Seaeye Surveyor Plus System configuration
Thruster configuration, shape and light weight construction provide an ROV ideally • Inspection
suited for survey operations with the payload and interfaces to easily accommodate • Cleaning
survey peripherals. This versatile ROV is also widely used for drill support, • Construction
observation and inspection applications, the Surveyor Plus systems are also
modified to deploy SEAROV SRCT innovative cleaning tool.
www.searov-offshore.fr
Seaeye Surveyor Plus
The Surveyor Plus ROVs are launched using a gravity based crane or ‘A’ Frame LARS (Launch and Recovery System).
The Surveyor Plus serie is a development of the highly successful Seaeye Surveyor. These ROVs have more power, higher
payload and high power hydraulic supply than equivalent systems constituting a true multifunction ROV.
Operationally, the Surveyor Plus is simpler to operate and easy to maintain. The Surveyor Plus has 8 horizontal thrusters
giving a forward thrust of 125kg.
Vehicle dimension & weight Power requirements Manipulators.....................
. 1 x 5 function
Length 1450 mm manipulator
Width 820 mm LARS Launch and Recovery System
Standard equipment
Height 920 mm
Launch weight 250 kgCameras.................2 x Color CCD Camera Deployment Gravity Based Crane
Max speed 3,5 knots 1 x Black & White Low Light Camera Length 3000 mm
Payload 50 kg (optional up to 4 cameras including Width 2450 mm
zoom) Height 2500 mm
Forward thrust 125 kgf
Assistance
Pan & Tilt . ..Electrical Tilt Unit, ± 90 deg Weight 5000 kg
Vertical thrust 35kgf
Max depth rating 600m (with positional feedback displayed on (Including winch)
overlay) Winch/Power Pack dimensions
Combined control Cabin/Workshop
Any assistanceLighting...4
you may need x 150w eachROV,
about quartz-halogen
SEAROV is providing
Lenght it. 1200 mm
Configuration 1: or LED
Our experts technicians, pilots andunit (Optional may
engineers up tobe6) involved on any
Width 750 mm
Control cabin & workshop are fitted in Sonar..................... Tritech Super Seaking
kind of ROV equipments Height 1000 mm
a unique 20 ft container Compass..............................Flux-gate unit
Weight 750 kg
Length 6000 mm with solid-state rate stabilization
Cable capacity 600 m
Width 2450 mm sensor Accuracy ± 1°, Resolution 0.35°
Height 2500 mm Depth Gauge............ Electronic pressure Service team
Weight 12000 kg sensor Accuracy ± 0.1% Typical ROV team based on
Configuration 2: Auto Pilot......................... Auto Depth and 12 hours/day operations
Control cabin in a unique 10 ft container Auto Heading > 2x Pilot / Technicians
Length 3000 mm Hydraulics...........................................4kW > 1x Supervisor
Width 2450 mm motor & pump for tooling and Manips.
Height 2500 mm Valve Pack...............7-Function hydraulic
Weight 5000 kg valve pack
Options
• Tether Management System (TMS) • UT Wall thickness measurements
• SIT camera • Multi-function manipulator
• CP probe (Contact or proximity) • Hydraulic tooling
• Flooded Member Detection • SEAROV SRCT Cleaning tool
11 rue Joseph Montgolfier
34110 Frontignan
France
Tél : +33 (0) 4 67 28 08 10
Contractor (Co) Member
[email protected] www.searov-offshore.fr
