Trademarks

From Prinect Pressroom Manager to the With Prinect Integration Manager, Prinect Pressroom Publishing Information Heidelberg, the Heidelberg logotype, Prinect, Mini Spots, Prinect Press

00.993.3663/02 en
Printed in: 03/12 Center, Prinect Pressroom Manager, Printmaster and Speedmaster
complete Prinect Workflow Manager can be extended to a complete Prinect Photographs: Heidelberger Druckmaschinen AG are registered trademarks of Heidelberger Druckmaschinen AG in the
Platemaking: Suprasetter U.S. and other countries. All other trademarks are property of their
Prinect is the modular and scaleable print shop workflow. Modules as Prinect Prepress Manager or Printing: Speedmaster respective owners.
Finishing: Stahlfolder, Stitchmaster
workflow from Heidelberg. It can be flexibly adapted Prinect Postpress Manager, as well as Prinect Consumables: Saphira Subject to technical modifications and other changes.
Fonts: HeidelbergGothicMl
to the individual requirements of every company. A Scheduler expand the possibilities to plan dead- Printed in Germany

prerequisite for the use of Prinect Pressroom Manager lines and to track a job across all departments.
is PPF data from a prepress workflow in its lowest Using this digital planning board, sudden changes
configuration. can be carried out immediately and made visible
to everyone involved.
The complete scope of functions is available only
when there is an additional JDF connection to an Prinect optimizes and automates workflows, making
MIS (Management Information System). Prinect them straightforward and transparent, based on an
Heidelberger Druckmaschinen AG
Pressroom Manager combines the JDF job tickets open data standard – the central JDF document – Kurfuersten-Anlage 52–60
generated by an MIS with the PPF data from pre- that stores all the information about a particular job. 69115 Heidelberg Prinect
press. In the next stages of the workflow, it controls Prinect therefore plays a key role in optimizing coor- Germany
the automated data flow, so the operations involved dination processes and increasing throughput while
Phone +49 6221 92-00
Fax +49 6221 92-6999
www.fsc.org
FSC ® C008807

The mark of
Pressroom Manager
in a job, including all the relevant information, are maintaining consistently high quality. www.heidelberg.com
responsible
forestry

available at the assigned press in their precise

sequence in good time ready for processing.

The completely JDF-based pressroom workflow

facilitates the exchange of data and information
between administration and production. All job data
collected by the MIS are transferred online via
Prinect Integration Manager and no longer need to
be entered again in the production department.
This makes job preparation faster and more reliable.

Management Information System (MIS)

JDF-/JMF-interface

Prinect Integration Manager

PPF
Prepress Prinect Pressroom Manager

The information and control for the pressroom in makeready times and waste at the press. The production
Full integration of every process stage gives print shops a data of the connected presses and color measurement systems
Color Measurement decisive competitive advantage. Prinect® Pressroom Manager are evaluated in Analyze Point. Informative reports supply
Presses
Systems communicates information intelligently so that print jobs are values on performance and productivity as well as information
automatically available at the right press at the right time. about jobs and their quality. With the application Prinect
This automation ensures substantially increased productivity Mobile you can access your print shop on your smartphone.
and more transparency in the pressroom. Thanks to the effi- Thus, Prinect Pressroom Manager makes it possible to react
Prinect Pressroom Manager centrally controls all communications cient use of presetting data, there is a considerable reduction rapidly, directly and flexibly to changing requirements.
in the pressroom.

5
Perfect flow of information and data • Prinect Press- Additionally, Prinect Pressroom Manager is able to write Precise job evaluation with Prinect The productivity evaluations are rounded off with a
room Manager controls every production step centrally to the Job Memory Card and USB stick storage media. Analyze Point performance comparison. They enable an in-depth
and manages the production data required. Job and This means that ink presetting data can be generated Easy-to-read and up-to-date status display insight into makeready times or production run
product information can therefore be retrieved rapidly for all Heidelberg presses with remote inking. Prinect Analyze Point continuously displays the speeds over a specific period of time or an individu-
and simply where it is needed: by the print shop current status of all on-going print jobs. Data such ally selected group of printing presses. Prinect Ana-
manager, the job administrator or directly at the control Connecting non-automated printing presses as printing speed, job information and sheet counter lyze Point generates a protocol of the results that
panel of the press. Non-automated presses can be incorporated into an numbers on waste sheets, good sheets and the makes production transparent. This enables the
efficient pressroom management system via a Data remaining print run can be called up. This makes effects of any implemented changes to be monitored
All job data at a glance • All the information on the Terminal, as can also machines from other manufac- for lean coordination processes with little organiza- and evaluated over a long period of time.
print job, such as customer data, print runs, inks and turers. Prinect Pressroom Manager then sends all its tional effort.
paper, as well as scheduled processes or processes job data to the relevant Data Terminal in the form of With the Prinect Performance Benchmarking option
that have already been carried out, are shown in detail job lists. Up-to-date machine data are entered manu- Comprehensive job evaluation • To respond fast for the press control console, the comparison of your
at every Prinect Cockpit workstation. Once a process ally and forwarded by Data Terminal directly to Prinect and flexibly to changes, the whole production work- own print shop productivity can be further enhanced
step has been started, all the machine data and status Pressroom Manager - time-saving data collection in flow needs to be analyzed regularly. Prinect Analyze by anonymous comparison with machines in other
information are reported back to Prinect Pressroom just a few steps. Point rapidly provides a user-friendly overview of the companies.
Manager in real time and are simultaneously available work performed during individual shifts and shows
at every connected workstation and in the MIS. All Making work easier for the printer how much time was needed for particular jobs. From Status information even on the go • The application
those involved are therefore always kept completely Prinect Pressroom Manager makes manual tasks, such the individual machine evaluations to an analysis of for smartphones and tablet PCs – Prinect Mobile –
up to date. as writing daily time sheets or palette notes, a thing the previous 15,000 jobs, all results are displayed in provides valuable information for print shop and
of the past. The palette note printout containing the clear graphics and tables. Deviations, delays or departmental managers as well as the sales force to
Central master data administration • Master job essential information on the job and production can Prinect Scheduler provides a complete overview of the planning increases in waste can be precisely localized. support decisions and scheduling. Prinect Mobile
status of all outstanding print jobs.
data on the customer, types of paper, inks and press be started directly at the printing press control console. Potential for optimization or savings can be identi- enables a view of current production processes, even
parameters are collected once and saved centrally in This not only makes the printer’s work easier, pallets fied and utilized more efficiently. Additionally, Pri- when you are out of the company. Depending on the
Prinect Pressroom Manager. This avoids multiple data for downstream production stages can also be much nect Analyze Point evaluates the job’s color quality configuration of the Prinect workflow system, the
entry, saving time and minimizing errors. more reliably identified, eliminating any unnecessary Reducing makeready times Automatic setup of Prinect Image Control data, so that the course of the printing quality can scheduling of pending jobs can be viewed in addition
checking or searching. Reliable color presetting • Prinect Pressroom Manager Prinect Pressroom Manager communicates directly be shown accurately and clearly. These quality to the current status of machines, shifts and jobs.
Connecting printing presses • The printer receives uses PPF data from the digital prepress department to with Prinect Image Control. According to the prepress reports are available from Prinect Image Control,
a list containing the work processes and production automatically preset printing presses. These PPF data data, print control strips, Mini Spots and controllable Prinect Inpress Control and Prinect Axis Control.
data he needs directly at the control panel of the press. are converted into area coverage values for each ink solid areas in the print image are recognized com-
Prinect Pressroom Manager supplies e. g. preview zone and the default settings are forwarded to the press pletely automatically. This facilitates the makeready Productivity evaluations and performance com-
images and data for paper, format and ink. This not control console for calculation of the ink zone open- process decisively and speeds it up significantly. parisons • With the help of the OEE figures describ-
only saves considerable time, but also significantly ings. Further parameters, such as paper and ink data ing the efficiency of the overall system according to
minimizes input errors. for automatic selection of the characteristic curves Efficient working with repeat jobs • Prinect indicators of time, speed and quality, the changing
are also forwarded to the control console. Makeready Pressroom Manager stores all the important setup productivity of a printing press can be monitored
The following machines can be integrated into times and waste are reduced substantially and inking- data for the press. This ensures highly efficient over longer periods of time.
the workflow: up of the press is much faster. It is usually possible to handling of repeat jobs, because production can be
• Speedmaster models with Prinect Press Center and save at least one pull per job. The tried and proven carried out using exactly the same presetting data.
Press Center Compact Prinect Prepress Interface presetting functions have This saves on average eight to ten minutes per
• Speedmaster models with Prinect CP2000 Center been systematically integrated into Prinect Pressroom repeat job.
• Non-automated presses and presses from other Manager.
manufacturers

Analyze Point provides a rapid and easily understandable The long-term productivity analyses are shown with the help of
overview on how the individual operations progressed. OEE indicators.

2 3 4
Perfect flow of information and data • Prinect Press- Additionally, Prinect Pressroom Manager is able to write Precise job evaluation with Prinect The productivity evaluations are rounded off with a
room Manager controls every production step centrally to the Job Memory Card and USB stick storage media. Analyze Point performance comparison. They enable an in-depth
and manages the production data required. Job and This means that ink presetting data can be generated Easy-to-read and up-to-date status display insight into makeready times or production run
product information can therefore be retrieved rapidly for all Heidelberg presses with remote inking. Prinect Analyze Point continuously displays the speeds over a specific period of time or an individu-
and simply where it is needed: by the print shop current status of all on-going print jobs. Data such ally selected group of printing presses. Prinect Ana-
manager, the job administrator or directly at the control Connecting non-automated printing presses as printing speed, job information and sheet counter lyze Point generates a protocol of the results that
panel of the press. Non-automated presses can be incorporated into an numbers on waste sheets, good sheets and the makes production transparent. This enables the
efficient pressroom management system via a Data remaining print run can be called up. This makes effects of any implemented changes to be monitored
All job data at a glance • All the information on the Terminal, as can also machines from other manufac- for lean coordination processes with little organiza- and evaluated over a long period of time.
print job, such as customer data, print runs, inks and turers. Prinect Pressroom Manager then sends all its tional effort.
paper, as well as scheduled processes or processes job data to the relevant Data Terminal in the form of With the Prinect Performance Benchmarking option
that have already been carried out, are shown in detail job lists. Up-to-date machine data are entered manu- Comprehensive job evaluation • To respond fast for the press control console, the comparison of your
at every Prinect Cockpit workstation. Once a process ally and forwarded by Data Terminal directly to Prinect and flexibly to changes, the whole production work- own print shop productivity can be further enhanced
step has been started, all the machine data and status Pressroom Manager - time-saving data collection in flow needs to be analyzed regularly. Prinect Analyze by anonymous comparison with machines in other
information are reported back to Prinect Pressroom just a few steps. Point rapidly provides a user-friendly overview of the companies.
Manager in real time and are simultaneously available work performed during individual shifts and shows
at every connected workstation and in the MIS. All Making work easier for the printer how much time was needed for particular jobs. From Status information even on the go • The application
those involved are therefore always kept completely Prinect Pressroom Manager makes manual tasks, such the individual machine evaluations to an analysis of for smartphones and tablet PCs – Prinect Mobile –
up to date. as writing daily time sheets or palette notes, a thing the previous 15,000 jobs, all results are displayed in provides valuable information for print shop and
of the past. The palette note printout containing the clear graphics and tables. Deviations, delays or departmental managers as well as the sales force to
Central master data administration • Master job essential information on the job and production can Prinect Scheduler provides a complete overview of the planning increases in waste can be precisely localized. support decisions and scheduling. Prinect Mobile
status of all outstanding print jobs.
data on the customer, types of paper, inks and press be started directly at the printing press control console. Potential for optimization or savings can be identi- enables a view of current production processes, even
parameters are collected once and saved centrally in This not only makes the printer’s work easier, pallets fied and utilized more efficiently. Additionally, Pri- when you are out of the company. Depending on the
Prinect Pressroom Manager. This avoids multiple data for downstream production stages can also be much nect Analyze Point evaluates the job’s color quality configuration of the Prinect workflow system, the
entry, saving time and minimizing errors. more reliably identified, eliminating any unnecessary Reducing makeready times Automatic setup of Prinect Image Control data, so that the course of the printing quality can scheduling of pending jobs can be viewed in addition
checking or searching. Reliable color presetting • Prinect Pressroom Manager Prinect Pressroom Manager communicates directly be shown accurately and clearly. These quality to the current status of machines, shifts and jobs.
Connecting printing presses • The printer receives uses PPF data from the digital prepress department to with Prinect Image Control. According to the prepress reports are available from Prinect Image Control,
a list containing the work processes and production automatically preset printing presses. These PPF data data, print control strips, Mini Spots and controllable Prinect Inpress Control and Prinect Axis Control.
data he needs directly at the control panel of the press. are converted into area coverage values for each ink solid areas in the print image are recognized com-
Prinect Pressroom Manager supplies e. g. preview zone and the default settings are forwarded to the press pletely automatically. This facilitates the makeready Productivity evaluations and performance com-
images and data for paper, format and ink. This not control console for calculation of the ink zone open- process decisively and speeds it up significantly. parisons • With the help of the OEE figures describ-
only saves considerable time, but also significantly ings. Further parameters, such as paper and ink data ing the efficiency of the overall system according to
minimizes input errors. for automatic selection of the characteristic curves Efficient working with repeat jobs • Prinect indicators of time, speed and quality, the changing
are also forwarded to the control console. Makeready Pressroom Manager stores all the important setup productivity of a printing press can be monitored
The following machines can be integrated into times and waste are reduced substantially and inking- data for the press. This ensures highly efficient over longer periods of time.
the workflow: up of the press is much faster. It is usually possible to handling of repeat jobs, because production can be
• Speedmaster models with Prinect Press Center and save at least one pull per job. The tried and proven carried out using exactly the same presetting data.
Press Center Compact Prinect Prepress Interface presetting functions have This saves on average eight to ten minutes per
• Speedmaster models with Prinect CP2000 Center been systematically integrated into Prinect Pressroom repeat job.
• Non-automated presses and presses from other Manager.
manufacturers

Analyze Point provides a rapid and easily understandable The long-term productivity analyses are shown with the help of
overview on how the individual operations progressed. OEE indicators.

2 3 4
Perfect flow of information and data • Prinect Press- Additionally, Prinect Pressroom Manager is able to write Precise job evaluation with Prinect The productivity evaluations are rounded off with a
room Manager controls every production step centrally to the Job Memory Card and USB stick storage media. Analyze Point performance comparison. They enable an in-depth
and manages the production data required. Job and This means that ink presetting data can be generated Easy-to-read and up-to-date status display insight into makeready times or production run
product information can therefore be retrieved rapidly for all Heidelberg presses with remote inking. Prinect Analyze Point continuously displays the speeds over a specific period of time or an individu-
and simply where it is needed: by the print shop current status of all on-going print jobs. Data such ally selected group of printing presses. Prinect Ana-
manager, the job administrator or directly at the control Connecting non-automated printing presses as printing speed, job information and sheet counter lyze Point generates a protocol of the results that
panel of the press. Non-automated presses can be incorporated into an numbers on waste sheets, good sheets and the makes production transparent. This enables the
efficient pressroom management system via a Data remaining print run can be called up. This makes effects of any implemented changes to be monitored
All job data at a glance • All the information on the Terminal, as can also machines from other manufac- for lean coordination processes with little organiza- and evaluated over a long period of time.
print job, such as customer data, print runs, inks and turers. Prinect Pressroom Manager then sends all its tional effort.
paper, as well as scheduled processes or processes job data to the relevant Data Terminal in the form of With the Prinect Performance Benchmarking option
that have already been carried out, are shown in detail job lists. Up-to-date machine data are entered manu- Comprehensive job evaluation • To respond fast for the press control console, the comparison of your
at every Prinect Cockpit workstation. Once a process ally and forwarded by Data Terminal directly to Prinect and flexibly to changes, the whole production work- own print shop productivity can be further enhanced
step has been started, all the machine data and status Pressroom Manager - time-saving data collection in flow needs to be analyzed regularly. Prinect Analyze by anonymous comparison with machines in other
information are reported back to Prinect Pressroom just a few steps. Point rapidly provides a user-friendly overview of the companies.
Manager in real time and are simultaneously available work performed during individual shifts and shows
at every connected workstation and in the MIS. All Making work easier for the printer how much time was needed for particular jobs. From Status information even on the go • The application
those involved are therefore always kept completely Prinect Pressroom Manager makes manual tasks, such the individual machine evaluations to an analysis of for smartphones and tablet PCs – Prinect Mobile –
up to date. as writing daily time sheets or palette notes, a thing the previous 15,000 jobs, all results are displayed in provides valuable information for print shop and
of the past. The palette note printout containing the clear graphics and tables. Deviations, delays or departmental managers as well as the sales force to
Central master data administration • Master job essential information on the job and production can Prinect Scheduler provides a complete overview of the planning increases in waste can be precisely localized. support decisions and scheduling. Prinect Mobile
status of all outstanding print jobs.
data on the customer, types of paper, inks and press be started directly at the printing press control console. Potential for optimization or savings can be identi- enables a view of current production processes, even
parameters are collected once and saved centrally in This not only makes the printer’s work easier, pallets fied and utilized more efficiently. Additionally, Pri- when you are out of the company. Depending on the
Prinect Pressroom Manager. This avoids multiple data for downstream production stages can also be much nect Analyze Point evaluates the job’s color quality configuration of the Prinect workflow system, the
entry, saving time and minimizing errors. more reliably identified, eliminating any unnecessary Reducing makeready times Automatic setup of Prinect Image Control data, so that the course of the printing quality can scheduling of pending jobs can be viewed in addition
checking or searching. Reliable color presetting • Prinect Pressroom Manager Prinect Pressroom Manager communicates directly be shown accurately and clearly. These quality to the current status of machines, shifts and jobs.
Connecting printing presses • The printer receives uses PPF data from the digital prepress department to with Prinect Image Control. According to the prepress reports are available from Prinect Image Control,
a list containing the work processes and production automatically preset printing presses. These PPF data data, print control strips, Mini Spots and controllable Prinect Inpress Control and Prinect Axis Control.
data he needs directly at the control panel of the press. are converted into area coverage values for each ink solid areas in the print image are recognized com-
Prinect Pressroom Manager supplies e. g. preview zone and the default settings are forwarded to the press pletely automatically. This facilitates the makeready Productivity evaluations and performance com-
images and data for paper, format and ink. This not control console for calculation of the ink zone open- process decisively and speeds it up significantly. parisons • With the help of the OEE figures describ-
only saves considerable time, but also significantly ings. Further parameters, such as paper and ink data ing the efficiency of the overall system according to
minimizes input errors. for automatic selection of the characteristic curves Efficient working with repeat jobs • Prinect indicators of time, speed and quality, the changing
are also forwarded to the control console. Makeready Pressroom Manager stores all the important setup productivity of a printing press can be monitored
The following machines can be integrated into times and waste are reduced substantially and inking- data for the press. This ensures highly efficient over longer periods of time.
the workflow: up of the press is much faster. It is usually possible to handling of repeat jobs, because production can be
• Speedmaster models with Prinect Press Center and save at least one pull per job. The tried and proven carried out using exactly the same presetting data.
Press Center Compact Prinect Prepress Interface presetting functions have This saves on average eight to ten minutes per
• Speedmaster models with Prinect CP2000 Center been systematically integrated into Prinect Pressroom repeat job.
• Non-automated presses and presses from other Manager.
manufacturers

Analyze Point provides a rapid and easily understandable The long-term productivity analyses are shown with the help of
overview on how the individual operations progressed. OEE indicators.

2 3 4
 Trademarks
From Prinect Pressroom Manager to the With Prinect Integration Manager, Prinect Pressroom Publishing Information Heidelberg, the Heidelberg logotype, Prinect, Mini Spots, Prinect Press

00.993.3663/02 en
Printed in: 03/12 Center, Prinect Pressroom Manager, Printmaster and Speedmaster
complete Prinect Workflow Manager can be extended to a complete Prinect Photographs: Heidelberger Druckmaschinen AG are registered trademarks of Heidelberger Druckmaschinen AG in the
Platemaking: Suprasetter U.S. and other countries. All other trademarks are property of their
Prinect is the modular and scaleable print shop workflow. Modules as Prinect Prepress Manager or Printing: Speedmaster respective owners.
Finishing: Stahlfolder, Stitchmaster
workflow from Heidelberg. It can be flexibly adapted Prinect Postpress Manager, as well as Prinect Consumables: Saphira Subject to technical modifications and other changes.
Fonts: HeidelbergGothicMl
to the individual requirements of every company. A Scheduler expand the possibilities to plan dead- Printed in Germany

prerequisite for the use of Prinect Pressroom Manager lines and to track a job across all departments.
is PPF data from a prepress workflow in its lowest Using this digital planning board, sudden changes
configuration. can be carried out immediately and made visible
to everyone involved.
The complete scope of functions is available only
when there is an additional JDF connection to an Prinect optimizes and automates workflows, making
MIS (Management Information System). Prinect them straightforward and transparent, based on an
Heidelberger Druckmaschinen AG
Pressroom Manager combines the JDF job tickets open data standard – the central JDF document – Kurfuersten-Anlage 52–60
generated by an MIS with the PPF data from pre- that stores all the information about a particular job. 69115 Heidelberg Prinect
press. In the next stages of the workflow, it controls Prinect therefore plays a key role in optimizing coor- Germany
the automated data flow, so the operations involved dination processes and increasing throughput while
Phone +49 6221 92-00
Fax +49 6221 92-6999
www.fsc.org
FSC ® C008807

The mark of
Pressroom Manager
in a job, including all the relevant information, are maintaining consistently high quality. www.heidelberg.com
responsible
forestry

available at the assigned press in their precise

sequence in good time ready for processing.

The completely JDF-based pressroom workflow

facilitates the exchange of data and information
between administration and production. All job data
collected by the MIS are transferred online via
Prinect Integration Manager and no longer need to
be entered again in the production department.
This makes job preparation faster and more reliable.

Management Information System (MIS)

JDF-/JMF-interface

Prinect Integration Manager

PPF
Prepress Prinect Pressroom Manager

The information and control for the pressroom in makeready times and waste at the press. The production
Full integration of every process stage gives print shops a data of the connected presses and color measurement systems
Color Measurement decisive competitive advantage. Prinect® Pressroom Manager are evaluated in Analyze Point. Informative reports supply
Presses
Systems communicates information intelligently so that print jobs are values on performance and productivity as well as information
automatically available at the right press at the right time. about jobs and their quality. With the application Prinect
This automation ensures substantially increased productivity Mobile you can access your print shop on your smartphone.
and more transparency in the pressroom. Thanks to the effi- Thus, Prinect Pressroom Manager makes it possible to react
Prinect Pressroom Manager centrally controls all communications cient use of presetting data, there is a considerable reduction rapidly, directly and flexibly to changing requirements.
in the pressroom.

5
 Trademarks
From Prinect Pressroom Manager to the With Prinect Integration Manager, Prinect Pressroom Publishing Information Heidelberg, the Heidelberg logotype, Prinect, Mini Spots, Prinect Press

00.993.3663/02 en
Printed in: 03/12 Center, Prinect Pressroom Manager, Printmaster and Speedmaster
complete Prinect Workflow Manager can be extended to a complete Prinect Photographs: Heidelberger Druckmaschinen AG are registered trademarks of Heidelberger Druckmaschinen AG in the
Platemaking: Suprasetter U.S. and other countries. All other trademarks are property of their
Prinect is the modular and scaleable print shop workflow. Modules as Prinect Prepress Manager or Printing: Speedmaster respective owners.
Finishing: Stahlfolder, Stitchmaster
workflow from Heidelberg. It can be flexibly adapted Prinect Postpress Manager, as well as Prinect Consumables: Saphira Subject to technical modifications and other changes.
Fonts: HeidelbergGothicMl
to the individual requirements of every company. A Scheduler expand the possibilities to plan dead- Printed in Germany

prerequisite for the use of Prinect Pressroom Manager lines and to track a job across all departments.
is PPF data from a prepress workflow in its lowest Using this digital planning board, sudden changes
configuration. can be carried out immediately and made visible
to everyone involved.
The complete scope of functions is available only
when there is an additional JDF connection to an Prinect optimizes and automates workflows, making
MIS (Management Information System). Prinect them straightforward and transparent, based on an
Heidelberger Druckmaschinen AG
Pressroom Manager combines the JDF job tickets open data standard – the central JDF document – Kurfuersten-Anlage 52–60
generated by an MIS with the PPF data from pre- that stores all the information about a particular job. 69115 Heidelberg Prinect
press. In the next stages of the workflow, it controls Prinect therefore plays a key role in optimizing coor- Germany
the automated data flow, so the operations involved dination processes and increasing throughput while
Phone +49 6221 92-00
Fax +49 6221 92-6999
www.fsc.org
FSC ® C008807

The mark of
Pressroom Manager
in a job, including all the relevant information, are maintaining consistently high quality. www.heidelberg.com
responsible
forestry

available at the assigned press in their precise

sequence in good time ready for processing.

The completely JDF-based pressroom workflow

facilitates the exchange of data and information
between administration and production. All job data
collected by the MIS are transferred online via
Prinect Integration Manager and no longer need to
be entered again in the production department.
This makes job preparation faster and more reliable.

Management Information System (MIS)

JDF-/JMF-interface

Prinect Integration Manager

PPF
Prepress Prinect Pressroom Manager

The information and control for the pressroom in makeready times and waste at the press. The production
Full integration of every process stage gives print shops a data of the connected presses and color measurement systems
Color Measurement decisive competitive advantage. Prinect® Pressroom Manager are evaluated in Analyze Point. Informative reports supply
Presses
Systems communicates information intelligently so that print jobs are values on performance and productivity as well as information
automatically available at the right press at the right time. about jobs and their quality. With the application Prinect
This automation ensures substantially increased productivity Mobile you can access your print shop on your smartphone.
and more transparency in the pressroom. Thanks to the effi- Thus, Prinect Pressroom Manager makes it possible to react
Prinect Pressroom Manager centrally controls all communications cient use of presetting data, there is a considerable reduction rapidly, directly and flexibly to changing requirements.
in the pressroom.