DYNACOLL 7150
43.13.640e / 08.20
Chemical composition
Solid, saturated, amorphous copolyester with high glass transition temperature.
Application
Manufacturing of reactive hot melt adhesives with fast setting properties.
Specification
Property Value Unit Test method
Hydroxyl number 38 – 46 mg KOH/g DIN EN ISO 4629-2
Acid number max. 2 mg KOH/g DIN EN ISO 2114
Typical data
Molecular weight 2600 - from Hydroxyl number
Softening point (R + B) 95 °C DIN ISO 4625
Glass transition temperature 50 °C DSC
Open time 1 s Evonik internal method
Viscosity at 130 °C 60 Pa s Parallel plate
Compatibility with other DYNACOLL copolyesters (1:1 blends)
Transparent: 7130, 7131, 7140, 7210, 7230, 7231, 7250, 7255, 7320, 7321, 7330, 7331,
7340, 7360, 7361, 7365
Cloudy: 7110
Opaque: 7111
Phase separation: 7380, 7381, 7390
Form supplied
200 kg drums.
Page 1/2
43.13.640e / 08.20
Storage Stability
When stored below 30 °C in closed containers the product remains stable for at least one year. In case of open
or improperly closed containers, there is a possibility of increased moisture from the atmosphere.
Safety and Handling
Please refer to our Material Safety Data Sheet.
Reactive Hot Melt
Typical data
Reaction product from DYNACOLL 7150 with 4,4-MDI (Diphenylmethane-4,4'-diisocyanate) in a ratio OH/NCO
= 1/2.2
Property Value Unit Test method
Softening point (R + B) 105 °C DIN ISO 4625
Open time <1 s Evonik internal method
Setting time <1 s Evonik internal method
Viscosity at 130 °C 400 Pa s Parallel plate
Tensile strength - N/mm2 DIN 53 504
Elongation at break brittle % DIN 53 504
Evonik Operations GmbH Evonik Corporation Evonik Specialty Chemicals
Paul-Baumann-Str. 1 Resource Efficiency (Shanghai) Co., Ltd.
45764 Marl 299 Jefferson Road 55, Chundong Road
Germany Parsippany, NJ 07054-0677, USA Xinzhuang Industry Park
PHONE +49 2365 49-02 PHONE +1 973 929-8000 Shanghai, 201108, PR China
FAX +49 2365 49-5030 FAX +1 973 929-8460 PHONE +86 21 6119-1028
FAX +86 21 6119-1254
Email
[email protected]www.evonik.com/adhesives-sealants
www.evonik.com/designed-polymers
Replaces leaflet 43.13.640e / 05.17 and all former issues
Marl, August 3, 2020
DYNACOLL is a registered trademark of Evonik Industries AG or one of its subsidiaries
This information and all further technical advice are based on our present knowledge and experience. However, it implies no liability or other
legal responsibility on our part, including with regard to existing third party intellectual property rights, especially patent rights. In particular,
no warranty, whether express or implied, or guarantee of product properties in the legal sense is intended or implied. We reserve the right to
make any changes according to technological progress or further developments. The customer is not released from the obligation to
conduct careful inspection and testing of incoming goods. Performance of the product described herein should be verified by testing, which
should be carried out only by qualified experts in the sole responsibility of a customer. Reference to trade names used by other companies
is neither a recommendation, nor does it imply that similar products could not be used.
Page 2/2
