R
® and
Lubricant Filters and Strainers
Product Specs and Ordering
Bulletin 15200
(Replaces Bulletins 15201, 15206, 15210 & 15216)
Lubricant Filters
and Strainers
15200
© LUBRIQUIP, INC., A Unit of IDEX Corporation 1986. All Rights Reserved.
IDEX CORPORATION
Lubricant Filters and Strainers 15200
HIGH - PRESSURE IN-LINE OIL FILTERS
DESCRIPTION
The Lubriquip High Pressure Line Filter is designed for
hydraulic or oil lubrication systems with pressures up to
7,500 psi (510 bar). It removes particles from systems
larger than 10 or 25 microns and reduces downtime for
a system due to inadequate filtering or contaminated
lubricant.
FEATURE/BENEFITS
■ Replaceable filter assembly.
■ Simple and compact in design.
■ Easy to install on any new or existing system.
■ Filter assembly can be changed without disturbing
piping or tubing.
■ Filter is permanently mounted to end plug, ensuring
system operation only with filter element installed in
line. ORDERING INFORMATION
■ Integral air-bleed port for installation and mainte- FILTER ASSEMBLY WITH 10 MICRON FILTER ELEMENT
nance convenience.
■ 1/4-18 N.P.T.F. Inlets/Outlets: 527-100-581
■ Alternative inlet and outlet ports for piping conve- (Filtration Ratios: β10 = 7; β25 = 390)
nience.
■ 9/16-18 SAE O-Ring Inlets/Outlets: 527-100-780
OPERATION (Filtration Ratios: β10 = 7; β25 = 390)
Install the filter in the output line of the pump to provide ■ 1/4-19 BSPP Inlets/Outlets: 527-101-120
filtration of the oil entering the system. The oil passes (Filtration Ratios: β10 = 7; β25 = 390)
through the filter assembly from the inlet port to the ■ 14 mm x 1.5 (ISO 6149): 527-101-223
outlet port. Recommended mounting position is with (Filtration Ratios: β10 = 7; β25 = 390)
the bleed port on top. See outline drawing with mount-
ing dimensions on page 14. FILTER ASSEMBLIES WITH 25 MICRON FILTER ELEMENT
This filter is designed to allow contaminated filter ■ 1/4-18 N.P.T.F. Inlets/Outlets: 527-100-591
elements to be changed without removing existing (Filtration Ratios: β25 = 4; β50 = 138)
piping or tubing. Simply remove the used filter assem-
bly and replace with a new clean assembly. Refer to ■ 9/16-18 SAE O-Ring Inlets/Outlets: 527-100-790
the drawing on page 14. (Filtration Ratios: β25 = 4; β50 = 138)
NOTE: Do not attempt to replace filter assembly with ■ 1/4-19 BSPP Inlets/Outlets: 527-100-830
any residual pressure in system. (Filtration Ratios: β25 = 4; β50 = 138)
■ 14 mm x 1.5 (ISO 6149): 527-101-224
SPECIFICATIONS (Filtration Ratios: β25 = 4; β50 = 138)
Material (Body) .............................................................. Steel ■ 14 mm x 1.5 (ISO 6149), 40 Micron: 527-101-225
Filter Rating
(Nominal Filtration) ................................. 10 or 25 microns ■ 14 mm x 1.5 (ISO 6149), 90 Micron: 527-101-226
Maximum Pressure ............................... 7,500 psi (510 bar)
Net Weight ......................................... Approx. 3 lbs. (1.4 kg)
Page 14
Lubricant Filters and Strainers 15200
DIMENSIONS Inches (mm)
1.000
(25.40) LUBE 1.562 .219
OUT PORT (39.67) (5.56)
A
9/32 Mounting
Hole (2) (7.14)
(47.63)
1.875
LUBE
OUT ALT. OUT
(81.76)
3.219
(95.25)
3.750
LUBRIQUIP, INC.
(69.85)
2.750
A UNIT OF IDEX CORPORATION
CENTRALIZED LUBRICATION SYSTEMS ALT. IN
(69.85)
2.750
ASSYNO.
SER NO.
(26.97)
1.062
SIZE:
(22.2)
CAUTION
(22.2)
.875
.875
HYDRAULIC PRESSURE
7500 PSI MAX.
WORKING PRESSURE LUBE
IN PORT
1.000
687
. .687
(25.40)
1 (17.5) (17.5)
A
2.000
(50.80)
1.000
(25.40)
(25.40)
1.000
(50.80)
2.000
PARTS LIST SECTION A - A
ITEM PART NO. DESCRIPTION
1 527-100-540 End Plug / Filter Assembly with 10 Micron Filer Element
1 527-100-550 End Plug / Filter Assembly with 25 Micron Filter Element
1 521-100-560 End Plug / Filter Assembly with 40 Micron Filter Element
1 521-100-570 End Plug / Filter Assembly with 90 Micron Filter Element
THRIF-T LUBER
LOW-PRESSURE IN-LINE OIL FILTER
In-Line Filter - Helps keep contaminants that get past the
pump's screen/strainer from clogging orifice filters. Comes
complete with filter body, 25-micron filter element, gaskets
and closure plug. Measures 2.06 in. (52.4 mm) long, 1.00 in.
(25.4 min) deep and 1.25 in. (31.8 mm) high.
Model: TLLF-00. Part No. 473-000-232.
Replacement Element 473-000-231
Replacement Plug Gasket 500-130-000
Page 15
