CENTRO-MATIC ®

AUTOMATED LUBRICATION
SYSTEMS

"I install Lincoln Centro-Matic systems with confidence because I know

they're going to prolong the life of my customer's critical machinery."

Les Maness, Installation Foreman,

Lincoln Distributor
People, Capabilities and Systems to
Save Money and Increase Productivity
We’re the largest and most
successful company in our field Industrial
because we continually satisfy our Solutions
customers with the world’s best
lubrication and pumping systems.
For almost 90 years, companies
have relied on our technical and
quality leadership, our world-class
manufacturing and customer
service, and our vast network of
distributors and support facilities.
Worldwide Support
Lincoln develops new products
and systems at research and
development facilities in the
U.S., Germany and India that
provide global and regional
application solutions.

We have solutions for large

processing plants, automotive
manufacturing, pulp and paper
mills, and food and beverage Quality
facilities. Virtually every industrial Manufacturing
professional involved in operations
and maintenance can benefit from
Lincoln systems.

On the road or in the field, Lincoln

protects heavy equipment used in mining,
construction, agriculture and over-the-road
trucking. The world’s leading manufacturers
offer our systems as standard equipment
or factory options. Customer Service
Lincoln builds precision metal
components, state-of-the-art
electronic controls, and the
industry’s top-performing pump
systems. Our quality systems in
BearingSaver®
the United States and Germany
are ISO 9001 registered.

With five technical support Research &

centers on three continents, and Development
a network of systems houses and
distributors supported by regional
sales and service offices, our
customers can always draw on
our worldwide resources.

To make sure your investment

results in significant savings,
Lincoln developed a unique
program called BearingSaver®.
Mobile Equipment
You not only get a complete
audit of your facility, you also
receive an analysis of your
return on investment.
Centro-Matic® Automated Lubrication Systems
Table of Contents

Introduction to Centro-Matic® . . . . . . . . . . . . . . . . . . 2

Grease Injectors . . . . . . . . . . . . . . . . . . . . . . . . . 5

Oil Injectors . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Metric Injectors . . . . . . . . . . . . . . . . . . . . . . . . . 15

Injector Accessories . . . . . . . . . . . . . . . . . . . . . . 16

P653S Electric Pump . . . . . . . . . . . . . . . . . . . . . . 18

P603S Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Manual Grease Pumps . . . . . . . . . . . . . . . . . . . . . 22

Air-Operated (Single Stroke) Grease Pumps . . . . . . . . . 23

Air-Operated (Reciprocating) Grease Pumps . . . . . . . . . 25

Electric Grease Pumps . . . . . . . . . . . . . . . . . . . . . 27

Manually Operated Oil Pumps . . . . . . . . . . . . . . . . . 27

Air-Operated (Single Stroke) Oil Pumps . . . . . . . . . . . 28

Air-Operated (Reciprocating) Oil Pumps . . . . . . . . . . . 30

Electric-Operated Oil Pumps . . . . . . . . . . . . . . . . . . 30

Bucket Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . 31

FlowMaster ® Hydraulic Pump . . . . . . . . . . . . . . . . . 32

FlowMaster® Electric Pumps . . . . . . . . . . . . . . . . . . 33

Hydraulic-Powered Grease Pumps . . . . . . . . . . . . . . 36

Airless Spray System . . . . . . . . . . . . . . . . . . . . . . 37

Pump Accessories . . . . . . . . . . . . . . . . . . . . . . . 39

System Controls . . . . . . . . . . . . . . . . . . . . . . . . 41

Numerical Index . . . . . . . . . . . . . . . . . . . . . . . . . 49

1
Centro-Matic® Automated Lubrication Systems
Introduction

Lincoln Centro-Matic® systems and components are made to match your application. Systems can service one machine,
different zones on one machine or even several separate machines. Regardless of the application, the principle of
centralized lubrication remains the same: a central pump station automatically delivers lubricant through a single supply
line to the injectors. Each injector serves only one lubrication point and may be accurately adjusted to deliver the precise
amount of grease or oil required. Centro-Matic systems give you multiple advantages over other designs.

Simplicity
Systems are easy to understand, install and maintain. You realize savings right from the start because one lubricant
supply line means lower installation costs.
Powerful Pumping Unit
Centro-Matic systems dispense either grease or oil in measured quantities, unaffected by normal temperature or
viscosity changes. For large systems, Lincoln’s single-line design and powerful pumps mean injectors can be located
long distances from original refinery containers or bulk lubricant tanks.
External Adjustment
Lubricant injectors are externally adjustable without special tools so each bearing can receive the correct amount of
lubricant. No under- or over-lubrication at individual points.
Visual Indicators
Each injector incorporates an indicator pin that gives visual confirmation the injector is operating correctly. When
necessary, troubleshooting is the simple process of checking indicator pins.
Ease of Service
When injectors finally need service, the job is quick and easy. No need to remove supply line connections or disturb
adjacent injectors. Replacement can usually be done between lubrication cycles, so there’s almost no lubricant loss
or downtime.
Parts and Service
You’re never far from a Lincoln authorized distributor. Qualified distributors offer design engineering, startup help and
training for your personnel in the use and maintenance of Centro-Matic systems. They’ll back you up with parts and
service for years after the sale.

Air-Operated Electric Manual Hydraulic

Actuated automatically by Used where compressed air Designed for smaller, A complete hydraulically-
compressed air at various is not available, or electrical individual machines, manual powered pumping unit for
pre-determined intervals. operation is preferred. Totally systems provide a low-cost, centralized lubrication of
An air-operated pump enclosed motor supplies the efficient method of distribut- individual machines. Usually
delivers lubricant to the power requirements of the ing lubricant to the injectors. installed on machinery such
injectors. When all injectors pumping mechanism. Time Cycling a complete bank of as coal mining and earth
have cycled, the pump shuts control is adjustable to injectors takes only a few moving equipment which
off automatically and vents provide predetermined seconds. In manually utilize a hydraulic pressure
lubricant pressure. Available frequency of lubrication. operated systems, the system. The frequency of
with automatic, manual or lubricant pump is hand- the lubrication cycle can be
mechanical controls. operated and the machine set manually or by mechani-
operator performs the cal or automatic controls.
lubrication intervals.

2
Centro-Matic® Automated Lubrication Systems
Introduction

Basic Operating Principles of Centro-Matic® Injectors

Each Lincoln Centro-Matic injector can be manually adjusted to discharge the precise amount of lubricant each
bearing needs. Injectors are mounted singly at each bearing, or grouped in a manifold with feedlines supplying
lubricant to the bearings. In each case, injectors are supplied with lubricant under pump pressure through a single
supply line. Two injector types are available: a top adjusting and a side adjusting. Both types can be used in the
same circuit; their selection is made on the basis of bearing lubricant requirements.

Indicator Indicator Indicator Indicator

Stem Stem Stem Stem

Discharge Discharge Discharge Discharge

Chamber Chamber Chamber Chamber
Measuring Measuring
Measuring Measuring
Piston Piston
Piston Piston

Slide Slide Slide Slide

Valve Valve Valve Valve

Stage 1 Stage 2 Stage 3 Stage 4

SL-V, SL-V XL
Stage 1—The discharge chamber is filled with lubricant from the previous cycle. Under pressure of incoming lubricant,
lubricant is directed to both sides of the measuring piston through the slide valve. The port to the bearing is closed in
this position which prevents the measuring piston from moving. The indicator stem will be at its innermost position,
having pulled away from the stop in the adjusting screw.
Stage 2—Pressure has built up and has moved the slide valve in position shown. This closes the flow passage to the
upper side of the piston (larger diameter) while simultaneously opening the port to allow lubricant to flow out of the
injector to the bearing. Pressure from the supply line continues to apply pressure to the lower portion of the measuring
piston, which causes a pressure difference across the measuring piston thus allowing it to move upward.
Stage 3—Movement of the measuring piston is shown caused by the pressure on the lower side of the measuring piston
dispensing lubricant out to the bearing. The indicator stem will move up against the stop in the adjusting screw when all
lubricant has been delivered to the bearing.
Stage 4—As the pressure in the supply line is vented down to 1,000 psi, the slide valve moves back to its rest position.
Flow of lubricant to the bearing is closed and simultaneously allows lubricant to flow to the upper (larger diameter) of
the piston. The displacement of fluid on the lower side of the measuring chamber is also allowed by the slide valve to
flow to the upper side of the piston. The injector is recharged by the residual pressure in the supply line to the upper
portion of the measuring chamber.

3
Centro-Matic® Automated Lubrication Systems
Introduction

Indicator
Injector Stem
Piston Injector
Measuring
Piston
Chamber

Discharge
Chamber
Discharge
Outlet Chamber
Slide Slide
Valve Port Valve
Passage
Passage
Lubricant
Supply Inlet
Stage 1 Stage 2 Stage 3 Stage 4

SL-1, -11, -41, -44

Stage 1—The injector piston is in its normal, or rest position. The discharge chamber is filled with lubricant from
the previous cycle. Under the pressure of incoming lubricant, the slide valve is about to open the passage leading
to the piston.

Stage 2—When the slide valve uncovers the passage, lubricant is admitted to the top of the piston, forcing the
piston down. The piston forces lubricant from the discharge chamber through the outlet port to the bearing.

Stage 3—As the piston completes its stroke, it pushes the slide valve past the passage, cutting off further
admission of lubricant to the passage. Piston and slide valve remain in this position until lubricant pressure
in the supply line is vented (relieved) at the pump.

Stage 4—After pressure is relieved, the compressed spring moves the slide valve to the closed position. This
opens the port from the measuring chamber and permits the lubricant to be transferred from the top of the piston
to the discharge chamber.

SL-32, -33, -42, -43

Stage 1—Incoming lubricant, under pressure from the
supply line, moves the injector piston forward. The piston Outlet
forces a pre-charge of lubricant from the discharge Measuring
Check
Chamber
chamber through the outlet check valve to the feed line. Valve
Lock Nut
Discharge
Stage 2—When the system is vented (pressure relieved), the Chamber
piston returns to the rest position, transferring lubricant from
the measuring chamber to the discharge chamber.

Applications—When it comes to eliminating costly,

manual point-by-point lubrication, Centro-Matic systems
have proven to be the right solution for many industries
and applications. Examples include: Adjusting
Nut

• Paper Converting • Printing • Food & Beverage Lubricant Indicator

• Plastic Processing • Packaging • Metalworking Supply Stem
Injector
• Wood Processing • Textile • Material Handling Inlet
Piston
Equipment
Stage 1 Stage 2

4
Centro-Matic® Automated Lubrication Systems
Grease Injectors

Series SL-33

• For single-line, high-pressure central lubrication system.

• For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2 (refer to Design Guide).
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of Injectors SL-32, SL-V, SL-V XL, SL-1 and/or SL-11.
• Individual injectors can be easily removed for inspection or replacement.
• Available in stainless steel SAE 304, for application where environmental conditions are hazardous to carbon steel or
in industries preferring stainless steel.

Specifications:
Series Output Operating Pressure
Min. Max. Min. Max. Typical Vent
.001 cu. in. .003 cu. in. 1200 psig 3500 psig 1500 psig 200 psig
SL-33
.016 cc .049 cc 83 bar 241 bar 103 bar 14 bar

Model Number Connections Dimensions

Stainless Steel of
Carbon Steel Outlets: Manifold Inlet Injector Outlet A in. A .mm. B in. B mm
(304)
83309-1 83715-1 1 1¹/₈ 29 1⁵/₈ 41
83309-2 83715-2 2 1⁷/₈ 48 2³/₈ 60
83309-3 83715-3 3 2⁵/₈ 67 3¹/₈ 79
83309-4 83715-4 4 ¹/₈" NPTF (F) 3³/₈ 86 3⁷/₈ 98
83309-5 — 5 ¹/₈" O.D. Tube 4¹/₈ 105 4⁵/₈ 117
83309-6 83715-6 6 4⁷/₈ 124 5³/₈ 137
— 83715-7 7 5⁵/₈ 143 6¹/₈ 156
83900 83900-9 1 ¹/₈" NPTF (M) Single Injector/No Manifold
83314 83314-9 — — Single Replacement Injector

Notes:
1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing — 1/8" O.D. as standard.
Other outlet connectors for feed line optional.
2. Injectors with manifolds include two mounting clips and screws.
3. Injectors have Nitrile packings (200°F max. / 93°C). Check packing compatibility with synthetic lubricants.
4. Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with two turns at .001 cu. in./turn.

5
Centro-Matic® Automated Lubrication Systems
Grease Injectors

Series SL-32

• For single-line, high-pressure central lubrication system.

• For dispensing petroleum-based lubricants with a viscosity up to NLGI No.2 (refer to Design Guide).
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of injectors SL-33, SL-V, SL-V XL, SL-1 and/or SL-11.
• Individual injectors can be easily removed for inspection or replacement.
• Available in stainless steel SAE 304, for application where environmental conditions are hazardous to carbon steel or
in industries preferring stainless steel.

Specifications:
Series Output Operating Pressure
Min. Max. Min. Max. Typical Vent
.001 cu. in. .008 cu. in. 1200 psig 3500 psig 1500 psig 200 psig
SL-32
.016 cc .131 cc 83 bar 241 bar 103 bar 14 bar

Model Connections Dimensions

Number of
Stainless Steel Outlets Injector
Carbon Steel Manifold Inlet A in. A .mm. B in. B mm
(304) Outlet
83336-1 83724-1 1 1¹⁄₄ 32 1¾ 44
83336-2 83724-2 2 2 51 2½ 63
¹⁄₄" NPTF (F)
83336-3 83724-3 3 2³⁄₄ 70 3¹⁄₄ 83
⅛" O.D. Tube
83336-4 83724-4 4 3½ 89 4 102
83338 — 1 ¹⁄₄" NPTF (M) Single Injector/No Manifold
83337 83337-9 — — Single Replacement Injector

Notes:
1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing — 1/8" O.D. as standard.
Other outlet connectors for feed line optional.
2. Injectors with manifolds include two mounting clips and screws.
3. Injectors have Nitrile packings (200°F max. / 93°C). Check packing compatibility with synthetic lubricants.
4. Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with five turns at .0014 cu. in./turn.

6
Centro-Matic® Automated Lubrication Systems
Grease Injectors

Series SL-V 1¼"

(32mm)

⅛"
8¾" NPTF
(222mm)
⅜"
(19mm) 13/32" (10.3mm)
Mounting
Holes

2⅛"
(54mm) ⅜" NPTF
(both ends)

1½" A 1⅜"
(38mm) (35mm)
B

• For single-line, high-pressure central lubrication system.

• For dispensing lubricants compatible with polyurethane seals up to NLGI No. 2 (refer to Design Guide).
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of injectors SL-32, SL-33, SL-1, SL-V XL and/or SL-11.
• Individual injectors can be easily removed for inspection or replacement.
• Each SL-V injector includes a clear polycarbonate protective cap.

Specifications:
Output Operating Pressure Connections
Series Material
Min. Max. Min. Max. Typical Vent Manifold Inlet Injector Outlet
2500
Carbon 0.015 cu. in. 0.08 cu. in. 1850 psig 6000 psig 1000 psig
SL-V psig 3⁄8” NPTF (F) 1⁄8” NPTF (F)
Steel 0.25 cc 1.31 cc 128 bar 415 bar 70 bar
170 bar

Dimension
Model Type Number of Outlets
A in. A .mm. B in. B mm
85770-1 One Injector Manifold 1 2½ 63
Single Mounting Hole
85770-2 Two Injector Manifold 2 3 76
85770-3 Three Injector Manifold 3 1¼ 32 4¹⁄₄ 108
85770-4 Four Injector Manifold 4 2 63 5½ 140
85770-5 Five Injector Manifold 5 3³⁄₄ 95 6¾ 171
85770-6 Six Injector Manifold 6 5 127 8 203
85771 Replacement for manifold injectors
85772 Single injector/no manifold (⅜" NPTF(M) inlet)

Notes:
1. Injector manifolds have 13⁄32" (10.3 mm) dia. mounting holes for 3⁄8" bolt.
2. Injectors have polyurethane seals Check compatibility with synthetic lubricants.
3. Injector rated for 180°F (80°C) max. ambient temperature, depending on lubricant used.
4. Injectors include fitting for filling feedlines via alternate outlet port.
5. Output with adjustment screw hand-tightened is .015 cu. in. Maximum output is achieved with five turns at .014 cu. in./turn.

7
Centro-Matic® Automated Lubrication Systems
Grease Injectors

Series SL-V XL 1¼”

(32mm)
High-Output
11³⁄₁₆”
(284mm)

⅛”
¾” NPTF
(19mm)

¹³∕₃₂” (10.3mm)
Mounting Holes
2⅛”
(54mm) ⅜” NPTF
(both ends)

1½” A
(38mm) B 1⅜”
(35mm)

• For single-line, high-pressure central lubrication system.

• For dispensing lubricants compatible with polyurethane seals up to NLGI No. 2 (refer to Design Guide).
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of injectors SL-32, SL-33, SL-1, SL-V and/or SL-11.
• Individual injectors can be easily removed for inspection or replacement.
• Two SL-V XL injectors are required to replace one SL-11 injector.
• Each SL-V XL injector includes a clear polycarbonate protective cap.
Specifications:
Series Material Output Operating Pressure Connections
Min. Max. Min. Max. Typical Vent Manifold Inlet Injector Outlet
Carbon 0.015 cu. in. 0.305 cu. in. 1850 psig 6000 psig 2500 psig 1000 psig 3⁄8" NPTF (F) 1⁄8" NPTF (F)
SL-V XL
Steel 0.25 cc 5.00 cc 128 bar 413 bar 172 bar 69 bar

Number of
Model Type A in. A .mm. B in. B mm
Outlets
85780-1 One Injector Manifold 1 2½ 63
Single Mounting Hole
85780-2 Two Injector Manifold 2 3 76
85780-3 Three Injector Manifold 3 1¼ 32 4¼ 108
85780-4 Four Injector Manifold 4 2½ 63 5½ 140
85780-5 Five Injector Manifold 5 3¾ 95 6¾ 171
85780-6 Six Injector Manifold 6 5 127 8 203
85781 Replacement for manifold injectors
85782 Single injector/no manifold (⅜" NPTF(M) inlet)

Spectrum Adjustment Sleeves:

Notes:
Model Number Output Ratio from Ratio from Sleeve 1. Injector manifolds have 13/32" (10.3
(10/bag only) in³ (cc) Maximum Output Minimum Output Color mm) dia.mounting holes for 3/8" bolt.
N/A 0.015 (0.25) 0.05 1 NA 2. Injectors have polyurethane seals
85785-1 0.030 (0.50) 0.10 2 red Check compatibility with synthetic
lubricants.
85785-2 0.045 (0.75) 0.15 3 silver 3. Injector rated for 180°F (80°C) max.
85785-3 0.060 (1.00) 0.20 4 gold ambient temperature, depending on
85785-4 0.075 (1.25) 0.25 5 green lubricant used.
85785-5 0.113 (1.88) 0.37 7.5 black 4. Injectors include fitting for filling
feedlines via alternate outlet port.
85785-6 0.150 (2.50) 0.50 10 purple
5. Output with adjustment screw
85785-7 0.188 (3.13) 0.62 12.5 blue handtightened is .015 cu. in.
85785-8 0.225 (3.75) 0.75 15 orange Maximum output is achieved with
85785-9 0.263 (4.38) 0.87 17.5 brown 20½ turns at .014 cu. in./turn.
85785-10 0.300 (5.00) 1.00 20 yellow

8
Centro-Matic® Automated Lubrication Systems
Grease Injectors

Series SL-1

• For single-line, high-pressure central lubrication system.

• For dispensing lubricants compatible with Viton® packings and viscosity up to NLGI No. 2 (refer to Design Guide).
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of injectors SL-32, SL-33, SL-V, SL-V XL and/or SL-11.
• Individual injectors can be easily removed for inspection or replacement.
• Available in stainless steel SAE 316, for application where environmental conditions are hazardous to carbon steel or
in industries preferring stainless steel.

Specifications:
Output Operating Pressure Connections
Series
Min. Max. Min. Max. Typical Vent Manifold Inlet Injector Outlet
.008 cu. in. .080 cu. in. 1850 psig 3500 psig 2500 psig 600 psig
SL-1 ⅜" NPTF (F) ⅛" NPTF (F)
.131 cc 1.31 cc 127 bar 241 bar 172 bar 41 bar

Model Number of Dimensions

Carbon Steel Stainless Steel 316) Outlets A in. A .mm. B in. B mm
81770-1 239351* One Injector Manifold 1 2½ 63
Single Mounting Hole
81770-2 239352* Two Injector Manifold 2 3 76
81770-3 239353* Three Injector Manifold 3 1¹⁄₄ 32 4¹⁄₄ 108
81770-4 239354* Four Injector Manifold 4 2½ 63 5½ 140
81770-5 239355* Five Injector Manifold 5 3³⁄₄ 95 6³⁄₄ 171
81770-6 — 6 5 23 8 203
81713 — Single injector/no manifold, [ ⅜" NPTF (M) inlet]
81713A 84776* Injector Replacement for manifolded injectors
* For complete assembly, you must order stainless steel manifold and corresponding quantity of Model #84776 Injectors separately.

Notes:
1. Injector manifolds have 13/32" (10.3mm) dia.mounting holes for 3/8" bolt.
2. Injectors have Viton® packings. Check compatibility with synthetic lubricants.
3. Injector rated for 350°F (176°C) max. ambient temperature, depending on lubricant used.
4. Injectors include fitting for filling feedlines via alternate outlet port.
5. Output with adjustment screw hand-tightened is .009 cu. in. Maximum output is achieved with eight turns at .009 cu. in./turn.

9
Centro-Matic® Automated Lubrication Systems
Grease Injectors

Series SL-11

• For single-line, high-pressure central lubrication system.

• For dispensing lubricants compatible with Viton® packings and viscosity up to NLGI No. 2 (refer to Design Guide).
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of injectors SL-32, SL-33, SL-V, SL-V XL and/or SL-1.
• Available only as single unit with ½" NPTF Female inlet.

Specifications:
Series Output Operating Pressure
Min. Max. Min. Max. Typical Vent
.050 cu. in. .500 cu. in. 1000 psig 3500 psig 2500 psig 800 psig
SL-11
.82 cc 8.2 cc 69 bar 241 bar 172 bar 55 bar

Connections
Carbon Steel Number of Outlets
Inlet Outlet
85497 1 ½" NPTF (F) ¹⁄₄" NPTF (F)

Notes:
1. Injectors have Viton® packings. Check packing compatibility with synthetic lubricants.
2. Injector rated for 350°F (176°C) max. ambient temperature.
3. Injectors supplied with fitting for filling feed line via alternate outlet port.
4. Output with adjustment screw hand-tightened is .05 cu. in. Maximum output is achieved with 11½ turns at .040 cu. in./turn.

10
Centro-Matic® Automated Lubrication Systems
Oil Injectors

Series SL-42

• For single-line central lubrication system.

• For dispensing fluid or semi-fluid lubricants.
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of injectors SL-43, SL-41 and/or SL-44.
• Individual injectors can be easily removed for inspection or replacement.
• Carbon steel injectors with Nitrile or Viton® packings.
• Injectors with Viton® packings are used for heat resistant applications or when lubricant to be dispensed requires
Viton® packings for compatibility (indicated by black adjustment caps).
Specifications:
Output Operating Pressure
Series
Min. Max. Min. Max. Typical Vent
.001 cu. in. .003 cu. in. 750 psig 1000 psig 850 psig 150 psig
SL-42
.016 cc .049 cc 52 bar 69 bar 59 bar 10 bar

Model Connections Dimensions

Number of
Outlets Manifold/Injector Injector
Standard Heat Resistant A in. A .mm. B in. B mm
Inlet Outlet
83311-1 84428-1 1 1⅛ 29 1⁵⁄₈ 41
83311-2 84428-2 2 1⅞ 48 2⅜ 60
83311-3 84428-3 3 2⁵⁄₈ 67 3⅛ 79
83311-4 84428-4 4 3⅜ 86 3⁷⁄₈ 98
⅛" NPTF (F)
83311-5 84428-5 5 ⅛" O.D. 4⅛ 105 4⁵⁄₈ 117
Tube
83311-6 84428-6 6 Connection 4⅞ 124 5⅜ 137
83311-10 84428-10 10 7⅞ 200 8⅜ 213
83311-15 84428-15 15 11⅞ 295 12⅛ 308
83535 — 1 ⅛" NPTF (M) Single Injector/No Manifold
83313 84048 — — Replacement for Manifold Injectors

Notes:
1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing – 1/8" O.D. as standard.
Other outlet connectors for feed line optional.
2. Injectors with manifolds include two mounting clips and screws.
3. Standard injectors have Nitrile packings (200°F/93°C max.); Heat Resistant injectors have Viton® packings (350°F/176°C max.,
depending on lubricant used) and black adjusting cap. Check packing compatibility with synthetic lubricants.
4. Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with two turns at .001 cu. in./turn.

11
Centro-Matic® Automated Lubrication Systems
Oil Injectors

Series SL-43

• For single-line central lubrication system.

• For dispensing fluids or semi-fluid lubricants.
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of injectors SL-42, SL-41 and/or SL-44.
• Individual injectors can be easily removed for inspection or replacement.
• Carbon steel injectors with Nitrile or Viton® packings.
• Injectors with Viton® packings are used for heat resistant applications or when lubricant to be dispensed requires
Viton® packings for compatibility (indicated by black adjustment caps).

Specifications:
Series Output Operating Pressure
Min. Max. Min. Max. Typical Vent
.001 cu. in. .008 cu. in. 750 psig 1000 psig 850 psig 150 psig
SL-43
.016 cc .131 cc 52 bar 69 bar 59 bar 10 bar

Model
Connections Dimensions
Carbon Steel Number of
Outlets Manifold/ Injector
Standard Heat Resistant A in. A .mm. B in. B mm
Injector Inlet Outlet
83661-1 84429-1 1 1¹⁄₄ 32 1¾ 44
83661-2 84429-2 2 2 51 2½ 63
¹⁄₄" NPTF (F) ⅛" O.D.
83661-3 84429-3 3 Tube 2³⁄₄ 70 3¹⁄₄ 83
Connection
83661-4 84429-4 4 3½ 89 4 102
83660 84110 — — Replacement for Manifold Injectors
Notes:
1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing – 1/8" O.D. as standard.
Other outlet connectors for feed line optional.
2. Injectors with manifolds include two mounting clips and screws.
3. Standard injectors have Nitrile packings (200°F/93°C max.)
4. Heat Resistant injectors have Viton® packings (350°F/176°C max. depending on lubricant used) and Black Adjusting Cap.
5. Check packing compatibility with synthetic lubricants.
6. Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with five turns at .0014 cu. in./turn.

12
Centro-Matic® Automated Lubrication Systems
Oil Injectors

Series SL-41

• SL-41 series injectors are designed for use in high temperature applications up to 350°F (176°C),
depending on lubricant.
• Available installed only in manifolds with ³⁄₈" NPT female inlet.
• Injectors feature a tamper-resistant adjustment screw which does not incorporate a visual indicator.
• May be combined in a circuit of injectors SL-42, SL-43 and SL-44.

Specifications:
Output Operating Pressure
Series
Min. Max. Min. Max. Typical Vent
.008 cu. in. .080 cu. in. 750 psig 1000 psig 850 psig 150 psig
SL-41
.131 cc 1.31 cc 52 bar 69 bar 59 bar 10 bar

Model Connections Dimensions

Number of
Outlets Manifold/ Injector
Carbon Steel A in. A .mm. B in. B mm
Injector Inlet Outlet
82294-1 1 Single Hole Single Hole 2½ 63
82294-2 2 Mounting Mounting 3 76
82294-3 3 ⅜" NPTF (F) ⅛" NPTF (F) 1¼ 32 4¹⁄₄ 108
82294-4 4 2½ 63 5½ 140
82294-5 5 3¾ 95 6¾ 171
82292 Single Injector/No Manifold, [⅜" NPTF (M) Inlet]
82295 — — ⅛" NPTF (F) Replacement for Manifold Injectors

Notes:
1. Injector manifolds have 13/32" (10.3 mm) mounting holes for 3/8" bolt.
2. Output with adjustment screw hand-tightened is .008 cu. in. Maximum output is achieved with 12 turns at .006 cu. in./turn.

13
Centro-Matic® Automated Lubrication Systems
Oil Injectors

Series SL-44

• For single-line central lubrication system.

• For dispensing fluid or semi-fluid lubricants.
• Output is externally adjustable.
• Indicator stem permits visual check of injector operation.
• May be combined in a circuit of injectors SL-43, SL-41 and/or SL-42.
• Individual injectors can be easily removed for inspection or replacement.
• Carbon steel injectors with Viton® packings.

Specifications:
Series Output Operating Pressure
Min. Max. Min. Max. Typical Vent
.008 cu. in. .080 cu. in. 750 psig 1000 psig 850 psig 150 psig
SL-44
.131 cc 1.31 cc 52 bar 69 bar 59 bar 10 bar

Model Connections Dimensions

Number of
Carbon Outlets Injector
Manifold Inlet A in. A .mm. B in. B mm
Steel Outlet
83749-1 1 2¹/₂ 63
Single Hole Mounting
83749-2 2 3 76
83749-3 3 ³/₈" NPTF (F) ¹/₈" NPTF (F) 1¹/₄ 32 4¹/₄ 108
83749-4 4 2¹/₂ 63 5¹/₂ 140
83749-5 5 3³/₄ 95 6³/₄ 171
83748 1 — — Replacement for Manifold Injectors

Notes:
1. Injector manifolds have 13/32" mounting holes for 3/8" bolt.
2. Injectors have Viton® packings. Check packing compatibility with synthetic lubricants.
3. Injectors rated at 350°F (176°C) maximum ambient temperature, depending on lubricant used.
4. Output with adjustment screw hand-tightened is .009 cu. in. Maximum output is achieved with eight turns at .009 cu. in./turn.

14
Centro-Matic® Automated Lubrication Systems
Metric Injectors

Series SL-32, 33 and 42 Metric

SL-32 Series SL-33, 42 Series

With the same proven design as our U.S. standard injectors, the new metric versions of our popular small grease and
oil injectors feature metric ports. Any surface that needs a wrench is metric. It's more convenient for customers in most
of the world, and easier to maintain because there's no need for a second set of wrenches or adapters.
• Offered for international customers.
• Metric ports connect with metric lines without adapters.
• No need for a second set of tools.
• Proven design used in the United States.
• Models for both grease and oil.

Specifications:
Model Connections Dimensions
Outlets
Oil Grease Grease
Inlet Outlet A in. A mm B in. B mm
SL-42 SL-33 SL-32

85352-1 85351-1 1 1⅛ 29 1⅝ 41

85352-2 85351-2 2 1⅞ 48 2⅜ 60

85352-3 85351-3 3 2⅝ 67 3⅛ 79

85352-4 85351-4 4 3⅜ 86 3⅞ 98

85352-5 85351-5 5 6 mm 4⅛ 105 4⅝ 118

⅛ BSPP(F) O.D. Tube
85352-6 85351-6 6 Connection 4⅞ 124 5⅜ 137

85353-1 1 1¼ 32 1¾ 44

85353-2 2 2 51 2½ 64

85353-3 3 2¾ 70 3¼ 83

85353-4 4 3½ 89 4 102

15
Centro-Matic® Automated Lubrication Systems
Injector Accessories

Injector Connector Tube

Permits application of combined discharge of two or more Series SL-V, SL-1,
SL-41 or SL-44 injectors through one feed line. Used where bearing size is
such that multiple injector output is required. Fittings ⅛" NPT male each end.
Carbon steel construction.
Model For Injector Series Connections
81646 SL-V, SL-V XL OR SL1, SL41, SL44 ⅛" NPTF Male
274824 SL-1 to SL-V connection ⅛" NPTF Male

Injector Outlet Adapter

Converts individual injector lubricant outlet when standard ⅛" O.D. tube is not
desired. All adapters are carbon steel unless otherwise noted.
Model For Injector Series Outlet Connections
14988 ⅛" NPTF Female
84200 ¼" O.D. Tube
14991 SL32, SL33, SL42, SL43 ⅛"NPTF Male
249281 4 mm Tube
249282 6 mm Tube

Manual Grease Fitting Adapter

Allows manual lubrication of the machine between normal system cycles.
Carbon steel with Nitrile seals.
Model For Injector Series Outlet Connections
84195 ⅛" O.D. Tube
SL32, SL33, SL42, SL43
84203 ¼" O.D. Tube

Injector Locking Cap

Carbon steel locking caps set injectors to fixed output.
Model For Injector Series Fixed Volume Output
SL32, SL43 .002 in3 / .033 cc
102781
SL33, SL42 .003 in3 / .049 cc

Injector Cover Caps

Injector cover caps are designed to protect the injector from dirt, harmful
liquids and fumes.
Fits Injector Length Diameter
Model Covers Material
Series in. mm in. mm
273088 SL-V 1.5 38.1 .715(ID) 18.2
Polycarbonate
273089 SL-V XL Indicator 2.2 55.9 .715(ID) 18.2
83272 SL1, SL44 Stem 1.5 38.1 .69(ID 17.5
83730 SL11 2.0 50.8 1.125(ID) 28.6
Vinyl
SL32, SL33, Measuring
68483 1.25 31.2 .5(ID) 12.7
SL42, SL43 Chamber
Injector
90537 SL1, SL41, SL44 Aluminum 3.25 82.6 1.19(ID) 30.2
Body

16
Centro-Matic® Automated Lubrication Systems
Injector Accessories

Closure Plugs for Injectors and Manifolds

For use in plugging lubricant outlets of injectors and manifolds.
Model Material Thread Size (in) A in./mm B in./mm Style
* 12698 Carbon Steel 1
⁵⁄₁₆-24 ⁵⁄₁₆ / 7.9 ½/ 12.7
* 12698-9 Stainless Steel

12511 Carbon Steel

⅛ PTF ⁷⁄₁₆ / 11.1
12511-9 ⁷⁄₁₆ / 11.1
Style 1 2
67044 ⅜ NPT ¹³⁄₁₆ / 20.6
Stainless Steel
67007
¼ NPT ³⁄₁₆ / 4.8 ⁵⁄₈ / 15.9
67007-9
* For plugging outlet of series SL-32, SL-33, SL-42, SL-43 injectors.
Style 2

Compression Nuts
Thread B in./ C in./
Model Style Material A in./mm
Size (in) mm mm
66260 Brass
One Piece
66260-9 Stainless Steel
⁵⁄₁₆-24 ⁵⁄₁₆ / 7.9 ½ / 12.7 ⅛ / 3.2
83924 Brass
Two Piece
83924-9 Stainless Steel
66713 One Piece Brass ⁷⁄₁₆-24 ⁷⁄₁₆ / 11.1 ⅝ / 15.9 ¼ / 6.3

Injector-Operated Air Valve

Model For Injector Series Air Inlet Air Outlet
82272 SL-1, SL-44 ⅛" NPTF(F) ⅛" NPTF(F)

Air Lubricant Spray Devices

Use With Air Inlet Lubricant Spray
Model Air Consumption
Series (in) Inlet (in) Outlet
Fixed 3.5 CFM @40 PSI
68421
Nozzle 99 l/min @2.8 bar
Swivel
69456 ¹⁄₄ NPTF ¹⁄₄ NPTF 4.1 CFM @60 PSI
SL1, SL44 Nozzle
Female Female 116 l/min @4.1 bar
Bulkhead
* 68587
Mount
5.2 CFM @80 PSI
147 l/min @5.5 bar
SL32, SL33, ⅛ NPTF Fixed
84204 ⁷⁄₁₆ – 24 Male Throttle Controlled
SL42, SL43 Female Nozzle
* ³⁄₁₆" (4.8 mm) maximum bulkhead thickness.

Metric Outlet Adapters

Adapts injector outlet to 4 or 6 mm tubing.
Conversion Kit Tubing
Material Nut Ferrule
Model No. Size
249281 4 mm Carbon Steel 249277 249271
249282 6 mm Carbon Steel 249274 249273
Assembly comes with one nut and one ferrule.

Feedline Brush
Use to apply lubricant to chains and conveyors. ⅛" NPT(F) inlet, 1" long, ⁵⁄₈"
surface area diameter; aluminum body with nylon bristles.
Model 68874

17
Centro-Matic® Automated Lubrication Systems
P653S Electric Pump

Taking Lincoln’s Pump Performance and Dependability In A Totally New Direction

The fully integrated P653S pump is an example of Lincoln’s commitment to providing innovative, cost-effective
solutions through industry-leading advances in technology. This next-generation, lower-cost pump package can be
fitted with one of four reservoir sizes and easily adapts to many applications.

P653S Pump Features

• Integrated pump supplies lubricant to a single line parallel lubrication system
• Pumps low- and high-viscosity greases including industry standard NLGI grade
2 grease
• Easily interfaces with telematics technology in today’s heavy equipment
• Operating temperature range from -40°F to +158°F (-40°C to +70°C) VDC or 32°F
to 122°F (0°C to 50°C) VAC*
• Neutral switch allows mobile equipment to remain idling with pump power on but the
timer is deactivated – allowing manual lubrication functionality.
Benefits
• Integration of major system components reduces labor and overall costs
• Simplifies lubrication system design
• Installation time is reduced due to the ”plug-and-play” pump design. Simply mount the
pump, connect power and the supply lines and the system is ready for operation.
• Neutral switch ensures lubrication only when the machine is operating – eliminating
wasted grease.
* Appropriate greases apply

INTERNAL COMPONENTS
• Telematics Signaling
Capabilities for Low
Level and System
Available With or Fault Detection
Without Follower • Pressure Switch or
(shown with follower) Transducer

Reservoir Available in
High-Volume Output Four Sizes –
4, 8, 15 and 20 Liters
Means Versatility in
Scheduling Refilling
Service Intervals

Vent Valve Reservoir Refill Port

Programmable
120/220 AC or 24-DC Pump Controller

18
Centro-Matic® Automated Lubrication Systems
P653S Electric Pump

P653S Pump Specifications

Electrical data DC Pumps AC Pumps
Incoming voltage: 19 to 31 VDC 100 to 240 VAC
Maximum current: 10 amps 1.7 amps
Frequency: — 47 to 63 hz
Operating temperature: -40°F to +158°F 32°F to 122°F
(-40°C to +70°C) (0°C to 50°C)
Common Electrical Data for DC and AC Pumps
Minimum pause time: 4 min.
Maximum pause time: 59 hrs. 59 min.
Pause time increments: 1 hr. or 1 min.
Maximum pumping time: 12 min.
Pump P653S
Operating pressure with:
Pressure switch: 3,500 psig (240 bar)
Pressure transducer (adj.): 1,400 to 4,600 psig (96 to 317 bar)
End of line pressure switch
and transducer setting: 2,500 psig (172 bar)
Number of outlets: 1
Output: 1.5 in3/min (24.6 cm3/min)
Pump Elements
Piston diameter: 7 mm
Number of pumping elements
(connected together): 3
Available Pump Models
NOTE: All models are designed for grease and include stirring paddle and low-level detection. Pumps include remote signaling cable, relief valve,
electrical connectors and external pressure switch or transducer (as indicated for each model).

120/230 Internal Internal Internal & End- Internal & End-

Reservoir Follower
Part No. 24 VDC VAC Pressure Pressure of-Line Pressure of-Line Pressure
Size (L) Plate
50/60 Hz Switch Transducer Switch Transducer
80086 X 4 X
80087 X 4 X
80105 X 4 X
80106 X 4 X
80076 X 4 X X
80077 X 4 X X
80109 X 4 X X
80110 X 4 X X
80090 X 8 X
80091 X 8 X
80107 X 8 X
80108 X 8 X
80080 X 8 X X
80081 X 8 X X
80111 X 8 X X
80112 X 8 X X
80082 X 4 X
80083 X 4 X
80084 X 4 X
80085 X 4 X
80072 X 4 X X
80073 X 4 X X
80074 X 4 X X
80075 X 4 X X
80088 X 8 X
80089 X 8 X
80078 X 8 X X
80079 X 8 X X

19
Centro-Matic® Automated Lubrication Systems
P603S Pump

The Path to Cost Reduction

A lack of lubrication can bring your machines and equipment to a screeching halt. Manual lubrication is often awkward
and expensive. Automated lubrication offers an efficient, rational and environmentally friendly solution.
From a few lubrication points to a few thousand – Lincoln offers the complete range of lubrication equipment and
systems for professional lubrication of construction and mining equipment.
Lincoln lubrication systems are based on the principle of grouping lubrication points together that can be serviced from
one supply point. Our modules build upon each other – enabling the system to grow in accordance with our customer's
requirements. This enables us to offer a custom-tailored lubrication solution for individual needs.
P603S Pump Features
Reliable Operation in Harsh Environments
• Wind turbines – especially offshore • Lower costs for repairs and spare parts
• Construction and mining • Exactly matched metering reduces the
• Commercial vehicles cost of lubricant
• Compact and medium-sized machines and • Precise metering reduces the environmental
industrial applications impact. No dripping of “too much” lubricant
• Robust and easy system layout • Improved safety by minimizing slipping
• Simple maintenance – easy to expand • Hard-to-reach points are easily accessible
• SE1 suction elements for used lubricant from a convenient point – which also
• Suitable for quick separating lubricants improves safety
• Increased profits and productivity • Reliable supply of all connected lubrication
• Improved operating times; less costly points. No points are “overlooked”
downtime resulting from improper
lubrication
Incoming metering 0.05 - 0.4 cm³/stroke
Pump Output 12 cm³
Supply voltage 12 VDC, 24 VDC, 100-240 VAC
Visual monitoring (indicator pin) x
Programmable controller x
Reservoir capacity/liter 4, 8, 10, 15, 20
Integrated pressure sensor and vent x
Visual low-level x
Compatible with SE1 suction elements x
Available Pump Models
Model No. Description Power Size Follower Transducer
645-41064-3 P603S- 4XLF -3Z7-AC-2A7.16-S13-SE AC 4L X X
645-41062-3 P603S- 8XLF -3Z7-AC-2A7.16-S13-SE AC 8L X X
645-41110-2 P603S- 8XLBO-3Z7-AC-3A7.16-S12-SE AC 8L X
645-41062-4 P603S- 8XLBO-3Z7-AC-3A7.16-S19-SE AC 8L X
645-41073-5 P603S-15XLF -3Z7-AC-2A7.16-S13-SE AC 15L X X
645-41064-8 P603S- 4XLF1-3Z7-12-1A7.16-S01-SE 12 DC 4L X (Bayonett) X
645-41064-7 P603S- 4XNBO-3Z7-12-2A7.16-S01-SE 12 DC 4L X
645-41110-3 P603S- 8XLF1-3Z7-12-1A7.16-S01-SE 12 DC 8L X (Bayonett) X
645-41062-9 P603S- 8XLF -3Z7-24-1A7.16-S01-SE 24 DC 8L X X
645-41064-4 P603S- 4XLBO-3Z7-24-1A7.16-S17-SE 24 DC 4L X
645-41064-6 P603S- 4XLF -3Z7-24-1A7.16-S13-SE 24 DC 4L X X
645-41064-2 P603S- 4XNBO-3Z7-24-1A7.16-S01-SE 24 DC 4L X
645-41062-8 P603S- 8XLBO-3Z7-24-2A7.16-S19-SE 24 DC 8L X
645-41062-9 P603S- 8XLF -3Z7-24-1A7.16-S01-SE 24 DC 8L X X
645-41062-7 P603S- 8XLF -3Z7-24-1A7.16-S03-SE 24 DC 8L X X
645-41119-1 P603S-10XLF -3Z7-24-1A7.16-S13-SE 24 DC 10L X X

20
Centro-Matic® Automated Lubrication Systems
P603S Pump

Pump and Accessories – All-In-One

The pump with integrated controller is easy to install. The all-in-one design of the pump
includes the programmable controller, a pressure switch/transducer and a vent valve.
Simple System Design – Easy to Expand
The single-line system’s design and layout is uncomplicated, making it easy to install and
operate. A single mainline reduces material and installation costs.
Easy to Service
It is quick and easy to exchange out an injector. The mainline or neighboring injectors do
not have to be removed. The exchange can be performed between lubrication cycles so
that there is no wasted lubricant or excessive costly downtime.
Additional Pressure Switch
An additional pressure switch at the end of larger systems can be used for added pressure
control to ensure correct lubrication.
Special Features for Wind Turbine Applications – Also for Off-Shore Systems
Lincoln single-line systems completely vent during the pause interval. As a result, they are
suitable for fast separating lubricants.
For rotating operation in wind turbines, the reservoir is equipped with a follower plate
and stirring paddle – which also facilitates the usage of fast separating lubricants. For
stationary operation a stirring and fixed paddle is sufficient.

Pump Specifications
P603S 12/24 VDC P603S / AC
Pump Output 0.73 cu.in/min (12cm³/min) 0.73 cu.in/min (12cm³/min)
Maximum Working Pressure 4,350 psig (300 bar) / 3,480 psig (240bar) 4,350 psig (300 bar) / 3,480 psig (240bar)
Maximum Current Draw 2 amps 2 amps
Steering Paddle And Follower yes yes
Reservoir Size, Liter 4, 8, 10, 15 and 20 4, 8, 10, 15 and 20
Number Of Pumping Elements 3, (seven millimeter dia.) 3, (seven millimeter dia.)
RPM, Paddle (76˚F) 18 18
Pressure Switch At Pump yes yes
Transducer At Pump yes yes
Pressure Switch/ End Of Line yes yes
Transducer/ End Of Line yes yes
PCB yes yes
Separate Alarms, LL/Proxy Switch no no
24.0 VDC Input yes yes
Switching Power Supply no yes
Connectors Bayonet style Bayonet style + square type (AC)
Data Logger no no
Remotely Change Lube Frequency yes yes
Count Control yes yes
Ignition & Neutral Switch yes yes
Acknowledging Fault at pump/external at pump/external
Manually Lub Switch, External yes yes
Pump On LED, External yes yes
Protection IP 6K9K IP 6K9K
Temperature -40°C / +70°C -40°C / +70°C

21
Centro-Matic® Automated Lubrication Systems
Manual Grease Pumps

Once you have determined your total lubricant requirements, your greatest line length and compensated for line expansion, you’re
ready to determine the pump you need.
If your overall requirements are less than 2.4 cu. in. for oil or 2.15 cu. in. for grease, you can select a single stroke pump. Should
your requirements demand more capacity, a reciprocating pump will fill the need.
Your Lincoln representative will suggest the best pump for you based on your application. Look over the following pages of pump
selection options and feel free to ask questions.

Model 83817 Economy Grease Pump

Manual pump has metal reservoir and spring-loaded follower. Indicator pin in pump
base shows when 2500 psi system operating pressure has been achieved.

Model: 83817
Output/Stroke: .100 cu. in. / 1.6 cc
Reservoir Capacity: 1 lb. 30 cu. in. / .45 kg 492 cc
Lube Outlet: ¹/₈" NPTF (F)

Typical System Min. 1200 psig / 82 bar

Operating Pressure: Max. 3500 psig / 241 bar
in. 15¼" x 5 "x 5⅝"
Dimensions (HxWxL):
mm 387 x 127 x 141 mm
Filling Method: 14.6 oz. Grease Cartridge/Bulk Fill

Model 1810 Grease Pump

Translucent reservoir with spring-loaded follower. Indicator pin in pump base
shows when 2500 psi system operating pressure has been achieved. Refill through
included fitting using Model 81834 filler pump or other manual pump equipped with
Model 645006 coupler.

Model: 1810
Output/Stroke: .160 cu. in. / 2.6 cc
Reservoir Capacity: 5 lb. 150 cu. in./ 2.27 kg 2458.50 cc
Lube Outlet: ¼" NPTF (F)

Typical System Min. 1200 psig / 82 bar

Operating Pressure: Max. 3500 psig / 241 bar
in. 16¹/₄" x 7¹/₈ "x 7³/₄"
Dimensions (HxWxL):
mm 413 x 181 x 197 mm
Filling Method: 81834 Filler Pump

22
Centro-Matic® Automated Lubrication Systems
Air-Operated (Single Stroke) Grease Pumps

Centro-Matic® Integrated Pumps

All models are air-operated, positive displacement pumps delivering a maximum volume by means of a single stroke
of the pump (volumes listed below). Solenoid air valves and adjustable solid-state time controls are integrated into
the pump body. All pumps are designed to deliver grease to single-line injectors and include a special high-volume
refill fitting. Acrylic reservoirs are available in several sizes. Integrated controls feature LED indicators for “Power On”,
“Pump On” and “Alarm,” along with a membrane-type, “Manual Lube” switch.

Model 85434 Integrated Grease Pump

Ratio: 31:1
Power: 120 VAC

Typical System Min. 1200 psig / 82 bar

Operating Pressure: Max. 3500 psig / 240 bar
Maximum Output: 1.4 in³ / 18.7 cm³
Reservoir Capacity: 4.5 lbs. / 1.8 kg
Dimensions (LxWxH): 24.70" x 6.52" x 18.11" / 627 x 166 x 460 mm
Model 85434

Model 85435 Integrated Grease Pump

Same as Model 85434 except 240 VAC.

Model 85436 Integrated Grease Pump

Same as Model 85434 except with a Ratio of 25:1 and Maximum Output of
2.15 in³ (35.2 cm³).

Model 85442 Integrated Grease Pump

Ratio: 20:1
Power: 120 VAC

Typical System Min. 1200 psig / 82 bar

Operating Pressure: Max. 3500 psig / 240 bar
Maximum Output: 0.45 in³ / 7.4 cm³
Reservoir Capacity: 1 lb. / 0.450 kg
Dimensions (LxWxH): 5.25" x 7.24" x 12.02" / 133 x 184 x 305 mm

Model 85442
Model 85444 Integrated Grease Pump
Ratio: 20:1
Power: 120 VAC

Typical System Min. 1200 psig / 82 bar

Operating Pressure: Max. 3500 psig / 240 bar

Maximum Output: 0.45 in³ / 7.4 cm³

Reservoir Capacity: 4 lbs. / 1.8 kg

Dimensions (LxWxH): 5.25" x 7.24" x 20.75" / 133 x 184 x 527 mm

Model 85445 Integrated Grease Pump

Same as Model 85444 except 240 VAC.

Timer and Controller Specifications

On Off Alarm Operating
Time Time Contacts Temperature
10 sec 1/2 to 30 min 8 amps -10°F to 150°F
Model 85444
or 30 sec or 30 min to 30 hrs @ 250 VAC -23°C to 65°C

23
Centro-Matic® Automated Lubrication Systems
Air-Operated (Single Stroke) Grease Pumps

Model 82886 Pump

Pump discharges lubricant on air-powered forward stroke and vents on
springpowered return stroke through built-in check/vent valve. Reservoir is
translucent with spring-loaded follower. Includes filler fitting for refilling reservoir
with Model 81834 or other manual pump equipped with Model 645006 coupler.

Model 83668
Same as Model 82886 except includes larger reservoir.

Model 82886
Model 82653 Bare Pump
Pump uses air for forward and return stroke but dispenses lubricant on forward
stroke only. Return stroke vents lubricant pressure through included check/vent
valve. Translucent reservoir has spring-loaded follower. Refill through included
filler fitting using Model 81834 or other manual pump equipped with Model 645006
coupler.

Model 83834 High Volume Bare Pump

Same as Model 82653 except 25:1 ratio, 2.15 cu. in (35.2 cc) maximum output.
Model 83668
Model 82655 Pump with Controls
Same as Model 82653 except includes Model 84501 solid state timer and 350244
four way electric solenoid valve.

Model 83800 High Volume Pump with Controls

Same as Model 83834 except includes Model 84501 solid state timer and 350244
four way electric solenoid valve.
Model 82653

Reservoir Lubricant Oper.

Lubricant/ Max. Reservoir Air Lube Pressure Dimensions Air Valve
Model Temp.
Air Ratio Output Capacity Inlet Outlet HxWxL Required
Range Min. Max.
10⅜"x5¹⁄₄"x6 /
82886 1 lb/.45 kg
.45 in³ / 263x133x152mm
20:1 30 in³/492 3-way
7.4 cm³ 18½"x5¹⁄₄"x6 /
83668 cm³ 0°F to
1200 3500 470x133x152mm
150°F / ¼" ¼"
82653 psig / 82 psig /
1.4 in³ / -18°C to NPTF(F) NPTF(F)
31:1 bar 240 bar
82655 22.9 cm³ 4 lb/1.81 65°C
18½"x5¾"x21 /
kg 120 in³ / 4-way
83834 470x146x533mm
2.15 in³ / 1967 cm³
25:1
83800 35.2 cm³

Note:
Air consumption @ 100 psi is .15 CFM per stroke.

Timer Specifications
Cycle Time On Time Power Ambient Operating
Min Max Min Max Requirements Temp. Range
1 Min. 120 VAC, 60 hz 10°F to +150°F
20 Sec. 24 Hr. 10 Sec.
24 Sec. 110 VAC, 50 hz -23°C +65°C
Note:
Refer to System Controls section for detailed timer and solenoid operated air valve
specifications.

24
Centro-Matic® Automated Lubrication Systems
Air–Operated (Reciprocating) Grease Pumps

Model 83167
Includes transparent reservoir, spring-loaded follower, vent valve assembly and
filler fitting for refilling of reservoir with 81834 filler pump or other manual pump
equipped with Model 645006 coupler.

Model: 83167
Lubricant/Air Ratio: 40:1
Output/Min @ 100 PSIG Air: 12 cu. in. 197 cc
Reservoir Capacity: 12 lb. / 5.44 kg / 360 cu. in. / 5900 cc
Air Inlet: ¹⁄₈" NPTF (F)
Lube Outlet: ¹⁄₈" NPTF (F)

Typical System Min. 1200 psig / 82 bar

Operating Pressure: Max 3500 psig / 241 bar
Dimensions (HxWxL): 22¹⁄₂" x 9 "x 16¹⁄₄" 572 x 229 x 413 mm
Filling Method: 81834 Filler Pump
Reservoir: Translucent Acrylic
Notes: 1. Pump requires 3-way air valve. 2. Air consumption @ 100 psi is .15 CFM per cycle

Model 83599
Same as Model 83167 except includes base mounting kit and metal reservoir with
indicator rod for visual check of grease level. Reservoir includes springloaded
follower.

Model: 83599
Lubricant/Air Ratio: 40:1
Output/Min @ 100 PSIG Air: 12 cu. in. / 197 cc
Reservoir Capacity: 12 lb. / 5.44 kg 360 cu. in. / 5900 cc
Air Inlet: ¹⁄₄" NPTF (F)
Lube Outlet: ³⁄₄" NPTF (F)

Typical System Min. 1200 psig 82 bar

Operating Pressure: Max. 3500 psig 241 bar
Dimensions (HxWxL): 24³⁄₈" x 9 "x 18³⁄₁₆" 619 x 229 x 462 mm
Filling Method: 81834 Filler Pump
Reservoir: Aluminum
Notes: 1. Pump requires 3-way air valve. 2. Air consumption @ 100 psi is .15 CFM per cycle

25
Centro-Matic® Automated Lubrication Systems
Air–Operated (Reciprocating) Grease Pumps

Model 1823
Includes 2½" air motor driven pump, vent valve assembly, pump elevator,
connecting lubricant and air hoses, and control panel.

Model: 1823
Lubricant/Air Ratio: 50:1
Output/Min @ 100 PSIG Air: 30 cu. in. / 492 cc
Drum Size: U.S. standard 120 lb. refinery drum
Air Inlet: ⅜" NPTF (F)
Lube Outlet: ¾" NPTF (F)

Typical System Min. 1200 psig / 82 bar

Operating Pressure: Max. 3500 psig / 241 bar
Pump & Vent Assembly 282288
Components included: Controller 85209
Pump Elevator 83447
Controller Electrical
120V, 60 Hz., 110 V, 50hz
Requirements:
Notes: 1. Air consumption @ 100 psi is .42 CFM per cycle.
2. Model 83371 follower plate is available as an optional accessory.

Model 282288
Same specifications as Model 1823 but does not include elevator or controller.

Model 1827 Heavy-Duty Unit

Consists of PowerMaster pump, vent valve assembly with air and lubricant
connecting hoses, drum cover and control panel.

Model: 1827
Lubricant/Air Ratio: 75:1
Output/Min @ 100 PSIG Air: 161 cu. in. / 2638 cc
Drum Size: U.S. standard 400 lb. refinery drum
Air Inlet: ⅜" NPTF (F)
Lube Outlet: ⅜" NPTF (F)

Typical System Min. 1200 psig / 82 bar

Operating Pressure: Max. 3500 psig / 241 bar
Basic Pump 2004
Vent Valve 85215
Components included: Controller 85209
Drum Cover 81675

Model 1828
Same as Model 1827 except includes Model 2008 pump, 85218 vent valve and
Model 84034 drum cover sized for U.S. standard 120 lb. refinery drum. Includes
85209 controller.

Model 1829
Same as Model 1827 except includes Model 2010 pump (50:1 ratio, 231 cu.in./
min. (3785 cc) delivery at 100 psig air). Fits U.S. standard 400 lb. refinery drum.
Includes 85209 controller and 85215 vent valve.

26
Centro-Matic® Automated Lubrication Systems
Electric Grease Pumps / Manually Operated Oil Pump

Model 1849
Fully automatic assembly including pump, 220/440 volt motor, translucent
reservoir with spring-loaded follower, 4000 psi (276 bar) safety unloader,
adjustable pressure switch and time control. Time control is adjustable for
lubrication cycle frequency of 5, 10, 15, 20, 30 or 60 minutes. Solid state time
delay relay (35 sec. to 240 sec.) included for connection of audible or visual alarm
to signal lubrication failure due to empty reservoir or broken supply line.
Model: 1849*
Output Min: 18 cu. in. / 295 cc
Reservoir Capacity: 12 lb. / 5.44 kg / 360 cu. in. / 5900 cc
Lube Outlet: ¼" NPTF (F)
Electrical Pump Motor 220/440 VAC, 60 Hz, 3 ph
Specifications: Controller 115 VAC, 60 Hz
Typical System Min. 1200 psig / 82 bar
Operating Pressure: Max. 3500 psig / 241 bar
Dimensions (HxWxL): 25⅜" x 13 "x 19¹³⁄₁₆" / 645 x 330 x 503 mm
81834 Filler Pump or Manual Pump and
Reservoir Fill Method: 645006 Coupler
* See Model 85520 in Systems Control section for controller specifications.

Model 1835
Same as Model 1849 except has 115 VAC, 60 Hz motor and controller.
Model 1833
Similar to Model 1849 except: 24 VDC pump motor and controller; metal reservoir
with visual level indicator rod; 2.5, 5, 10, 20, 40 and 80 minute cycle frequency
adjustment; 60 second fixed on time and alarm relay features. Incorporates
pressure switch factory set at 2500 psi (172 bar).
Model: 1833
Output/Min: 18 cu. in. / 295 cc
Reservoir Capacity: 12 lb. / 5.44 kg / 360 cu. in. / 5900 cc
Lube Outlet: ¼" NPTF (F)
Electrical Pump Motor ¼ HP, 24 VD, 10 AMP
Specifications: Controller 24 VDC, 5 watts
Typical System Min. 1200 psig / 82 bar
Operating Pressure: Max. 3500 psig / 241 bar
34¼" x 11½"x 21¾"
Dimensions (HxWxL): 870 x 292 x 552 mm
81834 Filler Pump or Manual Pump with 645006
Reservoir Fill Method: Coupler
Notes:
1. Controller has provision for remote manual lube button and remote lube failure alarm.
2. Enclosure is designed to meet NEMA 3S and 12 specifications.

Manually Operated Oil

Model 1812
Pump has translucent reservoir with filler cap and strainer. Pump base has built-in check/
vent valve and an indicator pin to show when system pressure is achieved.
Model: 1812
Output/Stroke: .160 cu. in. / 2.6 cc
4¹⁄₂ pint / 130 cu. in.
Reservoir Capacity: 2.13 liter/2130 cc
Lube Outlet: ¹⁄₄" NPTF (F)
Typical System Min. 750 psig / 52 bar
Operating Pressure: Max. 1000 psig / 69 bar
Dimensions (HxWxL): 16³⁄₄" x 7¹⁄₈"x 7³⁄₄" / 425 x 181 x 197 mm

27
Centro-Matic® Automated Lubrication Systems
Air–Operated (Single Stroke) Oil Pumps

Centro-Matic® Integrated Pumps

All models are air-operated, positive displacement pumps delivering a maximum volume by means of a single stroke of the
pump (volumes listed below). Solenoid air valves and adjustable solid-state time controls are integrated into the pump body.
All pumps are designed to deliver fluid lubricants to single-line injectors and are filled via a spring-loaded filler cap and internal
filter. Acrylic reservoirs are available in several sizes. Pump Models 85432 and 85433 do not include a reservoir,and are
designed for remote or bulk-fill oil applications (80 psi/5.4 bar maximum head pressure). Integrated controls feature LED
indicators for “Power On”, “Pump On” and “Alarm,” along with a membrane-type, “Manual Lube” switch.

Model 85430 Integrated Fluid Pump

Ratio: 20:1
Power: 120 VAC
Typical System Min. 750 psig / 52 bar
Operating Pressure: Max. 1000 psig / 69 bar
Model 85430 Maximum Output: 2.4 in³ / 39.3 cm³
Reservoir Capacity: 4.5 pints / 2.1 liters
Dimensions (LxWxH): 24.70" x 6.52" x 18.11" / 627 x 166 x 460 mm

Model 85431 Integrated Fluid Pump

Same as Model 85430 except 240 VAC.
Model 85432 Integrated Fluid Pump
Same as Model 85430 except without reservoir.
Model 85433 Integrated Fluid Pump
Same as Model 85432 except 240 VAC.
Model 85432
Model 85438 Integrated Fluid Pump
Ratio: 20:1
Power: 120 VAC
Typical System Min. 750 psig / 52 bar
Operating Pressure: Max. 1000 psig / 69 bar
Maximum Output: 0.45 in³ / 7.4 cm³
Reservoir Capacity: 1.25 pints / 0.6 liters
Dimensions (LxWxH): 5.25" x 7.24" x 12.02" / 133 x 184 x 305 mm

Model 85440 Integrated Fluid Pump

Ratio: 20:1
Model 85438 Power: 120 VAC
Typical System Min. 750 psig / 52 bar
Operating Pressure: Max. 1000 psig / 69 bar
Maximum Output: 0.45 in³ / 7.4 cm³
Reservoir Capacity: 4.25 pints / 2.0 liters
Dimensions (LxWxH): 5.25" x 7.24" x 20.75" / 133 x 184 x 527 mm

Model 85441 Integrated Fluid Pump

Same as Model 85440 except 240 VAC.

Timer and Controller Specifications

On Off Alarm Operating
Time Time Contacts Temperature
10 sec 1/2 to 30 min 8 amps -10°F to 150°F
or 30 sec or 30 min to 30 hrs @ 250 VAC -23°C to 65°C
Model 85440

28
Centro-Matic® Automated Lubrication Systems
Air–Operated (Single Stroke) Oil Pumps

Model 82885
Pump discharges lubricant on air-powered forward stroke and vents on spring-
powered return stroke through built-in check/vent valve. Translucent reservoir
is refilled through filler cap with strainer.

Model 83667
Same as Model 82885 except includes larger reservoir

Model 82570
Model 82885
High-volume pump discharges lubricant on air-powered forward stroke and vents
through included check/vent valve on air-powered return stroke. Translucent reservoir
is refilled through filler cap with strainer.

Model 82573
Air-operated, single stroke oil pump and timer assembly. Same as Model 82570
except includes Model 84501 solid state timer and 350244 four-way electrical
solenoid valve. Power requirements: 120 VAC, 60 Hz; 110 VAC, 50 Hz.
Model 83667

Model 82676
Same as Model 82570 except for use with external oil supply through ½" NPT(F) oil
inlet (maximum head pressure 80 psi (5.5 bar)).

Model 82676

Lubricant Oper.
Metric Lubricant/ Max. Reservoir Air Lube Press. Dimensions Air Valve
Model
Equiv. Air Ratio Output Capacity Inlet Outlet HxWxL Required
Min. Max
1¹/₄ pint/.6 liter 36 10³/₈"x5¼"x6"
82885 85391
.45 in³ in³/600cm³ 263x133x152mm
3-way
7.4 cm³ 18¹/₂"x5¹/₂"x6"
83667
470x140x152mm
1000
4¹/₂ pint / 2 liter ¹/₄” ¹/₄” 750 psig 17³/₄"x5³/₄"x18¹/₄"
82570 20:1 psig
123 in³ / 2000 cm³ NPTF(F) NPTF(F) 52 bar 451x146x464mm
69 bar
2.4 in³ 17³/₄"x5³/₄"x18¹/₄"
82573 4-way
39.3 cm³ 451x146x464mm
18¹/₂"x5³/₄"x21"
82676 Remote
470x146x533mm
** Air consumption @ 100 psi is .15 CFM per stroke.
Check compatibility when using synthetic oils.

Timer Specifications for Model 82573 Only

Cycle Time On Time
Min Max Min. Max.
20 Sec. 1000 psig 69 bar 750 psig 52 bar 1 Min. 24 Sec.
Note:
Refer to System Controls section for detailed timer and solenoid-operated air valve specifications.

29
Centro-Matic® Automated Lubrication Systems
Air–Operated (Reciprocating) Oil Pumps

Model 283167
Includes 2½" air motor driven pump, vent valve assembly, translucent reservoir with
filler cap and strainer and 1200 psi (82 bar) safety unloader.
Model: 283167
Lubricant/Air Ratio: 40:1
Output/Min @ 100 PSI Air: 12 cu. in. / 197 cc
15 pint / 7.1 liter
Reservoir Capacity: 433 cu. in. / 7100 cc
Air Inlet: ⅛" NPTF (F)
Lube Outlet: ¾" NPTF (F)
Typical System Min. 750 psig / 52 bar
Operating Pressure: Max. 1000 psig / 69 bar
Dimensions (HxWxL): 23¼" x 9" x 16¼" / 591 x 229 x 413 mm
Air Valve Required: 3-Way**
** Air consumption @ 100 psi is .15 CFM per stroke.
Note: Check compatibility when using synthetic oils.

Model 1826
Consists of Model 2002 PowerMaster pump, Model 85217 vent valve assembly, Model
81675 drum cover, Model 85209 controller, air and lubricant connecting hoses and
1200 psi (82 bar) safety unloader.
Model: 1826
Lubricant/Air Ratio: 24:1
Output @ 75 Cycles/Min: 462 cu. in. / 7571 cc
Drum Size: U.S. standard 55-gal. refinery drum (removable head)
Air Inlet: ⅜" NPTF (F)
Lube Outlet: ¾" NPTF (F)
Typical System Min. 750 psig / 52 bar
Operating Pressure: Max. 1000 psig / 69 bar
Controller Electrical
120 V 60 Hz, 110V 50 Hz
Requirements:
Notes:
1. See System Controls section for detailed controller specifications.
2. See Industrial Pumping catalog for basic pump specification, including air consumption.

Electric–Operated Oil Pump

Model 1848
Fully automatic assembly including pump, 220-/440-volt motor, translucent reservoir,
1200 psi (82 bar) safety unloader, adjustable pressure switch and time control. Time
control is adjustable for lubrication cycle frequency of 5, 10, 15, 20, 30 or 60 minutes.
Solid state time delay relay (35 sec. to 240 sec.) included for connection of audible or
visual alarm to signal lubrication failure due to empty reservoir or broken supply line.
Model: 1848
Output/Min: 18 cu. in. / 295 cc
14.7 pint / 6.96 liter
Reservoir Capacity: 424 cu. in. / 6960cc
Lube Outlet: ¼" NPTF (F)
Electrical Pump Motor 220/440 VAC, 60 Hz, 3 ph
Specifications: Controller Max 115 VAC, 60 Hz
Typical System Min. 750 psig / 52 bar
Operating Pressure: Max. 1000 psig / 69 bar
Dimensions (HxWxL): 25⅜" x 13" x 19¹³⁄₁₆" / 645 x 330 x 503 mm
Note: See Model 85520, System Controls section for controller specifications.

30
Centro-Matic® Automated Lubrication Systems
Bucket Pumps
Lincoln offers 60, 90 or 120 lb. reservoirs for our bucket pumps. Here are the features:
• Rugged 14-gauge steel walls
• Large ¾" NPT inlet for fast filling
• Wiper on follower plate that reduces lubricant waste
• Special coupling for easy pump removal when servicing
• Thick mounting ring that withstands severe vibration
These buckets work with hydraulic, air and electric pumps.

Enhanced low-level
indicator eliminates Eight bolts to resist
false low level signals lid loosening
Special coupling to
easily remove the pump Weld nuts for easy lid
from the vent valve removal
before servicing
14-gauge steel wall
Thick rubber seal to keep reduces denting and
contaminants out follower plate hang-up
Aircraft cable to strengthen
connection between Tube to center of reservoir
low-level and follower plate to prevent cocking

Wiper on follower plate Large 3⁄4"NPT fill inlet

to better wipe off the for faster filling
grease from the sides Thick mounting ring with
twice as many mounting
Stop bolts on holes to resist loosening
follower plate to
prevent cocking

Model 84050
A 50:1 ratio double acting air-operated pump for high-volume displacement. Supplied
with a 60-pound capacity metal reservoir with removable cover for easy filling. Includes
air-operated vent valve and 5' (1.5m) air and lubricant connecting hoses.
Model: 84050
Lubricant/Air Ratio: 50:1
Output/Min @ 100 PSIG Air: 30 cu. in. / 492 cc
Reservoir Capacity: 60 lb. / 27 kg , 1800 cu. in. / 29,500 cc
Air Inlet: ⅜" NPTF (F)
Lube Outlet: ¾" NPTF (M) at Hose

Typical System Min. 1200 psig / 82 bar

Operating Pressure: Max. 3500 psig / 241 bar
Dimensions (HxWxL): 31¾" x 15⁷⁄₁₆" x 15⁹⁄₁₆" / 806 x 392 x 395 mm
Filling Method: Bulk
Reservoir: Steel
Notes: 1. Pump requires 3-way air valve.
2. Air consumption @ 100 psi is .42 CFM per cycle
3. Optional Model 92597 follower available.

Model 85460
Same as Model 84050 except includes installed visual low level and follower plate
assembly.

31
Centro-Matic® Automated Lubrication Systems
FlowMaster®Hydraulic Pump
High-performance FlowMaster hydraulic pumps combine rotary-driven pump motors with
reciprocating pump tubes and flexible control features that perform in desert heat and
arctic cold. Integrated control manifold adjusts the amount of lubricant and operating
pressure. The pump’s output is adjustable from 7 to 45 cubic inches per minute.
Supply Inlet
Hydraulic Pressure, Max.: 3000 psig 200 bar
Operating Inlet
Hydraulic Pressure: 300 to 420 psig 20 to 32 bar
Hydraulic Inlet Flow: Up to 7 gpm 28 l/min
1/2" Pump Ratio with Manifold: 9:1 at low inlet pressure (300 to 350 psi/20 to 25 bar)
NPT and low inlet flow (below 2 gpm/7 lpm) pump ratio
approaches 11:1 ratio at higher inlet pressure and flow
Pump Output: 7 - 45 in³/min
Operating Temperature: -20° to +150°F -10° to +65°C
Solenoid Valve Coil: 24 VDC
Hydraulic Inlet Port: SAE 4
Tank Return Port: SAE 6
Pump Outlets: ¼" NPTF
3/4" Max. Hydraulic Fluid Temp: 200°F 93°C
NPT
For the complete system, when ordering Pump Only Models
120# or 400# versions also order the
following: Capacity Solenoid Adjustable
Adjustable
Model Manual Pressure
120# Drum Cover 84616 Lbs. gal L Flow Control
Override Control
Follower Assy 85492
Vent Valve Assy 84990 85480 120 18 68
400# Drum Cover 271606 85481 60 8 30
Follower Assy 270982 No Yes Yes
85482 400 55 208
Vent Valve Assy 271605
85483 35 5 19
85676 90 10 38
Yes Fixed Fixed
85678 60 8 30
*Heavy-duty model **Low temperature model (-60°F) ***Kit consisting of pump, follower, bucket cover and hardware

Pump & Bucket Models with follower plate and

low-level detect
Solenoid Adjustable Adjustable
Size
Model Lbs. L Manual Flow Pressure
gal
Override Control Control
85220 * 120 18 68

85487 ** 60 8 30 No Yes Yes

85585 10 38
90
85677 ** 10 38 Yes Fixed Fixed

86258 60 8 30 No Yes Yes

*Includes high-level detect **Does not include follower plate or low-level detect
19.517

Container Pump - in. (mm) Pump Bucket-in. (mm)

Size A B A B
13.69 23.50 14.59 24.40
35 lb.
(348) (597) (371) (620)
19.00 28.81 19.90 29.70
60 lb.
(483) (732) (505) (754)
27.50 37.31 28.40 40.13
90 lb.
(699) (942) (721) (1,019)
27.50 37.31 28.40 40.13
120 lb.
(699) (942) (721) (1,019)
34.00 43.81 34.00 44.94
400 lb.
16.75 for 120# container (864) (1,113) (864) (1,142)
15.090

32
Centro-Matic® Automated Lubrication Systems
FlowMaster® Electric Pumps
It seems too good to be true, but Lincoln’s new Electric FlowMaster Pump can serve all but the largest automated lubrication
applications. Now you can take advantage of the ease and economy of this efficient, versatile electric pump—no cost for air
associated with running the pump and no hydraulic hoses to connect.
The Electric FlowMaster Pump is a workhorse. Because you can adjust the speed of the pump’s motor, you can adjust the
pump’s output to precisely fit any application. Lincoln offers 12 different models.
For manual lubrication, use the pump with a hose reel and a dispensing valve.

24 VDC FlowMaster®
Operating Temperature Range: -40° to +150°F -40° to +65°C
Pump Outlets: ¼" NPTF
Motor: ½" HP PEAK

Pump Only Models

Capacity Maximum Speed Range
Model Power
lbs gal L Pressure Rating RPM
85479 35 5 19 2500 psi (170 bar) 9.5-100
85552 35 5 19
85553 120 18 68
5-50
85554 60 8 30
5000 psi (345 bar
85566 120 18 68 24 DC
85567 60 8 30
36-360
85568 120 18 68
85569 35 5 19 2500 psi (170 bar) 9.5-100
85591 400 55 208 5000 psi (345 bar) 36-360
85582 60 8 30 12 DC 3500 psi (241 bar) 300

Current Draw Output: in³/min

5.84 Model Gear Ratio
Amps Min Max
(148)
85479 * 17.8:1 2-5 0.7 6.3
2.95 85552 34:1
(75) 1-4.2 0.4 3.5
Power 85553 34:1
Speed Control Wires 85554 19:1
Potentiometer 1-6.5 0.7 6.3
85566 19:1
1/4 NPTF 85567 5:1
Pump Outlets 2-15 2.8 25.2
both sides 85568 5:1
85569 17.8:1 2-5 0.7 6.3
8.97 85591
(228) 85582 31 21
* Kit consisting of pump, follower, bucket cover and hardware
6.82
(173)
Pump and Bucket Models
Capacity Maximum Speed Range
Model Power
lbs gal L Pressure Rating RPM
85471 60 8 30
85472 90 10 38 24 DC 5000 psi (345 bar) 36-360
2.26 85473 * 120 18 68
(57)
Current Draw Output: in³/min
Model Gear Ratio
Amps Min Max
24 VDC Electric 85471
85472 5:1 2-15 2.8 25.2
Vent Valve 85473
Above models include follower plate and low-level detect * Includes high-level detect
IP 67 Explosion
274899
Proof Rating Accessories
276325 IP 65 Rating Description 120 lb. 400 lb.
276903 IP 65 Rating Follower plate 85492 270982
Drum cover 85474 85475
Hardware Kit for
276919 Vent valve assembly:
276903
24 VDC 85664 85665
525-32083-1 IP 54 Rating Strainer 272180 272180

33
Centro-Matic® Automated Lubrication Systems
FlowMaster® Electric Pumps

120/230 VAC FlowMaster®

Now you can save the cost of air and plug in our new 120/230 VAC FlowMaster pump.
Convenient and powerful, the 120/230 VAC FlowMaster pump allows you to tap into
your AC power source and pump grease from a 120 lb. or 400 lb. drum. Rely on
it to drive your automated lubrication systems such as Centro-Matic®, Mod Lube®,
Quicklub® and Two-line.
Operating Temperature Range: -40° to +150°F (-40° to +65°C)
Operating Voltage: 120/230 VAC (50/60 Hz single phase)
Pump Outlets: ¼" NPTF
Motor: ½" HP

Pump Only Models

Capacity Maximum Pressure Speed Range
Model Power
lbs gal L Rating RPM
85598 400 55 208
120-230 AC 5000 psi (345 bar) 9 - 93
85599 120 18 68
Current Draw: Amps Output: in³/min
Model Gear Ratio
@120 V @230 V Min Max
85598
19:1 1-4.6 .5-2.4 0.7 6.3
85599

Accessories
Description 120 lb. 400 lb.
Follower plate 85492 270982
Drum cover 85474 85475
Vent valve assembly: 120 VAC 85662 85663
230 VAC 85660 85661
Strainer 272180 272180

Reel-N-Flow Pump and Reel Kits

Operating Temperature -20° to +140°F (-29° to +60°C)
Operating Voltage: 24 VDC (18 min., 30 max.)
Motor 1/3 HP (0.25 kw)
Max. Current Draw 15 AMPS
Max. Output 18.0 in³/min (295 (cm³/min)
Max. Output Pressure 6,000 psi (413.8 bar)
Pump Weight 35 lbs. kg (15.9)
Hose Reel Capacity 3/8" High Pressure Hose, 50 ft. (15 m)
Mounts on 35#/5-gallon refinery container

Pump Models
Model Description
274873 24V, Bare, high-pressure pump
274874 24V, Bare pump with integrated pressure switch and manifold
276041 12V, Bare high-pressure pump
276360 12V, Bare pump with integrated pressure switch and manifold

Accessories Kit Models

Description Model Control
Bare Connecting
Model Description Lid Follower Reel Vlv. &
10,000 psi Gauge 274872 Pump Hose
Swivel
274886 274874
35#/5-gal. pump, lid and
274934 274874 274878 274888
Container Mount follower
274886 with hose reel,
274887 50’ hose, control valve, 3050,
274874 274878 274888 94553H 276366
swivel & 7’ connecting 81729
hose
276358 276360 pump, lid 276360 274878 274888
andfollower
276358 with hose reel,
276359 50’ hose, control valve, 3050,
276358 275878 274888 94553H 276366
swivel & 7’ connecting 81729
hose

34
Centro-Matic® Automated Lubrication Systems
FlowMaster® Electric Pumps

50Hz 380/420V 3 Phase AC FlowMaster Pump

The high-performance FlowMaster product line is a new generation of pump technology.
Compact and versatile, its unique rotary drive and modular gear set let you adjust the
pump to exactly fit your application.
• Wires directly to existing AC service
• Reduces installation costs – no need to tap into hydraulic circuits or pipe in
compressed air
• Integrates easily to many styles of lubrication systems
• Heavy industry • General Industry
– Mining – Food/beverage
– Steel – Automotive
– Paper – Packaging
– And others

Pump Model: 85850 85851

Pump/Container Size: 120 lb. 400 lb.
Pump Output: 400 cm³/min. (24.5 in³/min.)
Operating Temperature: -40° to 65°C (-40° to 150°F)
Motor Max. Temperature: Up to 105°C (220°F)
Operating Voltage: 380/420 Volts 3 Phase
Motor Power: 1/2 Hp
Pump Outlet: 1/4" NPTF

Accessories
Description 120 lb. 400 lb.
Follower plate 85492 270982
Drum cover 85474 85474
Vent valve assembly 85660 85661
Strainer 272180 272180

35
Centro-Matic® Automated Lubrication Systems
Hydraulic-Powered Grease Pumps

Model 84944
Hydraulic-operated pump with 60 lb. metal reservoir and vent valve.
Model: 84944
Nominal Lubricant/
16:1
Hydraulic Pressure Ratio:
Output/Min @ 30 Cycles/Min: 11 cu. in. / 180 cc
Reservoir Capacity: 60 lb. / 27 kg ,1800 cu. in. / 29,500 cc
Hydraulic Inlet/Outlet: ¼" NPTF (M)
Lube Outlet: ¾" NPTF (M)
Important Note:
1. Pumps require a timed electrical signal to operate. Use Model 244270 (not potted) or
249605 (potted) Cycle Timer. See System Controls section for specifications.
2. Included hydraulic solenoids require 24 VDC.

Model 84961
Model 84944
Basic pump only for Model 84944. Includes pump and hydraulic control. Does not
include reservoir or vent valve.

Model 84960
Hydraulic pump for use with U.S. standard 120 lb. refinery drum. System components
(pump, vent assembly, drum cover and follower plate) must be ordered separately.

Model 84962
Hydraulic pump for custom lubricant container installations. Pump length is sized for
U.S. standard 400 lb. refinery drum depth.

Nominal Lubricant/ Output/Min @ Lube Pump Tube Pump Tube

Model
Hydraulic Pressure Ratio 30 Cycles/Min Outlet Length Diameter
84960 - -
16:1 11 in³ / 180 cm³ ¼" NPTF(F) 33¹⁵⁄₁₆" 1"
84962
862 mm 25.4 mm

Important Note:
1. Pumps require a timed electrical signal to operate. Use Model 244270 (not potted) or
Model 84960
249605 (potted) Cycle Timer. See System Controls section for specifications.
2. Included hydraulic solenoids require 24 VDC. Use Vent Assembly Model 84990; Drum Cover Model
84616 and Follower Plate Model 83371. Drum Cover and Follower Plate are for use with Model
84960 only.

Hydraulic Power Supply Requirements

Hydraulic Inlet Flow Rate @ Fluid Ambient Operating Filtration
Pressure psig / bar 30 Cycles/Min. Max. Inlet Temperature Range Requirement
Min Max GPM ltrs/min Temperature Min Max
300 / 21 3000 / 207 1.0 / 3.8 210°F/99°C -40°F/-40°C +135°F/57°C 10 Micron

Note:
All pumps have a hydraulic pressure reducing valve rated for 60 psi (4 bar) to 800 psi (55 bar) output.
Maximum input is 3000 psi (207 bar).

Model 84962

36
Centro-Matic® Automated Lubrication Systems
Airless Spray System

Airless Spray High-Pressure System

No air required—three words describe why Lincoln’s innovative new Airless Spray
System is the only system of its kind on the market. But it takes many more words to list
all the benefits the latest in Lincoln’s long line of technological advances has to offer.
Because no air is required, the Airless Spray System means that mining, concrete, steel
and other heavy industries can look forward to dependable, high-pressure lubricant
spraying that’s low-maintenance and cost-effective.

85418 Airless Spray Valve

Model 85418 Model Operating Voltage Solenoid Valve Initial Current Heater Current
85418 115 VAC .18 Amps 1.80 Amps

Spray Tips
Std Spray Std Tip with Roto-Clean Roto-Clean Tip
Model Descrip.
Tip Swivel Tip with Swivel*
252790 Retaining Nut Required Not Required Not Required Not Required
252792 Jet Stabilizer Optional Optional Optional Optional
85423 ** Std. Spray Tip Required Required Not Required Not Required
271579 Swivel Assy Optional Required Optional Required
252831 Body Not Required Not Required Required Required
Controller
85427 ** Roto-Clean Tip Not Required Not Required Required Required
* Discard tip retaining nut and protective cover, supplied with swivel assembly, when installing the roto-clean tip on a
swivel assembly.
** See chart below for spray tip models

Standard Carbide Spray Tips Roto-Clean Carbide Spray Tips

Model Model Model Model
85423-5001 85423-11003 85427-5001 85427-9501
85423-6501 85423-11004 85427-6501 85427-9502
85423-6502 85423-650067 85427-6502 85427-650067
85423-8001 85423-800067 85427-8001 85427-800067
85423-8002 85423-950080 85423-8002 85427-1100067
85423-9501 85423-1100067
85423-9502 85423-1100080
85423-11001

Pumps
Lincoln offers many pump options for supplying lubricant to the lube system. Air-
operated pumps are preferred when possible due to their versatility and wide range of
selection. Hydraulic and electric pumps are also available. The pump must be capable
of pumping the lubricant to a minimum of 3500 psi at the airless spray valve.

Filters
Model 85419 Model Description
Dual filter panel with operator valve to select one of the two 84111 filters. The other
85419 filter is isolated from the system pressure for uninterrupted service and easy element
replacement
84111 High-pressure, single in-line filter (recommended) 238 micon (60 MESH)
Model 84111 84004 Single in-line filter 140 micon (100 MESH)

37
Centro-Matic® Automated Lubrication Systems
Airless Spray System

Controllers

Control
Wiring
Harness
Assembly

Filters
Airless
Spray
Valve

Spray
Tips

High-Pressure Grease
Supply Line

Controllers
Model Description
For single and dual Airless systems. Operates system by setting the time between
254120
lubrication events. Includes manual lube button and system alarm.
For single Airless system with external initiate contacts with manual lube button and
256228
system alarm
For dual Airless system with external initiate contacts with manual lube button
254815
and system alarm

Control Wiring Harness Assembly

Model Description
25’ wiring harness connects the controller to each spray valve.
256241
One wiring assembly is required for each spray valve.

High Pressure Grease Supply Line

To be furnished by installer

2-Way Fluid Solenoid Valve

Model Description
For multiple machine/single pump applications. See design guide (form #403172) for
272285
details.

38
Centro-Matic® Automated Lubrication Systems
Pump Accessories

Reservoir Low-Level Alarm Kits

Low-level kits signal need to fill reservoir
Lubricant Switch Switch Capacity
Model Use with Models Feature
Type Type Voltage (Amps)
82653, 82655, 83668,
83800, 83834, 83167,
83599, 1833, 1835,
83671 Grease 125 VAC (15)
1849, 85434, 85435, Connect to machine
250 VAC (15)
85436, 85437, 85444, control or visual/
480 VAC (15)
85445 SPDT audible alarm circuit.
24 VDC (2)
82570, 82573, 83667,
125 VDC (½)
83696 Oil 283167, 1848, 85430
250 VDC (¼)
85431, 85440, 85441
Includes follower for
84629 Grease 84960
U.S. Std. 120 lb. drum.
85490 Grease 84050 Includes follower,
None -
249608 Grease 84050 new style visual indication only.

Follower Plates
Recommended when pumping lubricants that do not readily seek their own level.
Model Use with Pump Model Container Size
83370 87240, 87228 Standard U.S. 400 lb. refinery drum
83371 1823, 282288, 84960 Standard U.S. 120 lb. refinery drum
92544 1828, 1830 Standard U.S. 120 lb. refinery drum
92597 84050, 84944 Lincoln 60 lb. container
252725 85483 Lincoln 35 lb. unit
85489 85481 Lincoln 60 lb. unit

In-Line Lubricant Filters

Filters mount in pump outlet before vent valve on reciprocating pump systems. Removes
solid contaminants before delivering lubricants to the supply line.
Part Element Size
Maximum Pressure Connections in. Hex Body Size - in.
No. micron
84004 140
5000 psig / 340 bar ½ NPTF (M) ¼
84528 420
* 84239 10 6000 psig / 408 bar ¼ NPTF (F) 1¼
Model 84004, 84523 * In-line filter with Viton® seal.

Automatic Filling System Pressure Regulator

Pressurized systems automatically keep up to eight, single stroke oil pump reservoirs
full at all times. Use with reservoir seal kits below. Fill pump not included.
Fill Pump
Fill System Requirements
Requirements
Lubricant
Model Max. Length Reservoir Inlet/Outlet Vent Outlet
Max. * Max.
Pressure
psig / bar Ratio 5⁄8" Tube 3⁄8" Tube psig / bar
83372 125 / 8.6 3:1 100'/ 30.5m 55'/16.8m 5 /.34 ½" NPT(F) ¼" NPTF(F)
* Indicates maximum lubricant output pressure.

Pressure Kits
Seal reservoirs for automatic filling.
Model Use with Pump Models
83368 82885
83637 82570, 82573

39
Centro-Matic® Automated Lubrication Systems
Pump Accessories

Manual Filling Pumps

Designed to provide a fast, clean method of filling Centro-Matic pumps with a
self-contained reservoir without the risk of lubricant contamination
Dimensions - in. / mm
Lubricant Lubricant Container Hose Lubricant
Model Container
Type Output Capacity Length Outlet Height Width
Diameter
Grease 1 oz/stroke 645006
30 lbs. 7'
81834 NLGI #1 1.9 cu. in. Hydraulic
14.2 L 2.1 m
Max 31 cc Coupler 26¾ 14 9
1 pint/ 7 679 356 229
30 pints 5' 80599 Non-
1254 Oil strokes 473
14.2 L 1.5 m Drip Nozzle
cc

Metal Reservoirs: Rectangular reservoirs for

gravity feed oil pumps
Standard ³⁄₈" NPTF outlet furnished for gravity-fed pumps. Features spring loaded cap
with strainer, sight gauge and Buna-N O-rings. Model 84376 Sight Gauge Kit available
for use with synthetic oil.
Capacity Dimensions
Lubricant
Model Height Height Width Width Depth Depth
gal liter Outlet
in mm in. mm in mm
87417 5 19 17½ 446 12½ 318
87418 3 11.3 ⅜" NPTF (F) 10⅛ 257 13½ 343 11½ 292
87419 1.5 5.7 10½ 267 7½ 191

Cylindrical Reservoir
Four-gallon steel tank-type reservoir consisting of Model 82700 tank and Model
82612 mounting brackets. Incorporates large filler opening with screw cap.

Tank Bracket Lubricant Dimensions - in. / mm

Model Capacity
Number Number Output Height Diameter
82621 82700 82612 4 gal./15.1L ½” NPT (F) 18 / 457 9 / 229

Ultrasonic Sensor
Ultrasonic High/Low Sensor to make it easier to know when the 60 lb. Centro-Matic®
automated lubrication system reservoir is getting low on lubricant and when it’s refilled to
capacity. Sensor detects the position of the follower plate with ultrasonic waves to report
the lubricant level. The sensor is factory programmed for a 60 lb. reservoir. Its two outputs
drive external signaling devices or connect with a customer’s PLC. Three standard LEDs
offer visual indication of the sensor’s sensor status and reservoir level.

Model Description
270782 Ultrasonic sensor
270781 Ultrasonic sensor socket (required)

Switching Outputs
Ambient Power Supply Current
Protection Max. High Low
Temp. Range Operating Range less load
Current Level Level
NO NO
-13°F to 158°F contact contact
IP65 20 - 30 VDC 60 mA 200 mA
-25°C to 70°C (closes (opens
when full) when low)

40
Centro-Matic® Automated Lubrication Systems
System Controls

Selecting the right controls for your automated lubrication system is one of the last steps in the design process. Several
different models may be chosen to control power-operated pumps, depending on the degree of automation and monitoring
required. Your Lincoln representative will assist you in specifying the correct model.

Options range from simple timers to fully-automated system controllers and monitors. Basic timers allow you to set the
interval between lubrication cycles. More sophisticated monitors control the frequency of lubrication, oversee system
performance and can sense lubricant flow to each bearing while showing system status and alarms on a LCD display panel.
Monitors may be interfaced with machine control systems to protect your equipment from harm .

You may customize your installation with air and lubricant filters to prolong system life, pressure gauges for monitoring, shut-
off valves to ease future maintenance and even automated filling systems to utilize bulk lubricant storage.

All of these possibilities, and more, have made Lincoln Automated Lubrication Systems the choice of industry for over 80
years.

Model 84501 Program Timer—Solid State

Designed to control the lubrication cycle frequency of air-operated single-stroke pumps.
Timer turns pump on/off at programmed intervals via a 3-way or 4-way air solenoid
valve (not included) installed in the air line to pump.
Off Time On Time
(Cycle Time) (Pumping Time) Power
Approvals Switch Capacity
Requirement
Min. Max. Min. Max.
1 Min. 120/230 VAC 120 VAC, 5 Amps /
20 Sec. 24 Hrs. 10 Sec. UL, CSA
24 Sec. 50/60 Hz 230 VAC, 1.5 Amps

Built-In Program Ambient Operating

Enclosure
Options Temperature Range
3 Hr.Program Prelube Dimensions-in. / mm
Rating Minimum Maximum
Memory Function Height Width Depth
Yes / No Yes / No NEMA #1 8¹⁄₄ 210 6¹³⁄₁₆ 173 4¹⁵⁄₁₆ 125 0°F -18°C 130°F 54°C

Note:
Refer to Technical Manual for a full explanation of available program options.

Model 84511 Economy Timer for

Single Stroke Pumps
Uses a timing motor, cam and switch to turn pump off and on. NEMA 1 enclosure,
UL and CSA listed. Switch capacity 10 amps non-inductive.
Off Time On Time
(Cycle Time) (Pumping Time) Power
Approvals Switch Capacity
Requirement
Min. Max. Min. Max.
5 Min. 1 Hr. 30 Sec. 90 Sec. 120 VAC, 60Hz UL, CSA 10 Amps
Note: Off-time selectable in 5 minute intervals.

Enclosure
Dimensions - in. / mm
Rating
Height Width Depth
NEMA 1 5 / 127 3¹⁄₄ / 82.5 3¹⁄₂ / 89

41
Centro-Matic® Automated Lubrication Systems
System Controls

Model 84015 Timer—12-24V DC

Solid-state microprocessor-based controller for automated lubrication systems on
mobile equipment or where AC power is not available. Rugged construction with
liquid- and dust-tight enclosure. Includes manual push-button for remote initiation
of a lube cycle.
Off Time** (Cycle Time) Fixed On Time Power Switch
Min. Max. (Pumping Time) Requirement Capacity
2.5 Min. 80 Min. 75 Sec. 10-30 VDC 25 MA* 5 Amps
* Less load. ** Available selections are 2.5, 5, 10, 20, 40 or 80 minutes.

Enclosure Ambient Operating Temperature Range

Dimensions-in. / mm
Rating Minimum Maximum
Height Width Depth
NEMA
5¹⁄₄ / 133 3¹⁄₈ / 79 3 / 76 0°F / -18°C 131°F / 55°C
12

Model 85520 Programmable Controller

Microprocessor-controlled, 120 volt AC unit is fully programmable. Controller has a
wider off-time range than timers and a memory switch to turn pre-lube option on or off.
Switch Capacity
Off Time On Time
Inductive Load
(Cycle Time) (Pumping Time) Power at 120VAC
Requirements
Load Alarm
Min. Max. Min. Max.
Relay Relay
120 VAC
30 Sec. 30 Hours 30 Sec. 300 Sec. 2 Amps 2 Amps
50/60 Hz

Enclosure Ambient Operating Temperature Range

Dimensions-in. / mm
Rating Minimum Maximum
Height Width Depth
NEMA 12 7¹⁄₂ / 191 4¹⁵⁄₁₆ / 125 3¹⁄₂ / 89 -13°F / -18°C 150°F / 55°C

Model 85525 Programmable Controller

Same as Model 85520 except includes pressure switch and mounting brackets.

Model 85535 System Controller—24V DC

Same as Model 85520 except is a 24-volt DC - max “on” time = 2 min.

42
Centro-Matic® Automated Lubrication Systems
System Controls

Model 85530 Lubrication System Controller

Controls lubrication frequency and monitors supply line pressure. The LCD displays
operating status.
Pumping Time
Lube Cycle
Max Before Alarm
Timer Mode Counter Mode Count
Off Time Off Counts Rate* Min. Max.
Min. Max. Min. Max.
30/Sec. @
9,900
1 Minute 9,900 Minutes 1 Count 99,000 Counts 50% Duty 1 Minute
Minutes
Cycle
* Minimum duration of count signal is 33 milliseconds.

Power Requirements Pump,

Ambient Enclosure
(less load) Solenoid,
Temperature
or Alarm Dimensions-in. / mm
Voltage Current Range Rating
Capacity Height Width Depth
120 VAC, 50/60 Hz 85 MA
360 VA 32° to 122°F NEMA 9½ 8¹⁵⁄₁₆ 4¹⁄₈
230 VAC, 50/60 HZ 45 MA
-0° to +50° C 12 241 227 105
24 VDC 250 MA 5 Amps
Note: Model 85530 is CSA/NRTL approved.

Model 85209 Panel Mounted

Pneumatic Control System
Panel mounted units control lubrication frequency and monitor supply line pressure.
Includes Model 85530 Controller (specifications above), Model 69630 Pressure Switch
and solenoid-operated air valve.

Pumping Time
Lube Cycle Connections
Before Alarm
Max
Timer Mode Counter Mode Count
Off Time Off Counts Rate* Min. Max. Air Lube
Min. Max. Min. Max.

9,900 99,000 30/ 1 9,900 ³⁄₈" ³⁄₄"

1 Minute 1 Count
Minutes Counts Sec. Minute Minutes NPTF(F) NPTF(F)

Panel Dimensions
Power Requirements Ambient
External Alarm in. / mm
Temperature
Current Load Capacity
Voltage Range Height Width
(less load)
120 VAC, 60 Hz 32° to 122°F
47 VA 360 VA 12 / 305 18¹⁄₄ / 464
110 VAC, 50 Hz 0° to +50°C

Model 85208
Same as Model 85209 except 220 VAC, 50-60 Hz power.

43
Centro-Matic® Automated Lubrication Systems
System Controls

Model 85500 System Sentry II

The ultimate automated lubrication system controller/monitor now features greater
monitoring accuracy with less sensitivity to lubricant flow rates, feed line length, or
bearing back pressure. System Sentry II is always on the job, making sure that every
lube point is lubricated when it’s supposed to be.

• Solid-state controller with LCD status display and 16-button keypad for system
programming
• Controls up to two pumps with as many as two lube zones per pump
• Fully programmable monitoring and alarm functions
• Be set up to monitor every lube point for lubricant flow during each lubrication event
• Easy to understand prompts reported by simple English language messages in real
time

Some functions require optional accessories. Use a maximum of 48 sensors

and three accessory Sensor Boards (order separately—16 sensors per board) to
monitor lube points.

Pumping Time
Lube Cycle
Max Before Alarm
Net
Timer Mode Counter Mode Count
Wt.
Off Time Off Counts Rate* Min Max
Min. Max. Min. Max.
30/Sec. @
9,900 99,000 99 18 lbs.
1 Second 1 Count 50% Duty 1 Second
Minutes Counts Minutes 8.1 kg
Cycle
* Minimum duration of count signal is 33 milliseconds.

Power Requirements Pump,

Ambient Enclosure
(less load) Solenoid,
Temperature
or Alarm Dimensions-in. / mm
Voltage Current Range Rating
Capacity Height Width Depth
120 VAC, 50/60 Hz 250 MA*
360 VA 32° to 122°F NEMA
230 VAC, 50/60 HZ 125 MA* 11/241 14/227 4⁷⁄₈/105
0° to 50° C 12
24 VDC 600 MA* 5 Amps
Note:
Model 85500 is CSA/NRTL approved.
* No external load, no sensors.

44
Centro-Matic® Automated Lubrication Systems
System Controls

Model 247333 Pressure Transducer

Pressure Transducer signals actual system pressure via LCD display of System
Sentry II. Comes with 72 inch (1.8m) shielded 24-gauge connecting wire. Maximum
length of wire between transducer and monitor is 30 (9.1m) feet.

Pressure Ambient Voltage

Range Accuracy Proof Input Offset Enclosure
Connection Temp. Output
NEMA 4X
7500
0 to 10 to Rating
psig ¹⁄₄" NPT Male -20° to 180° F
4000 psi ±1% 30 1-6 VDC 1 VDC 300 Series
517 Thread -29° to 82° C
276 bar VDC Stainless
bar
Steel

Model 250365 Sensor Board

Plug-in accessory board used with Model 85500 that allows the attachment of up to
16 lube flow sensors. (Model 85500 comes without boards installed and can hold up
to a total of three.)

Sensor Assemblies
Sensor assemblies consist of a check body and lube sensor with attached 30' cable.
Cables are epoxy potted into the sensors for a watertight seal. Sensors have a ⅜"
pipe thread for conduit connection and a Viton® O-ring seal. Check bodies terminate
in a ⅛" NPTF male thread for attachment to a bearing or other lubricant inlet.
Maximum working pressure 6,000 psi (414 bar). Maximum wire run from sensor to
monitor is 500 feet (152m).

Lubricant Min. Interval

Min. Flow Inlet/
Model Description Construction Temp. Between Lube
Per Event Outlet
Range Flow Event
Straight
250400 Sensor .004 cu.
Brass Sensor
Assembly in./.066 cc @
& Plated Steel
32°F /0°C to
90° Sensor Check Body
250490 125°F/52°C
Assembly 32° to 145° F
1/8" 30 Seconds
Straight 0° to 63° C
250500 Sensor 316 Stainless .008 in³/.131cc
Assembly Steel Sensor & @ 126°F/53°C
90° Sensor Check Body to 145°F/63°C)
250590
Assembly

Model 243100 Sensor Wire

100 foot (30.5 meters) coil of two conductor 22-gauge wire for connecting sensors to
monitor. Maximum length of wire between sensor and monitor is 500 feet (152 meters).

45
Centro-Matic® Automated Lubrication Systems
System Controls

Use This Guide to Select Accessories for

Model 85500 System Sentry II
Pressure Pressure Sensor Sensor Wire
Sensors
Function Switch Transducer Board #243100 (100')
Note 2
#69630 #247333 #250365 Note 3

Lube Controller
1 Pump, 1 Zone Optional 1 Optional 1 — — —
Note 1
Lube Controller, Required
1 Pump, 1 per Zone Required 1 — — — —
Up to 3 Zones (3Max.)
Lube Controller,
Required 2
2 Pumps, 1 Zone No — — —
(1 per Pump)
Per Pump
Lube Controller, Required
Required 2
2 Pumps, Up to 2 1 per Zone — — —
1 per Pump)
Zones Per Pump (4Max.)
Lube Point Required Required Required
Monitoring — — 1 per each 1 per Quantity
≤ 48 Points 16 Sensors Lube Point As Needed

Note 1: Controller may be operated without a pressure switch or pressure transducer but will not be
able to monitor and alarm for lube system pressure failures.
Note 2: Sensors include 30' (9.1m) cable pigtail. Select brass/plated steel or stainless steel sensors
in straight or 90° configuration as required.

Note 3: Maximum distance between monitor and sensor is 500' (152 meters).

46
Centro-Matic® Automated Lubrication Systems
System Controls

Electric Solenoid-Operated Air Valves

Electrical Characteristics
Air Ambient Max.
Model Type Inrush Holding Inlet/ Temperature Cv Pressure Conduit
Power Factor Connection
Current Current Outlet Range psi / bar
Requirements
Amps Amps
110 VAC, 50 Hz
350244 120 VAC, 60 Hz .11 .07
8.4 VA 0° to 120°F
4-Way 1.2
220 VAC, 50 Hz -18° to 49°C
350245 240 VAC, 60 Hz .055 .035
8.4 VA ¼
½" NPS(F)
110 VAC, 50 Hz NPT(F)
350241 120 VAC, 60 Hz .11 .07
8.4 VA
220 VAC, 50 Hz
350242 3-Way 240 VAC, 60 Hz .055 .035 .18
150 / 10.3
8.4 VA
0° to 140°F
350282 12 VDC 6 Watts ⅛" -18° to 60°C
N/A N/A N/A
350283 24 VDC 6 Watts NPT(F)
120V, 60 Hz 12 ⅜"
68586 2-Way .2 .1 2.4 ½" NPT(F)
VA NPT(F)
24 VDC 8.5 ¼"
274398 N/A N/A .5 N/A
Watts NPT(F)
3-Way 110 VAC, 50 Hz
⅜" 0° to 120°F
244727 120 VAC, 60 Hz .12 .09 4.4 ½" NPT(F)
NPT(F) -18° to 49°C
11 VA

Model 249605 Sealed Cycle Timer

Sealed timer attaches to Lincoln 16:1 Hydraulic Pumps and generates timed pulse signal to
control pump reciprocating cycle rate.

Power Cycle Rate/Minute

Requirement Min. Max
24 VDC 6 60

47
Centro-Matic® Automated Lubrication Systems
System Controls

End-of-Line Monitors
Designed to detect system pressure utilizing normally open or normally closed switch.
Operating Range - Dimensions -
Switch psig / bar Lube in / mm Conduit
Model
Rating Inlet Connection
Min. Max Height Width
83898 125, 250 1200 / 83 2500 / 172
¹⁄₄"
480 VAC, 5³⁄₄ / 146 2¹⁄₄ / 57 ¹⁄₂" NPSM
83899 700 / 48 1150 / 79 NPTF(F)
15 Amps

Model 83354 Signal Monitor

Designed to provide visual and audible indication of system operation and failure.
Utilizes signal from system controller. Includes Model 69606 Alarm Horn mounted on
enclosure door.
Indicator Lamps Dimensions - in / mm
Power Audible
Requirement Power Lube System Alarm
Height Width Depth
On System On Failure
115 VAC 69606 Horn
Green Amber Red 10 / 254 8 / 203 6 / 152
50/60 Hz 35 VA (Included)
Note: Lamps and horn are U.L. listed.

Model 69630 Pressure Switch

Senses supply line pressure rise/fall to signal system operation to controller or
system alarm.
Adjustable Range - psig
Switch Capacity Connections
/ bar
Type
Decreasing Increasing
AC DC Lube Electrical
Min Max Min. Max.
10 Amps at 15Amps@6VDC ²⁷⁄₃₂" hole for
Single 250 / 2775 / 280 / 3000 ¹⁄₄"
125, 250 or 5Amps@24VDC .03 ¹⁄₂" conduit
Contact 17 191 19 / 207 NPT(F)
480 VDC Amps@ 250 VDC connector
Note: Pressure switch has a NEMA 3 housing and UL listed switching elements.

48
Centro-Matic® Automated Lubrication Systems
Numerical Index

Viton® and Teflon® are registered trademarks of DuPont Performance Elastomers

Model No. Page No. Model No. Page No. Model No. Page No.
P603S . . . . . . . . . . . . . . . . . . . . . . 20, 21 66713 . . . . . . . . . . . . . . . . . . . . . . . . . 17 82294-3 . . . . . . . . . . . . . . . . . . . . . . . 13
P653S . . . . . . . . . . . . . . . . . . . . . . 18, 19 67007 . . . . . . . . . . . . . . . . . . . . . . . . . 17 82294-4 . . . . . . . . . . . . . . . . . . . . . . . 13
SL-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 67007-9 . . . . . . . . . . . . . . . . . . . . . . . 17 82294-5 . . . . . . . . . . . . . . . . . . . . . . . 13
SL-11 . . . . . . . . . . . . . . . . . . . . . . . . . . 10 67044 . . . . . . . . . . . . . . . . . . . . . . . . . 17 82295 . . . . . . . . . . . . . . . . . . . . . . . . . 13
SL-32 . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 68421 . . . . . . . . . . . . . . . . . . . . . . . . . 17 82570 . . . . . . . . . . . . . . . . . . . . . . 29, 39
SL-32 METRIC . . . . . . . . . . . . . . . . . . 15 68483 . . . . . . . . . . . . . . . . . . . . . . . . . 16 82573 . . . . . . . . . . . . . . . . . . . . . . 29, 39
SL-33 . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 68586 . . . . . . . . . . . . . . . . . . . . . . . . . 47 82612 . . . . . . . . . . . . . . . . . . . . . . . . . 40
SL-33 METRIC . . . . . . . . . . . . . . . . . . 15 68587 . . . . . . . . . . . . . . . . . . . . . . . . . 17 82621 . . . . . . . . . . . . . . . . . . . . . . . . . 40
SL-41 . . . . . . . . . . . . . . . . . . . . . . . . . . 13 68874 . . . . . . . . . . . . . . . . . . . . . . . . . 17 82653 . . . . . . . . . . . . . . . . . . . . . . 24, 39
SL-42 . . . . . . . . . . . . . . . . . . . . . . . . . . 11 69456 . . . . . . . . . . . . . . . . . . . . . . . . . 17 82655 . . . . . . . . . . . . . . . . . . . . . . 24, 39
SL-42 METRIC . . . . . . . . . . . . . . . . . . 15 69606 . . . . . . . . . . . . . . . . . . . . . . . . . .48 82676 . . . . . . . . . . . . . . . . . . . . . . . . . 29
SL-43 . . . . . . . . . . . . . . . . . . . . . . . . . . 12 69630 . . . . . . . . . . . . . . . . . . . 43, 46, 48 82700 . . . . . . . . . . . . . . . . . . . . . . . . . 40
SL-44 . . . . . . . . . . . . . . . . . . . . . . . . . . 14 80072 . . . . . . . . . . . . . . . . . . . . . . . . . .19 82885 . . . . . . . . . . . . . . . . . . . . . . 29, 39
SL-V . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 80073 . . . . . . . . . . . . . . . . . . . . . . . . . .19 82886 . . . . . . . . . . . . . . . . . . . . . . . . . 24
SL-V XL . . . . . . . . . . . . . . . . . . . . . . . . . 8 80074 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83167 . . . . . . . . . . . . . . . . . . . . . . 25, 39
525-32083-1 . . . . . . . . . . . . . . . . . . . . 33 80075 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83272 . . . . . . . . . . . . . . . . . . . . . . . . . 16
645-41062-3 . . . . . . . . . . . . . . . . . . . . 20 80076 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83309-1 . . . . . . . . . . . . . . . . . . . . . . . . . 5
645-41062-4 . . . . . . . . . . . . . . . . . . . . 20 80077 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83309-2 . . . . . . . . . . . . . . . . . . . . . . . . 5
645-41062-7 . . . . . . . . . . . . . . . . . . . . 20 80078 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83309-3 . . . . . . . . . . . . . . . . . . . . . . . . 5
645-41062-8 . . . . . . . . . . . . . . . . . . . . 20 80079 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83309-4 . . . . . . . . . . . . . . . . . . . . . . . . 5
645-41062-9 . . . . . . . . . . . . . . . . . . . . 20 80080 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83309-5 . . . . . . . . . . . . . . . . . . . . . . . . 5
645-41064-2 . . . . . . . . . . . . . . . . . . . . 20 80081 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83309-6 . . . . . . . . . . . . . . . . . . . . . . . . 5
645-41064-3 . . . . . . . . . . . . . . . . . . . . 20 80082 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83311-1 . . . . . . . . . . . . . . . . . . . . . . . 11
645-41064-4 . . . . . . . . . . . . . . . . . . . . 20 80083 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83311-2 . . . . . . . . . . . . . . . . . . . . . . . 11
645-41064-6 . . . . . . . . . . . . . . . . . . . . 20 80084 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83311-3 . . . . . . . . . . . . . . . . . . . . . . . 11
645-41064-7 . . . . . . . . . . . . . . . . . . . . 20 80085 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83311-4 . . . . . . . . . . . . . . . . . . . . . . . 11
645-41064-8 . . . . . . . . . . . . . . . . . . . . 20 80086 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83311-5 . . . . . . . . . . . . . . . . . . . . . . . 11
645-41073-5 . . . . . . . . . . . . . . . . . . . . 20 80087 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83311-6 . . . . . . . . . . . . . . . . . . . . . . . 11
645-41110-2 . . . . . . . . . . . . . . . . . . . . 20 80088 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83311-10 . . . . . . . . . . . . . . . . . . . . . . 11
645-41110-3 . . . . . . . . . . . . . . . . . . . . 20 80089 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83311-15 . . . . . . . . . . . . . . . . . . . . . . 11
645-41119-1 . . . . . . . . . . . . . . . . . . . . 20 80090 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83313 . . . . . . . . . . . . . . . . . . . . . . . . . 11
1254 . . . . . . . . . . . . . . . . . . . . . . . . . . 40 80091 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83314 . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1810 . . . . . . . . . . . . . . . . . . . . . . . . . . 22 80105 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83314-9 . . . . . . . . . . . . . . . . . . . . . . . . 5
1812 . . . . . . . . . . . . . . . . . . . . . . . . . . 27 80106 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83336-1 . . . . . . . . . . . . . . . . . . . . . . . . 6
1823 . . . . . . . . . . . . . . . . . . . . . . . 26, 39 80107 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83336-2 . . . . . . . . . . . . . . . . . . . . . . . . 6
1826 . . . . . . . . . . . . . . . . . . . . . . . . . . 30 80108 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83336-3 . . . . . . . . . . . . . . . . . . . . . . . . 6
1827 . . . . . . . . . . . . . . . . . . . . . . . . . . 26 80109 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83336-4 . . . . . . . . . . . . . . . . . . . . . . . . 6
1828 . . . . . . . . . . . . . . . . . . . . . . . 26, 39 80110 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83337 . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1829 . . . . . . . . . . . . . . . . . . . . . . . . . . 26 80111 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83337-9 . . . . . . . . . . . . . . . . . . . . . . . . 6
1830 . . . . . . . . . . . . . . . . . . . . . . . . . . 39 80112 . . . . . . . . . . . . . . . . . . . . . . . . . .19 83338 . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1833 . . . . . . . . . . . . . . . . . . . . . . . 27, 39 80599 . . . . . . . . . . . . . . . . . . . . . . . . . 40 83447 . . . . . . . . . . . . . . . . . . . . . . . . . .26
1835 . . . . . . . . . . . . . . . . . . . . . . . 27, 39 81646 . . . . . . . . . . . . . . . . . . . . . . . . . 16 83354 . . . . . . . . . . . . . . . . . . . . . . . . . 48
1848 . . . . . . . . . . . . . . . . . . . . . . . 30, 39 81675 . . . . . . . . . . . . . . . . . . . . . . 26, 30 83368 . . . . . . . . . . . . . . . . . . . . . . . . . 39
1849 . . . . . . . . . . . . . . . . . . . . . . . 27, 39 81713 . . . . . . . . . . . . . . . . . . . . . . . . . . 9 83370 . . . . . . . . . . . . . . . . . . . . . . . . . 39
2002 . . . . . . . . . . . . . . . . . . . . . . . . . . 30 81713A . . . . . . . . . . . . . . . . . . . . . . . . . 9 83371 . . . . . . . . . . . . . . . . . . . 26, 36, 39
2004 . . . . . . . . . . . . . . . . . . . . . . . . . . .26 81729 . . . . . . . . . . . . . . . . . . . . . . . . . .34 83372 . . . . . . . . . . . . . . . . . . . . . . . . . 39
2008 . . . . . . . . . . . . . . . . . . . . . . . . . . 26 81770-1 . . . . . . . . . . . . . . . . . . . . . . . . 9 83535 . . . . . . . . . . . . . . . . . . . . . . . . . 11
2010 . . . . . . . . . . . . . . . . . . . . . . . . . . 26 81770-2 . . . . . . . . . . . . . . . . . . . . . . . . 9 83599 . . . . . . . . . . . . . . . . . . . . . . 25, 39
3050 . . . . . . . . . . . . . . . . . . . . . . . . . . .34 81770-3 . . . . . . . . . . . . . . . . . . . . . . . . 9 83637 . . . . . . . . . . . . . . . . . . . . . . . . . 39
12511 . . . . . . . . . . . . . . . . . . . . . . . . . 17 81770-4 . . . . . . . . . . . . . . . . . . . . . . . . 9 83661-2 . . . . . . . . . . . . . . . . . . . . . . . 12
12511-9 . . . . . . . . . . . . . . . . . . . . . . . 17 81770-5 . . . . . . . . . . . . . . . . . . . . . . . . 9 83661-3 . . . . . . . . . . . . . . . . . . . . . . . 12
12698 . . . . . . . . . . . . . . . . . . . . . . . . . 17 81770-6 . . . . . . . . . . . . . . . . . . . . . . . . 9 83661-4 . . . . . . . . . . . . . . . . . . . . . . . 12
12698-9 . . . . . . . . . . . . . . . . . . . . . . . 17 81834 . . . . . . . . . . . . . 22, 24, 25, 27, 40 83660 . . . . . . . . . . . . . . . . . . . . . . . . . 12
14988 . . . . . . . . . . . . . . . . . . . . . . . . . 16 82272 . . . . . . . . . . . . . . . . . . . . . . . . . 17 83661-1 . . . . . . . . . . . . . . . . . . . . . . . 12
14991 . . . . . . . . . . . . . . . . . . . . . . . . . 16 82292 . . . . . . . . . . . . . . . . . . . . . . . . . .13 83667 . . . . . . . . . . . . . . . . . . . . . . 29, 39
66260 . . . . . . . . . . . . . . . . . . . . . . . . . 17 82294-1 . . . . . . . . . . . . . . . . . . . . . . . 13 83668 . . . . . . . . . . . . . . . . . . . . . . 24, 39
66260-9 . . . . . . . . . . . . . . . . . . . . . . . 17 82294-2 . . . . . . . . . . . . . . . . . . . . . . . 13 83671 . . . . . . . . . . . . . . . . . . . . . . . . . 39

49
Centro-Matic® Automated Lubrication Systems
Numerical Index

Model No. Page No. Model No. Page No. Model No. Page No.
83696 . . . . . . . . . . . . . . . . . . . . . . . . . 39 84960 . . . . . . . . . . . . . . . . . . . . . . 36, 39 85433 . . . . . . . . . . . . . . . . . . . . . . . . . 28
83715-1 . . . . . . . . . . . . . . . . . . . . . . . . 5 84961 . . . . . . . . . . . . . . . . . . . . . . . . . 36 85434 . . . . . . . . . . . . . . . . . . . . . . 23, 39
83715-2 . . . . . . . . . . . . . . . . . . . . . . . . 5 84962 . . . . . . . . . . . . . . . . . . . . . . . . . 36 85435 . . . . . . . . . . . . . . . . . . . . . . 23, 39
83715-3 . . . . . . . . . . . . . . . . . . . . . . . . 5 84990 . . . . . . . . . . . . . . . . . . . . . . 32, 36 85436 . . . . . . . . . . . . . . . . . . . . . . 23, 39
83715-4 . . . . . . . . . . . . . . . . . . . . . . . . 5 85208 . . . . . . . . . . . . . . . . . . . . . . . . . 43 85437 . . . . . . . . . . . . . . . . . . . . . . . . . 39
83715-6 . . . . . . . . . . . . . . . . . . . . . . . . 5 85209 . . . . . . . . . . . . . . . . . . . 26, 30, 43 85438 . . . . . . . . . . . . . . . . . . . . . . . . . 28
83715-7 . . . . . . . . . . . . . . . . . . . . . . . . 5 85215 . . . . . . . . . . . . . . . . . . . . . . . . . 26 85440 . . . . . . . . . . . . . . . . . . . . . . 28, 39
83724-1 . . . . . . . . . . . . . . . . . . . . . . . . 6 85217 . . . . . . . . . . . . . . . . . . . . . . . . . 30 85441 . . . . . . . . . . . . . . . . . . . . . . 28, 39
83724-2 . . . . . . . . . . . . . . . . . . . . . . . . 6 85218 . . . . . . . . . . . . . . . . . . . . . . . . . 26 85442 . . . . . . . . . . . . . . . . . . . . . . . . . 23
83724-3 . . . . . . . . . . . . . . . . . . . . . . . . 6 85220 . . . . . . . . . . . . . . . . . . . . . . . . . 32 85444 . . . . . . . . . . . . . . . . . . . . . . 23, 39
83724-4 . . . . . . . . . . . . . . . . . . . . . . . . 6 85351-1 . . . . . . . . . . . . . . . . . . . . . . . 15 85445 . . . . . . . . . . . . . . . . . . . . . . 23, 39
83730 . . . . . . . . . . . . . . . . . . . . . . . . . 16 85351-2 . . . . . . . . . . . . . . . . . . . . . . . 15 85460 . . . . . . . . . . . . . . . . . . . . . . . . . 31
83748 . . . . . . . . . . . . . . . . . . . . . . . . . 14 85351-3 . . . . . . . . . . . . . . . . . . . . . . . 15 85471 . . . . . . . . . . . . . . . . . . . . . . . . . 33
83749-1 . . . . . . . . . . . . . . . . . . . . . . . 14 85351-4 . . . . . . . . . . . . . . . . . . . . . . . 15 85472 . . . . . . . . . . . . . . . . . . . . . . . . . 33
83749-2 . . . . . . . . . . . . . . . . . . . . . . . 14 85351-5 . . . . . . . . . . . . . . . . . . . . . . . 15 85473 . . . . . . . . . . . . . . . . . . . . . . . . . 33
83749-3 . . . . . . . . . . . . . . . . . . . . . . . 14 85351-6 . . . . . . . . . . . . . . . . . . . . . . . 15 85474 . . . . . . . . . . . . . . . . . . . 33, 34, 35
83749-4 . . . . . . . . . . . . . . . . . . . . . . . 14 85352-1 . . . . . . . . . . . . . . . . . . . . . . . 15 85475 . . . . . . . . . . . . . . . . . . . . . . 33, 34
83749-5 . . . . . . . . . . . . . . . . . . . . . . . 14 85352-2 . . . . . . . . . . . . . . . . . . . . . . . 15 85479 . . . . . . . . . . . . . . . . . . . . . . . . . .33
83800 . . . . . . . . . . . . . . . . . . . . . . 24, 39 85352-3 . . . . . . . . . . . . . . . . . . . . . . . 15 85480 . . . . . . . . . . . . . . . . . . . . . . . . . 32
83817 . . . . . . . . . . . . . . . . . . . . . . . . . 22 85352-4 . . . . . . . . . . . . . . . . . . . . . . . 15 85481 . . . . . . . . . . . . . . . . . . . . . . 32, 39
83834 . . . . . . . . . . . . . . . . . . . . . . 24, 39 85352-5 . . . . . . . . . . . . . . . . . . . . . . . 15 85482 . . . . . . . . . . . . . . . . . . . . . . . . . 32
83898 . . . . . . . . . . . . . . . . . . . . . . . . . 48 85352-6 . . . . . . . . . . . . . . . . . . . . . . . 15 85483 . . . . . . . . . . . . . . . . . . . . . . 32, 39
83899 . . . . . . . . . . . . . . . . . . . . . . . . . 48 85353-1 . . . . . . . . . . . . . . . . . . . . . . . 15 85487 . . . . . . . . . . . . . . . . . . . . . . . . . 32
83900 . . . . . . . . . . . . . . . . . . . . . . . . . . 5 85353-2 . . . . . . . . . . . . . . . . . . . . . . . 15 85489 . . . . . . . . . . . . . . . . . . . . . . . . . 39
83900-9 . . . . . . . . . . . . . . . . . . . . . . . . 5 85353-3 . . . . . . . . . . . . . . . . . . . . . . . 15 85490 . . . . . . . . . . . . . . . . . . . . . . . . . 39
83924 . . . . . . . . . . . . . . . . . . . . . . . . . 17 85353-4 . . . . . . . . . . . . . . . . . . . . . . . 15 85492 . . . . . . . . . . . . . . . . 32, 33, 34, 35
83924-9 . . . . . . . . . . . . . . . . . . . . . . . 17 85391 . . . . . . . . . . . . . . . . . . . . . . . . . 29 85497 . . . . . . . . . . . . . . . . . . . . . . . . . 10
84004 . . . . . . . . . . . . . . . . . . . . . . 37, 39 85418 . . . . . . . . . . . . . . . . . . . . . . . . . 37 85500 . . . . . . . . . . . . . . . . . . . 44, 45, 46
84015 . . . . . . . . . . . . . . . . . . . . . . . . . 42 85419 . . . . . . . . . . . . . . . . . . . . . . . . . 37 85520 . . . . . . . . . . . . . . . . . . . 27, 30, 42
84034 . . . . . . . . . . . . . . . . . . . . . . . . . 26 85423 . . . . . . . . . . . . . . . . . . . . . . . . . .37 85525 . . . . . . . . . . . . . . . . . . . . . . . . . 42
84048 . . . . . . . . . . . . . . . . . . . . . . . . . 11 85427 . . . . . . . . . . . . . . . . . . . . . . . . . .37 85530 . . . . . . . . . . . . . . . . . . . . . . . . . 43
84050 . . . . . . . . . . . . . . . . . . . . . . 31, 39 85423-5001 . . . . . . . . . . . . . . . . . . . . 37 85535 . . . . . . . . . . . . . . . . . . . . . . . . . 42
84110 . . . . . . . . . . . . . . . . . . . . . . . . . 12 85423-6501 . . . . . . . . . . . . . . . . . . . . 37 85552 . . . . . . . . . . . . . . . . . . . . . . . . . .33
84111 . . . . . . . . . . . . . . . . . . . . . . . . . 37 85423-6502 . . . . . . . . . . . . . . . . . . . . 37 85553 . . . . . . . . . . . . . . . . . . . . . . . . . .33
84195 . . . . . . . . . . . . . . . . . . . . . . . . . 16 85423-8001 . . . . . . . . . . . . . . . . . . . . 37 85554 . . . . . . . . . . . . . . . . . . . . . . . . . .33
84200 . . . . . . . . . . . . . . . . . . . . . . . . . 16 85423-8002 . . . . . . . . . . . . . . . . . . . . 37 85566 . . . . . . . . . . . . . . . . . . . . . . . . . .33
84203 . . . . . . . . . . . . . . . . . . . . . . . . . 16 85423-9501 . . . . . . . . . . . . . . . . . . . . 37 85567 . . . . . . . . . . . . . . . . . . . . . . . . . .33
84204 . . . . . . . . . . . . . . . . . . . . . . . . . 17 85423-9502 . . . . . . . . . . . . . . . . . . . . 37 85568 . . . . . . . . . . . . . . . . . . . . . . . . . .33
84239 . . . . . . . . . . . . . . . . . . . . . . . . . 39 85423-11001 . . . . . . . . . . . . . . . . . . . 37 85569 . . . . . . . . . . . . . . . . . . . . . . . . . .33
84376 . . . . . . . . . . . . . . . . . . . . . . . . . 40 85423-11003 . . . . . . . . . . . . . . . . . . . 37 85582 . . . . . . . . . . . . . . . . . . . . . . . . . .33
84428-1 . . . . . . . . . . . . . . . . . . . . . . . 11 85423-11004 . . . . . . . . . . . . . . . . . . . 37 85585 . . . . . . . . . . . . . . . . . . . . . . . . . 32
84428-2 . . . . . . . . . . . . . . . . . . . . . . . 11 85423-650067 . . . . . . . . . . . . . . . . . . 37 85591 . . . . . . . . . . . . . . . . . . . . . . . . . .33
84428-3 . . . . . . . . . . . . . . . . . . . . . . . 11 85423-800067 . . . . . . . . . . . . . . . . . . 37 85598 . . . . . . . . . . . . . . . . . . . . . . . . . .34
84428-4 . . . . . . . . . . . . . . . . . . . . . . . 11 85423-950080 . . . . . . . . . . . . . . . . . . 37 85599 . . . . . . . . . . . . . . . . . . . . . . . . . .34
84428-5 . . . . . . . . . . . . . . . . . . . . . . . 11 85423-1100067 . . . . . . . . . . . . . . . . . 37 85660 . . . . . . . . . . . . . . . . . . . . . . 34, 35
84428-6 . . . . . . . . . . . . . . . . . . . . . . . 11 85423-1100080 . . . . . . . . . . . . . . . . . 37 85661 . . . . . . . . . . . . . . . . . . . . . . 34, 35
84428-10 . . . . . . . . . . . . . . . . . . . . . . 11 85427-5001 . . . . . . . . . . . . . . . . . . . . 37 85662 . . . . . . . . . . . . . . . . . . . . . . . . . 34
84428-15 . . . . . . . . . . . . . . . . . . . . . . 11 85427-6501 . . . . . . . . . . . . . . . . . . . . 37 85663 . . . . . . . . . . . . . . . . . . . . . . . . . 34
84429-1 . . . . . . . . . . . . . . . . . . . . . . . 12 85427-6502 . . . . . . . . . . . . . . . . . . . . 37 85664 . . . . . . . . . . . . . . . . . . . . . . . . . .33
84429-2 . . . . . . . . . . . . . . . . . . . . . . . 12 85427-8001 . . . . . . . . . . . . . . . . . . . . 37 85665 . . . . . . . . . . . . . . . . . . . . . . . . . .33
84429-3 . . . . . . . . . . . . . . . . . . . . . . . 12 85427-8002 . . . . . . . . . . . . . . . . . . . . 37 85676 . . . . . . . . . . . . . . . . . . . . . . . . . 32
84429-4 . . . . . . . . . . . . . . . . . . . . . . . 12 85427-9501 . . . . . . . . . . . . . . . . . . . . 37 85677 . . . . . . . . . . . . . . . . . . . . . . . . . 32
84501 . . . . . . . . . . . . . . . . . . . 24, 29, 41 85427-9502 . . . . . . . . . . . . . . . . . . . . 37 85678 . . . . . . . . . . . . . . . . . . . . . . . . . 32
84511 . . . . . . . . . . . . . . . . . . . . . . . . . 41 85427-650067 . . . . . . . . . . . . . . . . . . 37 85770-1 . . . . . . . . . . . . . . . . . . . . . . . . 7
84528 . . . . . . . . . . . . . . . . . . . . . . . . . 39 85427-800067 . . . . . . . . . . . . . . . . . . 37 85770-2 . . . . . . . . . . . . . . . . . . . . . . . . 7
84616 . . . . . . . . . . . . . . . . . . . . . . 32, 36 85427-1100067 . . . . . . . . . . . . . . . . . 37 85770-3 . . . . . . . . . . . . . . . . . . . . . . . . 7
84629 . . . . . . . . . . . . . . . . . . . . . . . . . 39 85430 . . . . . . . . . . . . . . . . . . . . . . 28, 39 85770-4 . . . . . . . . . . . . . . . . . . . . . . . . 7
84776 . . . . . . . . . . . . . . . . . . . . . . . . . . 9 85431 . . . . . . . . . . . . . . . . . . . . . . 28, 39 85770-5 . . . . . . . . . . . . . . . . . . . . . . . . 7
84944 . . . . . . . . . . . . . . . . . . . . . . 36, 39 85432 . . . . . . . . . . . . . . . . . . . . . . . . . 28 85770-6 . . . . . . . . . . . . . . . . . . . . . . . . 7

50
Centro-Matic® Automated Lubrication Systems
Numerical Index

Model No. Page No. Model No. Page No. Model No. Page No.
85771 . . . . . . . . . . . . . . . . . . . . . . . . . . 7 239351 . . . . . . . . . . . . . . . . . . . . . . . . . 9 272285 . . . . . . . . . . . . . . . . . . . . . . . . 38
85772 . . . . . . . . . . . . . . . . . . . . . . . . . . 7 239352 . . . . . . . . . . . . . . . . . . . . . . . . . 9 273088 . . . . . . . . . . . . . . . . . . . . . . . . 16
85780-1 . . . . . . . . . . . . . . . . . . . . . . . . 8 239353 . . . . . . . . . . . . . . . . . . . . . . . . . 9 273089 . . . . . . . . . . . . . . . . . . . . . . . . 16
85780-2 . . . . . . . . . . . . . . . . . . . . . . . . 8 239354 . . . . . . . . . . . . . . . . . . . . . . . . . 9 274398 . . . . . . . . . . . . . . . . . . . . . . . . 47
85780-3 . . . . . . . . . . . . . . . . . . . . . . . . 8 239355 . . . . . . . . . . . . . . . . . . . . . . . . . 9 274824 . . . . . . . . . . . . . . . . . . . . . . . . .16
85780-4 . . . . . . . . . . . . . . . . . . . . . . . . 8 243100 . . . . . . . . . . . . . . . . . . . . . 45, 46 274872 . . . . . . . . . . . . . . . . . . . . . . . . .34
85780-5 . . . . . . . . . . . . . . . . . . . . . . . . 8 244270 . . . . . . . . . . . . . . . . . . . . . . . . 36 274873 . . . . . . . . . . . . . . . . . . . . . . . . .34
85780-6 . . . . . . . . . . . . . . . . . . . . . . . . 8 244727 . . . . . . . . . . . . . . . . . . . . . . . . 47 274874 . . . . . . . . . . . . . . . . . . . . . . . . .34
85781 . . . . . . . . . . . . . . . . . . . . . . . . . . 8 247333 . . . . . . . . . . . . . . . . . . . . . 45, 46 274878 . . . . . . . . . . . . . . . . . . . . . . . . .34
85782 . . . . . . . . . . . . . . . . . . . . . . . . . . 8 249281 . . . . . . . . . . . . . . . . . . . . . 16, 17 274886 . . . . . . . . . . . . . . . . . . . . . . . . .34
85785-1 . . . . . . . . . . . . . . . . . . . . . . . . 8 249282 . . . . . . . . . . . . . . . . . . . . . 16, 17 274887 . . . . . . . . . . . . . . . . . . . . . . . . .34
85785-2 . . . . . . . . . . . . . . . . . . . . . . . . 8 249605 . . . . . . . . . . . . . . . . . . . . . 36, 47 274888 . . . . . . . . . . . . . . . . . . . . . . . . .34
85785-3 . . . . . . . . . . . . . . . . . . . . . . . . 8 249608 . . . . . . . . . . . . . . . . . . . . . . . . 39 274899 . . . . . . . . . . . . . . . . . . . . . . . . .33
85785-4 . . . . . . . . . . . . . . . . . . . . . . . . 8 250365 . . . . . . . . . . . . . . . . . . . . . 45, 46 274934 . . . . . . . . . . . . . . . . . . . . . . . . .34
85785-5 . . . . . . . . . . . . . . . . . . . . . . . . 8 250400 . . . . . . . . . . . . . . . . . . . . . . . . 45 275878 . . . . . . . . . . . . . . . . . . . . . . . . .34
85785-6 . . . . . . . . . . . . . . . . . . . . . . . . 8 250490 . . . . . . . . . . . . . . . . . . . . . . . . 45 276041 . . . . . . . . . . . . . . . . . . . . . . . . .34
85785-7 . . . . . . . . . . . . . . . . . . . . . . . . 8 250500 . . . . . . . . . . . . . . . . . . . . . . . . 45 276358 . . . . . . . . . . . . . . . . . . . . . . . . .34
85785-8 . . . . . . . . . . . . . . . . . . . . . . . . 8 250590 . . . . . . . . . . . . . . . . . . . . . . . . 45 276359 . . . . . . . . . . . . . . . . . . . . . . . . .34
85785-9 . . . . . . . . . . . . . . . . . . . . . . . . 8 252725 . . . . . . . . . . . . . . . . . . . . . . . . 39 276360 . . . . . . . . . . . . . . . . . . . . . . . . .34
85785-10 . . . . . . . . . . . . . . . . . . . . . . . 8 252790 . . . . . . . . . . . . . . . . . . . . . . . . 37 276325 . . . . . . . . . . . . . . . . . . . . . . . . .33
85850 . . . . . . . . . . . . . . . . . . . . . . . . . .35 252792 . . . . . . . . . . . . . . . . . . . . . . . . 37 276366 . . . . . . . . . . . . . . . . . . . . . . . . .34
85851 . . . . . . . . . . . . . . . . . . . . . . . . . .35 252831 . . . . . . . . . . . . . . . . . . . . . . . . 37 276903 . . . . . . . . . . . . . . . . . . . . . . . . .33
86258 . . . . . . . . . . . . . . . . . . . . . . . . . 32 254120 . . . . . . . . . . . . . . . . . . . . . . . . 38 276919 . . . . . . . . . . . . . . . . . . . . . . . . .33
87228 . . . . . . . . . . . . . . . . . . . . . . . . . .39 254815 . . . . . . . . . . . . . . . . . . . . . . . . 38 282288 . . . . . . . . . . . . . . . . . . . . . 26, 39
87240 . . . . . . . . . . . . . . . . . . . . . . . . . .39 256228 . . . . . . . . . . . . . . . . . . . . . . . . 38 283167 . . . . . . . . . . . . . . . . . . . . . 30, 39
87417 . . . . . . . . . . . . . . . . . . . . . . . . . 40 256241 . . . . . . . . . . . . . . . . . . . . . . . . 38 350241 . . . . . . . . . . . . . . . . . . . . . . . . 47
87418 . . . . . . . . . . . . . . . . . . . . . . . . . 40 270781 . . . . . . . . . . . . . . . . . . . . . . . . 40 350242 . . . . . . . . . . . . . . . . . . . . . . . . 47
87419 . . . . . . . . . . . . . . . . . . . . . . . . . 40 270782 . . . . . . . . . . . . . . . . . . . . . . . . 40 350244 . . . . . . . . . . . . . . . . . . 24, 29, 47
90537 . . . . . . . . . . . . . . . . . . . . . . . . . 16 270982 . . . . . . . . . . . . . . . 32, 33, 34, 35 350245 . . . . . . . . . . . . . . . . . . . . . . . . 47
92544 . . . . . . . . . . . . . . . . . . . . . . . . . 39 271579 . . . . . . . . . . . . . . . . . . . . . . . . 37 350282 . . . . . . . . . . . . . . . . . . . . . . . . 47
92597 . . . . . . . . . . . . . . . . . . . . . . 31, 39 271605 . . . . . . . . . . . . . . . . . . . . . . . . 32 350283 . . . . . . . . . . . . . . . . . . . . . . . . 47
94553H . . . . . . . . . . . . . . . . . . . . . . . . 34 271606 . . . . . . . . . . . . . . . . . . . . . . . . 32 645006 . . . . . . . . . . . . 22, 24, 25, 27, 40
102781 . . . . . . . . . . . . . . . . . . . . . . . . 16 272180 . . . . . . . . . . . . . . . . . . 33, 34, 35

51
A Complete Line of Lubrication Solutions
and Industrial Pumping Products
Our automated systems dispense measured
amounts of lubricant at predetermined intervals.
Systems include Helios® and Duo-Matic® two-line
Automated Lubrication
systems, Centro-Matic®, Modular Lube® and
Quicklub® as well as ORSCO® precision oil lubrica-
tion. With our BearingSaver® program, we find the
best automated solution for you from our wide
range of systems for grease, fluid grease and oil.

General Lubrication
Lincoln has developed
specialized pumps and Industrial Pumping Sometimes a simple
pumping stations to approach is the best
handle the difficult job of solution. Our wide range
transferring thick fluids. From of products includes smaller,
the industry-best PileDriver III® self-contained automated
and PowerMaster III® pumps lubricators and general
and air motors to specialty lubrication equipment.
pumps, controls and mounting
accessories, Lincoln is the
preferred pumping system
for many tough applications.
Lincoln's global distribution network
is the best in the industry.
Whatever the service—evaluating your lubrication methods, installing a custom-engineered
system, or supplying top-quality manual lubrication products—your Lincoln distributor
makes certain you always get the very best value.
Systems House Distributors
Our systems house distributors offer the highest level of expertise available in the
industry. They can custom design a system with the exact combination of Lincoln
components you need. Then, they install the system in your plant with their knowledgeable
technicians or work with your personnel to make sure the job is done correctly. Each
distributor stocks a full inventory of pumps, metering devices, controllers, monitors and
accessories. Each continues to meet our stringent requirements for product, systems and
service knowledge. From Los Angeles to London, Boston to Bangkok, Lincoln’s top-of-the-
industry systems house distributors will be there when and where you need them.

For the nearest

authorized Lincoln
sales and service
representative, call:

Americas:
St. Louis, Missouri
314.679.4200
Fax: 800.424.5359
Europe/Africa:
Walldorf, Germany
49.6227.33.0
Fax: 49.6227.33.259
Asia/Pacific:
Singapore
65.6588.0188
Fax: 65.6588.3438

Lincoln Industrial Corp. Phone 314.679.4200 Form 442832 (09/10)

One Lincoln Way Fax 314.679.4359 © Copyright 2010
St. Louis, MO 63120-1578 www.lincolnindustrial.com Printed in U.S.A.