Scribd
Upload
114 views2 pages

DYNACOLL® Terra 7640-EN

This document provides information on DYNACOLL Terra 7640, a liquid, saturated copolyester based on at least 75% renewable materials for manufacturing bio-based reactive hot melt adhesives. It lists the product's specifications, including a hydroxyl number of 27-34 mg KOH/g and acid number below 2 mg KOH/g. Compatibility with other DYNACOLL copolyesters is also provided. When blended with 4,4-MDI, the reactive hot melt adhesive has a softening point above 130°C, open time of several hours, and tensile strength of 10 N/mm2.

Uploaded by

LU CHUNHUI
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
114 views2 pages

DYNACOLL® Terra 7640-EN

This document provides information on DYNACOLL Terra 7640, a liquid, saturated copolyester based on at least 75% renewable materials for manufacturing bio-based reactive hot melt adhesives. It lists the product's specifications, including a hydroxyl number of 27-34 mg KOH/g and acid number below 2 mg KOH/g. Compatibility with other DYNACOLL copolyesters is also provided. When blended with 4,4-MDI, the reactive hot melt adhesive has a softening point above 130°C, open time of several hours, and tensile strength of 10 N/mm2.

Uploaded by

LU CHUNHUI
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DYNACOLL Terra 7640

preliminary
01.21

General discription

Liquid, saturated copolyester based on min. 75 % b.w. renewable materials.

Application

Manufacturing of bio-based reactive hot melt adhesives.

Specification

Property Value Unit Test method


Hydroxyl number 27 – 34 mg KOH/g DIN EN ISO 4629-2
Acid number max. 2 mg KOH/g DIN EN ISO 2114

Typical data

Molecular weight 3500 - calculated from Hydroxyl number


Glass transition temperature -40 °C DSC
Viscosity at 80 °C 4 Pa s DIN EN ISO 3219

Compatibility with other DYNACOLL copolyesters (1:1 blends)

Transparent: 7110, 7111, 7131, 7210, 7230, 7231, 7250, 7255, 7360, 7361, 7363, 7390
Terra EP 413.04, EP 424.02, EP 481.01
Cloudy: 7365
Opaque: 7320, 7381
Terra EP 413.02
Phase Separation: 7130, 7140, 7150, 7330, 7340, 7380
Terra 7530, 7540

Page 1/2
01.21

Form supplied

200 kg drums.

Storage Stability

When stored below 30 °C in closed containers the product remains stable for at least one year from delivery. In
case of open or improperly closed containers, there is a possibility of increased moisture from the atmosphere.

Safety and Handling

Please refer to our Material Safety Data Sheet.

Reactive Hot Melt


Typical data

Reaction product from DYNACOLL Terra 7640 with 4,4-MDI (Diphenylmethane-4,4'-diisocyanate) in a ratio
OH/NCO = 1/2.2
Property Value Unit Test method
Softening point (R + B) - °C DIN ISO 4625
Open time several hours s Evonik internal method
Setting time several hours s Evonik internal method
Viscosity at 130 °C 4 Pa s Parallel plate
2
Tensile strength 10 N/mm DIN 53 504
Elongation at break 1300 % DIN 53 504

Evonik Operations GmbH Evonik Corporation Evonik Specialty Chemicals


Paul-Baumann-Str. 1 Resource Efficiency (Shanghai) Co., Ltd.
45764 Marl 299 Jefferson Road 55, Chundong Road
Germany Parsippany, NJ 07054-0677, USA Xinzhuang Industry Park
PHONE +49 2365 49-02 PHONE +1 973 929-8000 Shanghai, 201108, PR China
FAX +49 2365 49-5030 FAX +1 973 929-8460 PHONE +86 21 6119-1028
FAX +86 21 6119-1254
Email [email protected]
www.evonik.com/adhesives-sealants
www.evonik.com/designed-polymers

Marl, January 12, 2021

DYNACOLL is a registered trademark of Evonik Industries AG or one of its subsidiaries


This information and all further technical advice are based on our present knowledge and experience. However, it implies no liability or other
legal responsibility on our part, including with regard to existing third party intellectual property rights, especially patent rights. In particular,
no warranty, whether express or implied, or guarantee of product properties in the legal sense is intended or implied. We reserve the right to
make any changes according to technological progress or further developments. The customer is not released from the obligation to
conduct careful inspection and testing of incoming goods. Performance of the product described herein should be verified by testing, which
should be carried out only by qualified experts in the sole responsibility of a customer. Reference to trade names used by other companies
is neither a recommendation, nor does it imply that similar products could not be used.

Page 2/2

You might also like