®
SR22 – SR210
2.0A SURFACE MOUNT SCHOTTKY BARRIER DIODE
WON-TOP ELECTRONICS
Pb
Features
Low Forward Voltage
Epitaxial Construction with Oxide Passivation B
Guard Ring for Transient and ESD Protection
Surge Overload Rating to 50A Peak D
Low Power Loss A
Fast Switching F
Ideally Suited for Use in High Frequency
SMPS, Inverters and As Free Wheeling Diodes C H G
E
Mechanical Data SMA/DO-214AC
Dim Min Max
Case: SMA/DO-214AC, Molded Plastic A 2.29 2.92
Terminals: Solder Plated, Solderable B 4.00 4.60
per MIL-STD-750, Method 2026 C 1.27 1.90
Polarity: Cathode Band or Cathode Notch D 0.152 0.305
Marking: Type Number E 4.80 5.30
Weight: 0.064 grams (approx.) F 2.00 2.44
Lead Free: For RoHS / Lead Free Version, G 0.051 0.203
Add “-LF” Suffix to Part Number, See Page 4 H 0.76 1.52
All Dimensions in mm
Maximum Ratings @TA=25°C unless otherwise specified
Characteristic Symbol SR22 SR23 SR24 SR25 SR26 SR28 SR29 SR210 Unit
Peak Repetitive Reverse Voltage VRRM
Working Peak Reverse Voltage VRWM 20 30 40 50 60 80 90 100 V
DC Blocking Voltage VR
RMS Reverse Voltage VR(RMS) 14 21 28 35 42 56 63 70 V
Average Rectified Output Current (Note 1) IO 2.0 A
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-Wave Superimposed on IFSM 50 A
Rated Load (JEDEC Method)
Forward Voltage @IF = 2.0A VFM 0.50 0.70 0.85 V
Peak Reverse Current @TJ = 25°C 0.5
IRM mA
At Rated DC Blocking Voltage @TJ = 100°C 10
Typical Junction Capacitance (Note 2) CJ 150 100 pF
Thermal Resistance, Junction to Ambient (Note 1) RθJA 88
°C/W
Thermal Resistance, Junction to Lead (Note 1) RθJL 25
Operating Temperature Range TJ -55 to +125 -55 to +150 °C
Storage Temperature Range TSTG -55 to +150 °C
Note: 1. Mounted on FR-4 PCB with 5.0 x 5.0mm copper pads.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
© Won-Top Electronics Co., Ltd. www.wontop.com
Revision: September, 2012 1
®
SR22 – SR210
WON-TOP ELECTRONICS
I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A)
2.5 10
IF, INSTANTANEOUS FORWARD CURRENT (A)
TA = 25°C
2.0
SR25 – SR26
SR25 – SR210 1.0
1.5
SR22 – SR24 SR22 – SR24
1.0 SR28 – SR210
0.1
0.5 Pulse Width = 300µs
Resistive or 1% Duty Cycle
Inductive Load
0 0.01
0 15 30 45 60 75 90 105 120 135 150 0 0.2 0.4 0.6 0.8 1.0
TL, LEAD TEMPERATURE (°C) VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 1 Forward Current Derating Curve Fig. 2 Typical Forward Characteristics
50 100
IR, INSTANTANEOUS REVERSE CURRENT (mA)
IFSM, PEAK FORWARD SURGE CURRENT (A)
Single Half-Sine-Wave
JEDEC Method
40 10
TJ = 125°C
30 1.0
20 0.1 TJ = 75°C
10 0.01
TJ = 25°C
0 0.001
1 10 100 0 20 40 60 80 100
NUMBER OF CYCLES AT 60Hz PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 3 Forward Surge Current Derating Curve Fig. 4 Typical Reverse Characteristics
250
CJ, JUNCTION CAPACITANCE (pF)
f = 1MHz
200
150
SR22 – SR26
100
SR28 – SR210
50
0
0.1 1 10 100
VR, DC REVERSE VOLTAGE (V)
Fig. 5 Typical Junction Capacitance
www.wontop.com © Won-Top Electronics Co., Ltd.
2 Revision: September, 2012
®
SR22 – SR210
WON-TOP ELECTRONICS
MARKING INFORMATION RECOMMENDED FOOTPRINT
0.050 MIN
(1.27 MIN)
SR2x 0.058 MIN
(1.47 MIN)
Cathode = Polarity Band 0.083 MAX
SR2x = Device Number (2.11 MAX)
x = 2, 3, 4, 5, 6, 8, 9 or 10
inches(mm)
PACKAGING INFORMATION
TAPE & REEL
Direction of Unreeling
4mm
330mm
12mm
4mm
12mm 1.6mm
Product ID Label
Reel Diameter Quantity Inner Box Size Quantity Carton Size Quantity Approx. Gross Weight
(mm) (PCS) L x W x H (mm) (PCS) L x W x H (mm) (PCS) (KG)
330 5,000 340 x 337 x 45 10,000 370 x 370 x 420 80,000 14.0
Note: 1. Paper reel, white or gray color.
2. Components are packed in accordance with EIA standard 481-1 and 481-2.
© Won-Top Electronics Co., Ltd. www.wontop.com
Revision: September, 2012 3
®
SR22 – SR210
WON-TOP ELECTRONICS
ORDERING INFORMATION
Product No. Package Type Shipping Quantity
SR22-T3 SMA 5000/Tape & Reel
SR23-T3 SMA 5000/Tape & Reel
SR24-T3 SMA 5000/Tape & Reel
SR25-T3 SMA 5000/Tape & Reel
SR26-T3 SMA 5000/Tape & Reel
SR28-T3 SMA 5000/Tape & Reel
SR29-T3 SMA 5000/Tape & Reel
SR210-T3 SMA 5000/Tape & Reel
1. Shipping quantity given is for minimum packing quantity only. For minimum
order quantity, please consult the Sales Department.
2. To order RoHS / Lead Free version (with Lead Free finish), add “-LF”
suffix to part number above. For example, SR22-T3-LF.
WON-TOP ELECTRONICS and are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and
believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the
purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein
without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road,
Chine Chen Dist., Kaohsiung 806, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
We power your everyday.
Fax: 886-7-822-5417
Email:
[email protected]Internet: http://www.wontop.com
www.wontop.com © Won-Top Electronics Co., Ltd.
4 Revision: September, 2012
