T06N Query SMS Commands

No
Function Command Reply Explanation
.

Check GT06N firmware e.g.[VERSION]GT06B_10_8MM_B25_V11_LA [BUILD]2013/01/04

1 VERSION#
version 17:45

eg
GPS report on time interval：
IMEI:868120103643505;TIMER:20,20; SENDS:5; SOS:13730454825,,;
Center Number:;Sensorset:10,1,5,1; Defense time:10;
TimeZone:E,8,0;
2 Check GT06N parameters PARAM#
GPS report on distance interval：
IMEI:868120103643505;Distance:200; SENDS:5; SOS:13730454825,,;
Center Number:;Sensorset:10,1,5,1; Defense time:10;
TimeZone:E,8,0;

egGPRS:ON; APN:CMNET,,;
Query GT06N network
3 GPRSSET# Server:1,hgt06.szdatasource.com,8841,0;
setting
URL:http://maps.google.com/maps?q=;

4 Check GT06N status STATUS# egBattery:3.41V,Battery too low! Warning; GPRS:Link Up; GSM Signal
Level:Strong; GPS:Successful positioning, SVS Used in fix:10(11),
 GPS Signal Level:32,31,32,31,28,29,29,36,32,33; ACC:OFF;
Defense:OFF

egCurrent position!
5 Check position status WHERE# Lat:N22.577156,Color:E113.916748,Course:0.00,Speed:0.00Km/h,Date
Time:2013-01-08 17:35:32

eg<01-08
6 Check URL URL#
17:36>http://maps.google.com/maps?q=N22.577156,E113.916748

eg
POSITION#
GPS location: <01-08
7 Check position OR
17:36>http://maps.google.com/maps?q=N22.577156,E113.916748
123
GPS not located: GPS not fixed, please wait for a while, and then try again.

egFenceType:Circle, ON, Latitude:N22.577091,

Longitude:E113.916748, radius:600m, in out:IN or OUT, alarm type:1
8 Check geo fence status FENCE#
FenceType:Circle, OFF, Latitude:0.000000, Longitude:0.000000,
radius:0m, in out:IN or OUT, alarm type:1

egMoving Switch:OFF; Radius:300m; Alarm type:1

9 Check moving status MOVING# Moving Switch:ON; Lat:N22.577080; Color:E113.916794; Radius:300m;
Alarm type:1

GT06N Query SMS Commands

GT06N Settings SMS Commands

No
Function Command Reply Explanation
.

GT06N SETTING
CLASS

APN, [apnname]#
Close automatic APN and set by yourself.
OR
1 Set APN APN, [apnname],[user],[pwd]#

APN# Check the current APN parameters.

X=ON/OFF;
ASETAPN, [X]# ON: open automatic APN;
Set automatic OFF: close automatic APN.
2
APN

ASETAPN# Check automatic APN status

3 Set server SERVER,mode,domainName/IP,port,protocol# eg: SERVER,1,www.ydpat.com,8011,0#

SERVER,0,211.154.135.113,8011,0#
mode = 1 means set with domain name
 mode = 0 means set with ip address

protocol = 0 means connect server with TCP

protocol
parameters protocol = 1 means connect server with UDP
protocol

SERVER# Check the current saving parameters

A：E or W；”E” means eastern time zone, “W”

means western time zone；default：E
GMT,[A],[b],[C]#
Set GMT B：0～12；time zone default：8
4 parameter For C：0/15/30/45；half time zone；default：0
GT06N

GMT# Check the current time zone parameters

Restore GT06N to
5 FACTORY# Restore to factory setting
factory

set the network links for latitude and longitude,

EURL,network links#
default: http://maps.google.com/maps?q=
6 Edit URL

EURL# Check the current URL

 X=0 or 1;”1″ means GPRS ON, “0” means GPRS
GPRSON,X#
OFF, default:1
7 GPRS Switch

GPRSON# Check the current GPRS status

The device would reboot in 20S after receiving the

8 Reboot GT06N RESET#
command.

GPRSALM,X# X=ON/OFF, default: OFF

GPRS blocking
9
alarm
GPRSALM# Check the GPRS alarm status

10 SOS setting SOS,A,[phone number 1][,phone number 2]

Add SOS phone number.
[,phone number 3]#

SOS,D,[sequence number 1][, sequence number Delete the phone number according to the sequence
2][,sequence number 3]# number.

SOS,[D],[phone number]# Delete the matching SOS phone number.

 SOS# Check the SOS phone number.

CENTER, A, [phone number]# Add center phone number.

Center phone
11 CENTER, D# Delete center phone number.
number setting

CENTER# Check the center phone number.

T1 ranges 1~19(minutes), heartbeat packet upload

interval when ACC ON; default is 3;
HBT,[T1],[T2]#
T2 ranges 1~19 (minutes), heartbeat packet upload
Heartbeat interval interval when ACC OFF; default is 5;
12
setting

HBT# Check the current parameters of T1 and T2.

T1 ranges 5~18000 or 0(seconds), upload interval

when ACC ON, 0 means no upload, default is 10;
TIMER,[T1],[T2]#
T2 ranges 5~18000 (seconds), upload interval when
Set GPS data ACC OFF, default is 10;
13
sending interval

TIMER# Check the current parameters of T1 and T2.

 D ranges 50~10000 or 0(meters), distance interval,
DISTANCE,[D]#
Set distance default is 300;
14 interval of GPS
data sending
DISTANCE# Check the current distance interval.

X=ON/OFF, default：ON
A=5～180 degrees, diversion angle degree,
ANGLEREP,[X][,A][,B]# default：30 degrees；
B=2～5 seconds, detecting time, default：3
seconds,
Set the angle
15
upload
ANGLEREP,OFF# Close the angle upload.

ANGLEREP# Check the angle upload status and its parameters.

A=ON/OFF, upload for ACC status change,

ACCREP,[A]#
default: ON
Set the upload for
16
ACC status change
ACCREP# Check the upload for ACC status change.

17 Set the GPS data BATCH,[A][,N]# A= A=ON/OFF, data sending batch function on or
off, default:OFF
N=1～50, N means the number of messages in the
 batch, default：10；
sending batch
BATCH# Check the number of messages in a batch.

A= 1～60 (minute), delay of the defense, default:

DEFENSE,[A]#
10 (minutes).
Set the delay of
18
the defense
DEFENSE# Check the parameters of the defense.

A=10-300 seconds, detecting time. Default: 10

seconds
Set vibration B-10-300 seconds, alert delay. Deault:180 seconds
19 sensor detecting SENSOR, ,[,B][,C]#
time C=1-3000 minutes, vibration alert interval. Default:
30 minutes
SENSOR# Check the parameter of the status

A=0-300(minute), time duration for GPS to work

SENDS,[A]# once vibration detected, 0 means GPS always on
Set the GPS time work, default: 5(minute)
20 controlled by
sensor
SENDS# Check the parameters of the time.
21 disarm DSRESET# DSRESET# Cancel the current Arm status

Clear the backup

22 CLEAR#
data

A=ON/OFF；static drift filtering switch；default:

ON
SF,[A][,B]#
B=10-1000(m)；maximal filtering distance；
Set the static data default: 100(m)；
23
filtering

SF# Check the parameters.

A=0/1；0 means connection, 1 means cut off；

RELAY,[A]#
Set the default: 0.
24 petrol/electricity
control
RELAY# Check the status of the control.

Set delay time of A=0、5-18 seconds; Default: 10 seconds (Enter

25 DELAY, #
voice monitor Listen-In after 10 senconds calling)

26 Set the fence alarm FENCE,[B],0,[D],[E],[F],[X],[M]# circle area;

B=ON/OFF, open or close fence alarm, default:
close;
 D=the latitude of the circle center;
E=the longitude of the circle center;
F=1～9999, the fence radius, unit: 100 meters;

X = in/out ； in: Alarming where get in the fence,

out: alarming where get out the fence, blank Means
Both Alarming When Get in or Get Out the Fence,
Default: Blank.
M=0/1；way of alarming, 0: GPRS only, 1:
SMS+GPRS, default: 1

FENCE,[B],1,[D],[E],[F],[G][,X][,M]# rectangle area

B=ON/OFF, open or close fence alarm, default:
close;
D=the latitude of the position 1；range：-90 ～
90(degree)；
E=the longitude of the position 1；range：-180 ～
180(degree)；
F=the latitude of the position 2；range：-90 ～
90(degree)；
G=the longitude of the position 2；range：-180 ～
180(degree)；
the latitude supports “N/S” or “+/-” coming before
it’s value；
the longitude supports “E/W” or “+/-” coming
before it’s value；；
 FENCE# Check the parameters of the fence.

A=ON/OFF, default: OFF;

SENALM,[A][,M]# M=0/1/2, way of alarming, 0 :GPRS only, 1:
SMS+GPRS, 2 : GPRS+SMS+phone call, default:1
Set the vibration
27
alarm
SENALM,OFF# Close vibration alarm

#SENALM Check the parameters of the alarm

A=ON/OFF, default：ON;
M=0/1/2, way of alarming, 0: GPRS only, 1:
SMS+GPRS, 2: GPRS+SMS+phone call, default：
POWERALM, [A][,M][,T1][,T2]#
1；
T1=2～60 (second), default：5；
Set the power cut- T2=1～3600 (second), default：300；
28
off alarm

POWERALM, OFF# Close the power alarm.

POWERALM# Check the parameters of the alarm.

 A=ON/OFF, default：ON;
M=0/1/2, way of alarming, 0: GPRS only, 1:
BATALM, [A][, M]#
SMS+GPRS, 2: GPRS+SMS+phone call, default：
1；
Set the low battery
29
alarm
BATALM,OFF# Close the low battery alarm.

BATALM# Check the parameters of the alarm.

A=ON/OFF, default：ON;
M=0/1/2, way of alarming, 0 :GPRS only, 1:
SOSALM,[A],[M]#
SMS+GPRS, 2 : GPRS+SMS+phone call, default：
1；
30 Set the SOS alarm
SOSALM,OFF# Close the SOS alarm.

SOSALM# Check the parameters of the alarm.

CALL,N# N=1～3, default：3, times to dial all numbers;

Set the dialing
31
times
CALL# Check the parameters of the dialing.
 A=ON/OFF, default：OFF; R=100～1000, moving
radius, unit: meter, default: 300；
MOVING,[A][,R][,M]#
M=0～2, 0: GPRS only, 1: SMS+GPRS, 2:
GPRS+SMS+phone call, default：1；
Set the moving
32
alarm
MOVING,OFF# Close the moving alarm.

Check the status and parameters of the moving

MOVING#
alarm.

A=ON/OFF, open or close over speed alarm,

default:OFF
B=5～600 (second), time interval, default: 20
(second)
SPEED,[A][,B][,C][,M]#
Set the overspeed C=1～255(km/h), speed limit, default：100(km/h);
33
alarm M=0/1, way of alarm, 0: GPRS only, 1:
SMS+GPRS, default：1.

SPEED# Check the parameters of over speed.

Set sensitivity of A=1-5: sensitivity range; default:2

34 LEVEL, #
SENSOR LEVEL# check the current sensitivity of sensor
 A=ON/OFF, LED sleep mode control,
LEDSLEEP,[A]# ON: start LED sleep mode, OFF: LED normal
Set the LED sleep display, default：ON；
35
mode

#LEDSLEEP Check the parameters of LED sleep mode.

PWDSW,[A]# A= ON, enable the instruction password.

Set the instruction

37 Numbers and letters mix inputs supported for
password
instruction password, at least 1 character, no more
PWDSW,[password],[B]#
than 19 characters, default: 000000;
B=OFF, disable the instruction password.

A=old password, numbers and letters mix inputs

supported, at least 1 character, no more than 19
characters, default: 000000;
PASSWORD,[A],[B]#
B=new password, numbers and letters mix inputs
Revise the supported, at least 1 character, no more than 19
38 instruction characters.
password

A=instruction password, numbers and letters mix

RECOVER,[A]# inputs supported, at least 1 character, no more than
19 characters, default: 111111.
 A=phone number, phone number to send;
Set the SMS
40 FW,[A],[B]# B=SMS content, content forward. Only SOS can
forwarding
use this command.

GT06N Settings SMS Command

Share the article

GT06NSMS CommandsText CommandsCar Tracking DeviceVehicle Tracking Device

Previous Article
How to issue an operating card (operating card) for trucks in 2024

Next Article
How to activate the PG12 GPS Tracker

Leave a comment