D-109

OPERATION MANUAL

FM ST/LW/MW/SW
GLOBAL BAND RADIO
WITH STEREO WIRELESS BT PLAYER

German.French.Spanish.Italian Operation manual

https://xhdata.com.cn/pages/d-109-manual
 Function indication
DPY :Key lock/display switch POWER: Power : switch
SCAN:Radio auto browsing function/MP3
A/B point repeat function. SLEEP: Sleep shutdown time setting
VM:Store radio frequency selection button. ALARM B:ALARM(B) setting/Alarm switch
VF:Manual tuning frequency of tuning knob ALARM A:ALARM(A) setting/Alarm switch
STB:FM stereo switch button / Beep tone switch
Time: Time setting/display time

BW AM bandwidth switching/LCD backlight

permanently on and intelligent control switch BT/ Bluetooth function/wireless phone call
Radio memory station selection/and frequency
SW - :Shortwave meter band switching/Automatic
search of shortwave meter band tuning.Select the previous next song when playing
Bluetooth music.
SW + :Shortwave meter band switching/Automatic
search of shortwave meter band Play the pause selection
TF card play and repeat mode selection
MW/LW:AM/LW band selection/automatic tuning
MUSIC
storage
FM: FM/Automatic tuning storage

FM SET: FM receiving frequency range switching DELETE: Delete radio frequency

9/10K: AM 9K/10K frequency step switching
12/24: 12/24 time system switching MEMORY: Memory radio frequency

FM/SW external
antenna jack
Tuning knob

Volume knob Earphone jack

Type-c: DC IN 5V
 Function indication

System reset
TF card

DISPLAY
Battery level display Radio signal field strength
AM/PM time display
Low power Full power
SW meter wave display
Sleep Scheduled Shutdown Start Alarm A time display icon
Alarm B time display icon
Alarm A start icon Memory station number display icon

Alarm B start icon Temperature display

Small display area

Main display area

Time/frequency/playback time display

Battery charging display

FM STEREO
Radio signals strength scale
Bluetooth function symbol
Radio Signal-to-noise ratio scale value
TF card icon
Mobile phone call prompt symbol
Setting icon of radio station timing startup Single Repetition
Radio search station frequency icon
FM/MW/SW/LW:FM/MW/SW/LW band display icon
AM frequency unit
AM/PM time display FM frequency unit
Disk locking symbol

2.
 Operation introduction

POWER
Please correctly install the positive and negative electrodes of
3.7V(18650)lithium battery into the battery box

External 5VType-c charging socket power supply

POWER ON/OFF
Power on: short press power button,display screen shows "ON"

Power off: short press power button,display screen shows"OFF"

Radio operation
SET THE FREQUENCY COVERAGE
(It needs to be set in the power off state)

Different countries,medium wave,FM frequency coverage is different,please set

according to the situation of different countries

Long press the number key(3),you can switch the time to 24 hours or 12 hours

FM frequency range setting:

After press and hold the number key(1),by short pressing the number key(1),the
screen will say 64,76,87,87.5,Denote frequency coverage
as:64-108MHZ,76-108MHZ,
87-108MHZ,87.5-108MHZ

MW frequency selection step interval:

Setting and temperature display synchronous switching
1. Long press the number key(2)for 3 seconds:
When it shows 9:the medium wave frequency will step to 9KHz. Frequency
coverage range:522-1620KHz.(suitable for Asia, Europe.Africa and Oceania)

In this state, the temperature displays Celsius(℃)

3.
2.When it shows 10 :the medium wave frequency will step to 10KHz.
Frequency coverage range:520-1710KHz(suitable for North and
South America)
South America)
In this state, the temperature displays Fahrenheit(°F)

Long press the(MW/LW)button,and the display(ON)indicates the

open (LW)band. Long press again Display(OFF) off
open (LW)band. Long press again Display(OFF) off
Enter radio mode
(POWER)key to (ON)
Adjust the volume to the appropriate position
Adjust the volume to the appropriate position
Select band
Short press(FM)key,or(MW/LW or SW -/SW +),
Switch short wave meter band:Repeated short press(SW -/SW +)
When receiving FM and SW,you can choose to use pull rod antenna
or external antenna.(Plug the external antenna into the ANT socket)

Turn the fuselage angle when MW and LW are used to obtain the
best receiving sensitivity
Search station frequency
Tune the radio frequency
1. Manually tune the radio frequency(VF)
Short press(VF) key
Turn the tuning knob slowly and quickly(TUNING)
3. Scanning frequency(VF)
Long press (SCAN) button to enter browsing.When the station
is scanned, it will stop for 5 seconds.Short click (SCAN) to stop
searching
2. Input the radio frequency with the number keys(VF)
The preferred current band radio frequency is entered directly with
the numeric key
4.
 Search for memory stations

1. Manual memory station(VF)

Select the preferred band
Select radio frequency to memory
Short press (MEMORY) key, radio station code flashes in the
upper right corner
Press the (MEMORY) key again to remember

2. Fully automatic scanning memory

Select band
Long press the corresponding band key to automatically scan
and memorize the radio frequency

Two modes of shortwave automatic search

Long press the (SW -) key for 3 seconds for the full meter band
search memory mode
Long press the (SW +) key for 3 seconds as the current meter
Band search memory mode

— Tips —
The radio signal will be affected by such factors as season/time period/weather,
receiving environment,electromagnetic interference and receiving antenna angle and
azimuth. Therefore, ATS memory should be updated frequently

Access memory radio station(VM)

1. After the station search is completed, you can enter the memory
Radio mode or press the (VM) key briefly

2. Turn the (TUNING) button to switch the memory radio frequency

3. Input the frequency number of the memory station directly with

the number keys
5.
 Auto scan memory radio frequency(VM)
1.Select band, short press(VM) key, press and hold the(SCAN) key
for 3 seconds to enter the automatic browse mode

2.Scan each memory radio station number for 5seconds,and short

press the SCAN key briefly to select listening. No action, continue
to scan the address number of the next radio station

Delete memory station method

Select Delete Memory Station
1. Short press the (VM) key to enter the state of retrieving memory
station
2.Select band
3.Turn the (TUNING) button to select the radio station number
frequency to be deleted
4.Long press(DELETE) key for 3 seconds to display [DEL], and
short press again to confirm deletion
Delete all memory stations of the current band
1. Short press the (VM) key to enter the state of retrieving memory
station
2. Select band
3. Press and hold the (DELETE) key until the sub display area
display (ALL), release it and press it briefly again to confirm
the deletion of all
Delete all memory radio frequencies
1. Turn off a machine
2. Press and hold the (DELETE) key for 3 seconds until [DEL] and
[ALL] flash, and then press and hold the (BT) key for 3 seconds
to confirm the deletion

6.
 Switch AM bandwidth
Continuous short press (BW/ ) can switch AM bandwidth
circularly
FM stereo switch
1. FM is mono radio mode when horn is used for radio reception
2. In the headset receiving FM state, short press the (ST/B) key,
stereo symbol( )display. Click the stereo symbol ( )
again to show cancel, stereo off
Stereo Headphone Output
This machine is equipped with FM and Bluetooth/MP3 stereo
headset output .Use the 3.5 headphone jack.
FM/SW external input jack
The machine is equipped with FM/SW external antenna 3.5
headphone socket to improve the indoor reception sensitivity
of FM/SW radio

— Tips —
Stereo will not be turned on when the radio station uses mono
radio or the reception signal is weak

Bluetooth/MP3 playback function

TF Card MP3 player
1.Insert TF card with music file
2.Press the(MUSIC) key briefly to enter the
TF card MP3 playing state
3. Short press these two keys to select the
previous song and the next song [TUNING] can
also select songs. Long press for fast rewind and fast forward
functions
4. Play/pause function button

7.
5. Long press and hold this key icon to display, which
is a single song cycle playback mode.Press and hold the
icon ( )again to turn off, which is a cycle playback mode
for all song areas

6.A/B point repeat function:

When MP3 player is playing, press key(SCAN) briefly to display(A)
Press key(B) again to play again at point A/B

Bluetooth function operation

Music playing
1.Short press( )key to enter Bluetooth playing status
2.Open the Bluetooth connection interface of the mobile
phone, search the Bluetooth connection name ( D-109 )
and connect, and the successful connection is displayed
( )
3.Short press( ) or ( ) key and turn the [TUNING] button
to select a song or directly select songs on your mobile phone

Wireless call
When there is a phone call in Bluetooth connection status,
briefly press ( ) to answer the call, and then briefly
press once to end the call
Bluetooth forced disconnection
1.When Bluetooth is connected, long press button( )
for 2 seconds to disconnect the current device.
2.Long press again to reconnect the device

Display content switching

When using the radio function: Short press the( )key
repeatedly and briefly, the display area on the upper right corner
can be switched to [signal strength/signal-to-noise ratio] value,
can beboot
(timed switched to [signal
time)alarm strength/signal-to-noise
A and ratio]
alarm B,(local time)and value,(timed boot
memory
radio frequency number

8.
 Display backlight switch
Automatic backlight on
Press any button in any state to light up for 5 seconds and
then turn off
Long bright mode
Press and hold the(BW/ )key for a long time to keep the
backlight on, and then press and hold again to turn it off

Sleep timed shutdown mode

Press the (POWER) key to (ON)
Short press the(SLEEP)key briefly, the ( ) icon flashes,
press the (SLEEP) key continuously or turn the (TUNING) key
to select the boot time [01-120] minutes, and then flash for 3
seconds for automatic confirmation

Cancel (SLEEP) shutdown function

Select to turn ( ON ) the machine function again, and then
turn off the sleep shutdown setting

Set clock
1.Under the shutdown state, long press the number(3)key to
set the 12/24 time system
2.The time can be adjusted in the on/off state
3.Long press the (TIME) key, and the clock will flash
4.Input (hour) and (minute) with the number keys or adjust
them respectively with the [TUNING] button

Alarm and timed power on function

Switch (ALARM)
Short press the (ALARM A) or (ALARM B) key, and the icon
( )( ) respectively displays the alarm enabled
Short press (ALARM A) or (ALARM B), and the alarm will be
turning off if the( )or( ) icon is not displayed

9.
 Set the alarm to start on time
1.Press (ALARM A) or (ALARM B) key for a long time, and the
time in the sub display area at the upper right corner flashes
2.Directly input the number to set the hour and minute, or rotate
the[TUNING]key to adjust the time, and then press(ALARM A)
or (ALARM B) briefly to confirm.

3.At this time, the main display area will adjust the alarm duration
to flash, and turn the[TUNING] key to select within(0~60)minutes

4.Short press (ALARM A) or (ALARM B) again to confirm

that the ALARM is on ,( ) or ( ) icon is displayed,
and the setting is completed

Set the way to open the machine regularly

1.Radio station alarm mode
Power on, select the band and the radio frequency to be used
as the alarm, and adjust the appropriate volume

Short press the (MEMORY) key, the frequency number flashes,

and then short press the (ALARM A) or (ALARM) key
immediately

The icon( ) or ( ) and radio icon( ) flash together

for 2 seconds for automatic confirmation

2.Play music alarm

Insert a music TF card and power on. Short press the(MUSIC)
key to enter TF card play and adjust the appropriate volume

Short press the (MEMORY) key, and the song number in the
upper right corner flashes

Press the (ALARM A) or (ALARM B) key for a short time,

then the icon( ) or ( ) will flash for 2 seconds at the
same time with [ ], and then stop flashing. Confirm
that the setting is complete

10.
3.(beep) Wake up with an alarm
Power on, press (BT) key briefly to switch to Bluetooth
mode
Making the Bluetooth off
When Bluetooth is disconnected , briefly press the
(MEMOR) key , the ( ) icon will flash , then briefly
press (ALARM A) or (ALARM B) once, and the icon
( ) or ( ) will flash for 3 seconds , then stop flashing
for confirmation , and the setting is completed
Operation after turning on the alarm clock
After using the alarm clock to start the machine, it needs to
be turned off

Short press (POWER) or (SLEEP) key twice in succession

to shut down the machine
To cancel the radio alarm lock frequency and music alarm
lock, press the (POWER) and (SLEEP) keys briefly

Keyboard lock
Long press( ) to lock keyboard and (TUNING)
button, icon( ) display. Long press again unlock the
keyboard and (TUNING) button.

System reset
In rare cases such as accidental interference, the
system will press the keyboard, select button failure
display disorder and other phenomena. Press the
RESET key with a thin hard object to reset the system

Charging operation
When the power display( ) of the machine is low or
the power is exhausted( ), please charge it immediately

11.
 Connect one end of the USB charging cable to the DC5V
USB output adapter, and plug the other end into the local
(TYPE-C) jack [ the adapter output is DC5V( 1A) to charge
the machine. The display shows ( )charging symbol
flashes

When the icon ( ) is displayed, the charging symbol

( ) does not flash, indicating that it is fully charged

- Tips -

In order to avoid interference and insufficient charging current

during charging, which may cause automatic shutdown and
longer charging time, please do not use the machine for radio
and playback

Safe use of lithium battery

1.The machine is powered by (18650 3.7V) rechargeable lithium
battery. Only batteries of the same specification and equivalent
shall be used . Improper use of lithium battery may cause
explosion!

2.Do not charge the non rechargeable battery

3.The battery shall not be placed in the hot and humid
environment such as water, humidity, explosion and
baking
4.Do not disassemble, impact or knock the lithium battery. If the
lithium battery is deformed or bulged, it can not be used

5.Please use a safe and qualified adapter for charging

6.In order to maintain the service life of the lithium battery, if the
machine is not used for a long time, please place it for less
charging every three months

12.
 SPECIFICATION
Radio frequency range
FM: 64-108 MHz/76-108MHz
87-108 MHz/87.5-108MHz
LW: 153-513KHz(9K)
MW: 522-1620KHz(9K)/520-1710 KHz(10k)
SW: 1711-29999KHz(5K)

Radio noise limiting sensitivity

FM:(S/N=30dB): 2μV
LW:(S/N=26dB): 10mV/m
MW:(S/N=26dB): 1mV/m
SW:(S/N=26dB): 18μV

Radio Selectivity
FM: 60dB
LW: 60dB
MW: 60dB
SW: 60dB

Memory radio frequency

FM: 100 pcs
LW: 100 pcs
MW: 100 pcs
SW: 100 pcs

Maximum output power: 2.0W

13.
7
Headphone impedance: 16-32 Ω

Speaker specification:
40mm (dual NdFeB 16 core) 4Ω/5W

TF card :support : 32G (Not include)

Audio playback format:

MP3 / WMA / WAV /FLAC

Bluetooth transmission distance: 10M

DC: 3.7V (18650) 2000mAh

DC5V IN:DC5V / 1000mA

14.