Scribd
Upload
9 views

Ospf and Mac

The document describes configuring IP addresses, OSPF routing protocol and network interfaces on multiple routers and end devices. IP addresses and OSPF are configured on interfaces of routers with IDs 0-6. Static IP addresses are also configured for PC and server end devices.

Uploaded by

Chrissa Mea Padolina
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
9 views

Ospf and Mac

The document describes configuring IP addresses, OSPF routing protocol and network interfaces on multiple routers and end devices. IP addresses and OSPF are configured on interfaces of routers with IDs 0-6. Static IP addresses are also configured for PC and server end devices.

Uploaded by

Chrissa Mea Padolina
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 14

No.

Switch>en
Switch#conf t
Switch(config)#hostname SW1
SW1(config)#int range f0/3-24
SW1(config-if-range)#shut
SW1(config-if-range)#exit
SW1(config)#exit

(Optional)
Add PC3 for f0/3

No. 2

SW1#en
SW1#conf t
SW1(config)#int f0/1
SW1(config-if)#switchport mode access
SW1(config-if)#switchport port-security
SW1(config-if)#switchport port-security max 2
SW1(config-if)#switchport port-security mac-address 00D0.FF46.191B
SW1(config-if)#exit
SW1(config)#exit

PC1

ipconfig /all - to check the physical address as mac address


No. 3

SW1#en
SW1#conf t
SW1(config)#int f0/2
SW1(config-if)#switchport mode access
SW1(config-if)#switchport port-security
SW1(config-if)#switchport port-security max 2
SW1(config-if)#switchport port-security mac-address 00A.F371.79D1
SW1(config-if)#exit
SW1(config)#exit

PC2

ipconfig /all - to check the physical address as mac address

No. 4

SW1#show port-security address

Vlan Mac Address must be secureconfigured both sides

No. 5

SW1#show port-security int f0/1

Check for last source address vlan


SW1#show port-security int f0/2

Check for last source address vlan

LAST CODE

PC1

ipv4 = 10.10.10.10
subnet mask = 255.255.255.0
default gateway = 10.10.10.1

PC2

ipv4 = 10.10.10.11
subnet mask = 255.255.255.0
default gateway = 10.10.10.1 –
C:\>ipconfig /all

FastEthernet0 Connection:(default port)

Connection-specific DNS Suffix..:


Physical Address................: 0060.3E06.BEA7
Link-local IPv6 Address.........: FE80::260:3EFF:FE06:BEA7
IP Address......................: 0.0.0.0
Subnet Mask.....................: 0.0.0.0
Default Gateway.................: 0.0.0.0
DNS Servers.....................: 0.0.0.0
DHCP Servers....................: 0.0.0.0
DHCPv6 Client DUID..............: 00-01-00-01-67-1E-CA-69-00-60-3E-06-BE-A7

Bluetooth Connection:

Connection-specific DNS Suffix..:


Physical Address................: 00D0.9758.A97B
Link-local IPv6 Address.........: ::
IP Address......................: 0.0.0.0
Subnet Mask.....................: 0.0.0.0
Default Gateway.................: 0.0.0.0
DNS Servers.....................: 0.0.0.0
--More—

C:\>ipconfig /all

FastEthernet0 Connection:(default port)

Connection-specific DNS Suffix..:


Physical Address................: 000C.CFCC.CA38
Link-local IPv6 Address.........: FE80::20C:CFFF:FECC:CA38
IP Address......................: 0.0.0.0
Subnet Mask.....................: 0.0.0.0
Default Gateway.................: 0.0.0.0
DNS Servers.....................: 0.0.0.0
DHCP Servers....................: 0.0.0.0
DHCPv6 Client DUID..............: 00-01-00-01-DC-3D-1D-A3-00-0C-CF-CC-CA-38

Bluetooth Connection:

Connection-specific DNS Suffix..:


Physical Address................: 0001.C745.EA28
Link-local IPv6 Address.........: ::
IP Address......................: 0.0.0.0
Subnet Mask.....................: 0.0.0.0
Default Gateway.................: 0.0.0.0
DNS Servers.....................: 0.0.0.0
--More--
Name HOST 2^N Network Broadcast SNM Usable Host Address
SIZE Address Address

LAN A 16777214 24 10.0.0.0 10.255.255.255 /8 10.0.0.1 -10.255.255.254

LAN B 16777214 24 20.0.0.0 20.255.255.255 /8 20.0.0.1-20.255.255.254

WAN A 2 2 192.168.0.0 192.168.0.3 /30 192.168.0.1-192.168.0.2

WAN B 2 2 192.168.0.4 192.168.0.7 /30 192.168.0.5-192.168.0.6

WAN C 2 2 192.168.1.0 192.168.1.3 /30 192.168.1.1-192.168.1.2

LAN C 2 2 192.168.1.4 192.168.1.7 /30 192.168.1.5-192.168.1.6

LAN D 2 2 192.168.1.8 192.168.1.11 /30 192.168.1.9-192.168.1.10

WAN D 2 2 192.168.2.0 192.168.2.3 /30 192.168.2.1-192.168.2.2

WAN E 2 2 192.168.2.4 192.168.2.7 /30 192.168.2.5-192.168.2.6

WAN F 2 2 192.168.2.8 192.168.2.11 /30 192.168.2.9-192.168.2.10

Table 1: Variable Length Subnet Mask


Table 2: Network Interface Addressing

Device Name Interface IP Address Subnet Default Gateway

Router 0 LAN C1 Fa0/0 192.168.1.1 255.255.255.252 N/A


LAN A1 Fa0/1 10.0.0.1 255.0.0.0 N/A
WAN Se0/0/0 192.168.0.1 255.255.255.252 N/A
A1
WAN Se0/0/1 192.168.2.1 255.255.255.252 N/A
D1
Router 1 WAN Se0/0/1 192.168.0.2 255.255.255.252 N/A
A2
WAN B1 Se0/0/0 192.168.0.5 255.255.255.252 N/A

Router 2 WAN B2 Se0/0/1 192.168.0.6 255.255.255.252 N/A

WAN C1 Se0/0/0 192.168.0.9 255.255.255.252 N/A

Router 3 WAN Se0/0/0 192.168.2.2 255.255.255.252 N/A


D2
WAN E1 Se0/0/1 192.168.2.5 255.255.255.252 N/A

Router 4 WAN E2 Se0/0/0 192.168.2.6 255.255.255.252 N/A

WAN F1 Se0/0/1 192.168.29 255.255.255.252 N/A


Router 5 LAN C2 Fa0/1 192.168.1.2 255.255.255.252 N/A
LAN D1 Fa0/0 192.168.1.5 255.255.255.252 N/A
Router 6 LAN D2 Fa0/1 192.168.1.6 255.255.255.252 N/A
LAN B1 Fa0/0 20.0.0.1 255.0.0.0 N/A
WAN C2 Se0/0/1 192.168.0.10 255.255.255.252 N/A
WAN F2 Se0/0/0 192.168.2.10 255.255.255.252 N/A
PC 0 10.0.0.2 255.0.0.0 10.0.0.1
Server 0 20.0.0.2 255.0.0.0 20.0.0.1
IP ADD

ROUTER 0

router0#en

router0#conf t

router0#(config)# int fa0/1

router0#(config-if)#ip add 10.0.0.1 255.0.0.0

router0#(config-if)# no shut

router0#(config-if)#exit

router0#(config)# int s0/0/0

router0#(config-if)#ip add 192.168.0.1 255.255.255.252

router0#(config-if)# clock rate 64000

router0#(config-if)# no shut

router0#(config-if)# exit

router0#(config)# int s0/0/1

router0#(config-if)#ip add 192.168.2.1 255.255.255.252

router0#(config-if)# clock rate 64000

router0#(config-if)#no shut

router0#(config-if)#exit

router0#(config)# int fa0/0

router0#(config-if)#ip add 192.168.1.1 255.255.255.252

router0#(config-if)# no shut
router0#(config-if)# exit

OSPF

ROUTER#0

en

conf t

router ospf 1

network 10.0.0.0 0.255.255.255 area 0

network 192.168.0.0 0.0.0.3 area 0

network 192.168.1.0 0.0.0.3 area 0

network 192.168.2.0 0.0.0.3 area 0

exit

exit

ROUTER#1

en

conf t

router ospf 2

network 192.168.0.0 0.0.0.3 area 0

network 192.168.0.4 0.0.0.3 area 0

exit

exit

ROUTER#2

en
conf t

router ospf 3

network 192.168.0.4 0.0.0.3 area 0

network 192.168.0.8 0.0.0.3 area 0

exit

exit

ROUTER#3

en

conf t

router ospf 4

network 192.168.2.0 0.0.0.3 area 0

network 192.168.2.4 0.0.0.3 area 0

exit

exit

ROUTER#4

en

conf t

router ospf 5

network 192.168.2.4 0.0.0.3 area 0

network 192.168.2.8 0.0.0.3 area 0

exit

exit

ROUTER#5
en

conf t

router ospf 6

network 192.168.1.0 0.0.0.3 area 0

network 192.168.1.4 0.0.0.3 area 0

exit

exit

ROUTER#6

en

conf t

router ospf 7

network 20.0.0.0 0.255.255.255 area 0

network 192.168.1.4 0.0.0.3 area 0

network 192.168.2.8 0.0.0.3 area 0

network 192.168.0.8 0.0.0.3 area 0

exit

exit

END DEVICES

nd Devices

PC0

Ipv4 = 10.0.0.2

Subnet Mask = 255.0.0.0

Default Gateway = 10.0.0.1


Server 0

Ipv 4 = 20.0.0.2

Subnet Mask = 255.0.0.0

Default Gatway = 10.0.0.1

You might also like