Data sheet 6AV7863-6MA00-2NA0
SIMATIC IFP1900 V2, 19" multi-touch display (16:9) with 1920x1080 pixel
resolution, built-in unit, for 24 V DC, display port/DVI interface, including
DP/USB cable 1.8 m, on the rear USB, neutral design
General information
Product type designation IFP1900 V2
Short designation SIMATIC IFP1900 V2
Display
Design of display TFT widescreen display, LED backlighting
Screen diagonal 18.5 in; 19"
Screen diagonal [cm] 47 cm
Display width 408.96 mm
Display height 230.04 mm
On Screen Display (OSD) configuration No; Adjustable by means of software
Number of colors 16 777 216; 24 bit
Viewing angle 178° x 178°
Resolution (pixels)
● Image resolution 1 920 x 1 080
● Horizontal image resolution 1 920 pixel
● Vertical image resolution 1 080 pixel
● Pixel size, horizontal 0.213 mm
● Pixel size, vertical 0.213 mm
General features
● Brightness/contrast 350 cd/m² / 1 000:1
● non-reflective and tempered mineral glass screen Yes
● Detachable from computer unit 5m
● Luminance 350 cd/m²
Backlighting
● Type of backlighting LED
● MTBF backlighting (at 25 °C) 50 000 h; At 25°C
● Backlight dimmable Yes; 0-100 %
Control elements
Control elements multi-touch screen
Input device
● Integrated mouse cursor control Yes; Also externally via USB
Touch operation
● Design as touch screen Yes; Projective-capacitive
● Design as multi-touch screen Yes; Projective-capacitive
● Monitor keyboard Yes; If supported by operating system
Installation type/mounting
Design Built-in unit
Front mounting Yes
VESA mounting Yes; VESA 100 x 100 integrated
Mounting in portrait format possible Yes
6AV78636MA002NA0 Subject to change without notice
2/22/2023
Page 1/3 © Copyright Siemens
Mounting in landscape format possible Yes
Built-in unit Yes; Portrait mode possible
maximum permitted forward tilt angle from vertical 35°
maximum permitted backward tilt angle from vertical 35°
Supply voltage
Type of supply voltage DC
Rated value (DC) 24 V; PELV / SELV floating
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Input current
Current consumption (rated value) 1.2 A
Current consumption, max. 1.5 A
Starting current inrush I²t 0.5 A²·s
Power loss
Power loss, typ. 29 W
Power loss, max. 35 W
Interfaces
Number of USB interfaces 2; USB 2.0 type A
USB on the rear Yes; 2x onboard
Connection for keyboard/mouse USB
Video interfaces
● DVI-D Yes
● DisplayPort Yes; Display port V1.2
Touch interfaces
● USB Yes
Degree and class of protection
IP (at the front) IP65
IP (rear) IP20
NEMA (front)
● Enclosure Type 4 at the front Yes
● Enclosure Type 4x at the front Yes
● Enclosure Type 12 at the front Yes
Standards, approvals, certificates
Certificate of suitability hazardous zone 2/22; shipbuilding
CE mark Yes
UL approval Yes; cULus, cUL
cULus Yes
FM approval Yes; Class I Div. 2
RCM (formerly C-TICK) Yes
EAC (formerly Gost-R) Yes
EMC CE, EN 55011, EN 61000-6-4, EN 61000-6-2
Use in hazardous areas
● ATEX Zone 2 Yes; Available soon
● ATEX Zone 22 Yes; Available soon
● IECEx Zone 2 Yes; Available soon
● IECEx Zone 22 Yes; Available soon
● FM Class I Division 2 Yes; Available soon
Marine approval
● Germanischer Lloyd (GL) Yes; Available soon
● American Bureau of Shipping (ABS) Yes; Available soon
● Bureau Veritas (BV) Yes; Available soon
● Det Norske Veritas (DNV) Yes; Available soon
● Lloyds Register of Shipping (LRS) Yes; Available soon
● Nippon Kaiji Kyokai (Class NK) Yes; Available soon
Ambient conditions
Ambient temperature during operation
● min. 0 °C
● max. 50 °C
Ambient temperature during storage/transportation
● min. -20 °C
● max. 60 °C
Altitude during operation relating to sea level
6AV78636MA002NA0 Subject to change without notice
2/22/2023
Page 2/3 © Copyright Siemens
● Installation altitude above sea level, max. 3 500 m
Relative humidity
● Operation, max. 90 %; no condensation
Vibrations
● Vibration load in operation 10 m/s²
● Vibration load during transport/storage 10 m/s²
Shock testing
● Shock load during operation 150 m/s²
● shock acceleration during storage/transport 250 m/s²
Mechanics/material
Enclosure material (front) With neutral design
● Aluminum Yes
● Aluminum casting Yes
● Glass Yes; at front
Enclosure material (rear) aluminum
Dimensions
Width of the housing front 464 mm
Height of housing front 294 mm
Mounting cutout, width 448 mm; Tolerance: +1 mm
Mounting cutout, height 278 mm; Tolerance: +1 mm
Overall depth 63.4 mm
Weights
Weight (without packaging) 5 kg
Weight (with packaging) 7 kg
last modified: 9/21/2021
6AV78636MA002NA0 Subject to change without notice
2/22/2023
Page 3/3 © Copyright Siemens
