Cricket Ground Equipment Quotation
Cricket Ground Equipment Quotation
LIBERAL
QUOTATION
22- QUEENS ROAD LAHORE, PAKISTAN
Ph. No: 042 36362453 0333 4253430
Email: s tl i [email protected], Website: i [email protected]
Date: 17-8- 23 Ref No: CP-6723
Thank you for your valued inquiry. Herewith we are pleased to submit our most competitive price for the ground equipment
mentioned above for your kind consideration.
Sr #. Item Description
1. Auto Turf Roller 2000 kg ABOUT:
Turf Auto Roller is the most tried and extensively used roller produced by
the pioneer of heavy engineering industry in Pakistan. While, Turf Auto
Roller has been built with emphasis on quality and durability. Moreover,
its smooth surface is specially designed for cricket turfs. Whereas, it has
variable speed and hydraulic transmission. In comparison to that it is easy
to operate. In addition to power and manual steering function provides
grounds men to drive smoothly and comfortably
TECHNICAL SPECIFATION:
Weight Unballasted: 2000 KG
Engine: Powered by 18 H.P Petrol Engine
Hydraulic function: Fitted with complete Hydraulic transmission system
includes hydraulic motor, hydraulic pump, hydraulic tank and safety
valves.
Hydraulic pump: Sundstrand Hydraulic Transmission Pump (Series: PV18)
Hydraulic motor: Danfoss OMT 400 hydraulic motor
Starting Option: Electric Start System with ignition switch /Air Start
System).
Overall Dimensions (H x L x W): 52.5’’ x 100’’ x 43’’
Rolling Width: 4 feet dual roller drums
Rolling Diameter: 2 feet (610mm) with rounded shape edges to avoid
lines in pitch during rolling.
Working Speed: Moves at speed 7.5 mph or 12 Km/h (for Forward and
Reverse) and also includes option for variable speed control.
Ground Pressure: Unballasted: 7.6 kg/cm2 (706 kg/m)
1|P a g e
Date: 17-8- 23 Ref No: CP-6723
TECHNICAL SPECIFATION:
Weight: Unballasted: 1000 kg or 500 kg
Transmission System: Driven electric gear motor 5.H.P
Controls: Forward, Brake & Reverse control through control panel
attached on handlebar
Rolling Width: 3ft
Rolling Diameter: 32in -36in (1000 kg)
22in -24in (500 kg)
Height Adjuster: Front and Rear height adjuster for uneven surface.
Edges of Roller: Round shape edges to avoid lines or creases to cricket
turf pitches or synthetic non-turf mats during rolling
Ball bearings: Ball bearing attached on both sides of the roller drum
3. Walk behind Roller( Petrol engine driven) Weight: Unballasted: 1000 kg or 500 kg
Engine: Driven by 10 HP petrol engine.
Transmission System: Fitted with complete Hydraulic transmission
system includes hydraulic motor, hydraulic pump and hydraulic tank.
Controls: Forward, Brake & Reverse control through si ngle mechanical
lever.
Rolling Width: 3 ft.
Rolling Diameter: 32in -36in (1000 kg)
22in -24in (500 kg)
Height Adjuster: Front and Rear supporting rollers for height adjustment
in case of uneven surface.
Ball bearings: Ball bearing attached on both sides of the roller drum.
Edges of Roller: Round shape edges to avoid lines or creases to cricket
turf pitches or synthetic non-turf mats during rolling.
Working speed: 0-2 km/hr
4. Manual Roller 1000 kg
ABOUT:
If you're in need of a hand roller either heavy or light duty manual roller
for the first class cricket pitch preparation or maybe for smoothing
natural or non-natural cricket turf pitches between innings, or perhaps
to squeeze moisture from your natural turf and synthetic cricket pitches
or practice nets to speed them up, or maybe to even out the surface
under the carpet. Whereas it utilizes in a similar way to an identical
roller drum to those used for auto wicket roller.
TECHNICAL SPECIFATION
Weight Unballasted: 1000 KG
Width: 48 in
Diameter 34 in-36 in
Handle: Fitted with double action balanced handle and can be move
both ways, i.e. forward and reverse.
Ball bearings: Ball bearing attached on both sides of the roller drum.
2|P a g e
Date: 17-8- 23 Ref No: CP-6723
TECHNICAL SPECIFATION:
Main Frame Main body made up of mild steel pipe, angle, and angle
section frame with anti -rust paint.
Dimensions (L x W X H) 10’ x 7’ x 4’ height
Working width 6’ twin roller barrel
Weight Approx. 850 kg
Transmission system Hydrostatic transmission system with pump and
motor which enables forward and reverse variable speed transmission
for maximum efficiency and eas e of use
Hydraulic Controls Hydraulic power steering easily operated by single
lever operation for Forward, Reverse and braking, Whereas hydraulic
drive of rear drum
Parking Jacks Hydraulic operated. Can easily be lifted & parked from the
ground level. No need for any manual labour.
Engine: Powered by 18 H.P twin cylinder Kohler Engine featuring Less
vibration, less noise.
Roller Drums: Fully galvanized, anti -corroded drums are 10mm
perforated holes which can soak water faster without overloading the
Engine.
Size of Absorption Rollers Dual perforated barrel size; Length: 6’,
Diameter 2’
Speed: Variable speed with hydrostatic transmission up to 20 Km/h
3|P a g e
Date: 17-8- 23 Ref No: CP-6723
Water removal from surface Can remove 1’’(25mm) water surface per
pass
Water storing tank capacity 150 liters x two tanks.
Water Discharge System Water pump With Motor
Max pump rate Approx. 34,000 L/hr
TECHNICAL SPECIFATION:
Manual sucker will remove 25mm surface water.
Single perforated Barrel.
Works on all surfaces, Turf, synthetic grass, sand, clay.
Guarantee play will start on time
TECHNICAL SPECIFATION:
Type Petrol engine heavy duty reel mower
Cutting width: 91cm (36’’)
Cutting system: Cylinder
Number of blades: Six-Blade cylinder hardened and tempered at
45H.R.C mounted on graspable bearings.
Engine: 13 H.P Petrol Engine
Height of cutting: 2.5 mm – 45 mm
Height of cut adjustment: Fully variable with support stand
Handlebars: Variable height positions. Bal e-bar for cylinder with
coupling system.
Rear roller: made up of steel in three sections, diameter 10 ‘’ and fitted
with bearings on both sides.
Front roller: made up of steel with sealed bearings
Bottom blade: manufactured from in 11 hardened and tempered to 45
HRC optional 4 mm face blade.
Grass box: Impact resistant with new customized round shape.
4|P a g e
Date: 17-8- 23 Ref No: CP-6723
TECHNICAL SPECIFATION:
Type Petrol engine fine cutting reel mower
Cutting width: 51cm (20’’)
Cutting system: Cylinder
Number of blades: ten- Blade cylinder hardened and tempered at
45H.R.C mounted on grease able bearings.
Engine 5.5 H. P Petrol Engine
Height of cutting: 2.4 mm – 19 mm (1/10’’–3/4’’)
Rate of cut: 196 cuts per meter / 5 cuts per inch.
Height of cut adjustment: Fully variable with support stand.
Handlebars: Variable height positions. Bale-bar for cylinder with
coupling system.
Rear roller: made up of aluminium/steel in two sections, diameter 8 ‘’
with fitted with bearings on both sides.
Front roller: made up of steel with ball bearings
Bottom blade: manufactured from in 11 hardened and tempered to 45
HRC optional 4 mm face blade.
Grass box: Impact resistant with new customized round shape
TECHNICAL SPECIFATION:
Cutting/Mowing width: 60’’
Blades: 3Cutting rate: Approx. 3 acres/h, (1.2 hectares/h) @ 5 mph (8
km/h)
Discharge: sideways
Cutting height: ranges from approx. 0.5 - 6 inches
Deck: Heavy duty fully baffled heavy duty deck
Belts & Type: Two heavy duty reinforced belts with 1x3 gear drive.
P.T.O Shaft: Adjustable coupling with Heavy duty shielded PTO shaft.
Spindles: Featured with ball bearings and cast iron housing provides
balanced performance and accuracy
Wheel Arms: Stamped steel reinforced wheel arm attached by bolts for
maintaining a consistent cutting height.
5|P a g e
Date: 17-8- 23 Ref No: CP-6723
TECHNICAL SPECIFATION:
Material:
PVC coated
Weight: 600 gram per sft
12. Canvas Pitch Covers Customer can be availed with high quality cricket pitch cover us that
are available in customized range of sizes. These light weighted sheets
are supplied on time and with assured and reliable quality. Our team of
experts is dedicated to meet the customers’ all requirements. Its easy
handling and durability make it widely appreciated among the
customers across the country. Customers can avail two type covers
materials.
TECHNICAL SPECIFATION:
Material: Canvas
TECHNICAL SPECIFATION:
6|P a g e
Date: 17-8- 23 Ref No: CP-6723
TECHNICAL SPECIFATION:
Thickness: 2 in
Color: Off White
Length: 1500ft
TECHNICAL SPECIFATION:
Three wheel
Made of iron pipe and iron sheet
7|P a g e
Date: 17-8- 23 Ref No: CP-6723
7 ft (Length) x 4 ft (Width)
TECHNICAL SPECIFATION:
Size 5” x 3”
Made by 1-1/2” Iron Angle
Galvanized Iron Sheet 20 gauge
Fitted with Ice Box Local
Four tires & tube complete
TECHNICAL SPECIFATION:
Working Depth Adjustable from 1 inch above ground to 0.875 into the
ground
DIMENSIONS
Length (in.) 51 inches
Width (in.) 27 inches
Height (in.) 36.5 inches
Weight (lbs.) 108 w/out reel
DRIVE SYSTEM
Tire Size 8 x 1.75 semi-pneumatic
ENGINE 5.5hp petrol , single cylinder, air cooled, 4 stroke OHV petrol
8|P a g e
Date: 17-8- 23 Ref No: CP-6723
TECHNICAL SPECIFATION:
Working width: 68 inch
Max working depth: 6 inch
Weight: 575 kg
Hole distance with 12 mm tines: 55 mm
Hole distance with 12 x 6 tines: 2-1/8 inch
Hole spacing driving distance direction: 25 – 125 mm
Hole spacing distance driving direction: 1 – 5 inch
Max diameter-solid tine: 12 x 150 mm
Max diameter-solid tine: 1/2 x 6 inch
Max diameter hollow tine: 19 x 150 mm
Max diameter hollow tine:3/4 x 6 inch
Min tractor hp required 28 HP
Min lifting capacity 700 kg
Max capacity with spacing 2-12 ft2hr: 29500 ft²/hr
Lifting system: Three-point hitch
Rpm max: 500 rpm
Dimensions:76 x 30 x 42 inch
9|P a g e
Date: 17-8- 23 Ref No: CP-6723
DIMENSIONS
Extended 45ft x 12ft x 12ft
MATERIALS
• Framework & side corner plates manufactured from heavy duty 2in
square mild steel tubing
• Steelwork is galvanized treated for long life, it’s 100% resistant to rust
& corrosion
• Heavy duty 3mm thick, 48mm knotted, HDPP test grade cricket netting
MISCELLANEOUS
• Suitable for all ages and player standards up to county/test grade
• Can be used and moved on all playing surfaces
(grass/artificial/concrete)
• Heavy duty design, 100% weatherproof, can be left outside
• Frame colour = white
• Net colour = white, blue, green, black
• steel corner plates bolt together for superior strength & reliability
• Net is very strong, easy to hang, 100% weather/rot proof and UV
treated for long life
• Puncture proof 360° polyurethane castor wheels complete with
push/pull bar for easy movement of cage vi a 1 person
• Twine break strength of netting = 130kgs (286lbs)
• Supplied with all-weather, UV treated plastic ties for quick, easy and
tidy net attachment
• Hinged steel gate with lock that opens rear of cage up for wicket
keeping practice
• Complete with high tensile steel nuts, washers and bolts
• Weight: Approx 175 kg
10 | P a g e
Date: 17-8- 23 Ref No: CP-6723
Payments:
Payment terms are, 50% advance for order confirmation and 50% before delivery i.e. goods are ready to delivery time.
Payment can be made by bank transfers like Cheques, SWIFT wire transfer, money o rder, or through other options.
Delivery Policy:
Standard delivery time depend upon the quantity of order
Transportation Cost:
All Prices are without transportation charges.
We offer different conditions and prices depend upon the mean of transportations of goods. While the Modes of
transport depend upon the customers wish and should be finalized by the customers.
For
Liberal Lawn Mowers
11 | P a g e