2007 Toyota Yaris Instrument Panel Guide
2007 Toyota Yaris Instrument Panel Guide
06
SECTION 1− 1
OPERATION OF INSTRUMENTS AND
CONTROLS
Overview of instruments and controls
Instrument panel overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Instrument cluster overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Indicator symbols on the instrument panel . . . . . . . . . . . . . . . . . . . . . . . 6
US11003
Without tachometer
US11004
Engine oil replacement reminder light∗1 High engine coolant temperature warning light∗1
SECTION 1− 2
OPERATION OF INSTRUMENTS AND
CONTROLS
Keys and Doors
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Engine immobilizer system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Wireless remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Side doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Power windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Trunk lid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Theft deterrent system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Fuel tank cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
US12009 trunk.
To protect items locked in the trunk when
US12010
using valet parking, leave the sub key
with the attendant.
Since the doors and trunk lid can be
locked without a key, you should always
carry a spare master key in case you
With wireless remote control accidentally lock your keys inside the ve-
hicle. KEY NUMBER PLATE
Your key number is shown on the plate.
Keep the plate in a safe place such as
your wallet, not in the vehicle.
If you should lose your keys or if you
need additional keys, duplicates can be
made by a Toyota dealer using the key
US12008 number.
We recommend writing down the key num-
ber and storing it in a safe place.
1. Indicator light
CAUTION
2. Unlock switch
Changes or modifications not ex- 3. Lock switch
pressly approved by the party respon-
sible for compliance could void the 4. Panic switch
user’s authority to operate the equip- The wireless remote control system is
ment. designed to lock or unlock all the
doors from a distance within approxi-
mately 1 m (3 ft.) of the vehicle.
When you operate any switch, push it
slowly and securely. At this time, the indi-
cator light flashes once.
The wireless remote control key is an If you lose your wireless remote control For vehicles sold in Canada
electronic component. Observe the follow- key, contact your Toyota dealer as soon
ing instructions in order not to cause dam- as possible to avoid the possibility of This device complies with RSS−210 of
age to the key. theft, or an accident. (See “If you lose Industry Canada. Operation is subject to
Do not leave the key in places where your keys” on page 234.) the following two conditions:
the temperature becomes high such as For vehicles sold in U.S.A. (1) This device may not cause interfer-
on the dashboard. ence, and (2) this device must accept
Do not disassemble it. FCC ID: MOZB41TG any interference, including interference
that may cause undesired operation of
Avoid knocking it hard against other the device.
objects or dropping it. FCC ID: MOZB21RG
Avoid putting it in water.
This device complies with Part 15 of the
You can use up to 4 wireless remote con- FCC Rules. Operation is subject to the
trol keys for the same vehicle. Contact following two conditions:
your Toyota dealer for detailed information.
(1) This device may not cause harmful
If the wireless remote control key does interference, and (2) this device must
not actuate the doors or operate from a accept any interference received, includ-
normal distance, or the indicator light on ing interference that may cause unde-
the key is dimmed or does not come on: sired operation.
Check for closeness to a radio trans-
mitter such as a radio station or an
airport which can interfere with normal CAUTION
operation of the key.
The battery may have been consumed. Changes or modifications not ex-
Check the battery in the key. To pressly approved by the party respon-
replace the battery, see “—Replacing sible for compliance could void the
battery” on page 17. user’s authority to operate the equip-
ment.
CAUTION
NOTICE
When replacing the battery, be care-
Pushing the panic switch for 1 second
ful not to lose the components. 1. Open the cover using a flathead screw-
blows the horn intermittently and Replace only with the same or driver wrapped with plastic tape.
flashes the headlights, tail lights and equivalent type recommended by a
emergency flashers and turns on the Toyota dealer.
interior light. Dispose of used batteries according
The panic switch is used to deter vehicle to the local laws.
theft when you witness anyone attempting
to break into or damage your vehicle. Replace the battery by following these
The panic mode will last for one minute. procedures:
To stop the panic mode midway, do the
following:
Push any switch on the key.
Turn the ignition key from the “LOCK”
to “ON” position.
The panic mode does not work when the
ignition key is in the “ON” position.
2007 YARIS S/D from Jan. ’06 Prod. (OM52646U) 17
05 12.06
NOTICE
Make sure the positive side and
negative side of the battery are
faced correctly.
Do not replace the battery with wet
QS12016 QS12017 hands. Water may cause unexpected
rust.
Do not touch or move any compo-
nents inside the transmitter, or it
may interfere with proper operation.
Be careful not to bend the electrode
when inserting the battery and that
2. Remove the module from the key case. 3. Remove the battery cover of the mod- dust or oils do not adhere to the
ule. case.
Do not bend the terminals. 5. Install the battery cover of the module.
6. Install the module into the key case
4. Remove the discharged battery and put and secure the cover.
in a new battery with positive (+) side
up. After replacing the battery, check that the
key operates properly. If the key still does
not operate properly, contact your Toyota
dealer.
Side doors—
When the interior light switch is in the
“DOOR” position and any of the doors is
opened, the light will come on. After all
the doors are closed, the light remains on
for about 15 seconds before fading out.
(For further information, see “Interior light”
US12011 on page 97 in Section 1−5.)
Vehicles with the power door lock sys-
US12012
tem—When the interior light switch is in
the “DOOR” position, and the driver’s door
is unlocked using the key, the interior light
will come on and remain on for about 15
seconds before fading out. (For further
information, see “Interior light” on page
LOCKING AND UNLOCKING WITH KEY 97 in Section 1−5.) LOCKING AND UNLOCKING WITH
Insert the key into the keyhole and turn INSIDE LOCK KNOB
it. Move the lock knob.
To lock: Turn the key forward. To lock: Push the knob forward.
To unlock: Turn the key backward. To unlock: Pull the knob backward.
Vehicles with the power door lock sys- The front doors can be opened by pulling
tem—All the doors lock and unlock simul- the inside handle even if the lock knobs
taneously with the driver’s door. In the are in the locked position.
driver’s door lock, turning the key once
will unlock the driver’s door and twice in
succession will unlock all the doors simul-
taneously.
Power windows
Window
lock
switch
The windows can be operated with the Automatic operation (to open only): OPERATING THE PASSENGERS’
switch on each side door. Push the switch completely down and then WINDOWS
The ignition key must be in the “ON” posi- release it. The window will fully open. To Use the switches on the each passen-
tion. stop the window partway, lightly pull the ger’s door or the switches on the driv-
switch up and then release it. er’s door that control each passenger’s
Key off operation: The driver’s window
works for about 45 seconds even after the window.
ignition switch is turned off. They stop The window moves as long as you hold
working when either of the front door is the switch.
opened. To open: Push down the switch.
OPERATING THE DRIVER’S WINDOW To close: Pull up the switch.
Use the switch on the driver’s door. If you push in the window lock switch on
Normal operation: The window moves as the driver’s door, the passenger’s windows
long as you hold the switch. cannot be operated.
To open: Lightly push down the switch.
To close: Pull up the switch.
22 2007 YARIS S/D from Jan. ’06 Prod. (OM52646U)
05 12.06
CAUTION
Hood
To open the hood: 2. In front of the vehicle, pull up the 3. Hold the hood open by inserting the
1. Pull the hood lock release lever. The auxiliary catch lever and lift the support rod into the slot.
hood will spring up slightly. hood. To insert the support rod into the slot,
move it straight up. If it is moved to the
CAUTION side or toward the inside of the vehicle,
it may become detached.
Before driving, be sure that the hood Before closing the hood, check to see that
is closed and securely locked. Other- you have not forgotten any tools, rags,
wise, the hood may open unexpected- etc. and return the support rod to its clip−
ly while driving and an accident may this prevents rattles. Then lower the hood
occur. and make sure it locks into place. If nec-
essary, press down gently on the front
edge to lock it.
CAUTION
The system will automatically be set after Stopping the alarm TESTING THE SYSTEM
30 seconds. When the system is set, the The alarm will be stopped by the following 1. Open all the windows.
indicator light will start flashing. 3 ways: 2. Set the system as described above.
4. After making sure the indicator light 2 seconds have elapsed since the en- The doors should be locked with the
starts flashing, you may leave the ve- gine was started. key. Be sure to wait until the indicator
hicle.
Unlock any of the doors or trunk with light goes off or starts flashing.
Never leave anyone in the vehicle when the key. 3. Unlock any door from the inside. The
you set the system, because unlocking system should activate the alarm.
from the inside will activate the system. Unlock all the doors with wireless re-
mote control key. 4. Stop the alarm as described above.
WHEN THE SYSTEM IS SET
If the battery becomes discharged due 5. Repeat this operation for the other
Activating the system to the vehicle being unused for a long doors, trunk and hood.
The system will sound the alarm if any of time, etc., when the battery is recharged If the system does not work properly,
the doors is unlocked or trunk or hood is or replaced, the system will give the have it checked by your Toyota dealer.
forcibly opened without the key. alarm. If this happens, immediately unlock
The indicator light will come on when the any of the doors or the trunk with the key
system is activated. or the wireless remote control transmitter,
and the alarm will stop.
After one minute, the alarm will automati-
cally stop and the indicator light will starts CANCELLING THE SYSTEM
flashing again. The system will be cancelled by the
Reactivating the alarm above mentioned 3 ways.
Once set, the system automatically resets If the tail lights come on for 2 seconds,
the alarm after the alarm stops. the theft deterrent system has been
alarmed. Check to see if there is any
The alarm will activate again under the abnormality with your vehicle.
same circumstances described in
“Activating the system”.
This indicates that the fuel filler door 1. To open the fuel filler door, pull the 2. To remove the fuel tank cap, turn
is on the left side of your vehicle. lever up. the cap slowly counterclockwise,
When refueling, turn off the engine. then pause slightly before removing
it. After removing the cap, hang it
on the cap hanger.
CAUTION
It is not unusual to hear a slight swoosh
Do not smoke, cause sparks or al- when the cap is opened.
low open flames when refueling. When installing the cap, turn it clock-
The fumes are flammable. wise until one click is heard, in order
When opening the cap, do not re- to fully close it. The cap returns slight-
move the cap quickly. In hot weath- ly when your hand is released from the
er, fuel under pressure could cause cap after closure, however this does
injury by spraying out of the filler not cause any problems.
neck if the cap is suddenly re- If the cap is not tightened securely, the
moved. malfunction indicator lamp comes on.
Make sure the cap is tightened securely.
CAUTION
SECTION 1− 3
OPERATION OF INSTRUMENTS AND
CONTROLS
Occupant restraint systems
Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Front seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Rear seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Fold−down rear seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Armrest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Head restraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
SRS driver and front passenger airbags . . . . . . . . . . . . . . . . . . . . . . . . 49
SRS side airbags and curtain shield airbags . . . . . . . . . . . . . . . . . . . . 55
Front passenger occupant classification system . . . . . . . . . . . . . . . . 63
Child restraint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Front seats—
Seats —Front seat precautions
While the vehicle is being driven, all ve- Driver seat
hicle occupants should have the seatback Slightly recline the back of the
upright, sit well back in the seat and prop- CAUTION seat. Although vehicle designs vary,
erly wear the seat belts provided. many drivers can achieve the 250
The SRS driver airbag deploys with mm (10 in.) distance, even with the
CAUTION considerable force, and can cause driver seat all the way forward, sim-
death or serious injury especially if ply by reclining the back of the
Do not drive the vehicle unless the the driver is very close to the airbag. seat somewhat. If reclining the back
occupants are properly seated. Do The National Highway Traffic Safety of your seat makes it hard to see
not allow any passengers to sit on Administration (“NHTSA”) advises: the road, raise yourself by using a
top of a folded−down seatback, or firm, non−slippery cushion, or raise
Since the risk zone for driver airbag the seat if your vehicle has that
in the luggage compartment or car- is the first 50—75 mm (2—3 in.) of
go area. Persons not properly feature.
inflation, placing yourself 250 mm (10
seated and/or not properly re- in.) from your driver airbag provides If your steering wheel is adjustable,
strained by seat belts can be se- you with a clear margin of safety. tilt it downward. This points the air-
verely injured in the event of emer- This distance is measured from the bag toward your chest instead of
gency braking or a collision. center of the steering wheel to your your head and neck.
During driving, do not allow any breastbone. If you sit less than 250 The seat should be adjusted as rec-
passengers to stand up or move mm (10 in.) away now, you can ommended by NHTSA above, while
around between seats. Otherwise, change your driving position in sever- still maintaining control of the foot
severe injuries can occur in the al ways: pedals, steering wheel, and your view
event of emergency braking or a Move your seat to the rear as far of the instrument panel controls.
collision. as you can while still reaching the
pedals comfortably.
Rear seats—
—Rear seat precautions
Folding down the rear seatbacks will en-
CAUTION CAUTION large the luggage compartment. See
“—Stowage precautions” on page 194 in
Avoid reclining the seatback any Do not adjust the seat while the Section 2 for precautions when loading
more than needed. The seat belts pro- vehicle is moving. luggage.
vide maximum protection in a frontal Be careful that the seat does not
or rear collision when the driver and hit a passenger or luggage.
the front passenger are sitting up
straight and well back in the seats. If Be careful not to get your hands or
you are reclined, the lap belt may feet pinched in the seat.
slide past your hips and apply re- After adjusting the seatback, push
straint forces directly to the abdomen your body back against the seat to
or your neck may contact the shoul- make sure the seat is locked in
der belt. In the event of a frontal position.
collision, the more the seat is re- When returning the seatback to the
clined, the greater the risk of death upright position, observe the follow-
or personal injury. ing precautions in order to prevent
personal injury in a collision or
sudden stop:
Make sure the seatback is securely
locked by pushing forward and rear-
ward on the top of the seatback.
Failure to do so will prevent the
seat belt from operating properly.
Make sure the seat belts are not
twisted or caught in the seatback
and are arranged in their proper
position and are ready to use.
BEFORE FOLDING DOWN REAR SEATS Remove the seat belt from the seat belt FOLDING REAR SEATS
1. Before folding down the seatback, guide. After setting the seatback security lock
disconnect the center seat belt to lever to unlock position, pull the seat-
prevent damage. back angle adjusting lever up and fold
Insert the key into the hole on the the seatback down.
buckle to release tab 1 (with hook end), Each seatback can be folded separately.
and allow the belt to retract.
CAUTION
Armrest
CAUTION
Seat belts—
Head restraints —Seat belt precautions
For your safety and comfort, adjust the Toyota strongly urges that the driver and
head restraint before driving. passengers in the vehicle be properly re-
To raise: Pull it up. strained at all times with the seat belts
To lower: Push it down while pressing the provided. Failure to do so could increase
lock release button. the chance of injury and/or the severity of
injury in accidents.
PS13513 Rear center head restraint—When an oc-
cupant sits on the rear center seat, al- The seat belts provided for your vehicle
are designed for people of adult size,
ways pull up the rear center head re-
straint to the lock position. large enough to properly wear them.
The head restraint is most effective when Child. Use a child restraint system ap-
it is close to your head. Therefore, using propriate for the child until the child be-
a cushion on the seatback is not recom- comes large enough to properly wear the
mended. vehicle’s seat belts. See “Child restraint”
Front seat on page 67 for details.
CAUTION If a child is too large for a child restraint
system, the child should sit in the rear
Adjust the center of the head re- seat and must be restrained using the
straint so that it is closest to the vehicle’s seat belt. According to accident
top of your ears. statistics, the child is safer when properly
After adjusting the head restraint, restrained in the rear seat than in the
front seat.
make sure it is locked in position.
US13011 Do not drive with the head re- If a child must sit in the front seat, the
seat belts should be worn properly. If an
straints removed.
accident occurs and the seat belts are not
worn properly, the force of the rapid infla-
tion of the airbag may cause death or
serious injury to the child.
Rear seat
Adjust the seat as needed and sit up Adjust the position of the lap and
CAUTION
straight and well back in the seat. To shoulder belts.
fasten your belt, pull it out of the re- After inserting the tab, make sure Position the lap belt as low as possible
tractor and insert the tab into the the tab and buckle are locked and on your hips—not on your waist, then ad-
buckle. that the belt is not twisted. just it to a snug fit by pulling the shoulder
You will hear a click when the tab locks Do not insert coins, clips, etc. in portion upward through the latch plate.
into the buckle. the buckle as this may prevent you
The seat belt length automatically adjusts from properly latching the tab and
to your size and the seat position. buckle.
The retractor will lock the belt during a If the seat belt does not function
sudden stop or on impact. It also may normally, immediately contact your
lock if you lean forward too quickly. A Toyota dealer. Do not use the seat
slow, easy motion will allow the belt to until the seat belt is fixed, because
extend, and you can move around freely. it cannot protect an adult occupant
or your child from death or serious
injury.
CAUTION CAUTION
Both high−positioned lap belts and Always make sure the shoulder belt
loose−fitting belts could cause seri- is positioned across the center of
ous injuries due to sliding under your shoulder. The belt should be
the lap belt during a collision or
other unintended event. Keep the PS13518 kept away from your neck, but not
falling off your shoulder. Failure to
lap belt positioned as low on hips do so could reduce the amount of
as possible. protection in an accident and cause
Do not place the shoulder belt un- serious injures in a collision.
der your arm.
To release the belt, press the buckle REAR CENTER SEAT BELT Two buckles and tabs for rear center
release button and allow the belt to The rear center seat belt is a 3−point type seat belt
retract. restraint with 2 buckles. Both seat belt The two tabs have different shapes to pre-
If the belt does not retract smoothly, pull buckles must be correctly located and se- vent the belt from being buckled in the
it out and check for kinks or twists. Then curely latched for proper operation. wrong place.
make sure it remains untwisted as it re- Make sure buckle 1 is securely latched Buckle 1—Matches the tab with the
tracts. for ready use of the center seat belt. hooked end
Buckle 2—Matches the tab with the
concave end
CAUTION
This warning light system monitors the The seat belt pretensioner assembly or
airbag sensor assembly, front airbag surrounding area has been damaged.
sensors, side and curtain shield airbag
sensors, curtain shield airbag sensors,
driver’s seat position sensor, driver’s seat
belt buckle switch, front passenger
occupant classification system, “AIRBAG
ON” indicator light, “AIRBAG OFF”
US13001
indicator light, front passenger’s seat belt
buckle switch, seat belt pretensioner
assemblies, inflators, interconnecting
wiring and power sources. (For details,
see “Service reminder indicators and
warning buzzers” on page 105 in Section
1−6.) In the following cases, contact your Toyota
If any of the following conditions occurs, dealer as soon as possible:
this indicates a malfunction of the airbags The front part of the vehicle (shaded
or seat belt pretensioners. Contact your in the illustration) was involved in an
Toyota dealer as soon as possible. accident that was not severe enough to
The light does not come on when the cause the seat belt pretensioners to
ignition key is turned to the “ON” posi- operate.
tion or remains on for more than 6 Either seat belt pretensioner assembly
seconds or flashes. or surrounding area is scratched,
The light comes on or starts flashing cracked, or otherwise damaged.
while driving.
If any seat belt does not retract or can
not be pulled out due to a malfunction
or activation of the relevant seat belt
pretensioner.
Do not sit on the edge of the seat Toyota strongly recommends that all Do not put anything or any part of
or lean against the dashboard when infants and children be placed in your body on or in front of the
the vehicle is in use, since the the rear seat of the vehicle and be dashboard or steering wheel pad
front passenger airbag could inflate properly restrained. that houses the front airbag sys-
with considerable speed and force. Do not hold a child on your lap or tem. They might restrict inflation or
Anyone who is up against, or very in your arms. Use a child restraint cause death or serious injury as
close to, an airbag when it inflates, system in the rear seat. For instruc- they are projected rearward by the
can be killed or seriously injured. tions concerning the installation of force of deploying airbags. Like-
Sit up straight and well back in the a child restraint system, see “Child wise, the driver and front passenger
seat, and always use your seat belt restraint” on page 67 in this Sec- should not hold objects in their
properly. tion. arms or on their knees.
The SRS side airbag and curtain shield The SRS side airbags and curtain shield The SRS side airbag and curtain shield
airbag system may not activate if the airbags are not generally designed to airbag system consists mainly of the fol-
vehicle is subjected to a collision from inflate if the vehicle is involved in a lowing components, and their locations are
the side at certain angles, or a collision front or rear collision, if it rolls over, shown in the illustration.
to the side of the vehicle body other or if it is involved in a low−speed side 1. SRS warning light
than the passenger compartment as collision.
shown in the illustration. 2. “AIRBAG ON” and “AIRBAG OFF” indi-
cator lights
The SRS side airbags and curtain shield
airbags are designed to inflate when the 3. Front passenger’s seat belt buckle
passenger compartment area suffers a se- switch
vere impact from the side. 4. Front passenger occupant classification
Always wear your seat belt properly. system (ECU and sensors)
5. Side airbag modules
(airbag and inflator)
6. Curtain shield airbag modules
(airbag and inflator)
Do not allow anyone to get his/her Do not allow anyone to kneel on Do not allow anyone to get his/her
head closer to the area where the the passenger seat, facing the pas- head or hands out of windows
side airbag and curtain shield air- senger’s side door, since the side since the curtain shield airbags
bag inflate, since these airbags airbag and curtain shield airbag could inflate with considerable
could inflate with considerable could inflate with considerable speed and force. Otherwise, he/she
speed and force. Otherwise, he/she speed and force. Otherwise, he/she may be killed or seriously injured.
may be killed or seriously injured. may be killed or seriously injured. Special care should be taken espe-
Special care should be taken espe- Special care should be taken espe- cially when you have a small child
cially when you have a small child cially when you have a small child in the vehicle.
in the vehicle. in the vehicle.
This warning light system monitors the In the following cases, contact your Toyota
airbag sensor assembly, front airbag dealer as soon as possible:
sensors, side and curtain shield airbag Any of the SRS side airbags and cur-
sensors, curtain shield airbag sensors, tain shield airbags have been inflated.
driver’s seat position sensor, driver’s seat
belt buckle switch, front passenger The portion of the doors (shaded in the
occupant classification system, “AIRBAG illustration) was involved in an accident
ON” indicator light, “AIRBAG OFF” that was not severe enough to cause
indicator light, front passenger’s seat belt the SRS side airbags and curtain
buckle switch, seat belt pretensioner shield airbags to inflate.
assemblies, inflators, interconnecting The surface of the seats with the side
wiring and power sources. (For details, airbag (shaded in the illustration) is
see “Service reminder indicators and scratched, cracked, or otherwise dam-
warning buzzers” on page 105 in Section aged.
1−6.)
If either of the following conditions occurs,
US13115 The portion of the front pillars, rear
pillars or roof side rail garnishes (pad-
this indicates a malfunction of the airbags ding) containing the curtain shield air-
or seat belt pretensioners. Contact your bags inside (shaded in the illustration)
Toyota dealer as soon as possible. is scratched, cracked, or otherwise
The light does not come on when the damaged.
ignition key is turned to the “ON” posi-
NOTICE
tion or remains on for more than 6
seconds or flashes. Do not disconnect the battery cables
The light comes on or starts flashing before contacting your Toyota dealer.
while driving.
The SRS warning light and “AIRBAG OFF”
indicator light will come on if there is a
malfunction in the front passenger occu-
pant classification system.
Make sure that the “AIRBAG ON” indicator The SRS warning light and “AIRBAG
light is illuminated when a person of adult OFF” indicator light will come on if
size is seated in the front passenger seat. there is a malfunction in the front pas-
If the “AIRBAG OFF” indicator light is senger occupant classification system.
illuminated, ask the passenger to sit up Contact your Toyota dealer as soon as
straight, well back in the seat, and with possible.
the seat belt worn correctly. If the
“AIRBAG OFF” indicator light remains
US13054
illuminated, either ask the passenger to
move to the rear seat, or if that is not
possible, move the front passenger seat
fully rearward.
With tachometer
US13053
Without tachometer
CAUTION Make sure the “AIRBAG ON” If an adult sits in the front
indicator light is illuminated when passenger seat, the “AIRBAG ON”
To avoid potential death or serious using the seat belt extender for the indicator light should be
injury when the front passenger occu- front passenger seat. If the illuminated. If the “AIRBAG OFF”
pant classification system does not “AIRBAG OFF” indicator light is indicator light is illuminated, ask
detect the conditions correctly, ob- illuminated, disconnect the extender the passenger to sit up straight,
serve the following. tongue from the seat belt buckle, well back in the seat, feet on the
Do not recline the front passenger then reconnect the seat belt. floor, and with the seat belt worn
seat seatback so that it interferes Reconnect the seat belt extender correctly. If the “AIRBAG OFF”
with a rear seat as it may cause the after making sure the “AIRBAG ON” indicator light still remains
“AIRBAG OFF” indicator light be il- indicator light is illuminated. If you illuminated, either ask the
luminated. If the seatback interferes use the seat belt extender while the passenger to move to the rear seat,
with the rear seat, return the seat- “AIRBAG OFF” indicator light is or if that is not possible, move the
back to a position where it does illuminated, the front passenger front passenger seat fully rearward.
not interfere with the rear seat. airbag and side airbag on the front Wear the seat belt properly.
passenger side may not activate
Keep the front passenger seatback correctly, which could cause death Make sure the front passenger’s
as upright as possible when the ve- or serious injury in the event of seat belt tab has not been left in-
hicle is moving. Reclining the seat- collision. serted into the buckle before some-
back excessively may lessen the ef- one sits in the front passenger
fectiveness of the seat belt system. seat.
Do not place a heavy load on the
front passenger seat.
Do not apply pressure to the front
passenger seat by resting hands or
legs on the seatback.
Child restraint—
—Child restraint precautions
Toyota strongly urges the use of ap-
Do not let a rear passenger lift the Do not kick the front passenger propriate child restraint systems for
front passenger seat with their feet seat or subject it to severe impact. children.
or press on the seatback with their Otherwise, the SRS warning light
legs. may come on to indicate a malfunc- The laws of all 50 states in the U.S.A.
and Canada now require the use of a
Do not put objects under the front tion of the detection system. In this
child restraint system.
passenger seat. case, contact your Toyota dealer im-
mediately. Your vehicle conforms to SAE J1819.
Do not attach a commercial seat-
If a child is too large for a child restraint
back table or other heavy item to
the back of the front passenger The “AIRBAG ON” indicator light may be system, the child should sit in the rear
illuminated (the front passenger airbag and seat and must be restrained using the
seat.
side airbag on the front passenger seat vehicle’s seat belt. See “Seat belts” on
Child restraint systems installed on may deploy) even if observing the above page 38 in this Section for details.
the rear seat should not contact the cautions, when a child sits in, or a for-
front seatbacks. ward−facing child restraint system is CAUTION
When it is unavoidable to install the installed on the front passenger seat. Re-
forward−facing child restraint sys- fer to all the cautions in this Section and For effective protection in automo-
tem on the front passenger seat, “Child restraint” on page 67 in this Sec- bile accidents and sudden stops, a
install the child restraint system on tion. child must be properly restrained,
the front passenger seat in the using a seat belt or child restraint
proper order. (As for the installation system depending on the age and
order, see “—Installation with seat size of the child. Holding a child in
belt” on page 70 in this Section.) your arms is not a substitute for a
Do not modify or remove the front child restraint system. In an acci-
seats. dent, the child can be crushed
against the windshield, or between
you and the vehicle’s interior.
Toyota strongly urges use of a A forward−facing child restraint sys- Do not use the seat belt extender
proper child restraint system which tem should be allowed to be when installing a child restraint
conforms to the size of the child, installed on the front passenger system on the front or rear passen-
installed on the rear seat. Accord- seat only when it is unavoidable. ger seat. If installing a child re-
ing to accident statistics, the child Always move the seat as far back straint system with the seat belt
is safer when properly restrained in as possible even if the “AIRBAG extender connected to the seat belt,
the rear seat than in the front seat. OFF” indicator light is illuminated, the seat belt will not securely hold
Never install a rear−facing child re- because the front passenger airbag the child restraint system, which
straint system on the front passen- could inflate with considerable could cause death or serious injury
ger seat even if the “AIRBAG OFF” speed and force. Otherwise, the to the child or other passengers in
indicator light is illuminated. In the child may be killed or seriously in- the event of collision.
event of an accident, the force of jured. Make sure you have complied with
the rapid inflation of the front pas- On vehicles with side airbags and all installation instructions provided
senger airbag can cause death or curtain shield airbags, do not allow by the child restraint manufacturer
serious injury to the child if the the child to lean his/her head or and that the system is properly se-
rear−facing child restraint system is any part of his/her body against the cured. If it is not secured properly,
installed on the front passenger door or the area of the seat, front it may cause death or serious injury
seat. or rear pillar or roof side rail from to the child in the event of a sud-
which the side airbags or curtain den stop or accident.
shield airbags deploy even if the
child is seated in the child restraint
system. It is dangerous if the side
airbag and curtain shield airbag in-
flate, and the impact could cause
death or serious injury to the child.
Upright
CAUTION
4. To remove the infant seat, press the (B) CONVERTIBLE SEAT INSTALLATION
CAUTION buckle release button and allow the A convertible seat must be used in for-
belt to retract completely. The belt will ward−facing or rear−facing position de-
Push and pull the child restraint sys- move freely again and be ready to pending on the age and size of the
tem in different directions to be sure work for an adult or older child passen-
it is secure. Follow all the installation child. Remove the head restraint before
ger. installing the convertible seat in a for-
instructions provided by its manufac-
ward−facing position on the rear seat.
turer.
When installing, follow the manufactur-
er’s instructions about the applicable
age and size of the child as well as
directions for installing the child re-
straint system.
Install the child restraint system on the 6. While pressing the convertible seat The “AIRBAG OFF” indicator light should
front passenger seat only when it is un- firmly against the seat cushion and be illuminated when the ignition key is in
avoidable. Your vehicle is equipped with a seatback, let the shoulder belt retract the “ON” position and the child is in the
front passenger occupant classification as far as it will go to hold the convert- child restraint system after following these
system. In order to activate the occupant ible seat securely. procedures. The “AIRBAG OFF” indicator
classification system correctly, install the light indicates the SRS front passenger
forward−facing child restraint system on CAUTION airbag and side airbag on the passenger
the front passenger seat in the following side will not deploy. If the “AIRBAG ON”
order: Push and pull the child restraint sys- indicator light is illuminated, do the follow-
1. Turn the ignition key to the “ON” posi- tem in different directions to be sure ing procedure:
tion. it is secure. Follow all the installation 1. Turn the ignition off.
instructions provided by its manufac-
2. Move the front passenger seat to the 2. Remove the child restraint system.
turer.
rearward position. 3. When reinstalling a child restraint sys-
3. If you must install the child restraint tem, make sure the seatback does not
7. Put a child on the child restraint sys-
system on the front passenger seat, press the child restraint system into
tem and secure the child, complying
put the child restraint system putting the seat cushion. If this occurs, adjust
with the instructions provided by the
your weight on the front passenger the seatback angle slightly.
child restraint system manufacturer.
seat. 4. Then make sure the head restraint is
4. Insert the seat belt tab into the seat not pressing the child restraint system
belt buckle. into the seat cushion. If this occurs,
5. Fully extend the shoulder belt to put it raise the head restraint.
in the lock mode. When the belt is 5. Turn the ignition on again.
then retracted even slightly, it cannot
be extended. To hold the seat securely,
make sure the belt is in the lock mode
before letting the belt retract.
CAUTION
CAUTION
CAUTION
Anchor brackets
2. To remove the booster seat, press the Follow the procedure below for a child Use the anchor brackets on the luggage
buckle release button and allow the restraint system that requires the use compartment to attach the top strap.
belt to retract. of a top strap. Anchor brackets are installed for each
rear seating position.
This symbol indicates the locations of the
anchor brackets.
TO USE THE ANCHOR BRACKET: 2. Open the lid of the anchor bracket. 3. Securely fasten the child restraint
1. Remove the head restraint. system with the seat belt.
Latch the hook onto the anchor
bracket and tighten the top strap.
For instructions to install the child re-
straint system, see “Child restraint” on
page 67 in this Section.
After returning the seat to its original posi-
tion, be certain to replace the head re-
straint.
CAUTION
Type A
Canada only
Type B
SECTION 1− 4
OPERATION OF INSTRUMENTS AND
CONTROLS
Steering wheel and Mirrors
Tilt steering wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Outside rear view mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Anti−glare inside rear view mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Vanity mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
CAUTION
To change the steering wheel angle, Adjust the mirror so that you can just
hold the steering wheel, push down the see the side of your vehicle in the mir-
lock release lever, tilt the steering ror.
wheel to the desired angle and return Be careful when judging the size or dis-
the lever to its original position. tance of any object seen in the outside
rear view mirror on the passenger’s side
because it is a convex mirror. Any object
seen in a convex mirror will look smaller
and farther away than when seen in a flat
mirror.
CAUTION NOTICE
If ice should jam the mirror, do not
Do not adjust the mirror while the
operate the control or scrape the mir-
vehicle is moving. Doing so may
ror face. Use a spray de−icer to free
cause the driver to mishandle the ve-
the mirror.
hicle and an accident may occur re-
sulting in death or serious injuries. US14005a
US14004 US14006
To adjust the rear view mirror, simply The rear view mirrors can be folded
operate the control lever. backward for parking in compact areas.
To fold the rear view mirror, push back-
NOTICE
ward until you hear the click.
If ice should jam the mirror, do not
operate the control or scrape the mir- CAUTION
ror face. Use a spray de−icer to free
the mirror. Do not drive with the mirrors folded
backward. Both the driver and pas-
senger side rear view mirrors must
be extended and properly adjusted
before driving.
CAUTION
Adjust the mirror so you can just see To use the vanity mirrors, swing down
the rear of your vehicle in the mirror. the sun visor and slide the cover.
To reduce glare from the headlights of
the vehicle behind you during night
driving, operate the lever on the lower
edge of the mirror.
Daylight driving—Lever at position 1
The reflection in the mirror has greater
clarity at this position.
Night driving—Lever at position 2
Remember that by reducing glare you also
lose some rear view clarity.
SECTION 1− 5
OPERATION OF INSTRUMENTS AND
CONTROLS
Lights, Wipers and Defogger
Headlights and turn signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Emergency flashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Instrument panel light control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Front fog lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Interior light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Personal lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Windshield wipers and washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Rear window defogger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Emergency flashers
High−Low beams—For high beams, turn TURN SIGNALS To turn on the emergency flashers,
the headlights on and push the lever away To signal a turn, push the headlight/ push the switch.
from you (position 1). Pull the lever to- turn signal lever up or down to position All the turn signal lights will flash. To turn
ward you (position 2) for low beams. 1. them off, push the switch once again.
The headlight high beam indicator light The key must be in the “ON” position. Turn on the emergency flashers to warn
(blue light) on the instrument panel will other drivers if your vehicle must be
tell you that the high beams are on. The lever automatically returns after you
make a turn, but you may have to return stopped where it might be a traffic hazard.
Flashing the high beam headlights it by hand after you change lanes. Always pull as far off the road as pos-
(position 3)—Pull the lever all the way sible.
back. The high beam headlights turn off To signal a lane change, move the lever
when you release the lever. up or down to the pressure point (position The turn signal light switch will not work
2) and hold it. when the emergency flashers are operat-
You can flash the high beam headlights ing.
with the knob turned to “OFF”. If the turn signal indicator lights (green
lights) on the instrument panel flash faster
than normal, a front or rear turn signal
bulb is burned out. See “Replacing light
bulbs” on page 276 in Section 7−3.
2007 YARIS S/D from Jan. ’06 Prod. (OM52646U) 95
05 12.06
To adjust the brightness of the instru- To turn on the front fog lights, twist
ment panel lights, turn the dial. the band of the headlight and turn sig-
With the dial turned fully up, the intensity nal switch lever. They will come on
of the instrument panel lights will not be when the head lights are on low beam.
reduced even when the tail lights/head-
lights are turned on.
Interior light
ILLUMINATED ENTRY SYSTEM Vehicles with the power door lock system
Door linked operation—When the switch is and vehicles sold in Puerto Rico—The
in the “DOOR” position and any of the following adjustments can be made in this
side doors is opened, the light will come system. For details, contact your Toyota
on. After all the side doors are closed, the dealer.
light remains on for about 15 seconds Vehicles with the power door lock sys-
PS15508 before fading out. tem—Cancelling the door key or the
wireless remote control linked operation
Ignition switch linked operation—When the
switch is in the “DOOR” position, and the Cancelling the ignition switch linked op-
ignition switch is turned to “LOCK”, the eration
light will come on. The light remains on Changing the duration of lighting
for about 15 seconds before fading out.
To prevent the battery being discharged,
However, in the following cases, the light the light will automatically turn off when
To turn on the interior light, slide the goes off immediately. the key is removed and the door is left
switch. All the doors are closed when the igni- opened with the switch at the “DOOR”
The interior light switch has the following tion key is in the “ACC” or “ON” posi- position for 20 minutes or more.
positions: tion.
“ON”—Keeps the light on all the time. Vehicles with the power door lock sys-
“OFF”—Turns the light off. tem—All the doors are closed and
locked.
“DOOR”—Turns the light on when any
Vehicles with the power door lock sys-
side doors are opened. The light goes off
when all the side doors are closed. tem—When the driver’s door is unlocked
using either the key or the wireless re-
mote control, the interior light will come
on and remain on for about 15 seconds
before fading out.
SECTION 1− 6
OPERATION OF INSTRUMENTS AND
CONTROLS
Gauges, Meters and Service reminder indicators
Fuel gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Engine coolant temperature indicator and warning light . . . . . . . . . 102
Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Odometer and two trip meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Service reminder indicators and warning buzzers . . . . . . . . . . . . . . 105
With tachometer
The gauge works when the ignition If the low fuel level warning light flashes,
switch is on and indicates the approxi- fill the fuel tank as soon as possible.
mate quantity of fuel remaining in the Further fuel reduction makes the light
tank. blink quicker.
Nearly full—Indicator at “F” If the fuel tank is completely empty, the
Nearly empty—Indicator at “E” malfunction indicator lamp comes on. Fill
It is a good idea to keep the tank over the fuel tank immediately.
1/4 full. The indicator lamp goes off after driving
several times. If the indicator lamp does US16001
not go off, contact your Toyota dealer as
soon as possible.
Without tachometer
Tachometer
1. High engine coolant temperature warn- Your vehicle may overheat during severe
ing light operating conditions, such as:
2. Low engine coolant temperature indica- Driving up a long hill on a hot day.
tor light Reducing speed or stopping after high
The indicator and warning lights indi- speed driving.
cate the engine coolant temperature
when the ignition switch is on. The en-
Idling for a long period with the air
conditioning on in stop−and−go traffic.
US16504a
gine operating temperature will vary
with changes in weather and engine Towing a trailer.
load.
NOTICE
The high engine coolant temperature warn-
ing light will come on when the ignition Do not remove the thermostat in
key is turned to the “ON” position. After the engine cooling system as this
a few seconds, the light will go off. may cause the engine to overheat. The tachometer indicates engine speed
The thermostat is designed to con- in thousands of rpm (revolutions per
If your engine coolant temperature is cool
trol the flow of coolant to keep the minute). Use it while driving to select
with the ignition switch on, the low engine
temperature of the engine within correct shift points and to prevent en-
coolant temperature indicator light comes
the specified operating range. gine lugging and over−revving.
on. If it keeps lighting on with the engine
fully warmed, contact your Toyota dealer Do not continue driving with an Driving with the engine running too fast
as soon as possible to service the ve- overheated engine. See “If your causes excessive engine wear and poor
hicle. vehicle overheats” on page 218 in fuel economy. Remember, in most cases
Section 4. the slower the engine speed, the greater
If the high engine coolant temperature
warning light flashes, your engine is too the fuel economy.
hot. If your vehicle overheats, stop your
vehicle and allow the engine to cool.
NOTICE
Do not let the indicator get segment
into the red zone. This may cause
severe engine damage.
(a) or If parking brake is off, stop immediately and contact Toyota dealer.
Take vehicle to Toyota dealer. If brake system warning light is also on, stop immedi-
(h) or
ately and contact Toyota dealer.
Key reminder
(p) Remove key.
buzzer
Light reminder
(q) Turn off lights.
buzzer
(a) Brake System Warning Light A warning light turning on briefly during (b) Driver’s Seat Belt Reminder Light
This light comes on in the following cases operation does not indicate a problem. and Buzzer
when the ignition key is in the “ON” posi- The light and buzzer act as a reminder to
tion. CAUTION buckle up the driver’s seat belt.
When the parking brake is applied... If either of the following conditions
Once the ignition key is turned to “ON” or
Vehicles with anti−lock brake system— “START”, the reminder light flashes and
occurs, immediately stop your vehicle
buzzer sounds if the driver’s seat belt is
This light comes on for a few seconds at a safe place and contact your
not fastened. Unless the driver fastens the
when the ignition key is turned to the Toyota dealer
belt, the light keeps flashing and the
“ON” position even after the parking brake The light does not turn off even buzzer stops after about 6 seconds.
is released. after the parking brake is released
If the vehicle speed rises above 20 km/h
When the brake fluid level is low... while the engine is running.
(12 mph) with the seat belt unfastened,
In this case, the brakes may not the buzzer will sound for 10 seconds.
CAUTION work properly and your stopping Then, if the seat belt is still unfastened,
distance will become longer. De- the buzzer will sound in a different tone
It is dangerous to continue driving press the brake pedal firmly and for 20 seconds. Even if the vehicle speed
normally when the brake fluid level is bring the vehicle to an immediate drops below 20 km/h (12 mph), the buzzer
low. stop. will continue to sound. To stop the buzzer,
Vehicles with anti−lock brake sys- fasten the seat belt. If the buzzer still
Have your vehicle checked at your tem— sounds, make sure the front passenger’s
seat belt is fastened.
Toyota dealer in the following cases: The brake system warning light re-
The light does not come on even if the mains on together with the “ABS” The buzzer can be disabled. For details,
parking brake is applied when the igni- warning light. contact your Toyota dealer.
tion key is in the “ON” position. In this case, not only the anti−lock (c) Front Passenger’s Seat Belt
Vehicles with anti−lock brake system— brake system will fail but also the Reminder Light and Buzzer
The light does not come on even if the vehicle will become extremely un- The light and buzzer act as a reminder to
ignition key is turned on with the park- stable during braking. have the front passenger buckle up the
ing brake released. seat belt.
Once the ignition key is turned to “ON” or If the lamp does not go off even after
NOTICE
“START”, the reminder light flashes if a several trips, contact your Toyota dealer
passenger sits in the front passenger seat When the charging system warning as soon as possible.
and does not fasten the seat belt. light comes on while the engine is If the fuel tank is not empty or the fuel
If the vehicle speed rises above 20 km/h running, malfunctions such as the en- tank cap is not loose...
(12 mph) with the seat belt unfastened, gine drive belt being broken may have
There is a problem somewhere in the
the buzzer will sound for 10 seconds. occurred. If the warning light comes
engine, emission control system, elec-
Then, if the seat belt is still unfastened, on, immediately stop the vehicle in a
tronic throttle control system, automatic
the buzzer will sound in a different tone safe place and contact your Toyota
transmission electrical system or warn-
for 20 seconds. Even if the vehicle speed dealer.
ing light system itself.
drops below 20 km/h (12 mph), the buzzer
will continue to sound. To stop the buzzer, Contact your Toyota dealer as soon as
(e) Malfunction Indicator Lamp
fasten the seat belt. If the buzzer still possible to service the vehicle.
This lamp comes on when the ignition
sounds, make sure the driver’s seat belt If engine speed does not increase when
key is turned to the “ON” position and
is fastened. the accelerator pedal is depressed, there
goes off after the engine starts. This
If luggage or other load is placed on the may be a problem somewhere in the elec-
means that the warning light system is
front passenger seat, depending on its tronic throttle control system.
operating properly.
weight, the reminder light may flash and At this time, vibration may occur. Howev-
If the lamp remains on, or the lamp
buzzer to sound. er, if you depress the accelerator pedal
comes on while driving, first check the
The buzzer can be disabled. For details, more firmly and slowly, you can drive your
followings.
contact your Toyota dealer. vehicle at low speeds. Have your vehicle
Empty fuel tank checked by your Toyota dealer as soon as
(d) Charging System Warning Light possible.
If the fuel tank is empty, refuel immedi-
This warning light comes on when the ately. Even if the abnormality of the electronic
ignition key is turned to the “ON” position,
and goes off when the engine is started. Loose fuel tank cap throttle control system is corrected during
low speed driving, the system may not be
When there are problems in the charging If the fuel tank cap is loose, securely
recovered until the engine is stopped and
system while the engine is running, the tighten it.
the engine off.
warning light comes on. These cases are temporary malfunctions.
The malfunction indicator lamp will go off
after taking several driving trips.
2007 YARIS S/D from Jan. ’06 Prod. (OM52646U) 109
05 12.06
If it flickers or stays on while you are When the “ABS” warning light is on (and
CAUTION driving, pull off the road to a safe place the brake system warning light is off), the
and stop the engine immediately. Call a anti−lock brake system does not operate,
Be especially careful to prevent erro- Toyota dealer or qualified repair shop for but the brake system still operates con-
neous pedal operation. assistance. ventionally.
The light may occasionally flicker when When the “ABS” warning light is on (and
Emissions Inspection and Maintenance the engine is idling or it may come on the brake system warning light is off), the
(I/M) programs briefly after a hard stop. There is no anti−lock brake system does not operate
Your vehicle may not pass a state emis- cause for concern if it then goes out when so that the wheels could lock up during
sion inspection if the malfunction indicator the engine is accelerated slightly. a sudden braking or braking on slippery
lamp remains on. Contact your Toyota The light may come on when the oil level road surfaces.
dealer to check your vehicle’s emission is extremely low. It is not designed to If either of the following conditions
control system and OBD (On−Board Diag- indicate low oil level, and the oil level occurs, this indicates a malfunction
nostics) system before taking your vehicle must be checked using the level dipstick. somewhere in the parts monitored by
for the inspection. the warning light system. Contact your
For details, see “Emissions Inspection and NOTICE Toyota dealer as soon as possible to
Maintenance (I/M) programs” on page 248 service the vehicle.
Do not drive the vehicle with the
in Section 6.
warning light on—even for one block. The light does not come on when the
(f) Low Fuel Level Warning Light It may ruin the engine. ignition key is turned to the “ON” posi-
This light flashes when the fuel level in tion or remains on.
the tank becomes nearly empty. Fill up (h) “ABS” Warning Light The light comes on while you are driv-
the tank as soon as possible. ing.
The light comes on when the ignition key
On inclines or curves, due to the move- is turned to the “ON” position. If the anti− A warning light turning on briefly during
ment of fuel in the tank, the low fuel level lock brake system works properly, the operation does not indicate a problem.
warning light may flash earlier than usual. light turns off after a few seconds. There-
(g) Low Engine Oil Pressure Warning after, if the system malfunctions, the light
Light comes on again.
This light warns that the engine oil pres-
sure is too low.
110 2007 YARIS S/D from Jan. ’06 Prod. (OM52646U)
05 12.06
If either of the following conditions occurs, When you drive for about 7200 km (4500 If the system fails to reset, the light will
this indicates a malfunction somewhere in miles) after the engine oil replacement, continue flashing.
the parts monitored by the warning light this light illuminates for about 3 seconds (o) High Engine Coolant Temperature
system. Contact your Toyota dealer as and then flashes for about 12 seconds Warning Light
soon as possible to service the vehicle. with the ignition key turned to the “ON”
The light operates to warn that the engine
The light does not come on when the position. If you continue driving without
is almost overheating.
ignition key is turned to the “ON” posi- replacing the engine oil, and if the
tion or remains on for more than 6 distance driven exceeds 8000 km (5000 The high engine coolant temperature warn-
seconds or flashes. miles), the light will come on. The light ing light will come on when the ignition
will remain on thereafter. key is turned to the “ON” position. After
The light comes on or starts flashing a few seconds, the light will go off.
while driving. If the light is flashing, we recommend that
you replace the engine oil at an early If your engine coolant temperature is cool
(m) Low Windshield Washer Fluid Level opportunity depending on the driving and with the ignition switch on, the low engine
Warning Light road conditions. If the light comes on, coolant temperature indicator light comes
The light warns that the windshield washer replace it as soon as possible. on. If it keeps lighting on with the engine
fluid level is too low. Add washer fluid at The system must be reset after the fully warmed, contact your Toyota dealer
your earliest opportunity. (For instructions, engine oil replacement. Reset the system as soon as possible to service the ve-
see “Adding washer fluid” on page 276 in by the following procedure: hicle.
Section 7−3.) If the high engine coolant temperature
1. Turn the ignition key to the “OFF” posi-
The light operates to warn that the engine tion with the trip A reading shown. (For warning light flashes, your engine is too
is almost overheating. details, see “Odometer and two trip hot. If your vehicle overheats, stop your
(n) Engine Oil Replacement Reminder meters” on page 104 in this Section.) vehicle and allow the engine to cool.
Light (Except for Canada) 2. Turn the ignition key to the “ON” posi- Your vehicle may overheat during severe
This light acts as a reminder to replace tion while holding down the trip meter operating conditions, such as:
the engine oil. reset knob. Driving up a long hill on a hot day.
This light will come on when the ignition Hold down the knob for at least 5 Reducing speed or stopping after high
key is turned to “ON” and will go off after seconds. The indicator light flashes and speed driving.
about a few seconds. the bars displayed in the odometer Idling for a long period with the air
disappear gradually. The odometer conditioning on in stop−and−go traffic.
indicates “000000” and the light goes off.
112 2007 YARIS S/D from Jan. ’06 Prod. (OM52646U)
05 12.06
SECTION 1− 7
OPERATION OF INSTRUMENTS AND
CONTROLS
Ignition switch, Transmission and Parking brake
Ignition switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Automatic transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Manual transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Cruise control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Ignition switch
“LOCK”—Engine is off and the steering
wheel is locked. The key can be re- CAUTION
moved only at this position.
For manual transmission:
You must push in the key to turn the key
from “ACC” to the “LOCK” position. On Never remove the key when the ve-
vehicles with an automatic transmission, hicle is moving, as this will lock the
PS17501 the selector lever must be put in the “P”
position before pushing the key.
steering wheel and result in loss of
steering control.
Vehicles with engine immobilizer system—
Once you remove the key, the engine im- NOTICE
mobilizer system is automatically set. (See
“Engine immobilizer system” on page 13 Do not leave the key in the “ON”
in Section 1−2.) position if the engine is not running.
“START”—Starter motor on. The key When starting the engine, the key may The battery will discharge and the
will return to the “ON” position when seem stuck at the “LOCK” position. To ignition could be damaged.
released. free it, first be sure the key is pushed all
the way in, and then rock the steering
For starting tips, see Section 3.
wheel slightly while turning the key gently.
“ON”—Engine on and all accessories
Approximately five hours after the engine
on.
is turned off, you may hear sound coming
This is the normal driving position. from underneath the luggage compartment
“ACC”—Accessories such as the radio for several minutes. This is normal opera-
operate, but the engine is off. tion and does not indicate a malfunction.
(See “Leak detection pump” on page viii.)
If you leave the key in the “ACC” or
“LOCK” position and open the driver’s It is not a malfunction if the needles on
door, a buzzer will remind you to remove all meters move slightly when the key is
the key. turned to the “ACC”, “ON” or “START”
position.
Automatic transmission
Your automatic transmission has a shift
lock system to minimize the possibility of
incorrect operation. This means you can
only shift out of “P” position when the
brake pedal is depressed (with the ignition
switch in “ON” position).
Selector lever
(a) Selector lever
P: Parking, engine starting and key re-
moval
R: Reverse
N: Neutral
D: Normal driving (shifting into overdrive
US17001 possible)
3: Engine braking (shifting into overdrive
not possible)
2: Stronger engine braking
L: Maximum engine braking
With the brake pedal depressed
(The ignition switch must be in
“ON” position.)
Shift normally
(b) Normal driving (c) Using engine braking (d) Using “2” and “L” positions
1. Start the engine as instructed in “How To use engine braking, you can downshift The “2” and “L” positions are used for
to start the engine” in Section 3. The the transmission as follows: strong engine braking as described pre-
transmission must be in “P” or “N”. Shift into the “3” position. The trans- viously.
2. With your foot holding down the brake mission will downshift to third gear and With the selector lever in “2” or “L”, you
pedal, shift the selector lever to “D”. engine braking will be enabled. can start the vehicle in motion as with the
When the lever is in the “D” position, the Shift into the “2” position. The trans- lever in “D”.
automatic transmission system will select mission will downshift to second gear With the selector lever in “2”, the vehicle
the most suitable gear for running condi- when the vehicle speed drops down to will start in first gear and automatically
tions such as normal cruising, hill climb- or lower than 86 km/h (53 mph), and shift to second gear.
ing, hard towing, etc. stronger engine braking will be en- With the selector lever in “L”, the trans-
Always use the “D” position for better fuel abled. mission is engaged in first gear.
economy and quieter driving. If the engine Shift into the “L” position. The trans-
coolant temperature is low, the transmis- mission will downshift to first gear
sion will not shift into overdrive gear even when the vehicle speed drops down to
in the “D” position. or lower than 43 km/h (26 mph), and
maximum engine braking will be en-
CAUTION abled.
(f) Parking
NOTICE CAUTION
1. Bring the vehicle to a complete stop.
Be careful not to over−rev the en-
2. Pull the parking brake lever up fully to Always keep your foot on the brake
gine. Watch the tachometer to keep
securely apply the parking brake. pedal while stopped with the engine
engine rpm from going into the red
3. With the brake pedal pressed down, running. This prevents the vehicle
zone. The approximate maximum al-
shift the selector lever to the “P” posi- from creeping.
lowable speed for each position is
given below for your reference: tion.
“2” . . . . . . . . . . . . 103 km/h (64 mph) NOTICE
CAUTION
“L” . . . . . . . . . . . . . 56 km/h (34 mph)
Always use the brake pedal or the
Do not continue hill climbing or Never attempt to move the selector parking brake to hold the vehicle on
hard towing for a long time in the lever into “P” position under any cir- an upgrade. Do not attempt to hold
“2” or “L” position. This may cause cumstances while the vehicle is mov- the vehicle using the accelerator ped-
severe automatic transmission dam- ing. Serious mechanical damage and al, as this can cause the transmission
age from overheating. To prevent loss of vehicle control may result. to overheat.
such damage, “D” or “3” position
should be used in hill climbing or
(g) Good driving practice (h) If you cannot move the selector le-
hard towing.
If the transmission repeatedly shifts up ver out of “P” position
(e) Backing up and down between third gear and over- If you cannot shift the selector lever from
drive gears when climbing a gentle the “P” position even though the brake
1. Bring the vehicle to a complete stop. slope, shift the selector lever to the “3” pedal is depressed, use the shift lock
2. With the brake pedal held down with position. Be sure to shift the selector override button. For instructions, see “If
your foot, shift the selector lever to the lever to the “D” position immediately you cannot shift automatic transmission
“R” position. afterward. selector lever” on page 233 in Section 4.
When towing a trailer, in order to main-
NOTICE tain engine braking efficiency, do not
Never shift into reverse while the ve- use “D” position. The selector lever
hicle is moving. must be in the “3” position.
Manual transmission
Low altitude Downshift to the appropriate gear if accel-
—1219 m (4000 ft.) or lower eration is needed when you are cruising
gear km/h (mph) below the above downshifting speeds.
1 to 2 or 2 to 1 24 (15)
Upshifting too soon or downshifting too
2 to 3 or 3 to 2 40 (25)
late will cause lugging, and possibly ping-
3 to 4 or 4 to 3 64 (40)
ing. Regularly revving the engine to maxi-
US17002 4 to 5 / 5 to 4
High altitude
72/64 (45/40)
mum speed in each gear will cause ex-
cessive engine wear and high fuel
—Higher than 1219 m (4000 ft.) consumption.
Upshifting
gear km/h (mph) Maximum allowable speeds
1 to 2 24 (15) To get on a highway or to pass slower
2 to 3 64 (40) traffic, maximum acceleration may be nec-
3 to 4 75 (47) essary. Make sure you observe the follow-
The shift pattern is conventional as 4 to 5 87 (54) ing maximum allowable speeds in each
shown above. Downshifting gear:
Press the clutch pedal down fully while gear km/h (mph) gear km/h (mph)
shifting, and then release it slowly. Do not 2 to 1 24 (15) 1 51 (31)
rest your foot on the pedal while driving, 3 to 2 40 (25) 2 95 (59)
because it will cause clutch trouble. Do 4 to 3 64 (40) 3 139 (86)
not use the clutch to hold the vehicle 5 to 4 64 (40)
when stopped on an uphill grade—use the NOTICE
parking brake.
Do not downshift if you are going
Recommended shifting speeds faster than the maximum allowable
The transmission is fully synchronized and speed for the next lower gear.
upshifting or downshifting is easy.
For the best compromise between fuel
economy and vehicle performance, you
should upshift or downshift at the following
speeds:
120 2007 YARIS S/D from Jan. ’06 Prod. (OM52646U)
05 12.06
Parking brake
Good driving practice When parking, firmly apply the parking
If it is difficult to shift into reverse, put brake to avoid inadvertent creeping.
the transmission in neutral, release the To set: Pull up the lever. For better hold-
clutch pedal momentarily, and then try ing power, first depress the brake pedal
again. and hold it while setting the parking
When towing a trailer, in order to main- brake.
tain engine braking efficiency, do not PS17504 To release: Pull up the lever slightly (1),
press the thumb button (2), and lower (3).
use fifth gear.
To remind you that the parking brake is
CAUTION set, the parking brake reminder light in
the instrument panel remains on until you
Be careful when downshifting on a release the parking brake.
slippery surface. Abrupt shifting
could cause the vehicle to skid or Type A CAUTION
spin.
Before driving, be sure the parking
brake is fully released and the park-
NOTICE ing brake reminder light is off.
Do not use any gears other than
first gear when starting off and
moving forward. Doing so may dam-
age the clutch. PS17505
Make sure the vehicle is completely
stopped before shifting into reverse.
Type B
Cruise control
(on some models)
The cruise control is designed to main-
tain a set cruising speed without requir- CAUTION
ing the driver to operate the accelera-
tor. Cruising speed can be set to any To avoid accidentally engaging the
speed above 40 km/h (25 mph). cruise control, turn the system off
when it is not in use. Make sure the
Within the limits of the engine’s capabili-
ties, cruising speed can be maintained up
or down grades. However, changes in ve-
US17003a “CRUISE” indicator light is off.
CAUTION
If the cruise control automatically cancels RESETTING TO A SLOWER SPEED CRUISE CONTROL FAILURE WARNING
out other than for the above cases, have Push the lever down in the “− SET” direc- If the “CRUISE” indicator light flashes
your vehicle checked by your Toyota deal- tion and hold it. Release the lever when when using the cruise control, press the
er at the earliest opportunity. the desired speed is attained. While the “ON−OFF” button to turn the system off
RESUMING THE CRUISE CONTROL lever is held down, the vehicle speed will and then press it again to turn it on.
If the cruise control is temporarily can- gradually decrease. If any of the following conditions then oc-
celled, the cruising speed can be resumed However, a faster way to reset is to de- curs, there is some trouble in the cruise
by pushing the lever up in the “+ RES” press the brake pedal and then push the control system.
direction. lever down in the “− SET” direction. The indicator light does not come on.
Vehicle speed must be above 40 km/h (25 On vehicles with automatic transmission, The indicator light flashes again.
mph). even if you turn off the overdrive switch,
with the cruise control on, engine braking The indicator light goes out after it
RESETTING TO A FASTER SPEED comes on.
will not be applied because the cruise
Push the lever up in the “+ RES” direction control is not cancelled. To decrease the If this is the case, contact your Toyota
and hold it. Release the lever when the vehicle speed, reset to a slower speed dealer and have your vehicle inspected.
desired speed is attained. While the lever with the cruise control lever or depress
is held up, the vehicle will gradually gain the brake pedal. If you use the brake
speed. pedal, cruise control is cancelled.
However, a faster way to reset is to ac-
celerate the vehicle and then push the
lever down in the “− SET” direction.
SECTION 1− 8
OPERATION OF INSTRUMENTS AND
CONTROLS
Audio system
Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Using your audio system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
AUX adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Audio system operating hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
For details about your system’s tone and a stereo recording or broadcast, changing
NOTICE
balance controls, see the description of the right/left balance will increase the vol-
your own system. ume of one group of sounds while de- Never try to disassemble or oil any
creasing the volume of another. part of the compact disc player. Do
SRS not insert anything other than com-
YOUR RADIO ANTENNA
Type 1 and 2 audio systems utilize SRS pact discs into the slot.
Your vehicle has an antenna printed on
FOCUS and SRS TruBass audio the inside of the rear window.
enhancement technologies, under license
from SRS Labs, Inc., in all mode except NOTICE
AM radio mode.
FOCUS, TruBass, SRS and symbol are trademarks of
Putting a film (especially a conductive
SRS Labs, Inc. or metallic film) on the rear window
FOCUS and TruBass technologies are incorporated under will noticeably reduce the sensitivity
license from SRS Labs, Inc.
of the radio.
Tone
How good an audio program sounds to
you is largely determined by the mix of
the treble and bass levels. In fact, differ-
ent kinds of music and vocal programs
usually sound better with different mixes
of treble and bass.
US18006a
DISC·AUX (Compact disc) “ERROR 4”: Over−current. Ask your FM1 FM2
Push the “DISC·AUX” button to play a Toyota dealer to inspect. Push the “FM1” or “FM2” button to turn on
compact disc. “CD OPEN”: The compact disc changer the radio and select the FM band. “FM1”
When the audio system is set to compact lid of separate unit is open. Close the or “FM2” will appear on the display. This
disc operation, the display shows the compact disc changer lid. system allows you to set twelve FM sta-
track, number currently being played. “NO MUSIC”: The disc with no mp3/wma tions, two for each of the preset button.
Vehicles with AUX adapter— data has been inserted. Remove the disc PWR·VOL (Power and Volume)
from the player and insert a mp3/wma Push “PWR·VOL” to turn the audio system
To switch between CD and AUX (external data disc.
device) modes, press the “DISC·AUX” but- on and off. Turn “PWR·VOL” to adjust the
ton. The AUX mode is only available when If the malfunction still exists, take your volume.
AUX adapter is connected to the system. vehicle to your Toyota dealer.
When the AUX adapter is in use, “AUX” DISC
will appear on the display. With compact disc changer only—
Error messages Use these buttons to select a disc you
If the player malfunctions, your audio sys- want to listen to.
tem will display following error messages. Push “” (preset button 3) or “” (preset
“WAIT”: The compact disc player unit button 4) until the number of the disc you
may be too hot. Allow the player to cool want to listen appears on the display.
down. FOLDER (Folder up/down)
“ERROR 1”: The disc may be dirty, dam- To skip up or down to a different folder:
aged or inserted incorrectly (up−side Push either side of the “FOLDER” several
down). Clean the disc and re−insert it. times until the number of the folder you
“NO DISC”: The compact disc changer of want to listen to appears on the display.
separate unit is empty. Insert a disc. To jump to the first file in the current
“ERROR 3”: There is a problem inside folder:
the system. Eject the disc or magazine. Push and hold “” side of the button until
Set the disc or magazine again. you hear a beep.
MP3/WMA Player
This button is used to change the display
for the MP3/WMA file that contains text
data.
To change the display, quickly push and
release the “TEXT” while the MP3/WMA
file is playing. The display changes in the
order from the elapsed time to folder
name to file name to album title (MP3 file
only) to track title to artist name, then
back to the elapsed time.
If this button is pushed while a MP3/WMA
file that does not contain text data is play-
ing, “NO TITLE” will appear on the dis-
play.
If the entire text data is not displayed,
push and hold it until you hear a beep.
The rest of the text data will appear.
TUNE·FILE (Tuning and File up/down)
Radio
Turn the knob clockwise to step up the
frequency. Turn the knob counterclockwise
to step down the frequency.
MP3/WMA Player
Turn the knob clockwise to file up. Turn
the knob counterclockwise to file down.
Type 2
Details of specific buttons, controls and
features are described in the alphabetical
list that follows.
PS18505
DISC·AUX (Compact disc) “ERROR 4”: Over−current. Ask your FOLDER (Folder up/down)
Push the “DISC·AUX” button to play a Toyota dealer to inspect. To skip up or down to a different folder:
compact disc. “CD OPEN”: The compact disc changer Push either side of the “FOLDER” several
When the audio system is set to compact lid of separate unit is open. Close the times until the number of the folder you
disc operation, the display shows the compact disc changer lid. want to listen to appears on the display.
track, number currently being played. “NO MUSIC”: The disc with no mp3/wma To jump to the first file in the current
Vehicles with AUX adapter— data has been inserted. Remove the disc folder:
from the player and insert a mp3/wma Push and hold “” side of the button until
To switch between CD, DVD and AUX data disc. you hear a beep.
(external device) modes, press the
“DISC·AUX” button. The AUX mode is only If the malfunction still exists, take your FM1 FM2
available when AUX adapter is connected vehicle to your Toyota dealer. Push the “FM1” or “FM2” button to turn on
to the system. When the AUX adapter is DISC the radio and select the FM band. “FM1”
in use, “AUX” will appear on the display. With compact disc changer only— or “FM2” will appear on the display. This
Error messages system allows you to set twelve FM sta-
Use these buttons to select a disc you tions, two for each of the preset button.
If the player malfunctions, your audio sys- want to listen to.
tem will display following error messages. PWR·VOL (Power and Volume)
Push “” (preset button 3) or “” (preset
“WAIT”: The compact disc player unit button 4) until the number of the disc you Push “PWR·VOL” to turn the audio system
may be too hot. Allow the player to cool want to listen appears on the display. on and off. Turn “PWR·VOL” to adjust the
down. volume.
“ERROR 1”: The disc may be dirty, dam-
aged or inserted incorrectly (up−side
down). Clean the disc and re−insert it.
“NO DISC”: The compact disc changer of
separate unit is empty. Insert a disc.
“ERROR 3”: There is a problem inside
the system. Eject the disc or magazine.
Set the disc or magazine again.
AUX adapter
MP3/WMA Player If you install an audio system other than
This button is used to change the display a genuine audio system, you will not be
for the MP3/WMA file that contains text able to use the AUX adapter.
data.
To change the display, quickly push and
release the “TEXT” while the MP3/WMA
file is playing. The display changes in the US18007b
order from the elapsed time to folder
name to file name to album title (MP3 file
only) to track title to artist name, then
back to the elapsed time.
If this button is pushed while a MP3/WMA
file that does not contain text data is play-
ing, “NO TITLE” will appear on the dis- An AUX adapter is installed in the cen-
play. ter pocket.
If the entire text data is not displayed, By inserting a mini plug into the AUX
push and hold it until you hear a beep. adapter, you can listen to music from a
The rest of the text data will appear. portable audio device through the vehicle’s
TUNE·FILE (Tuning and File up/down) speaker system.
Radio To use the AUX adapter, switch to the
AUX mode (external device mode) by
Turn the knob clockwise to step up the pressing the “DISC·AUX” button. When the
frequency. Turn the knob counterclockwise AUX adapter is in use, “AUX” will appear
to step down the frequency.
on the display. To adjust the volume, turn
MP3/WMA Player the “PWR·VOL” knob.
Turn the knob clockwise to file up. Turn When using a portable audio device con-
the knob counterclockwise to file down. nected to the power outlet or cigarette
lighter, noise may occur during playback.
If this happens, use the power source of
the portable audio device.
2007 YARIS S/D from Jan. ’06 Prod. (OM52646U) 141
05 12.06
Transparent/translucent discs
NOTICE
Do not use special shaped, transpar-
ent/translucent, low quality or labeled
discs such as those shown in the il-
lustrations. The use of such discs
Z17039 may damage the player or changer, or
it may be impossible to eject the
Z17052
discs.
Correct Wrong
There is no compatibility with the MP3i The turn of play of the compact disc
(MP3 interactive) or mp3PRO format. having the structure shown on the left
The MP3/WMA player is compatible is as follows:
with VBR (Variable Bit Rate). Folder 1 001 002 . . . 011
When playing back files recorded as 001
VBR (Variable Bit Rate) files, the play
Folder 2
time will not be correctly displayed if
002
fast−forward or reverse operations are The order changes depending on the
used. 003 PC and MP3/WMA encoding software
004 you use.
It is not possible to check folders that
005
do not include MP3/WMA files.
MP3 files in up to 8 tiers of folders Folder 3
can be played back. However, there is 006
a delay in the start of playback on
discs with numerous tiers. For this rea-
18i023 Folder
son we recommend creating discs with Folder 4
no more than 2 tiers. 007
It is possible to play back up to 255 Folder 5
files on one disc. 008
It is possible to play back up to 192 Folder 6
folders on one disc. 009
Folder 7
010
Folder 8
011
: MP3/WMA file
CD−R and CD−RW discs The MP3/WMA player conforms to the TERMS
CD−R/CD−RW discs that have not been track skip function of the CD−R/CD− Packet write—
subject to the “finalizing process” (a RW disc.
This is a general term for a method of
process that allows them to be played If you insert a CD−RW disc into the writing on CD−R, etc. at the time required
back on a conventional CD player) MP3/WMA player, load time to play- for a file, just as is done with files on
cannot be played back. back will be longer than for a conven- floppy or hard discs.
It may not be possible to play back tional CD or CD−R disc.
Bit rate—
CD−R/CD−RW discs recorded on a mu- Read the precautions accompanying
sic CD recorder or a personal comput- the CD−R/CD−RW discs before use. This expresses data volume per second,
or bps units (bits per second). The higher
er because of disc characteristics, Recordings on CD−R/CD−RW cannot the rate, the more information is available
scratches or dirt on the disc, or dirt, be played back using the DDCD
condensation, etc. on the lens of this to reproduce the sound. Using the same
(Double Density CD) system. encoding methods (such as MP3/WMA),
unit.
the higher the rate, the better the sound.
Playback of discs recorded on a per-
sonal computer may not be possible Multi−session—
depending on the application settings Multi−session is a recording method that
and the environment. Record with the allows additional data to be recorded later.
correct format. (For details, contact the When recording data on a CD−ROM,
manufacturer of the applications.) CD−R or CD−RW, etc., all data from be-
Playback of CD−R/CD−RW discs may ginning to end is treated as a single unit
become impossible in case of direct or session. Multi−session is a method of
exposure to sunlight, high tempera- recording more than 2 sessions in one
tures, or the storage conditions in the disc.
vehicle. CD−DA—
Titles and other text information re- CD−DA is an abbreviation of Compact
corded on a CD−R/CD−RW disc may Disc Digital Audio. It refers to the uncom-
not be displayed by the MP3/WMA pressed format of regular CDs.
player (in the case of audio data (CD−
DA)).
The file name is in 8.3 format (the name MP3 is short for MPEG 1 & 2 Audio Layer
consists of up to 8 characters, half−byte 3. It is an audio compression standard set
English capital letters and half−byte nu- by a working group (MPEG) of the ISO
merals and the “−” sign, with a file exten- (International Standards Organization).
sion of three characters.) MP3 is able to compress audio data to
about 1/10 the level of a conventional
disc.
SECTION 1− 9
OPERATION OF INSTRUMENTS AND
CONTROLS
Air conditioning system
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Air flow selector settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Operating tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Instrument panel vents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Air conditioning filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Controls
1. Air intake selector
2. Fan speed selector
3. Temperature selector
4. Air flow selector
5. “A/C” Button (on some models)
US19001
PS19502
: on some models
US19009 US19011
Side vents
The air conditioning filter information
label is placed inside of the glove box
as shown and indicates that a filter has
been installed.
The air conditioning filter prevents dust
from entering the vehicle through the air
conditioning vent.
US19010
Center vents
2. Push in each side of the glove box 3. Pinch the knobs located on each 4. Pull out the filter and rotate it as
to disconnect the claws. side and remove the filter cover. shown in the illustration to remove.
Inspect the filter on the surface.
If it is dirty, it should be replaced.
PS19514
INFORMATION
The air filter should be installed prop-
erly in position. The use of air condi-
tioning with the air filter removed
may cause deteriorated dustproof per-
formance and then affect air condi-
tioning performance.
SECTION 1− 10
OPERATION OF INSTRUMENTS AND
CONTROLS
Other equipment
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Cigarette lighter and portable ashtray . . . . . . . . . . . . . . . . . . . . . . . . . 162
Power outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Glove box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Auxiliary box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Rear console box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Cup holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Bottle holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Luggage storage box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Floor mat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
US10001 US10002
Power outlet
CAUTION
When finished with your cigarette, thor- The key must be in the “ACC” or “ON”
oughly extinguish it in the ashtray to pre- position for the power outlet to be used.
vent other cigarette butts from catching
fire. After using the ashtray, close the lid
completely.
To remove the ashtray, pull it out from the
front cup holder.
US10007
CAUTION
Bottle holders
CAUTION
To use the luggage storage box, open it Use a floor mat of the correct size.
as shown above. If the vehicle carpet and floor mat have
two holes, then they are designed for use
CAUTION with two locking clips. Attach the floor mat
to the vehicle carpet using the clips. Lock
To reduce the chance of injury in the clips into the holes in the vehicle
case of an accident or a sudden stop, carpet.
always keep the luggage storage
boxes closed while driving.
PS10518
CAUTION
SECTION 2
INFORMATION BEFORE DRIVING YOUR
TOYOTA
Information before driving your Toyota
Break−in period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Fuel pump shut off system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Operation in foreign countries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Three−way catalytic converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Engine exhaust cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Facts about engine oil consumption . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Iridium−tipped spark plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Brake system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Electric power steering system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Brake pad wear limit indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Your Toyota’s identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Theft prevention labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Suspension and chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Tire information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Vehicle load limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Cargo and luggage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Types of tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Fuel pump shut off system Operation in foreign countries Three−way catalytic converter
The fuel pump shut off system stops sup- If you plan to drive your Toyota in
plying fuel to the engine to minimize the another country...
risk of fuel leakage when the engine stalls First, comply with the vehicle registration
or an airbag inflates upon collision. To laws.
restart the engine after the fuel pump shut
off system activates, turn the ignition Second, confirm the availability of the cor-
switch to “ACC” or “LOCK” once and start
it.
rect fuel (unleaded and minimum octane
number). US21003
CAUTION
CAUTION
NOTICE
Failure to check the oil level regularly
could lead to serious engine trouble
due to insufficient oil.
Brake system
The tandem master cylinder brake system Effective way to press the ABS brake
is a hydraulic system with two separate CAUTION
pedal:
sub−systems. If either sub−system should When the anti−lock brake system func-
fail, the other will still work. However, the Do not pump the brake pedal if the
tion is in action, you may feel the brake
pedal will be harder to press, and your engine stalls. Each push on the
pedal uses up your reserved vacu- pedal pulsating and hear a noise. In this
stopping distance will increase. Also, the situation, to let the anti−lock brake sys-
brake system warning light may come on. um.
tem work for you, just hold the brake
Even if the power assist is com- pedal down more firmly. Do not pump
CAUTION pletely lost, the brakes will still the brake in a panic stop. This will re-
work. But you will have to push the sult in reduced braking performance.
Do not drive your vehicle with only a pedal hard, much harder than nor-
single brake system. Have your mal. And your braking distance will The anti−lock brake system becomes op-
brakes fixed immediately. increase. erative after the vehicle has accelerated
to a speed in excess of approximately 10
km/h (6 mph). It stops operating when the
BRAKE BOOSTER ANTI−LOCK BRAKE SYSTEM (with
vehicle decelerates to a speed below
The brake booster uses engine vacuum to “ABS” warning light)
approximately 5 km/h (3 mph).
power−assist the brakes. If the engine The anti−lock brake system is designed
Depressing the brake pedal on slippery
should quit while you are driving, you can to help prevent lock−up of the wheels
road surfaces such as on a manhole cov-
bring the vehicle to a stop with normal during a sudden braking or braking on
er, a steel plate at a construction site,
pedal pressure. There is enough reserved slippery road surfaces. This assists in
joints in a bridge, etc. on a rainy day
vacuum for one or two stops—but no providing directional stability and steer-
tends to activate the anti−lock brake sys-
more! ing performance of the vehicle under
tem.
these circumstances.
You may hear a click or motor sound in
the engine compartment for a few seconds
when the engine is started or just after
the vehicle begins to move. This means
that the anti−lock brake system is in the
self−check mode, and does not indicate a
malfunction.
NOTICE
The vehicle identification number (VIN) is The engine number is stamped on the
also on the Certification Label. engine block as shown. You should not attempt to remove the
theft prevention labels as it may vio-
late certain state or federal laws.
CAUTION
Tire information—
—Tire symbols (Standard tire)
This illustration indicates typical tire
symbols.
1. Tire size—For details, see “Tire
size” on page 187.
2. DOT and Tire Identification
Number (TIN)—For details, see
“DOT and Tire Identification Num-
ber (TIN)” on page 186.
3. Location of tread wear indica-
tors—For details, see “Checking
and replacing tires” on page 264.
4. Tire ply composition and mate-
PS21505 rials—Plies mean a layer of rub-
ber−coated parallel cords. Cords
mean the strands forming the plies
in the tire.
5. Radial tires or bias−ply tires—A
radial tire has “RADIAL” on the
sidewall. A tire not marked with
“RADIAL” is a bias−ply tire.
6. “TUBELESS” or “TUBE
TYPE”—A tubeless tire does not
have a tube inside the tire and air
is directly filled in the tire. A tube
type tire has a tube inside the tire
and the tube maintains the air
pressure.
7. Load limit at maximum cold tire
inflation pressure—For details,
see “Checking and replacing tires”
on page 264.
8. Maximum cold tire inflation
pressure—This means the pres-
sure to which a tire may be in-
flated. For recommended cold tire
inflation pressure, see “Tires” on
page 285.
9. Summer tire or all season
tire—An all season tire has “M+S”
on the sidewall. The tire not
marked with “M+S” is a summer
tire. For details, see “Types of
tires” on page 196.
10.Uniform tire quality grading—
For details, see “Uniform tire quali-
ty grading” that follows.
PS21507 SU21026a
CAUTION
Types of tires
217 kg – 176 kg = 41 kg. Determine what kind of tires your
(479 lb. – 388 lb. = 91 lb.) CAUTION vehicle is originally equipped with.
As shown in the above example, if the Even if the total load of occu- 1. Summer tires
number of occupants increases, the pant’s weight and the cargo load Summer tires are high−speed capabil-
cargo and luggage load equaling the is less than the total load capac- ity tires best suited to highway driving
combined weight of occupants who ity, do not apply the load uneven- under dry conditions.
got on later must be reduced. In other ly. That may cause not only dam-
words, if the increase in the number Since summer tires do not have the
age to the tire but also deteriora- same traction performance as snow
of occupants causes the excess of tion to the steering ability due to
the total load capacity (combined tires, summer tires are inadequate for
unbalance of the vehicle, causing driving on snow−covered or icy roads.
weight of occupants plus cargo and an accident.
luggage load), you have to reduce the For driving on snow−covered or icy
cargo and luggage on your vehicle. roads, we recommend using snow
tires. If installing snow tires, be sure
For details about total load capacity, to replace all four tires.
see “Vehicle load limits” on page 193.
2. All season tires
All season tires are designed to pro-
vide better traction in snow and to be
adequate for driving in most winter
conditions, as well as for use all year
round.
CAUTION
SECTION 3
STARTING AND DRIVING
Starting and driving
Before starting the engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
How to start the engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
Tips for driving in various conditions . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Winter driving tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Dinghy towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Trailer towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
How to save fuel and make your vehicle last longer . . . . . . . . . . . . . 210
Dinghy towing
(with automatic transmission)
Check the condition of the battery and
NOTICE
cables.
Cold temperatures reduce the capacity of Do not use engine antifreeze or any
any battery, so it must be in top shape other substitute because it may dam-
to provide enough power for winter start- age your vehicle’s paint.
ing. Section 7−3 tells you how to visually
inspect the battery. Your Toyota dealer
and most service stations will be pleased
Do not use your parking brake when US31001
there is a possibility it could freeze.
to check the level of charge.
When parking, put the transmission into
Make sure the engine oil viscosity is “P” (automatic) or into first or reverse
suitable for the cold weather. (manual) and block the rear wheels. Do
See Section 7−2 for recommended viscos- not use the parking brake, or snow or
ity. Leaving a heavy summer oil in your water accumulated in and around the
vehicle during winter months may cause parking brake mechanism may freeze, Your vehicle is not designed to be
harder starting. If you are not sure about making it hard to release. dinghy towed (with four wheels on the
which oil to use, call your Toyota deal- Keep ice and snow from accumulating ground) behind a motorhome.
er—they will be pleased to help. under the fenders.
Keep the door locks from freezing. NOTICE
Ice and snow built up under your fenders
Squirt lock de−icer or glycerine into the can make steering difficult. During bad Do not tow your vehicle with four
locks to keep them from freezing. winter driving, stop and check under the wheels on the ground. This may
fenders occasionally. cause serious damage to your vehicle.
Use a washer fluid containing an anti-
freeze solution. Depending on where you are driving,
we recommend you carry some emer-
This product is available at your Toyota
gency equipment.
dealer and most auto parts stores. Follow
the manufacturer’s directions for how Some of the things you might put in the
much to mix with water. vehicle are tire chains, window scraper,
bag of sand or salt, flares, small shovel,
jumper cables, etc.
Dinghy towing
(with manual transmission)
DINGHY TOWING TIPS
Before dinghy towing, be sure to ob-
serve the following in order to reduce
the damage to your vehicle.
1. Put the shift lever in neutral.
NOTICE
To avoid the locking of the steering
wheel, turn the ignition switch to the
Your vehicle can be dinghy towed (with
“ACC” position. NOTICE
four wheels on the ground) from the
front behind a motorhome. Do not tow your vehicle from the
3. Release the parking brake.
rear. This may cause serious damage
CAUTION After dinghy towing, let the engine idle for to your vehicle.
more than 3 minutes before driving the
Dinghy towing requires special equip- vehicle.
ment and accessories. Please refer to
your service outlet of the motorhome
manufacture for the recommended
equipment.
NOTICE
Dinghy towing does not eliminate the
possibility of damage to your vehicle.
Because stopping distance may be in- Crosswinds and rough roads will ad- Because of the added load of the trail-
creased, vehicle−to−vehicle distance versely affect handling of your vehicle er, your vehicle’s engine may overheat
should be increased when towing a and trailer, causing sway. Pay attention on hot days (at temperatures over
trailer. For each 16 km/h (10 mph) of to the rear from time to time to pre- 30°C [85°F]) when going up a long or
speed, allow at least one vehicle and pare yourself for being passed by large steep grade with a trailer. If the engine
trailer length between you and the ve- trucks or buses, which may cause your coolant temperature gauge indicates
hicle ahead. Avoid sudden braking as vehicle and trailer to sway. If swaying overheating, immediately turn off the air
you may skid, resulting in jackknifing happens, firmly grip the steering wheel conditioning (if in use), pull off the road
and loss of control. This is especially and reduce speed immediately but and stop in a safe spot. Refer to “If
true on wet or slippery surfaces. gradually. Never increase speed. Steer your vehicle overheats” on page 218 in
Avoid jerky starts or sudden accelera- straight ahead. If you make no extreme Section 4
tion. If your vehicle has a manual correction with the steering or brakes, Always place wheel blocks under both
transmission, prevent excessive clutch the vehicle and trailer will stabilize. the vehicle and trailer wheels when
slippage by keeping engine rpm low Be careful when passing other ve- parking. Apply the parking brake firmly.
and not racing the engine. Always start hicles. Passing requires considerable Put the transmission in “P” (automatic)
out in first gear. distance. After passing a vehicle, do or in first or reverse (manual). Avoid
Avoid jerky steering and sharp turns. not forget the length of your trailer and parking on a slope with a trailer, but
The trailer could hit your vehicle in a be sure you have plenty of room be- if it cannot be avoided, do so only
tight turn. Slow down before making a fore changing lanes. after performing the following:
turn to avoid the necessity of sudden In order to maintain engine braking effi- 1. Apply the brakes and hold.
braking. ciency, do not use fifth gear (manual) 2. Have someone place wheel blocks un-
Remember that when making a turn, or do not put the transmission in “D” der both the vehicle and trailer wheels.
the trailer wheels will be closer than (automatic).
3. When the wheel blocks are in place,
the vehicle wheels to the inside of the release your brakes slowly until the
turn. Therefore, compensate for this by blocks absorb the load.
making a larger than normal turning
radius with your vehicle. 4. Apply the parking brake firmly.
5. Shift into first or reverse (manual) or
“P” (automatic) and turn off the engine.
Avoid long engine idling. If you have Maintain a moderate speed on high-
a long wait and you are not in traffic, ways. The faster you drive,the greater CAUTION
it is better to turn off the engine and the fuel consumption. By reducing your
start again later. speed, you will cut down on fuel con- Never turn off the engine to coast
down hills. Your power steering and
Avoid engine lugging or over−rev- sumption.
brake booster will not function with-
ving. Use a gear position suitable for Keep the front wheels in proper out the engine running. Also, the
the road on which you are travelling. alignment. Avoid hitting the curb and
emission control system operates
Avoid continuous speeding up and slow down on rough roads. Improper
properly only when the engine is run-
slowing down. Stop−and−go driving alignment not only causes faster tire
ning.
wastes fuel. wear but also puts an extra load on
the engine, which, in turn, wastes fuel.
Avoid unnecessary stopping and
braking. Maintain a steady pace. Try Keep the bottom of your vehicle free
to time the traffic signals so you only from mud, etc. This not only lessens
need to stop as little as possible or weight but also helps prevent corro-
take advantage of through streets to sion.
avoid traffic lights. Keep a proper dis- Keep your vehicle tuned−up and in
tance from other vehicles to avoid sud- top shape. A dirty air cleaner,
den braking. This will also reduce wear improper valve clearance, dirty plugs,
on your brakes. dirty oil and grease,brakes not
Avoid heavy traffic or traffic jams adjusted, etc. all lower engine
whenever possible. performance and contribute to poor fuel
economy. For longer life of all parts
Do not rest your foot on the clutch and lower operating costs, keep all
or brake pedal. This causes needless maintenance work on schedule, and if
wear, overheating and poor fuel econo- you often drive under severe
my. conditions, see that your vehicle
receives more frequent maintenance.
(For scheduled maintenance
information, please refer to the
“Scheduled Maintenance Guide” or
“Owner’s Manual Supplement”.)
2007 YARIS S/D from Jan. ’06 Prod. (OM52646U) 211
05 12.06
SECTION 4
IN CASE OF AN EMERGENCY
In case of an emergency
If your vehicle will not start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
If your engine stalls while driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
If you cannot increase engine speed . . . . . . . . . . . . . . . . . . . . . . . . . . 218
If your vehicle overheats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
If you have a flat tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
If your vehicle becomes stuck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
If your vehicle needs to be towed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
If you cannot shift automatic transmission selector lever . . . . . . . . 233
If you lose your keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Booster
LS40034 battery
LS40035 PS41501
Positive
terminal Discharged battery Booster
(“+” mark) Jumper Positive terminal Negative terminal battery
cable (“+” mark) (“−” mark)
Connecting point
4. Make the cable connections in the or- c. Connect the clamp of the negative
der a, b, c, d. (black) jumper cable to the negative (−)
terminal on the booster battery. Do not connect the cable to or near any
a. Connect the clamp of the positive
part that moves when the engine is
(red) jumper cable to the positive (+) d. Connect the clamp at the other end
cranked.
terminal on the discharged battery. of the negative (black) jumper cable to
b. Connect the clamp at the other end a solid, stationary, unpainted, metallic
point of the vehicle with the discharged CAUTION
of the positive (red) jumper cable to
the positive (+) terminal on the booster battery.
When making the connections, to
battery. The recommended connecting point is avoid serious injury, do not lean over
shown in the following illustration: the battery or accidentally let the
jumper cables or clamps touch any-
thing except the correct battery termi-
nals or the ground.
6. Start your engine in the normal way. 3. Turn the ignition key to “ACC” or
After starting, run it at about 2000 rpm “LOCK”, and try starting the engine
for several minutes with the accelerator again.
pedal lightly depressed. If the engine will not start, see “If your
7. Carefully disconnect the cables in the vehicle will not start” in this Section.
exact reverse order: the negative cable
and then the positive cable. CAUTION
8. Carefully dispose of the battery cover
If the engine is not running, the pow-
cloths—they may now contain sulfuric
er assist for the brakes and steering
acid.
will not work so steering and braking
9. If removed, replace all the battery vent will be much harder than usual.
plugs.
If the cause of your battery discharging is
not apparent (for example, lights left on),
you should have it checked at your Toyota
dealer.
If the first start attempt is not success-
ful...
Check that the clamp on the jumper
cables are tight. Recharge the discharged
battery with the jumper cables connected
for several minutes and restart your en-
gine in the normal way.
US41017 SM41002
Steel wheels
To remove the spare tire, loosen the 2. Block the wheel diagonally op-
bolt and remove it. posite the flat tire to keep the
Then take the spare tire out of the vehicle from rolling when it is 3. Remove the wheel ornament.
vehicle. jacked up. Pry off the wheel ornament, using the
When storing the spare tire, put it in When blocking the wheel, place a beveled end of the wheel nut wrench
place with the inner side of the wheel wheel block in front of one of the front as shown.
facing up. Then secure the tire by re- wheels or behind one of the rear
peating the above removal steps in wheels. CAUTION
reverse order to prevent it from flying
forward during a collision or sudden Do not try to pull off the orna-
braking. ment by hand. Take due care in
handling the ornament to avoid
unexpected personal injury.
CAUTION
4. Loosen all the wheel nuts. 5. Position the jack at the correct
Always loosen the wheel nuts before jack point as shown.
raising the vehicle. Make sure the jack is positioned on
The nuts turn counterclockwise to a level and solid place.
loosen. To get maximum leverage, fit
the wrench to the nut so that the han-
dle is on the right side, as shown
above. Grasp the wrench near the
end of the handle and pull up on the
handle. Be careful that the wrench
does not slip off the nut.
Do not remove the nuts yet—just un-
screw them about one−half turn.
CAUTION
6. After making sure that no one 7. Remove the wheel nuts and
is in the vehicle, raise it high change tires.
enough so that the spare tire Lift the flat tire straight off and put it
can be installed. aside.
Remember you will need more ground Roll the spare wheel into position and
clearance when putting on the spare align the holes in the wheel with the
tire than when removing the flat tire. bolts. Then lift up the wheel and get
To raise the vehicle, insert the jack at least the top bolt started through
handle into the jack (it is a loose fit) its hole. Wiggle the tire and press it
and turn it clockwise. As the jack back over the other bolts.
touches the vehicle and begins to lift,
double−check that it is properly posi-
tioned.
CAUTION
Before putting on wheels, remove any 8. Reinstall all the wheel nuts fin-
corrosion on the mounting surfaces ger tight.
with a wire brush or such. Installation Reinstall the wheel nuts (tapered end
of wheels without good metal−to−met- inward) and tighten them as much as
al contact at the mounting surface can you can by hand. Press back on the
cause wheel nuts to loosen and tire and see if you can tighten them
eventually cause a wheel to come off more.
while driving.
CAUTION
If towing is necessary, we recommend (a) Towing with wheel lift type truck Automatic transmission:
you to have it done by your Toyota From front—Release the parking brake. Use a towing dolly under the front
dealer or a commercial tow truck ser- wheels.
vice. In consultation with them, have NOTICE
your vehicle towed using either (a) or NOTICE
(b). When lifting wheels, take care to en-
sure adequate ground clearance for Never tow a vehicle with an automatic
Only when you cannot receive a towing
towing at the opposite end of the transmission from the rear with the
service from a Toyota dealer or com-
raised vehicle. Otherwise, the bumper front wheels on the ground, as this
mercial tow truck service, tow your ve-
and/or underbody of the towed vehicle may cause serious damage to the
hicle carefully in accordance with the
will be damaged during towing. transmission.
instructions given in “—Emergency
towing” in this Section.
From rear— (b) Using flat bed truck
Proper equipment will help ensure that
your vehicle is not damaged while being Manual transmission:
towed. Commercial operators are generally We recommend using a towing dolly
aware of the state/provincial and local under the front wheels. If you do not
laws pertaining to towing. use a towing dolly, place the ignition
Your vehicle can be damaged if it is key in the “ACC” position and put the
towed incorrectly. Although most operators transmission in neutral.
know the correct procedure, it is possible
to make a mistake. To avoid damage to NOTICE
your vehicle, make sure the following few Do not tow with the key removed or
precautions are observed. If necessary, in the “LOCK” position when towing
show this page to the tow truck driver. from the rear without a towing dolly.
TOWING PRECAUTIONS: The steering lock mechanism is not
Use a safety chain system for all towing, strong enough to hold the front
and abide by the state/provincial and local wheels straight.
laws. The wheels and axle on the ground
must be in good condition. If they are
damaged, use a towing dolly.
230 2007 YARIS S/D from Jan. ’06 Prod. (OM52646U)
05 12.06
—Emergency towing
If towing is necessary, we recommend
(c) Towing with sliding type you to have it done by your Toyota
truck
dealer or a commercial tow truck ser-
vice.
If a towing service is not available in
an emergency, your vehicle may be
US41003 US41004 temporarily towed by a cable or chain
secured to either the emergency towing
eyelet on the front of the vehicle or to
the right emergency towing eyelet un-
der the rear of the vehicle. Use extreme
caution when towing vehicles.
Vehicles with an automatic transmis-
Front sion, use only the front towing eyelet
(c) Towing with sling type truck
when towing your vehicle.
NOTICE To install the front towing eyelet, see
“—Installing front towing eyelet” on page
Do not tow with sling type truck, ei- 232 in this Section.
ther from the front or rear. This may
cause body damage. NOTICE
Only use specified towing eyelet;
US41005a otherwise your vehicle may be dam-
aged.
Vehicles with an automatic trans-
mission, never tow a vehicle from
the rear with four wheels on the
ground. This may cause serious
damage to the transmission.
Rear
NOTICE
Use only a cable or chain specifi-
cally intended for use in towing ve-
hicles. Securely fasten the cable or
chain to the towing eyelet provided.
Do not use the left rear eyelet. It is
not designed for towing.
2. Use the towing eyelet in the tool bag. 3. Tighten the front towing eyelet securely If you cannot shift the selector lever
Secure the front towing eyelet to the by a wheel nut wrench. out of “P” position to other positions
hole on the front bumper by turning even though the brake pedal is de-
clockwise. (For the tool bag storage CAUTION pressed, use the shift lock override but-
location, see “—Required tools and ton as follows:
spare tire” on page 222.) When installing the eyelet on the ve- 1. Turn the ignition key to “ACC” or
hicle, be sure to tighten the front “LOCK” position. Make sure the
eyelet securely. If the eyelet is loose, parking brake is applied.
it may come off when being towed
2. Pry up the cover with a flathead
and result in death or serious injury.
screwdriver or equivalent.
SECTION 5
CORROSION PREVENTION AND
APPEARANCE CARE
Corrosion prevention and appearance care
Protecting your Toyota from corrosion . . . . . . . . . . . . . . . . . . . . . . . . . 236
Washing and waxing your Toyota . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
Cleaning the interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
1. Rinse off loose dirt with a hose. Re- Exterior lights: Wash carefully. Do not use Automatic car wash
move any mud or road salt from the organic substances or scrub them with a Your vehicle may be washed in an auto-
underside of the vehicle or the wheel hard brush. This may damage the sur- matic car wash, but remember that the
wells. faces of the lights. paint can be scratched by some types of
2. Wash with a mild car−wash soap, Road tar: Remove with turpentine or brushes, unfiltered washing water, or the
mixed according to the manufacturer’s cleaners that are marked safe for painted washing process itself. Scratching reduces
instructions. Use a soft cotton mitt and surfaces. paint durability and gloss, especially on
keep it wet by dipping it frequently into 3. Rinse thoroughly—dried soap can darker colors. The manager of the car
the wash water. Do not rub hard—let cause streaking. In hot weather you wash should be able to advise you wheth-
the soap and water remove the dirt. may need to rinse each section right er the process is safe for the paint on
Fuel filler door: Do not apply water (high− after you wash it. your vehicle.
pressure car wash, for example) at or 4. To prevent water spots, dry the vehicle NOTICE
near the fuel tank inlet with the fuel filler using a clean soft cotton towel. Do not
door opened. If the water enters the air rub or press hard—you might scratch To prevent damage to the antenna,
vent, you may experience trouble with re- the paint. make sure to remove it before driving
fueling or rough engine idling. your Toyota through an automatic car
Plastic wheel ornaments: The plastic NOTICE wash.
wheel ornaments are damaged easily by
Do not use organic substances
organic substances. If any organic sub-
(gasoline, kerosene, benzine or
stance splash an ornament, be sure to
strong solvents), which may be tox-
wash them off with water and check if the
ic or cause damage.
ornament is damaged.
Do not scrub any part of the ve-
Aluminum wheels: Use only a mild soap
hicle with a hard brush, which may
or neutral detergent.
cause damage.
Plastic bumpers: Wash carefully. Do not
scrub with abrasive cleaners. The bumper
faces are soft.
NOTICE
If a nozzle becomes blocked, do not
try to clear it with a pin or other
object. The nozzle will be damaged.
NOTICE
Do not use dye or bleach on the
belts—it may weaken them.
Do not use the belts until they be-
come dry.
Leather Interior
NOTICE Mildew may develop on soiled leath-
The leather upholstery may be cleaned er upholstery. Be especially careful
Do not use organic substances (sol- with neutral detergent for wool. to avoid oil spots. Try to keep your
vents, kerosene, alcohol, gasoline, Remove dirt using a soft cloth dampened upholstery always clean.
etc.) or alkaline or acidic solutions. with 5% solution of neutral detergent for
These chemicals can cause discol- Long exposure to direct sunlight
wool. Then thoroughly wipe off all traces may cause the leather surface to
oring, staining or peeling of the of detergent with a clean damp cloth.
surface. harden and shrink. Keep your ve-
After cleaning or whenever any part of the hicle in a shaded area, especially in
If you use cleaners or polishing
leather gets wet, dry with a soft clean the summer.
agents, make sure their ingredients cloth. Allow the leather to dry in a venti-
do not include the substances men- The interior of your vehicle is apt
lated shaded area. to heat up on hot summer days, so
tioned above.
avoid placing on the upholstery
If you use a liquid car freshener, do NOTICE
items made of vinyl or plastic or
not spill the liquid onto the ve-
hicle’s interior surfaces. It may con- If a stain should fail to come out containing wax as these tend to
with a neutral detergent, apply a stick to leather when warm.
tain the ingredients mentioned
above. Immediately clean any spill cleaner that does not contain an Improper cleaning of the leather up-
using the method mentioned above. organic solvent. holstery could result in discolor-
Never use organic substances such ation or staining.
as benzine, alcohol or gasoline, or
alkaline or acid solutions for clean- If you have any questions about the
ing the leather as these could cleaning of your Toyota, your local
cause discoloring. Toyota dealer will be pleased to answer
Use of a nylon brush or synthetic them.
fiber cloth, etc. may scratch the
fine grained surface of the leather.
SECTION 6
VEHICLE MAINTENANCE AND CARE
Vehicle maintenance and care
Maintenance requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
General maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
Does your vehicle need repairing? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
Emissions Inspection and Maintenance (I/M) programs . . . . . . . . . 248
Maintenance requirements
Your Toyota vehicle has been designed for Scheduled maintenance Where to go for service?
fewer maintenance requirements with long- The scheduled maintenance items listed in Toyota technicians are well−trained spe-
er service intervals to save both your time the “Scheduled Maintenance Guide” or cialists and are kept up to date with the
and money. However, each regular mainte- “Owner’s Manual Supplement” are those latest service information through technical
nance, as well as day−to−day care, is required to be serviced at regular inter- bulletins, service tips, and in−dealership
more important than ever before to ensure vals. training programs. They learn to work on
smooth, trouble−free, safe, and economical Toyotas before they work on your vehicle,
drivings. For details of your maintenance schedule,
read the “Scheduled Maintenance Guide” rather than while they are working on it.
It is the owner’s responsibility to make or “Owner’s Manual Supplement”. You can be confident that your Toyota
sure the specified maintenance, including dealer’s service department performs the
general maintenance service, is performed. It is recommended that any replacement
parts used for maintenance or for the best job to meet the maintenance require-
Note that both the new vehicle and emis- ments on your vehicle—reliably and eco-
sion control system warranties specify that repair of the emission control system
be Toyota supplied. nomically.
proper maintenance and care must be per-
formed. See “Owner’s Warranty Informa- The owner may elect to use non−Toyota Your copy of the repair order is proof that
tion Booklet” or “Owner’s Manual Supple- supplied parts for replacement pur- all required maintenance has been per-
ment” for complete warranty information. poses without invalidating the emission formed for warranty coverage. If any prob-
control system warranty. However, use lems should arise with your vehicle while
General maintenance under warranty, your Toyota dealer will
of replacement parts which are not of
General maintenance items are those day− equivalent quality may impair the effec- promptly take care of it. Again, be sure
to−day care practices that are important to tiveness of the emission control sys- to keep a copy of the repair order for any
your vehicle for proper operation. It is the tems. service performed on your Toyota.
owner’s responsibility to insure that the What about do−it−yourself maintenance?
general maintenance items are performed You may also elect to have
regularly. maintenance, replacement, or repair of Many of the maintenance items are easy
the emission control devices and to do yourself if you have a little mechani-
These checks or inspections can be done system performed by any automotive cal ability and a few basic automotive
either by yourself or a qualified technician, repair establishment or individual tools. Simple instructions for how to per-
or if you prefer, your Toyota dealer will be without invalidating this warranty. See form them are presented in Section 7.
pleased to do them at a nominal cost. “Owner’s Warranty Information Booklet”
or “Owner’s Manual Supplement” for
complete warranty information.
244 2007 YARIS S/D from Jan. ’06 Prod. (OM52646U)
05 12.06
General maintenance
If you are a skilled do−it−yourself Listed below are the general maintenance Engine coolant level
mechanic, the Toyota service manuals are items that should be performed as fre- Make sure the coolant level is between
recommended. Please be aware that quently as specified. In addition to check- the “FULL” and “LOW” lines on the see−
do−it−yourself maintenance can affect your ing the items listed, if you notice any through reservoir when the engine is cold.
warranty coverage. See “Owner’s Warranty unusual noise, smell or vibration, you See Section 7−2 for additional information.
Information Booklet” or “Owner’s Manual should investigate the cause or take your Radiator, condenser and hoses
Supplement” for the details. vehicle to your Toyota dealer or a quali- Check that the front of the radiator and
fied service shop immediately. It is recom- condenser are clean and not blocked with
mended that any problem you notice be leaves, dirt or insects. See Section 7−2
brought to the attention of your dealer or for additional information.
the qualified service shop for their advice.
Battery condition
Check the battery condition by the indica-
CAUTION
tor color. See page 272 in Section 7−3 for
additional information.
Make these checks only with ade-
quate ventilation if you run the en- Brake fluid level
gine. Make sure the brake fluid level is correct.
See Section 7−2 for additional information.
IN THE ENGINE COMPARTMENT Engine oil level
Check the level on the dipstick with the
Items listed below should be checked
engine turned off and the vehicle parked
from time to time, e.g. each time when
on a level ground. See Section 7−2 for
refueling.
additional information.
Washer fluid
Exhaust system
Make sure there is sufficient fluid in the
If you notice any change in the sound of
tank. See Section 7−3 for additional in-
the exhaust or smell exhaust fumes, have
formation.
the cause located and corrected immedi-
ately. (See “Engine exhaust cautions” on
page 173 in Section 2.)
SECTION 7− 1
DO−IT−YOURSELF MAINTENANCE
Introduction
Engine compartment overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
Fuse locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 251
Do−it−yourself service precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
Parts and tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254
Positioning the jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
Fuse locations
PS71508 US71001
US71006
Spare
fuses
PS71504
Do−it−yourself service
precautions
If you perform maintenance by yourself,
be sure to follow the correct procedure CAUTION Do not get under your vehicle with
given in this Section. just the body jack supporting it. Al-
When the engine is running, keep ways use automotive jack stands or
You should be aware that improper or in- other solid supports.
hands, clothing, and tools away
complete servicing may result in operating
problems.
from the moving fan and engine Be sure that the ignition is off if
drive belts. (Removing rings, you work near the electric cooling
Performing do−it−yourself maintenance watches, and ties is advisable.) fans or radiator grille. With the
during the warranty period may affect your
Right after driving, the engine ignition on, the electric cooling fans
warranty coverage. Read the separate compartment—the engine, radiator, will automatically start to run if the
Toyota Warranty statement for details and engine coolant temperature is high
exhaust manifold and spark plug
suggestions.
boots, etc.—will be hot. So be care- and/or the air conditioning is on.
This section gives instructions only for ful not to touch them. Oil, fluids Use eye protection whenever you
those items that are relatively easy for an and spark plugs may also be hot. work on or under your vehicle
owner to perform. As explained in Section
If the engine is hot, do not remove where you may be exposed to flying
6, there are still a number of items that or falling material, fluid spray, etc.
the radiator cap or loosen the drain
must be done by a qualified technician
with special tools.
plugs to prevent burning yourself. Used engine oil contains potentially
Do not leave anything that may harmful contaminants which may
For information on tools and parts for do−
burn easily, such as paper or rags, cause skin disorders such as in-
it−yourself maintenance, see “Parts and
in the engine compartment. flammation or skin cancer, so care
tools”. should be taken to avoid prolonged
Do not smoke, cause sparks or al-
Utmost care should be taken when work- and repeated contact with it. To re-
low open flames around fuel or the
ing on your vehicle to prevent accidental battery. Their fumes are flammable. move used engine oil from your
injury. Here are a few precautions that skin, wash thoroughly with soap
you should be especially careful to ob- Be extremely cautious when work- and water.
serve: ing on the battery. It contains poi-
sonous and corrosive sulfuric acid. Do not leave used oil within the
reach of children.
Dispose of used oil and filter only NOTICE Do not reuse iridium−tipped spark
in a safe and acceptable manner. plugs by cleaning or regapping.
Remember that battery and ignition
Do not dispose of used oil and fil- Do not overfill automatic transmis-
cables carry high currents or volt-
ter in household trash, in sewers or sion fluid, or the transmission
ages. Be careful of accidentally
onto the ground. Call your dealer or could be damaged.
causing a short circuit.
a service station for information
Add only “Toyota Super Long Life Do not drive with the air cleaner
concerning recycling or disposal.
Coolant” or similar high quality eth- filter removed, or excessive engine
Take care when filling the brake and ylene glycol based non−silicate, wear could result. Also backfiring
clutch fluid reservoirs because could cause a fire in the engine
non−amine, non−nitrite, and non−bo-
brake fluid can harm your eyes and compartment.
rate coolant with long−life hybrid
damage painted surfaces. If fluid
organic acid technology to fill the Be careful not to scratch the glass
gets in your eyes, flush your eyes
radiator. “Toyota Super Long Life surface with the wiper frame.
with clean water immediately. If you
Coolant” is a mixture of 50% cool-
still feel uncomfortable with your When closing the engine hood,
ant and 50% deionized water (for
eyes, go to the doctor. check to see that you have not for-
the U.S.A.) or 55% coolant and 45%
gotten any tools, rags, etc.
deionized water (for Canada).
If you spill some of the coolant, be
sure to wash it off with water to
prevent it from damaging the parts
or paint.
Do not allow dirt or anything else
to fall through the spark plugholes.
Use only spark plugs of the speci-
fied type. Using other types will
cause engine damage, loss of per-
formance or radio noise.
SECTION 7− 2
DO−IT−YOURSELF MAINTENANCE
Engine and Chassis
Checking the engine oil level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
Checking the engine coolant level . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260
Checking the radiator and condenser . . . . . . . . . . . . . . . . . . . . . . . . . 261
Checking brake fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
Checking tire inflation pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262
Checking and replacing tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
Rotating tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
Installing snow tires and chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267
Replacing wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
Aluminum wheel precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
CAUTION
NOTICE
To prevent damage to the radiator
Toyota recommends “Toyota Super Long
and condenser, do not perform the Before checking or adding the brake
Life Coolant”, which has been tested to
work by yourself. fluid, remove the cover. (See “(c) Jump
ensure that it will not cause corrosion nor starting” on page 215 in Section 4.)
result in malfunction of your engine To check the fluid level, simply look at
coolant system with proper usage. “Toyota the see−through reservoir. The level
Super Long Life Coolant” is formulated should be between the “MAX” and
with long−life hybrid organic acid “MIN” lines on the reservoir.
technology and has been specifically
designed to avoid engine cooling system It is normal for the brake fluid level to go
malfunction on Toyota vehicles. down slightly as the brake pads wear. So
be sure to keep the reservoir filled.
Please contact your Toyota dealer for
further details. If the reservoir needs frequent refilling, it
may indicate a serious mechanical prob-
lem.
If the level is low, add SAE J1703 or
FMVSS No.116 DOT 3 brake fluid to the
brake reservoir.
The tires on your Toyota have built−in If air loss occurs while driving, do not REPLACING YOUR TIRES
tread wear indicators to help you continue driving. Driving even a short When replacing a tire, use a tire of
know when the tires need replace- distance can damage a tire beyond the same size and construction,
ment. When the tread depth wears to repair. and the same or greater maximum
1.6 mm (0.06 in.) or less, the indica- Any tires which are over 6 years load as the originally installed
tors will appear. If you can see the old must be checked by a qualified tires.
indicators in two or more adjacent technician even if damage is not
grooves, the tire should be replaced. Using any other size or type of tire
obvious. may seriously affect handling, ride,
The lower the tread, the higher the
risk of skidding. Tires deteriorate with age even if they speedometer/odometer calibration,
have never or seldom been used. ground clearance, and clearance be-
The effectiveness of snow tires is tween the body and tires or snow
lost if the tread wears down below This applies also to the spare tire and
tires stored for future use. chains.
4 mm (0.16 in.).
Check that the maximum load of the
If you have tire damage such as replaced tire is greater than 1/2 of the
cuts, splits, cracks deep enough to Gross Axle Weight Ratings (GAWR)
expose the fabric, or bulges indi- of either the front axle or the rear
cating internal damage, the tire axle, whichever is greater. As for the
should be replaced. maximum load of the tire, see the load
If a tire often goes flat or cannot be limit at maximum cold tire inflation
properly repaired due to the size or pressure mentioned on the sidewall
location of a cut or other damage, it of the tire, and as for the Gross Axle
should be replaced. If you are not Weight Ratings (GAWR), see the Cer-
sure, consult with your Toyota dealer. tification Label.
For details about the sidewall of the
tire and the Certification Label, see
pages 183 and 180.
Rotating tires
Toyota recommends all four tires,
CAUTION or at least both of the front or rear
tires be replaced at a time as a set.
Observe the following instruc-
tions. Otherwise, an accident See “If you have a flat tire” on page
may occur resulting in death or 219 in Section 4 for tire change proce-
serious injuries. dure.
When a tire is replaced, the wheel
US72002
Do not mix radial, bias belted,
or bias−ply tires on your ve- should always be balanced.
hicle, as this may cause dan- An unbalanced wheel may affect ve-
gerous handling characteris- hicle handling and tire life. Wheels
tics resulting in loss of control. can get out of balance with regular
Do not use tires other than the use and should therefore be balanced
manufacturer’s recommended occasionally. To equalize the wear and help
size, as this may cause danger- When replacing a tubeless tire, the extend tire life, Toyota
ous handling characteristics air valve should also be replaced recommends that you rotate your
resulting in loss of control. with a new one. tires according to the maintenance
schedule. (For scheduled
maintenance information, please
refer to the “Scheduled
Maintenance Guide” or “Owner’s
Manual Supplement”.). However,
the most appropriate timing for tire
rotation may vary according to
your driving habits and road
surface conditions.
Do not use tires other than those men- Mark the direction of rotation and be sure
Do not include a compact spare tioned above. Do not install studded tires to install them in the same direction when
tire when rotating the tires. It is without first checking local regulations for replacing.
designed for temporary use only. possible restrictions.
CAUTION
CAUTION
Do not drive with the snow tires
Do not use snow tires other than the incorrectly inflated.
manufacturer’s recommended size, as Never drive over 120 km/h (75 mph)
this may cause dangerous handling with any type of snow tires.
characteristics resulting in loss of
control. Otherwise, an accident may
occur resulting in death or serious
injuries.
Replacing wheels
TIRE CHAIN SELECTION WHEN TO REPLACE YOUR WHEELS
CAUTION
Use the tire chains of correct size and If you have wheel damage such as
type. bending, cracks or heavy corrosion, the
Do not exceed 50 km/h (30 mph) or
Use SAE Class “S” type radial tire chains wheel should be replaced.
the chain manufacturer’s recom-
except radial cable chains or V−bar type mended speed limit, whichever is If you fail to replace a damaged wheel,
chains. lower. the tire may slip off the wheel or they
may cause loss of handling control.
Regulations regarding the use of tire Drive carefully avoiding bumps,
chains vary according to location or holes, and sharp turns, which may WHEEL SELECTION
type of road, so always check local reg- cause the vehicle to bounce. When replacing wheels, care should be
ulations before installing chains.
Avoid sharp turns or locked−wheel taken to ensure that the wheels are re-
CHAIN INSTALLATION braking, as use of chains may ad- placed by ones with the same load ca-
Install the chains on the front tires as versely affect vehicle handling. pacity, diameter, rim width, and offset.
tightly as possible. Do not use tire When driving with chains installed, This must be observed on compact spare
chains on the rear tires. Retighten be sure to drive carefully. Slow tires, too.
chains after driving 0.5—1.0 km down before entering curves to Correct replacement wheels are available
(1/4—1/2 mile). avoid losing control of the vehicle. at your Toyota dealer.
When installing chains on your tires, care- Otherwise an accident may occur.
A wheel of a different size or type may
fully follow the instructions of the chain adversely affect handling, wheel and bear-
manufacturer. ing life, brake cooling, speedometer/odom-
NOTICE
If wheel covers are used, they will be eter calibration, stopping ability, headlight
scratched by the chain band, so remove Do not attempt to use a tire chain on aim, bumper height, vehicle ground clear-
the covers before putting on the chains. the compact spare tire, as it may re- ance, and tire or snow chain clearance to
sult in damage to the vehicle as well the body and chassis.
as the tire.
SECTION 7− 3
DO−IT−YOURSELF MAINTENANCE
Electrical components
Checking battery condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
Battery recharging precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
Checking and replacing fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
Adding washer fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
Replacing light bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
LS73002 PS73524
Good Brown
Type A Type C
PS73502
Good Brown
Type B
Type A fuses can be pulled out by the If the new fuse immediately blows out,
pull−out tool. The location of the pull−out there is a problem with the electrical sys-
tool is shown in the illustration. tem. Have your Toyota dealer correct it as
If you are not sure whether the fuse has soon as possible.
blown, try replacing the suspected fuse
with one that you know is good. CAUTION
PS73504 If the fuse has blown, push a new fuse Never use a fuse with a higher am-
into the clip.
perage rating, or any other object, in
Only install a fuse with the amperage rat- place of a fuse. This may cause ex-
ing designated on the fuse box lid. tensive damage and possibly a fire.
If you do not have a spare fuse, in an
emergency you can pull out the “A/C”
fuse, which may be dispensable for
If the headlights or other electrical normal driving, and use it if its amperage
components do not work, check the rating is the same.
fuses. If any of the fuses are blown,
they must be replaced. If you cannot use one of the same amper-
age, use one that is lower, but as close
See “Fuse locations” on page 251 in Sec- to the rating as possible. If the amperage
tion 7−1 for locations of the fuses. is lower than that specified, the fuse
Turn the ignition switch and inoperative might blow out again but this does not
component off. Pull the suspected fuse indicate anything wrong. Be sure to get
straight out and check it. the correct fuse as soon as possible and
return the substitute to its original clip.
Determine which fuse may be causing the
problem. The lid of the fuse box shows It is a good idea to purchase a set of
the name of the circuit for each fuse. See spare fuses and keep them in your ve-
Section 8 for the functions controlled by hicle for emergencies.
each circuit.
NOTICE
Only use a bulb of the listed type.
—Headlights
Bulb A: HB2 halogen bulbs
Light bulbs No. W Type B: H11 halogen bulbs
C: Wedge base bulbs
Headlights — 60/55 A
D: Wedge base bulbs (amber)
Front fog lights — 55 B E: Double end bulbs
Front side marker
light
— 5 C
US73501
Front turn
— 21/5 C
signal/parking lights
Rear turn signal
— 21 D
lights
Stop/tail and rear
— 21/5 C
side marker lights 1. Open the hood. Unplug the connec-
Back−up lights — 18 C tor. Remove the rubber cover.
If the connector is tight, wiggle it.
License plate lights — 5 C
Interior light — 8 E
Personal light — 8 E
Luggage room light — 3.8 E
High mounted stop
— 18 C
light
NOTICE
US73502 US73503 Do not try to replace any of the light
bulbs mentioned above by yourself.
You may damage the vehicle.
2. Release the bulb retaining spring 3. Install the rubber cover as shown
and remove the bulb. Install a new and fit it securely on the boss. Plug
bulb and the bulb retaining spring. in the connector.
To install a bulb, align the tabs of the Make sure the rubber cover fits securely
bulb with the cutouts of the mounting on the connector and the headlight body.
hole. Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
US73505 US73002
US73004 US73006
US73005 US73007
SECTION 8
SPECIFICATIONS
Specifications
Dimensions and weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
Service specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
Service specifications
ENGINE Oil grade: COOLING SYSTEM
Valve clearance (engine cold), mm (in.): ILSAC multigrade engine oil Total capacity, L (qt., Imp. qt.):
Intake 0.15—0.25 (0.006—0.010) Please contact your Toyota dealer for fur- Manual transmission 4.8 (5.1, 4.2)
Exhaust 0.25—0.35 (0.010—0.014) ther details. Automatic transmission 4.7 (5.0, 4.1)
Spark plug type: Recommended oil viscosity: Coolant type:
DENSO SK16R11 “Toyota Super Long Life Coolant” is
NGK IFR5A11 SAE 5W−30
used in your Toyota vehicle at factory
Spark plug gap, mm(in.): fill. In order to avoid technical problems,
1.1 (0.043) only use “Toyota Super Long Life Cool-
Drive belt tension measured with Boroughs ant” or similar high quality ethylene gly-
drive belt tension gauge No. BT−33−73F col based non−silicate, non−amine, non−
(used belt), lbf: nitrite, and non−borate coolant with
long−life hybrid organic acid technology.
Generator belt
ENGINE LUBRICATION
10020
OIL008 (Coolant with long−life hybrid organic
acid technology is a combination of low
Oil capacity (drain and refill), L (qt., Imp. phosphates and organic acids.)
Outside temperature
qt.): Do not use plain water alone.
With filter 3.7 (3.9, 3.3) Please contact your Toyota dealer for
Without filter 3.4 (3.6, 3.0) further details.
“Toyota Genuine Motor Oil” is used in BATTERY
your Toyota vehicle. Use Toyota approved
“Toyota Genuine Motor Oil” or equivalent Open voltage∗ at 20C (68F):
to satisfy the following grade and viscos- 12.6—12.8 V Fully charged
ity. 12.2—12.4 V Half charged
11.8—12.0 V Discharged
∗: Voltage that is checked 20 minutes af-
ter the key is removed with all the
lights turned off
Charging rates: 5 A max.
Tires
Tire size and cold tire inflation pressure:
Front and rear
kPa (kgf/cm 2 or bar, psi)
Tire size Front Rear Wheel size
P175/65R14 81S 220 (2.2, 32) 220 (2.2, 32) 14 x 5J
P185/60R15 84T 220 (2.2, 32) 220 (2.2, 32) 15 x 5 1/2J
For sustained high speeds above 160 km/h (100 mph), in countries where such speeds are permitted by law, add
20 kPa (0.2 kgf/cm 2 or bar, 3 psi) to the front tires and rear tires, but never exceed the maximum cold tire inflation
pressure molded on the tire sidewall.
Spare
Tire size Tire inflation pressure kPa (kgf/cm 2 or bar, psi) Wheel size
T125/70D15 95M 420 (4.2, 60) 15 x 4T
Wheel nut torque, N·m (kgf·m, ft·Ibf):
103 (10.5, 76)
NOTE: For a complete information on tires (e.g. replacing tires or replacing wheels), see “Checking tire inflation pressure”
through “Aluminum wheel precautions”, page 262 through 269 in Section 7−2.
Fuses
Fuses (type A) 8. ABS2/VSC2 30 A: Anti−lock brake sys- 13. ECU−B 7.5 A: Engine immobilizer sys-
1. AM2 15 A: Starting system, multiport tem tem, daytime running light system, front
fuel injection system/sequential multi- 9. H−LP MAIN 30 A: “H−LP LH/H−LP LO passenger occupant classification sys-
port fuel injection system LH” fuse tem, power windows, door lock system,
theft deterrent system, meter and
2. HORN 10 A: Horn 10. ST 30 A: Starting system gauge
3. EFI 20 A: Multiport fuel injection sys- 11. S−LOCK 20 A: No circuit 14. ALT−S 7.5 A: Charging system
tem/sequential multiport fuel injection 12. DOME 15 A: Interior light, personal
system 15. ETCS 10 A: Multiport fuel injection
lights, theft deterrent system, audio system/sequential multiport fuel injec-
4. SPARE 30 A: Spare fuse system, wireless remote control system tion system, electronic throttle control
5. SPARE 15 A: Spare fuse system
6. SPARE 10 A: Spare fuse 16. HAZ 10 A: Turn signal lights, emergen-
7. FR DEF 20 A: No circuit cy flashers
17. H−LP RH/H−LP LO RH 10 A: Right− 22. PANEL2 7.5 A: Side marker lights, 28. CIG 15 A: Power outlet
hand headlight parking lights, tail lights, license plate 29. ACC 7.5 A: Door lock system, outside
18. H−LP LH/H−LP LO LH 10 A: Left− lights rear view mirrors, audio system
hand headlight 23. PANEL1 7.5 A: Illuminations, instru- 30. ID/UP/MIR HTR 10 A: Multiport fuel
19. EFI2 10 A: Multiport fuel injection sys- ment panel light control, meter and injection system/sequential multiport
tem/sequential multiport fuel injection gauge fuel injection system
system 24. A/C 7.5 A: Rear window defogger, air 31. IGN 7.5 A: Multiport fuel injection sys-
20. ACC2 7.5 A: Shift lock system conditioning system tem/sequential multiport fuel injection
21. TAIL 10 A: Side marker lights, parking 25. D DOOR 20 A: Power windows system, engine immobilizer system,
lights, tail lights, license plate lights, 26. RL DOOR 20 A: Rear passenger’s SRS airbag system, front passenger
multiport fuel injection system/sequen- power window (left side) occupant classification system
tial multiport fuel injection system 27. RR DOOR 20 A: Rear passenger’s 32. MET 7.5 A: Meter and gauge
power window (right side) 33. WIP 25 A: Windshield wiper and wash-
er
2007 YARIS S/D from Jan. ’06 Prod. (OM52646U) 287
05 12.06
34. RR WIP 15 A: No circuit 43. AM1 25 A: Multiport fuel injection sys- 55. MAIN 60 A: “EFI”, “HORN”, “AM2”,
35. WSH 15 A: Windshield wiper and tem/sequential multiport fuel injection “ALT−S”, “DOME”, “ST”, “ECU−B”,
washer system “ETCS”, “HAZ”, “H−LP LH/H−LP LO
Fuses (type B) LH” and “H−LP RH/H−LP LO RH” fuses
36. ECU−IG 10 A: Daytime running light
system, anti−lock brake system, elec- 44. HTR SUB2 40 A: Air conditioning sys-
tric power steering system, power win- tem
dows, door lock system, theft deterrent 45. EPS 50 A: Electric power steering sys-
system, electric cooling fan, meter and tem
gauge
46. ABS1/VSC1 50 A: Anti−lock brake sys-
37. GAUGE 10 A: Charging system, turn tem
signal lights, emergency flashers,
buck−up lights, instrument panel light 47. HTR 40 A: Air conditioning system
control, shift lock system, rear window 48. RDI 30 A: Electric cooling fan
defogger, air conditioning system, auto- 49. HTR SUB1 30 A: Air conditioning sys-
matic transmission system tem
38. OBD2 7.5 A: On−board diagnosis sys- 50. H−LP CLN/PWR HTR 30 A: No circuit
tem
51. AMT 50 A: No circuit
39. STOP 10 A: Stop lights, high mounted
stop light, multiport fuel injection sys- 52. DEF 30 A: Rear window defogger
tem/sequential multiport fuel injection 53. PWR 30 A: Power windows
system, shift lock system, anti−lock Fuses (type C)
brake system
54. ALT 120 A: Charging system, “HTR
40. D/L 25 A: Door lock system SUB2”, “EPS”, “ABS1/VSC1”, “HTR”,
41. FR FOG 15 A: Front fog lights “ABS2/VSC2”, “HTR SUB1”, “RDI”,
42. TAIL 10 A: Side marker lights, parking “DEF”, “FR FOG”, “OBD2”, “D/L”,
lights, tail lights, license plate lights, “POWER”, “RR DOOR”, “RL DOOR”,
multiport fuel injection system/sequen- “STOP” and “AM1” fuses
tial multiport fuel injection system
SECTION 9
REPORTING SAFETY DEFECTS FOR U.S.
OWNERS
Reporting safety defects for U.S. owners
Reporting safety defects for U.S. owners . . . . . . . . . . . . . . . . . . . . . . 290
Foreword
Welcome to the growing group of value−conscious people who drive Toyotas. We are proud of the advanced engineering and
quality construction of each vehicle we build.
This Owner’s Manual explains the operation of your new Toyota. Please read it thoroughly and have all the occupants
follow the instructions carefully. Doing so will help you enjoy many years of safe and trouble−free motoring. For
important information about this manual and your Toyota, read the following pages carefully.
When it comes to service, remember that your Toyota dealer knows your vehicle very well and is interested in your complete
satisfaction. Your Toyota dealer will provide quality maintenance and any other assistance you may require.
If there is not a Toyota dealer near you, please call the following number:
U.S. OWNERS: When traveling in the U.S. mainland or Canada:
Toyota Customer Experience Center Toll−free:1−800−331−4331
Hawaii:
Servco Automotive Customer Services Toll−free:1−888−272−5515
CANADIAN OWNERS: When traveling in Canada or the U.S. mainland:
Toyota Canada Customer Interaction Centre Toll−free:1−888−TOYOTA−8 or 1−888−869−6828
Please leave this Owner’s Manual in this vehicle at the time of resale. The next owner will need this information also.
All information and specifications in this manual are current at the time of printing. However, because of Toyota’s policy of
continual product improvement, we reserve the right to make changes at any time without notice.
Please note that this manual applies to all models and explains all equipment, including options. Therefore, you may
find some explanations for equipment not installed on your vehicle.
Please access our websites for further information.
The U.S. mainland www.toyota.com
Hawaii www.toyotahawaii.com
Canada www.toyota.ca
CAUTION
This is a warning against anything which may cause
injury to people if the warning is ignored. You are
informed about what you must or must not do in
order to reduce the risk of injury to yourself and
others. When you see the safety symbol
shown above, it means: “Do not...”;
“Do not do this”; or “Do not let this
NOTICE happen”.
This is a warning against anything which may cause
damage to the vehicle or its equipment if the warning
is ignored. You are informed about what you must or
must not do in order to avoid or reduce the risk of
damage to your vehicle and its equipment.
Occupant restraint systems The purpose of all occupant restraint systems is to help
reduce the possibility of death or serious injury in the
Toyota encourages you and your family to take the time event of a collision. None of these systems, either indi-
to read Section 1−3 of this Owner’s Manual carefully. In vidually or together, can ensure that there is no injury
terms of helping you understand how you can receive in the event of collision. However, the more you know
the maximum benefit of the occupant restraint systems about these systems and how to use them properly, the
this vehicle provides, Section 1−3 of this Owner’s Manu- greater your chances become of surviving an accident
al is the most important section for you and your family without death or serious injury.
to read. Seat belts provide the primary restraint to all occupants
Section 1−3 describes the function and operation con- of the vehicle, and every occupant of the vehicle should
cerning seats, seat belts, SRS airbags and child re- wear seat belts properly at all times. Children should
straint systems of this vehicle and some potential haz- always be secured in child restraint systems that are
ards you should be aware of. These systems work to- appropriate for their age and size. SRS (Supplemental
gether along with the overall structure of this vehicle in Restraint System) airbags are, as their names imply,
order to provide occupant restraint in the event of a designed to work with, and be supplemental to, seat
crash. The effect of each system is enhanced when it is belts and are not substitutes for them. SRS airbags can
used properly and together with other systems. No be very effective in reducing the risk of head and chest
single occupant restraint system can, by itself, provide injuries by preventing contact of the head and chest
you or your family with the equal level of restraint with interior portions of the vehicle.
which these systems can provide when used together.
That is why it is important for you and your family to
understand the purpose and proper use of each of these
systems and how they relate to each other.
In order to be effective, the SRS airbags must deploy Event data recorder
with tremendous speed. The rapid deployment of the
SRS airbags makes the SRS airbags themselves poten- Your vehicle has computers that monitor and control
tial sources of serious injury if an occupant is too close certain aspects of your vehicle. These computers assist
to an airbag, or if an object or some part of his or her in driving and maintaining optimal vehicle performance.
body has been placed between the occupant and the Besides storing data useful for troubleshooting, there is
airbag at the time of deployment. This is just one exam- a system to record data in a crash or a near car crash
ple of how the instructions in Section 1−3 of this Own- event. This is called an Event Data Recorder (EDR).
er’s Manual will help ensure proper use of the occupant
The SRS airbag sensor assembly contains the EDR. In
restraint systems, and increase the safety they can pro-
a crash or a near car crash event, this device may
vide to you and your family in the event of an accident.
record some or all of the following information:
Toyota recommends you to read the provisions in Sec-
Engine speed
tion 1−3 carefully and refer to them as needed during
Whether the brake pedal was applied or not
your time of ownership of this vehicle.
Vehicle speed
To what extent the accelerator pedal was depressed
Position of the transmission selector lever
Whether the driver and front passenger wore the
seat belts or not
Driver’s seat position
Front passenger’s occupant classification
Quick index
U −1
If a service reminder indicator or warning buzzer comes on . . . . . . . 105
If your vehicle will not start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
If your engine stalls while driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
If you cannot increase engine speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
If your vehicle overheats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
If you have a flat tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
If your vehicle needs to be towed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
Tips for driving during break-in period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
How to start the engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
General maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
Complete index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NO TAG
Gas station information
Fuel type:
UNLEADED gasoline, Octane Rating 87 (Research Octane Number 91)
or higher
See page 170 for detailed information.
Fuel tank capacity:
42 L (11.1 gal., 9.2 lmp.gal.)
Engine oil:
ILSAC multigrade engine oil is recommended.
See page 259 for detailed information.
Tire information: See pages 262 through 269.
Tire inflation pressure: See page 285.
Publication No. OM52646U
Part No. 01999-52646
Printed in Japan 01−0601−00 C
2007 YARIS S/D from Jan. ’06 Prod. (OM52646U) ( U)
05 12.06
Comfortable
Easy to use
Convenient
We encourage you to use your belts every time you drive.