving.
Page 124 UG000032 © 2017
ICDL Advanced Word Processing Lesson 10 - Using Bookmarks, Captions and Footnotes
10.13 REVIEW EXERCISE
Inserting Captions and Bookmarks
1. Open CAPTIONEX.docx.
2. Select the first image on the right of page 1.
3. Add a caption and type - Meet world renowned figure skaters in the Caption box.
4. Change the Numbering format to uppercase letters and then, click OK. (Hint: Click
Numbering)
5. Insert the caption.
6. Open INVITEX1.docx.
7. Create bookmarks for the following items:
Item Page Bookmark
Name
Directions to the Showcase 2 directions
Seminars and Demonstrations 2 seminars
EXERCISE BIKES 3 bikes
ROWING MACHINES 3 rowers
STEPPERS 3 steppers
TREADMILLS 4 treadmills
8. Select the Show bookmarks option on the Advanced page in the Word Options
dialog box.
9. Use the directions bookmark to go to the Directions to the Showcase text.
10. Go to the top of the document. Position the insertion point at the end of the second
paragraph and type: See:
11. Create a hyperlinked cross-reference to the seminars bookmark. Close the
Cross-reference dialog box. Add spacing and punctuation as necessary. Press
[Ctrl] and click the cross-reference to jump to the cross-referenced text.
12. Delete the bikes and treadmills bookmarks.
© 2017 UG000032 Page 125
LESSON 11 -
USING MAIL MERGE
In this section, you will learn how to:
• Work with mail merge
• Start mail merge
• Identify the main document
• Create a recipient list
• Customise columns in a recipient list
• Rearrange columns in a recipient list
• Save a recipient list
• Enter records into a recipient list
• Sort records to be merged
• Highlight merge fields
• Insert merge fields into a document
• Preview merged data
• Merge to a new document
• Merge to the printer
ICDL Advanced Word Processing Lesson 11 - Using Mail Merge
11.1 WORKING WITH MAIL MERGE
Concepts
Mail merge is a feature in Word that makes it easy to send the same letter to many
different people with different addresses. This is achieved by creating the letter and
then merging it with a data source that contains a list of individual names and
addresses and possibly other specific data that is needed. The end result is an
individual letter for each name and address on the data source ready to distribute.
Mail Merge options
11.2 STARTING MAIL MERGE
Steps
Open CANCUN1.docx.
Note: The steps in this lesson are specific to merging an existing letter with a new
data source. With the guidance provided by the Mail Merge task pane, however,
you will be able to apply what you learn in this lesson to other circumstances,
whether you are working with a new main document, an existing data source, or any
combination of such files.
1. Select the Mailings tab. Click Mailings
The Mailings tab is displayed.
2. Select the Start Mail Merge button in the Start
Mail Merge group.
The Start Mail Merge menu opens.
Click
© 2017 UG000032 Page 127
Lesson 11 - Using Mail Merge ICDL Advanced Word Processing
3. Select Step by Step Mail Merge Wizard. Click Step by Step Mail Merge
The Mail Merge task pane opens. Wizard
11.3 IDENTIFYING THE MAIN DOCUMENT
Steps
Identify the main document.
1. Under Select document type, select the Click Letters, if necessary
desired document type.
A document type is selected.
2. Under Step 1 of 6, select the Next: Starting Click Next: Starting document
document link.
Step 2 of 6 is displayed in the Mail Merge task
pane.
3. Under Select starting document, select the Click Use the current
desired main document. document, if necessary
The Use the current document option is
selected.
11.4 CREATING A RECIPIENT LIST
Steps
Create a data source or recipient list.
1. Under Step 2 of 6, select the Next: Select Click Next: Select recipients
recipients link.
Step 3 of 6 is displayed in the Mail Merge task
pane.
2. Under Select recipients, select the Type a new Click Type a new list
list option.
Type a new list is selected and the task pane
displays the corresponding options.
Page 128 UG000032 © 2017
ICDL Advanced Word Processing Lesson 11 - Using Mail Merge
3. Under Type a new list, select the Create link Click
button.
The New Address List dialog box opens, with the
insertion point in the Title box.
Leave the New Address List dialog box open.
Note: It is possible to filter a recipient list by clicking Filter and launching the Filter
and Sort dialog box. On the Filter Records tab choose the Field box down arrow
and choose the column to be used as the first-level filter. Select the Comparison
box drop-down arrow and then choose Equal to or another comparison option. In
the Compare to box, enter the data you want the selection in the field box to match.
Click OK when finished to view the results of the filtered records.
11.5 CUSTOMISING COLUMNS IN A RECIPIENT LIST
Steps
Customise the columns in a recipient list.
1. Select the Customize Columns button in the
New Address List dialog box. Click
The Customize Address List dialog box opens
with the first Field Name selected.
2. Select Add.
Click
The Add Field dialog box opens with the
insertion point in the Type a name for your field
box.
3. Type the desired field name in the Type a name Type Region
for your field box.
The field name is displayed in the Type a name
for your field box.
4. Select OK.
The Add Field dialog box closes. The new Field Click
Name is displayed below the first Field Name in
the Field Names list.
5. Select the field you want to remove from the Click Company Name
Field Names list.
The field is selected.
© 2017 UG000032 Page 129
Lesson 11 - Using Mail Merge ICDL Advanced Word Processing
6. Select Delete.
Click
A Microsoft Office Word message box opens
asking you to confirm the deletion.
7. Select Yes.
Click
The Microsoft Office Word message box closes
and the field is deleted from the Field Names
list.
Practice the Concept: Add another field called Qtr Sales. Remove the following
Field Names: Home Phone and Work Phone.
Select the Country or Region field and click Rename. Change the Field Name to
Country then click OK.
Leave the Customize Address List dialog box open.
11.6 REARRANGING COLUMNS IN A RECIPIENT LIST
Steps
Rearrange fields in a recipient list.
1. Select the field you want to move. Click Region
The Field Name is selected.
2. Select Move Up or Move Down as desired.
Click twice (to
The field moves up or down the Field Names list
below the Last Name field)
accordingly.
Practice the Concept: Move the Qtr Sales field below the Country field. Move the
E-mail Address field above the Qtr Sales field.
Leave the Customize Address List dialog box open.
Page 130 UG000032 © 2017
ICDL Advanced Word Processing Lesson 11 - Using Mail Merge
11.7 SAVING A RECIPIENT LIST
Steps
Save a recipient list.
1. Once you have finished customising the
recipient list fields, select OK. Click
The Customize Address List dialog box closes.
The New Address List dialog box displays the
columns arranged according to the
customisation.
2. Select OK.
The New Address List dialog box closes. The Click
Save Address List dialog box opens with the
insertion point in the File name box.
3. Type the desired file name in the File name box. Type sales1
The text is displayed in the File name box.
4. Select Save.
Click
The Save Address List dialog box closes. The
Mail Merge Recipients dialog box is displayed.
Leave the Mail Merge Recipients dialog box open.
11.8 ENTERING RECORDS INTO A RECIPIENT LIST
Steps
Enter records into a recipient list.
1. Double-click the data source file name in the Double-click SALES1.MDB
Data Source list of the Mail Merge Recipients
dialog box.
The Edit Data Source dialog box is displayed
with the insertion point in the first field.
2. Type the desired information into the first field. Type Ms.
The text is displayed in the first field.
© 2017 UG000032 Page 131
Lesson 11 - Using Mail Merge ICDL Advanced Word Processing
3. Press [Tab]. Press [Tab]
The insertion point moves to the next field in the
first record.
4. Enter information as desired into the remaining Follow the instructions shown
fields of the record. below the table before
The information is displayed in the data fields. continuing on to the next step
5. To add another record, select the New Entry
Click
button.
A new, blank data record is displayed.
6. Enter information as desired into additional Follow the second set of
records. instructions shown below the
The information is entered into the new records. table before continuing on to the
next step
7. When you have entered all the desired records,
select OK. Click
A Microsoft Office Word message box opens
asking you to confirm that you want to update
your recipient list and save the changes to the
data source file.
8. Confirm the action as appropriate. Select Yes to
Click
confirm saving the changes to the data source.
The Microsoft Office Word message box and
Edit Data Source dialog box close. The records
are displayed in the Mail Merge Recipients
dialog box.
9. Select OK.
The Mail Merge Recipients dialog box closes. Click
The main document and Mail Merge task pane
are displayed.
Complete the first record with the information shown in the following table, leaving
the Address Line 2 field blank. Since you have created separate city, state, and
ZIP code fields, you do not need to type a comma after the city name.
Field Record 1
Title Ms.
First Name Elaine
Last Name Chua
Region Central
Page 132 UG000032 © 2017
ICDL Advanced Word Processing Lesson 11 - Using Mail Merge
Field Record 1
Address Line 1 Sims Avenue
Address Line 2
City Singapore
State Singapore
ZIP Code 08734
Country Singapore
Qtr Sales 23,445
Return to the table and continue on to the next step (step 5).
Add the following two records to the data source. Do not create a new entry after
adding Record 3.
Field Record 2 Record 3
Title Mr. Ms.
First Name Frank Jackie
Last Name Lim Smith
Region West Coast East Coast
Address Line 1 10 West Coast Road 102 Dove Road
Address Line 2
City Singapore Singapore
State Singapore Singapore
Zip Code 18888 09999
Country Singapore Singapore
Qtr Sales 28,450 32,295
Return to the table and continue on to the next step (step 7).
Notice that the file name of the saved data source now displays under Use an
existing list in the Mail Merge task pane.
© 2017 UG000032 Page 133
Lesson 11 - Using Mail Merge ICDL Advanced Word Processing
11.9 SORTING RECORDS TO BE MERGED
Steps
Sort records to be merged.
1. Select the Edit recipient list link under Use an
Click
existing list in the Mail Merge task pane.
The Mail Merge Recipients dialog box opens.
2. Select the column heading of the field by which Scroll as necessary and click
you want to sort. the State column heading
The records are sorted by the selected field in
ascending order.
3. Select the Sort link. Click
The Filter and Sort dialog box opens with the
Sort Records page displayed.
4. Select the Sort by list.
A list of available fields is displayed. Click Sort by
5. Select the field by which you want to sort. Click Last Name
The field name displays in the Sort by box.
6. Select the desired sort order. Click Ascending, if
The sort order is selected. necessary
Page 134 UG000032 © 2017
ICDL Advanced Word Processing Lesson 11 - Using Mail Merge
7. To sort by additional fields, select one or both Follow the instructions shown
Then by lists, and select the desired fields and below the table before
sort orders. continuing on to the next step
The field names are displayed in the Then by
boxes and the sort orders are selected.
8. Select OK.
The Filter and Sort dialog box closes and the Click
records are sorted accordingly.
Set the following sort options:
Sort Field Order
Then by First Name Ascending
Then by Region Ascending
Return to the table and continue on to the next step (step 8).
Leave the Mail Merge Recipients dialog box open.
Steps
Filter a recipient list.
1. Select the Filter button. Under Refine recipient
list in the Mail Merge Recipients dialog box. Click
The Filter and Sort dialog box opens with the
Filter Records tab displayed.
2. Select the Field: list.
A list of available fields is displayed. Click
3. Select the field by which you want to filter. Click City
The field name displays in the Field: box.
4. Select the Comparison: list.
A list of available comparisons is displayed. Click
5. Select the comparison by which you want to Click Equal to
filter.
The comparison selected displays in the
Comparison: box.
6. Select the Compare to: list.
The cursor appears in the Compare to: box. Click
© 2017 UG000032 Page 135
Lesson 11 - Using Mail Merge ICDL Advanced Word Processing
7. Enter the data that you want the selection in the Type Singapore
Field: box to match.
The typed data appears in the Compare to: box.
8. Select OK.
The Filter and Sort dialog box closes and the Click
records are sorted accordingly.
9. Select OK.
The Mail Merge Recipients dialog box closes. Click
11.10 HIGHLIGHTING MERGE FIELDS
Steps
Set document display options for merging.
1. Select the File tab Click File
The Backstage view opens
2. Select the Options button.
The Word Options dialog box opens. Click
3. Select Advanced. Click Advanced
The Advanced page displays.
4. Scroll down to the Show document content Scroll down to Show document
section. content
The Show document content options are
displayed
5. Deselect the Show field codes instead of Click Show field codes
their values option. instead of their values to deselect
The Show field codes instead of their it, if necessary
values option is deselected.
6. Select the Field shading list.
A list of available options is displayed. Click Field shading
7. Select the Always option. Click Always
The Always option is displayed in the Field
shading box.
8. Select OK.
The Word Options dialog box closes and the Click
document display options are set.
Page 136 UG000032 © 2017
ICDL Advanced Word Processing Lesson 11 - Using Mail Merge
11.11 INSERTING MERGE FIELDS INTO A DOCUMENT
Steps
Insert merge fields into a document.
1. Under Step 3 of 6, select the Next: Write your Click Next: Write your letter
letter link.
Step 4 of 6 is displayed in the Mail Merge task
pane.
2. Position the insertion point in the main Press [Ctrl+Home], if
document where you want to insert a grouped necessary
merge field.
The insertion point moves to the new location.
3. Under Write your letter, select the link for the Click
grouped merge field you want to insert.
The Insert Address Block dialog box opens.
4. Select or deselect the desired options. Click Mr. Josh Randall Jr. in
The options are selected or deselected the Insert recipient’s name in
accordingly and a preview of the first address in this format list
your recipient list is displayed on the right.
5. To preview other addresses from your recipient
list, use the arrows above the Preview box. Click twice
Other addresses are displayed accordingly.
© 2017 UG000032 Page 137
Lesson 11 - Using Mail Merge ICDL Advanced Word Processing
6. Select OK.
The Insert Address Block dialog box closes. The Click
grouped merge field is inserted into the main
document at the insertion point.
7. Position the insertion point where you want to Click after the Region: text
insert an individual merge field.
The insertion point moves to the new location.
8. Under Write your letter, select the More Click
items... link.
The Insert Merge Field dialog box opens.
9. Select the desired field. Click Region
The field is selected.
10. Select Insert.
The merge field is inserted into the main Click
document at the insertion point.
11. Select Close.
Click
The Insert Merge Field dialog box closes.
Practice the Concept: Use the Greeting line... link in the Mail Merge task pane to
insert Mr. Randall, on the second line below Region. (Hint: Set the first list box to
(none).) To preview other Greeting lines from your recipient list, use the arrows
above the Preview box.
Finally, insert the Qtr Sales field after the dollar sign (but before the full stop) in the
fourth line of the letter body. Close the Insert Merge Field dialog box.
11.12 PREVIEWING MERGED DATA
Steps
Preview the merged document.
1. Under Step 4 of 6, select the Next: Preview Click Next: Preview your letters
your letters link.
Step 5 of 6 is displayed in the Mail Merge task
pane. The first merged record is previewed in the
document window.
Page 138 UG000032 © 2017
ICDL Advanced Word Processing Lesson 11 - Using Mail Merge
2. Under Preview your letters, select the Next
Record button to preview each of the merged Click twice
records.
The merged records are previewed accordingly.
3. Under Preview your letters, select the
Previous Record button to navigate back Click twice
through the merged records.
The previous merged records are previewed
accordingly.
11.13 IF-THEN-ELSE RULE
Steps
1. Place the cursor at the end of the paragraph, Click Rules
“For more enquiries, please contact your
programme manager at:”
2. Select the rule from the drop down list. Click IF..Then..Else
The insert word field of IF..Then..Else dialog box
is displayed.
3. Select the field to set the rule on. Select Country from the
The IF..Then..Else dialog box is selected. drop-down list.
4. Type the result for Insert this text. Type 6123 1234
The text appear in the textbox.
5. Type the criteria for Otherwise Insert this text. Type +65 62251221
The text appear in the textbox.
The telephone number displayed will be dependent on the first record in the mail
recipient.
11.14 MERGING TO A NEW DOCUMENT
Steps
Merge to a new document.
© 2017 UG000032 Page 139
Lesson 11 - Using Mail Merge ICDL Advanced Word Processing
1. Under Step 5 of 6, select the Next: Complete Click Next: Complete the
the merge link. merge
Step 6 of 6 is displayed in the Mail Merge task
pane.
2. Under Merge, select the Edit individual letters
Click
link.
The Merge to New Document dialog box opens.
3. Select the records you want to merge to a new Click All, if necessary
document.
The records are selected accordingly.
4. Select OK.
The Merge to New Document dialog box closes. Click
The records are displayed in a new, merged
document.
Scroll through the new document to view the merged letters. Then, close the
document without saving it.
11.15 MERGING TO THE PRINTER
Steps
Merge to the printer.
1. Under Merge, select the Print link. Click
The Merge to Printer dialog box opens.
2. Select the records you want to merge to the Click All, if necessary
printer.
The records are selected accordingly.
3. Select OK.
The Merge to Printer dialog box closes and the Click
Print dialog box opens.
4. Select the desired options in the Print dialog
box, then select OK. Click
The Print dialog box closes, and Word prints the
merged letters.
Close the Mail Merge task pane. Close all open documents without saving them.
Page 140 UG000032 © 2017
ICDL Advanced Word Processing Lesson 11 - Using Mail Merge
11.16 REVIEW EXERCISE
Use mail merge to send a letter to a list of recipients
1. Open INTRVW1.docx and display the formatting marks, if necessary.
2. Deselect the Show field codes instead of their values option and set Field shading
to Always, if necessary. (Hint: Go to Word Options in the File tab, then select the
Advanced page.)
3. Begin the mail merge by opening the Mail Merge task pane.
4. Create a letter to send to a group of people using the current document.
5. Create a new list of recipients. Customise the data source by removing the following
fields: Company Name, Address Line 2, Home Phone, Work Phone, and E-mail
Address, State.
6. Add the following fields to the data source: Appt Date and Appt Time. Move the Appt
Date field below the Last Name field then, move the Appt Time field below the Appt
Date field.
7. Save the data source as prosp1.
8. Add the following data records:
Addressee Appointment Appointment
Date Time
Mr. John Smith October 1 9:30 AM
305 Windsor Drive
Singapore 19107
Singapore
Ms. June Jones October 3 10:00 AM
654 Fifth Avenue
Singapore 19406
Singapore
Mr. George Yeo October 4 9:45 AM
777 King Edwards Road Singapore
19108
Singapore
9. Use the Mail Merge Recipients dialog box to sort the records in ascending order by
Last Name.
© 2017 UG000032 Page 141
Lesson 11 - Using Mail Merge ICDL Advanced Word Processing
10. Insert the Address block grouped merge field on the second line below the date.
Use any recipient name format that includes the title, and format the addresses to
include the destination country or region.
11. Insert the Greeting line grouped merge field on the second line below the Address
block field. Use the Title and Last Name format.
12. Insert the Appt_Date field after the word on then, insert the Appt_Time field after
the word at, in the third line of the first paragraph below the GreetingLine field.
13. Preview the merged letters.
14. Merge all records to a new document. Review the merged document and then, close
it without saving.
15. Close all open documents without saving them.
Page 142 UG000032 © 2017
LESSON 12 -
LINKING/EMBEDDING OBJECTS
In this section, you will learn how to:
• Inserting a Hyperlink
• Display a Linked Object as an Icon
• Embed Data as an Object
• Updating a Link
• Breaking a Link
Lesson 12 - Linking/Embedding Objects ICDL Advanced Word Processing
12.1 CREATE A SIMPLE CHART
Concepts
Charts can be used to visually display numerical data such as trends, results and
statistics. Microsoft Word 2016 allows you to insert several types of charts into
your documents including column, line, pie, bar and area charts. Charts can be an
effective means of communicating information in your documents.
Sales
Alicia Goh Maxie Heron John Carpenter Fred Teo
Steps
Create a chart. Open CHART.docx and click anywhere under the table.
1. Select the Insert tab. Click Insert
The Insert tab appears.
2. Select the Chart button in the Illustrations
group. Click
The Insert Chart dialog box displays.
3. If necessary, select the desired chart category in
the left-hand panel. Click
The available chart styles for the selected
category display in the right-hand panel.
4. If necessary, select the desired chart style in the Select 3-D Pie
right-hand panel.
The chart style is selected.
5. Click OK. Click OK
The selected chart is inserted into the Word
document and the Chart in Microsoft Word
window opens.
Page 144 UG000032 © 2017
ICDL Advanced Word Processing Lesson 12 - Linking/Embedding Objects
6. If necessary, click the Edit Data in Microsoft
Excel button. If necessary, click
The Chart in Microsoft Word window opens
with full Excel functions.
7. Edit the data to be displayed in the chart. Enter the data in the table below
The newly entered data is displayed in the into the Chart in Microsoft
inserted chart. Word window
8. Click the Close button in the top right-hand
corner of the Chart in Microsoft Word window. Click
The Chart in Microsoft Word window closes.
Enter the following data into the Chart in Microsoft Word window.
A B C
1 Sales
2 Alicia Goh 121,500
3 Maxie Heron 630,000
4 John Carpenter 162,000
5 Fred Teo 144,000
12.2 DISPLAY A LINKED OBJECT AS AN ICON
Concepts
Embedded objects are documents or other files you have inserted into a document.
Instead of having separate files, sometimes it's easier to keep them all embedded in
a document.
Steps
Displaying a Linked object as an icon.
1. Select the location in the document where you Select the blank line below the
want to insert the link object. text Catalog.
2. Select the Insert tab. Click Insert
The Insert tab is displayed.
© 2017 UG000032 Page 145
Lesson 12 - Linking/Embedding Objects ICDL Advanced Word Processing
3. Select the Object button in the Text group. Click Object
The Object dialog box is displayed.
4. Select the Create from File tab Click Create from File
The options are displayed.
5. Select the Browse button and navigate to the Click Browse
Student Folder.
The Browse dialog box is displayed.
6. Select the file you want to insert. Scroll as necessary and
The file to be inserted is selected. double-click CATALOG
7. Select the Link to file and Display as icon options. Click Link to file and Display as
The additional options are selected. icon.
8. Select OK.
The dialog box closes and the link to the file is Click
inserted as an Icon.
12.3 EMBED DATA AS AN OBJECT
Steps
Embedding data as an object.
1. Select the location in the document where you Select the blank line below the
want to insert the link object. text that begins with We
specialize in fitness
equipment…
Page 146 UG000032 © 2017
ICDL Advanced Word Processing Lesson 12 - Linking/Embedding Objects
2. Select the Insert tab. Click Insert
The Insert tab is displayed.
3. Select the Object button in the Text group.
Click
The Insert Object dialog box is displayed.
4. Select the Create from File tab Click Create from File
The options are displayed.
5. Select the Browse button and navigate to the Click Browse
Student Folder.
The Browse dialog box is displayed.
6. Select the file you want to insert. Scroll as necessary and
The file to be inserted is selected. double-click SALES.xlsx
7. Select the Link to file check box. Click Link to file
The additional options are selected.
8. Select OK.
The dialog box closes and the document is Click
inserted as a linked object.
To remove the object, select the object and press [Delete].
12.4 UPDATING A LINK
Steps
Update a link.
Switch to the SALES.xlsx. Change the figure in the North QTR1 cell from 25000 to
35000, then save and close the file.
1. Right-click the link object you want to update. Right click on the inserted linked
The link is selected and a shortcut menu opens. object.
2. Select the Update Link option from the shortcut Click Update Link
menu.
The link is updated with the new information.
© 2017 UG000032 Page 147
Lesson 12 - Linking/Embedding Objects ICDL Advanced Word Processing
12.5 BREAKING A LINK
Concepts
If you have inserted a link into a document, you may wish to break it if it is of no
longer of use.
Steps
Breaking a link.
1. Right-click the link object you want to update. Right click on the inserted linked
The link is selected and a shortcut menu opens. object
2. Select the Linked document object option from Click Linked Worksheet Object
the shortcut menu.
The shortcut menu appears.
3. Select Links from the shortcut menu. Click Links
The Links dialog box is displayed.
4. Select the Break Link button, click Yes to Click Break Link and then click
confirm. Yes
The link to the file is removed from the
document.
Page 148 UG000032 © 2017
LESSON 13 -
USING MACROS
In this section, you will learn how to:
• Record a macro
• Run a macro
• Edit a macro
• Add a macro button to a toolbar
• Delete a macro
Lesson 13 - Using Macros ICDL Advanced Word Processing
13.1 RECORDING A MACRO
Concepts
A macro is used to run previously recorded steps that make up a task. To create a
macro, select the macro feature in Word, give the macro a name and then record
the necessary steps needed to carry out a task. When the task is finished, stop
recording and the macro is saved. Select and run the saved macro to automatically
execute the recorded steps of the task.
The advantage of using macros is the consistency, speed and accuracy at which
they run recorded tasks.
Before you create a macro, it is a good idea to make sure to know all the steps
needed to perform the desired procedure so that you can record the macro
accurately.
Steps
Open PHLIST1.docx.
Select all of the text below the Regional Sales Representatives heading.
1. Select the Developer tab on the Ribbon. Click Developer
The Developer tab is displayed.
2. Select the Record Macro button in the Code
group. Click
The Record Macro dialog box opens with the text
in the Macro name box selected.
3. Type the desired macro name. Type SortInfo
The name is displayed in the Macro name box.
4. Select the Store macro in list.
A list of available templates and documents is Click Store macro in
displayed.
5. Select the template in which you want to store Click All Documents
the macro. (Normal.dotm), if necessary
The template name is displayed in the Store
macro in box.
Page 150 UG000032 © 2017
ICDL Advanced Word Processing Lesson 13 - Using Macros
6. Place the insertion point in the Description box. Click in the Description box
The insertion point is placed in the Description
box.
7. Type the desired description for the macro. Type Sorts by region in
The text is entered in the Description box. alphabetical order
8. Select OK.
The Record Macro dialog box closes and the Click
mouse pointer changes to a cassette tape. The
Stop Recording and Pause Recording buttons
are displayed in the Code group on the
Developer tab. A button is displayed on the
status bar to indicate that a macro is currently
recording.
9. Perform the steps of the procedure you want to Follow the instructions shown
automate. below the table before
Each command is recorded by the macro continuing on to the next step
recorder.
10. When you have finished recording the macro, Click Developer
select the Developer tab on the Ribbon.
The Developer tab is displayed.
11. Select the Stop Recording button in the Code
Click
group on the Developer tab.
The macro recorder stops. The Record Macro
button displays again and the macro is recorded.
Perform the following steps to create the macro:
Select the Home tab then, select the Sort button in the Paragraph group.
Select the Header row option, if necessary.
Select the Region option from the Sort by list. Then, select the Text option
from the Type list and the Ascending option, if necessary.
Select OK to close the Sort Text dialog box.
Press the left arrow [ ] to deselect the text.
Return to the table and continue on to the next step (step 10).
Notice that the list is now sorted alphabetically by the Region column. Save the files
as PHLIST2.docm (as a macro enabled document)
© 2017 UG000032 Page 151
Lesson 13 - Using Macros ICDL Advanced Word Processing
Close PHLIST2.DOCM.
13.2 RUNNING A MACRO
Macros dialog box
Steps
Open PHLIST2.docx (regular Word document).
Run a macro. Select all of the text below the Regional Sales Representatives
heading. We will now sort this text by running the macro recorded in the last topic.
1. Select the Developer tab on the Ribbon. Click Developer, if necessary
The Developer tab is displayed.
2. Select the Macros button in the Code group.
The Macros dialog box opens.
Click
3. Select the desired macro from the Macro name Click SortInfo, if necessary
list box.
The macro name is displayed in the Macro
name box.
Page 152 UG000032 © 2017
ICDL Advanced Word Processing Lesson 13 - Using Macros
4. Select the Run button.
Click
The Macros dialog box closes and the macro
runs.
Notice that the list is now sorted alphabetically by the Region column. Close
PHLIST2.docx without saving. Delete PHLIST2.docm upon completion of these
steps.
13.3 ADDING A MACRO BUTTON TO THE QUICK
ACCESS TOOLBAR
Steps
Open LIST2.docm.
Add a macro button to the Quick Access Toolbar.
1. Select the Customize Quick Access Toolbar
button to the right of the Quick Access Click
Toolbar.
The Customize Quick Access Toolbar menu
opens.
2. Select More Commands. Click More Commands
The Word Options dialog box opens with the
Customize page displayed.
3. Select the Choose commands from list. Click Choose commands from
A list of available options is displayed.
4. Select Macros. Click Macros
A list of available macros is displayed in the
Commands list box.
5. Select the desired macro from the Commands Click
list box. Normal.NewMacros.SortInfo
The macro name is selected.
6. Select the Add button.
The macro is added below the current buttons in Click
the Customize list box.
© 2017 UG000032 Page 153
Lesson 13 - Using Macros ICDL Advanced Word Processing
7. Select the Modify button. Click Modify
The Modify Button dialog box opens displaying a
gallery of available button images.
8. Select the desired button image. Click (third row, seventh
The button image is selected. column)
9. If necessary, select the text in the Display name Triple-click the text
box. Normal.NewMacros.SortInfo
The text in the Display name box is selected.
10. Type the desired button name. Type Sort Last Name
The text is displayed in the Display name box.
11. Select OK.
The Modify Button dialog box closes. The Click
selected button image and the revised macro
name are displayed in the Customize list box.
12. Select OK.
The Word Options dialog box closes. The new Click
macro button is displayed in the Quick Access
Toolbar.
Select the entire list including the headings, and use the customised Quick Access
Toolbar button to run the Sort Last Name macro.
Notice that the information is now sorted alphabetically in ascending order by the
second column (Last Name).
Select the Customize Quick Access Toolbar button then, choose More
Commands. Select the Reset button below the Customize list box and then Reset
Only Quick Access Toolbar. Select Yes to Reset the Quick Access Toolbar to
its default settings. Click OK.
Notice that the customised button has been removed from the Quick Access
Toolbar.
13.4 SAVING A MACRO ENABLED DOCUMENT
Steps
Save a file as a Macro Enabled document.
Page 154 UG000032 © 2017
ICDL Advanced Word Processing Lesson 13 - Using Macros
1. Select the File tab Click File
The Backstage view opens
2. Select Save As. Click Save As
A list of options is displayed.
3. Enter a name for the file in the File name box. Type AutoList
The file name is inserted in the File name box.
4. Select the type of file from the Save as type list. Select Word Macro-Enabled
document.
5. Select the Save button. Click Save
The dialog box closes and the file is saved in the
specified format.
Close the file.
13.5 DELETING A MACRO
Steps
Open LIST2.DOCM.
Delete a macro.
1. Select the Developer tab on the Ribbon. Click Developer, if necessary
The Developer tab is displayed.
2. Select the Macros button in the Code group. Click Macros
The Macros dialog box opens.
3. Select the macro you want to delete from the Click SortInfo, if necessary
Macro name list box.
The macro name is displayed in the Macro
name box.
4. Select Delete.
Click
A Microsoft Office Word warning box opens
asking if you want to confirm the deletion.
© 2017 UG000032 Page 155
Lesson 13 - Using Macros ICDL Advanced Word Processing
5. Select Yes.
Click
The Microsoft Office Word warning box closes.
The macro is deleted and removed from the
Macro name list box.
6. Select Close.
Click
The Macros dialog box closes.
Close LIST2.docm without saving.
Page 156 UG000032 © 2017
ICDL Advanced Word Processing Lesson 13 - Using Macros
13.6 REVIEW EXERCISE
Work with macros
1. Open MACRO.docx.
2. Select the entire list, from the Quality Products text through the
Semi-Annual Promotions text.
3. Record a new macro. In the Record Macro dialog box, name the macro bullet
and type the following description: Creates a bulleted list.
4. To record the macro, perform the following steps:
Display the Home tab. Apply the bullet style of your choice.
Open the Define New Multilevel List dialog box and increase the Text indent
to 2.5cm.
5. Complete the macro by clicking the Stop Recording button.
© 2017 UG000032 Page 157
ICDL Syllabus
Ref ICDL Task Item Location Ref ICDL Task Item Location
1.1.1 Apply text wrapping 1.3.3 Create, modify, update a
1.16 Using 1.6 Creating a
options for graphical Advanced paragraph style. Paragraph Style
objects (picture, chart, Layout Options
diagram, drawn object), 1.7 Modify and
tables. Update a
Paragraph Style
1.1.2 Use find and replace
1.17 Using Find
options like: matching 1.4.1 Apply multiple column
& Replace 1.10 Apply
case, whole words, font Options layouts. Change number Multiple Column
formats, paragraph of columns in a column Layout
formats, paragraph layout.
marks, page breaks.
1.4.2 Change column widths
1.11 Changing
1.1.3 Use paste special and spacing. Insert, Column Width
1.18 Using the
options: formatted text, remove lines between and Spacing
Paste Special
unformatted text. Options Button columns.
1.2.1 Apply line spacing within 1.4.3 Insert, delete a column
1.6 Creating a 1.10 Apply
paragraphs: at least, break. Multiple Column
Paragraph Style
exactly/ fixed, Layout
multiple/proportional.
1.5.1 Apply a table
3.1 Apply Table
1.2.2 Apply, remove paragraph autoformat/table style. AutoFormat /
1.19 Using
pagination options. Paragraph Style
Pagination
1.5.2 Merge, split cells in a
Options 3.2 Splitting
table. Split a table. Table / Table
1.2.3 Apply, modify outline Cell
1.2 Applying
numbering in multi-level Multi-Level
lists. 1.5.3 Change cell margins,
Outline 3.3 Changing
alignment, text direction. Cell Margins
Numbering
1.5.4 Automatically repeat
1.3 Modify 3.6 Repeating
Multi-Level heading row(s) at the top Header Rows at
Outline of each page. the Top of Each
Numbering Page
1.3.1 Recognise good practice 1.5.5 Allow, do not allow row(s)
1.1 3.7 Stop Table
in maintaining consistent to break across pages. Row to Break
Implementing
and accessible design Good Design Across Pages
and format throughout a and Formatting
document by using Practice 1.5.6 Sort data by one column,
3.8 Sorting in
styles, alternative text. by multiple columns at Table
the same time.
1.3.2 Create, modify, update a
1.4 Creating a 1.5.7 Convert delimited text to
character style. Character Style 3.12 Converting
a table. Delimited Text
1.5 Modify and to a Table
Update a 1.5.8 Convert a table to text.
Character Style 3.11 Converting
a Table into Text
Page 158 UG000032 © 2017
Ref ICDL Task Item Location Ref ICDL Task Item Location
2.1.1 Add a caption above, 2.3.3 Edit a table of contents,
10.7 Inserting a 8.3 Using
below a graphical object, Caption table of figures like: Custom Styles
table. heading styles, format,
leaders. 8.4 Updating a
2.1.2 Add, delete a caption
10.7 Inserting a Table of
label. Caption Contents
2.1.3 Change caption number
10.7 Inserting a 8.5 Using
format. Caption Outline Levels
2.1.4 Insert, modify footnotes, 2.3.4 Mark an index: main
10.10 Inserting 9.1 Using an
endnotes. Footnotes entry, subentry. Delete a Index
marked index entry.
10.11 Setting 9.2 Creating
Note Options Main Index
2.1.5 Convert a footnote to an Entries
10.12
endnote. Convert an Convert 9.3 Creating
endnote to a footnote. Footbote to Index
Endnote Subentries
2.2.1 Insert, edit a citation like: 2.3.5 Create, update an index
7.1 Inserting 9.6 Generating
book, article, conference and Editing based on marked index an Index
proceedings, website, Citations entries.
report.
9.7 Updating an
2.2.2 Set, modify citation style. Index
7.2 Set and
Modify 2.4.1 Add, delete a bookmark.
10.1 Working
Citation Style
with Bookmarks
2.2.3 Create, update a
7.3 Create and
bibliography. 10.2 Creating
Update a
Bookmarks
Bibliography
2.3.1 Create, update a table of 10.6 Deleting a
8.1 Using a
contents based on Bookmark
Table of
specified heading styles Contents 2.4.2 Create, update, delete a
and formats. 10.5
cross-reference to: Cross-referenci
8.2 Creating a numbered item, heading, ng to a
Table of bookmark, figure, table. Bookmark
Contents
2.4.3 Add a cross-reference to
2.3.2 Create, update a table of 9.5
10.8 Inserting a an index entry.
figures based on Cross-referenci
Table of Figures
specified styles and ng Index Entries
formats. 3.1.1 Insert, delete fields like:
1.13 Inserting
file name and path, file Fields
size, total page number.
1.14 Updating
Fields
© 2017 UG000032 Page 159
Ref ICDL Task Item Location Ref ICDL Task Item Location
3.1.2 Insert a formula field code 3.4.5 Edit, delete embedded
3.9 Adding 12.3 Embed
in a table like: sum, Formula in data. Data as an
average, count. Table Object
3.1.3 Change field number,
3.10 Formatting
date format. Number Field 3.5.1 Modify automatic text
1.8 Automatic
formatting options. Text Formatting
3.1.4 Lock, unlock, update a
1.14 Updating
field. Fields
1.9 Automatic
3.2.1 Create, modify a form Text Entries
5.1 Creating a
using available form field Form
3.5.2 Create, modify, delete
options: text field, check 1.9 Automatic
automatic text correction Text Entries
box, drop-down menu.
entries.
3.2.2 Protect, unprotect a form.
5.3 Protecting a 3.5.3 Create, modify, insert,
1.9 Automatic
Form delete automatic text Text Entries
entries.
3.2.3 Save a document as a
5.4 Saving a
template, modify a Form as a 3.5.4 Record a simple macro
13.1 Recording
template. Template like: change page setup, a Macro
insert a table with a
3.2.4 Modify the default repeating heading row,
5.5 Modify the
template. Default insert fields in document
Template header, footer.
3.3.1 Edit, sort, filter a mail 3.5.5 Run a macro.
11.4 Creating a 13.2 Running a
merge recipient list. Recipient List Macro
3.3.2 Insert ask, 3.5.6 Assign a macro to a
11.13 13.3 Adding a
if…then…else… fields. If-Then-Else custom button. Macro Button to
Rule the Quick
Access Toolbar
3.3.3 Merge a document with a
11.14 Merging
recipient list using given to a New 4.1.1 Turn on, off track
4.1 Enabling
merge criteria. Document changes. Track changes Track Changes
in a document locally,
3.4.1 Create a simple chart in a online using a specified
12.1 Create a
document. Simple Chart display view.
3.4.2 Link data from a 4.1.2 Accept, reject changes in
12.2 Display a 4.6 Accepting /
document, application a document locally, Rejecting All
Linked Object as
and display as an object, an Icon online. Changes
icon.
4.1.3 Insert, edit, delete, show,
3.4.3 Update, break a link. 4.7 Inserting
12.4 Updating a hide comments/notes in a Comments
Link document locally, online.
12.5 Breaking a
4.1.4 Compare and merge
Link 4.4 Comparing
documents. Documents
3.4.4 Embed data into a
12.3 Embed
document as an object. Data as an
Object
Page 160 UG000032 © 2017
Ref ICDL Task Item Location
4.2.1 Add, remove password
1.20 Protecting
protection for a a Word
document: to open, to Document
modify.
4.2.2 Protect a document to
4.6 Accepting /
only allow tracked Rejecting All
changes or comments. Changes
5.1.1 Create, modify, delete
2.1 Working
section breaks in a With Section
document. Breaks
2.2 Creating
Section Breaks
5.1.2 Change page orientation,
2.3 Changing
page vertical alignment, Page
margins for sections of a Orientation
document.
2.4 Changing
Margins for a
Section
5.2.1 Apply different headers
2.5 Apply
and footers to sections, Different
first page, odd and even Headers and
pages in a document. Footers
5.2.2 Add, modify, remove a
1.15 Creating
watermark in a Watermarks
document.
5.3.1 Set, modify default spell
4.10 Work with
check language. Spell Check
Language
5.3.2 Use Thesaurus to search,
4.11 Using
insert alternative word(s). Thesaurus
© 2017 UG000032 Page 161
Congratulations! You have reached the end of the ICDL Advanced Word Processing book.
You have learned about the key advanced skills relating to word processing software,
including:
• Apply advanced text, paragraph, column and table formatting. Maintain a consistent
design through the use of character and paragraph styles.
• Work with referencing features like footnotes, endnotes and captions. Manage
citations and bibliography using a chose citation style. Create tables of contents,
indexes and cross-references.
• Enhance productivity by using fields, forms and templates.
• Apply advanced mail merge techniques and work with automation features like
macros.
• Use linking and embedding features to integrate data.
• Collaborate on and review documents locally or online. Apply document security
features.
• Work with watermarks, sections, and headers and footers in a document. Use
thesaurus and manage spell check settings.
Having reached this stage of your learning, you should now be ready to undertake ICDL
certified testing. For further information on taking this test, please contact your ICDL test
centre.
Light of Life International Christian School
Upper Kauga, Mukono Municipality
Kampala, Mukono-Jinja highway
Uganda
icdlafrica.org
You might also like
- ICDL Word Processing 2013 5.0 - Nu-Vision High SchoolNo ratings yetICDL Word Processing 2013 5.0 - Nu-Vision High School172 pages
- Icdl Workforce Word Processing. Syllabus 6.0. Learning Material (Ms Word 2013) Provided by - E-Tech Complete Solutions LimitedNo ratings yetIcdl Workforce Word Processing. Syllabus 6.0. Learning Material (Ms Word 2013) Provided by - E-Tech Complete Solutions Limited178 pages
- African ICDL Advanced Word Processing 2016 3.0 - Learning MaterialNo ratings yetAfrican ICDL Advanced Word Processing 2016 3.0 - Learning Material173 pages
- ICDL Computer & Online Essentials 1.0 - Neuronet Advanced Training Institute100% (1)ICDL Computer & Online Essentials 1.0 - Neuronet Advanced Training Institute219 pages
- ECDL ICDL Word Processing - Syllabus - V6.0 - Sample Part-Tests - MS2016 - V1 - 0No ratings yetECDL ICDL Word Processing - Syllabus - V6.0 - Sample Part-Tests - MS2016 - V1 - 05 pages
- ICDL Advanced Word Processing 2016 3.0 - QRGNo ratings yetICDL Advanced Word Processing 2016 3.0 - QRG5 pages
- ICDL Databases 2016 6.0 - Kenyatta University100% (1)ICDL Databases 2016 6.0 - Kenyatta University178 pages
- Test 1 - Module 7 - Online CollaborationNo ratings yetTest 1 - Module 7 - Online Collaboration17 pages
- ICDL Advanced Word Processing 2013 2.0 NotesNo ratings yetICDL Advanced Word Processing 2013 2.0 Notes141 pages
- ICDL Computer & Online Essentials Win 10 2016 1.0 SLNo ratings yetICDL Computer & Online Essentials Win 10 2016 1.0 SL219 pages
- ICDL Presentation 365 6.0 - ICDL AfricaNo ratings yetICDL Presentation 365 6.0 - ICDL Africa178 pages
- ICDL Advanced Presentations 2013 2.0 - University of Dar Es Salaam Computing Centre - Mlimani CampusNo ratings yetICDL Advanced Presentations 2013 2.0 - University of Dar Es Salaam Computing Centre - Mlimani Campus138 pages
- Unit 1 Part B Information Technology Class 10thNo ratings yetUnit 1 Part B Information Technology Class 10th27 pages
- ICDL Presentation 2016 6.0 - ICDL AfricaNo ratings yetICDL Presentation 2016 6.0 - ICDL Africa160 pages
- ICDL Advanced Presentation 2016 3.0 - Chum International SchoolNo ratings yetICDL Advanced Presentation 2016 3.0 - Chum International School154 pages
- ICDL 5.0 International Computer Driving License Module 2 File (PDFDrive)No ratings yetICDL 5.0 International Computer Driving License Module 2 File (PDFDrive)71 pages
- ICDL Spreadsheets 365 6.0 - ICDL AfricaNo ratings yetICDL Spreadsheets 365 6.0 - ICDL Africa224 pages
- ICDL Documents 2016 6.0 - Engage ConsultNo ratings yetICDL Documents 2016 6.0 - Engage Consult180 pages
- Presentation 2016 6.0 - Advanced Training InstituteNo ratings yetPresentation 2016 6.0 - Advanced Training Institute160 pages
- ICDL Presentation 2019 6.0 - ICDL AfricaNo ratings yetICDL Presentation 2019 6.0 - ICDL Africa174 pages
- 6496d9d564de3 Icdl Using Databases 2016 6.0. Jodan College of Technology100% (1)6496d9d564de3 Icdl Using Databases 2016 6.0. Jodan College of Technology178 pages
- ICDL Computer Essentials 1.0 Win 10 - GS MUSANZE INo ratings yetICDL Computer Essentials 1.0 Win 10 - GS MUSANZE I98 pages
- Module 2: Using The Computer and Managing Files: ICDL: International Computer Driving LicenseNo ratings yetModule 2: Using The Computer and Managing Files: ICDL: International Computer Driving License41 pages
- ICDL IT Security 2.0 - Institute of Advanced Technology - NairobiNo ratings yetICDL IT Security 2.0 - Institute of Advanced Technology - Nairobi110 pages
- ICDL Computer & Online Essentials 1.0 QRGNo ratings yetICDL Computer & Online Essentials 1.0 QRG6 pages
- WSGR3-Unit45-Using, Editingand FormattingInWord2016No ratings yetWSGR3-Unit45-Using, Editingand FormattingInWord20165 pages
- ICDL Computing 1.0 Teacher Handbook - Sample100% (1)ICDL Computing 1.0 Teacher Handbook - Sample42 pages
- ICDL Spreadsheets 2016 6.0 - Sample PDFNo ratings yetICDL Spreadsheets 2016 6.0 - Sample PDF50 pages
- ICDL Computer Essentials Win 10 Quick ReferenceNo ratings yetICDL Computer Essentials Win 10 Quick Reference4 pages
- ICDL Management Spreadsheets Syllabus 3.0No ratings yetICDL Management Spreadsheets Syllabus 3.06 pages
- ICDL Computer & Online Essentials 1.0 Win10:Chrome:OL2016 Cert Eng - ResultNo ratings yetICDL Computer & Online Essentials 1.0 Win10:Chrome:OL2016 Cert Eng - Result1 page
- SQL Server Management Studio Keyboard Shortcuts PDFNo ratings yetSQL Server Management Studio Keyboard Shortcuts PDF21 pages
