Digital Door Lock User Manual Ver. 5.

Thank you for purchasing our product. Please read through the manual prior to starting using the product.
- This manual contains product warranty. Please fill up the warranty with details on installation shop, contact information
and data of installation to receive A/S under warranty.
- Product features and design may change without prior notification in order to improve product quality.

- The images contained in this manual are only reference used for description and instruction and its types and colors may
differ in accordance with the product model.

Safety cautions

Mortise Lock
Do not dismantle the product yourself. It causes
malfunction of product. If you dismantle the product yourself,
Prohibited the product may not function as it should.
Do not impact on or alter the product.
Prohibited It may cause malfunction or abnormal operation.
Do not use the product in place with water or humidity.
Since the product does not have water and dust proof structure,
Caution
it may cause product malfunction due to short circuit, etc.
Completely block holes on door after product installation.
Caution There is a risk of intrusion through milk hole or other door holes.
Do not place inflammables such as gas lighter near the product.
Caution It may cause malfunction or abnormal operation.
Do not use the product in place with direct sunlight or high
Prohibited
temperature. It may cause malfunction or abnormal operation.
Do not install the product in place which water like snow
or rain can come through in.
Prohibited It may cause malfunction or abnormal operation.
Do not directly spray water when cleaning the product.
Water coming through into the product causes malfunction or
Prohibited abnormal operation.
Replace all batteries with new one when changing batteries.
When changing batteries, replace all batteries with new one. If using old
Caution batteries together new one, product life span cannot be guaranteed and
product may malfunction.
Use alkaline battery only.
Caution Using rechargeable battery may cause product malfunction.

Caution
Since the product is keyless door lock, a part of door lock may need to be
damaged in case of malfunction.
It needs to be familiar with how to use manual closing and opening device
in case of emergency.
1. Voltage: DC6V / 2. Be cautious that reverse installation of batteries causes liquid leakage or a burst.
3. When battery is flat, replace all batteries and DO NOT use used batteries with new one.
4. Sensor operation temperature display: 60℃ (±10℃)
Product Structure and Name

▣ Outdoor body (Types and colors of outdoor body will differ depending on the model.)

①
⑧
①
②
①
②
⑦ ②
③
⑥
⑥
UN

⑦
LO

③
CK
LO ED

⑦
CK
E

⑥
RE D
TR
Y

④ ④ ④

⑤ ⑤ ⑤

Touchpad type B Fingerprint recognition type

① Touch keypad ④ Emergency Key Hole ⑧ Fingerprint input

② Card/Key tag input part ⑤ Handle
(Applied model) ⑥ 9V emergency power supply socket
③ External alarm lamp(Applied model) ⑦ Reset button

▣ Basic components (Check if your product contains all contents.) Caution

1 outdoor body / 1 indoor body / 1 Mortise (latch)

Strike box 1 set / 1 user manual / 1 installation guide
Bolt set / 4 AA batteries (Alkaline) ※Remove the protection tape on the touch pad
after digital door lock installation

▣ Extra accessories (Applied model) ▣ Optional accessories sold separately

Anti-metal Small card Emergency Support plate BLE/RX module Remote control
card (Tag) key (Applied models with remote control)

※Basic components (Extra accessories) and its quantity may differ depending on the product model
(Opening/closing function)
※Types and colors of card/key tag (Remote control) may change.
 ▣ Indoor body (Types and colors of indoor body will differ depending on the model.)

① ①

⑤
② ②
②
③ ③
③

④ ④ ④

☞
① Battery cover
② Input button ( ) : When you register or delete your password, use the card/key tag and the remote control.
③ Open/Close button : Use open/close button to open or close the door in the room.
④ Handle
⑤ BLE/RX Module socket : * BLE : User manual is provided separately.
* RX for remote controller : See below instruction on how to use remote controller.

1. Master Mode
Set in Master Mode
A. Setting master control password : Inputting Master control password is required
when change password or register/delete cards/remotes.
1. Press "Input button" in the indoor body.
2. Press "0" and "#" in order.
3. Register anew master control password. (3~19digits)
4. Press "✽" button to complete. "Ding-dong" for success / "3 short Beep" sound for failure will occur.
B. Changing master control password
1. Press "Input button" in the indoor body 2. Enter the Master control password and "✽" button.
3. Press "0" and "#" in order. 4. Register anew master control password. (3~19digits)
5. Press "✽" button to complete.
※In the state of Master mode, it always make two short beep sound whenever "Input button" is pressed.
※Master control password can be used to unlock the door like the same way of user password.

Registering/Changing User Password In Master Mode

A. Registering User Password
1. Press "Input button" in the indoor body. (two short beep sound)
2. Enter the Master control password and "✽" button.
3. Register User password and "✽" button to complete. "Ding-dong" for success / "3 short Beep" sound for failure will occur.
B. Changing User Password
※Change password in the same way as above. ※When registering new password, previous password is automatically deleted.
※Caution - Make sure that a door keeps being open when registering/changing password.
- Default factory password is set to "1234". Please update the password after installation.
- To go to the next stage, perform it before the lamp turns off (within 15 seconds).
 Registering/Deleting User Card In Master Mode (Applied model )
A. Registration
1. Press "Input button" in the indoor body. (two short beep sound)
2. Enter the Master control password and "✽" button.
3. Contact each Smart card to be registered to the external input part in the outdoor body.
Up to 50 Cards can be registered.
4. Press "✽" button to complete. "Ding-dong" for success / "3 short Beep" sound for failure will occur.
B. Deletion
1. Press "Input button" in the indoor body. (two short beep sound)
2. Enter the Master control password and "✽" button.
3. Press "0" button two times and "✽" button to complete.
※Caution
·If deleting card/key tag, all registered Cards/Key tags will be deleted. Then, newly register Cards/Key tags to be used.
·For card/key tag model, please use and register only card/key tag provided by us.
·We are not liable for any security incident if user uses other cards or tags. (Such as traffic card, credit card, etc) rather than dedicated card/key tag.

Registering/Deleting Remote control In Master Mode (RX applied model )

A. Registration
1. Put in RX module in the indoor body.
2. Press "Input button" in the indoor body. (two short beep sound)
3. Enter the Master control password and "✽" button.
4. Press " 0 ", " # " button in order
5. Press the one of two buttons on the Remote. Up to 15 Remotes can be registered.
6. Press "✽" button to complete. "Ding-dong" for success / "3 short Beep" sound for failure will occur.
B. Deletion
1. Press "Input button" in the indoor body. (two short beep sound)
2. Enter the Master control password and "✽" button.
3. Press "5" button two times and "✽" button to complete.
※Remote control can be registered up to 15ea.
※Door is closed or opened within 2~3 seconds after pressing the button.
※Caution : If deleting remote, all registered remote will be deleted. Then, newly register Remotes to be used.
Registering / Deleting for the linkage of Video phone In Master Mode (RX applied model)
< Specifications for 6-Pin Connector> A. Registration
Pin1 (red) → Power DC12V input 1. Put in RX module in the indoorbody.
Pin2 (blue) → Power GND 2. Press " Input button " in the indoor body.
Pin3 (orange) → Polarity Open input 3. Enter the Master control password and "✽" button.
Pin4 (brown) → Signal GND 4. Press " 0 ", " # " button in order.
5. Press the button on the TX module to complete registration. ("ding dong" sound)
B. Deletion
※ Improper connections may cause 1. Press " Input button " in the indoor body.
breakdowns or malfunctions, so please 2. Enter the Master control password and "✽" button.
3. Press " 0 ", " # " button in order.
4. Press " 5 " button two times and "✽" button to complete deletion. ("ding dong" sound)
consult an expert.

Registering/Deleting Fingerprint in Master Mode (Applied model )

※Slide the cover to open the fingerprint scanner A. Registration
1. Press "Input button" in the indoor body. (two beep short sound)
2. Enter the Master control password and "✽" button.
3. Push the scanner cover to leftside and input a fingerprint to be registered on the scanner primarily
until first "beep" sound.
4. Put the same fingerprint on the scanner secondarily until second " beep, beep" sound.
5. Re-put the same fingerprint on the scanner thirdly until third " beep, beep, beep" sound.
6. Lastly put the same fingerprint fourthly until "ding-dong-dang" sound to inform successful registration.
7. Press "✽" button to complete registration.
※Caution - Keep the finger placing on the scanner until it makes sounds. - When failed to register, start from the first step again.
- Up to 100 fingerprints can be registered.
B. Deletion
1. Press "Input button" in the indoor body. (two beep shorts sound)
2. Enter the Master control password and "✽" button.
3. Press "0", "1" and "✽" button in order to complete deletion.
※Notice
- The deletion of fingerprints causes all the existing, registered ones to be deleted.
- After the deletion, register the fingerprints to be used anew.
- The fingerprints of infants in the developmental stage or some users with unique fingerprints (those which cannot be registered) may not be recognized.
- Scanning foreign substance (sweat and moisture)-stained fingerprints or dry fingerprints may lead to failure to recognize fingerprints.
- Stay clean the fingerprint input unit so it is not stained with foreign substances and do not use a wet finger.
- If fingerprint recognition is not successful, input and use the fingerprints of another finger.
- Registered fingerprints may be also registered in a duplicate manner.

2. Revert to Non-Master mode from Master mode

No need to input master password when change password or register/delete cards/remotes.
1. Press "Input button" in the indoor body.
2. Input the registered master control password.
3. Press "✽", "0", "#", "0", "0", "✽" button in order to complete.
Remark: In the state of Non-Master Mode, it always make one beep short sound whenever "Input button" is pressed.

Registering/Changing User Password In Non-Master Mode

A. Setting User-password
1. Open the battery cover in the indoor body.
2. Press "Input button". (one beep short sound)
3. Input the new password. Up to 4 to 19 digits can be registered.
4. Press "✽" button to complete the registration.
"Ding-dong" for success / "3 short Beep" sound for failure will occur.
B. Changing User-password
※Change password in the same way as above.
※When registering new password, previous password is automatically deleted.

Registering/Deleting User Card In Non-Master Mode (Applied model )

A. Registration
1. Open the battery cover in the indoor body.
2. Press "Input button". (one beep short sound )
3. Contact each Smart card to be registered to the external input part. Up to 1 to 50 keys can be registered.
4. Press "✽" button to complete the registration. "Ding-dong" for success / "3 short Beep" sound for failure will occur.
B. Deletion
1. Open the battery cover in the indoor body and press "Input button" one time.(one short beep sound)
2. Press "0" button two times in the number pad in the outdoor body.
3. Press "✽" button to complete the deletion
※Caution : If deleting Smart card, existing registered Smart card are completely deleted.
Then, newly register Smart card to be used.

Registering/Deleting Remote control In Non-Master Mode (RX applied model )

A. Registration
1. Put in RX module in the indoorbody.
2. Press "Input button" in the indoor body. (one beep short sound)
3. Press " 0 ", " # " button in order
4. Press the one of two buttons on the Remote. Up to 15 Remotes can be registered.
5. Press "✽" button to complete. "Ding-dong" for success / "3 short Beep" sound for failure will occur.
B. Deletion
1. Press "Input button" in the indoor body. (one beep short sound)
2. Press "5" button two times and "✽" button to complete.
※Remote control can be registered up to 15ea.
※Door is closed or opened within 2~3 seconds after pressing the button.
※Caution : When deleting remote, existing registered Remotes are completely deleted. Then, newly register Remotes to be used.
▣ Product Warranty (For customer use)
※Please fill up all details when purchasing a product and present this warranty when requesting repair service.

Product Name
Production code
Date of purchase ( )year & ( )months from date of purchase (Day Month Year )
Name
Customer
Address
Store Name Tel:
(Installation
shop) Address

About product warranty

1.This product is manufactured under the strict quality management and inspection. 2.Free A/S for within warranty period is provided for any technical problem if a product is
used in a normal circumstance. Even within warranty period, if a case is matching with items described in paid service guide, service charge (Repair, parts and travel fee) will
apply. 3.It is required to present this warranty card when requesting repair service. 4.Please keep this warranty card carefully as it is not re-issuable. 5.When re-installing a
product due to relocation or more, installation and travel fee will apply. 6.A product cannot be returned or exchanged after installation except in case of serious defect of a
product. (It is in accordance with compensation criteria for consumers' damages.)
Requesting service
1.Please check instructions in user manual and check-list in case of malfunction prior to contacting us. 2.If the problem persists, stop using a product and contact sales
agency/HQs. ※It is very dangerous to try to repair a product yourself. ※Please provide the following information when contacting us: Model name, date of purchase and
place of purchase / Address, name, contact number and home address / Symptoms (In detail)

▣ Compensation Criteria for Consumers' Damages

Compensation
Type of consumer damages
Within warranty period After warranty period
Malfunction Free service Paid service
Malfunction which identical defect occurs twice Free service Paid service
Normal usage
Exchange (In accordance
When parts for repair is not available Exchange with the declining balance
method of depreciation)
User error such as incorrect battery replacement, incorrect input, etc Paid service Paid service
Consumer’s intention Replacement of consumables (such as battery) Paid service Paid service
or mistake Malfunction or damage caused by using a product for other purposes Paid service Paid service
Malfunction or damage is made intentionally Paid service Paid service
Malfunction or damage caused by fire or natural disaster Paid service Paid service

Free/paid service (Criteria in detail)

Service fee is charged in accordance with Consumer Protection Act. (Based on Article 5. Compensation Criteria for Consumers' Damages, Consumer Protection Act.) Service fee
consists of part cost and travel repair fee and each fee is determined by the followings. Service fee = part cost + travel repair fee (Repair service fee)
■ Free repair: Problems in performance or function occurred within warranty period while using a product in normal way.
■ Paid repair: After warranty period or in the following cases within warranty period
In case of ‘User error’ / Service request for How-to question or forgotten password (Loss of key) / Request to check up product without precise defect / Malfunction after
installing a product by consumer / Damage caused by external impact / Malfunction caused by incorrect way of inserting or replacing batteries / Damaged cover when
consumer replaces battery / Malfunction or quality issue caused by using chemical materials / Request for re-installation due to faulty installation (Alter front location)
For models with emergency key, product damage caused since consumer did not take emergency with him/her / Product malfunction caused by condensation
■ Part cost: Part cost refers to cost of part(s) which is required for product repair
■ Travel repair fee: Travel repair fee applies to paid service and is total of technical fee in accordance with required level of difficulty (Time) and travel fee.

Ver. 5.0
 Registering / Deleting for the linkage of Video phone In Non-Master Mode (RX applied model )
< Specifications for 6-Pin Connector> A. Registration
Pin1 (red) → Power DC12V input 1. Put in RX module in the indoor body.
Pin2 (blue) → Power GND 2. Press " Input button " in the indoor body.
Pin3 (orange) → Polarity Open input 3. Press " 0 ", " # " button in order.
Pin4 (brown) → Signal GND 4. Press the button on the TX module to complete registration. ("ding dong" sound)
※ Improper connections may cause
B. Deletion
1. Press " Input button " in the indoor body.
breakdowns or malfunctions, 2. Press " 0 ", " # " button in order.
so please consult an expert. 3. Press " 5 " button two times and "✽" button to complete deletion. ("ding dong" sound)

Registering/Deleting Fingerprint in Non-Master Mode (Applied model )

※Slide the cover to open the fingerprint scanner A. Registration
1. Press "Input button" in the indoor body. (one short beep sound)
2. Slide the scanner cover to leftside and put a fingerprint to register on the scanner until first "beep" sound.
3. Put the same fingerprint on the scanner secondarily until second " beep, beep" sound.
4. Re-put the same fingerprint on the scanner thirdly until third " beep, beep, beep" sound.
5. Lastly put the same fingerprint fourthly until "ding-dong-dang" sound to inform successful registration.
6. Press " * " button to complete registration.
※Caution : - Keep the finger placing on the scanner until it makes sounds.
- When failed to register, start from the first step again.
- Up to 100 fingerprints can be registered.
B. Deletion
1. Press "Input button" in the indoor body. (two short beep sound)
2. Press "0", "1" and "✽" button in order to complete deletion.
※Notice
- The deletion of fingerprints causes all the existing, registered ones to be deleted.
- After the deletion, register the fingerprints to be used anew.
- The fingerprints of infants in the developmental stage or some users with unique fingerprints (those which cannot be registered) may not be recognized.
- Scanning foreign substance (sweat and moisture)-stained fingerprints or dry fingerprints may lead to failure to recognize fingerprints.
- Stay clean the fingerprint input unit so it is not stained with foreign substances and do not use a wet finger.
- If fingerprint recognition is not successful, input and use the fingerprints of another finger.
- Registered fingerprints may be also registered in a duplicate manner.

3. Common Features
Open a door with Fingerprint, Card/Key tag from outside
A. Card/Key tag model
Place the registered Card / key tag on external touch key pad.
(Ding dong sound)
B. Opening the door with fingerprints Card/key tag pad
Contact the registered fingerprints with the fingerprint input.
( “Beep” sound)

Open a door using password from outside

1. Press more than 2 buttons on outdoor keypad (Beeping sound / Keypad flashes) to turn on
the light of touch pad.
2. Enter password and press ✽ button to open a door.

※After failure to input valid password in 5th attempt, operation will not be available for about 1 minute.
Caution ※Please try it again after 1 minute when the operation is suspended.
 Open a door from inside
Pull down the handle of the indoor body, and the door will be opened easily.
(Anti-panic function)

Lock a door from outside

A. On auto mode
- Door will be automatically locked in 1 second after closing the door. (With a built-in auto-lock internal sensor)
B. On manual mode
- Press two or more buttons of the touch-type number plate.

Lock a door from inside

A. On auto mode
- Door will be automatically locked in 1 second after closing the door.
B. On manual mode
- Press ‘open/close’ button to lock a door.
※For the models that do not use open/close button, turn the manual opening and closing
device to lock the door.

※Use manual opening/closing device only in case of fire or other emergencies.

External dual locking function

※When the external dual lock is set, the door does not open in spite of pressing open/close button from the indoor.
(Prevent intrusion through hole)
- Enable: Press more than 2 buttons on touch keypad of outdoor body → Press and hold # button on outdoor body for more than
5 seconds to enable dual locking function
- Disable: Press more than 2 buttons on touch keypad of outdoor body → Enter registered password → Press “✽” button to
disable the function

Inside dual locking function

※Once inside dual locking function is enabled, a door will not open even though entering valid
password from outside.

- Enable : Press and hold open/close button for more than 5 seconds (Ding dong sound)
- Disable : Press and hold open/close button for more than 5 seconds to disable the function
and open a door

Reset function
※Function to reset program by pressing Reset button in case of temporary error rather than
product malfunction.
▣ Reset button
Press Reset button using a sharp object such as ballpoint pen, toothpick, etc
 ☞ ☞
Set auto/manual locking (Convenient function to automatically lock 1 second after closing a door)
- Auto lock: Open battery cover and press Input button( ) → Press # button → Press Input button( )

☞ ☞
(Ding dong sound)
- Manual lock: Open battery cover and press Input button( ) → Press # button → Press Input button( )

☞
(One beep short sound when set to manual lock mode)
▣ Set auto locking time (Change auto lock time to 2 ~ 9 seconds)
Press Input button( ) on indoor body → Press 8 → Press time you wish to set (2~9 button) → Press ✽ button

Other useful functions

▣ Function to prevent password exposure (Fake number function)
- Hide password by pressing password after entering random numbers

▣ Alert function
- Locking error alert function:
When a door is not properly closed, it makes 3 attempts to open the door and generate beeping sounds to alert.
- Intrusion and prank prevention function:
Function to generate emergency alarm for 1 minute to prevent intrusion when there is an attempt to open a door by force.
※Enter password or card/key tag to turn off the alarm.

▣ Sound setting

☞
- Adjust sound (Low → High volume):
Press internal Input button( ) → Press 1, 3, and ✽ in order → Press "1" button several times to turn down volume
or "3" button several times to turn up the volume (Low to High volume) → Press ✽ button
※The volume of sound can be adjusted in 6 steps.

▣ Fire detection function (Built in fire detection sensor)

- When heat detection sensor detects heat (60℃±10℃), it automatically opens a door.
※When indoor body is exposed to direct sunlight for a long period of time, the temperature sensor may generate alarm.

▣ Function to open a door using outside emergency key (Applied model with emergency key)
UN
LO
CK
LO ED
CK
E
RE D
TR
Y
The function allows opening a door using emergency key in case of emergency or other
particular situations. Pull emergency hole cap to side, insert emergency key to the hole and
turn around the key.
※Use this key in emergency cases. Alarm will generate when open the door using this key.
※Always take the emergency key with you in case of emergency.

▣ Function to open a door using apps (BLE applied model)

※To turn On/Off Bluetooth fuction on the door lock, please follow the next process. It toggles On or Off.

☞☞
※Factory state is bluetooth-On
-In non master mode : Press Input button( ) → 0 → # → 2 → 2 →✽
-In master mode : Press Input button( )→ Master password → ✽ → 0 → # → 2 → 2 →✽
※Please refer to the app Usage Guideline separately for following process.
1. Insert BLE pack in the back body 2. Download the app on the smart phone 3. Link the door lock
4. Invite users 5. Set Smart Keywe : In Magic touch or Smart open
※Caution : In case user's smart phone is lost or hacked, turn off the bluetooth function on the lock
 Change battery
When installed batteries are going flat, lamp flashes 7 days before and generate melody to inform battery change.
In this case, replace all batteries with new one. Password or card/key tag will not change even after replacing the batteries.
※Product life span cannot be guaranteed if used batteries are used together with new one. It is required to use
quality alkaline battery. When using rechargeable battery, product can cause malfunction.
Caution ※Please check battery polarity (+/-). Polarity reversal may cause malfunction. Consumer is liable for any damage
caused by faulty battery and make sure to use quality alkaline battery only.

Unlock a door with emergency battery

When batteries are completely flat after long term travel, the emergency power supply function
allows safe unlocking of a door. Purchase DC9V alkaline battery, contact it to emergency socket
on outdoor body and apply password, fingerprint or card/key tag.
※Make sure that battery is properly contacted with emergency socket when using
※Location of external emergency power supply socket may differ according to
this function. (External emergency power supply socket does not have polarity).
Caution
the product model.
▣ Unlock a door using password
Contact 9V battery to emergency socket → Press more than 2 buttons to turn on the light of touch pad and enter password
→ Press ✽ button to unlock
▣ Unlock a door using fingerprint, card/key tag (Applied model with fingerprint, card/key tag)
Contact 9V battery to emergency socket and place fingerprint, card/key tag on external input pad to unlock a door.
Fault diagnosis and troubleshooting
Symptoms Troubleshooting
- Open a door using card/key tag and register new password
Cannot remember password (number-dedicated models excluded)
Password input failure - All functions are not available for 1 minute after failure of 5th attempt.
(5 attempts) Wait for 1 minute and set new password or card/key tag.
Door is not automatically locked - Check if auto locking function is enabled

✽ button is not working

- If other functions are not working, check if batteries are properly inserted.
If batteries are flat, replace them with new batteries.
External button sound is not working and - Check if there is any liquid leakage on battery case or product and if so,
lamp is not flashing wipe out contact area with a dry cloth.

Product specifications
Type Specification
Use password 3 ~ 19 digits
The number of Cards/Key tags to be registered Up to 50 (Applied models with card/key tag
Basic items The number of remote control to be registered Up to 15 (Applied models with remote control)
The number of fingerprints to be registered Up to 100 (Applied models with the input of the fingerprints)
Thickness of door 40 ~ 50 mm
Power source 6V (AA Size 1.5V Alkaline Battery X 4EA)
Power supply
Emergency power source (Do not have polarity) 9V square alkaline battery (Purchase separately)