March 23, 2022 Firearms
Archery Hunting DIY Giveaways Videos News
Home DIY How to Mount an AR Scope the Right Way
How to Mount an AR Scope the Right
Way
By Lou Patrick
With many shooters setting their ARs to long-range tasks, precision scope
mounting becomes increasingly important
by Lou Patrick
There are many factors that influence a shooter’s ability to consistently shoot small groups or to engage
targets at varying ranges. One of these factors is cant error. For the shooter with a telescopic sight moun
on their rifle, there are two possible sources of cant error.
The first is shooter-induced cant, which is generally defined as tilting the rifle to one side relative to its
orientation when zero’d. The second is cant error, introduced by an improperly mounted scope. The two
sources of cant error tend to compound one another because an improperly mounted scope will general
Firearms Archery Hunting DIY Giveaways Videos News
cause the shooter to hold the rifle so that the reticle appears to be square when, in fact, it isn’t, inducing
even more cant.
Why is eliminating cant important? For a scoped rifle to function properly, the vertical stadia of the reticle
must be perpendicular to the Earth’s surface, with the rifle being held such that the scope and rifle are in
same vertical plane. In other words, the rifle should be directly beneath scope.
Once fired, the bullet will rise, intersecting the line of sight, and continue to rise until it reaches the apex o
its trajectory before beginning its downward path, intersecting the line of sight a second time.
Now, imagine that the rifle is canted to one side. The scope (line of sight) is still above the rifle but it’s als
the left or right of the bore. In this instance, the bullet will cross the line of sight from the left or right and
continue its now angular path (comparatively), crossing the line of sight only once. This makes it more
difficult to hit targets at varying distances because the bullet is coming into the line of sight from the righ
left and the system can only be truly “sighted in” at one specific range. If you were to make an elevation
adjustment to hit a target at, say, a distance greater than the distance at which the rifle is zero’d, a now
unexpected windage error is being introduced because of cant. A rifle canted to the right will cause bullet
impact to be low and right; cant to the left and the bullet strike will be low and left.
Given the nature of shooting in the field, often with ad hoc field rests, it is understood that our rifle will no
always be held in perfect vertical alignment. There is no reason, however, to add to the error by working w
a canted scope.
To remove the variable of an improperly mounted (or canted) scope, we suggest using the Level-Right Pr
scope mounting system from Real Avid. This new tool allows you to easily install a scope onto most any ri
in perfect alignment with the bore and with the reticle’s vertical stadia perpendicular to the Earth’s surfac
It’s an ingeniously designed tool that we’ve used on a couple of rifles thus far with excellent results. Here
the process for using the Level-Right Pro on the AR platform. For this illustration, we’re installing the AR-
friendly Omnia 8 tactical rifle scope from TRUGLO onto our Rock River Arms upper receiver.
Firearms Archery Hunting DIY Giveaways Videos News
Install the scope onto the rifle to establish the proper scope mounting position and scope eye relief. Appl
piece of masking tape onto the scope tube where it intersects one of the scope rings. The will allow the sc
to be mounted and secured in the proper location on the bench. Once the correct position is established,
remove the scope and mount assembly from the receiver.
Next, separate the upper and lower receivers, removing the bolt carrier group and charging handle, and
place the upper receiver assembly in a padded bench vice. Use bubble levels to ensure the handguard an
receiver Picatinny rails are level with each other, and level the upper receiver assembly in the vice.
Firearms Archery Hunting DIY Giveaways Videos News
Reinstall the scope and mount assembly into the established position and then remove the scope ring ca
screws followed by the scope.
Clean the ring cap screws and the inside of the scope rings with denatured alcohol to remove any oils. Ap
a thin coat of powdered rosin to the scope rings. This rosin can help secure the scope in the ring caps afte
final assembly and provide a controllable, “friction slip” surface when rotating the scope for vertical
Firearms Archery Hunting DIY Giveaways Videos News
alignment.
Place the scope into the rings, using the masking tape as a reference for the scope position. Lightly instal
ring cap screws. The scope should be loose enough to be rotated yet secure enough to stay in position w
released.
Firearms Archery Hunting DIY Giveaways Videos News
Follow the provided Level-Right Pro instructions for proper tool setup. Next, attach the Level-Right Pro to
handguard Picatinny rail and slide it into position in front of the objective lens. The level atop the Level-Ri
Pro should confirm the previously established level of the upper receiver.
Place the Level-Right Pro alignment grid behind the scope’s ocular lens and level the grid using the
Firearms Archery Hunting DIY Giveaways Videos News
integrated level.
Turn on the light projector and focus the reticle on the grid by turning the scope’s focus ring.
Rotate the scope so that the reticle’s vertical stadia aligns with the vertical lines on the grid. At this point,
Firearms Archery Hunting DIY Giveaways Videos News
barrel and the scope are in the correct perpendicular alignment with the Earth’s surface and there is no
inherent scope cant.
Tighten (snug) the ring cap screws while observing the grid to maintain proper scope alignment.
Remove one cap screw at a time and apply blue Loctite to the screw threads and install the screw.
Firearms Archery Hunting DIY Giveaways Videos News
Once all screws have received blue Loctite, they can be torqued to the manufacturer’s specifications. Here
we are using the Smart Torq torque driver from Real Avid. Once complete, reassemble the upper and low
receivers and verify that the proper eye relief has been maintained.
In addition to the Level-Right Pro and Smart Torq, Real Avid offers a wide variety of specialty tools for the
gun enthusiasts. Visit Real Avid to check out their tooling solutions for applications you might never have
even considered.
Share on Facebook Share on Twitter
Previous article Next a
On the Grill: Barbecue Venison Meatloaf Field Test: Matthews VXR Series Compound
LOU PATRICK
Firearms Archery Hunting DIY Giveaways Videos News
Lou is a U.S. Army veteran, graduate of Pennsylvania Gunsmith School, and is a National Institute for Metalworking
Skills certified machinist. A lifelong shooting and hunting enthusiast, he has operated his own gunsmithing business
and worked as a gunsmith for the U.S. Army Marksmanship Unit at Fort Benning, GA. Lou has co-authored several
instructional books on firearm building and is in agreement with Colonel Whelen that, “Only accurate rifles are
interesting.”
RELATED ARTICLES MORE BY LOU PATRICK MORE IN DIY
Is THIS the Ultimate Predator Quick Hit: Sig Sauer Tango-MSR 1- Turkey Ammo to Feed Your
Cartridge? 6×24 LPVO Addiction
February 28, 2022 February 17, 2022 February 9, 2022
Load More Related Articles
Firearms Archery Hunting DIY Giveaways Videos News
Firearms Archery Hunting DIY Giveaways Videos News
Firearms Archery Hunting DIY Giveaways Videos News
Firearms Archery Hunting DIY Giveaways Videos News
Firearms Archery Hunting DIY Giveaways Videos News
Firearms Archery Hunting DIY Giveaways Videos News
Firearms Archery Hunting DIY Giveaways Videos News
TIMELINE
March 23, 2022
Easton’s New-For-2022 App
Welcome to Shoot-On.com - The March 21, 2022
outdoor and shooting industry's TESTED! Springfield Armory
Emissary .45 ACP
premier source of up-to-date news,
Firearms March 18, 2022
Archery Hunting DIY Giveaways Videos News
media, entertainment and new
Defensive Shotguns…the Next Step
product information. Our mission is to
provide readers with compelling
March 17, 2022
ALPS OutdoorZ Elite Series
content that is both relevant and
Ultralight Hunting Packs
valuable to the modern
outdoorsman/shooter. Be it new March 16, 2022
tactics for hunting or customizing your The Ammo Answer? Taurus 692
firearm - we cover it all! Multi-Caliber Revolver
[email protected]
PO Box 311 Cedar Lake, IN 46303
FOLLOW US
© Copyright 2020
