HOHMTECH PRODUCT SPECIFICATION Lithium fon HTIG2 26650 4330mAn HTIG2-PSABCRevi3 2018-1210 13 PRODUCT SPECIFICATION Rechargeable Lithium ton Cell Model: HTIG2-26650 Ayu HOHMTECHPRODUCT SPECIFICATION HouMTECH Liu on HT1G2 26660 4330mAn HTIGZPS-ABCRevi9 2018-12-40 13, Revision History Revision Date | Originator Description ° 2016-11-20 | Jackie Li = Original release of BBCHT 26650 ABC HTC 1 2016-11-25 | Andy Chow | - Foundation uided by IC Chem Policies 2 2018-11-28 | Huang Yeoh | -0.20% Ni replaces 0.15% In & 0.05% Mn nor 3 2015-12.04 | Sammo Chen _| 0.14% Co, 0.31% Nireplaces-0.46% Mn 4 2015-12-21 | Huang Yeoh | -0.05% Co replaces 0.05% Ni 5 2016-01-08 | Zhang Wen | - 0.40% Co, 1.0% Ni replaces 4.40% Mn raw 6 2016-01-16 | Joe Jinping | - BBC PTC updated to Ennanoed PTC (EPTO) eR 2016-02-13 | XinciLama __| - Cathode developed to IC & HT! spec v7.24 -0.3mm a 2016-03-02 | Tony Yong! _ | - BBC poly sal replaced with IC & HT! bitumen poly 9 2016.03.26 | KlarizaHan | - Cathode moteral updated to UHPAI 10 | 2016.03.20 | Andy Chow | -4.1.384.32 tem modifi in allance oC PS 11 | 2016-0404 | Huang Yeoh | - Testing process updated to IC PS 12 | 20e0227 | Update = Seaton 1.2 Applicaton to Product Classification 13 | 2oret04 | Update = Tooling W7' system with OSV3.2 process |PRODUCT SPECIFICATION HONMTECH Lithium ton HTIG2 28850 4330mah HTIG2-PS-ABC-Revi3 2018-12-10 Contents Contents 1. General Information 1.1 Scope 41.2 Product Classification 41.3 Model Name 2. Nominal Specification 2.4 Nominal Capacity 2.2 Nominal Voltage 2.34 Standard Charge 2.32 Fast Charge 2.4 Max. Charge Voltage 2.5 Max. Charge Current 2.6.1 Standard Discharge 2.6.2 Fast Discharge 2.7 Max. Discharge Current 2.8 Weight 2.9 Operating Temperature 2.10 Storage Temperature (for shipping state) 3. Appearance and Dimension 3.1 Appearance 3.2 Dimension 4, Performance Specification . 441 Standard Test Condition 4.2 Electrical Specification 4.3 Environmental Specification 4.4 Mechanical Specification 4.5 Safety Specification Cautions and Prohibitions in Handling...HO monroe HOHMTECH Lithium lon HTIG2 26650 4330mAn HTIG2-PS-ABC-Revis 20181210 13, 1. General Information 1.4 Scope: This product specification defines the requirements of the rechargeable lithium ion battery set forth and suppliod to end consumer Hohm Tech International 1.2 Product classification: Cylindrical rechargeable lithium ion call 1.3 Model name: HTG2 26650 2. Nominal Specification item Condition / Note Specification 2.4 Capacity Std. charge/discharge sere ee Minimum 4244mAh (Cron) 2.2 Nominal Voltage ‘Average for St, discharge 30 23.1 Standard Charge | Constant eurent *1B00mA (TA) (Refer to 4.1.1) Constant voltage av End condition (Cut of) 100mA (0.14) 2.32 Fast charge Constant current "| 4000mA (A) (Refer to 4.1.3) Constant voltage anv End condition (Cutoff) 100mA (0.14) 2.4 Max. Charge Voltage _| 4.2V charge, 2.5V discharge limit | 4.2V 2.5 Max. Charge Current | 1.25Cron [= 1C extends cycles} _| 5304MA [5.3044 - (1.225Cran)] 2.6.1 Standard Discharge | Constant current ‘8G6mA [0.866A - (0.2C ron] (Refer to 4.1.2) End voltage (Cut off) 25v 2.6.2 Fast Discharge Constant current “15000mA (715A), 30000mA (30A)] (Refer to 4.1.3) End voltage (Cut off) 28V 2.7 Max. Discharge Current | Continuous; 80°C temperature cut | 30300mA (CC): 41100mA (*) 2.8 Weight Max. 89.8 #219 2.9 Operating Temperature | Charge 0-450 (Cell Surface Temperature) | Discharge 20-800 2.40 Storage Temperature | 1 month “10~ 450 (for shipping state) ‘3month -10~350 year -10~ 20% “Test and Shipping Data: $13 random sample method . 4.47% of fly charged state“ 27 Max. Discharge Curent ntl =80°C or2.8V 257 Cont Cys Lil roduc sgh ates” Node 47BOOMA 890s [VO] DC est PASS. 48| PRODUCT SPECIFICATION HOHMTECH Lithium fon HTIG2 26650 4330mAn HTIGZPSABCRevig 2018-1210 13, 3. Appearance and Dimension 3.1 Appearance ‘There shall be no such defects as a single deep scraich, crack, rust, discoloration or leakage, which may affect the commercial value of the cel. 3.2 Dimension Diameter 26.1 40.2 mm Diameter is defined as the largest data value measured on the “A area of a cylindrical cel Height 65.4 20.3 mm 26.1 20.2 65.4 40.3, 4, Performance Specification 4.1 Standard test conaition 4.4.4 Standard Charge Unless otherwise spectied, “Standard Charge" shall consist of charging at constant current of 1500mA, The cell shall then be charged at constant voltage of 4.2V while tapering the charge current. Charging shall be terminated when the charging current has tapered to 100mA. For test purposes, charging shall be 8PRODUCT SPECIFICATION HONMTECH Lithium fon HT1G2 26850 4330mAh HTIGZPS-ABCRevIs 2018-1210 13 performed at 23°C + 2°C. 4.4.2 Standard Discharge “Standard Discharge” shall consist of discharging at a constant current of 866mA to 2.5V. Discharging is to be performed at 23 °C + 2 °C unless otherwise noted (such as capacity versus temperature) 4.1.3 Fast Charge / Discharge condition Cells shall be charged at constant current of 4000mA to 4.2V with end current of 100mA. Cells shall be discharged at constant current of 15000mA and 30000mA to 2.8V. Cells are to rest 10 minutes after charge and 30 minutes after discharge 4.2 Electrical Specification Item Condition ‘Specification 421 Cell shall be measured at 1kHz after charge per | = 15 m@, without EPTC Initial AC Impedance | 4.1.4 422 ell shall be charged per 4.1.1 and discharged | > 4244man Initial Capacity per 4.1.2 within 1h after full charge. 423 Calls shall be charged and discharged per 4.1.3, | = 60% (Of Cyon in 2.1) Cyd Lite 300 cycles(15A) and 200 eycles(30A). A cycle is defined as one charge and one discharge. 301* (15A) and 201* (30A) discharge capacity shall be measured per 4.1.1 and 4.1.2 4. Environmental specification, {tem Condition Specification 434 ells shall be charged per 4.1.1 and stored ina | Capacity recovery rate Storage Characteristics | tomperature-controlled environment at 20°C + | = 80% (of Canin 2.1) 5°C for 28 days. After storage, cels shall be discharged per 4.1.2 to obtain the remaining capacity’. 432 ells shall be charged per 4.1.1 and stored in a | No leakage, High Temperature temperature-controlled environment at 60°C for | Capacity recovery rate ‘Storage Test 4 hours, After storage, calls shall be | = 85% (of Caan in 2.1) discharged per 4.1.2 and cycled per 4.1.1 and 4.1.2 for 3 cycles to obtain recovered capacity’ + Remaining Capacity: Aer storage, oss sl be discharged with standard contion(41.2) to measure the remaining capacity, «Recovery Capscty Afr strepe, cls shal be dscharges wily standard discharge condion (4.12), and then calls shal be charged wth ‘andard charge sanction (41-1) -and then dscharged wth staraara ischarge conion (4.12) This charge / discharge cjcie shall be fepeate tres testo maasure recovery capeciy oePRODUCT SPECIFICATION HOHMTECH et acum te bee Lithium lon HTIG2 26650 4330man HTIG2-PS-ABC-Revi3 2018-12-10 13 433 190°C oven (1h) — 3h —> -20°C (1h) for 8 cycles | No leakage Thermal Shock Test with cells charged per 4.1.1 Afler test, cells are discharged per 4.1.2 and cycled per 4.1.1 and 4.1.2 for 3 cycles to obtain recovered capacity. Capacity recovery rate © 75% (Of Cyan in 2.1) 434 Cells shall be charged per 4.1.1 at 23°C #2°C Temperature and discharged per 4.1.2 at the following Dependency of temperatures. Capacity Charge Discharge Capacity “06 60% (of Comin 2.1) oc 75% (of Con in 2.1) ze 200 100% (of Cen in 2.1) soe 80% (of Cum in 2-1) 44 Mechanical Specification item Condition Spectication "| Celis charged per 4.1.4 are dropped onto an oak board | No leakage Drop Test from 1 meter height for 1 cycle, 2 drops from each cell | No temperature rising terminal and 1 drop ftom side of cel, (Total number of drops =3), 442 _| Cells charged per 4.1.1 are vibrated for 90 minutes per | No leakage Vibration Test | each of the three mutually perpendicular axes (x,y. 2) with total excursion of 0.8mm, frequency of 10H2 to ‘5SHz and sweep of 1Hz change per minute. 45 Safety Specification [tem Gonaition ‘Spesifcation Calls are discharged per 4.12, then charged at a 454 constant curent of 8.5A [2C1 tl 10°C Tower than Max] oc Noe Overcharge Test | temperature, Charging is continued for 7 hours (Per L162) 452 Gels are charged per 41.1, and the positive and Extemal Short - | negative terminal is connected by a 100 m®-wire for 1| No explosion, No fre Circuiting Test | hour (Per UL1642). 7PRODUCT SPECIFICATION H HOHMTECH Lithium lon HTIG2 26660 4330mAN HTIG2PSABC-Revis 2018121013, Ae Cells discharged i ells are discharged at constant curent of 0.2C to Overdischarge No explosion, No fire 250% of the minimum capacity Test Calls are charged per 4.1.1 and heated in a circulating |4s4 air oven at a rate of 5 per minute to 130°C. At 130°C, No explosion, No fire Heating Test [oven is to remain for 10 minutes before test is discontinued (Per UL.1642). Cells charged per 4.1.1 are impacted with their |ass longitudinal axis parallel to the flat surface and No explosion, No fire Impact Test | perpendicular to the longitudinal axis of the 15.8mm siameter bar (Per UL1642). a Cells charged per 44.1 are crushed with their longitudinal axis parallel to the flat surface of the | No explosion, No fro Crush Test crushing apparatus (Per UL1642) 5. Caution and Prohibition in Handling ‘Waming for using the lithium ion rechargeable cell. Mishandling of the cell may cause heat, fire and {deterioration in performance. Be sure to observe the following, Notice: Battery or batteries defined by term ‘cel, ‘coll. Caution + When using the application equipped with the cells), refer to the user's manual before use. + Please read the specific charger manual before charging, + Ifcallis not charged with long exposure to the charger, discontinue charging + Cell must be charged at operating temperature range 0 ~ 50 °C. + Cell must be discharged at operating temperature (cell surface temperature) range -20 ~ 80 ‘+ Please check the positive (+) and negative () direction before packing, + When a lead plate or wire is connected to the cell for packing, check out insulation not to short-circuit. + Coll must be stored separately. + Cell must be stored in a dry area with low temperature for long-term storage. + Do not place the callin direct suntight or heat. + Donot use the cell in high static energy environment where the protection device can be damaged, + frst or smell is detected on first use, please return the product to the seller immediately. +The cell must be kept away from children and pets. + When cel life span shortens after repeated use, replace with new cals crPRODUCT SPECIFICATION HOHMTECH Lithium lon HTIG2 26650 4330mAh HTIG2-PS-ABC-Revi3. 2018-12-10 Prohibitions + Donot use charger that is not specifically for lithium ion cells (batteries) + Donot use cigarette jacks (in cars) for charging, + Do not charge with constant current more than maximum charge current, + Donot charge with voltage more than maximum charge voltage. + Donot disassemble or reconstruct the cell (battery). + Donot throw or cause impact. + Donot pierce a hole in the cell with sharp things. (such as nail, knife, pencil or dil, etc.) + Donot use with other model, brand, capacity, or size of cel + Donot solder on cell directly. + Donot press the cell with overtoad in manufacturing process, especially ultrasonic welding, + Donot use old and new cells together for packing + Do not expose the battery to high heat. (such as fire) + Donot put the ceil into a microwave or high pressure container. * Do not use the cell with reversed polarity + Do not connect positive(+) and negative(-) with conductive materials. (such as metal, wire) + Dornot allow the callto be immerged in or wetted with water or sea-water. + Do not use iftabel wrap covering cell has any tears or punctures. ‘+ Do not build or use a ithium cell pack without consulting a certified pack assembler. + Donot exceed specifications of cell output or charging input limitations. ‘+ Have space or non conductive spacer between cells if adjacent cells have aifferent polarity. ANY QUESTIONS REGARDING USE OF, HANDLING OF, OR RECYCLING OF LITHIUM ION CELLS, VISIT THE FOLLOWING RESOURCES: http:featteryuniversity.com! https:ziwwwcall2recycle.orgflocator!