User Manual

Functions and Specification

AC Manager 5
AC Manager 5 is a central controller that can manage individual or group of maximum of 8192 units in one space.
AC Manager 5 can monitor or control the units installed in each room of a building from a place such as building management office or school administration office.

[AC Manager 5 Functions]

Environment Setting Function using External Buttons

Web Server Embedded Function

Devices that can be interfaced

[AC Manager 5 Components]

Components

[Name of Each Part of AC Manager 5]

Name of Each Part

[AC Manager 5 Hardware Specification]

Hardware Specification

WARNING
This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.
 User Manual

Web Server Embedded Function

Without installing a separate program, you can use web browser to input IP address of AC Manager 5 in the address window to access AC Manager 5 web server for device
control and monitoring.

Control of Max. of 8192 air conditioner units (32 central controller)

Error and Operation Status Monitoring

Peak/Demand Power Control

System Setting Function

 User Manual

Devices that can be interfaced

The devices of AC Manager 5 that can be interfaced are as follows.

Device AC Manager 5

AC Ez(Touch) o

Simple Central Controller o

AC Manager 5 o

Air conditioner o

ERV o

Heating o

AHU o

o
Chiller
(with chiller option S/W applied)

EXP. I/O o

Air purifier o
 User Manual

Components
The components of the following figure are included in AC Manager 5 package box.

Open the package box, and check if all corresponding components are included.

Note

Components or options may differ from the actual product picture.

Caution

The SD card provided by our company is for backup and restoration of data when service is provided by qualified service engineer. Do not use on other purpose.
 User Manual

Name of Each Part

AC Smart 5 is composed as the following form.

No. Category Contents

• 10.2 inch LCD control panel

① Touch Screen
• AC Smart 5 control and information display

② SD Memory Slot SD card memory slot

③ DO Port 2CH DO port

④ DI Port 2CH DI port

2CH 485 port (CH1: AHU, CH2: devices other than AHU)
⑤ RS-485 Port • CH1 default setting : LGAP_AHU / CH2 default setting : LGAP I
• To change default setting, refer to the contents of 'Device Setting - AC Smart 5 Editing' in the user manual provided in [Help] category.

⑥ 12 V Input Port 12 V power input port

⑦ LAN Port LAN cable port for Ethernet connection (100Mbps/10Mbps)

⑧ 24 V~ Input Port 24 V~ power input port

Micro USB Port (for Port for upgrading software and storing floor plans, reports, statistics, etc. (It needs cable to connect USB memory sticks, supporting USB 2.0 or
⑨
service) later)

⑩ Mini USB Port PC port for debugging software

• If you press less than 9 seconds, AC Smart 5 LCD backlight control

⑪ Power ON/OFF • Push 10 seconds or more to reset AC Smart 5.
• If you are not going to use AC Smart 5 for a long time, it is recommended that the product be turned off to prolong the LCD backlight's life.
 User Manual

Hardware Specification
AC Manager 5 hardware specification is as follows.

Category Contents

Boundary of usage temperature 0 °C ~ 40 °C

Rated Voltage DC 12V

Rated Current Max 2.3A

• Ethernet 10 / 100 BASE-T

• USB : USB Host (SW upgrade, data backup)
Communication ports • mini USB : Device (Debug)
• RS-485 communication ports 4EA
• SD card slot (For data backup)

External input/output ports DI 2 EA, DO 2 EA (Reserved)

LED 27 EA (power and communication status)

LCD 20 ×4 Character-LCD (network environment setting and information display)

 User Manual

Installation and Setting

It describes AC Manager 5 Installation and Setting Method.

[Installation Order]

Order of AC Manager 5 Installation

[Installation and Cable Connection]

Fixing to wall

Mounting on DIN RAIL

Connecting Ethernet cable (LAN cable)

[LCD Environment Setting]

LCD Environment Setting

① Network Address Setting[Network Info]

Network Address Setting Method

IP Address Setting

Using Dynamic IP with DHCP

Check the access

② [Function]

Software Update

DB back up

DB recover
 User Manual

Order of Installation
 User Manual

Connect AC Smart 5
You can install AC Smart 5 and its cables as follows.

1. Choose a space for AC Smart 5.

- Prior to securing AC Smart 5, check if the space is suitable for installing AC Smart 5, an RS485 cable, power cord, and an Ethernet cable.

2. Secure the back panel of AC Smart 5 to the wall under which the RS485 cable is located.

3. Extend the RS485 cable through the top opening of the back panel.

4. Connect the RS485 cable,which is located behind the AC Smart 5, to the RS485 terminal.

CAUTION
The RS485 cable has polarity, so be careful about keeping polarity when connecting the cables.

5. To use the network functions (email transmission and web control) provided by AC Smart 5, connect an Ethernet cable to the LAN port on the back of AC Smart 5.
6. Connect the power.
• For global models
- On the back of AC Smart 5, connect the power adapter to the power port.

The adaptor is not provided with the AC Smart 5 package sold in the U.S.

NOTE
You can hang the power cord on the power cord hanger located below the power port.

• For US models
- At the bottom of AC Smart 5, connect the power cord to the power port.

NOTE
In some countries, except for the U.S, you can connect the DC 12 V power to the AC Smart 5 by using the provided adapter. If necessary, connect the AC 24
V power to the AC Smart 5.

7. After attaching the hook on the top of the main body to the top of the rear panel installed on the wall, please push the top of the main body unit forward for firm
attachment.
CAUTION
Please screws 2 points from the bottom of the unit to prevent from falling.

NOTE
Product removal
After removing 2 screws from the bottom of the body, slightly pull the body using the flatblade screwdriver and lift up the body to remove the product.
 User Manual

Usage (PC)
LogIn / LogOut

Account

Dashboard

[Control]

Device Control

Schedule Control

InterLocking

Time limit control

[Energy]

Energy Usage

Energy Navigation

Peak demand control

[History]

Operation History

Energy Navigation History

Operation Trend

Cycle

[Setting]

Device setting

Group Setting

System Setting

Network Setting

Error Notice Setting

Administrator Setting

Additional User Setting

 User Manual

You can access to the product with IP address in internet address window to use various central control functions.

Note

Chrome browser is recommended for web control.

For access to web, IP address needs to be set.

At the time of the first access, you need to set password of the manager account.

On every 90 days, popup is provided to change password.

For personal information protection and safe service usage, please change password periodically.

LogIn
Login method is as follows.

1. Please input IP address of the product in the internet address window.

2. Input ID and password in the login window and click [Login] button.

LogOut
Logout method is as follows.

1. In menu, click [Account] menu.

2. In Account information window, click [Logout] button.

 User Manual

Account
You can check the information of the currently logged in account.
 User Manual

You can check the current operation status and energy usage trend of the equipment installed in the product.

Operation status
It describes the dash board's current operation status tab composition and functions.

No. Category Contents

Check operation status (ON/OFF/Error) of the equipment installed in the product

[group]
Checking of operation status of each management group designated by user

① Operation status [device]

Check operation status of each device designated by the user

All indoor units and ERV ON / OFF control

All indoor units and ERV ON / OFF control
When exception device is registered, it is excluded from overall control

② Environment status Checking of average indoor temperature, Max./Min. indoor temperature and group

③ Today's Schedule Checking today's schedule list

④ InterLocking Checking of InterLocking list

[Widget setting]

You can select the monitoring setting through each widget of the dash board.

Operation status Widget

Energy
It describes the dash board's energy tab composition and functions.
 No. Category Contents

① Energy usage trend Checking of daily, monthly, and yearly trend of electricity/gas usage amount

② Electricity usage amount Checking of electricity usage amount accumulation, forecast, and goal

③ Gas usage amount Checking of gas usage amount accumulation, forecast, and goal

④ Total energy usage amount Checking of total energy usage amount accumulation, forecast, and goal

⑤ Continuous operation time Check continuous operation time ranking of indoor unit

⑥ Energy Navigation Check energy navigation status

[Widget setting]

You can select the monitoring setting through each widget of the dash board.

Energy usage trend Widget

Electricity usage amount Widget

Gas usage amount Widget

Total energy usage amount Widget

Environment status
It describes the composition and functions of dash board environment status tab

No. Category Contents

① CO₂ monitoring Check CO₂ status of registered ERV

② Comfort Level Monitoring Check registered indoor unit's pleasantness status

Check registered indoor unit, air purifier's fine dust status

③ Fine dust monitoring
Fine dust is classified to PM10, PM2.5, and PM1.0, and it indicates each status and concentration
 User Manual

Operation status Widget

You can set the group to monitor the operation status.

1. In the left menu tab, click [Dashboard] > [Operation status] menu.

The current operation status screen is displayed.

2. Click the current operation status screen's button.

The Widget setting screen is displayed.

3. Select the group to monitor the operation status.

4. When selection is completed, click [Apply] button.

 User Manual

Energy usage trend Widget

You can select the standard for energy usage amount trend monitoring collection.

1. In the left menu tab, click [Dashboard] > [Energy] menu.

The energy screen is displayed.

2. Click the energy usage trend screen's button.

The Widget setting screen is displayed.

3. Select the collection standard(Daily/Monthly/Yearly).

4. When selection is completed, click [Apply] button.

 User Manual

Electricity usage amount Widget

You can select the standard for the electricity usage amount collection standard.

1. In the left menu tab, click [Dashboard] > [Energy] menu.

The energy screen is displayed.

2. Click the electricity usage amount screen's button.

The Widget setting screen is displayed.

3. Select the collection standard(Monthly/Yearly).

4. When selection is completed, click [Apply] button.

 User Manual

Gas usage amount Widget

You can select the standard for gas usage amount collection.

1. In the left menu tab, click [Dashboard] > [Energy] menu.

The energy screen is displayed.

2. Click the gas usage amount screen's button.

The Widget setting screen is displayed.

3. Select the collection standard(Monthly/Yearly).

4. When selection is completed, click [Apply] button.

 User Manual

Total energy usage amount Widget

You can select the display and collection standard for the total energy usage amount.

1. In the left menu tab, click [Dashboard] > [Energy] menu.

The energy screen is displayed.

2. Click the total energy usage amount screen's button.

The Widget setting screen is displayed.

3. Select the display standard(kgCO₂/kgoe) and the collection standard(Monthly/Yearly).

4. When selection is completed, click [Apply] button.

 User Manual

Device Control
It describes the method to control the device and to monitor the device status.

[Screen and Icon]

Screen Structure and Function

Device Icon

[Control Window]

Control of Each Device

Device Information

[Control/Monitoring]

Control

Monitoring

[Drawing]

Edit Drawing

Delete Drawing
 User Manual

Screen Structure and Function

1. In the left menu tab, click [Control] > [Device control] menu.

The device control screen is displayed.

No. Category Contents

① Main Menu Main Menu Tab

② Group List Check control group

③ Group Information Group name and group location

④ Operation status Check the devices' current operation status (ON/OFF/Error)

⑤ Filtering Device category and device status filtering

Select viewing method of device icon

: Big

⑥ Viewing method : Small

: List

: Drawing

Select the sorting method of the device

Name
⑦ Sorting device Device/Name
Device/Addr.
Operation

⑧ View folder Check the lower level group category of the current group when it is checked

⑨ Multi-select Select multiple devices when it is clicked

⑩ Device section Check the information of the devices set in the group

Management/installation group
1. Group

- management group set for convenience

2. Installation

- Provides the information of actually connected device

 User Manual

Device Icon
You can check important information of individual devices with icon.

1. Big icon

No. Category Contents

① Device status indicating icon Lock status, schedule, occupied, peak control, Filter replacement alarm, Oil replacement alarm, air cleaning

② Device Icon Check device icon

③ Fan speed Check device's Fan speed

Check fine dust status

④ Fine dust status
Blue (good), Green (normal), Orange (bad), Red (very bad)

⑤ Current temperature Check current temperature

⑥ Mode Check mode

⑦ Set temperature Check set temperature

⑧ Set temp range Check upper limit/lower limit temperature

⑨ Device name Check device name

Device status indicating icon

Icon Contents

Lock

Schedule

Occupied

Peak control

Filter replacement alarm

Oil replacement alarm

Air cleaning

Ionizer

Airy quality sensor

2. Small icon

- Check device icon/operation/mode/device name

3. View list

- indication of attribute of the device in the group (device name, operation status, operation mode, current temperature, set temperature, error code, ACP address, outdoor
unit addres, device address, etc.).
 User Manual

When a devices selected in the device section, control window is created in the right side as in the following screen. You can control the selected device through the control
window.

Note

The detail control boundary for each device may be different from the actual device, so make sure to refer to the corresponding device's manual.

Chiller interface is an optional function, and you need to separately purchase the option for chiller interface.

ACS I/O devices may have different control tool name, unit, upper limit, lower limit, etc. according to the setting.

Control of Each Device

Outdoor Unit

IDU
IDU (2Set)

ERV

ERV DX

Heating

AHU

Scroll chiller

Screw chiller

Turbo chiller

Absorption Chiller

DOKIT

DO

AO

Air purifier
 User Manual

Outdoor Unit

Category Contents

Outdoor unit capacity control Press [▼] button to set operation rate (%)

Smart load control function Press [▲]/[▼] button to set smart load control stage (0stage, 1stage, 2stage, 3stage, 4stage)

Low noise operation [Set/Clear] button: outdoor unit low noise operation Set/Clear

Defrost mode Press [▲]/[▼] button to set defrost mode stage (0stage, 1stage, 2stage, 3stage)

ODU Refrigerant Noise Reduction setting Press [▲]/[▼] button to set outdoor unit refrigerant noise reduction stage (0stage, 1stage, 2stage)

Note

In the central controller, if 'outdoor unit low noise operation' is used, in the installed indoor unit's remote controller, you need to set [Installer setting] > [Low
noise mode] to 'ODU'. (Default value 'ODU')
 User Manual

IDU

Category Contents

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation

[COOL] button: Swtiches to cooling mode

[HEAT] button: Switches to heating mode
[FAN] button: Air purification operation. When FAN is selected, set temperature is not applied to the device
Mode
[DRY] button: Removes moisture during rainy season or when humidity is high. When DRY is selected, set temperature is not
applied to the device
[AUTO] button: Switches to automatic mode

Air cleaning control only for air cleaning function supporting indoor unit
Air cleaning single operation
1) In indoor unit stop state, in case of air cleaning [Set], air cleaning single operation with wind only (automatic wind)
(During air cleaning single operation, mode lock and wind amount lock are not checked)
2) During air cleaning single operation, in case of operation [OFF] or air cleaning [Clear], air cleaning is cancelled to previous
mode and previous wind amount
Air cleaning (But, in case of mode or wind amount control together, control is done with controlled mode and wind amount)
Air cleaning additional operation
1) In indoor unit stop state, in case of operation status [ON] and air cleaning [Set], in current mode, air cleaning additional
operation
2) In indoor unit operation state, in case of air cleaning [Set], in current mode, air cleaning additional operation
3) During air cleaning additional operation, in case of operation [OFF], operation stops
4) During air cleaning additional operation, in case of air cleaning [Clear], air cleaning is cancelled

Set temperature Press [▲]/[▼] button to set the desired temperature

Wind strength setting

[LOW] button: Set the fan speed to slow
Fan speed [MED] button: Set the fan speed to normal
[HIGH] button: Set the fan speed to fast
[AUTO] button: [LOW]-[MED]-[HIGH] automatic switching

Swing [Set/Clear] button: Set/Clear the Swing function

When user set the desired temperature individually, the desired temperature outside the designated temperature boundary
Set temp range
 cannot be set

Human detection mode - ON/OFF learned power Only for human detection mode - supporting indoor unit, human detection mode - control
saving [Set/Clear] button: human detection mode - ON/OFF learned power saving Set/Clear

Human detection mode - Temperature power Only for human detection mode - supporting indoor unit, human detection mode - control
saving [Set/Clear] button: human detection mode - temperature power saving Set/Clear

Human detection mode - Unoccupied time Only for human detection mode - supporting indoor unit, human detection mode - control
setting(minute) Set empty decision time to 5, 10, 15, 30, 60, or 90 min.

Only for human detection mode - supporting indoor unit, human detection mode - control
Human detection mode - Direct wind
[Set/Clear] button: human detection mode - direct wind Set/Clear

Only for human detection mode - supporting indoor unit, human detection mode - control
Human detection mode - Indirect wind
[Set/Clear] button: human detection mode - indirect wind Set/Clear

[Set/Clear] button: Comfortable Power Saving function Set/Clear

Comfortable Power Saving You can press [▲]/[▼] button to set stage
Only when indoor unit is in cooling operation, Comfortable Power Saving control is possible

Filter replacement alarm [Clear] button: in case of filter replacement alarm, it cancels filter replacement alarm

HardLock [Set/Clear] button: Set/clear HardLock so that user cannot control any function with individual remote controller

Mode lock [Set/Clear] button: Set/clear lock so that user cannot control mode setting with individual remote controller

Fan lock [Set/Clear] button: Set/clear lock so that user cannot control Fan speed setting with individual remote controller

TempLock [Set/Clear] button: Set/clear lock so that user cannot control temperature setting with individual remote controller

It is a function to automatically switch to cooling operation if indoor temperature exceeds upper limit temperature, to heating
operation if it is less than lower limit temperature, and to wind only operation if it is between upper limit temperature and lower
Auto change over(Occupied)
limit temperature (supported only in outdoor unit with both cooling/heating)
[Set/Clear] button: Set/clear Auto change over(Occupied)

Lower /Upper temp. Auto change over(Occupied)'s lower limit temperature and upper limit temperature setting

Select the Fan speed value to set in the indoor unit during Auto change over(Occupied) operation
[LOW] button: Set the fan speed to slow
Auto change over(Occupied) Fan speed [MED] button: Set the fan speed to normal
[HIGH] button: Set the fan speed to fast
[AUTO] button: [LOW]-[MED]-[HIGH] automatic switching

Function to maintain the temperature of the space where the device is installed in certain boundary (Only supported by
Setback(UnOccupied) cooling/heating simultaneous type outdoor unit)
[Set/Clear] button: Set/clear the Setback(UnOccupied)

Cool start Press [▲]/[▼] button to set the cooling operation start temperature(21°C~40°C)

Heat start Press [▲]/[▼] button to set the heating operation start temperature(1°C~20°C)
 User Manual

IDU (2Set)
When 2Set function supporting outdoor unit/indoor unit/remote controller are used and in [Setting] > [Installing], if ACP''s 2Set automatic mode is selected as IDU, indoor
unit 2Set control window is generated on the right side as in the following screen.

Category Contents

[ON] button: Starts the device operation

Operation
[OFF] button: Stops the device operation

[COOL] button: Swtiches to cooling mode

[HEAT] button: Switches to heating mode
[FAN] button: Air purification operation. When FAN is selected, set temperature is not applied to the device
Mode
[DRY] button: Removes moisture during rainy season or when humidity is high. When DRY is selected, set temperature is not
applied to the device
[AUTO] button: Switches to automatic mode

Air cleaning control only for air cleaning function supporting indoor unit
Air cleaning single operation
1) In indoor unit stop state, in case of air cleaning [Set], air cleaning single operation with wind only (automatic wind)
(During air cleaning single operation, mode lock and wind amount lock are not checked)
2) During air cleaning single operation, in case of operation [OFF] or air cleaning [Clear], air cleaning is cancelled to previous
mode and previous wind amount
Air cleaning (But, in case of mode or wind amount control together, control is done with controlled mode and wind amount)
Air cleaning additional operation
1) In indoor unit stop state, in case of operation status [ON] and air cleaning [Set], in current mode, air cleaning additional
operation
2) In indoor unit operation state, in case of air cleaning [Set], in current mode, air cleaning additional operation
3) During air cleaning additional operation, in case of operation [OFF], operation stops
4) During air cleaning additional operation, in case of air cleaning [Clear], air cleaning is cancelled

Function to set the space with the corresponding indoor unit as occupied or empty
Occupancy [Occupied] button: occupied setting
[Unoccupied] button: empty setting

Cooling set temperature Press [▲]/[▼] button to set cooling set temperature

Heating setting temperature Press [▲]/[▼] button to set heating set temperature
Cooling lower limit/upper limit temperature Cooling lower limit temperature and upper limit temperature setting

Heating lower limit/upper limit temperature Heating lower limit temperature and upper limit temperature setting

Wind strength setting

[LOW] button: Set the fan speed to slow
Fan speed [MED] button: Set the fan speed to normal
[HIGH] button: Set the fan speed to fast
[AUTO] button: [LOW]-[MED]-[HIGH] automatic switching

Swing [Set/Clear] button: Set/Clear the Swing function

Human detection mode - ON/OFF learned Only for human detection mode - supporting indoor unit, human detection mode - control
power saving [Set/Clear] button: human detection mode - ON/OFF learned power saving Set/Clear

Human detection mode - Temperature power Only for human detection mode - supporting indoor unit, human detection mode - control
saving [Set/Clear] button: human detection mode - temperature power saving Set/Clear

Human detection mode - Unoccupied time Only for human detection mode - supporting indoor unit, human detection mode - control
setting(minute) Set empty decision time to 5, 10, 15, 30, 60, or 90 min.

Only for human detection mode - supporting indoor unit, human detection mode - control
Human detection mode - Direct wind
[Set/Clear] button: human detection mode - direct wind Set/Clear

Only for human detection mode - supporting indoor unit, human detection mode - control
Human detection mode - Indirect wind
[Set/Clear] button: human detection mode - indirect wind Set/Clear

[Set/Clear] button: Comfortable Power Saving function Set/Clear

Comfortable Power Saving You can press [▲]/[▼] button to set stage
Only when indoor unit is in cooling operation, Comfortable Power Saving control is possible

Filter replacement alarm [Clear] button: In case of filter replacement alarm, it cancels filter replacement alarm

HardLock [Set/Clear] button: Set/clear HardLock so that user cannot control any function with individual remote controller

Mode lock [Set/Clear] button: Set/clear lock so that user cannot control mode setting with individual remote controller

Fan lock [Set/Clear] button: Set/clear lock so that user cannot control Fan speed setting with individual remote controller

TempLock [Set/Clear] button: Set/clear lock so that user cannot control temperature setting with individual remote controller

Note

2set automatic mode

Only with 2Set automatic mode supporting indoor/outdoor air, the corresponding function can be used. (For whether each device supports 2Set, please
refer to the manual of the corresponding device.)

Override is a function that can be set from remote controller. For override function related contents, please refer to remote controller manual.

In 2Set automatic mode, along with Auto icon, product's actual operation mode (cooling, heating) status is displayed.

Occupancy

If occupancy sensor is interlinked to indoor unit, setting from the central control has priority over the corresponding occupancy sensor. For occupancy
sensor related contents, please refer to indoor unit or Dry Contact manual.

When occupied setting is changed, automatically set cooling set temperature and heating set temperature are the most recently run schedule's cooling
set temperature and heating set temperature, and if there is no previously run schedule, it is set to default value.

(Example)
09:00 - 12:00: occupied / cooling set temperature 27°C / heating set temperature 18°C
12:00 - 13:00: occupied / cooling set temperature 29°C / heating set temperature 16°C
13:00 - 15:00: occupied / cooling set temperature 26°C / heating set temperature 19°C

If it is empty without schedule after 15:00, cooling set temperature is 29°C and heating set temperature is 16°C, and if it is occupied, cooling set
temperature becomes 26°C and heating set temperature becomes 19°C.
 User Manual

ERV

Category Contents

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation

[NORMAL] button: Discharged air ventilates without going trough the electric heat exchanger
Mode [HEX] button: Both air supply/discharge ventilates through the electric heat exchanger
[AUTO] button: Switches to four seasons mode

Wind strength setting

[LOW] button: Set the fan speed to slow
[HIGH] button: Set the fan speed to fast
[SUPER] button: Set the fan speed to Max. speed
Fan speed [AUTO] button: [LOW]-[HIGH]-[SUPER] automatic switching
- User setting is impossible
- When Drift/Quick is set, [AUTO] Fan speed is selected
- When Drift/Quick is cleared, [HIGH] Fan speed is selected
- During [AUTO] operation, when [LOW]/[HIGH]/[SUPER] is selected, Drift/Quick function in operation is cleared

Filter replacement alarm [Clear] button: in case of filter replacement alarm, it cancels filter replacement alarm

Quick [Set/Clear] button: Set/clear Quick function (When Quick function is selected, Drift function is cleared)
Additional function Drift [Set/Clear] button: Set/clear Drift function (When Drift function is selected, Quick function is cleared)
Heater [Set/Clear] button: Set/clear heater function

[Set/Clear] button: Set/Clear Midnight air cooling(NTFC) function that can outdoor unit cooling when outdoor temperature is lower than the
Midnight air cooling(NTFC)
base temperature at night time

HardLock [Set/Clear] button: Set/clear HardLock so that user cannot control any function with individual remote controller
 User Manual

ERV DX

Category Contents

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation

[NORMAL] button: Discharged air ventilates without going trough the electric heat exchanger
Mode [HEX] button: Both air supply/discharge ventilates through the electric heat exchanger
[AUTO] button: Switches to four seasons mode

Set temperature Press [▲]/[▼] button to set the desired temperature

Wind strength setting

[LOW] button: Set the fan speed to slow
[HIGH] button: Set the fan speed to fast
[SUPER] button: Set the fan speed to Max. speed
Fan speed [AUTO] button: [LOW]-[HIGH]-[SUPER] automatic switching
- User setting is impossible
- When Drift/Quick is set, [AUTO] Fan speed is selected
- When Drift/Quick is cleared, [HIGH] Fan speed is selected
- During [AUTO] operation, when [LOW]/[HIGH]/[SUPER] is selected, Drift/Quick function in operation is cleared

[COOL] button: Operates the ERV DX in cooling mode

[AUTO] button: Operates the ERV DX in auto mode
Air conditioner
[HEAT] button: Operates the ERV DX as heating mode
[OFF] button: Stops the air conditioner of the ERV DX

Set temp range When user set the desired temperature individually, the desired temperature outside the designated temperature boundary cannot be set

Filter replacement alarm [Clear] button: in case of filter replacement alarm, it cancels filter replacement alarm

Quick [Set/Clear] button: Set/clear Quick function (When Quick function is selected, Drift function is cleared)
Drift [Set/Clear] button: Set/clear Drift function (When Drift function is selected, Quick function is cleared)
Additional function
Heater [Set/Clear] button: Set/clear heater function
Humidify [Set] button: Set Humidify function (only for air conditioner heating mode)

[Set/Clear] button: Set/Clear Midnight air cooling(NTFC) function that can outdoor unit cooling when outdoor temperature is lower than the
Midnight air cooling(NTFC)
base temperature at night time

HardLock [Set/Clear] button: Set/clear HardLock so that user cannot control any function with individual remote controller
 Mode lock [Set/Clear] button: Set/clear lock so that user cannot control mode setting with individual remote controller

Fan lock [Set/Clear] button: Set/clear lock so that user cannot control Fan speed setting with individual remote controller

TempLock [Set/Clear] button: Set/clear lock so that user cannot control temperature setting with individual remote controller

Midnight air cooling(NTFC) lock [Set/Clear] button: Set/Clear Midnight air cooling(NTFC) schedule set in the remote controller
 User Manual

Heating

Category Contents

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation

[COOL] button: Swtiches to cooling mode

Mode [HEAT] button: Switches to heating mode
[AUTO] button: Switches to automatic mode

Press [▲]/[▼] button to set Air/Water in/out temperature

Air/Water in/out temperature It is displayed based on the set temperature selected in [Setting]-[Installing]
When [Water in/out] is selected, it is displayed as water in/out temperature
When [indoor] is selected, it is displayed as air temperature

[ON] button: Starts hot water operation

- If hot water is operated while the device is in automatic/cooling operation, the corresponding mode and hot water are displayed in
Hot water the icon of the contents display section
- If hot water is operated while the device is stopped, the icon in the contents display section is enabled, and hot water is displayed
[OFF] button: Stops hot water operation

Hot water temperature Press [▲]/[▼] button to set hot water temperature

HardLock [Set/Clear] button: Set/clear HardLock so that user cannot control any function with individual remote controller
 User Manual

AHU

Category Contents

View Details Press [View Details] button to check detail information (But, mobile is excluded)

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation

[COOL] button: Swtiches to cooling mode

[HEAT] button: Switches to heating mode
[FAN] button: Air purification operation. When FAN is selected, you cannot set the desired temperature
Mode
[DRY] button: Removes moisture in rainy season or when humidity is high. When DRY is selected, you cannot set the desired temperature
[Drift] button: Operation to find the operation point with the best ventilation system efficiency to save power consumption. It fluently
discharges the contaminated indoor air by having bigger discharger Fan speed than air supply

Set temperature Press [▲]/[▼] button to set the temperature

[Fan speed] button: Controls the fan based on Fan speed status
Fan control standard [Temp] button: Controls the fan based on temperature status
[Pressure] button: Controls the fan based on Pressure status

It is displayed only when fan control standard is Fan speed

[LOW] button: Set the fan speed to slow
Fan speed
[MED] button: Set the fan speed to normal
[HIGH] button: Set the fan speed to fast

It is displayed only when the additional function's automatic ventilation or automatic ventilation and Humidify are selected during AHU
Automatic ventilation device registration
Automatic ventilation [Set/Clear] button: Starts/stops automatic ventilation

It is enabled only when automatic ventilation function is set

Set CO₂
Press [▲]/[▼] button to set in the unit of 100ppm within 100 ppm ~ 2 000 ppm range

It is displayed only when the addtitional function's Humidify or automatic ventilation and Humidify are selected during AHU device
Humidify registration
Humidify [Set/Clear] button: Starts/stops Humidify function

It is enabled only when Humidify function is set

 Humidity Press [▲]/[▼] button to set the target humidity

Press [OA Damper] : [▲]/[▼] button to set the outdoor unit air damper opening value in the unit of 1 º within 0 º ~ 90 º range
Press [MIX Damper] : [▲]/[▼] button to set the mixer damper opening value in the unit of 1 º within 0 º ~ 90 º range
Press [EA Damper] : [▲]/[▼] button to set the air discharge damper opening value in the unit of 1 º within 0 º ~ 90 º range
Damper opening

When you set [Setting]-[system setting]'s Apply damper opening formula as set, it operates as OA Damper = EA Damper, OA Damper = MIX
Damper = 90

HardLock [Set/Clear] button: Set/clear HardLock so that user cannot control any function with individual remote controller

View AHU in detail

In AHU's control screen, you can press [View Details] button to check detail information.
 User Manual

Scroll chiller

Category Contents

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation

(It is displayed only when device supports the corresponding mode)

Mode [COOL] button: Swtiches to cooling mode
[HEAT] button: Switches to heating mode

Set the load water out temperature for indoor cooling/heating

Set temperature
Press [▲]/[▼] button to set the temperature of cooling mode and heating mode

Alarm [Clear] button: Clears Chiller alarm in case of Chiller alarm

Demand control Press [▲]/[▼] button to set demand limit ratio

 User Manual

Screw chiller

Category Contents

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation

Mode Mode control is impossible. Controls monitored operation mode's set temperature

Set the load water out temperature for indoor cooling/ice making
Set temperature
Press [▲]/[▼] button to set the temperature of cooling mode and ice making mode

Alarm [Clear] button: Clears Chiller alarm in case of Chiller alarm

Motor current limit Press [▲]/[▼] button to set motor current limit ratio
 User Manual

Turbo chiller

Category Contents

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation

Mode Mode control is impossible. Controls monitored operation mode's set temperature

Set the load water out temperature for indoor cooling/heating/ice making
Set temperature
Press [▲]/[▼] button to set the temperature of cooling mode and heating/ice making mode

Alarm [Clear] button: Clears Chiller alarm in case of Chiller alarm

Motor current limit Press [▲]/[▼] button to set motor current limit ratio
 User Manual

Absorption Chiller

Category Contents

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation

Mode Mode control is impossible. Controls monitored operation mode's set temperature

Set the load water out temperature for indoor cooling/heating

Set temperature
Press [▲]/[▼] button to set the temperature of cooling mode and heating mode

Alarm [Clear] button: Clears Chiller alarm in case of Chiller alarm

Control valve upper limit Press [▲]/[▼] button to set the control valve upper limit ratio
 User Manual

DOKIT

Category Contents

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation
 User Manual

DO

Category Contents

[Short] button: Short signal output

Operation
[Open] button: Open signal output
 User Manual

AO

Category Contents

Temperature Set temperature value

Note

Unit symbol may change according to the usage set during device registration.
 User Manual

Device Information
When you click device information tab in the device's control screen, you can check the device information.

You can check device's basic information, operation information, schedule information, error information, and today's history.
 User Manual

Control
You can set the registered device to the desired status and control.

1. In the left side menu tab, click [Control] > [Device control] menu.

2. In the device list tab section, click the desired tab.

Category Description

Group List of group set for convenience

Installation Provides actually connected device information

3. In the filter section, click the filter button of the device type or status to control.

All filter buttons can be selected in multiple.

Only the corresponding information are selected and displayed.

Filter type Detail category

Device Outdoor unit, indoor unit, air purifier, AHU, chiller, ERV, Heating, ON/OFF device, DI, DO, Exp.I/O

Status ON, OFF, Hot water ON, Hot water OFF, Schedule, Peak control, Error, Filter replacement alarm, Lock, Oil replacement alarm

4. In the device section, select the device to control.

You can select several devices at once to control. To select all devices in certain group, click [Multi-select] button, and click [Select All] button. According to the
multiple selected device types, the category to control is limited.

5. In the control window, set the corresponding equipment's control status.

6. When setting is completed, click [Apply] button.

 User Manual

Monitoring
You can check the registered device's control status.

1. In the left side menu tab, click [Control] > [Device control] menu.

2. In the device list tab section, click the desired tab.

Category Description

Group List of group set for convenience

Installation Provides actually connected device information

3. In the filter section, click the filter button of the device type or status to check.

All filter buttons can be selected in multiple.

Only the corresponding information are selected and displayed.

Filter type Detail category

Device Outdoor unit, indoor unit, AHU, chiller, ERV, Heating, ON/OFF device, DI, DO, Exp.I/O

Status ON, OFF, Hot water ON, Hot water OFF, Schedule, Peak control, Error, Filter replacement alarm, Lock, Oil replacement alarm

4. In the device section, check the device information.

5. To check the device's detail control status, click the corresponding device icon.

The corresponding device's control window is displayed.

 User Manual

Edit Drawing
When [Setting] > [System setting]'s Use 'Drawing' is selected as Set, you can edit the drawing.

1. In the left side menu tab, click [Control] > [Device control] menu.

2. In device group tab area, click [Group] tab.

When you select [Installation] tab, the viewing method's [Drawing] is disabled.

3. In the viewing method, click [View Drawing].

4. Click [Edit] button.

5. When you add or change drawing, click [Add Drawing] button.

6. When file load window is displayed, select the drawing file to add and click [Open] button.

The selected drawing is displayed in the Edit drawing screen.

7. To add device in the drawing, select the desired device in the device list in the right side Edit drawing window, and click [+] button. The device is added in the drawing
section.

8. To add text or change text in the drawing, use text box.

Category Description
 Add text Add text box in drawing section

Edit text Edit text in text box

: Normal letter, thick, Italic, underline

: Display in normal letter

: Display in thick letter

: Display in Italic letter

Style
: Display with underlined letter

: Change letter color

: Change letter background color

: Larger letter
Letter size
: Smaller letter

9. To align the device icons on the drawing, use the Alignment Box.

Category Description

Select device Select a device to align on the drawing

: Aligns the selected device icons vertically.

Alignment
: Aligns the selected device icons horizontally.

10. When setting is completed, click [Apply] button.

Note

Part of drawing image with vertical resolution of 1000px or more may not be displayed, and please use image of adequate resolution according to the
display resolution.
In environment with display resolution of 1920x1080, image of 1478x1000 or less is recommended.

During text add / edit, special symbol (^',"|\) may not be used.
 User Manual

Delete Drawing
You can delete the added drawing.

1. In the left side menu tab, click [Control] > [Device control] menu.

2. In device group tab area, click [Group] tab.

3. In the viewing method, click [View Drawing].

4. Click [Edit] button.

The Edit drawing screen is displayed.

5. Click [Delete] button at the top.

The drawing is deleted.

 User Manual

Schedule Control
Schedule is the function to designate the device operation in advance and let the deivce perform the operation reserved at certain time. When you use this function, you
can efficiently manage the device operation in time unit for excellent energy saving effect.

[Schedule]

View entire schedule

Add Schedule

Delete schedule

Copy schedule

Edit schedule

[Exception Date]

Load exception date

Add exception date

Delete exception date

Note

Recommended specification

Schedule: No. of all events included in entire schedule is 50

If it is set to be over the recommended specification, performance degradation may occur.

 User Manual

View entire schedule

You can see the list of schedule in the set period.

You can check whether the set schedule is applied, name, whether to repeat, start date, end date, and device list, and directly [Set] or [Clear] the desired schedule.
 User Manual

Add Schedule
You can add schedule category.

1. In the left menu tab, click [Control] > [Schedule Control] menu.

The schedule control screen is displayed.

2. In the schedule list, click [Add Schedule] button.

The Add schedule screen is displayed.

3. In the schedule name input field, input the desired schedule name.

4. Set whether to repeat the schedule.

Category Description

Once Apply the corresponding schedule only to one day designated in [Period]

Day of week selection Select the desired day of week, and apply the schedule only to the corresponding day of week from the start date to the end date

5. Set the desired period.

When repetition is selected as [Once], select only 1 day

When repetition is selected as [select day of week], select start and end date

Category Description

Select the desired start date in mini calendar

Start Date
Initial start date is selected as today's date

Select the desired end date in mini calendar

End date
You cannot set the end date before the start date

End date not specified Apply the schedule repeatedly without designating the end date

6. To apply the set exception date, click [Load] button.

The exception date set in [Setting]-[system setting]'s schedule exception date setting is updated and displayed.

7. To apply the new exception date, click [Add Exception Date] button to set the exception date name and date to add.

8. In the device setting section, click [Edit Unit] button.

The Edit Unit window is displayed.

9. In the unregistered device list, click the checkbox of the device to register and click [◀] button.

To register several groups at once, click the checkbox of the group to register and click [◀] button.

The selected devices are added to the registered device list.

10. When device registration is completed, click [Apply] button.

11. To add schedule event, in Schedule setting, select device type tab, and click [Add event] button or edit button to set control status of the device in the right side
control area.

12. When control setting is completed, click [Save] button.

13. When all settings are completed, click [Apply] button.

 User Manual

Delete schedule
You can delete already registered schedule.

1. In the left menu tab, click [Control] > [Schedule Control] menu.

The schedule control screen is displayed.

2. In the schedule list, click the Edit button of the schedule to delete.

3. In the right side Edit window screen, click [Delete] button.

4. When notice popup window is created, click [Check] button.

 User Manual

Copy schedule
You can copy and use registered schedule.

1. In the left menu tab, click [Control] > [Schedule Control] menu.

The schedule control screen is displayed.

2. In schedule list, click edit button of the schedule to copy.

3. In the right side edit window screen, click [Copy] button.

4. When notice popup window is created, click [Check] button.

 User Manual

Edit schedule
You can change the set contents of the already registered schedule.

1. In the left menu tab, click [Control] > [Schedule Control] menu.

The schedule control screen is displayed.

2. In the schedule list, click Edit buttoin of the schedule to edit.

3. In the right side edit window screen, click [Edit] button.

4. Edit the schedule contents.

To check the detail contents, check 'Add Schedule' Category.

 User Manual

Load exception date

You can load already set exception date.

1. In the left menu tab, click [Control] > [Schedule Control] menu.

The schedule control screen is displayed.

2. In the schedule list, click [Add Schedule] button.

The Add schedule screen is displayed.

3. In the exception date tab, click [Load] button

The exception date set in [Setting]-[system setting]'s schedule exception date setting is updated and displayed.
 User Manual

Add exception date

You can add new exception date.

1. In the left menu tab, click [Control] > [Schedule Control] menu.

The schedule control screen is displayed.

2. In the schedule list, click [Add Schedule] button.

The Add schedule screen is displayed.

3. In the exception date tab, click [Add Exception Date] button

The Add exception date screen is dispalyed.

4. Input the desired exception date name.

5. Select the exception date to set.

6. When selection is completed, click [Apply] button.

 User Manual

Delete exception date

You can delete alreday registered exception date.

1. In the left menu tab, click [Control] > [Schedule Control] menu.

The schedule control screen is displayed.

2. In Edit schedule screen, click [X] button to delete exception date.

To delete the entire category, click [Delete All] button.

 User Manual

InterLocking
InterLocking is the function to interface with one or more equipment and to control output operation when input condition is satisfied. For InterLocking, you need to group
the equipment to mutual interface in one group and apply the control setting. It describes the method to create and manage the group and equpment interface control
method.

1. In the left menu tab, click [Control] > [InterLocking] menu.

The InterLocking screen is displayed.

2. In the group list, select the group to check the setting.

The the corresponding group's setting status is displayed in the screen.

3. In the group list, when you click [Set] / [Clear] button, you can set the InterLocking operation.

4. To start all the registered group, click [Set All] button, and to stop all, click [Clear All] button.

Note

Recommended specification

Equipment interface control : No. of patterns is 20, No. of input devices is 500, and No. of output devices is 1000

If it is set to be over the recommended specification, performance degradation may occur.

Add/edit InterLocking
You can add and edit new InterLocking.

1. In the left menu tab, click [Control] > [InterLocking] menu.

The InterLocking screen is displayed.

2. Click [+ Add new pattern] button.

Add InterLocking screen is displayed.

3. In the InterLocking name input field, input the desired InterLocking name.

4. Select pattern type.

Category Description

General pattern The pattern that output control command is executed when the input condition is satisfied

The pattern that the output device follows the input device's status
(Some control functions may not be copied.)
Copy pattern
You can add only 1 device to input condition, and only the device with the same attribute with the added input device is registered to the
output device

The pattern that it recognizes as emergency situation when input condition is satisfied
Emergency pattern
When the input condition is satisfied, it tells the alarm with screen and sound

1:1 pattern Pattern to conveniently register many devices if input device is the same as output device

5. Select whether to permit user control. (Only general pattern is possible)

When check box is selected, even if the status is changed by the InterLocking, user may change the status of the equipment.

6. Set equipment interface condition. When you press [+] button, you can add up to 3 output conditions.

It only appears when input condition tab is selected.

Category Description

AND : all device conditions match

OR : one or more device conditions match
Status
NAND : one or more device conditions do not match
NOR : no condition matches

If it is set, while all input conditions are met, output condition control after maintaining time
Maintaining time
Press [▼] button to select maintaining time

It only appears when output condition tab is selected.

Category Description

When check box is selected, if the corresponding event is executed in ACP, whether event occurred is sent to the e-mail set in Setting > error
Send e-mail notice setting > receiving e-mail address
ACP shall be connected to internet network that can send e-mail.

If it is set, when input condition is met, output condition is controlled after the registered delay time
Press [▼] button to select delay time
Delay time
If input condition is met, even if it becomes a status that does not meet the input condition during the delay time, output condition is
controlled after delay time.

7. To add device, click [Edit Unit] button.

The Edit Unit popup window appears.

8. In the selectable device list, click the checkbox of the device to register and click [◀] button.

To register several groups at once, click the checkbox of the group to register and click [◀] button.
 The selected devices are added to the registered device list.

9. When device registration is completed, click [Apply] button.

10. Click registered device's [Condition] button.

11. In the right side control window section, set the desired control status.

12. Select output condition tab, and run No. 7~11 processes in the order.

13. To save the set contents, click [Apply] button.

Note

Meaning of Odor Conditions by Level

Reference Value 1 : Weak

Reference Value 3 : Normal

Reference Value 5 : Strong

Reference Value 6 : Very strong

Delete InterLocking
You can delete registerd InterLocking.

1. In the left menu tab, click [Control] > [InterLocking] menu.

The InterLocking screen is displayed.

2. In the InterLocking list, select the group to delete, and click [Delete] button.

3. When InterLocking delete popup window appears, click [Yes] button.

In the InterLocking list, the selected category is deleted.

 User Manual

Time limit control

You can control the device to operate for the set time and automatically stop.

1. In the left menu tab, click [Control] > [Time limit control] menu.

2. In the group list, select the group to check the setting.

The the corresponding group's setting status is displayed in the screen.

3. In the group list, you can click [Set] / [Clear] button to set the time limit operation.

4. To start all the registered group, click [Set All] button, and to stop all, click [Clear All] button.

Note

Recommended specification

Time limited operation : No. of groups is 10

If it is set to be over the recommended specification, performance degradation may occur.

Add/edit Time limit control group

You can add and edit Time limit control group.

1. In the left menu tab, click [Control] > [Time limit control] menu.

Time limit control screen is displayed.

2. Click [+ Add New Group] button.

Add new group screen is displayed.

During the edicting, when you select the group to edit and click [Edit] button, the following screen is displayed.
3. Input group name.

4. Select continuous operation time and applied day of week.

Category Description

Continuous operation time Press [▼] button, and set the desired continuous operation time (1 hour ~ 4 hours)

Applied day of week Select checkbox to select day of week to run the time limit operation

5. To add device, click [Edit Unit] button.

The Edit Unit popup window appears.

6. In the selectable device list, click the checkbox of the device to register and click [◀] button.

For time limited control, you can register all devices except DI, DO, ON/OFF, Chiller, and Exp.I/O device.

To register several groups at once, click the checkbox of the group to register and click [◀] button.

The selected devices are added to the registered device list.

7. Wheh device registration is completed, click Edit Unit popup window's [Apply] button.

8. Click [Apply] button at the top right side.

Delete Time limit control

You can delete Time limit control group.

1. In the left menu tab, click [Control] > [Time limit control] menu.

Time limit control screen is displayed.

2. In the group list, select the group to delete and click [Delete] button.

3. When Delete group popup window appears, click [Yes] button.

 User Manual

Energy Usage
It describes the method to check the device's operation time, electricity usage amount, gas usage amount, TOE, and CO₂ with values and graph.

1. In the left menu tab, click [Energy] > [Energy Usage] menu.

Energy usage amount screen is displayed.

2. In the group list, select group to view.

3. In the top left side box, select the category to view.

4. Set the viewing period.

Category Description

Day Set the desired day in mini calendar

Month Set the desired month in mini calendar

Period Set the desired period in mini calendar

Today Set today's date as the base date

5. To view the set contents, click [View] button.

Energy usage amount of the set period is displayed.

To save the viewed contents, click [Send Out] button.

(In AC Smart 5 Device, it is stored in USB.)

Note

Viewing power is possible only when PDI is installed.

If PDI is installed, indoor unit, ERV DX, and Heating address shall be set to avoid overlapping.

The power consumption amount appeared in the program may be a little different from the power consumption amount marked on actual bill.

In [Setting]-[Installing], only ACP with [Electricity Usage Amount] set can be monitored.

Viewing gas is possible only when GDI is installed.

The gas amount appeared in the program may be a little different from the gas amount marked on actual bill.

In [Setting]-[Installing], only ACP with [Gas usage amount] set can be monitored.

Energy monitor maintains only the last 1 year's data.

Hourly data is provided up to last 3 months.

 User Manual

Energy Navigation
Energy Navigation is the function that can control [ODU capacity]/[IDU Operation Rate]/[IDU] for each level according to the power usage amount forecast and current
power usage amount to be able to manage the monthly power usage amount below the target amount.

Add target amount

You can add Energy Navigation's target amount.

1. In the left menu tab, click [Energy] > [Energy Navigation] menu.

2. In the control status tab, click the group to add target amount.

3. Click [Target amount setting] button at the top right side.

Target amount setting window appears.

4. Input target amount in each month.

To input in all months at once, input target amount in batch input field and click [Apply] button on the side.

5. When target amount input is completed, click [Apply] button at the top right side.

6. When Apply notice window appears, click [Check] button.

Control Level Setting

You can set control level of Energy Navigation.

1. In the left menu tab, click [Energy] > [Energy Navigation] menu.

2. In the control status tab, click the group to set the control level.

3. Click [Control Level setting] button at the top right side.

Control Level Setting window appears.

4. Select control run method setting.

Category Description
 AUTO At the time of the alarm, control method set for each level is automatically executed.

Manual At the time of the alarm, you select whether to execute the control method set for each level.

5. Click Control Level Setting window's [+Add Level] button.

6. Set the Control Level Setting categories.

Category Description

Excess Standard You can select between usage amount forecast and actual usage amount.

Monthly target excess ratio You can set in 10% unit within 70~130%

ODU capacity: You can set in 10% unit within 0~100%.

Control method IDU operation ratio: You can set in 10% unit within 0~100%.
IDU: IDU control

7. When setting is completed, click [Apply] button at the top right side.

8. When Apply notice window appears, click [Check] button.

 User Manual

Peak demand control

In the control status, you can check ACP name, control method, operation method, control status, and target operation ratio.

Peak Control
Peak control is a function to set the target operation rate to limit the maximum power usage and to control total power usage not to exceed the target operation rate. To
prevent total power usage from exceeding target operation rate, cooling mode is automatically converted to wind only mode according to the priority and heating mode
automatically stops, so the power usage amount can be saved.

1. In the left menu tab, click [Energy] > [Peak demand control] menu.

Peak demand control screen is displayed.

2. In ACP list, select ACP to control.

The corresponding ACP's control setting status is displayed in the screen.

3. In the control information display, set the desired control status.

Category Description

Outdoor unit capacity control: Target operation ratio is applied in the units of outdoor unit to control outdoor unit capacity operation
Operation Method ratio
Priority control: Controls according to the priority of ACP lower level gropus

Indoor unit's target operation ratio is displayed as bar graph

Operation rato bar
You can drag the bar of the graph to set the target operation ratio

Current(%) Among all of the selected ACP indoor units, it marks the % reached by the device currently in operation

Target(%) Press [▲]/[▼] button to set the target operation ratio

Press [▲]/[▼] button to set the cycle of forced operation stop in min. unit
Shift time(min.) You can set to 5 ~ 15 min. range in the units of 1 min.

Operation status It displays device name/whether operating/current temperature/set temperature/mode information

4. To apply the control setting, click [Apply] button.

The set control status is saved.

5. To start the corresponding group with the set status, click the group list's [ON] button. To stop the corresponding group's operation, click the group list's [OFF] button.
Demand control
You can observe the power usage change trend and limit the power usage from exceeding preset contract power usage amount. When it is set to demand control, when it is
expected to exceed the contract power usage amount, it stops from the most unnecessary device and the power usage is distributed, so you can save the power usage
amount.

In demand control menu, you can check demand control status or edit group. But, you cannot set target operation ratio, operation switching time, and operation
control.

Add/edit peak group

You can add and edit peak control group.

1. In the left menu tab, click [Energy] > [Peak demand control] menu.

Peak demand control screen is displayed.

2. Click [Edit Group] button.

Edit group screen is displayed.

Category Description

Group name Input the name of the group to add

Priority Select the desired priority among very low/low/normal/high/very high

[Edit Unit] Open device edit window (add or delete device list)

Registered device It displays the device list registered in the group

[Add New Group] Add group for peak control

[Delete Group] Delete the selected peak group

[Load outdoor unit group] Applied in the units of outdoor unit registerd in ACP

3. Input the name of the corresponding group in the group name input field.

4. Select the desired priority.

5. To register the device, click [Edit Unit] button.

Edit Unit popup window appears.

6. In the unregistered device list, click the checkbox of the device to register and click [◀] button.
 For peak control, only indoor units can be registered.

To register several devices at once, click the check boxes of the devices to register and click [◀] button.

The selected devices are added to the registered device list.

7. To apply in Edit Unit popup window, click [Apply] button.

8. To save the set contents, click Peak demand control screen's [Apply] button.
 User Manual

Operation History
You can view user/automatic control's operation history and the connected device's status change or error status.

1. In the left menu tab, click [History] > [Operation History] menu.

Operation history screen is displayed

2. Set the period to view.

Category Description

Day: Views the history of the selected date

Viewing period
Today: Views today's history

3. In filter category, select device or history type.

You can click the checkbox to select multiple information.

You can initialize the selected contents through [Initialization] button.

4. When device and history type selection is completed, click [Apply] button.

The operation history of the set period is displayed.

 User Manual

Energy Navigation History

You can view history of Energy Navigation alarm and control operation.

1. In the left menu tab, click [History] > [Energy Navigation History] menu.

Energy navigation screen is displayed.

2. Select device to view the history.

3. Set the start date and end date of the period to view history.

4. To view the set contents, click [View] button.

Energy Navigation history of the set period is displayed.

 User Manual

Operation Trend
Operation trend function is the function to provide the past status change of the selected device to help establishing reasonable site operation plan.

Add Device
You can add unit to view operation trend.

1. In the left menu tab, click [History] > [Operation Trend] menu.

Operation trend screen is displayed.

2. Click [+ Add Unit] button.

Add device screen is displayed.

3. In the unregistered device list, click the checkbox of the device to register and click [◀] button.

To register several devices at once, click the check boxes of the devices to register and click [◀] button.

The selected devices are added to the registered device list.

4. To apply in Edit Unit popup window, click [Apply] button.

View Information
You can view the selected device's operation trend information.

1. In the left menu tab, click [History] > [Operation Trend] menu.

Operation trend screen is displayed.

2. In the device list tab section, select the category of the device to view.

3. Select the period to view operation trend.

 Category Description

[Day] button: Select the desired date in mini calendar and set as the base date
[Period] button: Set the start date and end date of the period to view
Period
The maximum period to view is 1 week.
[Today] button: Set today's date as the base date

Send out information

You can send out the viewed device's operation trend information.

1. In the left menu tab, click [History] > [Operation Trend] menu.

Operation trend screen is displayed.

2. In the left side category, select the category to send out and click [Send Out] button at the top right side.

(In AC Smart 5 Device, it is stored in USB.)

Note

Each device stores the following information.

Indoor unit : operation, current temperature, set temperature, cooling set temperature, heating set temperature, operation mode, occupancy

ERV: operation, mode, current temperature (only for ERV DX), set temperature (only for ERV DX)

AHU: operation, mode, set temperature, air supply temperature, air supply humidity, ventilation temperature, ventilation humidity

Heating: Operation, Water inlet temperature, Water outlet temperature, Hot water temperature, Set temperature, Hot water set temp., Mode, Hot water
operation

Chiller: Operation, Water inlet temperature, Water outlet temperature, Mode

DOKIT: Operation

DI: Operation

DO: Operation

Exp.I/O's Port : value

Air purifier : Operation, Odor, PM 10, PM 2.5, PM 1.0

 User Manual

Cycle
You can view indoor/outdoor unit and chiller's cycle information.

Outdoor Unit
It provides the selected outdoor unit's cycle information data.

1. In the left menu tab, click [History] > [Cycle] menu.

Cycle screen is displayed.

Category Description

Outdoor unit cycle information Master/slave outdoor unit information display

Indoor unit cycle information Displays all indoor unit information connected to the outdoor unit

2. In the outdoor unit list, select the outdoor unit to check cycle information.

The corresponding outdoor unit's cycle information is displayed.

Note

You can view only when the outdoor unit providing cycle information is installed.

Chiller
It provides the selected chiller's cycle information data.

1. In the left menu tab, click [History] > [Cycle] menu.

Cycle screen is displayed.

2. In the chiller list, select the chiller to check cycle information.

The corresponding chiller's cycle information is displayed.

 User Manual

Device setting
You can change AC Smart setting, add device, and change registered device's setting.

AC Smart 5 edit
You can change AC Smart setting.

1. In the left menu tab, click [Setting] > [Installing] menu.

Device setting screen is displayed.

2. In device list, select AC Smart.

AC Smart edit screen is displayed.

In device edit area, you can change AC Smart setting information.

Category Description
 Energy Management Select among peak control / peak control and energy navigation

Operation Time Operation time collection and view Set/Clear

Electricity usage amount Electricity usage amount collection and view Set/Clear

Gas usage amount Gas usage amount collection and view Set/Clear

Communication method LGAPI / LGAPII setting

LGAP setting Communication Master / Slave setting

Press [▼] button to select main agent of 2Set automatic mode

2Set automatic mode
Central controller / indoor unit

Press [▼] button to select communication type of the device to connect to CH1 port
LGAP: for indoor unit, ERV, ERV DX, and Heating connection
CH1 setting
LGAP_AHU: for AHU (general, all fresh air, waste heat recovery) connection
MODBUS_9600, MODBUS_19200: for AHU (modular air conditioner, modular all fresh air, DOAS), Exp.I/O, and chiller connection

Address lock When it is set, you cannot change address in indoor unit and ERV remote controller

Note

Some models do not support LGAPII.

When the controller is set as slave, register the IDU or other devices to be controlled by the corresponding controller. At this time, it should not be registered in
duplicate with other slave controllers.

3. When input is completed, click [Apply] button.

4. Click [Send All] button.

Automatic setting
You can automatically search device connected to AC Smart and register.

1. In the left menu tab, click [Setting] > [Installing] menu.

Device setting screen is displayed.

2. In device list, select AC Smart, and click [Auto Search] button.

3. To overwrite AC Smart device setting on the existing setting, click [Check] button.

AC Smart device setting status is applied.

4. When automatic setting is finished, before device edit, click [Send All] button.

Note

Automatic setting takes about 10 min.

Some AHU (modular air conditioner, modular all fresh air, DOAS), chiller, and Exp.I/O do not support automatic setting function.

Exp.I/O is activated when you check 'use' in device edit window after device registration.

Add Device
You can additionally register new device to the device list.

1. In the left menu tab, click [Setting] > [Installing] menu.

Device setting screen is displayed.

2. Click [+ Add Unit] button.

Add device screen is displayed.

3. In the device list, select upper level group to add device.

When you select AC Smart in device list, you can add outdoor unit, ERV, Heating, AHU, Chiller, ON/OFF device, DI, DO, and Exp.I/O.

In the device list, when outdoor unit is selected, you can add only indoor units.

4. In Add device section, input the setting information of the device to add.

According to the selected device, the setting category according to the corresponding device is displayed differently. For the setting information of each device, refer
to the next page.

5. To save the set contents, click [Apply] button.

6. To complete adding device, click [Send All] button.

Device edit
In device list, you can edit registered device.

1. In the left menu tab, click [Setting] > [Installing] menu.

Device setting screen is displayed.

2. In device list, select device to edit.

3. Device setting screen is displayed.

4. Edit device setting information.

According to the selected device, the setting category according to the corresponding device is displayed differently. For the setting information of each device, refer
to the next page.

5. To save the set contents, click [Apply] button.

6. To complete device edit, click [Send All] button.

Delete Device
In the device list, you can delete registered device.

1. In the left menu tab, click [Setting] > [Installing] menu.

Device setting screen is displayed.

2. In device list, select device to delete, and click [Delete] button.

3. When device delete popup window appears, click [Yes] button.

In device list, selected item is deleted.

4. To complete device deleting, click [Send All] button.

Setting information of each device

Setting information of each device is as follows.

Outdoor Unit
IDU

ERV

Heating

AHU

Chiller

DOKIT

DI/DO

Exp.I/O

Exp.I/O's lower level setting

 User Manual

Outdoor Unit

Category Description

ACP name The corresponding device's upper level ACP name

Address Device address

Device name to be displayed in the system

Name
For batch add, it is displayed as “Name_device address” form

Model Product model name

Capacity Product capacity

Set whether to activate ODU device icon

Activate device control(Icon) ODU device is displayed in Group setting, Device control, Device error and Operation history only when ODU activate device control(Icon)
is set.

Add All When checkboxes are selected, all selected devices are added
 User Manual

IDU

Category Description

ACP name The corresponding device's upper level ACP name

ODU name Name of the outdoor unit connected to the corresponding device

Address Device address

Device name to be displayed in the system

Name
For batch add, it is displayed as “Name_device address” form

Model Product model name

Type Indoor unit type selection

Capacity Product capacity

Add All When checkboxes are selected, all selected devices are added
 User Manual

ERV

Category Description

ACP name The corresponding device's upper level ACP name

Type ERV type selection

Address Device address

Device name to be displayed in the system

Name
For batch add, it is displayed as “Name_device address” form

Model Product model name

Capacity Product capacity

Add All When checkboxes are selected, all selected devices are added
 User Manual

Heating

Category Description

ACP name The corresponding device's upper level ACP name

Address Device address

Device name to be displayed in the system

Name
For batch add, it is displayed as “Name_device address” form

Model Product model name

Capacity Product capacity

Control method Select control method

Current Temp 1 Type of the current temperature to be displayed first

Current Temp 2 Type of the current temperature to be displayed second

Current Temp 3 Type of the current temperature to be displayed third

Set temperature Type of the set temperature to control

Add All When checkboxes are selected, all selected devices are added
 User Manual

AHU

Category Description

ACP name The corresponding device's upper level ACP name

Address Device address

Device name to be displayed in the system

Name
For batch add, it is displayed as “Name_device address” form

Model Product model name

AHU type Select AHU type

Additional function Select function to add

Room Temp Between air supply or ventilation, selecte the desired indoor temperature setting standard

Add All When checkboxes are selected, all selected devices are added
 User Manual

Chiller

Category Description

ACP name The corresponding device's upper level ACP name

Address Device address

Device name to be displayed in the system

Name
For batch add, it is displayed as “Name_device address” form

Type Select chiller type

Add All When checkboxes are selected, all selected devices are added
 User Manual

DOKIT

Category Description

ACP name The corresponding device's upper level ACP name

Address Device address

Device name to be displayed in the system

Name
For batch add, it is displayed as “Name_device address” form

Add All When checkboxes are selected, all selected devices are added
 User Manual

DI/DO

Category Description

ACP name The corresponding device's upper level ACP name

Address Device address

Device name to be displayed in the system

Name
For batch add, it is displayed as “Name_device address” form

Add All When checkboxes are selected, all selected devices are added
 User Manual

Exp.I/O

Category Description

ACP name The corresponding device's upper level ACP name

Type Select DeviceType

Device address
Address Range of ACS I/O : 01 ~ F7
Address Address Range of ACU UIO : 60 ~ 67
Address Range of ACU UI : 70 ~ 77
Address Range of ACU UO : 80 ~ 87

Device name to be displayed in the system

Name
For batch add, it is displayed as “Name_device address” form

Add All When checkboxes are selected, all selected devices are added
 User Manual

Exp.I/O's lower level setting

Category Description

Whether used Select whether to use the device

ACP name The corresponding device's upper level ACP name

Device type Device type

Address Device address

Name Device name

Icon Select icon type

Select I/O type

AO: VOL
I/O type UI: BI, VOL, CUR, PT1000, NTC10K, NI1000 (But, when EXP/IO type is ACU UIO, ACU UI, it can be selected from BI or VOL.)
DO: BI
DI: BI

Signal boundary Select signal boundary

Select usage of the device (Usage selection is different according to I/O type)
Usage Status information: On/Off, short/Open, Warning/Normal, Close/Open, On/Off, Occupied/Unoccupied, 1/0
Value information: Temperature, Humidity, Opening, Water level, Operation ratio, Concentration, Pressure

Select unit symbol

Unit Symbol
Flexibly changed according to the usage selection

Display boundary Max./Min. value input

Correction value Correction value input

 User Manual

Group Setting
You can add/delete management group created according to user's usage.

Add Group
You can add new group.

1. In the left menu tab, click [Setting] > [Group Setting] menu.

Group setting screen is displayed.

2. Select group and click [+ Add lower level group] button.

New group is created.

3. Input group name in the group name input field.

4. To register new device in the device list, in the unregistered device list, click the checkbox of the device to register and click [◀] button.

5. To save the set contents, click [Apply] button.

6. To complete group addition, click [Send All] button.

Group edit
You can edit group.

1. In the left menu tab, click [Setting] > [Group Setting] menu.

Group setting screen is displayed.

2. In group list, select group to edit.

3. Edit group information.

4. To save the set contents, click [Apply] button.

5. To complete group addition, click [Send All] button.

Delete group
In the group list, you can select and delete the desired group.

1. In the left menu tab, click [Setting] > [Group Setting] menu.

Group setting screen is displayed.

In the group list, select the group to delete and click [Delete] button.
2. When Delete group popup window appears, click [Yes] button.

The selected group is deleted.

3. To complete group deletion, click [Send All] button.

 User Manual

System Setting
You can change the system setting.

1. In the left menu tab, click [Setting] > [System Setting] menu.

System setting screen is displayed.

2. Set the system.

Category Description

Title Input the desired name in the input field

Press [▼] button to select the desired language

Language
(한국어/ English/ Español/ Português/ Italiano/ Deutsch/ Türkçe/ Polski/ русский/ Français/ 中⽂/ Čeština)

Day format You can set the Day format. (YYYY-MM-DD / MM-DD-YYYY / DD-MM-YYYY)

Time format You can set the Time format. (12 / 24)

Temperature Press [▼] button to select the desired control temperature unit (Celsius 0.5℃ / Celsius 1℃ / Fahrenheit 1℉)

Set the lowest temperature for

Press [▼] button to select the desired cooling/heating lower limit temperature (16℃ / 18℃)
COOL/HEAT

Use Energy Navigation Select wehther to use Energy Navigation

Category Description

Use 'Drawing' Select wehther to use 'Drawing'

 Use CO₂ concentration widget When it is set, dash board CO₂ concentration widget is activated

Use pleasantness widget When it is set, dash board pleasantness widget is activated

Use fine dust widget When it is set, dash board fine dust widget is activated

Enable Automatic Switching and

Enables the automatic central control switching and the temperature limit function.
Temperature Limit

Select whether to apply damper opening formula

Apply damper opening formula
When damper opening is set, it operates at OA=EA and OA+MIX=90

Winter/summer setting for pleasantness calculation

Pleasantness season setting
When summer is set, pleasantness range is formed in lower temperature

Category Description

Energy target amount setting Target energy amount setting for energy(Dashboard) management

Schedule exception date setting Set exception date for schedule setting

To register schedule exception device Set the device to except in schedule setting in advance

Backup: backup of data to PC (In AC Smart 5 Device, it is stored in USB.)

Setting data backup
Backup file application: overwrite data with backup file stored in PC

System restart Restart the entire system

Save installation status to PC

Send out installation status
(In AC Smart 5 Device, it is stored in USB.)

Category Description

System time Check system time

Date setting You can set the date.

Time setting You can set the time.

 Daylight saving time setting Daylight saving time (summer time) start and end date Set/Clear

Version You can check the version.

3. When setting is completed, click [Apply] button.

Setting the exception date

Delete exception date

Register schedule exception device

Note

When system time or date is changed, it can be logged out, and you need to log in again.
 User Manual

Network Setting
You can set or change network information.

1. In the left menu tab, click [Setting] > [Network Setting] menu.

Network setting screen is displayed.

2. Set the network information.

Category Description

IPv4 enable IPv4 usage address Set/Clear

Check IPv4 address setting AUTO(DHCP)/Manual

IPv4 address setting
If you use AUTO(DHCP), the IP address may be changed. So we recommend using the manual IP address configuration.

IPv4 information Check IPv4 address

IPv6 enable IPv6 usage address Set/Clear

Check IPv6 address setting Auto Configuration/DHCP/Manual

IPv6 address setting
If you use DHCP, the IP address may be changed. So we recommend using the automatic or manual IP address configuration.

IPv6 information Check IPv6 address

[AUTO]: Automatically sets main DNS and secondary DNS

DNS setting
[Manual]: User sets main DNS and secondary DNS

MAC address Check MAC address

Web Port setting Port setting (range: 2~65535)

Note

Network setting can be set in Device, and only some settings may be changed in Web.

AC Manager 5 do not support IPv6 function.

3. When setting is completed, click [Apply] button.
 User Manual

Error Notice Setting

You can set or change error notice.

1. In the left menu tab, click [Setting] > [Error Notice Setting] menu.

Error notice setting screen is displayed.

2. Set the error notice.

Category Description

e-mail usage setting Selection of set/clear of whether to send the error occurred device's address and error No. through e-mail

e-mail title e-mail title setting

Receiving e-mail address Input receiving e-mail address

Sending cycle when error occurs Set transmission cycle in case of error (10/20/30/40/50/60 min.)

Once: Sending once same error alarm when error occur.

Repeat sending when error occurs
Repeat: Sending same error alarm repeatly every cycle.

Automatic daily error-notification

Set to send mail at 0:00 every day even if error does not occur
mail

3. To save the set contents, click [Apply] button.

Note

Before e-mail usage setting, check the following categories.

[Setting] > [Network setting]'s DNS server shall be set.

[Setting] > [Administrator setting]'s mail server and sending e-mail shall be set.
 User Manual

Administrator Setting
You can set or change the user management environment when the user logs in with manager authority.

1. In the left menu tab, click [Setting] > [Administrator Setting] menu.

Administrator setting screen is displayed. You can change the manager information or set the system usage environment.
 Category Description

Set the password to use during login

Current password: Input password used currently for login
Set password
New password: Input new password
New password verification: Input the same new password one more time

Set receiving e-mail Input e-mail address

Manager mail server setting

SMTP server: Input SMTP server address
Set Mail server
Port: Input port No.
Connection test: Input mail account test (network shall be connected)

ID: Input user ID

Set sending e-mail
Password: Input user password

Click checkbox to select the desired manager menu (you can select multiple)
Dashboard
Control: device control, schedule control, InterLocking, Time limit control
Set Menu
Energy: Energy usage, Energy Navigation, Peak demand control
History: operation history, Energy Navigation history, operation trend, cycle
Setting: Installing, Group setting, System setting, Network setting, Error notice setting, Administrator setting, Additional user setting

2. To save the set contents, click [Apply] button.

 User Manual

Additional User Setting

You can manage the additional user list when you login with manager authority.

1. In the left menu tab, click [Setting] > [Additional User Setting] menu.

Additional user setting screen is displayed. You can add user or edit or delete registered user information.

Add User
You can add secondary manager and general user.

1. In the left menu tab, click [Setting] > [Additional User Setting] menu.

Additinal user setting screen is displayed.

2. Click [Add User] button.

Add user screen is displayed.

3. Set each category.

Category Description

[User authority]
Info Secondary manager: Provides authority assigned menu
General user: Provides only indoor unit simple controls

[ID]: input ID to use

Set password [password]: input password to use
[Verify password]: input password to use again
 Assign additional user's group authority
Group Authority
When group is selected, only the corresponding group can control

ASssign menu authority used by additional user

Menu Authority
For general user, only [Control]-[Device Control], [Setting]-[Additional User Setting] menu authorities are assigned

4. When setting is completed, click [Apply] button.

Delete User
You can delete registered user.

1. In the left menu tab, click [Setting] > [Additional User Setting] menu.

Additinal user setting screen is displayed.

2. Click [Delete] button of the user to delete.

Delete user screen is displayed.

3. Click [Yes] button

 User Manual

Screen Setting
You can set product screen related usage environment.

1. In the left side menu tab, click [Setting] > [Screen Setting] menu.

Screen setting screen is displayed.

2. Set screen information.

Category Description

Monitor OFF usage: use of monitor power OFF function Set/Clear

Screen saver setting
Monitor OFF standby time (min.): set standby time until monitor power OFF (10/20/30/40/50/60 min.)

3. When setting is completed, click [Apply] button.

 User Manual

Advance Setting
You can set functions required for device operation.

1. In the left side menu tab, click [Setting] > [Advance Setting] menu.

Advance Setting screen is displayed.

Category Description

Outdoor unit cycle monitoring: set whether to use cycle information monitoring
Outdoor unit cycle control: set whether to run cycle control
Slave controller: set whether slave controller control is possible
Set connected device
Slave controller lock: set whether slave controller control is possible for indoor unit with all lock set (Use: Slave controller control is not
possible)
Configuring DI1 Port Normal Status: Configures the DI1 port normal status.

Differential Press [▼] button to set temperature difference for automatic switching operation

Set whether to run Outdoor Unit Oil-Return Operation

Outdoor Unit Oil-Return Operation
Press [▲]/[▼] button to set Outdoor Unit Oil-Return Operation time

2. To save the set contents, click [Apply] button.

 User Manual

TMS Setting
You can set remote service that can manage the system remotely.

1. In the left side menu tab, click [Setting] > [TMS Setting] menu.

TMS Setting screen is displayed.

Category Description

TMS configuration Set whether to use remote service

Service server address: input remote service server address

Service server port: input remote service server port number
Information TMS service Update cycle (sec.):Press [▼] button to select remote service update cycle
10 / 30 / 60 / 90 / 120 seconds
ODU Cycle monitoring boost: Sets whether to ODU Cycle monitoring boost

Site address: remote site address input

Site information Site name: input remote site name
Site code: Press [Request a site code] button to input site code

2. To save the set contents, click [Apply] button.

 User Manual

BACnet/Modbus Setting

Guide on BTL authentication

You need to set BACnet to Type C to make the devices operate using the functions authenticated by BTL.

BACnet Type A/B exists to maintain compatibility with existing products. If you set BACnet to Type A/B, the devices may use the functions not authenticated by BTL,
making them to operate differently from the standard.

Operation method according to BACnet type

- Type A: It creates multiple devices, and the objects are included in the device of each equipment. Multiple devices respond using the same MAC address for their
physical addresses.

- Type B: It creates multiple devices, and the objects are included in the device of each equipment. Devices respond with unique physical addresses.

- Type C: It creates only one device, which includes all objects.

※ Caution: If you change the type, the device number may be changed, making it necessary to perform additional engineering with the BMS.

You can change BACnet/Modbus Setting.

1. In the left side menu tab, click [Setting] > [BACnet/Modbus Setting] menu.

BACnet/Modbus Setting screen is displayed.

2. Set BACnet/Modbus information.

Category Description

BACnet enable BACnet enable Set/Clear

Select temperature unit type (℃/℉)

 Temperature unit setting

Device ID setting to designate Device Instance Number

Air conditioner: Device ID
ERV: Device ID + 1
Device ID setting AHU: Device ID + 2
Outdoor unit cycle information: Device ID + 3
Heating: Device ID + 4
Normal : Device ID + 5

Network Number Setting Network Number Setting

Register as Foreign Device Foreign Device Set/Clear

Only Monitoring setting Only Monitoring Set/Clear

BACnet Port setting BACnet Port setting

BACnet Type setting BACnet Type selection (A/B/C)

Time sync setting Time sync setting Set/Clear

Modbus TCP enable Modbus TCP enable Set/Clear

Vnet Number setting to use Modbus TCP function

Vnet Number setting
Set Vnet Number value operates as Modbus TCP's Slave ID Address

3. When setting is completed, click [Apply] button.

 User Manual

Usage (Mobile, Tablet)

LogIn / LogOut

Dashboard

Device Control

Schedule Control
 User Manual

You can access to the product with IP address in internet address window to use various central control functions.

Note

Chrome browser is recommended for web control.

For access to web, IP address needs to be set.

LogIn
Login method is as follows.

1. Please input IP address of the product in the internet address window.

2. Input ID and password in the login window and click [Login] button.

LogOut
Logout method is as follows.

1. In the menu, click [LogOut] button.

 User Manual

You can check the current operation status and energy usage trend of the equipment installed in the product.

Operation status
It describes the dash board's current operation status tab composition and functions.

No. Category Contents

Check operation status (start/stop/error) of the equipment installed in the product

[group]
① Operation status Checking of operation status of each management group designated by user

[device]
Checking of operation status of each device

② Environment status Checking of average indoor temperature, Max./Min. indoor temperature and group

③ Today's Schedule Checking today's schedule list

④ InterLocking Checking of InterLocking list

Energy
It describes the dash board's energy tab composition and functions.

No. Category Contents

① Energy usage trend Checking of daily, monthly, and yearly trend of electricity/gas usage amount
 ② Electricity usage amount Checking of electricity usage amount accumulation, forecast, and goal

③ Gas usage amount Checking of gas usage amount accumulation, forecast, and goal

④ Total energy usage amount Checking of total energy usage amount accumulation, forecast, and goal

⑤ Continuous operation time Checking of continuous operation time rank of indoor unit

⑥ Energy Navigation Check energy navigation status

Environment status
It describes the composition and functions of dash board environment status tab

No. Category Contents

① CO₂ monitoring Check CO₂ status of registered ERV

② Comfort Level Monitoring Check registered indoor unit's pleasantness status

Check registered indoor unit, air purifier's fine dust status

③ Fine dust monitoring
Fine dust is classified to PM10, PM2.5, and PM1.0, and it indicates each status and concentration
 User Manual

Device Control
It describes the method to control the device and to monitor the device status.

[Screen]

Screen Structure and Function

[Control Window]

Control of Each Device

Device Information
 User Manual

Screen Structure and Function

1. In the left menu tab, click [Control] > [Device Control] menu.

The device control screen is displayed.

No. Category Contents

① Group Information Group name and group location

② Filtering Device category filtering

③ Multi-select Select multiple devices when it is clicked

④ Device section Check the information of the devices set in the group
 User Manual

Control of Each Device

When a device is selected in the device section, control window is created as in the following screen. Through the control window, you can control the selected device.

Note

The detail control boundary for each device may be different from the actual device, so make sure to refer to the corresponding device's manual.

Chiller interface is an optional function, and you need to separately purchase the option for chiller interface.

ACS I/O devices may have different control tool name, unit, upper limit, lower limit, etc. according to the setting.

Detail controls for each device

Outdoor Unit

IDU
IDU (2Set)

ERV

ERV DX

Heating

AHU

Scroll chiller

Screw chiller

Turbo chiller

Absorption Chiller

DOKIT

DO

AO

Air purifier
 User Manual

Outdoor Unit

Category Contents

Outdoor unit capacity control Press [▼] button to set operation rate (%)

Smart load control function Press [▲]/[▼] button to set smart load control stage (0stage, 1stage, 2stage, 3stage, 4stage)

Low noise operation [Set/Clear] button: outdoor unit low noise operation Set/Clear

Defrost mode Press [▲]/[▼] button to set defrost mode stage (0stage, 1stage, 2stage, 3stage)

ODU Refrigerant Noise Reduction setting Press [▲]/[▼] button to set outdoor unit refrigerant noise reduction stage (0stage, 1stage, 2stage)

Note

In the central controller, if 'outdoor unit low noise operation' is used, in the installed indoor unit's remote controller, you need to set [Installer setting] > [Low
noise mode] to 'ODU'. (Default value 'ODU')
 User Manual

IDU

Category Contents

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation

[COOL] button: Swtiches to cooling mode

[HEAT] button: Switches to heating mode
[FAN] button: Air purification operation. When FAN is selected, set temperature is not applied to the device
Mode
[DRY] button: Removes moisture during rainy season or when humidity is high. When DRY is selected, set temperature is not
applied to the device
[AUTO] button: Switches to automatic mode

Air cleaning control only for air cleaning function supporting indoor unit
Air cleaning single operation
1) In indoor unit stop state, in case of air cleaning [Set], air cleaning single operation with wind only (automatic wind)
(During air cleaning single operation, mode lock and wind amount lock are not checked)
2) During air cleaning single operation, in case of operation [OFF] or air cleaning [Clear], air cleaning is cancelled to previous
mode and previous wind amount
Air cleaning (But, in case of mode or wind amount control together, control is done with controlled mode and wind amount)
Air cleaning additional operation
1) In indoor unit stop state, in case of operation status [ON] and air cleaning [Set], in current mode, air cleaning additional
operation
2) In indoor unit operation state, in case of air cleaning [Set], in current mode, air cleaning additional operation
3) During air cleaning additional operation, in case of operation [OFF], operation stops
4) During air cleaning additional operation, in case of air cleaning [Clear], air cleaning is cancelled

Set temperature Press [▲]/[▼] button to set the desired temperature

Wind strength setting

[LOW] button: Set the fan speed to slow
Fan speed [MED] button: Set the fan speed to normal
[HIGH] button: Set the fan speed to fast
[AUTO] button: [LOW]-[MED]-[HIGH] automatic switching

Swing [Set/Clear] button: Set/Clear the Swing function

When user set the desired temperature individually, the desired temperature outside the designated temperature boundary
Set temp range
 cannot be set

Human detection mode - ON/OFF learned power Only for human detection mode - supporting indoor unit, human detection mode - control
saving [Set/Clear] button: human detection mode - ON/OFF learned power saving Set/Clear

Human detection mode - Temperature power Only for human detection mode - supporting indoor unit, human detection mode - control
saving [Set/Clear] button: human detection mode - temperature power saving Set/Clear

Human detection mode - Unoccupied time Only for human detection mode - supporting indoor unit, human detection mode - control
setting(minute) Set empty decision time to 5, 10, 15, 30, 60, or 90 min.

Only for human detection mode - supporting indoor unit, human detection mode - control
Human detection mode - Direct wind
[Set/Clear] button: human detection mode - direct wind Set/Clear

Only for human detection mode - supporting indoor unit, human detection mode - control
Human detection mode - Indirect wind
[Set/Clear] button: human detection mode - indirect wind Set/Clear

[Set/Clear] button: Comfortable Power Saving function Set/Clear

Comfortable Power Saving You can press [▲]/[▼] button to set stage
Only when indoor unit is in cooling operation, Comfortable Power Saving control is possible

Filter replacement alarm [Clear] button: in case of filter replacement alarm, it cancels filter replacement alarm

HardLock [Set/Clear] button: Set/clear HardLock so that user cannot control any function with individual remote controller

Mode lock [Set/Clear] button: Set/clear lock so that user cannot control mode setting with individual remote controller

Fan lock [Set/Clear] button: Set/clear lock so that user cannot control Fan speed setting with individual remote controller

TempLock [Set/Clear] button: Set/clear lock so that user cannot control temperature setting with individual remote controller

It is a function to automatically switch to cooling operation if indoor temperature exceeds upper limit temperature, to heating
operation if it is less than lower limit temperature, and to wind only operation if it is between upper limit temperature and lower
Auto change over(Occupied)
limit temperature (supported only in outdoor unit with both cooling/heating)
[Set/Clear] button: Set/clear Auto change over(Occupied)

Lower /Upper temp. Auto change over(Occupied)'s lower limit temperature and upper limit temperature setting

Select the Fan speed value to set in the indoor unit during Auto change over(Occupied) operation
[LOW] button: Set the fan speed to slow
Auto change over(Occupied) Fan speed [MED] button: Set the fan speed to normal
[HIGH] button: Set the fan speed to fast
[AUTO] button: [LOW]-[MED]-[HIGH] automatic switching

Function to maintain the temperature of the space where the device is installed in certain boundary (Only supported by
Setback(UnOccupied) cooling/heating simultaneous type outdoor unit)
[Set/Clear] button: Set/clear the Setback(UnOccupied)

Cool start Press [▲]/[▼] button to set the cooling operation start temperature(21°C~40°C)

Heat start Press [▲]/[▼] button to set the heating operation start temperature(1°C~20°C)
 User Manual

IDU (2Set)
When 2Set function supporting outdoor unit/indoor unit/remote controller are used and in [Setting] > [Installing], if ACP''s 2Set automatic mode is selected as IDU, indoor
unit 2Set control window is generated on the right side as in the following screen.

Category Contents

[ON] button: Starts the device operation

Operation
[OFF] button: Stops the device operation

[COOL] button: Swtiches to cooling mode

[HEAT] button: Switches to heating mode
[FAN] button: Air purification operation. When FAN is selected, set temperature is not applied to the device
Mode
[DRY] button: Removes moisture during rainy season or when humidity is high. When DRY is selected, set temperature is not
applied to the device
[AUTO] button: Switches to automatic mode

Air cleaning control only for air cleaning function supporting indoor unit
Air cleaning single operation
1) In indoor unit stop state, in case of air cleaning [Set], air cleaning single operation with wind only (automatic wind)
(During air cleaning single operation, mode lock and wind amount lock are not checked)
2) During air cleaning single operation, in case of operation [OFF] or air cleaning [Clear], air cleaning is cancelled to previous
mode and previous wind amount
Air cleaning (But, in case of mode or wind amount control together, control is done with controlled mode and wind amount)
Air cleaning additional operation
1) In indoor unit stop state, in case of operation status [ON] and air cleaning [Set], in current mode, air cleaning additional
operation
2) In indoor unit operation state, in case of air cleaning [Set], in current mode, air cleaning additional operation
3) During air cleaning additional operation, in case of operation [OFF], operation stops
4) During air cleaning additional operation, in case of air cleaning [Clear], air cleaning is cancelled

Function to set the space with the corresponding indoor unit as occupied or empty
Occupancy [Occupied] button: occupied setting
[Unoccupied] button: empty setting

Cooling set temperature Press [▲]/[▼] button to set cooling set temperature

Heating setting temperature Press [▲]/[▼] button to set heating set temperature
Cooling lower limit/upper limit temperature Cooling lower limit temperature and upper limit temperature setting

Heating lower limit/upper limit temperature Heating lower limit temperature and upper limit temperature setting

Wind strength setting

[LOW] button: Set the fan speed to slow
Fan speed [MED] button: Set the fan speed to normal
[HIGH] button: Set the fan speed to fast
[AUTO] button: [LOW]-[MED]-[HIGH] automatic switching

Swing [Set/Clear] button: Set/Clear the Swing function

Human detection mode - ON/OFF learned Only for human detection mode - supporting indoor unit, human detection mode - control
power saving [Set/Clear] button: human detection mode - ON/OFF learned power saving Set/Clear

Human detection mode - Temperature power Only for human detection mode - supporting indoor unit, human detection mode - control
saving [Set/Clear] button: human detection mode - temperature power saving Set/Clear

Human detection mode - Unoccupied time Only for human detection mode - supporting indoor unit, human detection mode - control
setting(minute) Set empty decision time to 5, 10, 15, 30, 60, or 90 min.

Only for human detection mode - supporting indoor unit, human detection mode - control
Human detection mode - Direct wind
[Set/Clear] button: human detection mode - direct wind Set/Clear

Only for human detection mode - supporting indoor unit, human detection mode - control
Human detection mode - Indirect wind
[Set/Clear] button: human detection mode - indirect wind Set/Clear

[Set/Clear] button: Comfortable Power Saving function Set/Clear

Comfortable Power Saving You can press [▲]/[▼] button to set stage
Only when indoor unit is in cooling operation, Comfortable Power Saving control is possible

Filter replacement alarm [Clear] button: In case of filter replacement alarm, it cancels filter replacement alarm

HardLock [Set/Clear] button: Set/clear HardLock so that user cannot control any function with individual remote controller

Mode lock [Set/Clear] button: Set/clear lock so that user cannot control mode setting with individual remote controller

Fan lock [Set/Clear] button: Set/clear lock so that user cannot control Fan speed setting with individual remote controller

TempLock [Set/Clear] button: Set/clear lock so that user cannot control temperature setting with individual remote controller

Note

2set automatic mode

Only with 2Set automatic mode supporting indoor/outdoor air, the corresponding function can be used. (For whether each device supports 2Set, please
refer to the manual of the corresponding device.)

Override is a function that can be set from remote controller. For override function related contents, please refer to remote controller manual.

In 2Set automatic mode, along with Auto icon, product's actual operation mode (cooling, heating) status is displayed.

Occupancy

If occupancy sensor is interlinked to indoor unit, setting from the central control has priority over the corresponding occupancy sensor. For occupancy
sensor related contents, please refer to indoor unit or Dry Contact manual.

When occupied setting is changed, automatically set cooling set temperature and heating set temperature are the most recently run schedule's cooling
set temperature and heating set temperature, and if there is no previously run schedule, it is set to default value.

(Example)
09:00 - 12:00: occupied / cooling set temperature 27°C / heating set temperature 18°C
12:00 - 13:00: occupied / cooling set temperature 29°C / heating set temperature 16°C
13:00 - 15:00: occupied / cooling set temperature 26°C / heating set temperature 19°C

If it is empty without schedule after 15:00, cooling set temperature is 29°C and heating set temperature is 16°C, and if it is occupied, cooling set
temperature becomes 26°C and heating set temperature becomes 19°C.
 User Manual

ERV

Category Contents

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation

[NORMAL] button: Discharged air ventilates without going trough the electric heat exchanger
Mode [HEX] button: Both air supply/discharge ventilates through the electric heat exchanger
[AUTO] button: Switches to four seasons mode

Wind strength setting

[LOW] button: Set the fan speed to slow
[HIGH] button: Set the fan speed to fast
[SUPER] button: Set the fan speed to Max. speed
Fan speed [AUTO] button: [LOW]-[HIGH]-[SUPER] automatic switching
- User setting is impossible
- When Drift/Quick is set, [AUTO] Fan speed is selected
- When Drift/Quick is cleared, [HIGH] Fan speed is selected
- During [AUTO] operation, when [LOW]/[HIGH]/[SUPER] is selected, Drift/Quick function in operation is cleared

Filter replacement alarm [Clear] button: in case of filter replacement alarm, it cancels filter replacement alarm

Quick [Set/Clear] button: Set/clear Quick function (When Quick function is selected, Drift function is cleared)
Additional function Drift [Set/Clear] button: Set/clear Drift function (When Drift function is selected, Quick function is cleared)
Heater [Set/Clear] button: Set/clear heater function

[Set/Clear] button: Set/Clear Midnight air cooling(NTFC) function that can outdoor unit cooling when outdoor temperature is lower than the
Midnight air cooling(NTFC)
base temperature at night time

HardLock [Set/Clear] button: Set/clear HardLock so that user cannot control any function with individual remote controller
 User Manual

ERV DX

Category Contents

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation

[NORMAL] button: Discharged air ventilates without going trough the electric heat exchanger
Mode [HEX] button: Both air supply/discharge ventilates through the electric heat exchanger
[AUTO] button: Switches to four seasons mode

Set temperature Press [▲]/[▼] button to set the desired temperature

Wind strength setting

[LOW] button: Set the fan speed to slow
[HIGH] button: Set the fan speed to fast
[SUPER] button: Set the fan speed to Max. speed
Fan speed [AUTO] button: [LOW]-[HIGH]-[SUPER] automatic switching
- User setting is impossible
- When Drift/Quick is set, [AUTO] Fan speed is selected
- When Drift/Quick is cleared, [HIGH] Fan speed is selected
- During [AUTO] operation, when [LOW]/[HIGH]/[SUPER] is selected, Drift/Quick function in operation is cleared

[COOL] button: Operates the ERV DX in cooling mode

[AUTO] button: Operates the ERV DX in auto mode
Air conditioner
[HEAT] button: Operates the ERV DX as heating mode
[OFF] button: Stops the air conditioner of the ERV DX

Set temp range When user set the desired temperature individually, the desired temperature outside the designated temperature boundary cannot be set

Filter replacement alarm [Clear] button: in case of filter replacement alarm, it cancels filter replacement alarm

Quick [Set/Clear] button: Set/clear Quick function (When Quick function is selected, Drift function is cleared)
Drift [Set/Clear] button: Set/clear Drift function (When Drift function is selected, Quick function is cleared)
Additional function
Heater [Set/Clear] button: Set/clear heater function
Humidify [Set] button: Set Humidify function (only for air conditioner heating mode)

[Set/Clear] button: Set/Clear Midnight air cooling(NTFC) function that can outdoor unit cooling when outdoor temperature is lower than the
Midnight air cooling(NTFC)
base temperature at night time

HardLock [Set/Clear] button: Set/clear HardLock so that user cannot control any function with individual remote controller
 Mode lock [Set/Clear] button: Set/clear lock so that user cannot control mode setting with individual remote controller

Fan lock [Set/Clear] button: Set/clear lock so that user cannot control Fan speed setting with individual remote controller

TempLock [Set/Clear] button: Set/clear lock so that user cannot control temperature setting with individual remote controller

Midnight air cooling(NTFC) lock [Set/Clear] button: Set/Clear Midnight air cooling(NTFC) schedule set in the remote controller
 User Manual

Heating

Category Contents

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation

[COOL] button: Swtiches to cooling mode

Mode [HEAT] button: Switches to heating mode
[AUTO] button: Switches to automatic mode

Press [▲]/[▼] button to set Air/Water in/out temperature

Air/Water in/out temperature It is displayed based on the set temperature selected in [Setting]-[Installing]
When [Water in/out] is selected, it is displayed as water in/out temperature
When [indoor] is selected, it is displayed as air temperature

[ON] button: Starts hot water operation

- If hot water is operated while the device is in automatic/cooling operation, the corresponding mode and hot water are displayed in
Hot water the icon of the contents display section
- If hot water is operated while the device is stopped, the icon in the contents display section is enabled, and hot water is displayed
[OFF] button: Stops hot water operation

Hot water temperature Press [▲]/[▼] button to set hot water temperature

HardLock [Set/Clear] button: Set/clear HardLock so that user cannot control any function with individual remote controller
 User Manual

AHU

Category Contents

View Details Press [View Details] button to check detail information (But, mobile is excluded)

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation

[COOL] button: Swtiches to cooling mode

[HEAT] button: Switches to heating mode
[FAN] button: Air purification operation. When FAN is selected, you cannot set the desired temperature
Mode
[DRY] button: Removes moisture in rainy season or when humidity is high. When DRY is selected, you cannot set the desired temperature
[Drift] button: Operation to find the operation point with the best ventilation system efficiency to save power consumption. It fluently
discharges the contaminated indoor air by having bigger discharger Fan speed than air supply

Set temperature Press [▲]/[▼] button to set the temperature

[Fan speed] button: Controls the fan based on Fan speed status
Fan control standard [Temp] button: Controls the fan based on temperature status
[Pressure] button: Controls the fan based on Pressure status

It is displayed only when fan control standard is Fan speed

[LOW] button: Set the fan speed to slow
Fan speed
[MED] button: Set the fan speed to normal
[HIGH] button: Set the fan speed to fast

It is displayed only when the additional function's automatic ventilation or automatic ventilation and Humidify are selected during AHU
Automatic ventilation device registration
Automatic ventilation [Set/Clear] button: Starts/stops automatic ventilation

It is enabled only when automatic ventilation function is set

Set CO₂
Press [▲]/[▼] button to set in the unit of 100ppm within 100 ppm ~ 2 000 ppm range

It is displayed only when the addtitional function's Humidify or automatic ventilation and Humidify are selected during AHU device
Humidify registration
Humidify [Set/Clear] button: Starts/stops Humidify function

It is enabled only when Humidify function is set

 Humidity Press [▲]/[▼] button to set the target humidity

Press [OA Damper] : [▲]/[▼] button to set the outdoor unit air damper opening value in the unit of 1 º within 0 º ~ 90 º range
Press [MIX Damper] : [▲]/[▼] button to set the mixer damper opening value in the unit of 1 º within 0 º ~ 90 º range
Press [EA Damper] : [▲]/[▼] button to set the air discharge damper opening value in the unit of 1 º within 0 º ~ 90 º range
Damper opening

When you set [Setting]-[system setting]'s Apply damper opening formula as set, it operates as OA Damper = EA Damper, OA Damper = MIX
Damper = 90

HardLock [Set/Clear] button: Set/clear HardLock so that user cannot control any function with individual remote controller

View AHU in detail

In AHU's control screen, you can press [View Details] button to check detail information.
 User Manual

Scroll chiller

Category Contents

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation

(It is displayed only when device supports the corresponding mode)

Mode [COOL] button: Swtiches to cooling mode
[HEAT] button: Switches to heating mode

Set the load water out temperature for indoor cooling/heating

Set temperature
Press [▲]/[▼] button to set the temperature of cooling mode and heating mode

Alarm [Clear] button: Clears Chiller alarm in case of Chiller alarm

Demand control Press [▲]/[▼] button to set demand limit ratio

 User Manual

Screw chiller

Category Contents

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation

Mode Mode control is impossible. Controls monitored operation mode's set temperature

Set the load water out temperature for indoor cooling/ice making
Set temperature
Press [▲]/[▼] button to set the temperature of cooling mode and ice making mode

Alarm [Clear] button: Clears Chiller alarm in case of Chiller alarm

Motor current limit Press [▲]/[▼] button to set motor current limit ratio
 User Manual

Turbo chiller

Category Contents

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation

Mode Mode control is impossible. Controls monitored operation mode's set temperature

Set the load water out temperature for indoor cooling/heating/ice making
Set temperature
Press [▲]/[▼] button to set the temperature of cooling mode and heating/ice making mode

Alarm [Clear] button: Clears Chiller alarm in case of Chiller alarm

Motor current limit Press [▲]/[▼] button to set motor current limit ratio
 User Manual

Absorption Chiller

Category Contents

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation

Mode Mode control is impossible. Controls monitored operation mode's set temperature

Set the load water out temperature for indoor cooling/heating

Set temperature
Press [▲]/[▼] button to set the temperature of cooling mode and heating mode

Alarm [Clear] button: Clears Chiller alarm in case of Chiller alarm

Control valve upper limit Press [▲]/[▼] button to set the control valve upper limit ratio
 User Manual

DOKIT

Category Contents

[ON] button: starts the device operation

Operation
[OFF] button: Stops the device operation
 User Manual

DO

Category Contents

[Short] button: Short signal output

Operation
[Open] button: Open signal output
 User Manual

AO

Category Contents

Temperature Set temperature value

Note

Unit symbol may change according to the usage set during device registration.
 User Manual

Device Information
When you click device information tab in the device's control screen, you can check the device information.

You can check device's basic information, operation information, schedule information, error information, and today's history.
 User Manual

Schedule Control
Schedule is a function for device to perform reserved operation at certain time by designating device operation in advance. When this function is used, device operation
can be managed in time unit efficiently and energy saving effect is excellent.

[Schedule]

Check schedule
 User Manual

Check schedule
You can see all set schedules.

When you click Edit icon, you can check detail contents of the chedule.
 User Manual

BACnet/Modbus Protocol

Guide on BTL authentication

You need to set BACnet to Type C to make the devices operate using the functions authenticated by BTL.

BACnet Type A/B exists to maintain compatibility with existing products. If you set BACnet to Type A/B, the devices may use the functions not authenticated by BTL,
making them to operate differently from the standard.

For BACnet Type settings, go to [Usage (PC)] > [BACnet/Modbus Setting] menu.

Operation method according to BACnet type

- Type A: It creates multiple devices, and the objects are included in the device of each equipment. Multiple devices respond using the same MAC address for their
physical addresses.

- Type B: It creates multiple devices, and the objects are included in the device of each equipment. Devices respond with unique physical addresses.

- Type C: It creates only one device, which includes all objects.

※ Caution: If you change the type, the device number may be changed, making it necessary to perform additional engineering with the BMS.

AC Manager 5 can be linked with the BMS (Building Management System) that supports the BACnet IP/Modbus TCP protocol.
The functions that can be controlled or monitored by the BMS vary depending on the protocol.

[BACnet]

Commission

Object List

BIBBs

PICS

[Modbus]

Commission

Function code

Register List
 User Manual

BACnet Commission
Commissioning is the process of verifying the subsystems to achieve the owner's project requirements as intended by the building owner and as designed by the building
architects and engineers.

After AC Manager 5 installation, you can check the operation status of the device by using the web function before connection with the BMS system.

Creating of the Points. This is NOT to be done by LG since it is directly related to the BMS side. The BMS engineer is to carry out the engineering of the Point, however LG is
responsible for providing the method of how the Points are calculated.

Precautions
To use BACnet feature, you must select [Settings] > [BACnet/Modbus Setting] > [BACnet enable] as Set.

In case of installing 2 or more AC Manager 5, you must change [Settings] > [BACnet/Modbus Setting] > [Device ID Setting] so that the Device IDs are not duplicate
among AC Manager 5. It is recommended that you keep a difference of 10 or more for different Device IDs.

If Device Discover doesn't work well, change [Settings] > [BACnet/Modbus Setting] > [BACnet Type Setting].

It is recommended that you request ReadProperty/WriteProperty at an interval of 200 ms or more for each property.

It is recommended that you request ReadPropertyMultiple/WritePropertyMultiple at an interval of 500 ms or more for each property.

SubscribeCOV can be registered up to 1024.

If AC Manager 5 and BMS are located on different networks, BBMD (BACnet/IP Broadcast Management Device) is needed.

As AC Manager 5 does not support the BBMD function, a separate BBMD is required. You can register AC Manager 5 as a foreign device in BBMD using [Settings] >
[BACnet/Modbus Setting] > [Register as Foreign Device] function.
 User Manual

BACnet Object List

It describes the BACnet object list provided by AC Manager 5.

Instance Number

Indoor Unit Object List

ERV Object List

AHU Object List

Outdoor Unit Object List

Heating Object List

General Object List

 User Manual

Definition of Instance Number

The instance number of each device is assigned as follows

Example of Instance Number

Description Product Type Product Address Point Instance Number

IDU Address 0x00, On/Off (Setting) 0 0 1 1

IDU Address 0x00, Operation Mode (Setting) 0 0 7 7

IDU Address 0x1B, On/Off (Setting) 0 27 1 6913

IDU Address 0x1B, Operation Mode (Setting) 0 27 7 6919

ERV Address 0x00, On/Off (Setting) 1 0 1 65537

ERV Address 0x00, Operation Mode (Setting) 1 0 7 65543

ERV Address 0x1B, On/Off (Setting) 1 27 1 72449

ERV Address 0x1B, Operation Mode (Setting) 1 27 7 72455

AHU Address 0x00, On/Off (Setting) 2 0 1 131073

AHU Address 0x00, Operation Mode (Setting) 2 0 7 131079

AHU Address 0x0F, On/Off (Setting) 2 15 1 134913

AHU Address 0x0F, Operation Mode (Setting) 2 15 7 134919

ODU Address 0x00, Compressor Operation 3 0 1 196609

ODU Address 0x00, Operation Mode 3 0 14 196622

ODU Address 0x0F, Compressor Operation 3 15 1 200449

ODU Address 0x0F, Operation Mode 3 15 14 200462

Heating Address 0x00, On/Off (Setting) 4 0 1 262145

Heating Address 0x00, Operation Mode (Setting) 4 0 5 262149

Heating Address 0x0F, On/Off (Setting) 4 15 1 265985

Heating Address 0x0F, Operation Mode (Setting) 4 15 5 265989

General Object, All Unit Run/Stop (Setting) 5 0 1 327681

General Object, All Unit Set Room Temperature (Setting) 5 0 2 327682

 User Manual

Indoor Unit Object List

One Indoor unit has the following list of points. Some points may not be supported depending on the product.

Object
Point Description Object Name(_XXX : Address) Unit Text-0 Text-1 Text-2 Text-3 Text-4 Text-5 Text-6
Type

1 On/Off (Setting) StartStopCommand_XXX BO - Stop (0) Start (1) - - - - -

2 On/Off (Status) StartStopStatus_XXX BI - Stop (0) Start (1) - - - - -

Prohibit
3 Lock (Setting) LockCommand_XXX BO - Permit (0) - - - - -
(1)

Prohibit
4 Lock (Status) LockStatus_XXX BI - Permit (0) - - - - -
(1)

5 Filter Sign FilterSign_XXX BI - Off (0) On (1) - - - - -

6 Filter Sign reset FilterSignReset_XXX BV - - Reset (1) - - - - -

Auto Heat
7 Operation Mode (Setting) AirConModeCommand_XXX MO - - Cool (1) Dry (2) Fan (3) -
(4) (5)

Auto Heat
8 Operation Mode (Status) AirConModeStatus_XXX MI - - Cool (1) Dry (2) Fan (3) -
(4) (5)

9 Swing (Setting) SwingCommand_XXX BO - Stop (0) Start (1) - - - - -

10 Swing (Status) SwingStatus_XXX BI - Stop (0) Start (1) - - - - -

Auto
11 Fan Speed (Setting) FanSpeedCommand_XXX MO - - Low (1) Middle (2) High (3) - -
(4)

Auto
12 Fan Speed (Status) FanSpeedStatus_XXX MI - - Low (1) Middle (2) High (3) - -
(4)

13 Set Room Temperature SetRoomTemp_XXX AV ℃(℉) 16 ℃ ~ 30 ℃ (60 ℉ ~ 86 ℉)

14 Set Temperature (Status) RoomTemp_XXX AI ℃(℉)

Abnormal
15 Alarm Alarm_XXX BI - Normal (0) - - - - -
(1)

16 Error Code MalfunctionCode_XXX AI - Please refer to LG error code list.

17 - - - - -

18 - - - - -

19 Room Temperature SetTempStatus_XXX AI ℃(℉) 16 ℃ ~ 30 ℃ (60 ℉ ~ 86 ℉)

Accumulated Power Distribution 100

20 Accumulated power(100 Watt)_XXX AI Wattage values
(Status) Watt

21 - - - - -

22 - - - - -

23 - - - - -

24 - - - - -

25 - - - - -

26 - - - - -

27 Set Upper Temperature (Setting) TempRangeUpperLimitCommand_XXX AV ℃(℉) 18 ℃ ~ 30 ℃ (64 ℉ ~ 86 ℉)

28 Set Upper Tempaerature (Status) TempRangeLowerLimitCommand_XXX AV ℃(℉) 16 ℃ ~ 30 ℃ (60 ℉ ~ 86 ℉)

29 Set Lower Temperature (Setting) TempRangeUpperLimitStatus_XXX AI ℃(℉) 18 ℃ ~ 30 ℃ (64 ℉ ~ 86 ℉)

30 Set Lower Temperature (Status) TempRangeLowerLimitStatus_XXX AI ℃(℉) 16 ℃ ~ 30 ℃ (60 ℉ ~ 86 ℉)

Prohibit
31 Mode Lock (Setting) ModeLockCommand_XXX BO - Permit (0) - - - - -
(1)

Prohibit
32 Mode Lock (Status) ModeLockStatus_XXX BI - Permit (0) - - - - -
(1)

Prohibit
33 Fan Lock (Setting) FanLockCommand_XXX BO - Permit (0) - - - - -
(1)

Prohibit
34 Fan Lock (Status) FanLockStatus_XXX BI - Permit (0) - - - - -
(1)

Unoccupied Occupied
35 Occupancy (Setting) OccupancyCommand_XXX BO - - - - - -
(0) (1)

Unoccupied Occupied
36 Occupancy (Status) OccupancyStatus_XXX BI - - - - - -
(0) (1)
37 2Set Cooling Set Temperature 2SetCoolingTempCommand_XXX AV ℃(℉) 10 ℃ ~ 37.5 ℃ (50 ℉ ~ 99 ℉)
(Setting)

2Set Cooling Set Temperature

38 2SetCoolingTempStatus_XXX AI ℃(℉) 10 ℃ ~ 37.5 ℃ (50 ℉ ~ 99 ℉)
(Status)

2Set Heating Set Temperature

39 2SetHeatingTempCommand_XXX AV ℃(℉) 4 ℃ ~ 32 ℃ (40 ℉ ~ 90 ℉)
(Setting)

2Set Heating Set Temperature

40 2SetHeatingTempStatus_XXX AI ℃(℉) 4 ℃ ~ 32 ℃ (40 ℉ ~ 90 ℉)
(Status)

2Set Cooling Upper Temperature

41 2SetCoolingUpperLimitCommand_XXX AV ℃(℉) 10 ℃ ~ 37.5 ℃ (50 ℉ ~ 99 ℉)
(Setting)

2Set Cooling Upper Temperature

42 2SetCoolingUpperLimitStatus_XXX AI ℃(℉) 10 ℃ ~ 37.5 ℃ (50 ℉ ~ 99 ℉)
(Status)

2Set Cooling Lower Temperature

43 2SetHeatingUpperLimitCommand_XXX AV ℃(℉) 4 ℃ ~ 32 ℃ (40 ℉ ~ 90 ℉)
(Setting)

2Set Cooling Lower Temperature

44 2SetHeatingUpperLimitStatus_XXX AI ℃(℉) 4 ℃ ~ 32 ℃ (40 ℉ ~ 90 ℉)
(Status)

2Set Heating Upper Temperature

45 2SetCoolingLowerLimitCommand_XXX AV ℃(℉) 10 ℃ ~ 37.5 ℃ (50 ℉ ~ 99 ℉)
(Setting)

2Set Heating Upper Temperature

46 2SetCoolingLowerLimitStatus_XXX AI ℃(℉) 10 ℃ ~ 37.5 ℃ (50 ℉ ~ 99 ℉)
(Status)

2Set Heating Lower Temperature

47 2SetHeatingLowerLimitCommand_XXX AV ℃(℉) 4 ℃ ~ 32 ℃ (40 ℉ ~ 90 ℉)
(Setting)

2Set Heating Lower Temperature

48 2SetHeatingLowerLimitStatus_XXX AI ℃(℉) 4 ℃ ~ 32 ℃ (40 ℉ ~ 90 ℉)
(Status)

49 Thermo Status (Status) ThermoStatus_XXX BI - Stop (0) Start (1) - - - - -

Accumulated Gas Distribution 100

50 AccumulatedGas(100 Watt)_XXX AI Gas values
(Status) Liter

Enabled
51 Dust Sensor Available (Status) DustSensorAvail_XXX BI - Disabled (0) - - - - -
(1)

52 Air Cleaning Opereration (Setting) AirCleaningOperCommand_XXX BO - Stop (0) Start (1) - - - - -

53 Air Cleaning Opereration (Status) AirCleaningOperStatus_XXX BI - Stop (0) Start (1) - - - - -

54 PM10 (Status) FineDustStatus_XXX AI µg/m³

55 PM2.5 (Status) UltraFineDustStatus_XXX AI µg/m³

56 PM1.0 (Status) SuperUltraFineDustStatus_XXX AI µg/m³

57 Humidity (Status) HumidityStatus_XXX AI %

Enabled
58 Comfort Cooling Available (Status) ComfortCoolingAvail_XXX BI - Disabled (0) - - - - -
(1)

Comfort Cooling Opereration

59 ComfortCoolingOperCommand_XXX BO - Stop (0) Start (1) - - - - -
(Setting)

Comfort Cooling Opereration

60 ComfortCoolingOperStatus_XXX BI - Stop (0) Start (1) - - - - -
(Status)

61 Comfort Cooling Step (Setting) ComfortCoolingStepCommand_XXX AV - 1 step ~ 3 step

62 Comfort Cooling Step (Status) ComfortCoolingStepStatus_XXX AI - 1 step ~ 3 step

Enabled
63 Human Detection Available (Status) HumanDetectionAvail_XXX BI - Disabled (0) - - - - -
(1)

Human Detection Opereration OnOffSaving TempSaving

64 HumanDetectionOperCommand_XXX MO - - Stop (1) - - -
(Setting) (2) (3)

Human Detection Opereration OnOffSaving TempSaving

65 HumanDetectionOperStatus_XXX MI - - Stop (1) - - -
(Status) (2) (3)

66 Human Detection Wind (Setting) HumanDetectionWindCommand_XXX MO - - Stop (1) Direct (2) Indirect (3) - - -

67 Human Detection Wind (Status) HumanDetectionWindStatus_XXX MI - - Stop (1) Direct (2) Indirect (3) - - -

30 min 60 min 90 min

68 Human Detection Time (Setting) HumanDetectionTimeCommand_XXX MO - - 5 min (1) 10 min (2) 15 min (3)
(4) (5) (6)

30 min 60 min 90 min

69 Human Detection Time (Status) HumanDetectionTimeStatus_XXX MI - - 5 min (1) 10 min (2) 15 min (3)
(4) (5) (6)
 User Manual

ERV Object List

One ERV has the following list of points. Some points may not be supported depending on the product.

Object Text- Text- Text-

Point Description Object Name(_XXX : Address) Unit Text-0 Text-1 Text-2 Text-3
Type 4 5 6

1 On/Off (Setting) StartStopCommand_XXX BO - Stop (0) Start (1) - - - - -

2 On/Off (Status) StartStopStatus_XXX BI - Stop (0) Start (1) - - - - -

Permit
3 Lock (Setting) LockCommand_XXX BO - Prohibit (1) - - - - -
(0)

Permit
4 Lock (Status) LockStatus_XXX BI - Prohibit (1) - - - - -
(0)

5 Filter Sign FilterSign_XXX BI - Off (0) On (1) - - - - -

6 Filter Sign reset FilterSignReset_XXX BV - - Reset (1) - - - - -

Heat Exchange
7 Operation Mode (Setting) AirConModeCommand_XXX MO - - Auto (2) Normal (3) - - -
(1)

Heat Exchange
8 Operation Mode (Status) AirConModeStatus_XXX MI - - Auto (2) Normal (3) - - -
(1)

9 - - - - -

10 - - - - -

Super High Auto

11 Fan Speed (Setting) FanSpeedCommand_XXX MO - - Low (1) High (2) - -
(3) (4)

Super High Auto

12 Fan Speed (Status) FanSpeedStatus_XXX MI - - Low (1) High (2) - -
(3) (4)

13 Set Room Temperature SetRoomTemp_XXX AV ℃(℉) 16 ℃ ~ 30 ℃ (60 ℉ ~ 86 ℉)

14 Set Temperature (Status) RoomTemp_XXX AI ℃(℉)

Normal
15 Alarm Alarm_XXX BI - Abnormal (1) - - - - -
(0)

16 Error Code MalfunctionCode_XXX AI - Please refer to LG error code list.

Energy saving
17 User Mode (Setting) UserModeCommand_XXX MO - - Quick fresh (1) Clear (3) - - -
(2)

Energy saving
18 User Mode (Status) UserModeStatus_XXX MI - - Quick fresh (1) Clear (3) - - -
(2)

19 Room Temperature SetTempStatus_XXX AI ℃(℉) 16 ℃ ~ 30 ℃ (60 ℉ ~ 86 ℉)

Accumulated Power Distribution 100

20 Accumulated power(100 Watt)_XXX AI Wattage values
(Status) Watt

21 AC Operation Mode (Setting) UserModeAcCommand_XXX MO - - Cool (1) Auto (2) Heat (3) - - -

22 AC Operation Mode (Status) UserModeStatus_XXX MI - - Cool (1) Auto (2) Heat (3) - - -

23 AC ON/OFF (Setting) UserModeAcCommand_XXX BO - Stop (0) Start (1) - - - - -

24 AC ON/OFF (Status) UserModeAcStatus_XXX BI - Stop (0) Start (1) - - - - -

25 AC Humidify (Setting) HumidifierOperCommand_XXX BO - Stop (0) Start (1) - - - - -

26 AC Humidify (Status) HumidifierOperStatus_XXX BI - Stop (0) Start (1) - - - - -

Disabled
27 Partial Lock Available (Status) PatialLockAvail_XXX BI - Enabled (1) - - - - -
(0)

28 Set Upper Temperature (Setting) TempRangeUpperLimitCommand_XXX AV ℃(℉) 18 ℃ ~ 30 ℃ (64 ℉ ~ 86 ℉)

29 Set Upper Tempaerature (Status) TempRangeLowerLimitCommand_XXX AV ℃(℉) 16 ℃ ~ 30 ℃ (60 ℉ ~ 86 ℉)

30 Set Lower Temperature (Setting) TempRangeUpperLimitStatus_XXX AI ℃(℉) 18 ℃ ~ 30 ℃ (64 ℉ ~ 86 ℉)

31 Set Lower Temperature (Status) TempRangeLowerLimitStatus_XXX AI ℃(℉) 16 ℃ ~ 30 ℃ (60 ℉ ~ 86 ℉)

Permit
32 Mode Lock (Setting) ModeLockCommand_XXX BO - Prohibit (1) - - - - -
(0)

Permit
33 Mode Lock (Status) ModeLockStatus_XXX BI - Prohibit (1) - - - - -
(0)

Permit
34 Fan Lock (Setting) FanLockCommand_XXX BO - Prohibit (1) - - - - -
(0)

Permit
35 Fan Lock (Status) FanLockStatus_XXX BI - Prohibit (1) - - - - -
(0)
36 NTFC Available (Status) NtfcAvail_XXX BI - Disabled Enabled (1) - - - - -
(0)

37 NTFC Operation (Setting) NtfcOperCommand_XXX BO - Stop (0) Start (1) - - - - -

38 NTFC Operation (Status) NtfcOperStatus_XXX BI - Stop (0) Start (1) - - - - -

Permit
39 NTFC Lock (Setting) NtfcLockCommand_XXX BO - Prohibit (1) - - - - -
(0)

Permit
40 NTFC Lock (Status) NtfcLockStatus_XXX BI - Prohibit (1) - - - - -
(0)
 User Manual

AHU Object List

One AHU has the following list of points. Some points may not be supported depending on the product.

Object
Point Description Object Name(_XXX : Address) Unit Text-0 Text-1 Text-2 Text-3 Text-4 Text-5 Text-6
Type

1 On/Off (Setting) StartStopCommand_XXX BO - Stop (0) Start (1) - - - - -

2 On/Off (Status) StartStopStatus_XXX BI - Stop (0) Start (1) - - - - -

3 Lock (Setting) LockCommand_XXX BO - Permit (0) Prohibit (1) - - - - -

4 Lock (Status) LockStatus_XXX BI - Permit (0) Prohibit (1) - - - - -

5 Filter Sign FilterSign_XXX BI - Off (0) On (1) - - - - -

6 - - - - -

7 Operation Mode (Setting) AirConModeCommand_XXX MO - - Cool (1) Dry (2) Fan (3) Heat (4) Energy saving (5) -

8 Operation Mode (Status) AirConModeStatus_XXX MI - - Cool (1) Dry (2) Fan (3) Heat (4) Energy saving (5) -

9 - - - - -

10 - - - - -

11 Fan Speed (Setting) FanSpeedCommand_XXX MO - - High (1) Middle (2) Low (3) - - -

12 Fan Speed (Status) FanSpeedStatus_XXX MI - - High (1) Middle (2) Low (3) - - -

13 Set Room Temperature SetRoomTemp_XXX AV ℃(℉) 18 ℃ ~ 30 ℃ (64 ℉ ~ 86 ℉)

14 Set Temperature (Status) RoomTemp_XXX AI ℃(℉)

15 Alarm Alarm_XXX BI - Normal (0) Abnormal (1) - - - - -

16 Error Code MalfunctionCode_XXX AI - Please refer to LG error code list.

17 - - - - -

18 - - - - -

19 Room Temperature SetTempStatus_XXX AI ℃(℉) 18 ℃ ~ 30 ℃ (64 ℉ ~ 86 ℉)

20 FireAlarm (Setting) FireAlarmCommand_XXX BO - Off (0) On (1) - - - - -

21 FireAlarm (Status) FireAlarmStatus_XXX BI - Off (0) On (1) - - - - -

22 Humidity (Setting) SetHumidityCommand_XXX AV % 40 % ~ 60 %

23 Humidity (Status) SetHumidityStatus_XXX AI % 40 % ~ 60 %

24 Humidify ON/OFF (Setting) HumidifyCommand_XXX BO - Stop (0) Start (1) - - - - -

25 Humidify ON/OFF (Status) HumidifyStatus_XXX BI - Stop (0) Start (1) - - - - -

26 Auto Ventilation ON/OFF (Setting) AutoVentilCommand_XXX BO - Stop (0) Start (1) - - - - -

27 Auto Ventilation ON/OFF (Status) AutoVentilStatus_XXX BI - Stop (0) Start (1) - - - - -

28 Supply Unit Temperature (Status) SupplyTempStatus_XXX AI ℃(℉)

29 Outdoor Unit Temperature (Status) OutdoorTempStatus_XXX AI ℃(℉)

30 Mix Unit Temperature (Status) MixTempStatus_XXX AI ℃(℉)

31 Supply Unit Humidity (Status) SupplyHumidifyStatus_XXX AI %

32 Outdoor Unit Humidity (Status) OutdoorHumidifyStatus_XXX AI %

33 Ventilation Unit Humidity (Status) VentilHumidifyStatus_XXX AI %

34 CO2 Value (Status) CO₂ValueStatus_XXX AI - 0~255 (Real Value = Value*10, Example : In case Value is 20, CO2 is 20*10=200ppm)

35 Humidity Unit ON/OFF (Status) HumidifyUnitStatus_XXX BI - Stop (0) Start (1) - - - - -

36 Heating Unit ON/OFF (Status) HeaterUnitStatus_XXX BI - Stop (0) Start (1) - - - - -

37 Ventilator FAN ON/OFF (Status) VentilFanStatus_XXX BI - Stop (0) Start (1) - - - - -

38 Supply Unit FAN ON/OFF (Status) SupplyFanStatus_XXX BI - Stop (0) Start (1) - - - - -

39 Current OA Damper (Status) CurrOADamperStatus_XXX AI º 0 º ~ 90 º

40 Current EA Damper (Status) CurrEADamperStatus_XXX AI º 0 º ~ 90 º

41 Current Mix Damper (Status) CurrMixDamperStatus_XXX AI º 0 º ~ 90 º

42 Cooling OA Damper (Setting) OADamperCoolCommand_XXX AV º 0 º ~ 90 º

43 Cooling OA Damper (Status)) OADamperCoolStatus_XXX AI º 0 º ~ 90 º

44 Cooling EA Damper (Setting) EADamperCoolCommand_XXX AV º 0 º ~ 90 º

45 Cooling EA Damper (Status)) EADamperCoolStatus_XXX AI º 0 º ~ 90 º

46 Cooling Mix Damper (Setting) MixDamperCoolCommand_XXX AV º 0 º ~ 90 º

47 Cooling Mix Damper (Status)) MixDamperCoolStatus_XXX AI º 0 º ~ 90 º

48 Heating OA Damper (Setting) OADamperHeatCommand_XXX AV º 0 º ~ 90 º

49 Heating OA Damper (Status)) OADamperHeatStatus_XXX AI º 0 º ~ 90 º

50 Heating EA Damper (Setting) EADamperHeatCommand_XXX AV º 0 º ~ 90 º

51 Heating EA Damper (Status)) EADamperHeatStatus_XXX AI º 0 º ~ 90 º

52 Heating Mix Damper (Setting) MixDamperHeatCommand_XXX AV º 0 º ~ 90 º

53 Heating Mix Damper (Status)) MixDamperHeatStatus_XXX AI º 0 º ~ 90 º

54 FAN OA Damper (Setting) OADamperFanCommand_XXX AV º 0 º ~ 90 º

55 FAN OA Damper (Status)) OADamperFanStatus_XXX AI º 0 º ~ 90 º

56 FAN EA Damper (Setting) EADamperFanCommand_XXX AV º 0 º ~ 90 º

57 FAN EA Damper (Status)) EADamperFanStatus_XXX AI º 0 º ~ 90 º

58 FAN Mix Damper (Setting) MixDamperFanCommand_XXX AV º 0 º ~ 90 º

59 FAN Mix Damper (Status)) MixDamperFanStatus_XXX AI º 0 º ~ 90 º

 User Manual

Outdoor unit Object List

One outdoor unit has the following list of points. Some points may not be supported depending on the product.

Object Text- Text- Text-

Point Description Object Name(_XXX : Address) Unit Text-0 Text-1 Text-2 Text-3
Type 4 5 6

1 Compressor Operation CompressorOperation_XXX BI - Stop (0) Start (1) - - - - -

R410A
2 Refrigerant Type RefrigerantType_XXX MI - - R407C (1) R22 (2) - - -
(3)

3 Fan1 Frequency Fan1Frequency_XXX AI rpm

4 High Pressure HighPressure_XXX AI kPa

5 Low Pressure LowPressure_XXX AI kPa

6 Compressor Suction Temp CompressorSunctionTemp_XXX AI ℃(℉)

7 Liquid Pipe Temp LiquidPipeTemp_XXX AI ℃(℉)

8 Heat Exchange Temp HeatExchangeTemp_XXX AI ℃(℉)

9 Outdoor Unit EEV OutdoorUnitEEV_XXX AI -

10 Over-cooler EEV Over-coolerEEV_XXX AI -

11 Hot Gas Valve HotGasValue_XXX BI - Off (0) On (1) - - - - -

12 Inverter Discharge Temp InverterDischargeTemp_XXX AI ℃(℉)

13 Air Temp AirTemp_XXX AI ℃(℉)

Cool
14 Operation Mode OperationMode_XXX MI - - Stop (1) Heat (3) - - -
(2)

15 Error Code ErrorCode_XXX AI 0~255

16 Inverter1 Compressor Frequency Inverter1CompressorFrequency_XXX AI rpm

17 Inverter2 Compressor Frequency Inverter2CompressorFrequency_XXX AI rpm

18 Fan2 Frequency Fan2Frequency_XXX AI rpm

19 Inverter2 Discharge Temp Inverter2DischargeTemp_XXX AI ℃(℉)

20 Std1 Discharge Temp Std1DischargeTemp_XXX AI ℃(℉)

21 Std2 Discharge Temp Std2DischargeTemp_XXX AI ℃(℉)

22 Upper Hex Temp UpperHexTemp_XXX AI ℃(℉)

23 Lower Hex Temp LowerHexTemp_XXX AI ℃(℉)

24 Sub Cool Pipe In Temp SubCoolPipeInTemp_XXX AI ℃(℉)

25 Sub Cool Pipe Out Temp SubCoolPipeOutTemp_XXX AI ℃(℉)

26 Sub EEV Pulse SubEevPulse_XXX AI -

27 Oil Equalizing EEV OilEqualizingEEV_XXX AI -

28 Vapor Injection EEV1 ViEev1_XXX AI -

29 Vapor Injection EEV2 ViEev2_XXX AI -

30 Inverter1 Heater Inverter1Heater_XXX BI - Off (0) On (1) - - - - -

31 Inverter2 Heater Inverter2Heater_XXX BI - Off (0) On (1) - - - - -

Not Detect Oil Detect Oil

32 Inverter1 Oil Sensor Inverter1OilSensor_XXX BI - - - - - -
(0) (1)

Not Detect Oil Detect Oil

33 Inverter2 Oil Sensor Inverter2OilSensor_XXX BI - - - - - -
(0) (1)

34 Inverter1 Backup Inverter1Backup_XXX BI - Not Used (0) Used (1) - - - - -

35 Inverter2 Backup Inverter2Backup_XXX BI - Not Used (0) Used (1) - - - - -

36 DDC DDC_XXX BI - Off (0) On (1) - - - - -

37-64 Additional Point for Master Outdoor Unit

65 (Slave1) Compressor Operation CompressorOperation_XXX BI - Stop (0) Start (1) - - - - -

R410A
66 (Slave1) Refrigerant Type RefrigerantType_XXX MI - - R407C (1) R22 (2) - - -
(3)

67 (Slave1) Fan1 Frequency Fan1Frequency_XXX AI rpm

68 (Slave1) High Pressure HighPressure_XXX AI kPa

69 (Slave1) Low Pressure LowPressure_XXX AI kPa

70 (Slave1) Compressor Suction Temp CompressorSunctionTemp_XXX AI ℃(℉)

71 (Slave1) Liquid Pipe Temp LiquidPipeTemp_XXX AI ℃(℉)

72 (Slave1) Heat Exchange Temp HeatExchangeTemp_XXX AI ℃(℉)

73 (Slave1) Outdoor Unit EEV OutdoorUnitEEV_XXX AI -

74 (Slave1) Over-cooler EEV Over-coolerEEV_XXX AI -

75 (Slave1) Hot Gas Valve HotGasValue_XXX BI - Off (0) On (1) - - - - -

76 (Slave1) Inverter Discharge Temp InverterDischargeTemp_XXX AI ℃(℉)

77 (Slave1) Air Temp AirTemp_XXX AI ℃(℉)

Cool
78 (Slave1) Operation Mode OperationMode_XXX MI - - Stop (1) Heat (3) - - -
(2)

79 (Slave1) Error Code ErrorCode_XXX AI 0~255

(Slave1) Inverter1 Compressor

80 Inverter1CompressorFrequency_XXX AI rpm
Frequency

(Slave1) Inverter2 Compressor

81 Inverter2CompressorFrequency_XXX AI rpm
Frequency

82 (Slave1) Fan2 Frequency Fan2Frequency_XXX AI rpm

83 (Slave1) Inverter2 Discharge Temp Inverter2DischargeTemp_XXX AI ℃(℉)

84 (Slave1) Std1 Discharge Temp Std1DischargeTemp_XXX AI ℃(℉)

85 (Slave1) Std2 Discharge Temp Std2DischargeTemp_XXX AI ℃(℉)

86 (Slave1) Upper Hex Temp UpperHexTemp_XXX AI ℃(℉)

87 (Slave1) Lower Hex Temp LowerHexTemp_XXX AI ℃(℉)

88 (Slave1) Sub Cool Pipe In Temp SubCoolPipeInTemp_XXX AI ℃(℉)

89 (Slave1) Sub Cool Pipe Out Temp SubCoolPipeOutTemp_XXX AI ℃(℉)

90 (Slave1) Sub EEV Pulse SubEevPulse_XXX AI -

91 (Slave1) Oil Equalizing EEV OilEqualizingEEV_XXX AI -

92 (Slave1) Vapor Injection EEV1 ViEev1_XXX AI -

93 (Slave1) Vapor Injection EEV2 ViEev2_XXX AI -

94 (Slave1) Inverter1 Heater Inverter1Heater_XXX BI - Off (0) On (1) - - - - -

95 (Slave1) Inverter2 Heater Inverter2Heater_XXX BI - Off (0) On (1) - - - - -

Not Detect Oil Detect Oil

96 (Slave1) Inverter1 Oil Sensor Inverter1OilSensor_XXX BI - - - - - -
(0) (1)

Detect Oil
Not Detect Oil
97 (Slave1) Inverter2 Oil Sensor Inverter2OilSensor_XXX BI - (1) - - - - -
(0)

98 (Slave1) Inverter1 Backup Inverter1Backup_XXX BI - Not Used (0) Used (1) - - - - -

99 (Slave1) Inverter2 Backup Inverter2Backup_XXX BI - Not Used (0) Used (1) - - - - -

100 (Slave1) DDC DDC_XXX BI - Off (0) On (1) - - - - -

101-
Additional Point for Slave1 Outdoor Unit
128

129 (Slave2) Compressor Operation CompressorOperation_XXX BI - Stop (0) Start (1) - - - - -

R410A
130 (Slave2) Refrigerant Type RefrigerantType_XXX MI - - R407C (1) R22 (2) - - -
(3)

131 (Slave2) Fan1 Frequency Fan1Frequency_XXX AI rpm

132 (Slave2) High Pressure HighPressure_XXX AI kPa

133 (Slave2) Low Pressure LowPressure_XXX AI kPa

134 (Slave2) Compressor Suction Temp CompressorSunctionTemp_XXX AI ℃(℉)

135 (Slave2) Liquid Pipe Temp LiquidPipeTemp_XXX AI ℃(℉)

136 (Slave2) Heat Exchange Temp HeatExchangeTemp_XXX AI ℃(℉)

137 (Slave2) Outdoor Unit EEV OutdoorUnitEEV_XXX AI -

138 (Slave2) Over-cooler EEV Over-coolerEEV_XXX AI -

139 (Slave2) Hot Gas Valve HotGasValue_XXX BI - Off (0) On (1) - - - - -

140 (Slave2) Inverter Discharge Temp InverterDischargeTemp_XXX AI ℃(℉)

141 (Slave2) Air Temp AirTemp_XXX AI ℃(℉)

Cool
142 (Slave2) Operation Mode OperationMode_XXX MI - - Stop (1) Heat (3) - - -
(2)

143 (Slave2) Error Code ErrorCode_XXX AI 0~255

 (Slave2) Inverter1 Compressor
144 Inverter1CompressorFrequency_XXX AI rpm
Frequency

(Slave2) Inverter2 Compressor

145 Inverter2CompressorFrequency_XXX AI rpm
Frequency

146 (Slave2) Fan2 Frequency Fan2Frequency_XXX AI rpm

147 (Slave2) Inverter2 Discharge Temp Inverter2DischargeTemp_XXX AI ℃(℉)

148 (Slave2) Std1 Discharge Temp Std1DischargeTemp_XXX AI ℃(℉)

149 (Slave2) Std2 Discharge Temp Std2DischargeTemp_XXX AI ℃(℉)

150 (Slave2) Upper Hex Temp UpperHexTemp_XXX AI ℃(℉)

151 (Slave2) Lower Hex Temp LowerHexTemp_XXX AI ℃(℉)

152 (Slave2) Sub Cool Pipe In Temp SubCoolPipeInTemp_XXX AI ℃(℉)

153 (Slave2) Sub Cool Pipe Out Temp SubCoolPipeOutTemp_XXX AI ℃(℉)

154 (Slave2) Sub EEV Pulse SubEevPulse_XXX AI -

155 (Slave2) Oil Equalizing EEV OilEqualizingEEV_XXX AI -

156 (Slave2) Vapor Injection EEV1 ViEev1_XXX AI -

157 (Slave2) Vapor Injection EEV2 ViEev2_XXX AI -

158 (Slave2) Inverter1 Heater Inverter1Heater_XXX BI - Off (0) On (1) - - - - -

159 (Slave2) Inverter2 Heater Inverter2Heater_XXX BI - Off (0) On (1) - - - - -

Not Detect Oil Detect Oil

160 (Slave2) Inverter1 Oil Sensor Inverter1OilSensor_XXX BI - - - - - -
(0) (1)

Not Detect Oil Detect Oil

161 (Slave2) Inverter2 Oil Sensor Inverter2OilSensor_XXX BI - - - - - -
(0) (1)

162 (Slave2) Inverter1 Backup Inverter1Backup_XXX BI - Not Used (0) Used (1) - - - - -

163 (Slave2) Inverter2 Backup Inverter2Backup_XXX BI - Not Used (0) Used (1) - - - - -

164 (Slave2) DDC DDC_XXX BI - Off (0) On (1) - - - - -

165-
Additional Point for Slave2 Outdoor Unit
192

193 (Slave3) Compressor Operation CompressorOperation_XXX BI - Stop (0) Start (1) - - - - -

R410A
194 (Slave3) Refrigerant Type RefrigerantType_XXX MI - - R407C (1) R22 (2) - - -
(3)

195 (Slave3) Fan1 Frequency Fan1Frequency_XXX AI rpm

196 (Slave3) High Pressure HighPressure_XXX AI kPa

197 (Slave3) Low Pressure LowPressure_XXX AI kPa

198 (Slave3) Compressor Suction Temp CompressorSunctionTemp_XXX AI ℃(℉)

199 (Slave3) Liquid Pipe Temp LiquidPipeTemp_XXX AI ℃(℉)

200 (Slave3) Heat Exchange Temp HeatExchangeTemp_XXX AI ℃(℉)

201 (Slave3) Outdoor Unit EEV OutdoorUnitEEV_XXX AI -

202 (Slave3) Over-cooler EEV Over-coolerEEV_XXX AI -

203 (Slave3) Hot Gas Valve HotGasValue_XXX BI - Off (0) On (1) - - - - -

204 (Slave3) Inverter Discharge Temp InverterDischargeTemp_XXX AI ℃(℉)

205 (Slave3) Air Temp AirTemp_XXX AI ℃(℉)

Cool
206 (Slave3) Operation Mode OperationMode_XXX MI - - Stop (1) Heat (3) - - -
(2)

207 (Slave3) Error Code ErrorCode_XXX AI 0~255

(Slave3) Inverter1 Compressor

208 Inverter1CompressorFrequency_XXX AI rpm
Frequency

(Slave3) Inverter2 Compressor

209 Inverter2CompressorFrequency_XXX AI rpm
Frequency

210 (Slave3) Fan2 Frequency Fan2Frequency_XXX AI rpm

211 (Slave3) Inverter2 Discharge Temp Inverter2DischargeTemp_XXX AI ℃(℉)

212 (Slave3) Std1 Discharge Temp Std1DischargeTemp_XXX AI ℃(℉)

213 (Slave3) Std2 Discharge Temp Std2DischargeTemp_XXX AI ℃(℉)

214 (Slave3) Upper Hex Temp UpperHexTemp_XXX AI ℃(℉)

215 (Slave3) Lower Hex Temp LowerHexTemp_XXX AI ℃(℉)

216 (Slave3) Sub Cool Pipe In Temp SubCoolPipeInTemp_XXX AI ℃(℉)

217 (Slave3) Sub Cool Pipe Out Temp SubCoolPipeOutTemp_XXX AI ℃(℉)

218 (Slave3) Sub EEV Pulse SubEevPulse_XXX AI -

219 (Slave3) Oil Equalizing EEV OilEqualizingEEV_XXX AI -

220 (Slave3) Vapor Injection EEV1 ViEev1_XXX AI -

221 (Slave3) Vapor Injection EEV2 ViEev2_XXX AI -

222 (Slave3) Inverter1 Heater Inverter1Heater_XXX BI - Off (0) On (1) - - - - -

223 (Slave3) Inverter2 Heater Inverter2Heater_XXX BI - Off (0) On (1) - - - - -

Not Detect Oil Detect Oil

224 (Slave3) Inverter1 Oil Sensor Inverter1OilSensor_XXX BI - - - - - -
(0) (1)

Not Detect Oil Detect Oil

225 (Slave3) Inverter2 Oil Sensor Inverter2OilSensor_XXX BI - - - - - -
(0) (1)

226 (Slave3) Inverter1 Backup Inverter1Backup_XXX BI - Not Used (0) Used (1) - - - - -

227 (Slave3) Inverter2 Backup Inverter2Backup_XXX BI - Not Used (0) Used (1) - - - - -

228 (Slave3) DDC DDC_XXX BI - Off (0) On (1) - - - - -

229-
Additional Point for Slave3 Outdoor Unit
256
 User Manual

Heating Object List

One Heating has the following list of points. Some points may not be supported depending on the product.

Object Text- Text- Text-

Point Description Object Name(_XXX : Address) Unit Text-0 Text-1 Text-2 Text-3
Type 4 5 6

1 On/Off (Setting) StartStopCommand_XXX BO - Stop (0) Start (1) - - - - -

2 On/Off (Status) StartStopStatus_XXX BI - Stop (0) Start (1) - - - - -

3 Lock (Setting) LockCommand_XXX BO - Permit (0) Prohibit (1) - - - - -

4 Lock (Status) LockStatus_XXX BI - Permit (0) Prohibit (1) - - - - -

Heat Auto
5 Operation Mode (Setting) AirConModeCommand_XXX MO - - Cool (1) - - -
(2) (3)

Heat Auto
6 Operation Mode (Status) AirConModeStatus_XXX MI - - Cool (1) - - -
(2) (3)

7 Set Room Temperature (Setting) SetRoomTempCommand_XXX AV ℃(℉) 16 ℃ ~ 30 ℃ (60 ℉ ~ 86 ℉)

8 Set Room Temperature (Status) SetRoomTempStatus_XXX AI ℃(℉) 16 ℃ ~ 30 ℃ (60 ℉ ~ 86 ℉)

9 Set Hot Water Temperature (Setting) SetHotWaterTempCommand_XXX AV ℃(℉) 30 ℃ ~ 80 ℃ (86 ℉ ~ 176 ℉)

10 Set Hot Water Temperature (Status) SetHotWaterTempStatus_XXX AI ℃(℉) 30 ℃ ~ 80 ℃ (86 ℉ ~ 176 ℉)

11 Set PipeOut Water Temperature (Setting) SetPipeOutWaterTempCommand_XXX AV ℃(℉) 6 ℃ ~ 80 ℃ (42 ℉ ~ 176 ℉)

12 Set PipeOut Water Temperature (Status) SetPipeOutWaterTempStatus_XXX AI ℃(℉) 6 ℃ ~ 80 ℃ (42 ℉ ~ 176 ℉)

Setting Temperature Reference

13 AirWaterFlag_XXX BI - Air (0) Water (1) - - - - -
(Air/Water)

Normal Hot Water Only

14 Hot Water Only Mode HotWaterOnlyFlag_XXX BI - - - - - -
(0) (1)

15 Set Temperature (Status) RoomTemp_XXX AI ℃(℉)

Normal
16 Alarm Alarm_XXX BI - Abnormal (1) - - - - -
(0)

17 Error Code MalfunctionCode_XXX AI - Please refer to LG error code list.

18 HotWater On/Off (Setting) HotWaterCommand_XXX BO - Stop (0) Start (1) - - - - -

19 HotWater On/Off (Status) HotWaterStatus_XXX BI - Stop (0) Start (1) - - - - -

20 Pipe Inlet Temperature Status PipeInTempStatus_XXX AI ℃(℉)

21 Water Tank Temperature Status TankTempStatus_XXX AI ℃(℉)

22 Solar Temperature Status SolarTempStatus_XXX AI ℃(℉)

23 Pipe Outlet Temperature tatus PipeOutTempStatus_XXX AI ℃(℉)

100
24 Accumulated Power Distribution (Status) Accumulated power(100 Watt)_XXX AI Wattage values
Watt
 User Manual

General Object List

This is the list of BACnet objects provided for the general information. Some points may not be supported depending on the product.

Object
Point Description Object Name(_XXX : Address) Unit Text-0 Text-1 Text-2 Text-3 Text-4 Text-5 Text-6
Type

1 All Unit Run/Stop (Setting) AllStartStopCommand BO - Stop (0) Start (1) - - - - -

2 All Unit Set Room Temperature (Setting) AllSetRoomTempCommand AV ℃(℉) 18 ℃ ~ 30 ℃ (64 ℉ ~ 86 ℉)

3 All Unit Temperature Lock (Setting) AllTempLockCommand BO - Permit (0) Prohibit (1) - - - - -

4 Total Accumulated Power (Status) TotalAccumulatedPower AI 100 Watt Wattage values

5 Peak Control Operation (Setting) PeakStartStopCommand BO - Stop (0) Start (1) - - - - -

6 Peak Control Operation (Status) PeakStartStopStatus BI - Stop (0) Start (1) - - - - -

7 Peak Shift Time(Setting) PeakShiftTimeCommand AV min 5 min ~ 15 min

8 Peak Shift Time(Status) PeakShiftTimeStatus AI min 5 min ~ 15 min

9 Peak Target Ratio(Setting) PeakTargetCommand AV % 0 % ~ 100 %

10 Peak Target Ratio(Status) PeakTargetStatus AI % 0 % ~ 100 %

11 Peak Current Running Ratio(Status) PeakCurrentStatus AI % 0 % ~ 100 %

12 Remote Shutdown(Setting) RemoteShutDownCommand BO - Normal (0) Shutdown (1) - - - - -

13 Temperature Unit Setting (Setting) TempUnitCommand BO - ℃ (0) ℉ (1) - - - - -

14 Temperature Unit Setting (Status) TempUnitStatus BI - ℃ (0) ℉ (1) - - - - -

 User Manual

BIBBs
BACnet Interoperability Building Blocks

Alarm and Event Management, Scheduling, Trending and Network Security BIBBs are not supported.

Data Sharing BIBBs

(□:Not supported, ■: Supported)

BIBB Type Supported Service Initiate Execute

DS-RP-A Data Sharing-ReadProperty-A □ ReadProperty X

DS-RP-B Data Sharing-ReadProperty-B ■ ReadProperty X

DS-RPM-A Data Sharing-ReadPropertyMultiple-A □ ReadPropertyMultiple X

DS-RPM-B Data Sharing-ReadPropertyMultiple-B ■ ReadPropertyMultiple X

DS-RPC-A Data Sharing-ReadPropertyConditional-A □ ReadPropertyConditional X

DS-RPC-B Data Sharing-ReadPropertyConditional-B □ ReadPropertyConditional X

DS-WP-A Data Sharing-WriteProperty-A □ WriteProperty X

DS-WP-B Data Sharing-WriteProperty-B ■ WriteProperty X

DS-WPM-A Data Sharing-WritePropertyMultiple-A □ WritePropertyMultiple X

DS-WPM-B Data Sharing-WritePropertyMultiple-B ■ WritePropertyMultiple X

SubscribeCOV X

DS-COV-A Data Sharing-Change Of Value-A □ ConfirmedCOVNotification X

UnconfirmedCOVNotification X

SubscribeCOV X

DS-COV-B Data Sharing-Change Of Value-B ■ ConfirmedCOVNotification X

UnconfirmedCOVNotification X

SubscribeCOVProperty X

DS-COVP-A Data Sharing-Change Of Value Property-A □ ConfirmedCOVNotification X

UnconfirmedCOVNotification X

SubscribeCOVProperty X

DS-COVP-B Data Sharing-Change Of Value Property-B □ ConfirmedCOVNotification X

UnconfirmedCOVNotification X

DS-COVU-A Data Sharing-Change Of Value Unsubscribed-A □ UnconfirmedCOVNotification X

DS-COVU-B Data Sharing-Change Of Value Unsubscribed-B □ UnconfirmedCOVNotification X

Device and Network Management BIBBs

(□:Not supported, ■: Supported)

BIBB Type Supported Service Initiate Execute

Who-Is X
DM-DDB-A Device Management-Dynamic Device Binding-A □
I-Am X

Who-Is X
DM-DDB-B Device Management-Dynamic Device Binding-B ■
I-Am X

Who-Has X
DM-DOB-A Device Management-Dynamic Object Binding-A □
I-Have X

Who-Has X
DM-DOB-B Device Management-Dynamic Object Binding-B ■
I-Have X

DM-DCC-A Device Management-DeviceCommunicationControl-A □ DeviceCommunicationControl X

DM-DCC-B Device Management-DeviceCommunicationControl-B ■ DeviceCommunicationControl X

DM-TS-A Device Management-TimeSynchronization-A □ TimeSynchronization X

DM-TS-B Device Management-TimeSynchronization-B ■ TimeSynchronization X

 User Manual

PICS
BACnet Protocol Implementation Conformance Statement

Vendor Name

LG Electronics Inc.

Product Name

AC Manager 5

Product Description

This gateway converts between BACnet IP and RS-485 LGAP (LG Aircon protocol) allowing third party control and monitoring of the LG A/C system.

It has a built in web server that does not require any additional software.

BACnet Standardized Device Profile (Annex L)

BACnet Application Specific Controller (B-ASC)

Segmentation Capability

Segmented responses supported Window Size - 64

Standard Object Types Supported

Dynamically Dynamically Writable

Object-Type Optional Properties Supported
Creatable Deletable Properties

Location, Description, Max Segments Accepted, APDU Segment Timeout, Active COV Subscriptions,
Device No No N/A
Profile Name

Analog Input No No Description, Reliability, Min Pres Value, Max Pres Value, Resolution, COV Increment N/A

Analog Value No No Description, Reliability, Resolution, COV Increment Present_Value

Binary Input No No Description, Reliability, Inactive Text, Active Text N/A

Binary Output No No Description, Reliability, Inactive Text, Active Text Present_Value

No No Present_Value
Binary Value Description, Reliability, Inactive Text, Active Text

Multi-State
No No Description, Reliability, State Text N/A
Input

Multi-State
No No Description, Reliability, State Text Present_Value
Output

Data Link Layer Options

BACnet IP, (Annex J), Foreign Device - IPv4 only, IPv6 not supported

Device Address Binding

Static device binding is not supported.

Character Sets Supported

ANSI x 3.4
 User Manual

Modbus Commission
Commissioning is the process of verifying the subsystems to achieve the owner's project requirements as intended by the building owner and as designed by the building
architects and engineers.

After AC Manager 5 installation, you can check the operation status of the device by using the web function before connection with the BMS system.

Creating of the Points. This is NOT to be done by LG since it is directly related to the BMS side. The BMS engineer is to carry out the engineering of the Point, however LG is
responsible for providing the method of how the Points are calculated.

Precautions
To use the Modbus feature, you must select [Settings] > [BACnet/Modbus Setting] > [Modbus TCP enable] as Set.

In case of installing 2 or more AC Manager 5, you must change [Settings] > [BACnet/Modbus Setting] > [Vnet Number Setting] so that the Vnet Numbers are not
duplicate among AC Manager 5.

The Vnet number is used as a Slave ID of the Modbus protocol and can be set to a value from 1 to 247.

The Read Single Coils command (Function Code 1) can read up to 2,000 commands at a time. The Read Holding Registers command (Function Code 3) can read up to 125
at a time.
 User Manual

Supported Function Codes

The Modbus function codes supported by AC Manager 5 are as follows:

Refer to the Register List page for controlled/monitored items supported by each function code.

0x01

0x03

0x05

0x06
 User Manual

Modbus Register List

It describes the Modbus Register List provided by AC Manager 5.

Definition of Register Address

Indoor Unit Register List

ERV Register List

AHU Register List

Heating Register List

 User Manual

Definition of Register Address

The Register Address of each device is assigned as follows.

Protocol Configuration

Register No.

Example of Register Address

Product Type Product Address Point Function Register Address

Description of Register
(Hexadecimal) (Hexadecimal) (Hexadecimal) Code(Hexadecimal) (Hexadecimal)

IDU Address 0x00, On/Off 0x0 0x00 0x1 0x1 / 0x5 0x0000

IDU Address 0x00, Operation Mode 0x0 0x00 0x1 0x3 / 0x6 0x0000

IDU Address 0x1B, On/Off 0x0 0x1B 0x1 0x1 / 0x5 0x01B0

IDU Address 0x1B, Operation Mode 0x0 0x1B 0x1 0x3 / 0x6 0x01B0

ERV Address 0x00, On/Off 0x4 0x00 0x1 0x1 / 0x5 0x4000

ERV Address 0x00, Operation Mode 0x4 0x00 0x1 0x3 / 0x6 0x4000

ERV Address 0x1B, On/Off 0x4 0x1B 0x1 0x1 / 0x5 0x41B0

ERV Address 0x1B, Operation Mode 0x4 0x1B 0x1 0x3 / 0x6 0x41B0

AHU Address 0x00, On/Off 0x8 0x00 0x1 0x1 / 0x5 0x8000

AHU Address 0x00, Operation Mode 0x8 0x00 0x1 0x3 / 0x6 0x8000

AHU Address 0x00, Current OA

0x8 0x01 0x1 0x3 0x8010
Damper

AHU Address 0x0F, On/Off 0x8 0x1E 0x1 0x1 / 0x5 0x81E0

AHU Address 0x0F, Operation Mode 0x8 0x1E 0x1 0x3 / 0x6 0x81E0

AHU Address 0x0F, Current OA

0x8 0x1F 0x1 0x3 0x81F0
Damper

Heating Address 0x00, On/Off 0xC 0x00 0x1 0x1 / 0x5 0xC000

Heating Address 0x00, Operation

0xC 0x00 0x1 0x3 / 0x6 0xC000
Mode

Heating Address 0x0F, On/Off 0xC 0x0F 0x1 0x1 / 0x5 0xC0F0

Heating Address 0x0F, Operation

0xC 0x0F 0x1 0x3 / 0x6 0xC0F0
Mode
 User Manual

Indoor Unit Register List

One Indoor unit has the following list of points. Some points may not be supported depending on the product.

Point Description Function Code Unit Text-0 Text-1 Text-2 Text-3 Text-4 Text-5 Text-6

1 On/Off 01/05 - Stop (0) Start (1) - - - - -

2 Swing 01/05 - Stop (0) Start (1) - - - - -

3 Lock 01/05 - Permit (0) Prohibit (1) - - - - -

4 Mode Lock 01/05 - Permit (0) Prohibit (1) - - - - -

5 Fan Lock 01/05 - Permit (0) Prohibit (1) - - - - -

6 Temp Lock 01/05 - Permit (0) Prohibit (1) - - - - -

7 Alarm 01 - Normal (0) Abnormal (1) - - - - -

1 Operation Mode 03/06 - - Cool (1) Dry (2) Fan (3) Auto (4) Heat (5) -

2 Fan Speed 03/06 - - Low (1) Middle (2) High (3) Auto (4) - -

3 Set Room Temperature 03/06 ℃ 16 ℃ ~ 30 ℃ (60 ℉ ~ 86 ℉)

4 Set Upper Temperature 03/06 ℃ 18 ℃ ~ 30 ℃ (64 ℉ ~ 86 ℉)

5 Set Lower Temperature 03/06 ℃ 16 ℃ ~ 30 ℃ (60 ℉ ~ 86 ℉)

6 Room Temperature 03 ℃

7 Error Code 03 - Please refer to LG error code list.

8 Accumulated Power(LOW) 03 -
Accumulated Power Value(100 Watt) = Accumulated Power(HIGH) X 65536 + Accumulated Power(LOW)
9 Accumulated Power(HIGH) 03 -

10 Accumulated Gas(LOW) 03 -
Accumulated Gas Value(100 Liter) = Accumulated Gas(HIGH) X 65536 + Accumulated Gas(LOW)
11 Accumulated Gas(HIGH) 03 -
 User Manual

ERV Register List

One Indoor unit has the following list of points. Some points may not be supported depending on the product.

Point Description Function Code Unit Text-0 Text-1 Text-2 Text-3 Text-4 Text-5 Text-6

1 On/Off 01/05 - Stop (0) Start (1) - - - - -

2 Lock 01/05 - Permit (0) Prohibit (1) - - - - -

3 Filter 01/05 - Off (0) On (1) - - - - -

4 Alarm 01 - Normal (0) Abnormal (1) - - - - -

5 AC ON/OFF 01/05 - Stop (0) Start (1) - - - - -

6 AC Humidify 01/05 - Stop (0) Start (1) - - - - -

1 Operation Mode 03/06 - - Heat Exchange (1) Auto (2) Normal (3) - - -

2 Fan Speed 03/06 - - Low (1) High (2) Super High (3) Auto (4) - -

3 User Mode 03/06 - - Quick fresh (1) Energy saving (2) Clear (3) - - -

4 Error Code 03 - Please refer to LG error code list.

5 AC Operation Mode 03/06 - - Cool (1) Auto (2) Heat (3) - - -

6 Set Room Temperature 03/06 ℃ 16 ℃ ~ 30 ℃ (60 ℉ ~ 86 ℉)

 User Manual

AHU Register List

One AHU has the following list of points. Some points may not be supported depending on the product.

Due to the limited number of points, One AHU device uses two product addresses. Refer to the Definition of Register Address page for the detail information.

Point Description Function Code Unit Text-0 Text-1 Text-2 Text-3 Text-4 Text-5 Text-6

Product Address X 2

1 On/Off 01/05 - Stop (0) Start (1) - - - - -

2 Lock 01/05 - Permit (0) Prohibit (1) - - - - -

3 Filter 01 - Off (0) On (1) - - - - -

4 FireAlarm 01/05 - Off (0) On (1) - - - - -

5 Humidity Oper 01/05 - Stop (0) Start (1) - - - - -

6 Auto Ventilation ON/OFF 01/05 - Stop (0) Start (1) - - - - -

7 Humidify ON/OFF Status 01 - Stop (0) Start (1) - - - - -

8 Heater ON/OFF Status 01 - Stop (0) Start (1) - - - - -

9 Ventilator FAN ON/OFF 01 - Stop (0) Start (1) - - - - -

10 Supply Unit FAN ON/OFF 01 - Stop (0) Start (1) - - - - -

11 Alarm 01 - Normal (0) Abnormal (1) - - - - -

1 Operation Mode 03/06 - - Cool (1) Dry (2) Fan (3) Energy saving (4) Heat (5) -

2 Set Room Temperature 03/06 ℃ 16 ℃ ~ 30 ℃ (60 ℉ ~ 86 ℉)

3 Supply Unit Temperature 03 ℃

4 Outdoor Unit Temperature 03 ℃

5 Ventilation UnitTemperature 03 ℃

6 Mix Unit Temperature 03 ℃

7 Set Humidity 03/06 % 40 % ~ 60 %

8 Supply Unit Humidity 03 %

9 Outdoor Unit Humidity 03 %

10 Ventilation Unit Humidity 03 %

11 CO2 Value 03 - 0~255 (Real Value = Value*10, Example : In case Value is 20, CO2 is 20*10=200ppm)

12 Error Code 03 - Please refer to LG error code list.

Product Address X 2 + 1

1 Current OA Damper 03 º

2 Current EA Damper 03 º

3 Current Mix Damper 03 º

4 Cooling OA Damper 03/06 º 0 º ~ 90 º

5 Cooling EA Damper 03/06 º 0 º ~ 90 º

6 Cooling Mix Damper 03/06 º 0 º ~ 90 º

7 Heating OA Damper 03/06 º 0 º ~ 90 º

8 Heating EA Damper 03/06 º 0 º ~ 90 º

9 Heating Mix Damper 03/06 º 0 º ~ 90 º

10 FAN OA Damper 03/06 º 0 º ~ 90 º

11 FAN EA Damper 03/06 º 0 º ~ 90 º

12 FAN Mix Damper 03/06 º 0 º ~ 90 º

 User Manual

Heating Register List

One Heating has the following list of points. Some points may not be supported depending on the product.

Point Description Function Code Unit Text-0 Text-1 Text-2 Text-3 Text-4 Text-5 Text-6

1 On/Off 01/05 - Stop (0) Start (1) - - - - -

2 Lock 01/05 - Permit (0) Prohibit (1) - - - - -

3 Setting Temperature Reference (Air/Water) 01 - Air (0) Water (1) - - - - -

4 Set Hot Water Temperature 01 - Normal (0) Hot Water Only (1) - - - - -

5 Alarm 01 - Normal (0) Abnormal (1) - - - - -

6 HotWater On/Off 01/05 - Stop (0) Start (1) - - - - -

1 Operation Mode 03/06 - - Cool (1) Heat (2) Auto (3) - - -

2 Set Room Temperature 03/06 ℃ 16 ℃ ~ 30 ℃ (60 ℉ ~ 86 ℉)

3 Hot Water Only Mode 03/06 ℃ 30 ℃ ~ 80 ℃ (86 ℉ ~ 176 ℉)

4 Set PipeOut Water Temperature 03/06 ℃ 6 ℃ ~ 80 ℃ (42 ℉ ~ 176 ℉)

5 Room Temperature 03 ℃

6 Error Code 03 - Please refer to LG error code list.

7 Pipe Inlet Temperature Status 03 ℃

8 Water Tank Temperature Status 03 ℃

9 Solar Temperature Status 03 ℃

10 Pipe Outlet Temperature tatus 03 ℃

 User Manual

LGE Open Source Software Notice OSSNotice-1106_ACS 5_1.40.0_180625

This product from LG Electronics, Inc. ("LGE") contains the open source software detailed below. Please refer to the indicated open source licenses (as are included following this notice) for the
terms and conditions of their use.

Open Source License Copyright

Copyright (c) 1996, Rik E. Faith

apmd 3.2.2-14 GPL-2.0
Copyright (c) 1999, Avery Pennarun

avahi 0.6.31 LGPL-2.1

bash 3.2.48 GPL-2.0 Copyright (c) 2007, 2009, 2011, 2014 Free Software Foundation, Inc.

Copyright (c) 1999-2004 by Erik Andersen.

BusyBox 1.23.1 GPL-2.0
Copyright (c) 2005-2006 Rob Landley

coreutils 6.9 GPL-2.0

Copyright (c) 2009 Thomas Renninger <[email protected]>, Novell Inc.

Copyright (c) 2008 Christian Kornacker <[email protected]>
cpufrequtils 008 GPL-2.0
Copyright (c) 2002-2003, by Mike Gleason, NcFTP Software.

Copyright (c) 2004 Michal Ludvig <[email protected]>, SuSE Labs

Copyright (c) Nikos Mavrogiannopoulos
cryptodev-linux 1.6 GPL-2.0 Copyright (c) Michael Weiser
Copyright (c) Phil Sutter
Copyright (c) Dmitry Kasatkin

Copyright (c) 2000 Eazel, Inc.

delphionrails trunk- Copyright (c) 2005-2006 Red Hat, Inc.
MPL-1.1
20120505-svn Copyright (c) 1991-1992 RSA Data Security, Inc.
Copyright (c) 1994-2008 Lua.org, PUC-Rio

dosfstools 2.11 GPL-2.0 (c) 2004-2015 Canonical Ltd

Copyright 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
e2fsprogs 1.42.9 GPL-2.0
2007, 2008, 2009, 2010 by Theodore Ts'o

Copyright (C) 1998 David S. Miller ([email protected])

Portions Copyright 2001 Sun Microsystems
Kernel 2.4 update Copyright 2001 Jeff Garzik
Wake-on-LAN,natsemi,misc support by Tim Hockin
Portions Copyright 2002 Intel
Portions Copyright (C) Sun Microsystems 2008
do_test support by Eli Kupermann
ETHTOOL_PHYS_ID support by Chris Leech
e1000 support by Scott Feldman
ethtool 3.16 GPL-2.0 e100 support by Wen Tao
ixgb support by Nicholas Nunley
amd8111e support by Reeja John
long arguments by Andi Kleen.
SMSC LAN911x support by Steve Glendinning
Rx Network Flow Control configuration support
Various features by Ben Hutchings ;
Copyright 2009, 2010 Solarflare Communications
MDI-X set support by Jesse Brandeburg
Copyright 2012 Intel Corporation

glibc 2.21 LGPL-2.1 Copyright (C) 1989-2013 Free Software Foundation, Inc.

i2c-tools 3.1.1 GPL-2.0

Copyright (c) 2008-2011 Freescale Semiconductor, Inc.

Imx-kobs 5.3 GPL-2.0 Copyright (c) 2008 by Embedded Alley Solution Inc.
Copyright (c) 2003, Dr Brian Gladman <[email protected]>, Worcester, UK.

Copyright (C)2006 USAGI/WIDE Project

iproute2 3.17.0 GPL-2.0 Copyright (c) 2008, Intel Corporation.
Copyright (C) 2012 Eric Dumazet <[email protected]>

iptables 1.4.21 GPL-2.0

kexec 2.0.9 GPL-2.0

kmod 19 LGPL-2.1 Copyright (c) 1994-2013 Free Software Foundation, Inc.

libdaemon 0.14 LGPL-2.1

Copyright (c) 2008 Daniel Drake <[email protected]>

libusb 1.0.19 LGPL-2.1
Copyright (c) 2000-2003 Johannes Erdfelt <[email protected]>

libwebosckets 1.3-
LGPL-2.1
chrome37-firefox30
 Linux Kernel 3.14.52 GPL-2.0

memtester 4.1.3 GPL-2.0 Copyright (c) 2004-2010 Charles Cazabon <[email protected]>

node-firebird 0.7.2 MPL-2.0

nss-mdns 0.10 LGPL-2.1 Copyright 2004-2007 Lennart Poettering <mzaffzqaf (at) 0pointer (dot) de>

Florian Boor
Copyright (c) 2003 kernel concepts
opkg 0.2.4 GPL-2.0
Carl D. Worth
Copyright (c) 2001 University of Southern California

procps 3.3.10 GPL-2.0

Copyright (c) 1997, 1998 Public Flood Software

proftpd 1.3.5 GPL-2.0 Copyright (c) 1999, 2000 MacGyver aka Habeeb J. Dihu <[email protected]>
Copyright (c) 2001-2011 The ProFTPD Project team

Copyright (c) Ananth Mavinakayanahalli

Copyright (c) Daniel Stekloff
Copyright (c) Mohan Kumar
GPL-2.0 Copyright (c) Nitin Vashisth
sysfsutils 2.1.0
LGPL-2.1 Copyright (c) Ananth Mavinakayanahalli
Copyright (c) Daniel Stekloff
Copyright (c) Mohan Kumar
Copyright (c) Nitin Vashisth

sysstat 11.0.2 GPL-2.0

sysvinit 2.88dsf GPL-2.0 Copyright (c) 1991-2004 Miquel van Smoorenburg

udev 182 GPL-2.0

usbutils 007 GPL-2.0

Util-Linux 2.25.2 GPL-2.0

The source code for the above may be obtained free of charge from LGE at http://opensource.lge.com. LGE will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected]. This offer is valid for a period of three years after our last shipment of
this product. This offer is valid to anyone in receipt of this information.

Please be informed that LG Electronics, Inc. products may contain open source software listed in the tables below.

Open Source License Copyright

angular-virtual-keyboard
MIT Copyright (c) 2015 Daniel Campos
0.4.3

Apache CouchDB AFL-2.0 Copyright (c) 2009-2016 The Apache Software Foundation

async 2.4.1 MIT Copyright (c) 2010-2017, Caolan McMahon

Copyright (c) 2014, Jonathan Ong <[email protected]>

body-parser 1.18.3 MIT Copyright (c) 2014-2015, Douglas Christopher Wilson
<[email protected]>

Copyright (c) 1998-2005 Beman Dawes, David Abrahams.

Boost BSL-1.0
Copyright (c) 2004-2007 Rene Rivera.

bower 1.8.4 MIT Copyright (c) 2013-present, Twitter and other contributors

composable-middleware
MIT Copyright (c) 2013 Randy McLaughlin
0.3.0

Copyright (c) 2014, Jonathan Ong <[email protected]>

compression 1.7.2 MIT Copyright (c) 2014-2015, Douglas Christopher Wilson
<[email protected]>

connect-livereload 0.5.4 MIT Copyright (c) 2013 intesso

Copyright (c) 2010, Sencha Inc.

connect-multiparty 2.1.0 MIT Copyright (c) 2011, TJ Holowaychuk
Copyright (c) 2013, Andrew Kelley

cookie-parser 1.4.3 MIT Copyright (c) 2014 TJ Holowaychuk <[email protected]>

Copyright (c) 2009-2013 Jeff Mott

Crypto-js 3.1.6 MIT
Copyright (c) 2013-2016 Evan Vosberg

curl curl Copyright (c) 1996 - 2008, Daniel Stenberg, <[email protected]>.

dbus 1.8.10 AFL-2.1 Copyright (C) 2003, 2004 Red Hat, Inc.

Copyright (c) 2002-2014 Matt Johnston

dropbear 2014.66 MIT
Portions copyright (c) 2004 Mihnea Stoenescu

ejs 2.6.1 Apache-2.0 Copyright 2112 Matthew Eernisse ([email protected])

 Copyright (c) 2014 Jonathan Ong <[email protected]>
errorhandler 1.5.0 MIT Copyright (c) 2014-2015 Douglas Christopher Wilson
<[email protected]>

ExcelJS 0.2.46 MIT Copyright (c) 2014-2017 Guyon Roche

Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and
expat 2.1.0 MIT Clark Cooper
Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.

Copyright (c) 2009-2014 TJ Holowaychuk <[email protected]>

Copyright (c) 2013-2014 Roman Shtylman <[email protected]>
express 4.16.3 MIT
Copyright (c) 2014-2015 Douglas Christopher Wilson
<[email protected]>

Copyright (c) 2010 Sencha Inc.

Copyright (c) 2011 TJ Holowaychuk <[email protected]>
express-session 1.15.6 MIT
Copyright (c) 2014-2015 Douglas Christopher Wilson
<[email protected]>

Copyright (c) Ian F. Darwin 1986, 1987, 1989, 1990, 1991, 1992, 1994, 1995.
file 5.22 BSD-like License (file) Software written by Ian F. Darwin and others;
maintained 1994- Christos Zoulas.

file-type 4.3.0 MIT Copyright (c) Sindre Sorhus <[email protected]> (sindresorhus.com)

FileSaver.js 1.3.2 MIT Copyright (c) 2016 Eli Grey.

gulp 3.9.1 MIT Copyright (c) 2013-2016 Fractal <[email protected]>

gulp-clean 0.3.2 MIT Copyright (c) Peter Vilja

gulp-clean-css 2.4.0 MIT Copyright (c) 2016 scniro <[email protected]>

gulp-concat 2.6.1 MIT Copyright (c) 2016 Contra

gulp-concat-css 2.3.0 MIT Copyright (c) 2014 Mario Casciaro

gulp-inject 1.5.0 MIT

gulp-inject-string 0.0.2 MIT Copyright (c) 2014 Mike

gulp-live-server 0.0.28 MIT

gulp-ng-config 1.4.0 MIT Copyright (c) 2015 Atticus White

gulp-ng-constant 0.2.0 MIT Copyright (c) 2014 Arturo Guzman

gulp-rename 1.2.2 MIT Copyright 2013 Hector Guillermo Parra Alvarez

gulp-replace 0.5.4 MIT Copyright (c) 2013 Larry Davis

gulp-sass 2.3.2 MIT Copyright (c) 2013 David Manning

gulp-strip-debug 1.1.0 MIT Copyright (c) Sindre Sorhus <[email protected]> (sindresorhus.com)

gulp-uglify 1.5.4 MIT Copyright (c) 2013-2014 Terin Stock <[email protected]>

gulp-util 2.2.20 MIT Copyright (c) 2014 Fractal <[email protected]>

Copyright (c) 1995-2010 International Business Machines Corporation and

icu 54.1 ICU
others

Jansson 2.7 MIT Copyright (c) 2009-2014 Petri Lehtinen <[email protected]>

Copyright (c) 2009-2014 Stuart Knightley, David Duponchel, Franz Buchinger,

JSZIP 2.6.0 MIT
António Afonso

libcap 2.24 BSD-3-Clause Copyright (c) The Regents of the University of California

libedit 20130712-3.1 BSD-3-Clause Copyright (c) 1992, 1993 The Regents of the University of California

Copyright (c) 2007-2012, Google Inc.

libpcre 8.36 BSD-3-Clause Copyright (c) 2009-2014 Zoltan Herczeg
Copyright (c) 1997-2014 University of Cambridge

libtirpc 0.2.5 BSD-3-Clause Copyright (c) Copyright (c) Bull S.A. 2005

libxml2 2.9.2 MIT Copyright (c) 1998-2012 Daniel Veillard.

libxml2 MIT Copyright (C) 1998-2003 Daniel Veillard

list-to-tree 0.0.6 BSD-3-Clause Copyright (c) 2013 Denis Ivanov

lodash 4.17.10 MIT Copyright (c) JS Foundation and other contributors

main-bower-files 2.13.1 MIT Copyright (c) 2013 Christopher Knötschke

Copyright (c) 2014, Jonathan Ong <[email protected]>

method-override 2.3.10 MIT
Copyright (c) 2014, Douglas Christopher Wilson <[email protected]>

minini 1.2 Apache-2.0

 minini 1.2 Apache-2.0

minini Apache-2.0

moment 2.22.1 MIT Copyright (c) JS Foundation and other contributors

Copyright (c) 2014 Jonathan Ong <[email protected]>

morgan 1.9.0 MIT Copyright (c) 2014-2015 Douglas Christopher Wilson
<[email protected]>

my-bubble Apache-2.0 Copyright (c) 2007, Uppsala University

ncurses 5.9 MIT-like License (ncurses) Copyright (c) 1998-2004,2006 Free Software Foundation, Inc.

Copyright (C) 2002-2016 Igor Sysoev

nginx 1.10.3 BSD-2-Clause
Copyright (C) 2011-2016 Nginx, Inc.

node xmldom 0.1.27 MIT

node-mailer 2.7.2 MIT Copyright (c) 2011-2016 Andris Reinman

node-mime 1.6.0 MIT Copyright (c) 2010, Benjamin Thomas, Robert Kieffer

node-mime 1.3.4 MIT Copyright (c) 2010 Benjamin Thomas, Robert Kieffer

node-q 1.5.1 MIT Copyright (c) 2009‒2017, Kristopher Michael Kowal

node-sqlite3 3.1.8 BSD-3-Clause Copyright (c) MapBox

node-unzip-2 0.2.5 MIT Copyright (c) 2012 - 2013 Near Infinity Corporation

node-xml2js 0.4.19 MIT Copyright 2010, 2011, 2012, 2013.

nodemailer-smtp-
MIT Copyright (c) 2014-2016 Andris Reinman
transport 2.7.4

Copyright (c) npm, Inc. and Contributors

npm 2.14.12 Artistic-2.0
Copyright (c) 2000-2006, The Perl Foundation.

ntpdate 4.2.8 NTP

openssl 1.0.2d OpenSSL

Copyright (c) 1998-2017 The OpenSSL Project.

openssl OpenSSL
Copyright (C) 1995-1998 Eric Young ([email protected])

passport 0.3.2 MIT Copyright (c) 2011-2015 Jared Hanson

passport-local 1.0.0 MIT Copyright (c) 2011-2015 Jared Hanson

path 0.12.7 MIT Copyright Joyent, Inc. and other Node contributors

perl 5.20.0 Artistic-1.0-Perl Copyright (C) 1993-2014 by Larry Wall and others.

read-chunk 2.0.0 MIT Copyright (c) Sindre Sorhus <[email protected]> (sindresorhus.com)

rpcbind 0.2.2 BSD-3-Clause Copyright (c) Bull S.A. 2005

Copyright (c) 2010, Sencha Inc.

Copyright (c) 2011, LearnBoost
serve-favicon 2.5.0 MIT
Copyright (c) 2011, TJ Holowaychuk
Copyright (c) 2014-2017, Douglas Christopher Wilson

Copyright (c) 2010 Sencha Inc.

Copyright (c) 2011 LearnBoost
serve-favicon 2.3.1 MIT
Copyright (c) 2011 TJ Holowaychuk
Copyright (c) 2014 Douglas Christopher Wilson

Copyright (c) 2007 - 2009, Nicolas François

Copyright (c) 1989 - 1994, Julianne Frances Haugh
shadow 4.2.1 BSD-3-Clause Copyright (c) 1991 - 1993, Chip Rosenthal
Copyright (c) 1996 - 2000, Marek Michalkiewicz
Copyright (c) 2003 - 2005, Tomasz Kloczko

shelljs 0.6.1 BSD-3-Clause Copyright (c) 2012, Artur Adib <[email protected]>

shelljs 0.4.0 BSD-3-Clause Copyright (c) 2012, Artur Adib <[email protected]>

sudo 1.8.11p2 MIT-like License (sudo)

zlib 1.2.8 Zlib Copyright (c) 1995-2013 Jean-loup Gailly and Mark Adler

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)

AFL-2.0

The Academic Free License

v. 2.0
This Academic Free License (the "License") applies to any original work of authorship (the "Original Work") whose owner (the "Licensor") has placed the following notice immediately following the
copyright notice for the Original Work:

Licensed under the Academic Free License version 2.0

1) Grant of Copyright License. Licensor hereby grants You a world-wide, royalty-free, non-exclusive, perpetual, sublicenseable license to do the following:

a) to reproduce the Original Work in copies;

b) to prepare derivative works ("Derivative Works") based upon the Original Work;
c) to distribute copies of the Original Work and Derivative Works to the public;
d) to perform the Original Work publicly; and
e) to display the Original Work publicly.

2) Grant of Patent License. Licensor hereby grants You a world-wide, royalty-free, non-exclusive, perpetual, sublicenseable license, under patent claims owned or controlled by the Licensor that are
embodied in the Original Work as furnished by the Licensor, to make, use, sell and offer for sale the Original Work and Derivative Works.

3) Grant of Source Code License. The term "Source Code" means the preferred form of the Original Work for making modifications to it and all available documentation describing how to modify
the Original Work. Licensor hereby agrees to provide a machine-readable copy of the Source Code of the Original Work along with each copy of the Original Work that Licensor distributes. Licensor
reserves the right to satisfy this obligation by placing a machine-readable copy of the Source Code in an information repository reasonably calculated to permit inexpensive and convenient access
by You for as long as Licensor continues to distribute the Original Work, and by publishing the address of that information repository in a notice immediately following the copyright notice that
applies to the Original Work.

4) Exclusions From License Grant. Neither the names of Licensor, nor the names of any contributors to the Original Work, nor any of their trademarks or service marks, may be used to endorse or
promote products derived from this Original Work without express prior written permission of the Licensor. Nothing in this License shall be deemed to grant any rights to trademarks, copyrights,
patents, trade secrets or any other intellectual property of Licensor except as expressly stated herein. No patent license is granted to make, use, sell or offer to sell embodiments of any patent
claims other than the licensed claims defined in Section 2. No right is granted to the trademarks of Licensor even if such marks are included in the Original Work. Nothing in this License shall be
interpreted to prohibit Licensor from licensing under different terms from this License any Original Work that Licensor otherwise would have a right to license.

5) This section intentionally omitted.

6) Attribution Rights. You must retain, in the Source Code of any Derivative Works that You create, all copyright, patent or trademark notices from the Source Code of the Original Work, as well as
any notices of licensing and any descriptive text identified therein as an "Attribution Notice." You must cause the Source Code for any Derivative Works that You create to carry a prominent
Attribution Notice reasonably calculated to inform recipients that You have modified the Original Work.

7) Warranty of Provenance and Disclaimer of Warranty. Licensor warrants that the copyright in and to the Original Work and the patent rights granted herein by Licensor are owned by the Licensor
or are sublicensed to You under the terms of this License with the permission of the contributor(s) of those copyrights and patent rights. Except as expressly stated in the immediately proceeding
sentence, the Original Work is provided under this License on an "AS IS" BASIS and WITHOUT WARRANTY, either express or implied, including, without limitation, the warranties of NON-
INFRINGEMENT, MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY OF THE ORIGINAL WORK IS WITH YOU. This DISCLAIMER OF WARRANTY
constitutes an essential part of this License. No license to Original Work is granted hereunder except under this disclaimer.

8) Limitation of Liability. Under no circumstances and under no legal theory, whether in tort (including negligence), contract, or otherwise, shall the Licensor be liable to any person for any direct,
indirect, special, incidental, or consequential damages of any character arising as a result of this License or the use of the Original Work including, without limitation, damages for loss of goodwill,
work stoppage, computer failure or malfunction, or any and all other commercial damages or losses. This limitation of liability shall not apply to liability for death or personal injury resulting from
Licensor's negligence to the extent applicable law prohibits such limitation. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion and
limitation may not apply to You.

9) Acceptance and Termination. If You distribute copies of the Original Work or a Derivative Work, You must make a reasonable effort under the circumstances to obtain the express assent of
recipients to the terms of this License. Nothing else but this License (or another written agreement between Licensor and You) grants You permission to create Derivative Works based upon the
Original Work or to exercise any of the rights granted in Section 1 herein, and any attempt to do so except under the terms of this License (or another written agreement between Licensor and You)
is expressly prohibited by U.S. copyright law, the equivalent laws of other countries, and by international treaty. Therefore, by exercising any of the rights granted to You in Section 1 herein, You
indicate Your acceptance of this License and all of its terms and conditions.

10) Termination for Patent Action. This License shall terminate automatically and You may no longer exercise any of the rights granted to You by this License as of the date You commence an action,
including a cross-claim or counterclaim, for patent infringement (i) against Licensor with respect to a patent applicable to software or (ii) against any entity with respect to a patent applicable to the
Original Work (but excluding combinations of the Original Work with other software or hardware).

11) Jurisdiction, Venue and Governing Law. Any action or suit relating to this License may be brought only in the courts of a jurisdiction wherein the Licensor resides or in which Licensor conducts
its primary business, and under the laws of that jurisdiction excluding its conflict-of-law provisions. The application of the United Nations Convention on Contracts for the International Sale of
Goods is expressly excluded. Any use of the Original Work outside the scope of this License or after its termination shall be subject to the requirements and penalties of the U.S. Copyright Act, 17
U.S.C. ¤ 101 et seq., the equivalent laws of other countries, and international treaty. This section shall survive the termination of this License.

12) Attorneys Fees. In any action to enforce the terms of this License or seeking damages relating thereto, the prevailing party shall be entitled to recover its costs and expenses, including, without
limitation, reasonable attorneys' fees and costs incurred in connection with such action, including any appeal of such action. This section shall survive the termination of this License.

13) Miscellaneous. This License represents the complete agreement concerning the subject matter hereof. If any provision of this License is held to be unenforceable, such provision shall be
reformed only to the extent necessary to make it enforceable.

14) Definition of "You" in This License. "You" throughout this License, whether in upper or lower case, means an individual or a legal entity exercising rights under, and complying with all of the
terms of, this License. For legal entities, "You" includes any entity that controls, is controlled by, or is under common control with you. For purposes of this definition, "control" means (i) the power,
direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial
ownership of such entity.

15) Right to Use. You may use the Original Work in all ways not otherwise restricted or conditioned by this License or by law, and Licensor promises not to interfere with or be responsible for such
uses by You.

This license is Copyright (C) 2003 Lawrence E. Rosen. All rights reserved.
Permission is hereby granted to copy and distribute this license without modification. This license may not be modified without the express written permission of its copyright owner.

AFL-2.1

The Academic Free License

v.2.1

This Academic Free License (the "License") applies to any original work of authorship (the "Original Work") whose owner (the "Licensor") has placed the following notice immediately following the
copyright notice for the Original Work:
Licensed under the Academic Free License version 2.1

1) Grant of Copyright License. Licensor hereby grants You a world-wide, royalty-free, non-exclusive, perpetual, sublicenseable license to do the following:

a) to reproduce the Original Work in copies;

b) to prepare derivative works ("Derivative Works") based upon the Original Work;
c) to distribute copies of the Original Work and Derivative Works to the public;
d) to perform the Original Work publicly; and
e) to display the Original Work publicly.

2) Grant of Patent License. Licensor hereby grants You a world-wide, royalty-free, non-exclusive, perpetual, sublicenseable license, under patent claims owned or controlled by the Licensor that are
embodied in the Original Work as furnished by the Licensor, to make, use, sell and offer for sale the Original Work and Derivative Works.

3) Grant of Source Code License. The term "Source Code" means the preferred form of the Original Work for making modifications to it and all available documentation describing how to modify
the Original Work. Licensor hereby agrees to provide a machine-readable copy of the Source Code of the Original Work along with each copy of the Original Work that Licensor distributes. Licensor
reserves the right to satisfy this obligation by placing a machine-readable copy of the Source Code in an information repository reasonably calculated to permit inexpensive and convenient access
by You for as long as Licensor continues to distribute the Original Work, and by publishing the address of that information repository in a notice immediately following the copyright notice that
applies to the Original Work.

4) Exclusions From License Grant. Neither the names of Licensor, nor the names of any contributors to the Original Work, nor any of their trademarks or service marks, may be used to endorse or
promote products derived from this Original Work without express prior written permission of the Licensor. Nothing in this License shall be deemed to grant any rights to trademarks, copyrights,
patents, trade secrets or any other intellectual property of Licensor except as expressly stated herein. No patent license is granted to make, use, sell or offer to sell embodiments of any patent
claims other than the licensed claims defined in Section 2. No right is granted to the trademarks of Licensor even if such marks are included in the Original Work. Nothing in this License shall be
interpreted to prohibit Licensor from licensing under different terms from this License any Original Work that Licensor otherwise would have a right to license.

5) This section intentionally omitted.

6) Attribution Rights. You must retain, in the Source Code of any Derivative Works that You create, all copyright, patent or trademark notices from the Source Code of the Original Work, as well as
any notices of licensing and any descriptive text identified therein as an "Attribution Notice." You must cause the Source Code for any Derivative Works that You create to carry a prominent
Attribution Notice reasonably calculated to inform recipients that You have modified the Original Work.

7) Warranty of Provenance and Disclaimer of Warranty. Licensor warrants that the copyright in and to the Original Work and the patent rights granted herein by Licensor are owned by the Licensor
or are sublicensed to You under the terms of this License with the permission of the contributor(s) of those copyrights and patent rights. Except as expressly stated in the immediately proceeding
sentence, the Original Work is provided under this License on an "AS IS" BASIS and WITHOUT WARRANTY, either express or implied, including, without limitation, the warranties of NON-
INFRINGEMENT, MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY OF THE ORIGINAL WORK IS WITH YOU. This DISCLAIMER OF WARRANTY
constitutes an essential part of this License. No license to Original Work is granted hereunder except under this disclaimer.

8) Limitation of Liability. Under no circumstances and under no legal theory, whether in tort (including negligence), contract, or otherwise, shall the Licensor be liable to any person for any direct,
indirect, special, incidental, or consequential damages of any character arising as a result of this License or the use of the Original Work including, without limitation, damages for loss of goodwill,
work stoppage, computer failure or malfunction, or any and all other commercial damages or losses. This limitation of liability shall not apply to liability for death or personal injury resulting from
Licensor's negligence to the extent applicable law prohibits such limitation. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion and
limitation may not apply to You.

9) Acceptance and Termination. If You distribute copies of the Original Work or a Derivative Work, You must make a reasonable effort under the circumstances to obtain the express assent of
recipients to the terms of this License. Nothing else but this License (or another written agreement between Licensor and You) grants You permission to create Derivative Works based upon the
Original Work or to exercise any of the rights granted in Section 1 herein, and any attempt to do so except under the terms of this License (or another written agreement between Licensor and You)
is expressly prohibited by U.S. copyright law, the equivalent laws of other countries, and by international treaty. Therefore, by exercising any of the rights granted to You in Section 1 herein, You
indicate Your acceptance of this License and all of its terms and conditions.

10) Termination for Patent Action. This License shall terminate automatically and You may no longer exercise any of the rights granted to You by this License as of the date You commence an action,
including a cross-claim or counterclaim, against Licensor or any licensee alleging that the Original Work infringes a patent. This termination provision shall not apply for an action alleging patent
infringement by combinations of the Original Work with other software or hardware.

11) Jurisdiction, Venue and Governing Law. Any action or suit relating to this License may be brought only in the courts of a jurisdiction wherein the Licensor resides or in which Licensor conducts
its primary business, and under the laws of that jurisdiction excluding its conflict-of-law provisions. The application of the United Nations Convention on Contracts for the International Sale of
Goods is expressly excluded. Any use of the Original Work outside the scope of this License or after its termination shall be subject to the requirements and penalties of the U.S. Copyright Act, 17
U.S.C. § 101 et seq., the equivalent laws of other countries, and international treaty. This section shall survive the termination of this License.

12) Attorneys Fees. In any action to enforce the terms of this License or seeking damages relating thereto, the prevailing party shall be entitled to recover its costs and expenses, including, without
limitation, reasonable attorneys' fees and costs incurred in connection with such action, including any appeal of such action. This section shall survive the termination of this License.

13) Miscellaneous. This License represents the complete agreement concerning the subject matter hereof. If any provision of this License is held to be unenforceable, such provision shall be
reformed only to the extent necessary to make it enforceable.

14) Definition of "You" in This License. "You" throughout this License, whether in upper or lower case, means an individual or a legal entity exercising rights under, and complying with all of the
terms of, this License. For legal entities, "You" includes any entity that controls, is controlled by, or is under common control with you. For purposes of this definition, "control" means (i) the power,
direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial
ownership of such entity.

15) Right to Use. You may use the Original Work in all ways not otherwise restricted or conditioned by this License or by law, and Licensor promises not to interfere with or be responsible for such
uses by You.

This license is Copyright (C) 2003-2004 Lawrence E. Rosen. All rights reserved.
Permission is hereby granted to copy and distribute this license without modification. This license may not be modified without the express written permission of its copyright owner.

Apache-2.0

Apache License
Version 2.0, January 2004
http://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

1. Definitions.

"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.
"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.

"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.

"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition,
"control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the
outstanding shares, or (iii) beneficial ownership of such entity.

"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.

"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.

"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and
conversions to other media types.

"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an
example is provided in the Appendix below).

"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other
modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by
name) to the interfaces of, the Work and Derivative Works thereof.

"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally
submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition,
"submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists,
source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that
is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."

"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.

2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable
copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.

3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable
(except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable
by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You
institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or
contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.

4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You
meet the following conditions:

(a) You must give any other recipients of the Work or Derivative Works a copy of this License; and

(b) You must cause any modified files to carry prominent notices stating that You changed the files; and

(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those
notices that do not pertain to any part of the Derivative Works; and

(d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such
NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative
Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices
normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You
distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.

You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications,
or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.

5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and
conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may
have executed with Licensor regarding such Contributions.

6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in
describing the origin of the Work and reproducing the content of the NOTICE file.

7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT
WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR
A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions
under this License.

8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly
negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a
result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other
commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.

9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or
other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of
any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your
accepting any such warranty or additional liability.

END OF TERMS AND CONDITIONS

APPENDIX: How to apply the Apache License to your work.

To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the
brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same
"printed page" as the copyright notice for easier identification within third-party archives.

Copyright [yyyy] [name of copyright owner]

Licensed under the Apache License, Version 2.0 (the "License");

you may not use this file except in compliance with the License.
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software

distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.

Artistic-1.0-Perl

The "Artistic License"

Preamble

The intent of this document is to state the conditions under which a Package may be copied, such that the Copyright Holder maintains some semblance of artistic control over the development of
the package, while giving the users of the package the right to use and distribute the Package in a more-or-less customary fashion, plus the right to make reasonable modifications.

Definitions:

"Package" refers to the collection of files distributed by the Copyright Holder, and derivatives of that collection of files created through textual modification.

"Standard Version" refers to such a Package if it has not been modified, or has been modified in accordance with the wishes of the Copyright Holder as specified below.

"Copyright Holder" is whoever is named in the copyright or copyrights for the package.

"You" is you, if you're thinking about copying or distributing this Package.

"Reasonable copying fee" is whatever you can justify on the basis of media cost, duplication charges, time of people involved, and so on. (You will not be required to justify it to the Copyright
Holder, but only to the computing community at large as a market that must bear the fee.)

"Freely Available" means that no fee is charged for the item itself, though there may be fees involved in handling the item. It also means that recipients of the item may redistribute it under the
same conditions they received it.

1. You may make and give away verbatim copies of the source form of the Standard Version of this Package without restriction, provided that you duplicate all of the original copyright notices and
associated disclaimers.

2. You may apply bug fixes, portability fixes and other modifications derived from the Public Domain or from the Copyright Holder. A Package modified in such a way shall still be considered the
Standard Version.

3. You may otherwise modify your copy of this Package in any way, provided that you insert a prominent notice in each changed file stating how and when you changed that file, and provided that
you do at least ONE of the following:

a) place your modifications in the Public Domain or otherwise make them Freely Available, such as by posting said modifications to Usenet or an equivalent medium, or placing the modifications on
a major archive site such as uunet.uu.net, or by allowing the Copyright Holder to include your modifications in the Standard Version of the Package.
b) use the modified Package only within your corporation or organization.
c) rename any non-standard executables so the names do not conflict with standard executables, which must also be provided, and provide a separate manual page for each non-standard
executable that clearly documents how it differs from the Standard Version.
d) make other distribution arrangements with the Copyright Holder.

4. You may distribute the programs of this Package in object code or executable form, provided that you do at least ONE of the following:

a) distribute a Standard Version of the executables and library files, together with instructions (in the manual page or equivalent) on where to get the Standard Version.
b) accompany the distribution with the machine-readable source of the Package with your modifications.
c) give non-standard executables non-standard names, and clearly document the differences in manual pages (or equivalent), together with instructions on where to get the Standard Version.
d) make other distribution arrangements with the Copyright Holder.

5. You may charge a reasonable copying fee for any distribution of this Package. You may charge any fee you choose for support of this Package. You may not charge a fee for this Package itself.
However, you may distribute this Package in aggregate with other (possibly commercial) programs as part of a larger (possibly commercial) software distribution provided that you do not advertise
this Package as a product of your own. You may embed this Package's interpreter within an executable of yours (by linking); this shall be construed as a mere form of aggregation, provided that the
complete Standard Version of the interpreter is so embedded.

6. The scripts and library files supplied as input to or produced as output from the programs of this Package do not automatically fall under the copyright of this Package, but belong to whoever
generated them, and may be sold commercially, and may be aggregated with this Package. If such scripts or library files are aggregated with this Package via the so-called "undump" or "unexec"
methods of producing a binary executable image, then distribution of such an image shall neither be construed as a distribution of this Package nor shall it fall under the restrictions of Paragraphs 3
and 4, provided that you do not represent such an executable image as a Standard Version of this Package.

7. C subroutines (or comparably compiled subroutines in other languages) supplied by you and linked into this Package in order to emulate subroutines and variables of the language defined by
this Package shall not be considered part of this Package, but are the equivalent of input as in Paragraph 6, provided these subroutines do not change the language in any way that would cause it to
fail the regression tests for the language.

8. Aggregation of this Package with a commercial distribution is always permitted provided that the use of this Package is embedded; that is, when no overt attempt is made to make this Package's
interfaces visible to the end user of the commercial distribution. Such use shall not be construed as a distribution of this Package.

9. The name of the Copyright Holder may not be used to endorse or promote products derived from this software without specific prior written permission.

10. THIS PACKAGE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS
FOR A PARTICULAR PURPOSE.

The End

Artistic-2.0
Artistic-2.0

The Artistic License 2.0

Copyright (c) 2000-2006, The Perl Foundation.

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble

This license establishes the terms under which a given free software Package may be copied, modified, distributed, and/or redistributed. The intent is that the Copyright Holder maintains some
artistic control over the development of that Package while still keeping the Package available as open source and free software.

You are always permitted to make arrangements wholly outside of this license directly with the Copyright Holder of a given Package. If the terms of this license do not permit the full use that you
propose to make of the Package, you should contact the Copyright Holder and seek a different licensing arrangement.

Definitions

"Copyright Holder" means the individual(s) or organization(s) named in the copyright notice for the entire Package.

"Contributor" means any party that has contributed code or other material to the Package, in accordance with the Copyright Holder's procedures.

"You" and "your" means any person who would like to copy, distribute, or modify the Package.

"Package" means the collection of files distributed by the Copyright Holder, and derivatives of that collection and/or of those files. A given Package may consist of either the Standard Version, or a
Modified Version.

"Distribute" means providing a copy of the Package or making it accessible to anyone else, or in the case of a company or organization, to others outside of your company or organization.

"Distributor Fee" means any fee that you charge for Distributing this Package or providing support for this Package to another party. It does not mean licensing fees.

"Standard Version" refers to the Package if it has not been modified, or has been modified only in ways explicitly requested by the Copyright Holder.

"Modified Version" means the Package, if it has been changed, and such changes were not explicitly requested by the Copyright Holder.

"Original License" means this Artistic License as Distributed with the Standard Version of the Package, in its current version or as it may be modified by The Perl Foundation in the future.

"Source" form means the source code, documentation source, and configuration files for the Package.

"Compiled" form means the compiled bytecode, object code, binary, or any other form resulting from mechanical transformation or translation of the Source form.

Permission for Use and Modification Without Distribution

(1) You are permitted to use the Standard Version and create and use Modified Versions for any purpose without restriction, provided that you do not Distribute the Modified Version.

Permissions for Redistribution of the Standard Version

(2) You may Distribute verbatim copies of the Source form of the Standard Version of this Package in any medium without restriction, either gratis or for a Distributor Fee, provided that you
duplicate all of the original copyright notices and associated disclaimers. At your discretion, such verbatim copies may or may not include a Compiled form of the Package.

(3) You may apply any bug fixes, portability changes, and other modifications made available from the Copyright Holder. The resulting Package will still be considered the Standard Version, and as
such will be subject to the Original License.

Distribution of Modified Versions of the Package as Source

(4) You may Distribute your Modified Version as Source (either gratis or for a Distributor Fee, and with or without a Compiled form of the Modified Version) provided that you clearly document how it
differs from the Standard Version, including, but not limited to, documenting any non-standard features, executables, or modules, and provided that you do at least ONE of the following:

(a) make the Modified Version available to the Copyright Holder of the Standard Version, under the Original License, so that the Copyright Holder may include your modifications in the Standard
Version.
(b) ensure that installation of your Modified Version does not prevent the user installing or running the Standard Version. In addition, the Modified Version must bear a name that is different from
the name of the Standard Version.
(c) allow anyone who receives a copy of the Modified Version to make the Source form of the Modified Version available to others under

(i) the Original License or

(ii) a license that permits the licensee to freely copy, modify and redistribute the Modified Version using the same licensing terms that apply to the copy that the licensee received, and requires that
the Source form of the Modified Version, and of any works derived from it, be made freely available in that license fees are prohibited but Distributor Fees are allowed.

Distribution of Compiled Forms of the Standard Version or Modified Versions without the Source

(5) You may Distribute Compiled forms of the Standard Version without the Source, provided that you include complete instructions on how to get the Source of the Standard Version. Such
instructions must be valid at the time of your distribution. If these instructions, at any time while you are carrying out such distribution, become invalid, you must provide new instructions on
demand or cease further distribution. If you provide valid instructions or cease distribution within thirty days after you become aware that the instructions are invalid, then you do not forfeit any of
your rights under this license.

(6) You may Distribute a Modified Version in Compiled form without the Source, provided that you comply with Section 4 with respect to the Source of the Modified Version.

Aggregating or Linking the Package

(7) You may aggregate the Package (either the Standard Version or Modified Version) with other packages and Distribute the resulting aggregation provided that you do not charge a licensing fee for
the Package. Distributor Fees are permitted, and licensing fees for other components in the aggregation are permitted. The terms of this license apply to the use and Distribution of the Standard or
Modified Versions as included in the aggregation.

(8) You are permitted to link Modified and Standard Versions with other works, to embed the Package in a larger work of your own, or to build stand-alone binary or bytecode versions of
applications that include the Package, and Distribute the result without restriction, provided the result does not expose a direct interface to the Package.

Items That are Not Considered Part of a Modified Version

(9) Works (including, but not limited to, modules and scripts) that merely extend or make use of the Package, do not, by themselves, cause the Package to be a Modified Version. In addition, such
works are not considered parts of the Package itself, and are not subject to the terms of this license.
works are not considered parts of the Package itself, and are not subject to the terms of this license.

General Provisions

(10) Any use, modification, and distribution of the Standard or Modified Versions is governed by this Artistic License. By using, modifying or distributing the Package, you accept this license. Do not
use, modify, or distribute the Package, if you do not accept this license.

(11) If your Modified Version has been derived from a Modified Version made by someone other than you, you are nevertheless required to ensure that your Modified Version complies with the
requirements of this license.

(12) This license does not grant you the right to use any trademark, service mark, tradename, or logo of the Copyright Holder.

(13) This license includes the non-exclusive, worldwide, free-of-charge patent license to make, have made, use, offer to sell, sell, import and otherwise transfer the Package with respect to any
patent claims licensable by the Copyright Holder that are necessarily infringed by the Package. If you institute patent litigation (including a cross-claim or counterclaim) against any party alleging
that the Package constitutes direct or contributory patent infringement, then this Artistic License to you shall terminate on the date that such litigation is filed.

(14) Disclaimer of Warranty:

THE PACKAGE IS PROVIDED BY THE COPYRIGHT HOLDER AND CONTRIBUTORS "AS IS' AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES. THE IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT ARE DISCLAIMED TO THE EXTENT PERMITTED BY YOUR LOCAL LAW. UNLESS REQUIRED BY LAW, NO COPYRIGHT HOLDER OR
CONTRIBUTOR WILL BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING IN ANY WAY OUT OF THE USE OF THE PACKAGE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.

BSD-2-Clause

Copyright (c) <year> <owner> All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the
distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

BSD-3-Clause

Copyright (c) <year> <owner>. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the
distribution.

3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

BSD-like License (file)

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice immediately at the beginning of the file, without modification,
this list of conditions, and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.

BSL-1.0

Boost Software License - Version 1.0 - August 17th, 2003

Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the software and accompanying documentation covered by this license (the "Software") to use,
reproduce, display, distribute, execute, and transmit the Software, and to prepare derivative works of the Software, and to permit third-parties to whom the Software is furnished to do so, all
subject to the following:

The copyright notices in the Software and this entire statement, including the above license grant, this restriction and the following disclaimer, must be included in all copies of the Software, in
whole or in part, and all derivative works of the Software, unless such copies or derivative works are solely in the form of machine-executable object code generated by a source language processor.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR OTHER
LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

GPL-2.0

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

Copyright (C) 1989, 1991 Free Software Foundation, Inc.

51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and
change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose
authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and
charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do
these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if
you distribute copies of the software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.

Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and
passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.

The precise terms and conditions for copying, distribution and modification follow.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The
"Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing
the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".)
Each licensee is addressed as "you".

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the
Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program
does.

1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy
of this License along with the Program.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of
Section 1 above, provided that you also meet all of these conditions:

a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.

c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the
these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the
Program is not required to print an announcement.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate
works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole
which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and
every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or
collective works based on the Program.

In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring
the other work under the scope of this License.

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of
the following:

a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software
interchange; or,

b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-
readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received
the program in object code or executable form with such an offer, in accord with Subsection b above.)

The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains,
plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not
include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless
that component itself accompanies the executable.

If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not compelled to copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so
long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions
are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do
so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program
subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third
parties to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order,
agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free
redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from
distribution of the Program.

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in
other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee
cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this
License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License
incorporates the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may
differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms
and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any
version ever published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted
by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all
derivatives of our free software and of promoting the sharing and reuse of software generally.

NO WARRANTY

11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN
WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM
AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs

If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change
under these terms.

To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

one line to give the program's name and an idea of what it does. Copyright (C) yyyy name of author

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-
1301, USA. Also add information on how to contact you by electronic and paper mail.

If the program is interactive, make it output a short notice like this when it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to
redistribute it under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show
w' and `show c'; they could even be mouse-clicks or menu items--whatever suits your program.

You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker.

signature of Ty Coon, 1 April 1989 Ty Coon, President of Vice

ICU

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so,
provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the above copyright notice(s) and this permission notice appear in
supporting documentation.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY
SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written
authorization of the copyright holder.

LGPL-2.1

GNU LESSER GENERAL PUBLIC LICENSE

Version 2.1, February 1999

Copyright (C) 1991, 1999 Free Software Foundation, Inc.

51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.

[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.]

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and
change free software--to make sure the software is free for all its users.

This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it.
You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the
explanations below.

When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software
(and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are
informed that you can do these things.

To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for
you if you distribute copies of the library or if you modify it.

For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the
source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and
recompiling it. And you must show them these terms so they know their rights.

We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library.

To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that
what they have is not the original version, so that the original author's reputation will not be affected by problems that might be introduced by others.

Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a
restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license.

Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and
is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs.

When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary
General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with
the library.

We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers
Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides
advantages in certain special circumstances.

For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs
must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free
software only, so we use the Lesser General Public License.

In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library
in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.

Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to
run that program using a modified version of the Library.

The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library".
The former contains code derived from the library, whereas the latter must be combined with the library in order to run.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the
terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you".

A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form
executables.

The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under
copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter,
translation is included without limitation in the term "modification".)

"Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to control compilation and installation of the library.

Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output
from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the
Library does and what the program that uses the Library does.

1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the
Library.

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:

a) The modified work must itself be a software library.

b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.

c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.

d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is
invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its
purpose remains meaningful.

(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-
supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works
in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a
work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part
regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or
collective works based on the Library.

In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the
other work under the scope of this License.

3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License,
so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then
you can specify that version instead if you wish.) Do not make any other change in these notices.

Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy.

This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you
accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software
interchange.

If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to
distribute the source code, even though third parties are not compelled to copy the source along with the object code.

5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a
work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.

However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses
the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables.

When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is
not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law.

If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is
unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.)

Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6,
whether or not they are linked directly with the Library itself.

6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work
under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications.

You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the
work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you
must do one of these things:

a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under
Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the
user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the
Library will not necessarily be able to recompile the application to use the modified definitions.)

b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user's computer system,
rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-
compatible with the version that the work was made with.

c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this
distribution.

d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.

e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.

For an executable, the required form of the "work that uses the Library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception,
the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating
system on which the executable runs, unless that component itself accompanies the executable.

It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot
use both them and the Library together in an executable that you distribute.

7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined
library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things:

a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above.

b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work.

8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or
distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their
licenses terminated so long as such parties remain in full compliance.

9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying the Library or works based on it.

10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the
Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance
by third parties with this License.

11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order,
agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free
redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from
distribution of the Library.

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in
other circumstances.

It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee
cannot impose that choice.

This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License
may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License
incorporates the limitation as if written in the body of this License.
incorporates the limitation as if written in the body of this License.

13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version,
but may differ in detail to address new problems or concerns.

Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms
and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever
published by the Free Software Foundation.

14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is
copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free
status of all derivatives of our free software and of promoting the sharing and reuse of software generally.

NO WARRANTY

15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN
WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE
LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY
AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE
WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Libraries

If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by
permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).

To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should
have at least the "copyright" line and a pointer to where the full notice is found.

one line to give the library's name and an idea of what it does.
Copyright (C) year name of author

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the
License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-
1301 USA Also add information on how to contact you by electronic and paper mail.

You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in

the library `Frob' (a library for tweaking knobs) written
by James Random Hacker.

signature of Ty Coon, 1 April 1990

Ty Coon, President of Vice
That's all there is to it!

MIT

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do
so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

MIT-like License (ncurses)

Copyright (c) 1999-2004,2005 Free Software Foundation, Inc.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify, merge, publish, distribute, distribute with modifications, sublicense, and/or sell copies of the Software, and to permit persons to whom
the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name(s) of the above copyright holders shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior
written authorization.

MIT-like License (sudo)

Sudo is distributed under the following license:

Copyright (c) 1994-1996, 1998-2013

Todd C. Miller <[email protected]>

Permission to use, copy, modify, and distribute this software for any
purpose with or without fee is hereby granted, provided that the above
copyright notice and this permission notice appear in all copies.

THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Sponsored in part by the Defense Advanced Research Projects

Agency (DARPA) and Air Force Research Laboratory, Air Force
Materiel Command, USAF, under agreement number F39502-99-1-0512.

The file redblack.c bears the following license:

Copyright (c) 2001 Emin Martinian

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that neither the name of Emin
Martinian nor the names of any contributors are be used to endorse or
promote products derived from this software without specific prior
written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The files getcwd.c, glob.c, glob.h and snprintf.c bear the following license:

Copyright (c) 1989, 1990, 1991, 1993

The Regents of the University of California. All rights reserved.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the University nor the names of its contributors
may be used to endorse or promote products derived from this software
without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.

The file fnmatch.c bears the following license:

Copyright (c) 2011, VMware, Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
* Neither the name of the VMware, Inc. nor the names of its contributors
may be used to endorse or promote products derived from this software
without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL VMWARE, INC. OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The embedded copy of zlib bears the following license:

Copyright (C) 1995-2012 Jean-loup Gailly and Mark Adler

This software is provided 'as-is', without any express or implied

warranty. In no event will the authors be held liable for any damages
arising from the use of this software.

Permission is granted to anyone to use this software for any purpose,

including commercial applications, and to alter it and redistribute it
freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not
claim that you wrote the original software. If you use this software
in a product, an acknowledgment in the product documentation would be
appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.

Jean-loup Gailly Mark Adler

[email protected] [email protected]

MPL-1.1

Mozilla Public License Version 1.1

1. Definitions.

1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party.

1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications.

1.2. "Contributor Version" means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor.

1.3. "Covered Code" means the Original Code or Modifications or the combination of the Original Code and Modifications, in each case including portions thereof.

1.4. "Electronic Distribution Mechanism" means a mechanism generally accepted in the software development community for the electronic transfer of data.

1.5. "Executable" means Covered Code in any form other than Source Code.

1.6. "Initial Developer" means the individual or entity identified as the Initial Developer in the Source Code notice required by Exhibit A.

1.7. "Larger Work" means a work which combines Covered Code or portions thereof with code not governed by the terms of this License.

1.8. "License" means this document.

1.8.1. "Licensable" means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequently acquired, any and all of the rights conveyed herein.

1.9. "Modifications" means any addition to or deletion from the substance or structure of either the Original Code or any previous Modifications. When Covered Code is released as a series of files, a
Modification is:
Any addition to or deletion from the contents of a file containing Original Code or previous Modifications.
Any new file that contains any part of the Original Code or previous Modifications.

1.10. "Original Code" means Source Code of computer software code which is described in the Source Code notice required by Exhibit A as Original Code, and which, at the time of its release under
this License is not already Covered Code governed by this License.

1.10.1. "Patent Claims" means any patent claim(s), now owned or hereafter acquired, including without limitation, method, process, and apparatus claims, in any patent Licensable by grantor.

1.11. "Source Code" means the preferred form of the Covered Code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to
control compilation and installation of an Executable, or source code differential comparisons against either the Original Code or another well known, available Covered Code of the Contributor's
choice. The Source Code can be in a compressed or archival form, provided the appropriate decompression or de-archiving software is widely available for no charge.

1.12. "You" (or "Your") means an individual or a legal entity exercising rights under, and complying with all of the terms of, this License or a future version of this License issued under Section 6.1.
For legal entities, "You" includes any entity which controls, is controlled by, or is under common control with You. For purposes of this definition, "control" means (a) the power, direct or indirect, to
cause the direction or management of such entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of the outstanding shares or beneficial ownership of such
entity.
2. Source Code License.

2.1. The Initial Developer Grant. The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party intellectual property claims:

a. under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use, reproduce, modify, display, perform, sublicense and distribute the Original Code (or
portions thereof) with or without Modifications, and/or as part of a Larger Work; and
b. under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or
portions thereof).
c. the licenses granted in this Section 2.1 (a) and (b) are effective on the date Initial Developer first distributes Original Code under the terms of this License.
d. Notwithstanding Section 2.1 (b) above, no patent license is granted: 1) for code that You delete from the Original Code; 2) separate from the Original Code; or 3) for infringements caused by: i) the
modification of the Original Code or ii) the combination of the Original Code with other software or devices.

2.2. Contributor Grant. Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-free, non-exclusive license

a. under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use, reproduce, modify, display, perform, sublicense and distribute the Modifications created by
such Contributor (or portions thereof) either on an unmodified basis, with other Modifications, as Covered Code and/or as part of a Larger Work; and
b. under Patent Claims infringed by the making, using, or selling of Modifications made by that Contributor either alone and/or in combination with its Contributor Version (or portions of such
combination), to make, use, sell, offer for sale, have made, and/or otherwise dispose of: 1) Modifications made by that Contributor (or portions thereof); and 2) the combination of Modifications
made by that Contributor with its Contributor Version (or portions of such combination).
c. the licenses granted in Sections 2.2 (a) and 2.2 (b) are effective on the date Contributor first makes Commercial Use of the Covered Code.
d. Notwithstanding Section 2.2 (b) above, no patent license is granted: 1) for any code that Contributor has deleted from the Contributor Version; 2) separate from the Contributor Version; 3) for
infringements caused by: i) third party modifications of Contributor Version or ii) the combination of Modifications made by that Contributor with other software (except as part of the Contributor
Version) or other devices; or 4) under Patent Claims infringed by Covered Code in the absence of Modifications made by that Contributor.

3. Distribution Obligations.

3.1. Application of License. The Modifications which You create or to which You contribute are governed by the terms of this License, including without limitation Section 2.2. The Source Code
version of Covered Code may be distributed only under the terms of this License or a future version of this License released under Section 6.1, and You must include a copy of this License with every
copy of the Source Code You distribute. You may not offer or impose any terms on any Source Code version that alters or restricts the applicable version of this License or the recipients' rights
hereunder. However, You may include an additional document offering the additional rights described in Section 3.5.

3.2. Availability of Source Code. Any Modification which You create or to which You contribute must be made available in Source Code form under the terms of this License either on the same media
as an Executable version or via an accepted Electronic Distribution Mechanism to anyone to whom you made an Executable version available; and if made available via Electronic Distribution
Mechanism, must remain available for at least twelve (12) months after the date it initially became available, or at least six (6) months after a subsequent version of that particular Modification has
been made available to such recipients. You are responsible for ensuring that the Source Code version remains available even if the Electronic Distribution Mechanism is maintained by a third party.

3.3. Description of Modifications. You must cause all Covered Code to which You contribute to contain a file documenting the changes You made to create that Covered Code and the date of any
change. You must include a prominent statement that the Modification is derived, directly or indirectly, from Original Code provided by the Initial Developer and including the name of the Initial
Developer in (a) the Source Code, and (b) in any notice in an Executable version or related documentation in which You describe the origin or ownership of the Covered Code.

3.4. Intellectual Property Matters

(a) Third Party Claims

If Contributor has knowledge that a license under a third party's intellectual property rights is required to exercise the rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must
include a text file with the Source Code distribution titled "LEGAL" which describes the claim and the party making the claim in sufficient detail that a recipient will know whom to contact. If
Contributor obtains such knowledge after the Modification is made available as described in Section 3.2, Contributor shall promptly modify the LEGAL file in all copies Contributor makes available
thereafter and shall take other steps (such as notifying appropriate mailing lists or newsgroups) reasonably calculated to inform those who received the Covered Code that new knowledge has been
obtained.

(b) Contributor APIs

If Contributor's Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor
must also include this information in the LEGAL file.

(c) Representations.
Contributor represents that, except as disclosed pursuant to Section 3.4 (a) above, Contributor believes that Contributor's Modifications are Contributor's original creation(s) and/or Contributor has
sufficient rights to grant the rights conveyed by this License.

3.5. Required Notices. You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a particular Source Code file due to its structure, then You
must include such notice in a location (such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more Modification(s) You may add your name as a
Contributor to the notice described in Exhibit A. You must also duplicate this License in any documentation for the Source Code where You describe recipients' rights or ownership rights relating to
Covered Code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of Covered Code. However, You may do so only on
Your own behalf, and not on behalf of the Initial Developer or any Contributor. You must make it absolutely clear than any such warranty, support, indemnity or liability obligation is offered by You
alone, and You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of warranty, support, indemnity
or liability terms You offer.

3.6. Distribution of Executable Versions. You may distribute Covered Code in Executable form only if the requirements of Sections 3.1, 3.2, 3.3, 3.4 and 3.5 have been met for that Covered Code, and
if You include a notice stating that the Source Code version of the Covered Code is available under the terms of this License, including a description of how and where You have fulfilled the
obligations of Section 3.2. The notice must be conspicuously included in any notice in an Executable version, related documentation or collateral in which You describe recipients' rights relating to
the Covered Code. You may distribute the Executable version of Covered Code or ownership rights under a license of Your choice, which may contain terms different from this License, provided that
You are in compliance with the terms of this License and that the license for the Executable version does not attempt to limit or alter the recipient's rights in the Source Code version from the rights
set forth in this License. If You distribute the Executable version under a different license You must make it absolutely clear that any terms which differ from this License are offered by You alone, not
by the Initial Developer or any Contributor. You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result
of any such terms You offer.

3.7. Larger Works. You may create a Larger Work by combining Covered Code with other code not governed by the terms of this License and distribute the Larger Work as a single product. In such a
case, You must make sure the requirements of this License are fulfilled for the Covered Code.

4. Inability to Comply Due to Statute or Regulation.

If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered Code due to statute, judicial order, or regulation then You must: (a) comply with
the terms of this License to the maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in the LEGAL file described in Section 3.4 and
must be included with all distributions of the Source Code. Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to
be able to understand it.

5. Application of this License.

This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered Code.

6. Versions of the License.

6.1. New Versions

6.1. New Versions
Netscape Communications Corporation ("Netscape") may publish revised and/or new versions of the License from time to time. Each version will be given a distinguishing version number.

6.2. Effect of New Versions

Once Covered Code has been published under a particular version of the License, You may always continue to use it under the terms of that version. You may also choose to use such Covered Code
under the terms of any subsequent version of the License published by Netscape. No one other than Netscape has the right to modify the terms applicable to Covered Code created under this
License.

6.3. Derivative Works

If You create or use a modified version of this License (which you may only do in order to apply it to code which is not already Covered Code governed by this License), You must (a) rename Your
license so that the phrases "Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL", "NPL" or any confusingly similar phrase do not appear in your license (except to note that your license differs from
this License) and (b) otherwise make it clear that Your version of the license contains terms which differ from the Mozilla Public License and Netscape Public License. (Filling in the name of the Initial
Developer, Original Code or Contributor in the notice described in Exhibit A shall not of themselves be deemed to be modifications of this License.)

7. DISCLAIMER OF WARRANTY
COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES
THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
COVERED CODE IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY
NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED
HEREUNDER EXCEPT UNDER THIS DISCLAIMER.

8. Termination

8.1. This License and the rights granted hereunder will terminate automatically if You fail to comply with terms herein and fail to cure such breach within 30 days of becoming aware of the breach.
All sublicenses to the Covered Code which are properly granted shall survive any termination of this License. Provisions which, by their nature, must remain in effect beyond the termination of this
License shall survive.

8.2. If You initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against Initial Developer or a Contributor (the Initial Developer or Contributor against
whom You file such action is referred to as "Participant") alleging that:

a. such Participant's Contributor Version directly or indirectly infringes any patent, then any and all rights granted by such Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon
60 days notice from Participant terminate prospectively, unless if within 60 days after receipt of notice You either: (i) agree in writing to pay Participant a mutually agreeable reasonable royalty for
Your past and future use of Modifications made by such Participant, or (ii) withdraw Your litigation claim with respect to the Contributor Version against such Participant. If within 60 days of notice,
a reasonable royalty and payment arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not withdrawn, the rights granted by Participant to You under
Sections 2.1 and/or 2.2 automatically terminate at the expiration of the 60 day notice period specified above.
b. any software, hardware, or device, other than such Participant's Contributor Version, directly or indirectly infringes any patent, then any rights granted to You by such Participant under Sections
2.1(b) and 2.2(b) are revoked effective as of the date You first made, used, sold, distributed, or had made, Modifications made by that Participant.

8.3. If You assert a patent infringement claim against Participant alleging that such Participant's Contributor Version directly or indirectly infringes any patent where such claim is resolved (such as
by license or settlement) prior to the initiation of patent infringement litigation, then the reasonable value of the licenses granted by such Participant under Sections 2.1 or 2.2 shall be taken into
account in determining the amount or value of any payment or license.

8.4. In the event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by You or any distributor
hereunder prior to termination shall survive termination.

9. LIMITATION OF LIABILITY
UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER
CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER
COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR
DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.

10. U.S. government end users

The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software
documentation," as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users
acquire Covered Code with only those rights set forth herein.

11. Miscellaneous
This License represents the complete agreement concerning subject matter hereof. If any provision of this License is held to be unenforceable, such provision shall be reformed only to the extent
necessary to make it enforceable. This License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise), excluding its conflict-of-law provisions.
With respect to disputes in which at least one party is a citizen of, or an entity chartered or registered to do business in the United States of America, any litigation relating to this License shall be
subject to the jurisdiction of the Federal Courts of the Northern District of California, with venue lying in Santa Clara County, California, with the losing party responsible for costs, including without
limitation, court costs and reasonable attorneys' fees and expenses. The application of the United Nations Convention on Contracts for the International Sale of Goods is expressly excluded. Any
law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this License.

12. Responsibility for claims

As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this License and You agree to
work with Initial Developer and Contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute any admission of liability.

13. Multiple-licensed code

Initial Developer may designate portions of the Covered Code as "Multiple-Licensed". "Multiple-Licensed" means that the Initial Developer permits you to utilize portions of the Covered Code under
Your choice of the MPL or the alternative licenses, if any, specified by the Initial Developer in the file described in Exhibit A.

Exhibit A - Mozilla Public License.

"The contents of this file are subject to the Mozilla Public License Version 1.1 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.mozilla.org/MPL/

Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and
limitations under the License.

The Original Code is ______________________________________.

The Initial Developer of the Original Code is ________________________.

Portions created by ______________________ are Copyright (C) ______
_______________________. All Rights Reserved.

Contributor(s): ______________________________________.

Alternatively, the contents of this file may be used under the terms of the _____ license (the "[___] License"), in which case the provisions of [______] License are applicable instead of those above.
If you wish to allow use of your version of this file only under the terms of the [____] License and not to allow others to use your version of this file under the MPL, indicate your decision by deleting
If you wish to allow use of your version of this file only under the terms of the [____] License and not to allow others to use your version of this file under the MPL, indicate your decision by deleting
the provisions above and replace them with the notice and other provisions required by the [___] License. If you do not delete the provisions above, a recipient may use your version of this file
under either the MPL or the [___] License."

NOTE: The text of this Exhibit A may differ slightly from the text of the notices in the Source Code files of the Original Code. You should use the text of this Exhibit A rather than the text found in the
Original Code Source Code for Your Modifications.

MPL-2.0

Mozilla Public License Version 2.0

1. Definitions

1.1. "Contributor" means each individual or legal entity that creates, contributes to the creation of, or owns Covered Software.

1.2. "Contributor Version" means the combination of the Contributions of others (if any) used by a Contributor and that particular Contributor's Contribution.

1.3. "Contribution" means Covered Software of a particular Contributor.

1.4. "Covered Software" means Source Code Form to which the initial Contributor has attached the notice in Exhibit A, the Executable Form of such Source Code Form, and Modifications of such
Source Code Form, in each case including portions thereof.

1.5. "Incompatible With Secondary Licenses" means

(a) that the initial Contributor has attached the notice described in Exhibit B to the Covered Software; or

(b) that the Covered Software was made available under the terms of version 1.1 or earlier of the License, but not also under the terms of a Secondary License.

1.6. "Executable Form" means any form of the work other than Source Code Form.

1.7. "Larger Work" means a work that combines Covered Software with other material, in a separate file or files, that is not Covered Software.

1.8. "License" means this document.

1.9. "Licensable" means having the right to grant, to the maximum extent possible, whether at the time of the initial grant or subsequently, any and all of the rights conveyed by this License.

1.10. "Modifications" means any of the following:

(a) any file in Source Code Form that results from an addition to, deletion from, or modification of the contents of Covered Software; or

(b) any new file in Source Code Form that contains any Covered Software.

1.11. "Patent Claims" of a Contributor means any patent claim(s), including without limitation, method, process, and apparatus claims, in any patent Licensable by such Contributor that would be
infringed, but for the grant of the License, by the making, using, selling, offering for sale, having made, import, or transfer of either its Contributions or its Contributor Version.

1.12. "Secondary License" means either the GNU General Public License, Version 2.0, the GNU Lesser General Public License, Version 2.1, the GNU Affero General Public License, Version 3.0, or any
later versions of those licenses.

1.13. "Source Code Form" means the form of the work preferred for making modifications.

1.14. "You" (or "Your") means an individual or a legal entity exercising rights under this License. For legal entities, "You" includes any entity that controls, is controlled by, or is under common
control with You. For purposes of this definition, "control" means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b)
ownership of more than fifty percent (50%) of the outstanding shares or beneficial ownership of such entity.

2. License Grants and Conditions

2.1. Grants
Each Contributor hereby grants You a world-wide, royalty-free, non-exclusive license:

(a) under intellectual property rights (other than patent or trademark) Licensable by such Contributor to use, reproduce, make available, modify, display, perform, distribute, and otherwise exploit
its Contributions, either on an unmodified basis, with Modifications, or as part of a Larger Work; and

(b) under Patent Claims of such Contributor to make, use, sell, offer for sale, have made, import, and otherwise transfer either its Contributions or its Contributor Version.

2.2. Effective Date

The licenses granted in Section 2.1 with respect to any Contribution become effective for each Contribution on the date the Contributor first distributes such Contribution.

2.3. Limitations on Grant Scope

The licenses granted in this Section 2 are the only rights granted under this License. No additional rights or licenses will be implied from the distribution or licensing of Covered Software under this
License. Notwithstanding Section 2.1(b) above, no patent license is granted by a Contributor:

(a) for any code that a Contributor has removed from Covered Software; or

(b) for infringements caused by: (i) Your and any other third party's modifications of Covered Software, or (ii) the combination of its Contributions with other software (except as part of its
Contributor Version); or

(c) under Patent Claims infringed by Covered Software in the absence of its Contributions.

This License does not grant any rights in the trademarks, service marks, or logos of any Contributor (except as may be necessary to comply with the notice requirements in Section 3.4).

2.4. Subsequent Licenses

No Contributor makes additional grants as a result of Your choice to distribute the Covered Software under a subsequent version of this License (see Section 10.2) or under the terms of a Secondary
License (if permitted under the terms of Section 3.3).

2.5. Representation
Each Contributor represents that the Contributor believes its Contributions are its original creation(s) or it has sufficient rights to grant the rights to its Contributions conveyed by this License.
2.6. Fair Use
This License is not intended to limit any rights You have under applicable copyright doctrines of fair use, fair dealing, or other equivalents.

2.7. Conditions
Sections 3.1, 3.2, 3.3, and 3.4 are conditions of the licenses granted in Section 2.1.

3. Responsibilities

3.1. Distribution of Source Form

All distribution of Covered Software in Source Code Form, including any Modifications that You create or to which You contribute, must be under the terms of this License. You must inform
recipients that the Source Code Form of the Covered Software is governed by the terms of this License, and how they can obtain a copy of this License. You may not attempt to alter or restrict the
recipients' rights in the Source Code Form.

3.2. Distribution of Executable Form

If You distribute Covered Software in Executable Form then:

(a) such Covered Software must also be made available in Source Code Form, as described in Section 3.1, and You must inform recipients of the Executable Form how they can obtain a copy of such
Source Code Form by reasonable means in a timely manner, at a charge no more than the cost of distribution to the recipient; and

(b) You may distribute such Executable Form under the terms of this License, or sublicense it under different terms, provided that the license for the Executable Form does not attempt to limit or
alter the recipients' rights in the Source Code Form under this License.

3.3. Distribution of a Larger Work

You may create and distribute a Larger Work under terms of Your choice, provided that You also comply with the requirements of this License for the Covered Software. If the Larger Work is a
combination of Covered Software with a work governed by one or more Secondary Licenses, and the Covered Software is not Incompatible With Secondary Licenses, this License permits You to
additionally distribute such Covered Software under the terms of such Secondary License(s), so that the recipient of the Larger Work may, at their option, further distribute the Covered Software
under the terms of either this License or such Secondary License(s).

3.4. Notices
You may not remove or alter the substance of any license notices (including copyright notices, patent notices, disclaimers of warranty, or limitations of liability) contained within the Source Code
Form of the Covered Software, except that You may alter any license notices to the extent required to remedy known factual inaccuracies.

3.5. Application of Additional Terms

You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of Covered Software. However, You may do so only on Your own
behalf, and not on behalf of any Contributor. You must make it absolutely clear that any such warranty, support, indemnity, or liability obligation is offered by You alone, and You hereby agree to
indemnify every Contributor for any liability incurred by such Contributor as a result of warranty, support, indemnity or liability terms You offer. You may include additional disclaimers of warranty
and limitations of liability specific to any jurisdiction.

4. Inability to Comply Due to Statute or Regulation

If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered Software due to statute, judicial order, or regulation then You must: (a) comply
with the terms of this License to the maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be placed in a text file included with all distributions
of the Covered Software under this License. Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to be able to
understand it.

5. Termination

5.1. The rights granted under this License will terminate automatically if You fail to comply with any of its terms. However, if You become compliant, then the rights granted under this License from
a particular Contributor are reinstated (a) provisionally, unless and until such Contributor explicitly and finally terminates Your grants, and (b) on an ongoing basis, if such Contributor fails to notify
You of the non-compliance by some reasonable means prior to 60 days after You have come back into compliance. Moreover, Your grants from a particular Contributor are reinstated on an ongoing
basis if such Contributor notifies You of the non-compliance by some reasonable means, this is the first time You have received notice of non-compliance with this License from such Contributor,
and You become compliant prior to 30 days after Your receipt of the notice.

5.2. If You initiate litigation against any entity by asserting a patent infringement claim (excluding declaratory judgment actions, counter-claims, and cross-claims) alleging that a Contributor
Version directly or indirectly infringes any patent, then the rights granted to You by any and all Contributors for the Covered Software under Section 2.1 of this License shall terminate.

5.3. In the event of termination under Sections 5.1 or 5.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by You or Your distributors
under this License prior to termination shall survive termination.

6. Disclaimer of Warranty
Covered Software is provided under this License on an "as is" basis, without warranty of any kind, either expressed, implied, or statutory, including, without limitation, warranties that the Covered
Software is free of defects, merchantable, fit for a particular purpose or non-infringing. The entire risk as to the quality and performance of the Covered Software is with You. Should any Covered
Software prove defective in any respect, You (not any Contributor) assume the cost of any necessary servicing, repair, or correction. This disclaimer of warranty constitutes an essential part of this
License. No use of any Covered Software is authorized under this License except under this disclaimer.

7. Limitation of Liability
Under no circumstances and under no legal theory, whether tort (including negligence), contract, or otherwise, shall any Contributor, or anyone who distributes Covered Software as permitted
above, be liable to You for any direct, indirect, special, incidental, or consequential damages of any character including, without limitation, damages for lost profits, loss of goodwill, work stoppage,
computer failure or malfunction, or any and all other commercial damages or losses, even if such party shall have been informed of the possibility of such damages. This limitation of liability shall
not apply to liability for death or personal injury resulting from such party's negligence to the extent applicable law prohibits such limitation. Some jurisdictions do not allow the exclusion or
limitation of incidental or consequential damages, so this exclusion and limitation may not apply to You.

8. Litigation
Any litigation relating to this License may be brought only in the courts of a jurisdiction where the defendant maintains its principal place of business and such litigation shall be governed by laws of
that jurisdiction, without reference to its conflict-of-law provisions. Nothing in this Section shall prevent a party's ability to bring cross-claims or counter-claims.

9. Miscellaneous
This License represents the complete agreement concerning the subject matter hereof. If any provision of this License is held to be unenforceable, such provision shall be reformed only to the
extent necessary to make it enforceable. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not be used to construe this License
against a Contributor.

10. Versions of the License

10.1. New Versions

Mozilla Foundation is the license steward. Except as provided in Section 10.3, no one other than the license steward has the right to modify or publish new versions of this License. Each version will
be given a distinguishing version number.

10.2. Effect of New Versions

You may distribute the Covered Software under the terms of the version of the License under which You originally received the Covered Software, or under the terms of any subsequent version
published by the license steward.
10.3. Modified Versions
If you create software not governed by this License, and you want to create a new license for such software, you may create and use a modified version of this License if you rename the license and
remove any references to the name of the license steward (except to note that such modified license differs from this License).

10.4. Distributing Source Code Form that is Incompatible With Secondary Licenses
If You choose to distribute Source Code Form that is Incompatible With Secondary Licenses under the terms of this version of the License, the notice described in Exhibit B of this License must be
attached.

Exhibit A - Source Code Form License Notice

This Source Code Form is subject to the terms of the Mozilla Public License, v. 2.0. If a copy of the MPL was not distributed with this file, You can obtain one at http://mozilla.org/MPL/2.0/.

If it is not possible or desirable to put the notice in a particular file, then You may include the notice in a location (such as a LICENSE file in a relevant directory) where a recipient would be likely to
look for such a notice.

You may add additional accurate notices of copyright ownership.

Exhibit B - "Incompatible With Secondary Licenses" Notice

This Source Code Form is "Incompatible With Secondary Licenses", as defined by the Mozilla Public License, v. 2.0.

NTP

NTP License (NTP)

Copyright (c) (CopyrightHoldersName) (From 4-digit-year)-(To 4-digit-year)

Permission to use, copy, modify, and distribute this software and its documentation for any purpose with or without fee is hereby granted, provided that the above copyright notice appears in all
copies and that both the copyright notice and this permission notice appear in supporting documentation, and that the name (TrademarkedName) not be used in advertising or publicity pertaining
to distribution of the software without specific, written prior permission. (TrademarkedName) makes no representations about the suitability this software for any purpose. It is provided "as is"
without express or implied warranty.

OpenSSL

OpenSSL License

Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the
distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit. (http://www.openssl.org/)"

4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission,
please contact [email protected].

5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young ([email protected]). This product includes software written by Tim Hudson ([email protected]).

Original SSLeay License

Copyright (C) 1995-1998 Eric Young ([email protected]) All rights reserved.

This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4,
RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson
([email protected]).

Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the
parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the
distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement:
"This product includes cryptographic software written by Eric Young ([email protected])"
The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-).

4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by
Tim Hudson ([email protected])"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence
[including the GNU Public Licence.]

Zlib

zlib License

This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.

Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.

2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.

3. This notice may not be removed or altered from any source distribution.

curl

Copyright (c) 1996 - 2015, Daniel Stenberg, <[email protected]>.

All rights reserved.

Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all
copies.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written
authorization of the copyright holder.