Scribd
Upload
60 views

VSS1 Flowchart Programming Mode English ASM 000 079-0 PZ464-T0131-00

The document describes the programming mode flowchart for a vehicle security system. It outlines the steps to enter programming mode by turning the ignition on and off multiple times. Programming mode allows selecting different modes for features like buzzer, auto door locks, and adding a car horn by opening and closing doors a specified number of times. Modes are confirmed by LED and buzzer flashes before exiting programming mode.

Uploaded by

hman.sarajevo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
60 views

VSS1 Flowchart Programming Mode English ASM 000 079-0 PZ464-T0131-00

The document describes the programming mode flowchart for a vehicle security system. It outlines the steps to enter programming mode by turning the ignition on and off multiple times. Programming mode allows selecting different modes for features like buzzer, auto door locks, and adding a car horn by opening and closing doors a specified number of times. Modes are confirmed by LED and buzzer flashes before exiting programming mode.

Uploaded by

hman.sarajevo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

VSS1 - Programming mode flowchart

- Alarm disarmed * : If IG OFF -> ON is operated more than 5 times,


Step 1
- All door closed you have to repeat procedure again

² : Some cars have this option as original function


- Turn key to IG ON position 5 times *
³ : Some cars cannot have the horn sounding in addition of siren
Step 2 - or press start button until IG ON 5 times *
- Final key position IG ON (! Do not start engine) REM: depending system, blinkers are flashing instead of LED

LED ON: Program mode is activated

Select the programming mode by number door Turn IG OFF


Step 3
open & close (Door closing count)
EXIT

Feature Activation or Deactivation Mode Diagnostic Mode

1x 2x 5x 9x 3x 4x

Buzzer Auto door lock Add car Horn Passive arming Alarm memory Installation conf
mode mode² mode³ mode mode mode

Turn IG OFF Turn IG OFF Turn IG OFF Turn IG OFF Turn IG OFF Turn IG OFF

LED & buzzer LED & buzzer LED & buzzer LED & buzzer LED & buzzer LED & buzzer
Flashes 1x Flashes 2x Flashes 5x Flashes 9x Flashes 3x Flashes 4x

Open door Activate any other


move hand in front
trigger (door, hood,
To deactivate the mode To activate the mode of US sensor.
additional sensor
Number of LED flashes and
Open and close 1 x Open and close 2 x
beeps will indicate last 3 LED and hazard LED ON and
driver door driver door
alarm triggers with 2 sec flashes when buzzer sound
pause. trigger when trigger
Turn IG ON & OFF Turn IG ON & OFF

Close & Open door EXIT: Turn IG ON or


LED & buzzer LED & buzzer again wait 5 min
Flashes 1x Flashes 2x

Turn IG ON Turn IG ON EXIT: Turn IG ON


or wait 30 sec 2 beeps confirms exit

Rev 1.0
Publication no. ASM 000 079-0

You might also like