MOTOTRBO R01.09.10 Firmware Release Notes
MOTOTRBO R01.09.10 Firmware Release Notes
Version: R01.09.10
Definitions ..................................................................................................................................................... 3
Definitions
A known issue is a problem that is currently unresolved (open).
A closed or resolved issue is one that has been repaired and no longer should occur in the product after
upgrading to the new product version.
The risk and workaround aspects are included in the release note description (Known Issues) for overall
assessment of the problem.
2) MOTOTRBO CSA Battery: Software added to MOTOTRBO CSA portables that will differentiate a
battery used for a 1W versus a 2W portable, and display an "Incorrect Battery" alert on the radio screen
if the incorrect battery has been attached.
Workaround N/A
Product /
Version
Issue Number Found Impact Description
CCMPD01623133 1.09.00 In a Linked Capacity Plus system, Remote Monitor calls may occasionally end
prematurely after the call is successful (with the display showing “remote monitor
ended” in the monitoring radio). The monitoring radio will continue to pick up the call
as a private call thereafter.
CCMPD01588445 1.09.00 MOTOTRBO mobiles do not send out audio via rear Tx Audio Pin when initiating an
Emergency Hot Mic
CCMPD01640224 1.00.00 XPR 8300, XiR R8200, DR 3000, DGR 6175, and MTR3000 repeater antenna relay pin
gets stuck when in transmit state (analog only)
CCMPD01679279 1.09.02 The Master repeater in an LCP system will periodically reboot if the "All Talkgroup Wide
Area" parameter is disabled
CCMPD01684195 1.09.00 After upgrading MOTOTRBO subscribers to R1.09.00, a Private Call/Call Alert locks up
the radio.