SILICONE OIL 350
Description
Lubrisolve Silicone Oil 350 is a clear, non-toxic, inert and odourless straight chained
polydimethylsiloxane fluid with a multitude of uses. It has a wide operational
temperature range as well as a low viscosity change with temperature fluctuations.
Lubrisolve Silicone Oil 350 has a high compressibility, is non-corrosive, chemically inert to
most materials, possesses excellent thermal stability and demonstrates high shear
stability.
Additionally, Lubrisolve Silicone Oil 350 has a very low order of toxicity, and if handled
with reasonable care will present negligible skin irritation problems.
Application
Lubrisolve Silicone Oil 350 has many uses throughout industry and beyond. Such
examples, where Lubrisolve Silicone Oil 350 can be used as a lubricant, are in a variety of
fitness equipment, such as treadmills, weight training equipment, and cross trainers, for
example, as well as for linkages and sliding surfaces often found in specific small radio and
remote control model cars, tanks, boats, and even drones. A few drops will make a
significant impact on the smooth running of these items.
Lubrisolve Silicone Oil 350 is commonly used for the lubrication of elastomers and plastics,
often during assembly, but also throughout operation of assembled components.
Lubrisolve Silicone Oil 350 can also be used as an ingredient for many other applications
such as in water repellent compounds, di-electric fluid blends, and in the formulation for
release agents and polishes.
There are many other uses for Lubrisolve Silicone Oil 350, too numerous to mention, but
particularly in the field of lubrication where a small amount drastically reduces friction
and, of course more critically, improves the operational performance and reduces wear.
Lubrisolve Engineering Solutions Ltd
Units 1 - 3 Downslade Business Units, Downslade Lane, Upton, Long Sutton, Somerset TA10 9NY
Telephone: +44(0)1458-241241 E-mail:
[email protected] Technical Data
Appearance Clear and colourless
Viscosity @ 250C (cSt) 350
Specific Gravity @ 250C 0.970
Flash Point – PMCC (0C) 315
Freezing Point – approx. (0C) -50
Pour Point (0C) -65
Refractive Index @ 250C 1.403
Surface Tension @ 250C (dynes/cm) 21.10
Vapour Pressure @ 2000C (Pa) 1.33
Volume Expansion Coefficient – approx. (between 9.45. 104
250C and 1000C)
Specific Heat Capacity (between 400C and 1000C 1.46
(J/g))
Thermal Conductivity – approx. (W/m0C) 0.16
Viscosity/Temperature Coefficient – approx. 0.62
Dielectric Strength @ 250C – approx. (kV/mm) 16.00
Dielectric Constant @ 250C (between 0.5 and
2.80
100kHz)
Power Factor @ 250C @ 100kHz – approx. 1.10-4
Permittivity @ 250C – approx. (W.cm) 1.1015
The content of this data sheet is given in good faith and without warranty.
Lubrisolve Engineering Solutions Ltd makes the limited warranty that at the date of delivery this product will be free from defects in
materials and workmanship.
No warranty of merchantability, fitness for any use, or any other warranty is expressed or to be implied, regarding the accuracy of this
data. The results to be obtained from the use thereof, or the hazards connected with the use of this product.
Lubrisolve Engineering Solutions Ltd. assumes no liability for any alleged ineffectiveness of the product or any injury or damage, direct
or consequential, resulting from the use of this product unless such injury or damage is solely attributable to negligence on the part of
Lubrisolve Engineering Solutions Ltd.
Issue 23.02.20
Lubrisolve Engineering Solutions Ltd
Units 1 - 3 Downslade Business Units, Downslade Lane, Upton, Long Sutton, Somerset TA10 9NY
Telephone: +44(0)1458-241241 E-mail:
[email protected]
