lOMoARcPSD|38628125

Department of Education
Doña Teodora Alonzo High School
TLE-Vocational Department
First Quarter Exam
ICT – Exploratory
NAME: _____________________________________ SCORE: _________

GRADE & SECTION: ___________________________

TEST I - DIRECTION: Identify the name of the DRAFTING TOOLS below.

___________________________________
1. 2. 3.

________
___________________
___________ ____________
______

4. 5. 6. 7.

________
___________________
___ ___________
______________

8. 9. 10. 11.

_________________ ________________ ___________________ _____________

Foot Rule Protractor Triangular Scale Triangle Measuring tape French curve
Erasing Shield Dusting Brush Compass Sharpener Eraser T-Square

TEST II – DIRECTIONS: Read the questions carefully and choose the letter correct answer.

12. A measuring tool used to layout an angle or measure the degrees of an angle.
a. COMPASS b. DIVIDER c. PROTRACTOR d. TAPE RULER
13. The most popular type of measuring tool, usually 6 or 12 inches in length, also a Foot Rule.
a. TAPE RULER b. TRIANGLE c. RULER d. TRIANGULAR SCALE
14. Its main purpose is to reproduce, reduce or enlarge the dimension of size on a drawing.
a. TAPE RULER b. TRIANGLE c. RULER d. TRIANGULAR SCALE
15. It is used for drawing vertical and diagonal or oblique lines with the aid of a T-square.
a. RULER b. TRIANGLE c. T-SQUARE d. TRIANGULAR SCALE
16. It is an instrument for drawing irregular curves other than arcs and circles.
a. COMPASS b. DIVIDER c. PROTRACTOR d. FRENCH CURVE
17. This is used as a guide in drawing horizontal lines with its head at the edge of a table.
a. RULER b. TRIANGLE c. T-SQUARE d. TRIANGULAR SCALE
18. This tool is used to draw circles, arcs, radii, and many parts of symbols used in drafting.
a. COMPASS b. DIVIDER c. PROTRACTOR d. TAPE RULER
19. A drafting material used to fasten a drawing paper on the drawing table or drawing board.
a. SCOTCH TAPE b. ELECTRIC TAPE c. MASKING TAPE d. TAPE MEASURE
20. This metal tool is used to protect the rest of drawing when removing unnecessary lines.
a. ERASER b. ERASING SHIELD c. SHARPENER d. PULL-PUSH RULE
21. A drafting material used to clean the dirt off the drawing and is usually made of rubber.
a. DUSTING BRUSH b. ERASING SHIELD c. ERASER d. DRAWING PAPER
 lOMoARcPSD|38628125

22. This is the most important drawing tool in mechanical drafting and is often sharpened.
a. DRAWING PENCIL b. DRAWING BOARD c. DRAWING TABLE d. DRAFTING TOOLS
23. This unit of measurement counts each line in the ruler as .1
a. CENTIMETER b. INCH c. MILLIMETER d. LITERS
24. This unit of measurement counts each line in the ruler as 1
a. CENTIMETER b. INCH C. MILLIMETER d. LITERS
25. This unit of measurement’s linear value is equal to a 1/12th of a foot and usually counts each individual lines in a
rule using fractions like ¼, ½, ¾ so on so forth.
a. KILOMETER b. INCH c. MILLIMETER d. LITERS
26. It is the abbreviation of millimeter.
a. mm b. km c. cm d. Sm
27. It is the abbreviation of centimeter.
a. mm b. km c. cm d. Sm
28. It is the abbreviation of inches.
a. mm b. km c. cm d. In
29. It is the term of used when determining the value of measurement of an angle.
a. Meters b. Liters c. Degrees d. temperature
30. This is the symbol use when showing the value of measurement of an angle.
a. # b. % c. * d. °
31. It is the purpose of the arrow in drawing lines.
a. Direction b. Design c. Art d. additional structure
32. In freehand drawing you are only allowed to use this instrument.
a. Pencil b. Compass c. Ruler d. triangle
33. This is a straight line that is drawn from top to bottom ___________________________
a. Vertical b. Horizontal c. Curved d. Inclined
34. This is a straight line that is drawn from left to right ________________________
a. Vertical b. Horizontal c. Curved d. Inclined
35. A line that is also drawn from top to bottom but is slanted ___________________
a. Vertical b. Horizontal c. Curved d. Inclined
36. This type of line has a similar shape to a letter C and has no straight line from start to endpoint ______
a. Vertical b. Horizontal c. Curved d. Inclined
37. This type of drawing is drawn without the use of any drawing instrument except a pencil and only by hands ___
a. Abstract b. Technical drawing c. Freehand drawing d. Mechanical drawing
38. A drawing that uses precision instruments and is usually to scale a mechanical or architechtural structure ____
a. Abstract b. Technical drawing c. Freehand drawing d. Mechanical drawing
39. A drawing that has no particular object seen but usually portrays feelings, emotions or a hidden meaning. ____
a. Abstract b. Technical drawing c. Freehand drawing d. Mechanical drawing
40. Commonly used by architect and engineers in doing drawing of objects or plans with precise strategic
techniques of a draftsmen. ______________________
a. Abstract b. Technical drawing c. Freehand drawing d. Mechanical drawing
41. A one dimensional figure that has length but no width _______________________
a. Line b. Ruler c. Pencil d. Shape
42. An oblique line may also be called _______________________
a. Vertical b. Horizontal c. Curved d. Inclined

TEST III – (TRUE OR FALSE) DIRECTION: WRITE TRUE IF THE STATEMENT IS TRUE AND FALSE IF IT IS NOT.

43. A ruler is also called a foot rule

44. A ruler that can measure centimeters or millimeters is called a metric ruler
45. A protractor can be also used to draw angles
46. centimeters cannot be converted into millimeters
47. one centimeters is equal to 10 millimeters
48. Protractors are primarily used to measure lines
49. Curved lines are lines that is drawn from the top to bottom, but is slanted
50. Vertical lines are lines that is drawn from top to bottom, but is slanted
 lOMoARcPSD|38628125

TEST IV – DIRECTION: Provide the measurement of the marked lines in the ruler.

1. 2.

3. – 4. 7. – 8.
5. – 6.

51. ____ inches

9.

10.

52. ____ inches

53. ____ cm
54. ____ mm
55. ____ cm
56. ____ mm
57. ____ cm
58. ____ mm
59. ____ degrees
60. ____ degrees
 lOMoARcPSD|38628125

Answer Key

1. Compass 31. a. Direction

2. Foot Rule 32. a. Pencil
3. French Curve 33. a. Vertical
4. Protractor 34. b. Horizontal
5. Triangle 35. d. Inclined
6. Triangular Scale 36. c. Curved
7. Sharpener 37. c. Freehand drawing
8. Erasing shield 38. b. Technical drawing
9. Measuring tape 39. a. Abstract
10. Dusting Brush 40. d. Mechanical drawing
11. T-Square 41. a. Line
12. c. PROTRACTOR 42. d. Inclined
13. c. RULER 43. True
14. d. TRIANGULAR SCALE 44. True
15. c. T-SQUARE 45. True
16. d. FRENCH CURVE 46. False
17. c. T-SQUARE 47. True
18. a. COMPASS 48. False
19. c. MASKING TAPE 49. False
20. b. ERASING SHIELD 50. False
21. c. ERASER 51. 1 inch
22. a. DRAWING PENCIL 52. 2 ¼ inch
23. c. MILLIMETER 53. 10 cm
24. b. INCH 54. 100 mm
25. b. INCH 55. 6.3 cm
26. a. mm 56. 63 mm
27. c. cm 57. 2.5 cm
28. d. In 58. 25 mm
29. c. Degrees 59. 125 degrees
30. d. ° 60. 50 degrees