Scribd
Upload
62 views1 page

SINAMICS V20 Technical Specs

This document provides a data sheet for the SINAMICS V20 drive, including its rated data, ambient conditions, output specifications, overload capability, connections, mechanical data, standards compliance, and communication interfaces. The drive has a 0.75 kW rated power, operates on a 200-240V 1-phase input, and provides a 3-phase 230V output at up to 550 Hz. It has IP20 protection, measures 68x142x127.8 mm, and weighs 0.9 kg.

Uploaded by

Juan Diego De la Rosa tarazona
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views1 page

SINAMICS V20 Technical Specs

This document provides a data sheet for the SINAMICS V20 drive, including its rated data, ambient conditions, output specifications, overload capability, connections, mechanical data, standards compliance, and communication interfaces. The drive has a 0.75 kW rated power, operates on a 200-240V 1-phase input, and provides a 3-phase 230V output at up to 550 Hz. It has IP20 protection, measures 68x142x127.8 mm, and weighs 0.9 kg.

Uploaded by

Juan Diego De la Rosa tarazona
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Data sheet for SINAMICS V20

Article No. : 6SL3210-5BB17-5UV1

Client order no. : Item no. : Figure similar


Order no. : Consignment no. :
Offer no. : Project :
Remarks :

Rated data Ambient conditions


Input Cooling convection cooling

Number of phases 1 AC Installation altitude 1,000 m (3,280.84 ft)

Line voltage 200 ... 240 V -15 % +10 % Ambient temperature

Line frequency 47 ... 63 Hz Operation -10 ... 60 °C (14 ... 140 °F)

Output Storage -40 ... 70 °C (-40 ... 158 °F)

Number of phases 3 AC Relative humidity

Rated voltage 230V IEC 240V NEC 1) Max. operation 95 %

Rated power (LO) 0.75 kW 0.75 hp


Connections
Rated power (HO) 0.75 kW 1.00 hp Max. motor cable length
Rated current (LO) 4.20 A 4.20 A Shielded 25 m (82.02 ft)
Rated current (HO) 4.20 A 4.20 A Unshielded 50 m (164.04 ft)
Rated current (IN) 4.20 A
Mechanical data
Pulse frequency 8.00 kHz
Mounting position Wall mounting / side-by-side mounting
Output frequency 0 ... 550 Hz
Degree of protection IP20 / UL open type
Overload capability
Frame size FSAB
Low Overload (LO)
Net weight 0.90 kg (1.98 lb)
110 % rated output current for 60 s, cycle time 300 s
Dimensions
High Overload (HO)
Width 68.0 mm (2.68 in)
150 % rated output current for 60 s, cycle time 300 s
Height 142.0 mm (5.59 in)
General tech. specifications Depth 127.8 mm (5.03 in)
Power factor λ 0.72
Standards
Offset factor cos φ 0.95
Compliance with standards CE, cULus, C-Tick (RCM), KC
Efficiency η 0.98
EN 61800-5-1 /EN 60204-1 and EN
CE marking
Filter class (integrated) Unfiltered 61800-3

Communication
1)
The output current and HP ratings are valid for the voltage range 220V-240V
Communication USS, Modbus RTU

Inputs / outputs
Standard digital inputs

Number 4

Digital outputs

Number as relay changeover contact 1

Number as transistor 1

Analog inputs

2 (Can be used as additional digital


Number
input)

Analog outputs

Number 1

Technical data are subject to change! There may be discrepancies between calculated and rating plate values. Page 1 of 1 Generated Wed Jul 13 15:45:12 CET 2022

You might also like