H3C S12500G-AF Data

Center Intelligent Core

Switch
Release Date: August, 2021

New H3C Technologies Co., Limited

 H3C S12500G-AF Data Center Intelligent Core Switch

Overview
H3C S12500G-AF is H3C's new generation of AI intelligent switches for the core scenarios of data
centers, providing the industry's highest switching. It provides the following features:

 CLOS+ multi-grade multi-plane architecture

 High performance GPU, 100T+ floating-point computing capabilities

 Industry's first network-specific AI algorithm

The S12500G-AF series switch includes S12504G-AF, 12508G-AF and S12516G-AF, which can adapt to
the port density and performance requirements of different network scales, provide strong equipment
guarantee for data center network construction, and support INT and Seer Network.

H3C S12500G-AF Series Switch

Features
Advanced CLOS+ multi-grade multi-plane switching
architecture
 CLOS+ multi-grade multi-plane architecture, midplane free design, providing continuous
bandwidth upgrade capability , improve system bandwidth and evolution capabilities, and the
capacity of the whole machine can be smoothly expanded.

 Supports 48-port 10G, 36-port 40GE/ 100GE interfaces and can meet the existing and future
application requirements of data centers.

2
 H3C S12500G-AF Data Center Intelligent Core Switch

 Separation of control and data planes, Forwarding and control are separated, and the fabric slots
supports 5+1 or 4+2 redundancy.

 Fans and power supplies are designed with redundancy.

AI-Inside drives intelligent networks

S12500G-AF series switch support Seerblade high-performance AI computing module, provides an
intelligent computing platform that is deeply integrated with the network, and has high-performance
CPU, GPU, and large storage capacity, to meet the lightweight deployment of AI + Big Data applications
for small and medium-sized enterprises :

 Through the powerful computing power brought by high-performance GPU and high-speed
network connection, it can achieve 123TFlops of floating-point computing power, which is a million
times higher than traditional processors.

 The network-specific intelligent algorithm jointly launched by top units to improve the level of
network intelligent management and performance standards .

Comprehensive IPv6 solution

 S12500G-AF series fully supports IPv6 protocol suite, supports IPv6 static routing, RIPng, OSPFv3,
IS-ISv6, BGP4+ and other IPv6 routing protocols, and supports richIPv4 to IPv6 transition
technology, including: IPv6 manual tunnel, 6to4 tunnel, ISATAP tunnel, GRE tunnel, IPv4-compatible
automatic configuration tunnel and other tunnel technologies, guarantee the smooth transition
from IPv4 to IPv6.

Comprehensive virtualization capabilities

 IRF2 (The second generation of Intelligent Resilient Framework)

 S12500G-AF series switches support IRF2 technology, virtualizing up to 4 high-end devices into one
logical device, which has powerful advantages in reliability, distribution and ease of management.

 Reliability: Through patented hot backup technology, redundant backup of all information on the
control plane and data plane and uninterrupted data forwarding are realized in the entire virtual
architecture, which greatly enhances the reliability and high performance of the virtual architecture,
and eliminates A single point of failure is avoided and business interruption is avoided.

 Distribution: Through distributed cross-device link aggregation technology, load sharing and
mutual backup of multiple uplinks are realized, thereby improving the redundancy of the entire
network architecture and the utilization of link resources.

 Ease of management: The entire elastic architecture shares one IP management, which simplifies
network equipment management, simplifies network topology management, improves operational
efficiency, and reduces maintenance costs.
3
 H3C S12500G-AF Data Center Intelligent Core Switch

 MDC (Multitenant Devices Context）

 S12500G-AF series switches can achieve 1:N virtualization capability through MDC technology, that
is, one physical switch is virtualized into N logical switches, and up to 16 logical switches can be
virtualized to meet the needs of multiple customers sharing core switches; The ports of a single
board are divided into different MDCs, which can make full use of the capabilities of the core
switch and reduce the user's investment cost. The use of MDC technology realizes the safe
isolation of services.

 Application requirements for cloud computing data

centers
 S12500G-AF series switches support VXLAN (Virtual eXtensible LAN) technology. VXLAN is a Layer2
VPN technology based on IP network and adopting "MAC in UDP" encapsulation. VXLAN can
provide Layer2 interconnection for scattered physical sites based on existing service providers or
enterprise IP networks, and can provide business isolation for different tenants.

 S12500G-AF series switches support EVPN (Ethernet Virtual Private Network). EVPN is a Layer 2
VPN technology. The control plane uses MP-BGP to advertise EVPN routing information, and the
data plane supports the use of VXLAN encapsulation to forward packets.

 S12500G-AF series switches support the large-scale Layer 2 interconnection technology, which can
realize the large-scale Layer 2 interconnection through EVPN+VXLAN, and realize the
interconnection between multiple sites across the data center.

 S12500G-AF series switches support FCoE (FC over Ethernet) technology; FCoE technology is
mainly used to solve the heterogeneous problem of cloud computing data center LAN network
and FC storage network. It can be realized through the deployment of FCoE and CEE technology.
The integration of the front-end network and back-end network architecture of the data center
solves the technical problems of the separation of data, computing and storage, thereby greatly
reducing the cost of data center procurement and capacity expansion

 S12500G-AF series switches support large-capacity ARP/ND, MAC, and ACL entries, which can
adapt to the flat networking requirements of large data center networks.

Innovative multi-engine design

 Innovative hardware design is adopted to provide the system with powerful control capability and
50ms high reliability guarantee through independent control engine, detection engine and
maintenance engine.

 Distributed control engine, all business boards provide a powerful control processing system,
easily process various protocol messages and control messages, and support fine control of
protocol messages, providing the system with a complete ability to resist protocol message
attacks.
4
 H3C S12500G-AF Data Center Intelligent Core Switch

 Distributed detection engine, all service boards can perform distributed BFD, OAM and other fast
fault detection, and implement linkage with the control plane protocol, support fast protection
switching and fast convergence, can achieve millisecond fault detection

 Distributed maintenance engine, intelligent CPU system supports intelligent power management,
and can support sequential power-on and power-off of single boards (reduce the power impact
caused by simultaneous power-on of single boards, improve equipment life, reduce
electromagnetic radiation, and reduce system power consumption)

DC-class HA
FFDR provides BFD and OAM functions to implement fast failover and convergence. The following lists
the DC-class HA features:

 BFD for VRRP/BGP/IS-IS/RIP/OSPF/RSVP/static routing

 NSR/GR for OSFP/BGP/IS-IS/RSVP

 Separation of control and data planes through independent control engine and switching fabric
module.

 1+1 redundancy for control engines

 N+1 redundancy for switch fabric modules

 1+1 redundancy for fan trays

 N+M redundancy for power modules

HA — based on DRNI architecture

 S12500G-AF series switches support DRNI (Distributed Resilient Network Interconnect) technology,
which realizes cross-device link aggregation by virtualizing two physical devices into one device at
the forwarding level, keeping the control plane independent of each other, and realizing dual-
active access of the device. Provide equipment-level redundancy protection and traffic load
sharing, while improving the reliability of the system.

Multi-level security protection

 The S12500G-AF series switch use QoS policies to filter and limit traffic from data plane to control
plane. During a DoS attack, the switch can identify and protect important packets and discard
attack packets, ensuring normal operation

 Supports a large numbers of ACLs while ensuring line-speed forwarding. ACLs can identify and
control L2/IPv4/IPv6/MPLS traffic by using combinations of packet fields

5
 H3C S12500G-AF Data Center Intelligent Core Switch

Comprehensive maintenance and monitoring

 Online state monitoring - Uses a dedicated engine to monitor the state of switch fabric modules,
backplane channels, service communication channels, key chips, and storage. Once a failure occurs,
it reports the failure to the system through EMS

 Card isolation- Isolates specified cards from the forwarding plane. The isolated cards still work on
the control plane, allowing the user to perform management operations such as real-time
diagnosis and CPLD upgrade on the isolated cards without affecting system operation

 Ethernet OAM- Provides multiple device-level and network-level fault detection methods

Green
 Intelligent EMS engine system - Provides smart power management that supports sequential
power-on and power-off and device status check. Sequential power-on and power-off reduces
power impulse and electromagnetic radiation, and increases the lifetime of the device. Additionally,
device status checks can isolate faulty and idle cards to reduce power consumption

 Smart fan management- Collects fan temperature, calculates fan speed, and assigns the calculated
speed to the fan tray. In addition, it detects fan speeds, fault alarms, and performs speed
adjustment based on configuration sand area, reducing power consumption and noise, increasing
the fan's lifetime

 Internal interface monitoring-Automatically shuts down unused internal interfaces to reduce power
consumption

Hardware Specifications
Item S12504G-AF S12508G-AF S12516G-AF

CPU cores 4 4 4

CPU main 2.2GHz 2.2GHz 2.2GHz

frequency

Buffer 32M 32M 32M

Switching 57.6T/387Tbps 115.2T/516Tbps 230.4T/1032Tbps

capacity

Throughput 21600Mpps 43200Mpps 86400Mpps

MPU slots 2 2 2

6
 H3C S12500G-AF Data Center Intelligent Core Switch

LPU slots 4 8 16

Maximum 5800 W 12000 W 22400W

power
consumption

Weight (full ≤ 110 kg ≤ 190 kg ≤ 352 kg

configuration) ≤ 242.5 lb ≤ 418.9 lb ≤ 776 lb

Dimensions (H 264 x 440 x 857 mm (6U) 531 x 440 x 857 mm (12U) 931 x 440 x 857 mm (21U)
x W x D) 10.4 x 17.3 x 33.7 in 20.9 x 17.3 x 33.7 in 36.7 x 17.3 x 33.7 in

Switching 6 6 6
fabric module
slots

MPU Name LSXM1SUP04T2 LSXM2SUPT2

MPU processor Quad Core 2.2GHz Quad Core 2.2GHz

MPU SDRAM 16 GB 16 GB

MPU Flash 8 GB 4 GB

MPU Console 1 1
Port

MPU MGMT 2 2
Ports

MPU USB Port 1 1

Redundancy Redundant MPUs, switching fabric modules, power modules, and fan trays

Software Specifications
Ethernet IEEE 802.1Q

DLDP

LLDP

Static MAC configuration

Limited MAC learning

Port mirroring and traffic mirroring

Port aggregation, port isolation, and port mirroring

7
 H3C S12500G-AF Data Center Intelligent Core Switch

IEEE 802.1D (STP)/802.1w (RSTP)/802.1s (MSTP)

IEEE 802.3ad (dynamic link aggregation), static port aggregation, and multi-chassis link
aggregation

IPv4 Static routing, RIP, OSPF, IS-IS, and BGP4

ECMP

Policy-based routing

Routing policy

IPv6 IPv4/IPv6 dual stack

IPv6 static routing, RIPng, OSPFv3, IS-ISv6, and BGP4+

VRRPv3 and VRRPv3 load balancing

Pingv6, Telnetv6, FTPv6, TFTPv6, DNSv6, and ICMPv6

IPv4-to-IPv6 transition technologies, such as IPv6 manual tunnel, 6to4 tunnel, ISATAP
tunnel, GRE tunnel, and auto IPv4-compatible IPv6 tunnel

ECMP

Policy-based routing

Routing Policy

IP message fragmentation and reassembly

Multicast PIM-DM, PIM-SM, PIM-SSM, MSDP, MBGP, and Any-RP

IGMP V1/V2/V3 and IGMP V1/V2/V3 snooping

PIM6-DM, PIM6-SM, and PIM6-SSM

MLD V1/V2 and MLD V1/V2 snooping

Multicast policies and Multicast QoS

MPLS/VPLS Support L3 MPLS VPN

Support L2 VPN: VLL (Martini, Kompella)

Support MCE

Support MPLS OAM

Support VPLS, VLL

Support hierarchical VPLS and QinQ+VPLS access

Support P/PE function

Support LDP protocol

ACLs Standard and extended ACLs

Ingress and egress ACLs

8
 H3C S12500G-AF Data Center Intelligent Core Switch

VLAN ACLs

Global ACLs

QoS Diff-Serv QoS

SP/WRR/SP+WRR

Traffic policing

Traffic shaping

Congestion avoidance

Priority marking and remarking

802.1p, TOS, DSCP, and EXP priority mapping

LLDP LLDP

LACP LACP

Programmable Support Ansible automation technology

and Automated Support automated network orchestration through Python/NETCONF/TCL/Resful API to

realize DevOps automated operation and maintenance

SDN/OPENFLOW Support OPENFLOW 1.3 standard

Support multi-controller (EQUAL mode, standby mode)

Support multi-table line

Support Group table

Support Meter

Lossless network Support RDMA, PFC, ECN and other lossless Ethernet features

VXLAN VXLAN L2 switching

VXLAN L3 routing

IS-IS+ENDP distributed control plane

OpenFlow+Netconf centralized control plane

VxLAN/RoCE over VxLAN/BGP EVPN

HA Independent switching fabric modules

1+1 redundancy or key components such as MPUs and power modules

N+1 redundancy for switching fabric modules

Passive backplane

CLOS+ midplane free design

Hot swapping for all components

9
 H3C S12500G-AF Data Center Intelligent Core Switch

Real-time data backup on active/standby MPUs

Hot patching

NSR/GR for OSFP/BGP/IS-IS/RSVP

Port aggregation and multi-card link aggregation

BFD for VRRP/BGP/IS-IS/OSPF/RSVP/static routing, with a failover time less than 10

milliseconds

RRPP

DLDP

VCT

Smart-Link

Micro-Segmentation

Security Support EAD security solutions

Support Portal authentication

Support MAC authentication

Support IEEE 802.1x and IEEE 802.1x SERVER

Support AAA/Radius

Support HWTACACS, support command line authentication

Support SSHv1.5/SSHv2

Support ACL flow filtering mechanism

Supports plain text and MD5 cipher text authentication of OSPF, RIPv2 and BGPv4
messages

Support the command line with hierarchical protection to prevent unauthorized users
from intruding illegally, and have different configuration permissions for users of
different levels

Support DDos, ARP attack and ICMP attack function

Telnet login and password mechanism supporting restricted IP address

Support multiple combinations of IP address, VLAN ID, MAC address and port binding

Support uRPF

Support main and backup data backup mechanism

Support fault alarm and automatic fault recovery

Support system log

System Support FTP, TFTP, Xmodem

management Support SNMP v1/v2/v3

10
 H3C S12500G-AF Data Center Intelligent Core Switch

Support sFlow traffic statistics

Support RMON

Support NTP clock, support SNTP

Support NetStream traffic statistics function

Support gRPC

Support Telemetry traffic visualization function

Temperature Operating temperature: 0°C to 40°C (32°F to 104°F)

Storage temperature: -40°C to 70°C (-40°F to 158°F)

Humidity 5% to 95% (non-condensing)

Green Support 802.3az energy efficient Ethernet

Safety UL 60950-1

CAN/CSA C22.2 No 60950-1

IEC 60950-1

EN 60950-1

AS/NZS 60950-1

FDA 21 CFR Subchapter J

GB 4943.1

EMC FCC Part 15 (CFR 47) CLASS A

ICES-003 CLASS A

VCCI CISPR 32 CLASS A

CISPR 22 CLASS A

EN 55022 CLASS A

AS/NZS CISPR22 CLASS A

CISPR 32 CLASS A

EN 55032 CLASS A

AS/NZS CISPR32 CLASS A

CISPR 24

EN 55024

EN 61000-3-2

EN 61000-3-3

ETSI EN 300 386

11
 H3C S12500G-AF Data Center Intelligent Core Switch

Dynamic ARP 136K max

table

MAC address 288K max

table

IPV4 routing 360267

table

IPV6 routing 144179

table

IEEE Standard 802.3/802.3ad/802.3ah/802.1p/802.1Q/802.1d/802.1w/802.1s/802.1ak/802.1ag

802.1X/802.1Qbb/802.1Qaz/802.1Qau

Ordering information
Product ID Product Description
LS-12504G-AF H3C S12504G-AF Ethernet Switch Host
LS-12508G-AF H3C S12508G-AF Ethernet Switch Host
LS-12516G-AF H3C S12516G-AF Ethernet Switch Host
LSXM1SUP04T2 H3C S12504G-AF Supervisor Engine Module
LSXM2SUPT2 H3C S12500G-AF Supervisor Engine Module
LSXM1SFT04F2 H3C S12504G-AF Fabric Module, Type T(Class F)
LSXM1SFT08F2 H3C S12508G-AF Fabric Module, Type T(Class F)
LSXM1SFT16F2 H3C S12516G-AF Fabric Module, Type H(Class F)
H3C S12500 18-PORT 100GBASE Ethernet Optical
LSXM1CGQ18TD2
Interface(QSFP28)(TD)
H3C S12500 36-Port 40GBASE Ethernet Optical Interface
LSXM1QGS36TD2
Module(QSFP+)(TD)
H3C S12500 48-Port 10GBASE Ethernet Optical Interface
LSXM1TGS48TD2
Module(SFP+,LC)(TD)
H3C S12500 36-Port 100GBASE Ethernet Optical Interface
LSXM1CGQ36TE2
Module(QSFP28)(TE)
LSXM1BFP16A 16 Fabric Blank Filler Panel
LSXM1BFP08A 08 Fabric Blank Filler Panel
LSXM1BFP04A 04 Fabric Blank Filler Panel
LSXM116XFAN H3C S12516X-AF Ethernet Switch Fan Module
LSXM108XFAN H3C S12508X-AF Ethernet Switch Fan Module
LSXM104XFAN H3C S12504X-AF Ethernet Switch Fan Module

12
 H3C S12500G-AF Data Center Intelligent Core Switch

LSXM116XFANH H3C S12516X-AF Ethernet Switch High Speed Fan Module

LSXM108XFANH H3C S12508X-AF Ethernet Switch High Speed Fan Module
LSXM104XFANH H3C S12504X-AF Ethernet Switch High Power Fan Module
PSR2400-54A AC Power Module,2400W
PSR2400-54D DC Power Module,2400W
PSR3000-54A 3000W AC Power Supply Module
PSR3000-54AHD 3000W AC & 240V-380V HVDC Power Supply

Copyright © 2021 New H3C Technologies Co., Limited Reserves all rights
New H3C Technologies Co., Limited
Disclaimer: Though H3C strives to provide accurate information in this document, we cannot guarantee that details do not
Beijing Headquarters
contain any technical error or printing error. Therefore, H3C cannot accept responsibility for any inaccuracy in this document.
Tower 1, LSH Center, 8 Guangshun South Street, Chaoyang
H3C reserves the right for the modification of the contents herein without prior notification
District, Beijing, China

Zip: 100102

Hangzhou Headquarters
http://www.h3c.com

No.466 Changhe Road, Binjiang District, Hangzhou, Zhejiang,

China

Zip: 310052

Tel: +86-571-86760000

Fax: +86-571-86760001

13