Data Sheet

LV­N11N
Amplifier, Cable, Main unit, NPN

Specifications

Model LV­N11N

Type 2 output

Output NPN

Cable/connector Cable

Main/Expansion unit Main unit

I/O Control outputs 2 output

External input 1 input

Monitor output None

Output selection LIGHT­ON/DARK­ON (switch­selectable)

Timer function Timer OFF/OFF­delay timer/ON­delay timer/One­shot timer,

Timer duration selectable: 1 ms to 9,999 ms,
Maximum error against the setting value: ±10% max.

Control outputs NPN open collector 30 V, Residual voltage 1 V or less (Output current: 10 mA or less) / 2 V or less (Output current: 1
0 to 100 mA)
(Stand­alone) 1 output max: 100 mA or less, 2 output total: 100 mA or less
(Multiple connections) 1 output max: 20 mA or less

Response time 80 µs (HIGH SPEED)/250 µs (FINE)/500 µs (TURBO)/1 ms (SUPER)/4 ms (ULTRA)/16 ms (MEGA) *1

Monitor output ­

External input Input time 2 ms (ON)/20 ms (OFF) or more*2

Number of interference Connected to other than LV­S31: 0 for HIGH SPEED; 2 for FINE/TURBO/SUPER; 4 for ULTRA/MEGA,
prevention units Connected to LV­S31: 2 for FINE; 4 for TURBO/SUPER/ULTRA/MEGA*3

Case size H 32.6 mm 1.28" × W 9.8 mm 0.39" × L 78.7 mm 3.1"

Unit expansion Up to 17 units can be connected in total (two­output type is treated as two units)

Protection circuit Reverse polarity protection, Over­current protection, Surge absorber

Rating Power voltage 24 VDC (operating voltage 10 to 30 VDC (with ripple)), Ripple (P­P) 10 % or less, Class 2 or LPS*4*5

Power Normal: 830 mW or less (at 30 V. 30 mA at 24 V, 56 mA or less at 12 V)*6

consumption Eco on mode: 710 mW or less (at 30 V. 26 mA at 24 V, 48 mA or less at 12 V)*6
Eco Full mode: 550 mW or less (at 30 V. 21 mA at 24 V, 40 mA or less at 12 V)
*7

Environmental resistance Ambient temperature ­20 to +55 °C ­4 to 131 °F (No freezing)*8

Relative humidity 35 to 85 % RH (No condensation)

Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions

Shock resistance 500 m/s2, 3 times in each of the X, Y, and Z directions

Material Cable PVC

Case Main unit and cover material: Polycarbonate

Weight Approx. 75 g
*1
80 µs cannot be selected when the LV­S31/S62/S63 is connected
*2
Input time is 25 ms (ON)/25 ms (OFF) when external calibration time is selected.
*3
These numbers double when "DOUBLE" is selected.
*4 Use with the over current protection device which is rated 30 V or more and not more than 1 A.
*5 To connect more than 9 units, the power voltage must be 20 V or more.
*6 Increases 30 mW (1 mA) for HIGH SPEED mode.
*7 It increases by 15% when connected to the LV­NH100/NH110/NH300. It does not include the power consumption of the load.
Power consumption when expansion units are connected is the total power consumption of each amplifier unit. Example: When one main unit (LV­N11N) is connected to 2 expansion units (LV­N12N) and they are
used with LV­NH100 heads in HIGH SPEED mode.
(1.15 × 860 mW × 1) + (1.15 × 860 mW × 2) = 2967 mW max.
*8 If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less for a
unit.
One or two more units connected: ­20 to +55 °C ­4 to 131 °F; 3 to 10 more units connected: ­20 to +50 °C ­4 to 122 °F; 11 to 16 more units connected: ­20 to +45 °C ­4 to 113 °F. When using 2­outputs, one unit is
counted as two units.

KEYENCE AMERICA 1­888­539­3623(Toll Free) https://www.keyence.com/ 2022/07/07 Page:1/2

 Data Sheet

Dimensions

* Download CAD file or product manual for larger image/text and more detail.

KEYENCE AMERICA 1­888­539­3623(Toll Free) https://www.keyence.com/ 2022/07/07 Page:2/2