Scribd
Upload
34 views3 pages

Transformer Data Sheet Guide

This document is a data sheet for offshore power and distribution transformers. It provides specifications for electrical data, performance data, mechanical data, and accessories. The data sheet includes information on the manufacturer, ratings, voltages, cooling type, enclosure protection, losses, efficiencies, weights, dimensions, cable entries and terminations to be filled in by the vendor. Completed data sheets will become the guaranteed technical particulars for the transformers.

Uploaded by

Dinesh Raj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
34 views3 pages

Transformer Data Sheet Guide

This document is a data sheet for offshore power and distribution transformers. It provides specifications for electrical data, performance data, mechanical data, and accessories. The data sheet includes information on the manufacturer, ratings, voltages, cooling type, enclosure protection, losses, efficiencies, weights, dimensions, cable entries and terminations to be filled in by the vendor. Completed data sheets will become the guaranteed technical particulars for the transformers.

Uploaded by

Dinesh Raj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

DS 4042-

DATA SHEET FOR No.


OFFSHORE MHN
POWER AND
DESIGN DISTRIBUTION Rev. No. 0
SECTION TRANSFORMER
Discipline Elect
Page: 1 of 3

1.0 GENERAL
1.1 MANUFACTURER
1.2 NO.OF TRANSFORMERS/TAG NOS.
1.3 DUTY CONTINUOUS
1.4 TYPE OF COOLING
1.5 INSTALLATION INDOOR/OUTDOOR
1.6 ENVIRONMENT REFER ELECTRICAL DESIGN
1.7 AMBIENT TEMPERATURE CRITERIA & FS2005
1.8 ALTITUDE
1.9 TRANSFORMER ENCLOSURE DEGREE IP 23 / IP 45 FOR INDOOR /
OF PROTECTION OUTDOOR (MINIMUM)
1.10 REFERENCE CODE
1.11 SYSTEM NEUTRAL EARTHING SOLIDLY EARTHED

2.0 ELECTRICAL DATA


2.1 VOLTAGE RATIO
2.2 FREQUENCY 50 ± 3% Hz
2.3 PHASE 3
2.4 RATED POWER
2.5 PRIMARY FAULT LEVEL
2.6 VECTOR GROUP Dyn 11
2.7 PERCENTAGE IMPEDENCE
2.8 INSULATION CLASS - HT/LT
2.9 TEMPERATURE RISE - HT/LT
2.10 NEUTRAL CT RATING/ACCURACY
CLASS
2.11 DIFF. CT RATING/RATIO/KNEE POINT
VOLTAGE/SECONDARY RESISTANCE
2.12 PRIMARY SIDE CABLE SIZE & TYPE
2.13 SECONDARY SIDE CABLE SIZE &
TYPE/BUS DUCT
2.14 OFF LOAD TAP CHANGER
i) TYPE
ii) REGULATION RANGE
iii) NO. OF STEPS
2.15 WINDING MATERIAL COPPER

3.0 PERFORMANCE

Format No Ref. Proc. No Issue No Rev No Rev. Date


ODS/SOF/ ODS/SOP/008 to 015 01 01 15/10/2003
No. DS 4042
DATA SHEET FOR
OFFSHORE POWER AND Rev. No. 0
DESIGN DISTRIBUTION
SECTION TRANSFORMER Discipline Elect
Page: 2 of 3

3.1 LOSSES
i) NO LOAD LOSSES AT 100% V
ii) FULL LOAD CU LOSSES AT 750C
3.2 NO LOAD CURRENT AT 100% V
3.3 EFFICIENCY
i) AT FULL LOAD
ii) AT 1/4 FULL LOAD
iii) AT 1/3 FULL LOAD
3.4 LOAD AT WHICH MAXIMUM
EFFICIENCY OCCURS

4.0 MECHANICAL DATA


4.1 WEIGHTS ( KG )
i) CORE AND WINDING
ii) TOTAL
4.2 DIMENSIONS ( mm )
i) Lx B x H
ii) C/C OF ROLLERS
4.3 HV CABLE ENTRY • TOP
• BOTTOM
4.4 LV CABLE/BUS DUCT ENTRY • TOP
• BOTTOM
4.5 HV/LV TERMINAL LOCATION 900/1800 APART

5.0 ACCESSORIES
5.1 COOLING FAN
5.2 OFF LOAD TAP CHANGER
5.3 BI-DIRECTIONAL ROLLERS
5.4 SEPARATE NEUTRAL BUSHING
5.5 CABLE TERMINATION BOXES FOR HV
& LV
5.6 LIFTING LUGS
5.7 WINDING TEMPERATURE INDICATOR
5.8 NEUTRAL CT
5.9 DIFFERENTIAL CT
5.10 HV & LV CONNECTORS/LUGS
No. DS 4042
DATA SHEET FOR
OFFSHORE POWER AND Rev. No. 0
DESIGN DISTRIBUTION
SECTION TRANSFORMER Discipline Elect
Page: 3 of 3

5.11 CONTROL CABLING FROM


INDIVIDUAL DEVICES UPTO THE
MARSHALLING BOX INCLUDING
CABLE GLANDS AND LUGS

NOTES

1.0 BLANK DATA SHEET SHALL BE FILLED UP BY VENDOR /


CONTRACTOR.

2.0 COMPLETED DATA SHEET SHALL BE TREATED AS GUARANTEED


TECHNICAL PARTICULARS.

3.0 CONTRACTOR/VENDOR SHALL FURNISH GENERAL


ARRANGEMENT DRAWINGS ALONGWITH DIMENSIONS OF THE
TRANSFORMERS.

4.0 DATA SHEETS FOR EACH TYPE OF TRANSFORMER SHALL BE


PREPARED SEPARATELY BY THE VENDOR/CONTRACTOR.

You might also like