PRODUCT INFO GUIDE
MAGNET BONDING ADHESIVES
Our broad selection of high-performing adhesives offers a solution for every magnet-
bonding purpose. Each product shows remarkable strength and durability.
TB2236
High performance, one component epoxy for metal to metal or ceramic applications
FEATURES:
• High glass transition temperature (142°C)
• Excellent electrical insulating properties
• Good bonding strength, peel strength
• Levels itself upon application
• Cures within 1 hour at 120°C, 30 minutes at 150°C
TB2237J
Heat-curable, one-component, epoxy-compound resin
FEATURES:
• High glass transition temperature (150°C)
• Good elastic modulus in high heat
• Excellent lap shear strength and peel strength
• Good adhesion to various materials
• Cures in 60 minutes at 120°C
TB2273E
One component epoxy resin, for induction bonding
FEATURES:
• Heat cure
• Induction curing
• Minimal shrinkage and outgassing (over 99% nonvolatile matter)
• Excels in electric properties, solidity, and chemical resistance
• Cures in 30 minutes at 150°C
ThreeBond International, Inc. | 513-779-7300 | www.ThreeBond.com
6184 Schumacher Park Dr., West Chester, OH 45069
PRODUCT INFO GUIDE
TB2285
High performance, single package epoxy suitable for both magnet bonding and coating
electric motor coils
FEATURES:
• Very high glass transition temperature (163°C)
• Excellent electrical insulating properties
• High bonding strength
• Good crack resistance
• Self-levels upon application
• Cures in 1 hour at 120°C, and under 30 minutes at 150°C
TB3955
Quick-curing, two-part, room temperature curing elastic adhesive
FEATURES: APPLICATIONS:
• Acrylic-based • Magnet bonding
• Rubber-like elastic body • Around batteries
• Excellent thermal resistance (120°C) • Bonding to fix various electric
• Oil resistance components, sensors, motors
• Moisture resistance • High vibration environments
• No need for special curing equipment, easy to use
• Flexible enough to fold without breaking
• Good elasticity
Griplock MP1-F
A tough, one-part acrylic adhesive used with an activator spray
FEATURES: APPLICATIONS:
• Fast fixturing • Magnet bonding
• Room temperature cure • DC motor assembly
• Chemical, environmental resistance • Bonding pre-coated sheet metal
• Temperature resistance of -40°C to 149°C • Bonding ferrites, plastic, and
• High impact and shock resistance metal wear strips
• High tensile strength • Bonding metals with special
• Good elasticity surface treatments
ThreeBond International, Inc. | 513-779-7300 | www.ThreeBond.com
6184 Schumacher Park Dr., West Chester, OH 45069