UNIT 1 SECURITY CONCEPTS

Structure Page Nos.

1.1 Objectives 6
1.2 Goals of Computer Security 6
1.2.1 Integrity
1.2.2 Coafidentiality
1.2.3 Availability
1.3 Security Problem and Requirements
1.3.1 Identifying the Assets
1.3.2 ldentifylng the Threats
1.3.3 ldentifyjngthe Impact
1.4 Threats and Vulnerabilities
1.5 User Authentication
1.6 Security System and Facilities
1.6.1 System Access Control
1.6.2 Password Management
1.6.3 Privileged User Management
1.6.4 User Account Management
1.6.5 Data Resource Protection
1.6.6 Sensitive System Protection
1.7 Cryptography 17
1.8 Intrusion Detection 18
I .9 Computer- Security Classifications 19
1.10 Summary 21

1.12 Further Readings 22

1.0 INTRODUCTION
Computer Security can be defined as technological and managerial procedures applied
to computer systems to ensure the availability, integrity, and confidentiality ofthe
information managed by the computer. It means the protection of Integrity, Availability
and Confidentiality of Computer Assets and Services from associated Threats and
vulnerabilities.
Security is divided into two categories; (a) computer security and (b) network security.
In generic terms, computer security is the process of securing a single, standalone
computer; while network security is the process of securing an entire network of
computers.

a) Computer Security: Technology and managerial procedures applied t a

computer systems to ensure the availability, integrity, and confidentiality of the
data managed by the computer.
(b) Network Security: Protection of networks and their services from unauthorised
modification, destruction, ordisclosureand provision of assurance that the network
performs its critical functions correctly and there are no harmful side effects.
The major weakneses in a computer system pertain to hardware, software, and
data. However, other components of the computer systems may also be targeted.

1.1 OBJECTIVES
After going through this unit you will be able to:
know of the threats to computer security;
understand what causes these threats, and
know various security techniques.

1.2 GOALS OF COMPUTER SECURITY

The goals of computer security are integrity, confidentiality, and availability of the
information managed by the computer system. The relationship among the three is
shown in Figure I .

1.2.1 Integrity
The data Integrity in computer security deals with the knowledge that data has not
been modified. Data Integrity is related to data accuracy, but integrity and accuracy
are not the same. For example, if information is entered incorrectly, it will remain
incorrect. So, it is possible to have Data Integrity without Data Accuracy.
Integrity means preventing unauthorised modification. To preserve the integrity of an
item means that the item is unmodified, precise, accurate, modified in an acceptable
way by authorised people, or consistent.
1.2.2 Confidentiality
Confidentiality means preventing unauthorised access. It ensures that only the
authorised person accesses the computer system. Not all data available on the
computer falls in the category of confidential data. There is data that can be made
public and there is data that is considered sensitive. It is this critical or sensitive dsr~a
that will require confidentiality. Data confidentiality cannot be enforced unless data
integrity is present. The following items could require data confidentiality: credit card
files, medical records, personnel data, mission-critical data, and R&D data etc.

1.2.3 Availability
There is no point in making the computer system so secure that no users can access
the data they need to perform their jobs effectively.
The system should be accessible to authorised persons at appropriate times.
A computer system is available if
The response time is acceptable
There is a fair allocation of resources
Fault tolerance exists
It is user friendly
Concurrency control and deadlock management exists. Terms like concurrency
control and deadlock manbgeinent will be discussed in the operating system course. Security Concepts

Figure I: Relationship between Confidentiality, Integrity, and Availability

1.3 SECURITY PROBLEM AND REQUIREMENTS

Protection of information has been a major challenge since the beginning of the
computer age. The computer security problem has grown with the computer industry,
the comp~~ter itself was not really part of the security problem or its solution.

Connecting computers introduces a need for communication security (often utilising

cryptography)to prevent the possibility of an attack. Connecting computers gives them
greater accessibility, which increases computer security problems.

Computer security attempts to ensure the confidentiality, integrity, and availability of

the computing system's components. The principal components of a computing
system subject to attacks are: hardware, software and data. These three components
and the com~nunicationsamong them is the basis of computer vulnerabilities.
Attackers can devise attacks that exploit these vulnerabilities. There are basically four
kinds of attacks on computing systems: interception, interruption, modification,
and fabrication. These terms will be explained later.
One of the ways to identify security problems is by means of risk analysis. Risk
analysis involves determining:
What you need to protect,
What you need to protect it from,
And how to protect it.
It is the process of examining all of your risks, and ranking those risks by level of
severity.
There are three major steps in risk analysis, namely:
Identifying the assets (what are you protecting)
Identifying the threats (against what)

Identifying impact.

1.3.1 Identifying the Assets

Hardware: CPUs, boards, keyboards, terminals, workstations, personal

 computers, printers, disk drives, con~municationlines, terminal servers, routers,
Management hubs, gateways, servers, modems, etc.
Software: source programs, object programs, utilities, diagnostic programs,
operating systems, communications program, firewall software, IDS (Intrusion
Detection System) software etc.
Data: during execution, store on-line, archive off-line, backup, audit logs,
databases, in transit over communication media etc.
a People: user, people needed to run systems.
Documentation: on programs, hardware, systems, local administrative
procedures.
Supplies: paper, forms, ribbons, floppy diskettes, magnetic media.
Based on the above, asset inventory call be created with the following component for
each asset:
Designated owner
General support system or criticallmajor application
Physicalllogical location.

1.3.2 Identifying the Threats

Once the assets requiring protection are identified, it is necessary to identify threats to
those assets. The threats can be then evaluated to determine what potential for loss
exists.
There are two basic type of threats: accidental threats and intentional threats.
Accidental threats can lead to exposure of confidential information or causing an illegal
system state to occur due to modification of information. An intentional threat is an
action performed by an entity with the intention to violate security. And this includes
destruction, modification, fabrication, interruption or interception of data.
In general, threats to an asset should be considered in terms of the availability,
confidentiality and integrity of the asset. The possible threats to a computer system
can be:
Unauthorised Access
Disclosure of information
Denial of service.
1.3.3 Identifying the Impact
After identifying the assets and threats, the impact of security attack should be
assessed. The process includes the following tasks.
Identifying the vulnerabilities ofthe system;
Analysing the possibility ofthreats to exploit these vulnerabilities;

b
Assessing the consequences of each threat;
Estimating the cost'of each attack;
Estimating the cost of potential counter measure, and
Selecting the optimum and cost effective security system.
The consequence of a threat materialised in an organisation could result in one or more Security Concepts
impacts. For example, an impact can be:

Infringement of privacy

Financial loss

Disruption of activities.

1.4 THREATS AND VULNERABILITIES

With the rise of multiprogramming,the several aspects of a computing system
requiring protection are system software, memory, sharable I/O devices such as disk,
printers, tape drivers, shared programs/procedures, networks, shared data, files, and
execution enviroi1ment.A threat is a set of instances that has the capability of causing
loss or harm to the computer system. There are many threats to a computer system
and can be (a) Human initiated, (b) Computer initiated, and (c) Natural disasters like
flood or earthquake.

A threat can be accidental or deliberate and the various types of security breaches can
be classified as (a) interruption, (b) interception, (c) modification and (d) fabrication.

Interruption: An asset of the system becomes lost, unavailable, or unusable.

Malicious destruction of a hardware device

Deletion of program or data file

Malfunctioning of an Operating system.

Interception: Some uilauthorised entity can gain access to a computer asset. This
unauthorised entity can be a person, a program, or a computer system.

Illicit copying of program or data files

Wiretapping to obtain data.

Modification: Some unauthorised party not only accesses but also tampers with
the computer asset.

Change in the values in the database

Alter a program

Modify data being transmitted electronically

Modification in hardware.

Fabrication: Some unauthorised party creates a fabrication of counterfeit object

of a system. The intruder may put spurious transaction in the computer system or
modify the existing database.

An attacker needs three things ( I ) method, (2) opportui~ityand (c) motive.

A method: It comprises the tools, skills, knowledge etc.

Opportunity: Opportuility means the right time and right access to perform
the attack.

Motive: Motive is the reason to carry out the attack.

A threat can be blocked by control of vulnerability. We can use a control as a
protective measure. A control can be in action, device, procedure and technique that
limits or eliminatesvulnerability.

A computer system has three valuable components as pointed out earlier: hardware,
software and data. Vulnerability is a weakness in the system. This weakness may be
exploited by threats causing lossldamage or harm to the system. Vulnerability does not
cause any harm unti! exploited. It can be a weakness in: (a) Procedures, (b) Design
and (c) Implementation.

The various vulnerability examples are: insufficient security training, lack of security
awareness, inadequate recruitment procedures, insufficient preventive maintenance,
lack of identification and authentication mechanisms, transfer of password in readable
form (clear text), unprotected public network connections, poor password management,
well-known flaws in the software, unsupervised work by external staff, no security
policy, exposedJunprotected communication lines, poor cable joint, inadequate system
management, no audit-trail, wrong allocation of access rights or permissions, lack of
docu~nentationand dialup connections, etc.

The computing system vulnerabilities are:

e Software vulnerabilities: software vulnerability can be due to interruption,

interception, modification, or fabrication. The examples of software vulnerabilities
are: (a) destroyedJde1eted software, (b) stolen or pirated software, (c) unexpected
behaviour and flaws, (d) non-malicious program errors, (e) altered (but still run)
software.

Hardware vulnerabilities: hardware vulnerability is caused due to interruption

(denial of service), modification, fabrication (substitution) and interception (theft).

Data vulnerabilities: Data vulnerability is caused by interruption (results in loss of

data), interception of data, modification of data and fabrication of data.

Human vulnerabilities: The various human generated vulnerabilities are break-ins,

virus generation, security violation, inadequate training.

Check Your Progress 1

1) What are the Goals of Computer Security'?

................................................................................................................................

................................................................................................................................

................................................................................................................................
2) Justifj, the following statement:

" There is no confidentiality without integrity"

................................................................................................................................

................................................................................................................................

................................................................................................................................

................................................................................................................................
 \ f

1.5 USER AUTHENTICATION

Authentication in a computer system uses any of three qualities to authenticate the
user:
Something the user knows, like password, PIN numbers; pass phrases, a secret
handshake etc.
Something the user has: Identity badges, physical keys, a driver's license, or a
uniform.
Something the user is: This is based on the physical characteristic of the user
(Biometries), such as a finger print, face recognition, voice recognition etc.
/

Two or more methods can be combined for more solid authentication; for example, an
identity card and PIN combination.
The computer system needs a system in place to be sure that only authorised users
have access to its resources. On the computer system, one of the critical areas of
security is who has access to what.
There are two types of access control that can be implemented:
Mandatory Access Control (MAC) : MAC is an access control policy that
supports a system with highly secret or sensitive information. Government
agencies typically use a MAC.
Discretionary Access Control (DAC) : DAC is an access control policy that uses
the identity of the user or group that they belong to allow authorised access. It is
discretionary in that the administrator can control who has access, to what and
what type of access will they have, such as create or write, read, update, or
delete.
Authentication occurs when a user provides the requested information to an
authentication verification authority. The traditional method of authentication is to
provide a password.
To increase the level of reliability, biometric authentication can be introduced. The user
is not only identified digitally, but by their physical characteristics such as fingerprint
scan, iris scans or hand geometry.
Authentication Token: It is a portable device used for authenticating a user. The
tokens are devices that operate by using systems such as:

Hardware Tokens
-
Challenge and response: It is an authentication technique using a calculator
type of token that contains identical security keys or algorithms as Access
Server, which sends an unpredictable challenge to the user, who compupes a
response using their authentication response token.
Time-based challenge response "'Token:The Time-based Token ~ltilisesan
authentication method where the security token and server use an identical
algorithm. To gain access, the user takes the code generated by the token and
adds his or her user name and PIN to create a pass code. The pass code is
combined with a seed value and the current time, encrypted with an algorithm
and sent to the server. The server authenticates the user by generating its own
version of the valid code by accessing the pre-registered PIN and using the same
seed value and algorithm for validation.
Security and Software Token
Management
If an organisation does not wish to purchase hardware tokens, it may opt for a
software type instead. A software token is an authentication process using portable
devices such as a Palm Pilot, Palm PC, or wireless telephone to carry the embedded
software.

1.6 SECURITY SYSTEM AND FACILITIES

Security controls should be illstalled and maintained on each computer system or
computer node to prevent unauthorised users from gaining entry to the information
system and to prevent unauthorised access to data.
System software a i d resources should be accessible after being authenticated by
access control system.

1.6.1 System Access Control

Access to information system resources like memory, storage devices etc.,
sensitive utilities and data resources and programme files shall be controlled and
restricted on "need-to-use" basis.
The access control software or operating system should be providing features to
restrict access to the system and data resources. The use of common passwords
such as "administrator" or "president" or "game", etc,. to protect access to the
system and data resources should be avoided.
*. Guidelines and proced~~res
governing access authorisation shall be developed,
documented and implemented.
Each user shall be assigned a unique user ID.
Stored passwords shall be encrypted using internationally proven encryption
techniques to prevent unauthorised access.
Automatic time-out for terminal inactivity should be implemented.
Audit trail of security sensitive access and actions shall be logged.
Audit trails must be protected against modification or deletion.
Activities of al I remote users shall be logged and monitored closely.
The startup and shutdown procedure of the security software must be automated.
Sensitive operating system files must be protected using proven tools and
techniques.

1.6.2 Password Management

Certain minimum quality standards for password shall be enforced. The following
control features shall be implemented for passwords:
Minimum of 8 characters without leading or trailing blanks;
Shall be different from existing passwords;
To be changed at least once every 90 days and for sensitive systems it should be
changed every 30 days;
Should not be shared, displayed or printed;
Password retries should be limited to a maximum of 3 attempted logons after
which the user ID shall then be revoked for sensitive systeliis;
 Passwords, which are easy to guess. should be avoided; Security Concepts

Password shall always be of encrypted form to avoid disclosure, and

All passwords must be resistant to dictionary attacks and all known password
cracking algorithms.
1.6.3 Privileged User Management
The following points must be taken into account while granting privilege to users.
Privileges shall be granted only on a need-to-use basis.
Login available only from console.
Audit log should be maintained.
1.6.4 User Account Management
Procedures for user account management should be established to control access to
application and data. It sl10~11dinclude:
Should be an authorised user.
A written statement of access rights should be given to all users.
A formal record of all registered users shall be maintained.
Access rights of users who have been transferred, or left the organisation, shall
be removed immediately.
A periodic check/review shall be carried out for redundant user accounts and
access right that is no longer required.

Redundant user accounts should not be reissued to another user.

1.6.5 Data and Resource Protection
All information shall be assigned an owner responsible for integrity of data and
resource. This will help in protection of data and resources to a great extent. And this
assignment of responsibility should be formal and top management must supervise the
whole process of allocation of responsibilities.
1.6.6 Sensitive System Protection
Security tokenlsmart cardslbio-metric technologies such as iris recognition, finger
print verification technologies, etc,. shall be used to complement the usage of
password to access the computer system.
Encryption should be used to protect the integrity and confidentiality of sensitive
data. In this unit we will discuss various techniques used in the protection of
sensitive computer systems and networks.
Data backup and Off-site Retention
Backup procedures shall be documented, scheduled and monitored.
Upto date backup of critical items shall be maintained. These items include: data
files, util itieslprogram~nes,databases, operating system code, encryption keys,
documentation, ful llincremental backup frequencies as per schedule.

Firewall
The firewall is the first line of defense for any computer system or network. All
packets that enter the network should come through this point. A modern firewall is a
system of applications and hardware working together. A sophisticated firewall
performs a combination of packet filtering, network address translation (NAT), and
proxy services. These applications are depicted in Figures 2, 3 and 4 respectively.

Firewalls have two general methods of implementing security for a network. Although
variations between these two exist, most modifications belongs to one or the other of
the following:

- packet filtering and

- proxy server (Application Gateway)

Packet Filtering were designed to look at header information of the packet. Packet
Filtering, shown in Figure 2, was the first type of firewall used by many organisations
to protect their network. The general method of implementing a packet filter was to
use a router. These routers had the ability to either permit or deny packets based on
simple rules.

Proxy Servers use software to intercept network traffic that is destined for a given
application. The proxy server, shown in Figure 3, recognises the request, and on
behalf of the client makes the request to the server. In this, the internal client never
makes a direct connection to the external server. Instead, the proxy functions as man-
in-the-middle and speaks to both the client and server, relaying the message back and
forth. The addition of proxy server capabilities added to lhe firewalls created a much
more solid security product than a pure packet filter. Proxy software can make

a
decisions based on more than the header information of a packet.

Packet Private
INTERNET Filtering Network
Router

Figure 2: Packet. Filtering Router

Private
b Network

Figure 3: Application level gateway or Proxy server

A firewall can have a negative impact on the network by blocking access to the
desired resources. This is due to improper configuration of a firewall that makes the
desired resource unavailable. Additionally, if an ordinary PC has been configured to be
the firewall (a multi-homed computer) it may not have the internal speed to perform all
the functions of the firewall fast enough, resulting in increased latency.
Encryption
Central to all security meclianisni
Confidentiality of data
 Some protocols rely on encryption to ensure availability of resources. Security Concepts

The encryption process as a whole is taking data that is plain text (readable form), and
using a mathematical technique to make the text unreadable. The receiver then
performs a similar technique to decrypt the message. The process of encrypton and
decrypton is shown in Figure 4.
Ellcryption Key , Decryption Key Cipher text

Plain text 4Wl-bl Decryption )------)I Plain text I

Figure 4: Encryption1 Decryption Mechanism
The performance hit is much more obvious in encryption. If the data packets are
encrypted, the information that must be transmitted is bigger, and more bandwidth will
be required. Additionally there will be more overheads on devices for performing
encryption and decryption.
'The computer that is asked to perfonn encryption and decryption must be able to
handle extra workload.

Intrusion Detection System (IDS)

Intrusion Detection Syste~nsare a combination of hardware and software systems that
monitor and collect information and analyse it to detect attacks or intrusions. Some
IDSs can automatically respond to an intrusion based on collected library of attack
signatures. IDSs uses software based scanners, such as an Internet scannel; for
vulnerability analysis.
Intrusion detection software builds patterns of normal system usage; triggering an
alarm any time when abnormal patterns occur.
What IDS can do?
By using various techniques it attempt to detection of intrusion into a computer or
network by observation of actions, security logs, or audit data.
Detection of break-ins or attempts via software systems that operate on logs or
alert information.
Cannot stop crime, o~ilyprevent and provide evidence for investigations.

Software Controls
lnternal program controls
OS controls

Development controls.

Hardware controls
Locks or blocks limitingaccess
Hardware or smart card based encryption
Devices for user's authentication

Mechanism to control access to storage media.

I
Security and Policies
Management
The security policies and procedures must be properly implemented to ensure their
proper use.

Physical Controls
Easy to implement, effective and less costly
Include locks on doors, guards at entrylexit points
Backup copies of critical software and data
. Access Control

Media Control
Precautions against water and fire damage
Air conditioning
Physical site planning that minimizes the risk of natural disasters.

System Security
International Security Standards: Most computer vendors nowadays adopt
international standards into building security facilities into their system.

Computer Virus
Computer should be equipped with updated virus protection and detection
software.
' Virus detection software must check storage drives both internal and external to
the system on a regular basis.
All diskettes and software shall be screened and verified by virus scanner
software before being loaded onto the computer system.
Personnel Security
I
Personnel security is everything involving employees, who are potential elements of
breaches of security.
Hiring them
Training them
Monitoring them

1I
Handling their departure
Why personnel Security?
Most of the Security breaches are caused by people only like, break-ins, virus
generation etc.
' Statistics reveal that the most common perpetrators of significant computer crime
are the legitimate users of the computer system.
Some studies show that over 80% of incidents are due to internal users. 1
Auditing r ,

Auditing is a tedious process and requires a good eye for details.

 Track everyone who logs on and off the computer system. Security Concepts

Audit movement ofcritical files, attempted deletion or access to mission-critical

data.

* ~ ~flags to watch for in auditing are - ~nultiplebad logon

Some of tlie c o ~ n m ored
attempts, or same account trying to log in from many locations at the same time,
and attempted shutdown of critical servers.
It is due to time-consum~ngprocess of reading the logs that many colnpanies avoid
auditing of log files. The organisatioi~that takes the log files for granted will end up as
one that is unable to inform the legal agencies that an incident has really happened.

c p Check Your Progress 2

1) l d e ~ i t i computer
f~ assets in your organisation.

...............................................................................................................................

................................................................................................................................

.................................................................................................................................

2) Identify threats to assets listed in progress 1 above.

..............................................................................................................................

................................................................................................................................
...............................................................................................................................

3) Identify the impact of security attack listed in 2 above.

.............................................................................................................................

...............................................................................................................................

................................................................................................................................

1.7 CRYPTOGRAPHY
A cryptosystern is an algorithm, plus all possible plaintexts, cipher texts, and keys.
A cryptographic algorithm, also called a cipher, is the mathematical function used for
encryption (E) and decryption (D). The key is a large number. The range of possible
values of the key is called the key space. Both encryption and decryption use this key
space.
E,[M] = C

D,[C] =M
PLAIN TFXT

Figure 5: Encryption & Decryption using same key

Sometimes algorithms use a different encryption and decryption key. The encryption
key K1 is different from decryption key K 2 (Figure 6).
E,,[M] = C
D,,[CI = M
Or D,,[E,,CMII = M

Figure 6: Encryption & Decryption using different keys

There are two general types of key-based algorithms: symmetric and public-key
(asymmetric algorithm). The universally accepted modern method of electronic
authentication is the one based on asymmetric cryptosystems. This is also known as
public key cryptography, and is the basis for creating digital signatures. However rapid
advancements and technological changes are challenging the supremacy of digital
signatures as the only method of electronic authentication. Bio~iietricsand dynamic
signature analysis, among other technologies, are expected to be equally important in
the years to come. It is also expected that some of the biometric techniques may prove
to be more reliable and less susceptible to cdmpromise than digital signatures. In view
of the pace of technological development, no single technology may prevail for a long
time as the sole means of electronic authentication.

1.8 INTRUSION DETECTION

ID stands for Intrusion Detection, which is the art of detecting inappropriate, incorrect,
or anomalous activity. ID systems that operate on a host to detect malicious activity on
that host are called host-based ID systems, and ID systems that operate on network
data flows are called network-based ID systems.
Sometimes, a distinction is made between misuse and intrusion detection. The term
intrusion is used to describe attacks from the outside; whereas, misuse is used to
describe an attack that originates from inside the organisation's network. However,
most people don't draw such distinctions.
The most commoli approaches to ID are statistical anomaly detection and pattern-
matching detection.
lncreased usage and consequent exposure have led to the need to develop security
components for the Web interface architecture. One sllch component is Intrusion
Detection system. Intrusion Detection systems are however complex to implement,
especially on large networks, because they generate vast quantities of data and require
significant configuration and management. IDS'S come in many forms and
implementation ~nodels.Some rule-based systems rely on preset rules. Anomaly-based
systems generate their own baseline overtime by building a database of recorded
network usage. When network usage moves outside of the developed pattern, the IDS
sounds an alarm.
In addition, IDS can be either host or network based or a combination thereof. A host
based IDS is installed on and looks for potential malicious authority on a specific
computer. A network based IDS records network traffic and scans for suspicious Security Coneepts
activity using sensors and agents installed throughout a network often through a tap off
of a hub or a switch with a spanner port. It looks for malicious commandos, repeated
failed login attempts, traffic peaking at odd hours or other evidence of possible
mischief.

1.9 COMPUTER - SECURITY CLASSIFICATIONS

The "Trusted Computer System Evaluation Criteria (TCSEC or orange book)" is the
most widely accepted standard in the industry. The TCSEC model was developed
based on a hierarchical model of security classifications.
The classes of systems recognised under the TCSEC are as follows. They are
represented in the order of increasing desirability from computer system security point
of view. I

Class D (Minimal Protection)

A system with a Class D rating does not have to pass any tests to be rated as a class
D system.
Class C I (Discretionary Securitv Protection)
For a system to have C 1 level security, it must provide a separation of users from data.
Discretionary access controls need to be available to allow a user to limit access to
data. Users must be identified and authenticated.
Class C2 (Controlled Access Protection)
For a system to have C2 level security, a user must be able to protect data so that it is
available to only one user at a time. An audit trail that tracks access and attempted
access to objects, such as files, must be kept. Further C2 security requires that all the
residual data generated in temporary memory or register is erased.
&s B 1 (Labeled Security Protection)
Systems at the B1 level of security must have mandatory access control capabilities.
Mandatory access controls limit access to objects based on the sensitivity of the
information contained in the objects and formal authorisation of subjects to access
information. The subject and objects that are controlled must be individually labeled
with a security level. Labels must include both hierarchical security level sucll as
"unclassified", "secret", and "top secret", and categories. Discretionary access control
must also be present.
Class B2 ( Structured Protection)
For a computer system to meet the 62 level of security, there must be a formal
security model. Covert channels used to transmit data must be constrained. There
niust be a verifiable top-level design, and testing [nust confirm that this design has been
i~nplemented.A security officer is designated to implement access control policies.
Class B3 (Security Domains)
The security of systems at B3 level is based on a complete and conceptually simple
model. The capability of specifying access protection for each object, and specifying
allowed subjects, the access allowed for each, and disallowed subjects must be
included. A reference monitor for accessing user's requests and allows or disallows
access based on access control policies, must be implemented. The system must be
tamper proof and highly resistant to penetration. Auditing must be available for
detection of security violations.
Class A1 (Verified Design)
The capabilities of a class A1 system are identical to those of a 8 3 system. However,
the formal model for a class A1 system must be formally verified as secure.
 Check Your Progress 3
1) Distinguish between vulnerability and threat. '

................................................................................................................................

2) List any three recent computer security failures.

3) Do you currently apply any computer security control measures? If so,

what?Against what attacks are you trying to protect?

................................................................................................................................

................................................................................................................................

................................................................................................................................

4) Discuss various security systems and facilities.

................................................................................................................................

5) What is computer-security classification?

................................................................................................................................

6) What do you understand by symmetric and asymmetric cryptography?

 Computer security attempts to ensure the integrity, confider~tiality,and availability of
computer system. Computer systems are subject to attacks: hardware, sofhvare, and
data. These three components and communication equipment associated with the
computer constitute the basis of computer security vulnerabilities. Further, the people
and systems interested in compro~nisinga system can devise attacks that exploit the
vulnerabilities. Four kinds of attacks on a computer system-interception, interruption,
modification. and fabrication-have been discussed.

Controls can be applied at the level of the data, the programs, the system, the physical
devices, the communication lines, the environment, and the personnel.

1.11 SOLUTIONS/ ANSWERS

Check Your Progress 1

1) The goals of computer security are:

a) Data integrity

b) Data confidentiality

c) Data availability

2) Confidentiality ensures that the information in a computer system and transmitted

information are accessible only for reading by authorised parties. This includes
printing, displaying, and other forms of disclosure, including simply revealing the
existence of an object. And without integrity of data, this is not possible.

I Check Your Progress 2

1) This includes hardware, sofhvare, data, people related to system operation and
managenlent, documentations, and supplies, etc.

( 2) Threats are of two types: (1) accidental threats, (2) intentional threats.

3) The impact of security attacks could be: (1) infringement of privacy, (2) financial
loss, or (3) disruption of activities.

( Check Your Progress 3

I) a) A threat is a set of instances that has the capability of causing loss or harm
to the computer system. There are many threats to a computer system and
can be (a) Human initiated, (b) Computer initiated, and (c) Natural disasters
like flood or earthquake. A threat can be accidental or deliberate and tlie
various types of security breaches can be classified as (a) interruption,
(b) interception, (c) modification, and (d) fabrication.

b) A computer system has three valuable components: hardware, software,

and data. Vulnerability is a weakness in the system. This weakness may be
exploited by threats causing lossldamage or harm to the system.
Vulnerability does not cause any harm until exploited. It can be a weakness
in: (a) procedures, (b) design, and (c) implementation.

2) "Trusted Computer System Evaluation Criteria (TCSEC or orange book)" is the

most widely accepted standard in the industry. The TCSEC model was developed
Security and based on a hierarchical model of security classifications. It i~~cludes
various
Management classes like Class D, C 1, C2, B 1,B2, B3, and A1 .

3) In the case of symmetric cryptography encryption key is same as the decryption

key. But, in asymmetric cryptography, also known as public key cryptography,
encryption key is different from the decryption key.

1.12 FURTHER READINGS

1) Information Technology Act 2000, India.
http://www.mit.gov.in/it-bill.asp

2) Cryptography and Network Security, Principles and Practice,

William Stallings-SE, PE.

3) RSA Security b Of$cial Guide to Cryptography, Steve Burnett and Stephen

Paine - RSA Press.

4) http://www.cca.gov.in Controller ofcertifying Authorities, Web Site.

5) Security in Computer, Charles P. Pfleeger and Shari Lawrence Pfleeger, Third

Edition, Pearson Education.