Smart Meter

GoodWe Smart Meter is designed with high precision

USER MANUAL small dimensions, convenient operation and installation.
It is available for both single-phase and three-phase grid
system connection to detect voltage, current, power
and energy, for working with inverters including SEMS
systems for the purpose energy management.

Any fault or damage caused by misoperation or disobeyal

against the rules on manual is beyond GoodWe warrenty
cover range.

PACKING LIST

1* Smart Meter 1* CT (Current Transformer)[1]

1* Screw Driver 4* Cable Connection Terminals
1* USB Seal 1* RJ45-to-Pin Cable[2]

NOTE:
[1] A three-phase Meter will contain 3 CT clamps.
Specifications are subject to the physical product.
[2] Only suitable for RS485 cable connection on RJ45 port of

Kun Lun Shan Road 189, Suzhou, Jiangsu, China 215000 GoodWe hybrid inverters.
[email protected] | www.goodwe.com
01

02 OVERVIEW 2.2 CT OVERVIEW

2.1 SMART METER OVERVIEW

16mm
45mm
2 A(485A+)
1 B(485B-)

4 +(IC+)

8 +(IA+)
6 +(IB+)
3 -(IC-)

5 -(IB-)

7 -(IA-)

66.5mm

2M 32mm 35mm

03 INSTALLATION INSTRUCTION
85mm

3.1 INSTALLATION ENVIRONMENT

①
⑤
② Protection Class: IP20 (for indoor use)
③
Operating Temperature: -20~60℃
④

3.2 INSTALLATION （with DIN track）

① Power LED
② Energy Consumption LED ① Pull to release the retaining clip
③ Communications LED ② Mount the Meter on the
④ Reset Switch track and push the retaining
12 L3(C)
10 L1(A)
11 L2(B)

clip up (a click sound indicates

9N

⑤ USB Port
①
36mm it is installed well)
02 ② 03
3.3 WIRING CONNECTION
3.3.1 WIRING FOR SINGLE-PHASE METER 3.3.2 WIRING FOR THREE-PHASE METER

Grid
Inverter Inverter

RS485 RS485

N L1 N L1 L2 L3 CT×3
CT

LC﹣
LC﹢

LA﹣
LA﹢
LB﹣
LB﹢
Main Meter Main Meter

A
B
Grid

Grid
Load
Load
N N
L
Smart Meter LA Smart Meter
LB
FUSES 0.5A LC
FUSES 0.5A

• Correct direction of CT: House (K)→Grid (L).

• Ensure CT and corresponding supply cable are connected to
the same phase.
• Correct direction of CT: House (K)→Grid (L). Incorrect connection or direction will cause incorrect data and
Incorrect connection or direction will cause incorrect data. may damage the meter.

04 05

04 ELECTRICAL DATA 05 INTERFACE

5.1 INDICATORS
MODEL GM1000 GM3000
* Power LED :
APPLICATION Single-phase Three-phase
Normal operation: ON
Nominal Voltage 230Vac 3L+N/400Vac
* Energy Consumption LED:
Voltage Voltage Range 0.7~1.2Un 0.7~1.2Un Consuming: On
Frequency 50Hz/60Hz Generating: Blinking
Nominal Current CT in:120A/40mA * Communication LED:
Current
Input Transmitting data: Blinking
Current Range 0.48A~120A
Resetting: Blink 5 times
Self-Consumption 3W max

Voltage/Current/Active Power/
5.2 RESET BUTTON
Data Detection
Reactive Power/Power Factor/Frequency
Press Function
Energy Calculation Active/Reactive Power Energy

Voltage/Current Class 1 ＜3s Meter Reset

Precision Active Power Class 1 5s Meter Settings Initialization

Reactive Power Class 2 ＞10s Meter Initialize settings and clear energy data

RS485 (Bund Rate 9600 / ModBus Protocol /

Comm. With Inverter communication cable max. length 100m)
5.3 USB PORT
For after-sales maintenance

06 340-00133-01 07