Scribd
Upload
27 views

Packet Trace1

The document examines ARP tables and the ARP process across multiple devices. It contains instructions to generate ARP requests and traffic to populate MAC address tables. Key points include: - An ARP request is broadcast to the network to resolve an IP to MAC address when pinging 172.16.31.3 from 172.16.31.2. The destination MAC address in the ARP request can be found in the switch's MAC table. - Additional pings are sent to populate the MAC tables on Switch0 and Switch1, showing learned entries. - Pinging a remote IP 10.10.10.1 from 172.16.31.2 causes an ARP request for Router1, though the destination is

Uploaded by

Nadia Cruz Santiago
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
27 views

Packet Trace1

The document examines ARP tables and the ARP process across multiple devices. It contains instructions to generate ARP requests and traffic to populate MAC address tables. Key points include: - An ARP request is broadcast to the network to resolve an IP to MAC address when pinging 172.16.31.3 from 172.16.31.2. The destination MAC address in the ARP request can be found in the switch's MAC table. - Additional pings are sent to populate the MAC tables on Switch0 and Switch1, showing learned entries. - Pinging a remote IP 10.10.10.1 from 172.16.31.2 causes an ARP request for Router1, though the destination is

Uploaded by

Nadia Cruz Santiago
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Packet Tracer - Examine the ARP Table

Addressing Table
Device Interface MAC Address Switch Interface

Router0 Gg0/0 0001.6458.2501 G0/1

Router0
S0/0/0 N/A N/A
Router1 G0/0 00E0.F7B1.8901 G0/1

Router1
S0/0/0 N/A N/A
10.10.10.2 Wireless 0060.2F84.4AB6 F0/2
10.10.10.3 Wireless 0060.4706.572B F0/2
172.16.31.2 F0 000C.85CC.1DA7 F0/1
172.16.31.3 F0 0060.7036.2849 F0/2
172.16.31.4 G0 0002.1640.8D75 F0/3

Objectives
Part 1: Examine an ARP Request
Part 2: Examine a Switch MAC Address Table
Part 3: Examine the ARP Process in Remote Communications

Background
This activity is optimized for viewing PDUs. The devices are already configured. You will gather
PDU information in simulation mode and answer a series of questions about the data you
collect.

Instructions

Part 1: Examine an ARP Request


Step 1: Generate ARP requests by pinging 172.16.31.3 from 172.16.31.2.
Open a command prompt

a. Click 172.16.31.2 and open the Command Prompt.


b. Enter the arp -d command to clear the ARP table.
Close a command prompt

c. Enter Simulation mode and enter the command ping 172.16.31.3. Two PDUs will be
generated. The ping command cannot complete the ICMP packet without knowing the
MAC address of the destination. So the computer sends an ARP broadcast frame to find
the MAC address of the destination.
d. Click Capture/Forward once. The ARP PDU moves Switch1 while the ICMP PDU
disappears, waiting for the ARP reply. Open the PDU and record the destination MAC
address.
Question:

Is this address listed in the table above?


Question:
How many copies of the PDU did Switch1 make?
What is the IP address of the device that accepted the PDU?
e. Open the PDU and examine Layer 2.
Question:

What happened to the source and destination MAC addresses?


f. Click Capture/Forward until the PDU returns to 172.16.31.2.
Question:

How many copies of the PDU did the switch make during the ARP reply?

Step 2: Examine the ARP table.


a. Note that the ICMP packet reappears. Open the PDU and examine the MAC addresses.
Question:

Do the MAC addresses of the source and destination align with their IP addresses?
b. Switch back to Realtime and the ping completes.
c. Click 172.16.31.2 and enter the arp –a command.
Question:

To what IP address does the MAC address entry correspond?


In general, when does an end device issue an ARP request?

Part 2: Examine a Switch MAC Address Table


Step 1: Generate additional traffic to populate the switch MAC address table.
Open a command prompt

a. From 172.16.31.2, enter the ping 172.16.31.4 command.


b. Click 10.10.10.2 and open the Command Prompt.
c. Enter the ping 10.10.10.3 command.
Question:

How many replies were sent and received?


Close a command prompt

Step 2: Examine the MAC address table on the switches.


a. Click Switch1and then the CLI tab. Enter the show mac-address-table command.
Question:

Do the entries correspond to those in the table above?


b. Click Switch0, then the CLI tab. Enter the show mac-address-table command.
Questions:

Do the entries correspond to those in the table above?


Why are two MAC addresses associated with one port?

Part 3: Examine the ARP Process in Remote Communications


Step 1: Generate traffic to produce ARP traffic.
Open a command prompt

a. Click 172.16.31.2 and open the Command Prompt.


b. Enter the ping 10.10.10.1 command.
c. Type arp –a.
Question:

What is the IP address of the new ARP table entry?


d. Enter arp -d to clear the ARP table and switch to Simulation mode.
e. Repeat the ping to 10.10.10.1.
Question:

How many PDUs appear?


Close a command prompt

f. Click Capture/Forward. Click the PDU that is now at Switch1.


Question:

What is the target destination IP destination address of the ARP request?


g. The destination IP address is not 10.10.10.1.
Question:

Why?

Step 2: Examine the ARP table on Router1.


a. Switch to Realtime mode. Click Router1 and then the CLI tab.
b. Enter privileged EXEC mode and then the show mac-address-table command.
Question:

How many MAC addresses are in the table? Why?


c. Enter the show arp command.
Questions:

Is there an entry for 172.16.31.2?


What happens to the first ping in a situation where the router responds to the ARP request?

You might also like