/ Perfect Welding / Solar Energy / Perfect Charging
TRANSSTEEL
/ 3500 / 4000 PULSE* / 5000 / 5000 PULSE*
FAST PRODUCTION SPEED AND BROAD
RANGE OF APPLICATIONS
*
PULSE
TECHNOLOGY
/2
HIGH-POWER WELDING
AND A BROAD RANGE
OF APPLICATIONS.
WHETHER CONTAINER CONSTRUCTION, BRIDGE
CONTRUCTION OR YELLOW GOODS:
WITH NEARLY 170 OPTIMIZED CHARACTERISTICS,
THE TRANSSTEEL SERIES FEATURES THE
CHARACTERISTICS DEMANDED BY THE HEAVY-
DUTY STEEL CONSTRUCTION SECTOR.
Yet the power source remains versatile: The TransSteel versions with the Pulse function
make child's play of applications involving aluminum and stainless steel. SMEs can
benefit from this variety of materials, as just one device is all they need to cover a wide
range of applications. The underlying philosophy – stay on top of things. The function
spectrum of the TransSteel has therefore been deliberately reduced to the essentials in
all areas according to the motto - as much as necessary, with the best possible overview
and ease of handling.
What´s your
welding challenge?
Let’s get connected.
CUSTOMER BENEFITS /3
40% 40%
Four minutes of continuous welding at maximum output
power, in other words, one minute more of productive out-
DUTY CYCLE ED put compared with the average in this power range.
/ Steel, CrNi, AlMg, AlSi, Metal Cored, Rutil FCW,
167 Basic FCW, Self-shielded
/ 0.8 – 1.6mm wire diameter
CHARACTERISTICS* / Eight different gas mixtures
READY TO WELD / The intuitive operating concept enables welders to start
IN THREE work straight away – no prior knowledge of the device
is required. All the essential welding parameters can be
STEPS 1 2 3 viewed and adjusted on the front panel. The only parame-
ters that have to be selected before welding begins are the
gas, wire diameter and material thickness.
70% LESS / The Pulse function of the TransSteel 4000 and 5000 Pulse
permits faster welding speeds on thicker materials. The
REWORK, 30% FASTER pulsed arc also reduces the amount of rework, as less
WELDING welding spatter is generated.
/ * Maximum number of characteristics (TransSteel 5000 Pulse), will vary depending on the version.
ECONOMICAL AND
GREEN
THINKING SUSTAINABLE
INVERTER EFFICIENCY COOLING
TECHNOLOGY The TransSteel series has an efficiency Fronius Cooling Liquid FCL 10/20.
level of at least 85% across the The composition of the Fronius coolant
The inverter technology lowers the range, which means that most of makes it especially sustainable and in-
power consumption while generating the power taken from the grid is creases the service life of the system. The
the same output power, consequently converted without any loss into coolant is non-flammable, non-irritating
reducing energy costs. energy for the arc. and requires no special labeling.
/4
THE TRANSSTEEL SERIES
TransSteel TransSteel TransSteel TransSteel
FUNCTIONS 3500 4000 PULSE 5000 5000 PULSE
Pulse
SynchroPulse
Data documentation
Mains operation 3-phase 3-phase 3-phase 3-phase
Cooling Water-cooled Water-cooled Water-cooled Water-cooled
Wire speed 4R 4R 4R 4R
Easy Jobs 5 5 5 5
/5
VERSATILE:
FOR A BROAD
RANGE OF
APPLICATIONS!
EASY JOBS
To run repetitive welding tasks
quickly and easily, five sets of
welding parameters can
be saved – these are known as
EasyJobs.
THE REQUIRED WELDING
PARAMETERS CAN THEN
BE ACCESSED AT THE TOUCH
OF A BUTTON.
CONTROL PANEL LOCK
Entering a particular button combination locks the TransSteel
control panel, MAKING UNINTENTIONAL MODIFICATIONS TO THE
WELDING PARAMETERS IMPOSSIBLE. An optional keylock switch is
also available for all the control panels in the TransSteel series
(with the exception of TransSteel 2200 & 2700 C).
/6 THE
MIG/MAG
WELDING
FUNCTIONS
PULSE
WELDING
CONTROLLED AND FAST
The new TransSteel 4000 Pulse and
TransSteel 5000 Pulse mark the arrival
of the pulsed arc in the TransSteel series.
Controlled welding in the intermediate arc
range together with optimum weldability
when working with aluminum are now part
of the basic package.
SPECIAL 4-STEP
MODE
FOR A MORE STABLE ARC
The “Special 4-step mode” is particularly
suitable for welding in the higher power
range. In special 4-step mode, welding
starts at a lower power, which makes the
arc easier to stabilize.
SYNCHROPULSE
SEAM RIPPLING FOR ALUMINUM ALLOYS
The “SynchroPulse” option is recommended for the welding
of aluminum alloys when a rippled seam appearance is
required. This effect is achieved by modifying the welding
power between two operating points.
SYNCHROPULSE works in
STANDARD SYNERGIC AND PULSE SYNERGIC MODE –
but only on the TransSteel 4000 and 5000 Pulse.
/7
CORRECTIONS
DURING
WELDING
/ The ARC LENGTH
CORRECTION
and ARC-FORCE
SPOT AND DYNAMIC welding
STITCH WELDING parameters can be
used to optimize
WITH NO MATERIAL DISTORTION
the welding result.
Spot mode enables you to place welding spots at regular
intervals. As you have complete flexibility over the pause
time between the intervals, spot welding is ideal for the
tacking of workpieces. Stitch welding not only produces
a rippled seam appearance, the low level of heat input
reduces any possible material distortion when working
with light gage sheets.
/ ARC LENGTH CORRECTION
STEEL TO CHANGE THE ARC CHARACTERISTIC
TRANSFER shorter arc, reduced welding voltage
TECHNOLOGY neutral arc
longer arc, increased welding voltage
/ STEEL is the universal characteristic for quick and
easy welding applications.
/ ARC-FORCE DYNAMIC
FOR INFLUENCING THE SHORT-CIRCUITING DYNAMIC
/ STEEL ROOT is the characteristic specifically AT THE INSTANT OF DROPLET TRANSFER
developed for root pass welding. It is characterized
by particularly strong gap-bridging ability, in other hard, stable arc
words, the ability to fill wide gaps. neutral arc
soft, low-spatter arc
/ STEEL DYNAMIC is a characteristic with a
particularly hard and concentrated arc, resulting in / PULSE CORRECTION
high welding speeds and deep penetration. FOR CORRECTING THE PULSE ENERGY OF
PULSED ARCS
lower droplet detachment force
neutral droplet detachment force
higher droplet detachment force
/ PCS (Pulse Controlled Spray Arc) CHARACTERISTICS
facilitate a combination of intermediate and spray arcs
– the result is deep penetration with minimal spattering.
/8
WELDING
DOCUMENTATION
DATA
Welding data documentation is essential, particularly
in steel construction. Load-bearing steel structures, USB
mass-produced products or sensitive parts often have THUMB DRIVE
to be traceable down to the final welding parameters. EXPORT FUNCTION
The Easy Documentation option enables TransSteel to
A USB thumb drive can be connected to the rear of
record welding data extremely easily.
the device (the stick is included as part of the scope
of supply with the Easy Documentation option). The
drive can then be used to export a CSV file containing
welding data.
EASY
DOCUMENTATION
RECORDING OF WELDING PARAMETERS
Easy Documentation records the following welding
parameters:
/ Power source ID
/ Firmware version
/ Serial number
/ Process (Manual, Standard, Pulse, TIG, MMA)
/ Current / voltage / wire speed in the main process phase
/ Power from instantaneous values “IP” (Instantaneous
Power) - energy / time (in the main process phase)
/ Energy from instantaneous values “IE” (Instantaneous
Energy) over the entire welding operation
/ Motor current (in the main process phase)
/ Time stamp hh:mm:ss when current starts to flow
/ Counter
/ Welding duration
/ Error no. when welding is terminated
/ Wire speed (metric and imperial)
/ Characteristic number
/ Operating mode (2T, S2T, 4T, S4T, spot welding, stitch
welding, SynchroPulse)
/ Signature for each weld seam number
/ Template for .csv file
/ Easy Job number
Suchen Sie nach
den Icons in diesem
Folder und erhalten
Sie mit ihrer Magic
Folder App weitere
interessante Inhalte.
WELDING TORCH WITH /9
ADDITIONAL
FUNCTIONS
CONFIGURABLE
MULTILOCK
THE PATENTED INTERFACE
The patented Multilock interface allows you to con-
figure the MIG/MAG welding torch* according to
the task in hand. The wide choice of torch bodies
in terms of their lengths and angles enables even
difficult to access parts to be welded without any
problem. In case of doubt, the best alternative is a
flexible torch body.
/ * Standard and Up/Down welding torches.
15°
MULTILOCK:
30°
MORE THAN
45° 30 VERSIONS
FSC
FRONIUS SYSTEM CONNECTOR
The Fronius System Connector (FSC) is the
central connector for all media and enables
a variety of different welding torches to be
connected.
OPTIONS
/ 10
TU CAR 4
TROLLEY
BASIC, STANDARD & PRO
AND ACCESSORIES
Suitable for all split
devices in the TransSteel
series.
AVAILABLE
IN THREE
VERSIONS
/ 11
COOLING UNIT FK 5000
The cooling unit is filled as standard with FCL10
coolant and is equipped with a coolant filter
(and a flow temperature sensor as an option).
VIZOR 4000 +
TOOL BOX This helmet provides excellent
HANDY protection which auto-darkens
TOOL BOX in as little as 0.05 seconds!
Suitable for all With a default darkness level
split devices in of 2.5, it makes seeing the
the TransSteel workpiece prior to igniting the
series. arc easy.
REMOTE CONTROL
TR 1300
VR 5000 REMOTE
A 4-roller wirefeeder with optional
control unit for pulse or standard
applications that is perfectly
adapted to the system
TECHNICAL DATA
TransSteel 4000 TransSteel 5000/ TransSteel 5000/5000
TransSteel 3500 TransSteel 3500 MV TransSteel 4000 Pulse MV
Pulse 5000 Pulse Pulse MV
Mains voltage 3 x 380 V - 600 V 3 x 200 V 3x 480 V - 600 V 3 x 380 V - 600 V 3 x 200 V 230 V 400 V 600 V 3 x 480 V 3x 600 V 3 x 200 V 230 V 460 V 600 V
Mains fuse protection
35 A 35 A 35 A 35 A 35 A 63 A 35 A
(slow-blow)
Mains tolerance -10 / +15 -10 / +15% -10 / +15% -10 / +15% -10 / +15% -10 / +15%
Max. apparent power 15.67 kVA 13.18 kVA 12.96 kVA 20.42 kVA 16.22 kVA 15.96 kVA 28.36 kVA 23.08 kVA 22.49 kVA
WELDING
CURRENT RANGE
MIG/MAG 10 - 350 A 10 - 350 A 10 - 400 A 10 - 400 A 10 - 500 A 10 - 500 A
WELDING
CURRENT
MIG/MAG
10min/40°C
350 A 350 A 400 A 400 A 500 A 500 A
(104°f) 40% ED
10min/40°C
250 A 250 A 340 A 340 A 360 A 360 A
(104°f) 100% ED
Open circuit voltage 60 V 50 V 65 V 57 V 65 V 57 V
OUTPUT VOLTAGE
RANGE
All information is without guarantee in spite of careful editing - liability excluded. Copyright © 2011 Fronius™. All rights reserved.
MIG/MAG 14.5 - 31.5 V 14.5 - 31.5 V 14.5 - 34 V 14.5 - 34 V 14.3 - 39 V 14.3 - 39 V
Degree of protection IP 23 IP 23 IP 23 IP 23 IP 23 IP 23
747 x 300 x 497 mm / 747 x 300 x 497 mm 747 x 300 x 497 mm / 747 x 300 x 497 mm 747 x 300 x 497 mm 747 x 300 x 497 mm
Dimensions l x w x h
29.4 x 11.8 x 19.6 in 29.4 x 11.8 x 19.6 in 29.4 x 11.8 x 19.6 in 29.4 x 11.8 x 19.6 in 29.4 x 11.8 x 19.6 in 29.4 x 11.8 x 19.6 in
Weight 29 kg (63.5 lb) 37.3 kg (82 lb) 32.5 kg (71.65 lb) 37.3 kg (82 lb) 32.5 kg (71.65 lb) 43.6 kg (96.1 lb)
Text and images correspond to the current state of technology at the time of printing. Subject to modifications.
FOR MORE REGISTER
INFORMATION YOUR
about TransSteel, visit POWER SOURCE
https://www.fronius.com/transsteel to extend your warranty
https://www.fronius.com/pw/product-registration
/ Perfect Welding / Solar Energy / Perfect Charging
THREE BUSINESS UNITS, ONE GOAL: TO SET THE STANDARD THROUGH TECHNOLOGICAL ADVANCEMENT.
What began in 1945 as a one-man operation now sets technological standards in the fields of welding technology, photovoltaics and battery charging. Today, the
company has around 5,440 employees worldwide and 1,264 patents for product development show the innovative spirit within the company. Sustainable
development means for us to implement environmentally relevant and social aspects equally with economic factors. Our goal has remained constant throughout:
to be the innovation leader.
Further information about all Fronius products and our global sales partners and representatives can be found at www.fronius.com
EN v01 Aug 2020
Fronius Canada Ltd.
2875 Argentia Road, Units 4,5 & 6
Mississauga, ON L5N 8G6
Canada
Telephone +1 905 288-2100
Fax +1 905 288-2101
[email protected] www.fronius.ca
