Ultramid® for Extrusion – the reliable Contact:
Extrusion Infopoint
solution for demanding packaging Phone: +49 621 60-4 28 88
[email protected]
and technical applications
Ultramid® extrusion grades are an excellent choice for flexible packaging and Ultramid® for Extrusion Product Range
monofilaments. They exhibit a high transparency in the application and feature
outstanding mechanical properties in strength and puncture resistance, as well
as heat resistance. Ultramid® melting point viscosity number relative viscosity additives applications
Ultramid® B (homopolyamide PA6) grades
In films, Ultramid has shown to be indispensable when it comes to Ultramid® B33 L 220°C 195 3.3 lubricant BOPA, paper coating monofilaments
Ultramid® B36 L 220°C 218 3.6 lubricant blown film, casing, water cooled film
– Thermoformability
Ultramid® B36 LN 220°C 218 3.6 lubricant, nucleating agent cast film
– Barrier (particularly oxygen, flavor, aroma, and chemicals)
Ultramid® B36 LNV 220°C 218 3.6 lubricant, nucleating agent cast film
– Downgauging potential due to unique combination of mechanical, thermal
Ultramid® B40 220°C 250 4.0 blown film, monofilaments
and optical properties
Ultramid® B40 L 220°C 250 4.0 lubricant blown film, casing, monofilaments
– High suitability for casings
Ultramid® B40 LN 220°C 250 4.0 lubricant, nucleating agent cast film (blown film)
Ultramid® slow crystallisation grades
Ultramid Extrusion grades are processable while using blown and cast film pro- Ultramid® B36 SL 215°C 218 3.6 lubricant
cesses for oriented and non-oriented mono- and multilayer structures. Ultramid® B36 SLN 215°C 218 3.6 lubricant, nucleating agent cast film, blown film, extrusion lamination
Ultramid® C (copolyamide PA6/66) grades
Recyclability Ultramid® C33 196°C 195 3.3 blown film, monofilaments
The German “Stiftung Zentrale Stelle Verpackungsregister” (Central Agency Ultramid® C33 L 196°C 195 3.3 lubricant blown film
Packaging Register) has reclassified the recyclability of polyamides in the min- Ultramid® C33 LN 196°C 195 3.3 lubricant, nucleating agent blown film
imum standard for assessing the recyclability of packaging subject to system Ultramid® C37 LC 182°C 225 3.7 lubricant monofilaments, blown film, shrink film
participation pursuant to Section 21 (3) VerpackG: Since September 1 2022, Ultramid® C37 LXC 182°C 225 3.7 lubricant monofilaments
coextruded polyethylene (PE)/polyamide (PA) film structures have been recog- Ultramid® C40 L 189°C 225 4.0 lubricant monofilaments, blown film, shrink film
Ultramid® C40 LN 189°C 225 4.0 lubricant, nucleating agent blown film
nized as mechanically recyclable.
Ultramid® C40 LX 189°C 225 4.0 lubricant monofilaments
As early as June 2021, the independent testing and certification facility cy-
Ultramid® Flex F grades
clos-HTP systematically examined and confirmed the recyclability of PE/PA
Ultramid® Flex F38 199°C 3.8* special blown film
multilayer films on behalf of BASF.
Alternative feedstocks
Alternative feedstocks contribute to closing loops and support reduction of Ultramid® New nomenclature
Nomenclature Ultramid extrusion grades are designated by letters and digits which indicate chemical composition, viscosity and additives.
product carbon footprint: Besides fossil-based feedstock, Ultramid® is also
Polyamide type B = PA 6
available based on plastic waste (Ultramid® Ccycled™) or derived from biomass C = copolyamide 6/66
F = copolyamide
(Ultramid® Biomass Balance).
Viscosity class Relative viscosity in 96%/23°C sulphuric acid (i.e 36 for RV 3.6).
* Except Ultramid Flex F38, measured in different solvent.
33 = intermediate viscosity 38 = high viscosity
36 = intermediate to high viscosity 40 = high viscosity
Many Ultramid grades are available as Biomass Balance and Ccycled 37 = high viscosity
versions as well, certified according to REDcert2 and/or ISCC+. Additive L = lubricated
LC = clear
LNV = lubricated and nucleated, reduced residual caprolactam
level
LN = lubricated and nucleated LX = high gloss and transparency
S = slow crystallisation
Example: B40 LN (PA6, high viscosity, lubricated, nucleated)
