Contents Page

EP - Series - Alphabet 4
Position of gear case
General description 5
........R1
Selection of gearbox 6/7

Ratings

Type Helical Gear Units 8

PB .............. Single stage PC ......... 2 stage

PD .............. 3 stage PE ........ 4 stage

Dimensions

PB–R1 ........ PE–R1 14

PC–S5 ....... PE–S5 32
PC–T6 ....... PE–T6 38

Ratings

Type Bevel-Helical Gear Units 44

PLB ............ 2 stage

PLC ............ 3 stage PLD ...... 4 stage

Dimensions

PLB–R1 ..... PLD–R1 48

PLC–S5 ..... PLD–S5 58
PLC–T6 ..... PLD–T6 62
PLC-U3 ...... PLD–U3 66

Ratings

Type Compact Drive (Bevel-Helical) 74

PWC .......... 3 stage PWD ......4 stage

Dimensions

PWC–R1 ..... PWD–R1 78

PWC–S5 ..... PWD–S5 86
PWC–T6 ..... PWD–T6 90
PWC-U4 ...... PWD–U4 94

Exact ratio 102

Additional shafts 107
Backstop 110
Hollow shaft 112
Motor Attachement 114
Additional cooling 120
Torque reaction arm 124
Fixing holes of gear case 125

2
 Position of gear case

....–S5 ....–T6 ....–U3/U4

3
EP – Series – Alphabet

B Helical gear unit, 1 stage

C Helical gear unit, 2 stage
D Helical gear unit, 3 stage
E Helical gear unit, 4 stage
F Flange shaft (output)
G Hollow shaft with shrink disc
H Hollow shaft with key-way

J Motor bracket, base plate

K Motor bell housing

L Bevel pinion shaft on centre line of output shaft

M Adjustable motor base

P Gear case, sizes 10...31 one-piece

Sizes 35 ....67 : Gear Case - split

R1 Position of gear case - horizontal, mounting

Surface 1 downward
S5 Gear case vertical mounting with horizontal shafts, mounting surface
5 downward, high speed shaft upward
T6 Gear case vertical mounted with horizontal shafts, mounting surface
6 downward, high speed shaft downward
U3 Position of gear case and output shaft - vertical mounting surface
3 downward
U4 Position of gear case and output shaft - vertical, mounting surface
4 downward
V Solid output shaft
W Bevel pinion shaft, right angle to output shaft
Z Additional cooling

Designation of mounting surfaces of

gear case (1....6),permissible
position see dimension sheets.

4
Helical Gears / Bevel Helical Gears

EP - Series Casing ● second radial shaft seal with

intermediate grease-filled chamber
Is a totally newly developed gear pro- ● One piece casing for sizes 14 to 31
● greased labyninth seals (with radial
gram One piece casing = great rigidity, mini-
shaft sealing ring)
in acc. with the latest technology mum volume, high thrust loads possible
● non-contact seal
as there are no parting lines
● The ELECON quality assurance system
● Built-in space for large roller bearings Maintenance cover with reusable seal
for design, development, production,
● Easy to assemble and take apart
assembly, after-sales service in acc. with Lubrication
● Design in accordance with the latest
DIN ISO 9001 (EN 29001) registration no.
trends in accoustics – Gear wheels and roller bearings are
041004756 TUV CERT guarantees a
splash lubricated as standard
uniformly high standard. Material: grey cast iron casting,
– Standardized injection lubrication
EP - Series – Nodular cast iron and welded casing on systems with shaft or motordriven pump
request are available as options
Is an Intelligent gear concept
● split casing from size 35 onward. – Oil dipstick as standard for horizontal
● because it answers the purpose with fewer gears, otherwise oil sightglass
Shafts
but more versatile parts (high degree of
Cooling
standardisation and the use of common Available as standard on the output shaft:
parts size to size gives optimum availabil- Additional cooling devices available as stan-
● Solid shaft
ity and short delivery times) dard:
● Solid through shaft
● because the sizes encompass smaller
● Hollow shaft with feather key ● mechanical air cooling
ranges and also the permissible torque
● Hollow shaft with shrink disc ● cooling coil
with increasing size are in smaller bands
● external oil cooler
● because it offers more advantages owing Available as standard on the input shaft:
(oil/air cooler and oil/water cooler)
to
● Shaft with 1 and 2 shaft ends (on helical
● faster delivery times Torque Arms
gears)
● more variable and universal possible ap-
● Type PLD (Bevel helical gears) with 1 to available on request
plications and
3 drive shafts
● greater standardisation of the series (mass Motor consoles
production from a constructiuon kit) Couplings
available as standard
Construction Types On the output shaft suitable for standard out-
Back Stops
put shafts and gear torques:
● 1 to 4 stage helical gears
available as standard
● 2 to 4 stage bevel helical gears – Flexible couplings
● 19 sizes follow, the modular concept – Gear coupling Accessories
– Other coupling types on request
Construction and Structural Shapes – Heating element
on the input shaft suitable for standard drive – Operational monitoring systems (among
● for horizontal, vertical and standing de-
shafts and gear torques : others for speed and torque)
sign
– Diagnostic systems
● spiral bevel spur gears as compact drives – Flexible couplings
● with motor bell housing – Gear coupling General information
● with back stop – Fluid coupling
● Information sheets available as CAD
● with auxil. drive with overriding clutch – Other coupling types on request
files for various computer systems and
● with flange for output side additions such
Motors interfaces
as stirrer bell housing
● Computer programs for drive selection
Suitable motors of renowned make from the
Output Torques
ELECON-EP-Series catalogue program, refer Delivery - Putting into Operation
T2: up to 480,000 Nm page No. 114 to 119.
Delivery without oil, oil type and quantity ac-
Ratios Roller Bearings cording to rating plate.
– iN = 1.25 ... 710, Long life roller bearings Standard conservation with normal transport
– iN > 710 through a combination of conditions sufficient for a period of 6 months.
Seals
EP - Series gears or a combination of
Setting up and putting into operation in ac-
EP - Series with other gears Standard seal systems available for input and
cordance with instruction manual.
output shafts:
Gears
● Radial shaft sealing rings in various ma- The protection from contact with moving parts
● Helical gears for reduced noise, case terials required by law is not included in the supply.
hardened (in our own hardening bay) and ● Radial shaft sealing rings with additional (Exception : hollow shaft gears are delivered
ground dust lip with protective cover for the shrink disc).
● Profile corrections for optimum inertia
quality
● Spiral bevel gears (cyclo-palloid tooth
form) hardened and lapped or ground
● Calculation checks possible in accordance
with DIN 3990, AGMA and classification
Company standards

5
Gear Unit application factors
Gear unit application factors are in line
with DIN standard no. 3990 part 11 (edition Table 1 : Gear unit application Intermitt. Shlfts Table 1 : Gear unit application Intermitt. Shlfts
2/89) and are based on our experience for factor fk Use factor fk Use
normal operating conditions. 1) (0.5 h) 2) 1) (0.5 h) 2)
Changes in the necessary drive selection
may take place after stating the exact Food Industry Machinery Reversing blooming mills 2.5
Beet sugar production Reversing plate mills 1.8
operating conditions. -Beet washing machines & cutters 1.5 Reversing sheet mills 2
Table 1 : Gear unit application Intermitt. Shlfts -Slicing machines 1.2 Reversing Slabbing mills 2.5
factor fk Use -Juice boilers & refrigerators 1.4 Reversing wire mills 1.8
1) Bottling & container filing machines 0.8 1.25...1.5 Rod reel & belt winders 1.5
(0.5 h) 2)
Flour bucket elevators 0.8 1.0...1.25 Roll adjustment devices 1.5
Blowers, Ventilator
Air Cooler 1.4...1.5 Kneading machines 1 1.25...1.5 Roll weighting drives 0.91
Axial blowers 0.8 1.0..1.25 Mash tubs 1 1.25...1.5 Roller straighteners 1.6
Cooling tower fans 1.6...1.7 Packaging machines 0.8 1.0...1.25 Roller tables continuous 1.5
Heat exchangers 1.5 Sugar cane crushers 1.25...1.5 Roller tables intermittent 2
Rotary piston blowers 1 1.25..1.5 Sugar cane knives (3) 1.7 Sintering belt drives 1.5
Suction draught blower 1 1.25...1.5 Sugar cane mills (3) 1.7 Straightening & transp. equipment 1.5
Turbo exhauster 0.8 1.0...1.25 Generators, Converters (3) Thin sheet rolling trains 2
Cableways Frequency converters 1.8...2.0 Transfer skids 1.5
Continuous ropeways 1.4...1.6 Generators 0.8 1.0...1.25 Tube reverse equipment 1.8
Freight ways 1.3...1.4 Welding generators 1.5 1.75...2.0 Turntables (Contin. casting) 1.5
Shuttle cableways 1.4...1.8 Metal Working Machines Walking beam conveyors 2
T-bar lifts 1.3...1.4 Crank Presses 1.75...2.0 Winders 1.6
Cement Industry Forging presses 1.75...2.0 Working roller tables 2
Concrete mixers 1.5 Hammers 1.75...2.0 Rubber and plastic Industry Machinery
Crushers 1.2...1.4 Plate bending machines 1.25...1.5 Calenders 1.5
Roller mills 2 Plate straightening presses 1.75...2.0 Extruders 1.5
Rotary kilns 2 Roller levellers 1.6 Kneading machines 1.8
Separators 1.6 Stamping presses 1.75...2.0 Mixers 1.0...1.4 1.3...1.7
Tube mills 1.8 Matallurgical Industry Rolling mills 2
Chemical Industry Blast furnace blowers 1.25...1.5 Rotary Cooler 1.3...1.4
Agitators for materials Converters 1.75...2.0 Textile Machines
with constant density 1 1.3...1.5 Inclined furnace hoists 1.75...2.0 Calender 1 1.25...1.5
with variable density 1.2 1.4...1.6 Mining, Stone an Clay Working Machines Looms 1 1.25...1.5
Agitators with variable gas absorbt. 1.4 1.6...1.8 Conical crushers 2 Printing and dyeing machines 1 1.25...1.5
Centrifuges 1 1.25..1.35 Endless chain transporters 1.5 Take-up rollers 1 1.25...1.5
Drying kilns 1.5 Jaw breakers 2 Willows 1 1.25...1.5
Kneading machines 2 Jolters 1.5 Water Treatment
Toasters 1 1.3...1.5 Mine ventilating fans 1.5 Circular and longitudinal rakes 1 1.3...1.5
Compressors Rolling crushers 1.5 Filter Presses 1 1.3...1.5
Piston compressors 1.8...1.9 Rotary crushers 2 Flocculation agitators 0.8 1.0...1.3
Rotary compressors 1.4...1.5 Rotary kilns 2 Pre-thickners 1.1...1.3
Turbo compressors 1 1.25...1.5 Separators 1.5 Raking equipment 1 1.2...1.3
Conveyors Toothed roll crusher 2 Rotary aerators 1.5...1.7
Apron Conveyors 1.2...1.5 Tub-pushing devices 1.5 Screw pumps 1.3...1.4
Band elevators 1 1.25...1.5 Oil Industry Thickeners 1.2
Belt conveyors 1.0...1.1 1.2...1.4 Charging filter pumps 1.25...1.5 Water wheels 2
Bucket conveyors 1.2...1.5 Flush boring pumps 1.25...1.5 Wood Working Machines
Canvas belt elevators 1 1.25...1.5 Pipeline pumps 1,25...1,5 Barkers 1.5 1.75...2.0
Cellular bucket belt conveyors 1 1.25...1.5 Rotary drilling equipment 1.5 1.75...2.0 Planing machines 1 1.25...1.5
Chain bucket elevators 1 1.25...1.5 Paper machines for all types 1.8...2.5 Saw frames 1.5 1.75...2.0
Circular conveyors 1 1.25...1.5 Presses 3) 1.0...1.1
Escalators 1 1.2...1.4 pumps
Goods lifts 1.2...1.5 Centrifugal pumps 1 1.2...1.3
Hoisting engines 1.5...1.8 Charge pumps 1.5 1.75...2.0
Piston pumps 1.2...1.3 1.4...1.8 Table 2 : Operating Frequency factor fE
passenger lifts 1.5...1.8
Rail travelling devices 1.5 Plunger pumps 2 2 1.6 1.4 1.2 1.1 1
Scraper chain conveyors 1 1.25...1.5 Sludgers 1 1.25...1.5
With...load peaks per hour
Screw conveyors 1 1.25...1.5 Rolling Mills
Sinking mine machines 1.5 1.75...2.0 Belt winders 1 1.25...1.5 1 2-10 11-20 21-50 51-100 >100
Steel belt conveyors 1 1.25...1.5 Billet shears 2
Winders 1.4 1.6 Blooming and slabbing mills 2 Table 3 : Reversal factor fR
Capstan wheels 1.5
Cranes Classified acc. to FEM 1001 1.0 0.85 0.7
Crushers Chain transfer 1.5
Ball crushers 1.75...2.0 Cold band rolling mills 3) 1.75..1.85 Steady direction Alternating Reversing
Hammer mills 1.75...2.0 Cooling bed transfer frames 1.5 of load direction of load operations
Rebound crushers 1.75...2.0 Continuos casting drivers 3) 1.4
Rod mills 1.75...2.0 Continuous shears 3) 1.5
Roller mills 2 Crank type shears 1 1
Swinging crushers 1.75...2.0 Cropping shears 2
De-scaling breakers 2
1) Application factors apply to the following
Tube mills 1.8 driving motors : electric motors, turbines
Drawing bench drives 2
Dredgers
Bucket chain drives 1.75..1.85 High speed roller tables 1.5 and fluid power motors. When combustion
Bucket wheels 1.75...2.2 Ingot conveyors 2 engines are the driving force, enquiries
Cutter heads 2.2 Ingot pushers 1.2 have to be made.
Looper 1.5
Dumping devices 1.3...1.5 2) The lower table value is for single shift
Loop lifter 1.5
Manoeuvring winches 1 1.25...1.5 operation and for lighter applications, the
Slewing gears 1.4...1.8 Low speed roller tables 1.5
Plate rolling trains 2 upper table value is for continuous use
Sucking pumps 1 1.25...1.5
Plate shears 2 and heavier applications.
Travelling gears (caterpillar) 1.2 1.6...1.8
Travelling gears (rails) 1 1.25...1.5 Plate tilters 1 1.0...1.2 3) Design is in accordance with maximum
Plate trimming shears 1.5 torque.

6
Gear Unit Selection

● Establish the type of gear unit and n1 [min–1] Input speed Pt [kW] Thermal capacity
mounting arrangement
n2 [min–1] Output speed
n Pt0 [kW] Thermal capacity for drive
● Ratio isolf = 1
n2 isoll Desired ratio without additional cooling
● Selection of the appropriate nominal
ratio iN (for the actual ratio iw page iN Nominal ratio Pt1 [kW] Thermal capacity with air
106 and follow.) cooling
iW Actual ratio
● Determine the gear unit size. Check
the gear unit power Pt3 [kW] Thermal capacity with
PM [kW] Motor power
PN ≥ Pe . fk cooling coil
fk = Gear unit application factor, PN [kW] Nominal power output
see table 1 (page 6) Pt4 [kW] Thermal capacity with air
Pe [kW] Effective power of machine cooling and cooling coil
Cheking the peak torque
to be driven
PN
Tmax ≤ 9550 .f .f fW Thermal factor
n E R fK Gear unit application factor
fE = Operating frequency factor, fA Load factor
see table 2 (page 6) fE Operating frequency factor
fR = Reversal, factor, table 3 (page 6)
fR Reversal factor ϑU [°C] Ambient temperature
● Determination of the type of cooling
Pt ≥ Pe Tmax [Nm] Start-up or maximum ED [%] Duty cycle per hour
Pt = Pt_ . fW . fA motor or braking torque
The shaft ends are provided with shearing-loadfree couplings for torque
transmission. Ask for explanations for external forces.

Design Example

Machine to be driven : Belt conveyor for Selected : Gear unit PLC25 with PN = 64 kW
freight loading 4. Checking the peak torque :
Required output power : Pe = 44 kW P
Speed : n2 = 28 min–1 Tmax ≤ 9550 nN .fE.fR
Duty cycle : ED = 100 %
Starts per hour : 10 With operating frequency factor fE from table 2 : fE = 1.6
Daily operating time : 24 hours/day
Ambient temperature : ϑU = 30 °C With reversal factor fR from table 3 : fR = 1.0

Installation in the open air, constant strong Tmax ≤ 9550. 64 .1.6 . 1.0 = 652 Nm 560 Nm < 652Nm O.K.
blast given. 1500
5. Checking the thermal capacity :
Driving Machine : Pe ≤ Pt with Pt = Pt_ . fA . fW
Three - phase motor
Motor output : PM = 55 kW Pt_: Pt0 Thermal capacity without additional cooling
Motor speed : n1 = 1500 min–1
Max. motor torque : Tmax = 560 Nm Pt1 Thermal capacity with ventilator
(pull-out torque)
Pt3 Thermal capacity with cooling coil
Selection

1. A bevel helical gear unit for horizontal Pt4 Thermal capacity with ventilator and cooling coil
Pe 44
installation in a hollow shaft version with
shrink disc is required. With a duty cycle factor fA from table 5 : fA = 0.96 for PN = 64 . 100% = 69%

2. Ratio :
With thermal factor fW from table 4 : fW = 0.86 for ϑU = 30 °C and ED = 100%
i = n1 / n2 = 1500/28 = 53.6
Nominal ratio : in = 56
Gear units without additional cooling : Pt = 83 . 0.96 . 0.86 = 69 kW
The power data page 49 comes up with type
PLC. With Pt0 = 83 kW from page 50

3. Checking the gear nominal output : Pe = 44 kW < Pt = 69 kW

Required Nominal output
PN ≥ Pe . fk No additional cooling is necessary

Order code : PLC 25 – R1 1 – G 12 – 56

with application factor fk from table 1 :
fk = 1.4 (upper value for continuous use)

PN required ≥ 44 x 1.4 = 61.6 kW

7
Power ratings
Gearbox Size
Type
PB 10 12 16 20 25 31 40 45
n1 n2
iN Nominal Power PN [KW]
[min–1]
1500 1200 120 320 660 1450 2800 4100
1.25 1000 800 80 210 440 970 1850 2750
1.4 1500 1070 110 300 620 1350 2600 3800
1000 715 73 200 410 900 1700 2500
1500 940 105 280 570 1260 2400 3600
1.6
Helical Gear Units, single stage

1000 625 70 190 380 840 1600 2400

1.8 1500 835 96 260 530 1160 2200 3350
1000 555 64 170 350 770 1450 2250
1500 750 89 220 460 1000 2200 3100
2
1000 500 59 145 310 670 1450 2000
2.24 1500 670 80 200 420 920 2000 2800
1000 445 53 130 280 610 1350 1850
1500 600 80 200 420 920 1850 2800
2.5
1000 400 53 130 280 610 1250 1850
1500 535 69 170 350 780 1600 2400
2.8 1000 360 46 110 230 520 1050 1600
1500 475 59 170 350 750 1300 2100
3.15 1000 315 39 110 230 500 850 1400
1500 425 57 140 290 580 1150 1950
3.55 1000 280 38 93 190 390 750 1300
1500 375 47 130 270 520 850 1500 2700 4700
4 1000 250 31 85 180 350 570 1000 1800 3100
1500 335 43 110 230 460 770 1400 2300 4200
4.5 1000 220 29 73 150 310 510 950 1550 2800
1500 300 34 88 180 360 640 1200 2000 3200
5 1000 200 23 59 120 240 420 800 1350 2100
5.6 1500 270 32 82 170 320 590 1000 1800 3000
1000 180 21 55 110 210 390 650 1200 2000

Type Gear box Size

PC 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
n1 n2
iN Nominal Power PN [KW]
[min–1]
1500 375 121 230 542 840 1800 2500
4 1000 250 81 153 360 560 1200 1670
1500 335 108 230 500 840 1750 2500
4.5 1000 220 72 153 360 560 1170 1670
1500 300 98 230 460 770 1600 1800 2500 2500
5 1000 200 65 153 350 513 1070 1200 1670 1670
1500 270 91 230 230 430 540 710 840 1500 1750 2500 2500
5.6 1170 1670
1000 180 58 153 153 310 360 473 560 1000 1670
1500 240 81 115 211 230 400 500 661 840 1430 1600 2300 2500 2500
6.3 1660
Helical Gear Units, two-stage

1000 160 52 85 141 153 270 360 441 560 955 1070 1535 1660
1500 211 72 112 196 230 367 460 600 770 1260 1500 2230 2500 2500
7.1 153 350 513 1670 1670
1000 141 46 75 131 245 400 840 1000 1490
1500 188 64 106 174 232 330 410 570 711 1120 1490 1985 2300 2500
8 1000 125 41 71 116 155 220 310 380 474 746 990 1325 1530 1660
1500 167 57 94 155 206 294 374 538 660 995 1320 1763 2200 2500
9 1000 111 36 63 103 137 196 249 358 440 663 880 1175 1470 1665
1500 150 51 85 139 185 264 358 483 600 895 1200 1590 1980 2300
10 1000 100 33 57 93 123 176 239 322 400 600 800 1058 1320 1530
1500 134 46 76 124 165 236 326 452 589 800 1070 1420 1770 2175
11.2 1000 89 29 51 83 110 157 217 301 391 533 710 945 1180 1450
1500 120 41 68 111 148 211 304 426 527 745 955 1320 1585 1950 2435
12.5 1000 80 26 45 74 99 141 203 284 351 500 640 880 1055 1300 1625
1500 107 37 61 94 132 189 276 373 470 680 853 1180 1415 1740 2175 2685
14 1000 71 23 41 63 88 126 184 249 312 452 570 786 945 1160 1450 1790
1500 94 30 53 81 116 160 242 314 427 560 775 1020 1290 1520 1905 2350
16 1000 63 20 35 54 77 110 161 209 285 370 520 680 860 1015 1270 1565
1500 83 28 47 71 103 145 215 280 392 500 690 878 1170 1355 1690 2050 2590
18 1000 56 18 31 48 69 96 143 187 261 330 460 590 780 900 1130 1365 1730
1500 75 42 93 183 364 596 1010 1270 1825 2330
20 1000 50 28 62 122 243 398 675 845 1220 1555
1500 67 38 82 160 306 533 884 1150 2000
22.4 1000 44.5 25 55 105 204 355 587 770 1335
1500 60 32 74 143 269 1005 1780
25 1000 40 21 49 95 179 670 1185
1500 54 29 875
28 1000 35.5 19 575
8
Power ratings
Type Gearbox Size
PD 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
n1 n2
iN [min–1]
Nominal Power PN [KW]
1500 94 87 300 582 1031 1900 3370
16 1000 63 58 200 388 687 1270 2250
1500 83 73 267 527 917 1690 3000 3630
18 1000 56 49 178 351 611 1127 2000 2420
1500 75 26 64 132 252 447 621 817 1029 1522 1880 2700 3270 3800
20 1000 50 17 43 88 168 298 414 545 686 1015 1253 1800 2180 2530
1500 67 23 62 83 118 238 294 416 554 737 937 1360 1680 2080 2410 2805 3390
22.4 1000 44.5 15.2 41 55 79 159 195 277 369 491 625 906 1120 1387 1605 1870 2260
1500 60 19.5 53 74 103 155 213 264 380 477 660 808 1013 1220 1474 1865 2160 2614 2890
25 1000 40 13 35 49 69 103 142 176 253 318 440 539 675 812 983 1243 1440 1743 1930
1500 54 18 46 66 93 130 180 256 322 443 584 735 922 1090 1342 1600 1930 2334 2710
Helical Gear Units, three-stage

28 1000 35.5 12 29 39 62 87 120 171 209 295 389 490 615 725 895 1070 1285 1556 1807
1500 47.5 16 27 41 59 84 113 160 235 284 394 502 666 796 966 1193 1480 1700 1995 2410
31.5 1000 31.5 11 18 27 39 56 75 107 157 189 263 333 444 531 644 795 987 1130 1330 1606
1500 42.5 14 24 37 52 74 101 150 208 267 338 465 569 713 858 1040 1313 1520 1780 2035
35.5 1000 28 9.3 16 25 35 49 67 100 139 178 223 310 379 475 572 692 875 1013 1172 1360
40 1500 37.5 12.2 20 32 46 65 97 126 172 224 300 409 495 645 761 912 1120 1350 1634 1800
1000 25 8.1 13.3 21 31 43 65 84 115 149 200 273 330 430 507 608 748 900 1090 1200
1500 33.5 11 18 29 41 58 81 112 150 200 276 354 466 557 677 835 987 1190 1400 1690
45 1000 22.2 7.3 12 19 27 39 54 75 100 133 184 235 311 371 451 557 658 791 931 1124
1500 30 10 17 28 37 53 71 106 148 186 234 330 404 487 609 737 932 1080 1256 1445
50 1000 20 6.7 11 19 25 35 47 71 99 124 156 220 269 324 406 491 621 720 837 963
1500 27 9.1 15 23 32 47 64 95 123 169 215 295 356 461 544 652 800 963 1170 1300
56 1000 17.9 6.1 10 15 21 31 43 63 82 113 142 197 236 307 363 435 534 642 778 862
1500 23.8 7.7 12.7 20 29 41 61 80 107 142 197 259 327 398 483 596 705 856 1040 1200
63 1000 16 5.2 8.5 13 19 27 41 53 71 95 131 173 218 265 322 397 470 571 691 803
1500 21 7.0 11 18 26 37 51 71 104 126 175 222 295 340 429 529 657 752 885 1070
71 1000 14 4.7 7.3 12 17 24 34 47 69 84 117 148 197 227 286 353 438 501 590 713
1500 18.8 11 16 23 45 60 92 119 149 206 252 317 381 461 583 674 787 903
80 1000 12.5 7.3 11 15 30 40 61 79 99 137 168 211 254 307 389 449 523 602
1500 16.7 9.4 14.3 21 40 56 76 99 133 182 220 284 338 405 498 600 726 804
90 1000 11.1 6.3 9.5 13 27 37 51 66 89 121 146 191 225 270 332 400 484 534
1500 15 7.7 12.9 18 50 67 90 124 158 210 251 304 376 444 534 628 759
100 1000 10 5.1 8.6 12 33 45 60 83 105 140 167 203 251 296 356 419 506
1500 13.4 7.2 17 59 106 180 217 329 416 561 645
112 1000 8.9 4.8 11 39 71 120 144 219 277 372 430
1500 12 15 55 96 158 206 292 359 578
125 1000 8 9.9 37 64 105 137 195 239 385
1500 10.7 13 48 179 317
140 1000 7.1 8.8 32 119 211
1500 9.4 152
160 1000 6.3 102

PE 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
1500 21 37 68 131 232 429 760
71 1000 14 25 45 87 155 286 507
1500 18.8 33 65 119 206 381 674 817
80 1000 12.5 22 43 79 137 254 450 545
1500 16.7 15 29 43 56 100 182 229 338 417 600 726
90 1000 11.1 10 19 29 37 66 121 153 225 278 400 484
1500 15 13 26 37 48 93 124 165 210 304 376 466 540 630 759
100 1000 10 8.7 17 25 32 62 83 110 140 203 251 311 360 420 506
1500 13.4 11.5 24 32 47 63 85 111 147 180 226 272 329 416 482 583 645
112 1000 8.9 7.6 16 21 31 42 57 74 98 120 151 181 219 277 321 389 430
1500 12 10.3 15 21 31 40 55 72 96 131 165 206 244 301 359 432 523 607
125 1000 8 6.6 10 14 21 27 37 48 64 87 110 137 163 201 239 288 349 405
9.9 13 26 89 150 268 333 542
Helical Gear Units, four-stage

1500 10.7 19 36 47 64 113 179 217 384 450

140 1000 7.1 6.6 8.7 13 17 24 31 43 59 75 100 119 145 179 222 256 300 361
1500 9.4 8.2 11.6 17 22 33 44 59 78 103 126 158 190 230 291 337 394 452
160 1000 6.3 5.5 7.8 11 15 22 29 39 52 69 84 105 127 155 194 225 264 301
1500 8.33 7.1 10.3 14 20 28 38 50 66 91 110 143 169 203 249 300 363 400
180 1000 5.55 4.7 6.8 9.6 13 19 25 33 44 61 73 95 113 136 166 200 242 270
1500 7.5 6.4 9.3 13 18 25 34 45 60 79 105 125 152 188 222 269 314 379
200 1000 5 4.3 6.2 8.7 12 17 23 30 40 53 70 83 101 125 148 182 210 253
1500 6.7 6.2 8.3 12 16 22 32 42 55 74 90 109 136 166 208 241 280 323
224 1000 4.46 4.1 5.5 8.0 11 14 21 28 37 49 60 72 91 110 139 161 185 215
1500 6 5.3 7.4 11 14 21 27 38 48 66 79 103 122 146 179 216 261 290
250 1000 4 3.5 4.9 7.3 9.3 14 18 25 32 44 53 69 81 98 119 144 174 195
1500 5.36 5.1 6.6 9.3 14 18 24 32 43 58 74 90 109 134 159 193 233 271
280 1000 3.57 3.0 4.4 6.2 9.3 12 16 21 28 39 49 60 73 89 106 129 155 181
1500 4.76 4.1 5.9 8.2 11 16 21 28 39 50 67 77 97 119 148 171 200 241
315 1000 3.17 2.7 3.9 5.5 8.0 11 14 19 26 34 45 51 65 79 99 114 133 161
1500 4.22 5.2 7.5 10 15 20 27 35 46 57 71 86 104 131 152 177 204
355 1000 2.82 3.5 5.0 6.7 10 13 18 23 31 38 47 57 69 87 101 121 136
1500 3.75 4.6 6.5 9.0 13 17 22 30 41 49 65 76 91 112 135 163 180
400 1000 2.5 3.1 4.3 6.0 8.7 11 15 20 27 33 43 51 61 75 90 109 120
1500 3.35 4.1 5.8 8.1 11 15 20 27 35 47 56 68 83 99 120 140 169
450 1000 2.22 2.7 3.9 5.4 7.3 10 13 18 23 31 37 45 55 66 80 93 113
1500 3 7.2 14 25 40 49 74 93 125 145
500 1000 2 4.8 9.3 17 27 32 49 62 84 97
1500 2.68 6.4 12 21 35 46 65 80 130
560 1000 1.79 4.3 8,0 14 24 31 44 53 86
1500 2.38 11 19 40 71 115
630 1000 1.59 7,3 13 27 47 77
1500 2.1 34
710 1000 1.4 23

9
Thermal Capacity
Type PB.. -R1
Average air n1 Gearbox Size
speed (min–1) 10 12 16 20 25 31*) 40 45
Pto [kW] / without add. cooling
VW = 0.5 m/s 1) - 46 77 127 179 234 318
VW = 1.2 m/s 2) - 65 110 182 256 334 454 on request
VW = 4.0 m/s 3) - 85 143 237 333 434 590
Pt1 [kW] / with fan
- 1500 110 213 354 497 650 883*)
-
on request
1000 82 158 263 370 484 657*)
Pt3 [kW] / with cooling coil
VW = 0.5 m/s 1) - - 177 505 691 1053 1415
VW = 1.2 m/s 2) - - 210 560 768 1153 1551 on request
VW = 4.0 m/s 3) - - 243- 615 845 1253 1687
Pt4 [kW] / with fan and cooling coil
1500 - 314 732 1009 1469 1979
on request
1000 - 234 545 751 1093 1472
Pt8 [kW] / with 2 cooling coils
VW = 0.5 m/s 1) - - 277 883 1203 1872 2512
VW = 1.2 m/s 2) - - 310 938 1280 1972 2648 on request
VW = 4.0 m/s 3) - - 343 993 1357 2072 2784
Pt9 [kW] / with fan and 2 cooling coils
- 1500 - 413 1110 1521 2288 3077*)
on request
- 1000 - 358 1019 1394 2122 2851*)
*) Values for Pt1 , Pt4 & Pt9 applicable for Gearbox size 31 only for in = 3.55 …5.6
VW = 0.5 m/s 4 4 4
Values of Pt0 & Pt3 meant for gearbox sizes 20 to
VW = 1.2 m/s 31 are applicable from ratios as indicated 2.5 2.5 2.5
VW = 4.0 m/s (For smaller ratio, consult ELECON) 2.24 2.24 2.24

Type PC..-R1
Average air n1 Gearbox Size
speed (min–1) 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
Pt0 [kW] / without add. cooling
VW = 0.5 m/s 1) - 30 40 50 64 78 94 111 132 149 191 216 260 315
VW = 1.2 m/s 2) - 42 55 70 89 108 130 154 184 207 265 300 361 437 on request
VW = 4.0 m/s 3) - 54 71 90 114 138 166 197 236 265 339 384 462 559
Pt1 [kW] / with fan
- 1500 82 108 136 173 210 252 299 359 403 515 583 702 850
on request
- 1000 61 80 101 129 156 187 222 267 299 383 433 522 632
Pt3 [kW] / with cooling coil
VW = 0.5 m/s 1) - 85 163 113 232 246 414 347 576 469 876 728 945 1000
VW = 1.2 m/s 2) - 97 178 133 257 276 450 390 628 527 950 812 1046 1122 on request
VW = 4.0 m/s 3) - 109 193 153 282 306 486 433 680 585 1024 896 1147 1244
Pt4 [kW] / with fan and cooling coil
- 1500 137 231 199 341 378 572 535 803 723 1200 1095 1387 1535
- on request
1000 116 203 164 297 324 507 458 711 619 1068 945 1207 1317
Pt0 and Pt3-meant for gearbox sizes 22-47 are applicable from ratios indicated. (For smaller ratios consult ELECON).

VW = 0.5 m/s 8 8 8 8 12.5 12.5 12.5 12.5 12.5

VW = 1.2 m/s 4 5.6 4 5.6 7.1 7.1 9 9 9
VW = 4.0 m/s 4 5.6 4 5.6 5 5 6.3 6.3 6.3

1) Small closed room, little air movement

2) Large hall with free air movement
3) Constantly strong air movement

Table 4 : fw : Thermal Factor Thermal capacities of types PC-S5 and -T6 on request
ED %
υ u[°C]
100 80 60 40 20
Table 5 : fA : Utilization Factor
10 1.14 1.21 1.34 1.53 2.03
Utilization Pe / PN [%]
20 1.00 1.06 1.17 1.34 1.78
30 0.86 0.91 1.00 1.15 1.53 20 30 40 50 60 70 80 90 100
40 0.71 0.76 0.84 0.96 1.27 0.7 0.8 0.86 0.9 0.93 0.96 0.98 0.99 1
50 0.57 0.61 0.67 0.77 1.02 For values less than 20% consult ELECON

10
Thermal Capacites

Type PD.. -R1

Average air n1 Gearbox Size
speed (min–1)
14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
Pto [kW] / without add. cooling
VW = 0.5 m/s 1) - 20 27 34 42 52 62 73 89 111 127 144 174 210 210 248 302 312 357 404
VW = 1.2 m/s 2) - 28 37 47 59 72 86 102 123 154 177 200 241 291 291 344 420 434 496 561
VW = 4.0 m/s 3) - 36 47 60 76 92 110 131 157 197 227 256 308 372 372 440 538 556 635 718
Pt1 [kW] with fan
- 1500 54 72 91 115 140 168 199 239 300 343 389 468 566 566 669 817
on request
- 1000 40 53 68 85 104 125 148 178 223 255 289 348 421 421 497 607
Pt3 [kW] / with cooling coil
VW = 0.5 m/s 1) - 57 109 76 154 134 276 231 385 325 584 485 631 667 780 986 1040 1050 1095 1142
VW = 1.2 m/s 2) - 65 119 89 171 154 300 260 419 368 634 541 698 748 861 1082 1158 1172 1234 1299
VW = 4.0 m/s 3) - 73 129 102 188 174 324 289 453 411 684 597 765 829 942 1178 1276 1294 1373 1456
Pt4 [kW] / with fan & cooling coil
- 1500 91 154 133 227 222 382 357 535 514 800 730 925 1023 1136 1407 1555
on request
- 1000 77 135 110 197 186 339 306 474 437 712 630 805 878 991 1235 1345

VW = 0.5 m/s) 20 20 22.4 22.4 22.4 28 28 28 31.5 31.5 31.5

Pto and Pt3 - meant for gear box sizes 35 - 67 are applicable from
VW = 1.2 m/s) ratios indicated (For small ratios, consult ELECON) 16 20 16 20 25 20 20 22.4 22.4 22.4 22.4
VW = 4.0 m/s) 16 20 16 20 25 16 20 22.4 16 18 20

Type PE.. -R1

Average air n1 Gearbox Size

speed (min-1) 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
Pto [kW] / without add. cooling
Vw = 0.5 m/s 1) - - - 25 32 39 47 55 66 84 95 108 130 157 157 186 227 235 268 302
Vw = 1.2 m/s 2) - - - 35 44 54 65 77 92 116 132 150 180 218 218 258 315 326 372 420
Vw = 4.0 m/s 3) - - - 45 56 69 83 99 118 148 169 192 230 279 279 330 403 417 476 538
Pt3 [kW] / with cooling coil
Vw = 0.5 m/s 1) - - - 57 116 101 207 173 288 244 438 364 473 500 585 740 781 789 822 856
Vw = 1.2 m/s 2) - - - 67 128 116 225 195 314 276 475 406 523 561 646 812 869 880 926 974
Vw = 4.0 m/s 3) - - - 77 140 131 243 217 340 308 512 448 573 622 707 884 957 971 1030 1092

1) Small closed room, little air movement

2) Large hall with free air movement
3) Constantly strong air movement

Table 4 : fw : Thermal Factor Thermal capacities of types PD.. PE-S5 and -T6 on request
ED %
υ u[°C]
100 80 60 40 20
Table 5 : fA : Utilization Factor
10 1.14 1.21 1.34 1.53 2.03
Utilization Pe /PN [%]
20 1.00 1.06 1.17 1.34 1.78
30 0.86 0.91 1.00 1.15 1.53 20 30 40 50 60 70 80 90 100
40 0.71 0.76 0.84 0.96 1.27 0.7 0.8 0.86 0.9 0.93 0.96 0.98 0.99 1
50 0.57 0.61 0.67 0.77 1.02 For values less than 20% Consult ELECON.

11
Nominal Output Torques

Helical Gear Units, one-stage

Type Gearbox Size

PB 10 12 16 20 25 31 40 45

iN Nominal Output Torques / T2N [kNm]

1.25 0.96 2.55 5.25 11.5 22.3 32.6
1.4 0.98 2.67 5.53 12.0 23.2 33.9
1.6 1.07 2.85 5.81 12.8 24.4 36.7
1.8 1.10 2.98 6.07 13.3 25.2 38.4
2 1.13 2.80 5.86 12.7 28.0 39.5
2.24 1.14 2.85 5.99 13.1 28.5 39.9
2.5 1.27 3.18 6.69 14.6 29.4 44.6
2.8 1.23 3.03 6.24 13.9 28.5 42.8
3.15 1.18 3.41 7.02 15.0 26.1 42.1
3.55 1.29 3.16 6.55 13.1 26.0 44.1
4 1.20 3.31 6.88 13.2 21.6 38.2 68.8 120
4.5 1.23 3.15 6.59 13.2 22.1 40.1 65.6 120
5 1.08 2.80 5.73 11.5 20.4 38.2 63.7 102
5.6 1.14 2.92 6.06 11.4 21.0 35.7 63.7 106

Helical Gear Units, two-stage

Type Gearbox Size

PC 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67

iN Nominal Output Torques T2N [kNM]

4 5.86 13.8 21.4 45.8 63.7

3.10
4.5 6.59 14.3 24.1 50.1 71.6
5 3.12 7.32 14.6 24.5 50.9 57.3 79.6 79.6
5.6 8.20 8.20 15.3 19.3 25.3 29.9 53.5 62.4 89.1 89.1
6.3 4.61 8.48 9.23 16.0 20.1 26.5 33.7 64.2 92.3 100 100
7.1 5.10 8.85 10.4 16.6 20.8 27.1 34.8 67.8 113 113
8 20.9 29.0 36.2 71.8 117 127
57.0
9 3.26 21.4 37.8 101 143
10 8.86 22.8 30.8 38.2 126 146
16.8
11.2 23.2 32.2 76
12.5 24.2 33.9 42.0 59.3
105
14 5.41 8.36 11.8 33.2 60.4 155
16 3.10 24.6 43.5 104 131 194 239
8.20 16.5 32.0 57.0 79
18 3.16 44.9 101 134
235 297
20 23.3 46.4 129 161
76
22.4 21.4 43.7 126 164
286
25 22.8 42.8 160
28 5.10 155
12
Nominal Output Torques

Helical Gear Units, three-stage

Type Gearbox Size
PD 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
iN Nominal Output Torques T2N [kNm]

16 8.86 27.6 59.3

18 8.36 30.8 60.4
416
20 8.20 32.0 57.0 131
3.26 16.8 79.0 105 239 483
22.4 8.86 37.5 59.3 134 400
33.9 297
25 3.10 8.36 24.6 42.0 60.4 76.0 161 235 460
16.5 131 416
28 3.16 23.3 45.7 57.0 164 286
8.20 32.0 79.0 239 483
31.5 101 134
3.26 5.41 16.8 22.8 47.0 161 297 400
35.5 8.36 33.9 60.4 129
76.0 105 235 460
40 3.10 24.6 43.7 126 164 194 343 416
5.10 8.20 16.5 32.0 57.0 286
45 3.16 23.3 42.8 79.0 101 134 160 239 483
400
50 8.86 47.0 59.3 129 155 297
3.26 5.41 8.36 16.8 22.8 33.9 76.0 235 460
56 11.8 43.7 60.4 105 126 164
286 416
63 3.10 24.6 42.8 131 160
5.10 8.20 16.5 32.0 57.0 79.0 239 483
71 3.16 23.3 101 134 155
47.0 297 400
80 8.36 30.8 60.4 129 161
5.41 22.8 76.0 105 235 460
90 43.7 126 164 416
8.20 32.0 57.0 286
100 42.8 79.0 101 134 160 239 483
5.10 400
112 42.0 129 155 297
76.0 235 460
125 43.7 126 164
286
140 42.8 160
160 155

Helical Gear Units, Four-stage

Type Gearbox Size

PE 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
iN Nominal Output Torques T2N [kNm]

71 30.8 59.3
16.8
80 33.2 60.4
416
90 8.86 16.5 24.6 32.0 57.0 131
105 239
100 8.36 23.3 30.8 42.0 59.3 134 400 483
16.8 79.0 297
112 22.8 33.2 45.2 60.4 161 235 460
8.20 131 416
125 24.6 43.7 76.0 164 286
16.5 32.0 57.0 239 483
140 8.86 23.3 42.0 101 134
79.0 161 297 400
160 8.36 16.8 33.2 45.2 60.4 129
22.8 235 460
180 43.7 105 126 164 194 343 416
8.20 16.5 32.0 57.0 76.0 101 286
200 23.3 42.8 134 160 239 483
400
224 8.86 11.8 30.8 45.2 59.3 79.0 129 155 297
16.8 22.8 33.2 105 126 235 460
250 8.36 43.7 60,4 164
76.0 286 416
280 24.6 32.0 42.8 131 160
8.20 16.5 57.0 239 483
315 23.3 42.0 101 134 155
79.0 297 400
355 16.8 33.2 45.2 60.4 129 161
22.8 105 235 460
400 43.7 126 164 416
16,5 32.0 57.0 76.0 286
450 23.3 42.8 101 134 160 239 483
400
500 45.2 79.0 129 155 297
22.8 235
560 43.7 126 164 460
76.0 286
630 42.8 160
710 155
13
 900-0121-MB 1/3
Dimensions 3.99

Type PB 10-R1 … PB 45-R1

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

d1, d2 30 35 40..50 60..80 ≥ 95

Tapped centre holes in shaft ends

DIN 332 Form DS M 10 M 12 M 16 M 20 M 24 Keys to DIN 6885/1 supplied by ELECON

Type of protection as per IP 55

Input shaft Output Shaft

Type ∅ d1 ∅ d2 Weight Oil filling
∅ d1
iN m6 k1 I1 iN m6
k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [I] *
PB 10 35 k6 226 100 30 k6 226 100 126 – 45 k6 246 120 126 - 70 4.5
PB 12 50 k6 280 120 40 k6 280 120 160 165 60 305 145 160 165 140 10
PB 16 70 338 145 50 k6 318 125 193 205 80 363 170 193 195 270 20
1.25... 3.55...
PB 20 80 396 170 65 371 145 226 235 95 396 170 226 235 430 40
PB 25 3.15 100 495 215 5.6 80 450 170 280 295 120 495 215 280 300 750 70
PB 31 130 582 250 100 547 215 332 368 140 582 250 332 328 1200 120
PB 40 160 680 290 130 640 250 390 440 165 695 290 405 400 2000 120
PB 45 180 790 330 160 750 290 460 540 185 805 330 475 440 3250 160

Fitting
Type a b6 c e e8 f h n n6 p p2 t t1 t2 u v w1 w2
–0.2 ∅s ds x lmax
PB 10 94 113 15 338 107 216 150 364 120 333 - 12 M10x45 218 50 - 192 240 30 30
PB 12 127 147 16 448 147 284 190 480 163 404 158 14,5 M12x70 311 78 - 248 305 36 36
PB 16 164 179 22 556 179 348 265 600 201 560 190 18,5 M16x110 396 99 306 415 40 40
PB 20 201 210 26 662 207 410 315 714 233 663 223 24 M20x130 461 104 - 360 495 46 46
PB 25 247 225 28 772 251 438 375 824 277 787 269 24 M20x160 574 152 - 388 590 86 86
PB 31 302 270 30 928 297 522 425 980 323 887 314 28 M24x180 716 191 315 468 690 98 98
PB 40 374 325 35 968 303 630 450 1220 421 913 363 28 M24x200 906 270 410 576 440 102 117
PB 45 449 395 45 1197 371 774 475 1494 515 962 440 35 M30x160 1115 330 485 712 550 104 119

* Exact values are indicated on the nameplate

14
 900-0121-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

K PB 16 – R1 1 – V 11 – 5 – Z 1 Example
[z] Add. cooling
[0] Without add. cooling
[1] 1 Fan
[3] Cooling coil
[4] 1 Fan + Cooling coil
[8] 2 Cooling coils
[9] 1 Fan + 2 Cooling coils
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
➝

Mounting arrangement
[1] Foot mounted
➝
➝

[R1] Horizontal gear unit

Size
➝

Helical gear unit, EP-Series, [B] 1 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

15
 900-0221-MB 1
Dimensions 3.99

Type PC 14-R1 … PC 31-R1

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

d1, d2 35 45 60...85 > 85

Input shaft Output shaft
Type Weight Oil filling
∅ d2 Tapped centre holes in shaft ends
M 12 M 16 M 20 M24
∅ d1 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [l] DIN 332 Form DS
PC 14 35 k6 218 100 118 - 65 270 135 135 - 105 6
PC 16 35 k6 218 100 118 - 85 290 145 145 - 155 9 Keys to DIN 6885/1 supplied by ELECON
PC 18 45 k6 275 120 155 - 95 350 170 180 - 225 14
Type of protection as per IP 55
PC 20 45 k6 275 120 155 - 120 370 190 180 - 310 19
PC 22 60 m6 337 140 197 195 130 405 190 215 - 420 27
PC 25 60 m6 337 140 197 195 145 450 230 220 296 555 35
PC 28 70 m6 369 140 229 205 160 480 230 250 328 705 46
PC 31 70 m6 369 140 229 205 175 540 290 250 348 995 63

b6 ∅ h Fitting
Type a –0.2 c c6 d H9 e e8 f g –0.2 n n6 o p p2 t t1 t2 u v w1 w2V w2H
∅ s ds x lmax
PC 14 216 113 15 27 16 474 121 216 344 150 500 134 121 333 - 12 M10x45 348 58 125 192 30 22 39 27
PC 16 272 113 15 27 16 579 170 216 400 180 605 183 151 393 - 12 M10x80 453 107 217 192 75 22 49 27
PC 18 293 147 18 32 22 622 155 284 458 190 654 171 155 419 - 14.5 M12x55 486 87 175 248 45 31 56 33
PC 20 347 147 18 32 22 732 211 284 511 225 764 227 190 489 - 14.5 M12x90 596 143 285 248 70 31 56 33
PC 22 376 179 24 41 26 782 193 346 580 235 826 215 190 513 - 18.5 M16x65 622 113 226 306 60 44 62 36
PC 25 434 179 24 41 26 896 249 346 638 265 940 271 220 573 204 18.5 M16x90 736 169 340 306 100 44 67 62
PC 28 464 210 28 48 33 948 230 408 706 280 1000 256 227 610 246 24 M20x80 752 132 265 360 80 49 70 70
PC 31 532 210 28 48 33 1085 299 408 773 315 1137 325 262 680 239 24 M20x110 889 201 402 360 90 49 70 70

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

16
 900-0221-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension or double ext. shaft (900-0200-..)

4) Backstop

K PC 22 – R1 1 – V 11 – 14 – Z 1 Example
[z] Add. cooling
[0] Without add. cooling
[1] 1 Fan
[3] Cooling coil
[4] 1 Fan + Cooling coil
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Foot mounted
[3] Wall mounted
[4] Wall mounted
➝
➝

[R1] Horizontal gear unit

Size
➝

Helical gear unit, EP-Series, [C] 2 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

5) See dimension sheet 900-0220-MB9

17
 900-0221-MB3/ 1
Dimensions 3.99

Type PC 35-R1 … PC 56-R1

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft d1, d2 ≥ 90

Type Weight Oil filling
∅ d1 ∅ d2 Tapped centre holes in shaft ends M 24
m6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [l] DIN 332 Form DS
PC 35 90 446 180 266 255 155 570 290 280 328 1420 55
PC 40 90 446 180 266 255 175 570 290 280 348 1750 75 Keys to DIN 6885/1 supplied by ELECON
PC 42 100 537 215 322 328 195 650 330 320 400 2130 90
Type of protection as per IP 55
PC 45 100 537 215 322 328 210 730 410 320 440 2650 130
PC 47 100 537 215 322 328 230 730 410 320 440 3240 175
PC 50 120 600 215 385 348 250 795 410 385 480 3900 190
PC 53 120 600 215 385 348 250 795 410 385 480 4400 250
PC 56 120 600 215 385 348 270 845 460 385 540 5600 350

∅ Fitting
Type a b6 c c6 e e8 f g h n c n6 o p p2 ∅ s ds x lmax t t1 t2 t3 u v w1 w2v w2H
d H9 –0.2

PC 35 570 225 32 55 40 1275 325 438 925 300 1346 345 255 610 262 24 M20x85 1005 190 325 695 396 190 68 82 87
PC 40 647 225 32 55 40 1430 403 438 1002 375 1501 423 330 760 262 24 M20x120 1157 265 477 847 396 220 68 82 87
PC 42 693 265 40 62 45 1555 392 514 1134 355 1652 422 305 720 303 28 M24x100 1230 225 390 820 460 250 92 90 85
PC 45 759 265 40 62 45 1689 460 514 1200 425 1786 490 375 860 303 28 M24x120 1356 285 516 946 460 250 92 90 90
PC 47 845 265 40 62 52 1860 545 514 1285 500 1957 575 440 1010 303 28 M24x250 1527 370 687 1117 460 250 92 90 100
PC 50 857 320 50 75 60 1892 470 620 1392 425 1962 505 360 860 358 35 M30x120 1524 280 504 1014 560 250 105 105 110
PC 53 928 320 50 75 60 2038 545 620 1463 500 2108 580 435 1010 358 35 M30x180 1670 355 650 1160 560 250 105 105 110
PC 56 1021 320 50 75 60 2231 645 620 1556 600 2301 680 535 1210 365 35 M30x250 1858 450 838 1348 560 250 105 105 110
1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

18
 900-0221-MB4/1
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension or double ext. shaft

4) Backstop

K PC 35 – R1 1 – V 11 – 14 – Z 1 Example

[z] Add. cooling

[0] Without add. cooling
[1] 1 Fan
[3] Cooling coil
[4] 1 Fan + Cooling coil
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
*) [H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement
[0] Shaft mount. with torque arm
[1] Foot mounted
➝
➝

[R1] Horizontal gear unit

Size
➝

Helical gear unit, EP-Series, [C] 2 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

*) Only types PC35 and PC40

19
 900-0321-MB 1
Dimensions 3.99

Type PD 14-R1 … PD 31-R1

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input Shaft Output Shaft Tapped centre holes in shaft ends

Weight Oil filling
Type ∅ d1 ∅ d2 [kg] [l]
DIN 332 Form DS
iN k6
k1 I1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2
d1, d2
PD 14 20...71 65 270 135 135 110 6
25 203 82 121 - - 25...30 35 40...50 65...85 > 85
PD 16 31.5...112 85 290 145 145 160 9
16...45 35 M 10 M 12 M 16 M 20 M 24
PD 18 283 100 183 - 95 350 170 180 - 230 14
50...100 30
Keys to DIN 6885/1 supplied by ELECON
22.4...63 35 120 370 190 180 320 20
PD 20 283 100 183 - -
71...140 30 Type of protection as per IP 55
20...45 50
PD 22 347 120 227 130 130 405 190 215 - 440 27
50...71 40
50
PD 25 25...56 347 120 227 130 145 450 230 220 296 575 35
63...90 40
50
PD 28 16...45 362 120 242 - 160 480 230 250 328 725 47
50...100 40
PD 31 22.4...63 50
362 120 242 - 175 540 290 250 348 1015 64
71...140 40

Type b6 ∅ h
Fitting
a c c6 e e8 f g n n6 o p p2 t t1 t2 u v w1 w2v w2H
-0.2 d H9 -0.2 ∅s ds x lmax
PD 14 285 113 15 27 16 474 121 216 344 150 500 134 121 333 - 12 M10x45 348 58 125 192 25 25 39 27
PD 16 341 113 15 27 16 579 170 216 400 180 605 183 151 393 - 12 M10x80 453 107 217 192 70 25 49 27
PD 18 387 147 18 32 22 622 155 284 458 190 654 171 155 419 - 14.5 M12x55 486 87 175 248 40 59 56 33
PD 20 441 147 18 32 22 732 211 284 511 225 764 227 190 489 - 14.5 M12x90 596 143 285 248 65 59 56 33
PD 22 492 179 24 41 26 782 193 346 580 235 826 215 190 513 - 18.5 M16x65 622 113 226 306 55 74 62 36
PD 25 550 179 24 41 26 896 249 346 638 265 940 271 220 573 204 18.5 M16x90 736 169 340 306 95 74 67 62
PD 28 591 210 28 48 33 948 230 408 706 280 1000 256 227 610 246 24 M20x80 752 132 265 360 65 62 70 70
PD 31 659 210 28 48 33 1085 299 408 773 315 1137 325 262 680 239 24 M20x110 889 201 402 360 75 62 70 70
1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

20
 900-0321-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension or double ext. shaft (900-0200-…)

4) Backstop

K PD 22 – R1 1 – V 11 – 25 – Z 1 Example

[z] Add. cooling

[0] Without add. cooling
[1] 1 Fan
[3] Cooling coil
[4] 1 Fan + Cooling coil
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Foot mounted
[3] Wall mounted
[4] Wall mounted
➝
➝

[R1] Horizontal gear unit

Size
➝

Helical gear unit, EP-Series, [D] 3 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

5) See dimension sheet 900-0220-MB9

21
 900-0321-MB 3/1
Dimensions 3.99

Type PD 35-R1 … PD 67-R1

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather
d1, d2 50 65...80 ≥ 90
Tapped centre holes in shaft ends Keys to DIN 6885/1 supplied by ELECON
M16 M20 M24
DIN 332 Form DS
Type of protection as per IP 55

Input Shaft Output Shaft

Type Weight Oil filling
iN ∅ d1 k1 I1 iN ∅ d1 k1 l1 m1 ∅ x1 ∅ d2 k2 l2 m2 ∅ x2 [kg] [l]
m6 m6 m6
PD 35 16...45 70 435 145 50...100 50 k6 415 125 290 205 155 570 290 280 328 1470 60
PD 40 20...56 70 435 145 63...125 50 k6 415 125 290 205 175 570 290 280 348 1800 80
PD 42 16...45 80 508 170 50...100 65 483 145 338 245 195 650 330 320 400 2200 100
PD 45 20...56 80 508 170 63...125 65 483 145 338 245 210 730 410 320 440 2720 140
PD 47 25...71 80 508 170 80...160 65 483 145 338 245 230 730 410 320 440 3300 190
PD 50 16...100 100 595 215 - - - - 380 290 250 795 410 385 480 4100 200
PD 53 20...125 100 595 215 - - - - 380 290 250 795 410 385 480 4750 260
PD 56 22.4...140 100 595 215 - - - - 380 290 270 845 460 385 540 5800 360
PD 60 16...100 130 715 250 - - - - 465 390 290 920 460 460 540 6800 380
PD 63 18...112 130 715 250 - - - - 465 390 310 970 510 460 580 7800 480
PD 67 20...125 130 715 250 - - - - 465 390 310 970 510 460 580 8900 580

∅ h Fitting
Type a b6 c c6 d H9 e e8 f g -0.2 n n6 o p p2 ∅ s ds x lmax t t1 t2 t3 u v w1 w2v w2H
PD 35 734 225 32 55 40 1275 325 438 925 300 1315 345 255 610 262 24 M20x85 1005 190 325 695 396 190 92 82 87
PD 40 811 225 32 55 40 1430 403 438 1002 375 1470 423 330 760 262 24 M20x120 1157 265 477 847 396 220 92 82 87
PD 42 894 265 40 62 45 1555 392 514 1134 355 1615 422 305 720 303 28 M24x100 1230 225 390 820 460 250 108 90 85
PD 45 960 265 40 62 45 1689 460 514 1200 425 1749 490 375 860 303 28 M24x120 1356 285 516 946 460 250 108 90 90
PD 47 1046 265 40 62 52 1860 545 514 1285 500 1920 575 440 1010 303 28 M24x250 1527 370 687 1117 460 250 108 90 100
PD 50 1104 320 50 75 60 1892 470 620 1392 425 1962 505 360 860 358 35 M30x120 1524 280 504 1014 560 250 100 105 110
PD 53 1175 320 50 75 60 2038 545 620 1463 500 2108 580 435 1010 358 35 M30x180 1670 355 650 1160 560 250 100 105 110
PD 56 1268 320 50 75 60 2231 645 620 1556 600 2301 680 535 1210 365 35 M30x250 1858 450 838 1348 560 250 100 105 110
PD 60 1334 395 60 90 65 2272 565 770 1669 530 2342 600 460 1070 440 42 M36x150 1840 345 630 1200 690 350 120 115 120
PD 63 1407 395 60 90 65 2420 640 770 1742 600 2490 675 530 1210 440 42 M36x200 1988 420 778 1348 690 350 120 115 120
PD 67 1478 395 60 90 70 2566 715 770 1806 670 2636 750 590 1350 440 42 M36x250 2134 495 924 1494 690 350 120 115 120

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

22
 900-0321-MB4/1
Location of input and output shafts (up to size 47) 3.99

Directions of rotation viewing ➪

3) Add. shaft extension or double ext. shaft (900-0200-…)

4) Backstop

K PD 35 – R1 1 – V 11 – 25 – Z 1 Example

[z] Add. cooling

[0] Without add. cooling
[1] 1 Fan
[3] Cooling coil
[4] 1 Fan + Cooling coil
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
*) [H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement
[0] Shaft mount. with torque arm
[1] Foot mounted
➝

[R1] Horizontal gear unit

➝

Size
➝

Helical gear unit, EP-Series, [D] 3 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

*) Only types PD35 and PD 40

23
 900-0321-MB6/1
Location of input and output shafts (from size 50..) 3.99

Directions of rotation viewing ➪

3) Add. shaft extension or double ext. shaft (900-0200-…)

4) Backstop

K PD 50 – R1 1 – V 11 – 25 – Z 1 Example

[z] Add. cooling

[0] Without add. cooling
[1] 1 Fan
[3] Cooling coil
[4] 1 Fan + Cooling coil
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[F] Flange shaft
➝

Mounting arrangement
[0] Shaft mount. with torque arm
[1] Foot mounted
➝

[R1] Horizontal gear unit

➝

Size
➝

Helical gear unit, EP-Series, [D] 3 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

24
NOTES

25
 900-0421-MB 1
Dimensions 3.99

Type PE 18-R1 … PE 31-R1

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input Shaft Output Shaft

Weight Oil filling Tapped centre holes in shaft ends
Type ∅ d2
iN ∅ d1 k1 I1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [l] DIN 332 Form DS
k6
d1, d2
PE 18 90... 315 25 227 72 155 - 95 350 170 180 235 15
- 25...30 35 > 85
PE 20 125...450 25 227 72 155 - 120 370 190 180 325 20
71... 200 35 M 10 M 12 M 24
PE 22 307 100 207 - 130 405 190 215 - 445 28
224...450 30
Keys to DIN 6885/1 supplied by ELECON
90... 250 35 307 100 207 - 145 220 296
PE 25 450 230 580 36
280...560 30 Type of protection as per IP 55
PE 28 71... 450 35 319 100 219 - 160 480 230 250 328 740 48
PE 31 100...630 35 319 100 219 - 175 540 290 250 348 1035 66

b6 ∅ h Fitting
Type a -0.2
c c6 d H9 e e8 f g -0.2 n n6 o p p2 ∅ s ds x lmax t t1 t2 u v w1 w2v w2H
PE 18 387 147 18 32 22 622 155 284 458 190 654 171 155 419 - 14.5 M12x55 486 87 175 248 30 31 56 33
PE 20 441 147 18 32 22 732 211 284 511 225 764 227 190 489 - 14.5 M12X90 596 143 285 248 55 31 56 33
PE 22 492 179 24 41 26 782 193 346 580 235 826 215 190 513 - 18.5 M16X65 622 113 226 306 45 54 62 36
PE 25 550 179 24 41 26 896 249 346 638 265 940 271 220 573 204 18.5 M16X90 736 169 340 306 85 54 67 62
PE 28 591 210 28 48 33 948 230 408 706 280 1000 256 227 610 246 24 M20X80 752 132 265 360 50 39 70 70
PE 31 659 210 28 48 33 1085 299 408 773 315 1137 325 262 680 239 24 M20X110 889 201 402 360 60 39 70 70

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

30
26
 900-0421-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension or double ext. shaft (900-0200-…)

4) Backstop

K PE 22 – R1 3 – V 11 – 250 – Z 3 Example
[z] Add. cooling
[0] Without add. cooling
[3] Cooling coil
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Foot mounted
[3] Wall mounted
[4] Wall mounted
➝
➝

[R1] Horizontal gear unit

Size
➝

Helical gear unit, EP-Series, [E] 4 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

5) See dimension sheet 900-0220-MB9

31
27
 900-0421-MB 3/1
Dimensions 3.99

Type PE 35-R1 … PE 67-R1

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

d1, d2 40...50 70 ≥ 155

Keys to DIN 6885/1 supplied by ELECON
Tapped centre holes in shaft ends M16 M20 M24
DIN 332 Form DS
Type of protection as per IP 55

Input Shaft Output Shaft

Weight Oil filling
Type ∅ d1 ∅ d1 ∅ d2 [kg] [l]
iN k6 k1 I1 iN k6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2
PE 35 71...200 50 380 120 224...450 40 380 120 260 -- 155 570 290 280 328 1490 65
PE 40 100...280 50 380 120 315...630 40 380 120 260 - 175 570 290 280 348 1820 85
PE 42 71...450 45 412 107 -- -- -- -- 305 -- 195 650 330 320 400 2200 110
PE 45 90...560 45 412 107 -- -- -- -- 305 -- 210 730 410 320 440 2750 150
PE 47 112...710 45 412 107 -- -- -- -- 305 -- 230 730 410 320 440 3300 200
PE 50 71...450 70 m6 510 145 -- -- -- -- 365 -- 250 795 410 385 480 4100 200
PE 53 90...560 70 m6 510 145 -- -- -- -- 365 -- 250 795 410 385 480 4750 260
PE 56 100...630 70 m6 510 145 -- -- -- -- 365 -- 270 845 460 385 540 5800 370
PE 60 71...450 80 m6 610 170 -- -- -- -- 440 -- 290 920 460 460 540 6800 390
PE 63 80...500 80 m6 610 170 -- -- -- -- 440 -- 310 970 510 460 580 7800 480
PE 67 100...630 80 m6 610 170 -- -- -- -- 440 -- 310 970 510 460 580 8900 580

∅ h Fitting
Type a b6 c c6 d H9 e e8 f g n n6 o p p2 t t1 t2 t3 u v w1 w2v w2H
-0.2 ∅ s ds x lmax
PE 35 734 225 32 55 40 1275 325 438 925 300 1315 345 255 610 262 24 M20x85 1005 190 325 695 396 190 62 82 87
PE 40 811 225 32 55 40 1430 403 438 1002 375 1470 423 330 760 262 24 M20x120 1157 265 477 847 396 220 62 82 87
PE 42 894 265 40 62 45 1555 392 514 1134 355 1615 422 305 720 303 28 M24x100 1230 225 390 820 460 250 42 90 85
PE 45 960 265 40 62 45 1689 460 514 1200 425 1749 490 375 860 303 28 M24x120 1356 285 516 946 460 250 42 90 90
PE 47 1046 265 40 62 52 1860 545 514 1285 500 1920 575 440 1010 303 28 M24x250 1527 370 687 1117 460 250 42 90 100
PE 50 1104 320 50 75 60 1892 470 620 1392 425 1962 505 360 860 358 35 M30x120 1524 280 504 1014 560 250 85 105 110
PE 53 1175 320 50 75 60 2038 545 620 1463 500 2108 580 435 1010 358 35 M30x180 1670 355 650 1160 560 250 85 105 110
PE 56 1268 320 50 75 60 2231 645 620 1556 600 2301 680 535 1210 365 35 M30x250 1858 450 838 1348 560 250 85 105 110
PE 60 1334 395 60 90 65 2272 565 770 1669 530 2342 600 460 1070 440 42 M36x150 1840 345 630 1200 690 350 95 115 120
PE 63 1407 395 60 90 65 2420 640 770 1742 600 2490 675 530 1210 440 42 M36x200 1988 420 778 1348 690 350 95 115 120
PE 67 1478 395 60 90 70 2566 715 770 1806 670 2636 750 590 1350 440 42 M36x250 2134 495 924 1494 690 350 95 115 120

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

26
28
 900-0421-MB4/1
Location of input and output shafts (upto size 47) 3.99

Directions of rotation viewing ➪

3) Add. shaft extension or double ext. shaft (900-0200-…)

4) Backstop

K PE 35 – R1 1 – V 11 – 250 – Z 3 Example

[z] Add. cooling

[0] Without add. cooling
[3] Cooling coil
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
*) [H] Hollow shaft with key-way
[G] Hollow shaft with shrink disc
[F] Flange shaft
➝

Mounting arrangement
[0] Shaft mount. with torque arm
[1] Foot mounted
➝

[R1] Horizontal gear unit

➝

Size
➝

Helical gear unit, EP-Series, [E] 4 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate
*) Only types PE35 and PE 40

27
29
 900-0421-MB6/1
Location of input and output shafts (from size 50) 3.99

Directions of rotation viewing ➪

3) Add. shaft extension or double ext. shaft (900-0200-…)

4) Backstop

K PE 50 – R1 1 – V 11 – 250 – Z 3 Example

[z] Add. cooling

[0] Without add. cooling
[3] Cooling coil
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[F] Flange shaft
➝

Mounting arrangement
[0] Shaft mount. with torque arm
[1] Foot mounted
➝
➝

[R1] Horizontal gear unit

Size
➝

Helical gear Unit, EP-Series, [E] 4 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

28
30
NOTES

31
 900-0225-MB 1
Dimensions 3.99

Type PC 14-S5 … PC 31-S5

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

d1, d2 35 45 60...85 > 85

Input shaft Output shaft
Type Weight Oil filling
∅ d2 Tapped centre holes in shaft ends
M 12 M 16 M 20 M24
∅ d1 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [l] DIN 332 Form DS

PC 14 35 k6 218 100 118 - 65 270 135 135 - 105 10

PC 16 35 k6 218 100 118 - 85 290 145 145 - 155 16 Keys to DIN 6885/1 supplied by ELECON
PC 18 45 k6 275 120 155 - 95 350 170 180 - 225 25
Type of protection as per IP 55
PC 20 45 k6 275 120 155 - 120 370 190 180 - 310 33
PC 22 60 m6 337 140 197 195 130 405 190 215 - 420 45
PC 25 60 m6 337 140 197 195 145 450 230 220 296 555 60
PC 28 70 m6 369 140 229 205 160 480 230 250 328 705 75
PC 31 70 m6 369 140 229 205 175 540 290 250 348 995 108

b6 ∅ h h2 Fitting
Type –0.2 c6 c7 e7 f7 g –0.2 h1 –0.2 h7 n2 o p2 p7 t7 u7 w1s w2SV w2SH
d H9 ∅ s7 ds x lmax
PC 14 113 27 51 16 274 216 344 150 350 134 195 500 121 - 535 14.5 M12x90 206 194 21 38 26
PC 16 113 27 51 16 334 216 400 180 455 183 225 605 151 - 640 14.5 M12x90 266 194 21 48 26
PC 18 147 32 62 22 348 284 458 190 464 171 245 654 155 - 690 16.5 M14x100 260 258 26 51 28
PC 20 147 32 62 22 414 284 511 225 574 227 280 764 190 - 795 16.5 M14x100 330 258 26 51 28
PC 22 179 41 76 26 426 346 580 235 591 215 305 826 190 - 865 24 M20x130 326 312 41 59 33
PC 25 179 41 77 26 486 346 638 265 705 271 335 940 220 204 980 24 M20x130 384 312 41 64 59
PC 28 210 48 86 33 504 408 706 280 720 256 360 1000 227 246 1030 28 M24x150 386 366 46 67 67
PC 31 210 48 95 33 574 408 773 315 857 325 395 1137 262 239 1165 28 M24x160 456 366 46 67 67

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

32
 900-0225-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension or double ext. shaft (900-0200-…)

4) Backstop

K PC 22 – S5 4 – V 11 – 14 – Z 1 Example

[z] Add. cooling

[0] Without add. cooling
[1] Fan
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
➝

[F] Flange shaft

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Wall mounted
[3] Wall mounted
[4] Wall mounted
[5] Foot mounted
➝
➝

[S5] Vertical mounting gear unit with horinzontal parallel shafts, high speed shaft upward
Size
➝

Helical gear unit, EP-Series, [C] 2 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

5) See dimension sheet 900-0220-MB9

33
 900-0325-MB 1
Dimensions 3.99

Type PD 14-S5 … PD 31-S5

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Weight Oil filling
Type ∅ d1 ∅ d2 DIN 332 Form DS
iN k6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [I]
d1, d2
PD 14 20...71 65 270 135 135 110 12 25...30 35 40...50 65...85 > 85
25 203 82 121 - -
PD 16 31.5...112 85 290 145 145 160 19
M 10 M 12 M 16 M 20 M 24
16...45 35 95 350 170 180 230 30
PD 18 283 100 183 - -
50...100 30 Keys to DIN 6885/1 supplied by ELECON
22.4...63 35
PD 20 283 100 183 - 120 370 190 180 - 320 40
71...140 30 Type of protection as per IP 55
20...45 50
PD 22 50...71 347 120 227 130 130 405 190 215 - 440 55
40
25...56 50 347 120
PD 25 227 130 145 450 230 220 296 575 74
63...90 40
16...45 50
PD 28 362 120 242 - 160 480 230 250 328 725 92
50...100 40
22.4...63 50
PD 31 362 120 242 - 175 540 290 250 348 1015 130
71...140 40

∅ Fitting
Type b6 c6 c7 e7 f7 g h h1 h2 h7 n2 o p2 p7 t7 u7 w1s w2SV w2SH
-0.2 dH9 -0.2 -0.2 ∅ s7 ds x lmax
PD 14 113 27 51 16 274 216 344 150 419 134 195 500 121 - 535 14.5 M12x90 206 194 24 38 26
PD 16 113 27 51 16 334 216 400 180 524 183 225 605 151 - 640 14.5 M12x90 266 194 24 48 26
PD 18 147 32 62 22 348 284 458 190 558 171 245 654 155 - 690 16.5 M14x100 260 258 54 51 28
PD 20 147 32 62 22 414 284 511 225 668 227 280 764 190 - 795 16.5 M14x100 330 258 54 51 28
PD 22 179 41 76 26 426 346 580 235 707 215 305 826 190 - 865 24 M20x130 326 312 71 59 33
PD 25 179 41 77 26 486 346 638 265 821 271 335 940 220 204 980 24 M20x130 384 312 71 64 59
PD 28 210 48 86 33 504 408 706 280 847 256 360 1000 227 246 1030 28 M24x150 386 366 59 67 67
PD 31 210 48 95 33 574 408 773 315 984 325 395 1137 262 239 1165 28 M24x160 456 366 59 67 67

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

34
 900-0325-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension or double ext. shaft (900-0200-…)

4) Backstop

K PD 22 – S5 3 – V 11 – 25 – Z 1 Example

[z] Add. cooling

[0] Without add. cooling
[1] Fan
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
➝

[F] Flange shaft

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Wall mounted
[3] Wall mounted
[4] Wall mounted
[5] Foot mounted
➝
➝

[S5]Vertical mounting gear unit with horizontal parallel shafts, high speed shaft upward
Size
➝

Helical gear unit, EP-Series, [D] 3 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

5) See dimension sheet 900-0220-MB9

35
 900-0425-MB 1
Dimensions 3.99

Type PE 18-S5 … PE 31-S5

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Type Weight Oil filling DIN 332 Form DS
∅ d1 ∅ d2 [kg] [l]
iN k6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 d1, d2
PE 18 90...315 25 227 72 155 - 95 350 170 180 - 235 31 25...30 35 > 85
PE 20 125...450 25 227 72 155 - 120 370 190 180 - 325 41 M 10 M 12 M 24
71...200 35
PE 22 224...450 30 307 100 207 - 130 405 190 215 - 445 57
90...250 35 Keys to DIN 6885/1 supplied by ELECON
PE 25 307 100 207 - 145 450 230 220 296 580 74
280...560 30
PE 28 71...450 35 319 100 219 - 160 480 230 250 328 740 96 Type of protection as per IP 55
PE 31 100...630 35 319 100 219 - 175 540 290 250 348 1035 134

∅ Fitting
Type b6 h h2
c6 c7 d H9 e7 f7 g h1 h7 n2 o p2 p7 t7 u7 w1s w2sv w2SH
-0.2 -0.2 -0.2 ∅ s7 ds x lmax

PE 18 147 32 62 22 348 284 458 190 558 171 245 654 155 - 690 16.5 M14x100 260 258 26 51 28
PE 20 147 32 62 22 414 284 511 225 668 227 280 764 190 - 795 16.5 M14x100 330 258 26 51 28
PE 22 179 41 76 26 426 346 580 235 707 215 305 826 190 - 865 24 M20x130 326 312 51 59 33
PE 25 179 41 77 26 486 346 638 265 821 271 335 940 220 204 980 24 M20x130 384 312 51 64 59
PE 28 210 48 86 33 504 408 706 280 847 256 360 1000 227 246 1030 28 M24x150 386 366 36 67 67
PE 31 210 48 95 33 574 408 773 315 984 325 395 1137 262 239 1165 28 M24x160 456 366 36 67 67

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

36
 900-0425-MB 2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension or double ext. shaft (900-0200-…)

4) Backstop

K PE 22 – S5 1 – V 11 – 250 – Z 0 Example

[z] Add. cooling

[0] Without add. cooling
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
➝

[F] Flange shaft

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Wall mounted
[3] Wall mounted
[4] Wall mounted
[5] Foot mounted
➝
➝

[S5]Vertical mounting gear unit with horinzontal parallel shafts, high speed shaft upward
Size
➝

Helical gear unit, EP-Series, [E] 4 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

5) See dimension sheet 900-0220-MB9

37
 900-0226-MB 1
Dimensions 3.99

Type PC 14-T6 … PC 31-T6

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Output shaft d1, d2 35 45 60...85 > 85

Input shaft
Type Weight Oil filling
∅ d2 Tapped centre holes in shaft ends M 12 M 16 M 20 M24
∅ d1 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [l]
DIN 332 Form DS
PC 14 35 k6 218 100 118 - 65 270 135 135 - 105 10
PC 16 35 k6 218 100 118 - 85 290 145 145 - 155 15 Keys to DIN 6885/1 supplied by ELECON
PC 18 45 k6 275 120 155 - 95 350 170 180 - 225 25
Type of protection as per IP 55
PC 20 45 k6 275 120 155 - 120 370 190 180 - 310 31
PC 22 60 m6 337 140 197 195 130 405 190 215 - 420 47
PC 25 60 m6 337 140 197 195 145 450 230 220 296 555 58
PC 28 70 m6 369 140 229 205 160 480 230 250 328 705 80
PC 31 70 m6 369 140 229 205 175 540 290 250 348 995 125

b6 ∅ h h1 Fitting
Type –0.2 c6 c8 e7 f7 g –0.2 –0.2 h2 h7 h8 n2 o p2 p7 t7 u7 w1s w2SV w2SH
dH9 ∅ s8 dsxlmax
PC 14 113 27 57 16 274 216 344 150 150 366 195 183 500 121 - 535 14.5 M12x90 206 194 21 38 26
PC 16 113 27 57 16 334 216 400 180 150 422 225 213 605 151 - 640 14.5 M12x90 266 194 21 48 26
PC 18 147 32 64 22 348 284 458 190 190 483 245 229 654 155 - 690 16.5 M14x100 260 258 26 51 28
PC 20 147 32 64 22 414 284 511 225 190 537 280 264 764 190 - 795 16.5 M14x100 330 258 26 51 28
PC 22 179 41 76 26 426 346 580 235 235 611 305 278 826 190 - 865 24 M20x130 326 312 41 59 33
PC 25 179 41 77 26 486 346 638 265 235 669 335 308 940 220 204 980 24 M20x130 384 312 41 64 59
PC 28 210 48 92 33 504 408 706 280 280 744 360 330 1000 227 246 1030 28 M24x150 386 366 46 67 67
PC 31 210 48 95 33 574 408 773 315 280 812 395 365 1137 262 239 1165 28 M24x160 456 366 46 67 67

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

38
 900-0226-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension or double ext. shaft (900-0200-…)

4) Backstop

K PC 22 – T6 6 – V 11 – 11.2 – Z 1 Example

[z] Add. cooling

[0] Without add. cooling
[1] Fan
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Wall mounted
[3] Wall mounted
[4] Wall mounted
[6] Foot mounted
➝
➝

[T6] Vertical mounting gear unit with horinzontal parallel shafts, high speed shaft downward
Size
➝

Helical gear unit, EP-Series, [C] 2 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

5) See dimension sheet 900-0220-MB9

39
 900-0326-MB 1
Dimensions 3.99

Type PD 14-T6 … PD 31-T6

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Weight Oil filling DIN 332 Form DS
Type ∅ d1 ∅ d2
iN k6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [l]
d1, d2
PD 14 20...71 65 270 135 135 110 9
25 203 82 121 - - 25...30 35 40...50 65...85 > 85
PD 16 31.5...112 85 290 145 145 160 14
M 10 M 12 M 16 M 20 M 24
16...45 35
PD 18 283 100 183 - 95 350 170 180 - 230 24
50...100 30 Keys to DIN 6885/1 supplied by ELECON
22.4...63 35
PD 20 283 100 183 - 120 370 190 180 - 320 30
71...140 30 Type of protection as per IP 55
20...45 50
PD 22 347 120 227 130 130 405 190 215 - 440 46
50...71 40
25...56 50
PD 25 347 120 227 130 145 450 230 220 296 575 56
63...90 40
16...45 50
PD 28 362 120 242 - 160 480 230 250 328 725 77
50...100 40
22.4...63 50
PD 31 362 120 242 - 175 540 290 250 348 1015 100
71...140 40

∅ h h1 Fitting
Type b6 c6 c8 e7 f7 g h2 h7 h8 n2 o p2 p7 t7 u7 w1s w2SV w2SH
-0.2 d H9 -0.2 -0.2 ∅ s8 ds x lmax
PD 14 113 27 57 16 274 216 344 150 81 366 195 183 500 121 - 535 14.5 M12x90 206 194 24 38 26
PD 16 113 27 57 16 334 216 400 180 81 422 225 213 605 151 - 640 14.5 M12x90 266 194 24 48 26
PD 18 147 32 64 22 348 284 458 190 96 483 245 229 654 155 - 690 16.5 M14x100 260 258 54 51 28
PD 20 147 32 64 22 414 284 511 225 96 537 280 264 764 190 - 795 16.5 M14x100 330 258 54 51 28
PD 22 179 41 76 26 426 346 580 235 119 611 305 278 826 190 - 865 24 M20x130 326 312 71 59 33
PD 25 179 41 77 26 486 346 638 265 119 669 335 308 940 220 204 980 24 M20x130 384 312 71 64 59
PD 28 210 48 92 33 504 408 706 280 153 744 360 330 1000 227 246 1030 28 M24x150 386 366 59 67 67
PD 31 210 48 94 33 574 408 773 315 153 812 395 365 1137 262 239 1165 28 M24x160 456 366 59 67 67

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

40
 900-0326-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension or double ext. shaft (900-0200-…)

4) Backstop

K PD 22 – T6 6 – V 11 – 25 – Z 1 Example

[z] Add. cooling

[0] Without add. cooling
[1] 1 Fan
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Wall mounted
[3] Wall mounted
[4] Wall mounted
[6] Foot mounted
➝
➝

[T6] Vertical mounting gear unit with horinzontal parallel shafts, high speed shaft downward
Size
➝

Helical gear unit, EP-Series, [D] 3 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

5) See dimension sheet 900-0220-MB9

41
 900-0426-MB 1
Dimensions 3.99

Type PE 18-T6 … PE 31-T6

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Weight Oil filling DIN 332 Form DS
Type ∅ d1 ∅ d2
iN k6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [l]
d1, d2
PE 18 90...315 25 227 72 155 - 95 350 170 180 - 235 23 25...30 35 > 85
PE 20 125...450 25 227 72 155 - 120 370 190 180 - 325 30 M 10 M 12 M 24
71...200 35
PE 22 307 100 207 - 130 405 190 215 - 445 45
224...450 30
90...250 35 Keys to DIN 6885/1 supplied by ELECON
PE 25 307 100 207 - 145 450 230 220 296 580 55
280...560 30
PE 28 71...450 35 319 100 219 - 160 480 230 250 328 740 76 Type of protection as per IP 55
PE 31 100...630 35 319 100 219 - 175 540 290 250 348 1035 100

∅ e7 Fitting
Type b6 c6 c8 f7 g h h1 h2 h7 h8 n2 o p2 p7 t7 u7 w1s w2SV w2SH
-0.2 d H9 -0.2 -0.2 ∅ s8 dS x lmax
PE 18 147 32 64 22 348 284 458 190 96 483 245 229 654 155 - 690 16.5 M14x100 260 258 26 51 28
PE 20 147 32 64 22 414 284 511 225 96 537 280 264 764 190 - 795 16.5 M14x100 330 258 26 51 28
PE 22 179 41 76 26 426 346 580 235 119 611 305 278 826 190 - 865 24 M20x130 326 312 51 59 33
PE 25 179 41 77 26 486 346 638 265 119 669 335 308 940 220 204 980 24 M20x130 384 312 51 64 59
PE 28 210 48 92 33 504 408 706 280 153 744 360 330 1000 227 246 1030 28 M24x150 386 366 36 67 67
PE 31 210 48 94 33 574 408 773 315 153 812 395 365 1137 262 239 1165 28 M24x160 456 366 36 67 67

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

42
 900-0426-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension or double ext. shaft (900-0200-…)

4) Backstop

K PE 22 – T6 6 – V 11 – 250 – Z 0 Example

[z] Add. cooling

[0] Without add. cooling
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Wall mounted
[3] Wall mounted
[4] Wall mounted
[6] Foot mounted
➝
➝

[T6] Vertical mounting gear unit with horinzontal parallel shafts, high speed shaft downward
Size
➝

Helical gear unit, EP-Series, [E] 4 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

5) See dimension sheet 900-0220-MB9

43
Power ratings

Bevel Helical Units, two-stage

Type Gearbox Size
PLB 10 12 16 20 25 31 40 45
n1 n2
iN Nominal Power P [kW]
N
[min-1]
1500 270 30 80 160 314 555 956 1806 3169
5.6 1000 160 20 53 107 209 370 638 1204 2113
1500 240 27 67 138 274 471 835 1566 2817
6.3 1000 160 18 45 92 183 314 557 1044 1878
1500 211 21 55 110 221 403 726 1389 2256
7.1 1000 141 14 36 73 147 268 484 926 1504
1500 188 21 56 112 220 389 670 1264 2219
8 1000 125 14 37 75 147 259 446 843 1479
1500 167 19 47 97 192 330 585 1096 1972
9 1000 111 12 31 65 128 220 390 731 1315
1500 150 15 39 78 157 286 515 986 1602
10 1000 100 10 26 52 105 191 343 658 1068
1500 134 15 40 80 157 278 478 903 1585
11.2 1000 89 10 27 53 105 185 319 602 1056
1500 120 13 34 70 138 237 421 789 1420
12.5 1000 80 9 22 46 92 158 281 526 947
1500 107 10 28 56 112 204 368 705 1144
14 1000 71 7 18 37 75 136 245 470 763
1500 94 11 27 56 107 194 335 632 1109
16 1000 63 7 18 37 71 130 223 421 740
1500 83 9,3 23 48 96 165 292 548 986
18 1000 56 6,2 16 32 64 110 195 365 657
1500 75 7,3 19 39 79 143 258 493 801
20 1000 50 4,9 13 26 52 95 172 329 534
1500 67 6,9 18 37 70 128 220 423 743
22.4 1000 44,5 4,6 12 25 47 85 147 282 496

Nominal Output Torques

Bevel Helical Gear Units, two-stage
Type Gearbox Size

PLB 10 12 16 20 25 31 40 45
iN Nominal Output Torques T [kNm]
2N

5.6 2.58 5.72 11.2 19.8 34.1 64.4

1.07 113
6.3 2.68 5.55 11 18.9 33.5
62.8
7.1 0.93 2.47 4.96 10 18.2 32.8 102
8 2.85 5.72 11.2 19.8 34.1 64.4
1.07 113
9 2.68 5.55 11 18.9 33.5
62.8
10 0.93 2.47 4.96 10 18.2 32.8 102
11.2 2.85 5.72 11.2 19.8 34.1 64.4
1.07 113
12.5 2.68 5.55 11 18.9 33.5
62.8
14 0.93 2.47 4.96 10 18.2 32.8 102
16 2.80 5.72 10.9 19.8 34.1 64.4
1.07 113
18 2.68 5.55 11 18.9 33.5
62.8
20 0.93 2.47 4.96 32.8 102
10 18.2
22.4 0.99 2.52 5.26 31.4 60.3 106

44
Power ratings
Type Gearbox Size
PLC 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
n1 n2 Nominal Power
iN P [KW]
N
[min-1]
1500 83 28 77 147 296 517 917 1690 3000
18 1000 56 19 51 98 197 345 611 1130 2000
1500 75 26 66 132 266 475 825 1520 2700 3270
20 1000 50 17 44 88 177 317 550 1015 1800 2180
1500 67 22 57 116 173 225 400 554 730 919 1360 1680 2410 2920 3390
22.4 1000 44.5 14 38 77 115 150 266 369 487 613 906 1120 1605 1945 2260
1500 60 20 56 74 106 146 213 296 372 497 660 839 1220 1500 1865 2160 2515 3035
Bevel Helical Gear Units, three-stage

25 1000 40 13 37 49 71 97 142 197 248 331 440 559 812 1000 1245 1440 1675 2025
1500 54 18 30 47 66 94 129 190 264 339 430 589 721 904 1090 1315 1665 1930 2335 2580
28 1000 35.5 12 20 31 44 63 80 127 176 226 279 393 481 603 725 880 1110 1285 1555 1720
1500 47.5 15 27 40 59 82 123 160 218 283 394 519 653 819 966 1200 1425 1710 2075 2410
31.5 1000 31.5 10 18 27 39 54 82 107 145 188 263 346 435 546 644 795 949 1140 1385 1605
1500 42.5 14 23 39 52 74 103 150 208 262 350 465 591 706 858 1060 1315 1520 1770 2140
35.5 1000 28 9.3 15 26 35 49 69 100 139 175 233 310 394 471 572 705 875 1010 1180 1425
1500 37.5 13 21 33 46 66 89 133 185 237 300 413 505 633 761 920 1165 1350 1635 1805
40 1000 25 8.7 14 22 31 44 60 89 123 158 200 275 337 422 507 614 777 900 1090 1205
1500 33.5 11 19 29 41 58 86 112 152 200 276 363 457 574 677 835 997 1200 1450 1690
45 1000 22.2 7.2 13 19 27 38 57 75 101 133 184 242 305 383 451 557 665 800 968 1125
1500 30 10 16 28 37 53 73 106 148 186 248 330 420 502 609 751 932 1080 1260 1520
50 1000 20 6.7 11 19 25 35 49 71 99 124 165 220 280 335 406 500 621 720 838 1010
1500 27 9.1 15 23 33 47 64 95 132 169 215 295 361 452 544 658 833 963 1170 1290
56 1000 17.9 6.1 10 15 22 31 43 63 88 113 142 197 241 300 363 439 555 642 778 860
1500 23.8 7.7 13 20 29 41 61 80 109 142 197 259 327 410 483 570 712 856 1040 1205
63 1000 16 5.2 8.7 14 20 28 41 53 73 95 131 173 218 273 322 397 475 571 691 805
1500 21 7.0 11 18 26 37 51 71 104 126 175 222 295 353 429 529 657 754 885 1070
71 1000 14 4.7 7.5 12 17 25 34 47 69 84 117 148 197 235 286 353 438 503 590 713
1500 18.8 11 23 45 92 150 252 317 461 583 778 903
80 1000 12.5 7.3 15 30 61 100 168 211 307 389 519 602
1500 16.7 9.4 21 40 76 133 220 287 405 498 804
90 1000 11.1 6.3 14 27 51 89 145 191 270 332 535
1500 15 8.0 18 67 251 444
100 1000 10 5.3 12 45 167 296
1500 13.4 7.2 218
112 1000 8.9 4.8 144

PLD 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
1500 21 7.2
71 1000 14 4.8
1500 18.8 6.4 17 33 67 116 206 381 674
80 1000 12.5 4.3 11 22 45 77 137 254 450
1500 16.7 5.4 15 29 59 105 183 338 600 726
90 1000 11.1 3.6 10 19 39 70 122 225 400 484
1500 15 5.1 12.9 26 39 50 90 124 163 206 304 376 539 653 760
100 1000 10 3.4 8.6 17,3 26 33 60 83 109 137 203 251 360 435 506
1500 13.4 4.6 7.6 12 17 24 33 48 66 83 111 147 187 272 335 416 482 561 677
112 1000 8.9 3.1 5.1 8.0 11 16 22 32 44 55 74 98 125 181 223 277 321 374 451
Bevel Helical Gear Units, four-stage

1500 12 3.9 6.8 11 15 21 29 43 59 76 96 132 162 203 244 295 373 432 523 578
125 1000 8 2.5 4.5 7.3 10 14 19 29 39 51 64 88 108 135 163 197 249 288 349 385
1500 10.7 3.7 5.7 9.5 13.2 18.5 28 36 49 64 89 117 147 184 217 267 320 385 467 542
140 1000 7.1 2.5 3.8 6.1 8.8 12.3 19 24 33 42 59 78 98 123 145 179 213 257 311 361
1500 9.4 3.2 5.3 8.7 12 17 23 33 46 58 78 103 131 157 190 235 291 337 393 474
160 1000 6.3 2.1 3.5 5.8 8.0 11 15 22 31 39 52 69 87 105 127 157 194 225 262 316
1500 8.33 2.7 4.7 7.3 10 15 19 30 41 53 66 92 112 141 169 205 259 300 363 401
180 1000 5.55 1.8 3.1 4.9 6.7 10 13 20 27 35 44 61 75 94 113 137 173 200 242 267
1500 7.5 2.6 4.0 6.4 9.3 13 20 25 34 45 62 82 103 129 152 188 224 270 327 380
200 1000 5 1.7 2.7 4.3 6.2 8.6 13 17 23 30 41 55 69 86 101 125 149 180 218 253
1500 6.7 2.3 3.8 6.2 8.3 12 16 24 33 42 55 74 94 112 136 167 208 241 281 340
224 1000 4.46 1.5 2.5 4.1 5.5 8.0 11 16 22 28 37 49 63 75 91 112 139 161 187 226
1500 6 1.9 3.4 5.3 7.4 11 14 21 30 38 48 66 81 101 122 147 186 216 261 290
250 1000 4 1.3 2.3 3.5 4.9 7.3 9.5 14 20 25 32 44 54 67 81 98 124 144 174 193
1500 5.36 1.8 2.9 4.6 6.6 9.2 14 18 25 32 44 58 74 92 109 134 160 193 233 271
280 1000 3.57 1.2 1.9 3.0 4.4 6.1 9.3 12 17 21 29 39 49 61 73 89 107 129 155 181
1500 4.76 2.7 4.1 5.9 8.2 12 16 23 28 39 50 67 80 97 119 148 171 200 241
315 1000 3.17 1.8 2.7 3.9 5.5 8.0 11 15 19 26 33 45 53 65 79 99 114 133 161
1500 4.22 2.4 5.2 10 21 34 57 71 104 131 177 204
355 1000 2.82 1.6 3.5 6.7 14 22 38 47 69 87 118 136
1500 3.75 2.0 4.6 9.0 17 30 50 65 91 112 181
400 1000 2.5 1.3 3.1 6.0 11 20 33 43 61 75 120
1500 3.35 1.8 4.1 15 56 99
450 1000 2.22 1.2 2.7 10 37 66
1500 3 49
500 1000 2 32

45
Thermal capacities
Type PLB.. -R1
Average air n1 Gearbox Size
speed (min-1) 10 12 16 20 25 31 40 45
Pto [kW] / without add. cooling
Vw = 0.5 m/s 1) - 15 26 42 60 94 127 175 237
Vw = 1.2 m/s 2) - 22 37 61 85 134 182 250 338
Vw = 4.0 m/s 3) - 28 48 79 111 174 236 325 439
Pt1 [kW] / with fan
- 1500 37 71 118 166 260 353 485
On Request
- 1000 27 53 88 123 193 263 361
Pt3 [kW] / with cooling coil
Vw = 0.5 m/s 1) - - 59 168 230 421 566 884 946
Vw = 1.2 m/s 2) - - 70 187 256 461 620 959 1047
Vw = 4.0 m/s 3) - - 81 205 282 501 675 1034 1148
Pt4 [kW] / with fan and cooling coil
- 1500 - 104 244 336 588 792 1194
On request
- 1000 - 86 214 294 521 702 1070
Vw = 0.5 m/s 9 11.2
Values of Pt0 - and Pt3 meant for gearbox sizes 40 & 45 are applicable from ratios as indicated.
Vw = 1.2 m/s 6.3 8
Vw = 4.0 m/s 5.6 5.6

Type PLC.. -R1

Average air n1 Gearbox Size

speed (min-1) 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
Pto [kW] / without add. cooling
Vw = 0.5 m/s 1) - 15 20 25 32 39 47 55 66 95 109 123 148 180 180 212 259 268 306 346
Vw = 1.2 m/s 2) - 21 28 35 44 54 65 77 92 132 151 171 206 250 250 295 360 372 425 480
Vw = 4.0 m/s 3) - 27 35 45 56 69 83 99 118 169 193 219 264 320 320 378 461 476 544 614
Pt1 [kW] / with fan
- 1500 41 54 68 86 105 126 149 179 257 294 333 401 485 485 574 700
On request
- 1000 30 40 51 64 78 94 111 133 191 218 247 298 360 360 425 520
Pt3 [kW] / with cooling coil
Vw = 0.5 m/s 1) - 43 82 57 116 123 207 174 288 278 500 415 539 571 669 845 892 901 939 979
Vw = 1.2 m/s 2) - 49 89 67 128 138 225 195 314 315 542 463 597 641 739 928 993 1005 1058 1113
Vw = 4.0 m/s 3) - 55 97 76 141 153 243 216 340 352 584 511 655 711 809 1011 1094 1109 1177 1247
Pt4 [kW] / with fan and cooling coil
- 1500 69 116 100 170 189 266 267 401 440 686 626 793 877 974 1207 1333
On request
- 1000 58 102 83 148 162 254 229 355 374 610 540 690 752 849 1058 1153
Vw = 0.5 m/s 22.4 22.4 28 28 28 31.5 31.5 31.5 35.5 35.5 35.5
Values of Pt0 - and Pt3 meant for gearbox sizes 35 - 67 are
Vw = 1.2 m/s applicable from ratios as indicated. 18 22.4 18 22.4 28 22.4 22.4 25 25 25 25

Type PLD.. -R1

Average air n1 Gearbox Size
speed (min-1) 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
Pto [kW] / without add. cooling
Vw = 0,5 m/s 1) - 12 16 20 26 31 37 44 53 67 76 86 104 126 126 165 202 209 238 269
Vw = 1,2 m/s 2) - 17 22 28 36 43 52 61 74 93 106 120 144 175 175 229 280 290 331 374
Vw = 4,0 m/s 3) - 22 28 36 45 55 66 79 94 119 136 154 184 224 224 293 358 371 424 479
Pt3 [kW] / with cooling coil
Vw = 0,5 m/s 1) - 34 65 45 93 80 166 139 231 195 350 291 378 400 506 657 694 701 730 761
Vw = 1,2 m/s 2) - 39 71 53 103 92 180 156 251 221 380 325 418 449 555 721 772 782 823 866
Vw = 4,0 m/s 3) - 44 78 61 113 104 194 173 272 247 410 359 458 498 604 785 850 863 916 971
1) Small closed room, little air movement
2) Large hall with free air movement
3) Constantly strong air movement

Table 4 : fw : Thermal Factor Thermal capacities of types PLC/PLD-S5 and - T6, -U3, -U4 on request
ED %
υ u[°C]
100 80 60 40 20
1.21 1.34 1.53 2.03 Table 5 : fA : Utilization Factor
10 1.14
Utilization Pe /PN [%]
20 1.00 1.06 1.17 1.34 1.78
30 0.86 0.91 1.00 1.15 1.53 20 30 40 50 60 70 80 90 100
40 0.71 0.76 0.84 0.96 1.27 0.7 0.8 0.86 0.9 0.93 0.96 0.98 0.99 1
50 0.57 0.61 0.67 0.77 1.02 For values less than 20% consult ELECON

46
Nominal Output Torques

Bevel Helical Units, 3-stage

Gearbox Size
Type

PLC 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
iN Nominal Output TorquesT2N [kNm]

18 59.3
3.26 8.86 16.8 33.9 105
20 60.4
416
22.4 3.1 8.2 16.5 24.6 32.0 57.0 104 131
79.0 239 483
25 23.3 59.3 134 400
3.26 8.86 16.8 33.9 47.0 105 297
28 22.8 60.4 76.0 129 161 235 460
5.41 416
31.5 3.1 8.2 16.5 24.6 32.0 43.7 57.0 104 131 164 286
79.0 239 483
35.5 5.1 8.86 23.3 59.3 134 161 194 343 400
3.26 16.8 33.9 47.0 105 297
40 8.36 22.8 60.4 76.0 129 164 235 460
5.41 416
45 3.1 8.2 16.5 24.6 32.0 43.7 57.0 104 131 160 286
79.0 239 483
50 5.1 8.86 11.8 23.3 59.3 134 155 400
3.26 16.8 33.9 47.0 105 297
56 8.36 22.8 60.4 76.0 129 164 235 460
5.41 416
63 3.1 24.6 43.7 104 131 160 286
8.2 16.5 32.0 57.0 79.0 239 483
71 3.16 5.1 23.3 101 134 155
47.0 297 400
80 129 161 235
5.41 22.8 76.0 460
90 43.7 126 164 232 286
100 42.8 160 283
5.1
112 155

Bevel Helical Units, 4-stage

Type Gearbox Size

PLD 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67

iN Nominal Output TorquesT2N [kNm]

71
3.26
80 8.86 59.3
16.8 33.9 105
90 3.1 8.36 60.4
416
100 8.2 16.5 24.6 32.0 57.0 104 131 483
3.26 79.0 239
112 8.86 23.3 59.3 134 400
5.41 16.8 33.9 47.0 105 297
125 3.1 8.36 22.8 60.4 76.0 129 161 235 460
416
140 5.1 8.2 16.5 24.6 32.0 43.7 57.0 104 131 164 286
3.26 79.0 239
160 8.86 23.3 59.3 134 160 194 343 400 483
5.41 16.8 33.9 47.0 105 129 297
180 3.1 8.36 22.8 60.4 76.0 161 235 460
416
200 5.1 8.2 16.5 24.6 32.0 43.7 57.0 104 131 164 286
3.26 79.0 239 483
224 8.86 11.8 16.8 23.3 59.3 134 160 400
5.41 33.9 47.0 105 129 297
250 3.1 8.36 22.8 60.4 76.0 161 235 460
416
280 3.16 5.1
16.5 24.6 32.0
43.7 104 131 164 286
8.2 57.0 79.0 239 483
315 23.3 101 134 160
5.41 47.0 297 400
355 129 161 235
22.8 76.0 460
400 43.7 126 164 232 286
5.1
450 42.8 160 283
500 155

47
 900-1121-MB 1/1
Dimensions 3.99

Type PLB 10-R1 … PLB 45-R1

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Type Weight Oil filling DIN 332 Form DS
∅ d2
∅ d1 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [l]
d1, d2
PLB 10 25 k6 406 85 321 148 50 k6 240 105 135 - 80 4.5
25 40...50 60...85 > 85
PLB 12 40 k6 533 120 413 190 65 304 135 169 - 160 10
M 10 M 16 M 20 M 24
PLB 16 50 k6 611 120 491 225 85 356 145 211 - 310 20
PLB 20 60 m6 723 145 578 255 120 433 190 243 - 500 40 Keys to DIN 6885/1 supplied by ELECON
PLB 25 75 m6 891 160 731 285 145 495 230 265 296 900 70
PLB 31 85 m6 1064 180 884 350 160 540 230 310 328 1400 120 Type of protection as per IP 55
PLB 40 100m6 1309 215 1094 440 155 665 290 375 328 2300 150
PLB 45 130m6 1530 250 1280 540 195 780 330 450 400 3900 220

b6 ∅ Fitting
c c6 e e8 f g g6 h n n6 o p p2 t t1 t2 u v w1 w2V w2H
Type -0.2 d H9 -0.2 ∅s ds x lmax
PLB 10 113 15 27 16 338 107 216 222 99 150 364 120 121 333 - 12 M10x45 218 50 - 192 195 99 39 27
PLB 12 147 16 32 22 448 147 284 292 138 190 480 163 155 404 - 14.5 M12x70 311 78 - 248 240 180 45 33
PLB 16 179 22 41 26 556 179 348 368 170 265 600 201 220 560 - 18.5 M16x110 396 99 - 306 325 194 58 36
PLB 20 210 26 48 33 662 207 410 442 194 315 714 233 262 663 - 24 M20x130 461 104 - 360 375 221 63 40
PLB 25 225 28 48 33 772 251 438 508 238 375 824 277 322 787 256 24 M20x160 574 152 - 388 60 309 71 71
PLB 31 265 30 48 33 928 297 522 618 284 425 980 323 373 887 302 28 M24x180 716 191 315 468 100 359 76 76
PLB 40 320 35 62 45 968 303 630 749 - 450 1220 421 400 913 357 28 M24x220 906 270 410 576 250 458 87 92
PLB 45 395 45 75 60 1197 371 774 914 - 475 1494 515 410 962 432 35 M30x160 1115 330 485 712 300 495 94 89
1) Hollow shaft and machine shaft see dimensions sheet 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions sheet 900-0253-MB1

48
 900-1121-MB2/2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension or douple ext. shaft.

4) Backstop, see 900-1154-MB1

⊗ G33, G34, G43, G44 : Hollow shaft with shrink disc only possible from size ≥ 31

K PLB 20 – R1 1 – V 11 – 14 – Z 1 Example

[z] Add. cooling

[0] Without add. cooling
[1] 1 Fan
[3] Cooling coil
[4] 1 Fan + Cooling Coil
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
*) [H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement
[0] Shaft mount. with torque arm
[1] Foot mounted
[3] Wall mounted *) *) Only sizes 10-31
[4] Wall mounted *)
➝
➝

[R1] Horizontal gear unit

Size
➝

Bevel-helical gear unit, EP-Series, [LB] 2 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

*) Except type PLB45

49
 900-1221-MB 1
Dimensions 3.99

Type PLC 14-R1 … PLC 31-R1

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Type Weight Oil filling DIN 332 Form DS
∅ d2
∅ d1 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [l]
d1, d2
PLC 14 25 k6 528 85 443 148 65 270 135 135 - 115 6
25 40...50 60...85 > 85
PLC 16 25 k6 584 85 499 148 85 290 145 145 - 170 9
M 10 M 16 M 20 M 24
PLC 18 40 k6 699 120 579 190 95 350 170 180 - 245 14
PLC 20 40 k6 753 120 633 190 120 370 190 180 - 335 19 Keys to DIN 6885/1 supplied by ELECON
PLC 22 50 k6 823 120 703 225 130 405 190 215 - 460 27
PLC 25 50 k6 881 120 761 225 145 450 230 220 296 595 34 Type of protection as per IP 55
PLC 28 60 m6 986 145 841 255 160 480 230 250 328 775 46
PLC 31 60 m6 1054 145 909 255 175 540 290 250 348 1065 62

Fitting
Type b6 ∅ h
-0.2 c c6 e e8 f g n1 n6 o p p2 ∅ t t1 t2 u v w1 w2v w2H
d H9 -0.2 s ds x lmax
PLC 14 113 15 27 16 474 121 216 344 150 500 134 121 333 - 12 M10x45 348 58 125 192 30 153 39 27
PLC 16 113 15 27 16 579 170 216 400 180 605 183 151 393 - 12 M10x80 453 107 217 192 75 153 49 27
PLC 18 147 18 32 22 622 155 284 458 190 654 171 155 419 - 14.5 M12x55 486 87 175 248 45 180 56 33
PLC 20 147 18 32 22 732 211 284 511 225 764 227 190 489 - 14.5 M12x90 596 143 285 248 70 180 56 33
PLC 22 179 24 41 26 782 193 346 580 235 826 215 190 513 - 18.5 M16x65 622 113 226 306 60 194 62 36
PLC 25 179 24 41 26 896 249 346 638 265 940 271 220 573 204 18.5 M16x90 736 169 340 306 100 194 67 62
PLC 28 210 28 48 33 948 230 408 706 280 1000 256 227 610 246 24 M20x80 752 132 265 360 80 221 70 70
PLC 31 210 28 48 33 1085 299 408 773 315 1137 325 262 680 239 24 M20x110 889 201 402 360 90 221 70 70

1) Hollow shaft and machine shaft see dimensions sheet 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions sheet 900-0253-MB1

50
 900-1221-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension or douple ext. shaft (900-1200-…)

4) Backstop, see 900-1254-MB1

K PLC 22 – R1 1 – V 11 – 25 – Z 1 Example

[z] Add. cooling

[0] Without add. cooling
[1] 1 Fan
[3] Cooling coil
[4] 1 Fan + Cooling Coil
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Foot mounted
[3] Wall mounted
[4] Wall mounted
➝
➝

[R1] Horizontal gear unit

Size
➝

Bevel-helical gear unit, EP-Series, [LC] 3 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

5) See dimension sheet 900-0220-MB9

51
 900-1221-MB 3/1
Dimensions 3.99

Type PLC 35-R1 … PLC 67-R1

Solid shaft
Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft d1, d2 75...85 100

Type Weight Oil filling
∅ d1 ∅ d2 Tapped centre holes in shaft ends
m6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [l] M 20 M 24
DIN 332 Form DS
PLC 35 75 1214 160 1054 285 155 570 290 280 328 1500 55
PLC 40 75 1291 160 1131 285 175 570 290 280 348 1830 75
PLC 42 85 1455 180 1275 350 195 650 330 320 400 2200 90 Keys to DIN 6885/1 supplied by ELECON
PLC 45 85 1521 180 1341 350 210 730 410 320 440 2750 130
PLC 47 85 1607 180 1427 350 230 730 410 320 440 3300 175 Type of protection as per IP 55
PLC 50 100 1792 215 1577 440 250 795 410 385 480 4350 180
PLC 53 100 1863 215 1648 440 250 795 410 385 480 4950 250
PLC 56 100 1956 215 1741 440 270 845 460 385 540 5450 350
PLC 60 130 2113 250 1863 540 290 920 460 460 540 7400 360
PLC 63 130 2186 250 1936 540 310 970 510 460 580 8400 460
PLC 67 130 2257 250 2007 540 310 970 510 460 580 9450 570

∅ h Fitting
Type b6 c c6 e e8 f g n n6 o p p2 t t1 t2 t3 u v w1 w2v w2H
d H9 -0.2 ∅s ds x Imax
PLC 35 225 32 55 40 1275 325 438 925 300 1315 345 255 610 262 24 M20x85 1005 190 325 695 396 190 239 82 87
PLC 40 225 32 55 40 1430 403 438 1002 375 1470 423 330 760 262 24 M20x120 1157 265 477 847 396 220 239 82 87
PLC 42 265 40 62 45 1555 392 514 1134 355 1615 422 305 720 303 28 M24x100 1230 225 390 820 460 250 270 90 85
PLC 45 265 40 62 45 1689 460 514 1200 425 1749 490 375 860 303 28 M24x120 1356 285 516 946 460 250 270 90 90
PLC 47 265 40 62 52 1860 545 514 1285 500 1920 575 440 1010 303 28 M24x250 1527 370 687 1117 460 250 270 90 100
PLC 50 320 50 75 60 1892 470 620 1392 425 1962 505 360 860 358 35 M30x120 1524 280 504 1014 560 250 333 105 110
PLC 53 320 50 75 60 2038 545 620 1463 500 2108 580 435 1010 358 35 M30x180 1670 355 650 1160 560 250 333 105 110
PLC 56 320 50 75 60 2231 645 620 1556 600 2301 680 535 1210 365 35 M30x250 1858 450 838 1348 560 250 333 105 110
PLC 60 395 60 90 65 2272 565 770 1669 530 2342 600 460 1070 440 42 M36x150 1840 345 630 1200 690 350 368 115 120
PLC 63 395 60 90 65 2420 640 770 1742 600 2490 675 530 1210 440 42 M36x200 1988 420 778 1348 690 350 368 115 120
PLC 67 395 60 90 70 2566 715 770 1806 670 2636 750 590 1350 440 42 M36x250 2134 495 924 1494 690 350 368 115 120

1) Hollow shaft and machine shaft see dimensions sheet 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions sheet 900-0253-MB1

52
 900-1221-MB4/1
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension

4) Backstop, see 900-1254-MB1/3.

K PLC 35 – R1 1 – V 11 – 25 – Z 1 Example

[z] Add. cooling

[0] Without add. cooling
[1] 1 Fan
[3] Cooling coil
[4] 1 Fan + Cooling Coil
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
*) [H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement
[0] Shaft mount. with torque arm
[1] Foot mounted
➝

[R1] Horizontal gear unit

➝

Size
➝

Bevel-helical gear unit, EP-Series, [LC] 3 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

*) Only types PLC35 and PLC40

53
 900-1321-MB 1
Dimensions 3.99

Type PLD 14-R1 … PLD 31-R1

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Type Weight Oil filling DIN 332 Form DS
∅ d1 ∅ d2
k6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [l]
d1, d2
PLD 14 20 552 80 472 148 65 270 135 135 - 105 6
20 25 40 65...85 > 85
PLD 16 20 608 80 528 148 85 290 145 145 - 170 9
M6 M 10 M 16 M 20 M 24
PLD 18 25 703 85 618 190 95 350 170 180 - 245 15
PLD 20 25 757 85 672 190 120 370 190 180 - 335 20 Keys to DIN 6885/1 supplied by ELECON
PLD 22 40 908 120 788 225 130 405 190 215 - 465 28
PLD 25 40 966 120 846 225 145 450 230 220 296 600 36 Type of protection as per IP 55
PLD 28 40 1021 120 901 255 160 480 230 250 328 770 48
PLD 31 40 1089 120 969 255 175 540 290 250 348 1060 65

∅ h Fitting
Type b6 c c6 e e8 f g n1 n6 o p p2 t t1 t2 u v w1 w2v w2H
d H9 -0.2 ∅s dS x I max
PLD 14 113 15 27 16 474 121 216 344 150 500 134 121 333 - 12 M10x45 348 58 125 192 25 182 39 27
PLD 16 113 15 27 16 579 170 216 400 180 605 183 151 393 - 12 M10x80 453 107 217 192 70 182 49 27
PLD 18 147 18 32 22 622 155 284 458 190 654 171 155 419 - 14.5 M12x55 486 87 175 248 35 219 56 33
PLD 20 147 18 32 22 732 211 284 511 225 764 227 190 489 - 14.5 M12x90 596 143 285 248 60 219 56 33
PLD 22 179 24 41 26 782 193 346 580 235 826 215 190 513 - 18.5 M16x65 622 113 226 306 50 279 62 36
PLD 25 179 24 41 26 896 249 346 638 265 940 271 220 573 204 18.5 M16x90 736 169 340 306 90 279 67 62
PLD 28 210 28 48 33 948 230 408 706 280 1000 256 227 610 246 24 M20x80 752 132 265 360 60 281 70 70
PLD 31 210 28 48 33 1085 299 408 773 315 1137 325 262 680 239 24 M20x110 889 201 402 360 70 281 70 70

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

54
 900-1321-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension, see 900-1200-…

4) Backstop, see 900-1254-MB1

K PLD 22 – R1 1 – V 11 – 250 – Z 3 Example

[z] Add. cooling

[0] Without add. cooling
[3] Cooling coil
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement
[0] Shaft mount. with torque arm
[1] Foot mounted
[3] Wall mounted
[4] Wall mounted
➝
➝

[R1] Horizontal gear unit

Size
➝

Bevel-helical gear unit, EP-Series, 4 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

5) See dimension sheet 900-0220-MB9

55
 900-1321-MB 3/1
Dimensions 3.99

Type PLD 35-R1 … PLD 67-R1

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft d1, d2 50 60...85 ≥ 155

Type Weight Oil filling
∅ d1 ∅ d2
m6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [l] Tapped centre holes in shaft ends
M 16 M 20 M 24
DIN 332 Form DS
PLD 35 50k6 1188 120 1068 285 155 570 290 280 328 1500 60
PLD 40 50k6 1265 120 1145 285 175 570 290 280 348 1830 80
Keys to DIN 6885/1 supplied by ELECON
PLD 42 60 1416 145 1271 350 195 650 330 320 400 2200 100
PLD 45 60 1482 145 1337 350 210 730 410 320 440 2750 140
Type of protection as per IP 55
PLD 47 60 1568 145 1423 350 230 730 410 320 440 3300 190
PLD 50 75 1748 160 1588 440 250 795 410 385 480 4200 200
PLD 53 75 1819 160 1659 440 250 795 410 385 480 4800 260
PLD 56 75 1912 160 1752 440 270 845 460 385 540 5850 360
PLD 60 85 2096 180 1916 540 290 920 460 460 540 7350 380
PLD 63 85 2169 180 1989 540 310 970 510 460 580 8350 480
PLD 67 85 2240 180 2060 540 310 970 510 460 580 9400 580

∅ h Fitting
Type b6 c c6 e e8 f g n n6 o p p2 t t1 t2 t3 u v w1 w2v w2H
d H9 -0.2 ∅ s ds x Imax
PLD 35 225 32 55 40 1275 325 438 925 300 1315 345 255 610 262 24 M20x85 1005 190 325 695 396 190 253 82 87
PLD 40 225 32 55 40 1430 403 438 1002 375 1470 423 330 760 262 24 M20x120 1157 265 477 847 396 220 253 82 87
PLD 42 265 40 62 45 1555 392 514 1134 355 1615 422 305 720 303 28 M24x100 1230 225 390 820 460 250 266 90 85
PLD 45 265 40 62 45 1689 460 514 1200 425 1749 490 375 860 303 28 M24x120 1356 285 516 946 460 250 266 90 90
PLD 47 265 40 62 52 1860 545 514 1285 500 1920 575 440 1010 303 28 M24x250 1527 370 687 1117 460 250 266 90 100
PLD 50 320 50 75 60 1892 470 620 1392 425 1962 505 360 860 358 35 M30x120 1524 280 504 1014 560 250 344 105 110
PLD 53 320 50 75 60 2038 545 620 1463 500 2108 580 435 1010 358 35 M30x180 1670 355 650 1160 560 250 344 105 110
PLD 56 320 50 75 60 2231 645 620 1556 600 2301 680 535 1210 365 35 M30x250 1858 450 838 1348 560 250 344 105 110
PLD 60 395 60 90 65 2272 565 770 1669 530 2342 600 460 1070 440 42 M36x150 1840 345 630 1200 690 350 421 115 120
PLD 63 395 60 90 65 2420 640 770 1742 600 2490 675 530 1210 440 42 M36x200 1988 420 778 1348 690 350 421 115 120
PLD 67 395 60 90 70 2566 715 770 1806 670 2636 750 590 1350 440 42 M36x250 2134 495 924 1494 690 350 421 115 120
1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1
3) Holding down bolts of min. property class 10.9.
4) Available for shaft d1; n ≥ 1000 mm -1, lower speed on request.

56
 900-1321-MB4/1
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension

4) Backstop, see 900-1254-MB1

K PLD 35 – R1 1 – V 11 – 250 – Z 3 Example

[z] Add. cooling

[0] Without add. cooling
[3] Cooling coil
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
*) [H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement
[0] Shaft mount. with torque arm
[1] Foot mounted
➝
➝

[R1] Horizontal gear unit

Size
➝

Bevel-helical gear unit, EP-Series, 4 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

*) Only types PLD35 and PLD40

57
 900-1225-MB 1
Dimensions 3.99

Type PLC 14-S5 … PLC 31-S5

Add. lubrication required, please check-back

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Type Weight Oil filling DIN 332 Form DS
∅ d2
∅ d1 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [l]
d1, d2
PLC 14 25 k6 528 85 443 148 65 270 135 135 - 115 10
25 40...50 60...85 > 85
PLC 16 25 k6 584 85 499 148 85 290 145 145 - 170 16
M 10 M 16 M 20 M 24
PLC 18 40 k6 699 120 579 190 95 350 170 180 - 245 24
PLC 20 40 k6 753 120 633 190 120 370 190 180 - 335 33 Keys to DIN 6885/1 supplied by ELECON
PLC 22 50 k6 823 120 703 225 130 405 190 215 - 460 44
PLC 25 50 k6 881 120 761 225 145 450 230 220 296 595 59 Type of protection as per IP 55
PLC 28 60 m6 986 145 841 255 160 480 230 250 328 775 74
PLC 31 60 m6 1054 145 909 255 175 540 290 250 348 1065 107

b6 ∅ h h2 Fitting
Type c6 c7 e7 f7 g h7 n2 o p2 p7 t7 u7 w2sv w2sH
-0.2
d H9 -0.2 -0.2 ∅ s7 ds x Imax
PLC 14 113 27 51 16 274 216 344 150 134 195 500 121 - 535 14.5 M12x90 206 194 38 26
PLC 16 113 27 51 16 334 216 400 180 183 225 605 151 - 640 14.5 M12x90 266 194 48 26
PLC 18 147 32 62 22 348 284 458 190 171 245 654 155 - 690 16.5 M14x100 260 258 51 28
PLC 20 147 32 62 22 414 284 511 225 227 280 764 190 - 795 16.5 M14x100 330 258 51 28
PLC 22 179 41 76 26 426 346 580 235 215 305 826 190 - 865 24 M20x130 326 312 59 33
PLC 25 179 41 77 26 486 346 638 265 271 335 940 220 204 980 24 M20x130 384 312 64 59
PLC 28 210 48 86 33 504 408 706 280 256 360 1000 227 246 1030 28 M24x150 386 366 67 67
PLC 31 210 48 95 33 574 408 773 315 325 395 1137 262 239 1165 28 M24x160 456 366 67 67

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

58
 900-1225-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension (900-1200-…)

4) Backstop, see 900-1254-MB1

K PLC 22 – S5 4 – V 11 – 25 – Z 0 Example

[z] Add. cooling

[0] Without add. cooling
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Wall mounted
[3] Wall mounted
[4] Wall mounted
[5] Foot mounted
➝
➝

[S5] Vertical mounting gear unit with right angle shafts, high speed shaft at the top
Size
➝

Bevel-helical gear unit EP-Series, [LC] 3 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

5) See dimension sheet 900-0220-MB9

59
 900-1325-MB 1
Dimensions 3.99

Type PLD 14-S5 … PLD 31-S5

Add. lubrication required, please check-back

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Type ∅ d1 Weight Oil filling DIN 332 Form DS
∅ d2 [kg] [l]
k6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2
d1, d2
PLD 14 20 552 80 472 148 65 270 135 135 - 105 13
20 25 40 65...85 > 85
PLD 16 20 608 80 528 148 85 290 145 145 - 170 19
M6 M 10 M 16 M 20 M 24
PLD 18 25 703 85 618 190 95 350 170 180 - 245 32
PLD 20 25 757 85 672 190 120 370 190 180 - 335 41 Keys to DIN 6885/1 supplied by ELECON
PLD 22 40 908 120 788 225 130 405 190 215 - 465 58
PLD 25 40 966 120 846 225 145 450 230 220 296 600 75 Type of protection as per IP 55
PLD 28 40 1021 120 901 255 160 480 230 250 328 770 98
PLD 31 40 1089 120 969 255 175 540 290 250 348 1060 135

b6 ∅ h h2 Fitting
Type c6 c7 e7 f7 g h7 n2 o p2 p7 t7 u7 w2sv w2SH
-0.2 d H9 -0.2 -0.2
∅ s7 ds x Imax
PLD 14 113 27 51 16 274 216 344 150 134 195 500 121 - 535 14.5 M12x90 206 194 38 26
PLD 16 113 27 51 16 334 216 400 180 183 225 605 151 - 640 14.5 M12x90 266 194 48 26
PLD 18 147 32 62 22 348 284 458 190 171 245 654 155 - 690 16.5 M14x100 260 258 51 28
PLD 20 147 32 62 22 414 284 511 225 227 280 764 190 - 795 16.5 M14x100 330 258 51 28
PLD 22 179 41 76 26 426 346 580 235 215 305 826 190 - 865 24 M20x130 326 312 59 33
PLD 25 179 41 77 26 486 346 638 265 271 335 940 220 204 980 24 M20x130 384 312 64 59
PLD 28 210 48 86 33 504 408 706 280 256 360 1000 227 246 1030 28 M24x150 386 366 67 67
PLD 31 210 48 95 33 574 408 773 315 325 395 1137 262 239 1165 28 M24x160 456 366 67 67

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

60
 900-1325-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension (900-1200-…)

4) Backstop, see 900-1254-MB1

K PLD 22 – S5 1 – V 11 – 250 – Z 0 Example

[z] Add. cooling

[0] Without add. cooling
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Wall mounted
[3] Wall mounted
[4] Wall mounted
[5] Foot mounted
➝
➝

[S5] Vertical mounting gear unit with right angle shafts, high speed shaft at the top
Size
➝

Bevel-helical gear unit EP-Series, [LD] 4 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

5) See dimension sheet 900-0220-MB9

61
 900-1226-MB 1
Dimensions 3.99

Type PLC 14-T6 … PLC 31-T6

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Type Weight Oil filling DIN 332 Form DS
∅ d2 l2 [kg]
∅ d1 k1 l1 m 1 ∅ x1 m6
k2 m2 ∅ x2 [l]
d1, d2
PLC 14 25 k6 528 85 443 148 65 270 135 135 - 115 9
25 40...50 60...85 > 85
PLC 16 25 k6 584 85 499 148 85 290 145 145 - 170 14
M 10 M 16 M 20 M 24
PLC 18 40 k6 699 120 579 190 95 350 170 180 - 245 24
PLC 20 40 k6 753 120 633 190 120 370 190 180 - 335 30 Keys to DIN 6885/1 supplied by ELECON
PLC 22 50 k6 823 120 703 225 130 405 190 215 - 460 45
PLC 25 50 k6 881 120 761 225 145 450 230 220 296 595 56 Type of protection as per IP 55
PLC 28 60 m6 986 145 841 255 160 480 230 250 328 775 77
PLC 31 60 m6 1054 145 909 255 175 540 290 250 348 1065 100

b6 ∅ h h2 Fitting
Type c6 c8 e7 f7 g h7 h8 n2 o p2 p7 t7 u7 w2sv w2sh
-0.2 d H9 -0.2 -0.2
∅ s8 ds x Imax
PLC 14 113 27 57 16 274 216 344 150 366 195 183 500 121 - 535 14.5 M12x90 206 194 38 26
PLC 16 113 27 57 16 334 216 400 180 422 225 213 605 151 - 640 14.5 M12x90 266 194 48 26
PLC 18 147 32 64 22 348 284 458 190 483 245 229 654 155 - 690 16.5 M14x100 260 258 51 28
PLC 20 147 32 64 22 414 284 511 225 537 280 264 764 190 - 795 16.5 M14x100 330 258 51 28
PLC 22 179 41 76 26 426 346 580 235 611 305 278 826 190 - 865 24 M20x130 326 312 59 33
PLC 25 179 41 77 26 486 346 638 265 669 335 308 940 220 204 980 24 M20x130 384 312 64 59
PLC 28 210 48 92 33 504 408 706 280 744 360 330 1000 227 246 1030 28 M24x150 386 366 67 67
PLC 31 210 48 95 33 574 408 773 315 812 395 365 1137 262 239 1165 28 M24x160 456 366 67 67

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

66 62
 900-1226-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension (900-1200-…)

4) Backstop, see 900-1254-MB1

K PLC 22 – T6 6 – V 11 – 25 – Z 0 Example

[z] Add. cooling

[0] Without add. cooling
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Wall mounted
[3] Wall mounted
[4] Wall mounted
[6] Foot mounted
➝
➝

[T6] Vertical mounting gear unit with right angle shafts, high speed shaft downward
Size
➝

Bevel-helical gear unit EP-Series, [LC] 3 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

5) See dimension sheet 900-0220-MB9

63
 900-1326-MB 1
Dimensions 3.99

Type PLD 14-T6 … PLD 31-T6

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Type ∅ d1 Weight Oil filling DIN 332 Form DS
∅ d2
k6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [l]
d1, d2
PLD 14 20 552 80 472 148 65 270 135 135 - 105 9
20 25 40 65...85 > 85
PLD 16 20 608 80 528 148 85 290 145 145 - 170 14
M6 M 10 M 16 M 20 M 24
PLD 18 25 703 85 618 190 95 350 170 180 - 245 23
PLD 20 25 757 85 672 190 120 370 190 180 - 335 30 Keys to DIN 6885/1 supplied by ELECON
PLD 22 40 908 120 788 225 130 405 190 215 - 465 45
PLD 25 40 966 120 846 225 145 450 230 220 296 600 55 Type of protection as per IP 55
PLD 28 40 1021 120 901 255 160 480 230 250 328 770 76
PLD 31 40 1089 120 969 255 175 540 290 250 348 1060 100

b6 ∅ h h2 Fitting
Type c6 c8 e7 f7 g h7 h8 n2 o p2 p7 t7 u7 w2SV w2SH
-0.2
d H9 -0.2 -0.2
∅ s8 ds x Imax
PLD 14 113 27 57 16 274 216 344 150 366 195 183 500 121 - 535 14.5 M12x90 206 194 38 26
PLD 16 113 27 57 16 334 216 400 180 422 225 213 605 151 - 640 14.5 M12x90 266 194 48 26
PLD 18 147 32 64 22 348 284 458 190 483 245 229 654 155 - 690 16.5 M14x100 260 258 51 28
PLD 20 147 32 64 22 414 284 511 225 537 280 264 764 190 - 795 16.5 M14x100 330 258 51 28
PLD 22 179 41 76 26 426 346 580 235 611 305 278 826 190 - 865 24 M20x130 326 312 59 33
PLD 25 179 41 77 26 486 346 638 265 669 335 308 940 220 204 980 24 M20x130 384 312 64 59
PLD 28 210 48 92 33 504 408 706 280 744 360 330 1000 227 246 1030 28 M24x150 386 366 67 67
PLD 31 210 48 95 33 574 408 773 315 812 395 365 1137 262 239 1165 28 M24x160 456 366 67 67

1) Hollow shaft and machine shaft see dimensions 900-0212 MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

64
 900-1326-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension (900-1200-…)

4) Backstop, see 900-1254-MB1

K PLD 22 – T6 4 – V 11 – 250 – Z 0 Example

[z] Add. cooling

[0] Without add. cooling
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement
[0] Shaft mount. with torque arm
[1] Wall mounted
[3] Wall mounted
[4] Wall mounted
[6] Foot mounted
➝
➝

[T6] Vertical mounting gear unit with right angle shafts, high speed shaft downward
Size
➝

Bevel-helical gear unit EP-Series, [LD] 4 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

5) See dimension sheet 900-0220-MB9

65
 900-1223-MB 1
Dimensions 3.99

Type PLC 14-U3 … PLC 31-U3

Add. lubrication required, please check-back

Hollow shaft

Solid shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Type Weight Oil filling DIN 332 Form DS
∅ d2 [kg] [l]
∅ d1 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 y2 d1, d2
PLC 14 25 k6 528 85 443 148 65 270 135 135 - 210 125 10
25 40...50 60...85 > 85
PLC 16 25 k6 584 85 499 148 85 290 145 145 - 270 180 15
40 k6 M 10 M 16 M 20 M 24
PLC 18 699 120 579 190 95 350 170 180 - 270 255 26
PLC 20 40 k6 753 120 633 190 120 370 190 180 - 340 345 34
Keys to DIN 6885/1 supplied by ELECON
PLC 22 50 k6 823 120 703 225 130 405 190 215 - 330 470 48
PLC 25 50 k6 881 120 761 225 145 450 230 220 - 390 605 52
Type of protection as per IP 55
PLC 28 60 m6 986 145 841 255 160 480 230 250 - 400 785 82
PLC 31 60 m6 1054 145 909 255 175 540 290 250 - 470 1075 93

Fitting
b6
Type c6 e5 e6 f6 g g6 h n1 n6 o p p2 P6 w1U x6
-0.2
-0.2
∅ dH9 ds x Imax
3)
PLC 14 113 27 357 126 274 344 113 150 500 134 121 333 - 270 16 M14x65 99 130
PLC 16 113 27 413 175 334 400 162 180 605 183 151 313 - 270 16 M14x65 99 130
PLC 18 147 32 475 162 348 458 145 190 654 171 155 419 - 340 22 M20x80 121 130
PLC 20 147 32 528 218 418 511 201 225 764 227 190 489 - 340 22 M20x80 122 130
PLC 22 179 41 600 200 426 580 180 235 826 215 190 513 - 416 26 M24x100 123 130
PLC 25 179 41 658 256 486 638 236 265 940 271 220 573 204 416 26 M24x100 123 130
PLC 28 210 48 731 245 508 706 221 280 1000 256 227 610 246 480 33 M30x120 135 130
PLC 31 210 48 798 307 578 773 282 315 1137 325 262 680 239 480 33 M30x120 135 130

1. Dimensions of hollow shaft and machine shaft on request

2. Torque arms see dimensions 900-253-MB1
3. Holding down bolts of min. property class10.9
4. Available for shaft d1 : n ≥ 1000 min—1 lower speed on request

66
 900-1223-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension (900-1200-…)

4) Backstop, see 900-1254-MB1

K PLC 22 – U3 3 – V 11 – 25 – Z 3 Example

[z] Add. cooling

[0] Without add. cooling
[1] 1 Fan
[3] Cooling coil
[4] 1 Fan + Cooling coil
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 8)
[0] Shaft mount. with torque arm
[1] Wall mounted
[3] Foot mounted
➝
➝

[U3] Vertical gear unit

Size
➝

Bevel-helical gear unit, EP-Series, [LC] 3 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

7) Only location of shafts : 1, 3 and 5

8) see dimension sheet 900-0220-MB9

67
 900-1223-MB 3/1
Dimensions 3.99

Type PLC 35-U3 … PLC 67-U3

Add. lubrication required, please check-back

Hollow shaft

Solid shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft d1, d2 75...85 > 100

Type ∅ d1 Weight Oil filling
∅ d2
m6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 y2 [kg] [l] Tapped centre holes in shaft ends M 20 M 24
DIN 332 Form DS
PLC 35 75 1214 160 1054 285 155 570 290 280 328 440 1530 95
PLC 40 75 1291 160 1131 285 175 570 290 280 348 590 1860 130
PLC 42 85 1455 180 1275 350 195 650 330 320 400 530 2230 155 Keys to DIN 6885/1 supplied by ELECON
PLC 45 85 1521 180 1341 350 210 730 410 320 440 670 2780 225
PLC 47 85 1607 180 1427 350 230 730 410 320 440 780 3330 305 Type of protection as per IP 55
PLC 50 100 1792 215 1577 440 250 795 410 385 480 590 4300 290
PLC 53 100 1863 215 1648 440 250 795 410 385 480 740 4900 400
PLC 56 100 1956 215 1741 440 270 845 460 385 540 940 5600 550
PLC 60
PLC 63
PLC 67

Fitting
Type b6 c6 f6 g g6 h n n6 o p p2 p6 ∅ dH9 dS x lmax W1U
-0.2 -0.2
3)
PLC 35 225 55 578 925 305 300 1315 345 255 610 262 510 40 M36x330 129
PLC 40 225 55 728 1002 382 375 1470 423 330 760 262 510 40 M36x330 129
PLC 42 265 62 680 1134 372 355 1615 422 305 720 303 590 45 M42x400 141
PLC 45 265 62 820 1200 440 425 1749 490 375 860 303 590 45 M42x400 141
PLC 47 265 62 970 1285 525 500 1920 575 440 1010 303 590 52 M48x400 142
PLC 50 320 75 820 1392 450 425 1962 505 360 910 358 710 60 M56x400 185
PLC 53 320 75 970 1463 525 500 2108 580 435 1060 358 710 60 M56x400 185
PLC 56 320 75 1170 1556 625 600 2301 680 535 1260 365 715 60 M56x400 185
PLC 60
PLC 63
PLC 67

1. Dimensions of hollow shaft and machine shaft on request

2. Torque arms see dimensions 900-253-MB1
3. Foundation bolts of min. property class10.9
4. Available for shaft d1 : n ≥ 1000 min–1 lower speed on request

68
 900-1223-MB4/1
Location of input and output shafts 3.99

Directions of rotation viewing ➪

5) Add. shaft extension

6) Backstop, see 900-1254-MB1

K PLC 35 – U3 3 – V 11 – 25 – Z 3 Example

[z] Add. cooling

[0] Without add. cooling
[1] 1 Fan
[3] Cooling coil 7)
[4] 1 Fan + Cooling coil 7)
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
*) [H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement
[0] Shaft mount. with torque arm
[1] Wall mounted
[3] Foot mounted
➝
➝

[U3] Vertical gear unit

Size
➝

Bevel-helical gear unit, EP-Series, [LC] 3 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

7) Only location of shafts : 1, 3 and 5

*) Only types PLC35 and PLC40

69
 900-1323-MB 1
Dimensions 3.99

Type PLD 14-U3 … PLD 31-U3

Add. lubrication required, please check-back

Hollow shaft

Solid shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Type Weight Oil filling DIN 332 Form DS
∅ d1 ∅ d2 [kg] [l]
k6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ø x2 y2 d1, d2
PLD 14 20 552 80 472 148 65 270 135 135 - 210 125 11 25 40 65...85 > 85
20
PLD 16 20 608 80 528 148 85 290 145 145 - 270 180 16
M6 M 10 M 16 M 20 M 24
PLD 18 25 703 85 618 190 95 350 170 180 - 270 255 25
PLD 20 25 757 85 672 190 120 370 190 180 - 340 345 34
Keys to DIN 6885/1 supplied by ELECON
PLD 22 40 908 120 788 225 130 405 190 215 - 330 475 49
PLD 25 40 966 120 846 225 145 450 230 220 - 390 610 53
Type of protection as per IP 55
PLD 28 40 1021 120 901 255 160 480 230 250 - 400 780 83
PLD 31 40 1089 120 969 255 175 540 290 250 - 470 1070 95

Fitting
b6
Type -0.2
c6 e5 e6 f6 g g6 h n1 n6 o p p2 P6 ∅d H9 ds x lmax W1U x6
-0.2
3)
PLD 14 113 27 357 126 274 344 113 150 500 134 121 333 - 270 16 M14x65 128 130
PLD 16 113 27 413 175 334 400 162 180 605 183 151 393 - 270 16 M14x65 128 130
PLD 18 147 32 475 162 348 458 145 190 654 171 155 419 - 340 22 M20x80 160 130
PLD 20 147 32 528 218 418 511 201 225 764 227 190 489 - 340 22 M20x80 161 130
PLD 22 179 41 600 200 426 580 180 235 826 215 190 513 - 416 26 M24x100 208 130
PLD 25 179 41 658 256 486 638 236 265 940 271 220 573 204 416 26 M24x100 208 130
PLD 28 210 48 731 245 508 706 221 280 1000 256 227 610 246 480 33 M30x120 195 130
PLD 31 210 48 798 307 578 773 282 315 1137 325 262 680 239 480 33 M30x120 195 130

1. Dimensions of hollow shaft and machine shaft on request

2. Torque arms see dimensions 900-0253-MB1
3. Holding down bolts of min. property class10.9
4. Available for shaft d1 : n ≥ 1000 min–1 lower speed on request

70
 900-1323-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

5) Add. shaft extension (900-1200-…)

6) Backstop, see 900-1254-MB1

K PLD 22 – U3 3 – V 11 – 250 – Z 3 Example

[z] Add. cooling

[0] Without add. cooling
[3] Cooling coil 7)
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 8)
[0] Shaft mount. with torque arm
[1] Wall mounted
[3] Foot mounted
➝
➝

[U3] Vertical gear unit

Size
➝

Bevel-helical gear unit, EP-Series, [LD] 4 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate

7) Only location of shafts : 1, 3 and 5

8) see dimension sheet 900-0220-MB9

71
 900-1323-MB 3/1
Dimensions 3.99

Type PLD 35-U3 … PLD 67-U3

Add. lubrication required, please check-back

Hollow shaft

Solid shaft
Filling Plug yellow
Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft d1, d2 50 60...85 ≥ 155

Type ∅ d1 Weight Oil filling
∅ d2
k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 y2 [kg] [l] Tapped centre holes in shaft ends M 16 M 20 M 24
m6
DIN 332 Form DS
PLD 35 50 k6 1188 120 1068 285 155 570 290 280 328 440 1530 100
PLD 40 50 k6 1265 120 1145 285 175 570 290 280 348 590 1860 135
PLD 42 60 1416 145 1271 350 195 650 330 320 400 530 2230 170
PLD 45 60 1482 145 1337 350 210 730 410 320 440 670 2780 240 Keys to DIN 6885/1 supplied by ELECON
PLD 47 60 1568 145 1423 350 230 730 410 320 440 780 3330 325
PLD 50 75 1748 160 1588 440 250 795 410 385 480 590 4300 290 Type of protection as per IP 55
PLD 53 75 1819 160 1659 440 250 795 410 385 480 740 4900 400
PLD 56 75 1912 160 1752 440 270 845 460 385 540 940 5600 550
PLD 60
PLD 63
PLD 67

Fitting
Type b6 c6 f6 g g6 h n n6 o p p2 p6 ∅d H9 dS x lmax W1U
-0.2 -0.2
3)
PLD 35 225 55 578 925 305 300 1315 345 255 610 262 510 40 M36x330 143
PLD 40 225 55 728 1002 382 375 1470 423 330 760 262 510 40 M36x330 143
PLD 42 265 62 680 1134 372 355 1615 422 305 720 303 590 45 M42x400 137
PLD 45 265 62 820 1200 440 425 1749 490 375 860 303 590 45 M42x400 137
PLD 47 265 62 970 1285 525 500 1920 575 440 1010 303 590 52 M42x400 138
PLD 50 320 75 820 1392 450 425 1962 505 360 910 358 710 60 M56x400 196
PLD 53 320 75 970 1463 525 500 2108 580 435 1060 358 710 60 M56x400 196
PLD 56 320 75 1170 1556 625 600 2301 680 535 1260 365 715 60 M56x400 196
PLD 60
PLD 63
PLD 67

1. Dimensions of hollow shaft and machine shaft on request

2. Torque arms see dimensions 900-253-MB1

72
 900-1323-MB4/1
Location of input and output shafts 3.99

Directions of rotation viewing ➪

5) Add. shaft extension

6) Backstop, see 900-1254-MB1

K PLD 35 – U3 3 – V 11 – 250 – Z 3 Example

[z] Add. cooling

[0] Without add. cooling
[3] Cooling coil 7)
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
*) [H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement
[0] Shaft mount. with torque arm
[1] Wall mounted
[3] Foot mounted
➝
➝

[U3] Vertical gear unit

Size
➝

Bevel-helical gear unit, EP-Series, [LD] 4 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate
7) Only location of Shaft : .1, .3 and .5
*) Only types PLD35 and PLD40
73
Power ratings
Type Gearbox Size
PWC 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
iN n1 n2
[min-1] Nominal Power PN [kW]
1500 60 20 56 106 213 372 660 1220 2160
25 1000 40 13 37 71 142 248 440 812 1440
1500 54 18 47 94 190 339 589 1090 1930 2330
28 1000 35.5 12 31 63 127 226 393 725 1285 1560
1500 47.5 15.4 41 82 123 160 283 394 519 653 966 1190 1710 2075 2410
31.5 1000 31.5 10 27 54 82 107 188 263 346 435 644 795 1140 1385 1610
1500 42.5 14 39 52 74 103 150 208 262 350 465 591 858 1060 1315 1520 1770 2140
35.5
Compact Drives, three-stage

1000 28 9.3 26 35 49 69 100 139 175 233 310 394 572 705 875 1015 1180 1425
1500 37.5 13 21 33 46 66 89 133 185 237 298 413 505 633 761 921 1170 1350 1635 1810
40 1000 25 8.7 14 22 31 44 60 89 123 158 199 275 337 422 507 614 777 900 1090 1200
1500 33.5 11 19 29 41 58 86 112 152 200 276 363 457 574 677 835 1000 1200 1450 1690
45 1000 22.2 7.2 13 19 27 38 57 75 101 133 184 242 305 383 451 557 665 800 968 1125
1500 30 10 16 28 37 53 73 106 148 186 248 330 420 502 609 751 932 1080 1260 1520
50 1000 20 6.7 11 19 25 35 49 71 99 124 165 220 280 335 406 501 621 719 838 1010
1500 27 9.1 15 23 33 47 64 95 132 169 215 295 361 452 544 658 833 963 1170 1290
56 1000 17.9 6.1 10 15 22 31 43 63 88 113 142 197 241 301 363 439 555 642 778 860
1500 23.8 7.7 13 20 29 41 61 80 109 142 197 259 327 410 483 596 712 856 1040 1205
63 1000 16 5.2 8.7 14 20 28 41 53 73 95 131 173 218 273 322 397 475 571 691 803
1500 21 7.0 11 18 26 37 51 71 104 126 175 222 295 353 429 529 657 754 885 1070
71 1000 14 4.7 7.5 12 17 25 34 47 69 84 117 148 197 235 286 353 438 503 590 713
1500 18.8 11 23 45 92 150 252 317 461 583 788 903
80 1000 12.5 7.3 15 29 61 99 168 211 307 389 524 602
1500 16.7 9.4 21 40 76 133 220 287 405 498 804
90 1000 11.1 6.3 14 27 51 89 146 191 270 332 535
1500 15 8.0 19 67 251 444
100 1000 10 5.3 12 45 167 296
1500 13.4 7.2 218
112 1000 8.9 4.8 144

Type Gearbox Size

PWD 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
n1 n2
iN [min-1] Nominal Power PN [kW]
1500 21 7.2
71 1000 14 4.8
1500 18.8 6.4 17 33 67 116 206 381 674
80 1000 12.5 4.3 11 22 45 77 137 254 450
1500 16.7 5.4 15 29 59 105 183 338 600 726
90 1000 11.1 3.6 10 19 39 70 122 225 400 484
1500 15 5.1 12.9 26 39 50 90 124 163 206 304 376 539 653 760
100 1000 10 3.4 8.6 17.3 26 33 60 83 109 137 203 251 360 435 506
1500 13.4 4.6 7.6 12 17 24 33 48 66 83 111 147 187 272 335 416 482 561 677
112 1000 8.9 3.1 5.1 8.0 11 16 22 32 44 55 74 98 125 181 223 277 321 374 451
1500 12 3.9 6.8 11 15 21 29 43 59 76 96 132 162 203 244 295 373 432 523 578
125 1000 8 2.5 4.5 7.3 10 14 19 29 39 51 64 88 108 135 163 197 249 288 349 385
Compact Drives, four-stage

1500 10.7 3.7 5.7 9.5 13.2 18.5 28 36 49 64 89 117 147 184 217 267 320 385 467 542
140 1000 7.1 2.5 3.8 6.1 8.8 12.3 19 24 33 42 59 78 98 123 145 179 213 257 311 361
1500 9.4 3.2 5.3 8.7 12 17 23 33 46 58 78 103 131 157 190 235 291 337 393 474
160 1000 6.3 2.1 3.5 5.8 8.0 11 15 22 31 39 52 69 87 105 127 157 194 225 262 316
1500 8.33 2.7 4.7 7.3 10 15 19 30 41 53 66 92 112 141 169 205 259 300 363 401
180 1000 5.55 1.8 3.1 4.9 6.7 10 13 20 27 35 44 61 75 94 113 137 173 200 242 267
1500 7.5 2.6 4.0 6.4 9.3 13 20 25 34 45 62 82 103 129 152 188 224 270 327 380
200 1000 5 1.7 2.7 4.3 6.2 8.6 13 17 23 30 41 55 69 86 101 125 149 180 218 253
1500 6.7 2.3 3.8 6.2 8.3 12 16 24 33 42 55 74 94 112 136 167 208 241 281 340
224 1000 4.46 1.5 2.5 4.1 5.5 8.0 11 16 22 28 37 49 63 75 91 112 139 161 187 226
1500 6 1.9 3.4 5.3 7.4 11 14 21 30 38 48 66 81 101 122 147 186 216 261 290
250 1000 4 1.3 2.3 3.5 4.9 7.3 9.5 14 20 25 32 44 54 67 81 98 124 144 174 193
1500 5.36 1.8 2.9 4.6 6.6 9.2 14 18 25 32 44 58 74 92 109 134 160 193 233 271
280 1000 3.57 1.2 1.9 3.0 4.4 6.1 9.3 12 17 21 29 39 49 61 73 89 107 129 155 181
1500 4.76 2.7 4.1 5.9 8.2 12 16 23 28 39 50 67 80 97 119 148 171 200 241
315 1000 3.17 1.8 2.7 3.9 5.5 8.0 11 15 19 26 33 45 53 65 79 99 114 133 161
1500 4.22 2.4 5.2 10 21 34 57 71 104 131 177 204
355 1000 2.82 1.6 3.5 6.7 14 22 38 47 69 87 118 136
1500 3.75 2.0 4.6 9.0 17 30 50 65 91 112 181
400 1000 2.5 1.3 3.1 6.0 11 20 33 43 61 75 120
1500 3.35 1.8 4.1 15 56 99
450 1000 2.22 1.2 2.7 10 37 66
1500 3 49
500 1000 2 32

74
Thermal capacities
Type PWC.. -R1
Add. lubrication required
Gearbox Size
Average air n1
speed (min-1) 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
Pto [kW] / without add. cooling
Vw = 0.5 m/s 1) - 15 20 25 32 39 47 55 66 95 109 123 148 180 180 212 259 268 306 346
Vw = 1.2 m/s 2) - 21 28 35 44 54 65 77 92 132 151 171 206 250 250 295 360 372 425 480
Vw = 4.0 m/s 3) - 27 35 45 56 69 83 99 118 169 193 219 264 320 320 378 461 476 544 614
Pt1 [kW] / with fan
- 1500 41 54 68 86 105 126 149 179 257 294 333 401 485 485 574 700
On request
- 1000 30 40 51 64 78 94 111 133 191 218 247 298 360 360 425 520
Pt3 [kW] / with cooling coil
Vw = 0.5 m/s 1) - 43 82 57 116 123 207 174 288 278 500 415 539 571 669 845 892 901 939 979
Vw = 1.2 m/s 2) - 49 89 67 128 138 225 195 314 315 542 463 597 641 739 928 993 1005 1058 1113
Vw = 4.0 m/s 3) - 55 97 76 141 153 243 216 340 352 584 511 655 711 809 1011 1094 1109 1177 1247
Pt4 [kW] / with fan and cooling coil
- 1500 69 116 100 170 189 286 267 401 440 686 626 793 877 974 1207 1333
On request
- 1000 58 102 83 148 162 254 229 355 374 610 540 690 752 849 1058 1153
Vw = 0.5 m/s Pt0 and Pt3 - Meant for Gearbox size 35-67. 22.4 22.4 28 28 28 31.5 31.5 31.5 35.5 35.5 35.5
are applicable from ratios, indicated.
Vw = 1.2 m/s (For smaller ratio; consult ELECON) 18 22.4 18 22.4 28 22.4 22.4 25 25 25 28

Type PWD.. -R1

Add. lubrication required
Average air n1 Gearbox Size
speed (min ) -1
14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
Pto [kW] / without add. cooling
Vw = 0.5 m/s 1) - 12 16 20 26 31 37 44 53 67 76 86 104 126 126 165 202 209 238 269
Vw = 1.2 m/s 2) - 17 22 28 36 43 52 61 74 93 106 120 144 175 175 229 280 290 331 374
Vw = 4.0 m/s 3) - 22 28 36 45 55 66 79 94 119 136 154 184 224 224 293 358 371 424 479
Pt3 [kW] / with cooling coil
Vw = 0.5 m/s 1) - 34 65 45 93 80 166 139 231 195 350 291 378 400 506 657 694 701 730 761
Vw = 1.2 m/s 2) - 39 71 53 103 92 180 156 251 221 380 325 418 449 555 721 772 782 823 866
Vw = 4.0 m/s 3) - 44 78 61 113 104 194 173 272 247 410 359 458 498 604 785 850 863 916 971

1) Small closed room, little air movement

2) Large hall with free air movement
3) Constantly strong air movement

Table 4 : fw : Thermal Factor Thermal capacities of types PWC/PWD-S5 and - T6, -U3, -U4 on request

ED %
ϑ u[°C]
100 80 60 40 20
Table 5 : fA : Utilization Factor
10 1.14 1.21 1.34 1.53 2.03
20 1.00 1.06 1.17 1.34 1.78 Utilization Pe /PN [%]

30 0.86 0.91 1.00 1.15 1.53 20 30 40 50 60 70 80 90 100

40 0.71 0.76 0.84 0.96 1.27 0.7 0.8 0.86 0.9 0.93 0.96 0.98 0.99 1
50 0.57 0.61 0.67 0.77 1.02 For values less than 20% consult ELECON
75
Nominal Output Torques

Compact Drives, 3-stage

Type Gearbox Size

PWC 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67

iN Nominal Output Torques T2N [kNm]

25 59.3
3.26 8.86 16.8 33.9 105
28 60.4
416
31.5 3.1 8.2 16.5 24.6 32.0 57.0 104 131
79.0 239 483
35.5 8.86 23.3 59.3 134 400
3.26 16.8 33.9 47.0 105 297
40 8.36 22.8 60.4 76.0 129 161 460
5.41 194 235 416
45 3.1 8.2 16.5 24.6 32.0 43.7 57.0 104 131 164 286
239 343 483
50 5.1 8.86 23.3 59.3 79.0 134 160 400
3.26 16.8 33.9 47.0 105 297
56 8.36 22.8 60.4 76.0 129 161 235 460
5.41 11.8 416
63 3.1 24.6 43.7 104 131 164 286
8.2 16.5 32.0 57.0 79.0 239 483
71 3.16 5.1 23.3 101 134 160
47.0 297 400
80 22.8 129 161 235
5.41 76.0 460
90 43.7 126 164 232 286
100 42.8 160 283
5.1
112 155

Compect Drives, 4-stage

Type Gearbox Size

PWD 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67

iN Nominal Output Torques T2N [kNm]

71
3.26
80 8.86 59.3
16.8 33.9 105
90 3.1 8.36 60.4
416
100 8.2 16.5 24.6 32.0 57.0 104 131
3.26 79.0 239 483
112 8.86 23.3 59.3 134 400
16.8 33.9 47.0 105 297
125 3.1 5.41 8.36 22.8 60.4 76.0 129 161 235 460
416
140 5.1 8.2 16.5 24.6 32.0 43.7 57.0 104 131 164 286
3.26 79.0 194 239 483
160 8.86 23.3 59.3 134 160 343 400
5.41 16.8 33.9 47.0 105 297
180 3.1 8.36 22.8 60.4 76.0 129 161 235 460
416
200 5.1 8.2 16.5 24.6 32.0 43.7 57.0 104 131 164 286
3.26 79.0 239 483
224 8.86 11.8 23.3 59.3 134 160 400
5.41 16.8 33.9 47.0 105 297
250 3.1 8.36 22.8 60.4 76.0 129 161 235 460
416
280 3.16 5.1 16.5 24.6 43.7 104 131 164 286
8.2 32.0 57.0 79.0 101 134 239 483
315 23.3 160
5.41 47.0 297 400
355 129 161 235
22.8 76.0 460
400 43.7 126 164 232 286
5.1
450 42.8 160 283
500 155

76
NOTES

77
 900-2221-MB 1
Dimensions 3.99

Type PWC 14-R1 … PWC 31-R1

Add. lubrication required, please check-back

Solid shaft
Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Type Weight Oil filling
∅ d1 ∅ d2 DIN 332 Form DS
k6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [I]
PWC 14 25 312 85 227 148 65 270 135 135 - 115 6
25 40…50 60…85 > 85
PWC 16 25 312 85 227 148 85 290 145 145 - 170 9
M 10 M 16 M 20 M 24
PWC 18 40 406 120 286 190 95 350 170 180 - 245 14
PWC 20 40 406 120 286 190 120 370 190 180 - 335 19 Keys to DIN 6885/1 supplied by ELECON
PWC 22 50 447 120 327 225 130 405 190 215 - 460 27
PWC 25 50 447 120 327 225 145 450 230 220 296 595 34 Type of protection as per IP 55
PWC 28 60m6 522 145 377 255 160 480 230 250 328 775 46
PWC 31 60m6 522 145 377 255 175 540 290 250 348 1065 62

∅ h Fitting
Type a b6 c c6 e e8 f g n n6 o p p2 t t1 t2 u v w2v w2H
d H9 -0.2 ∅s ds x Imax
PWC 14 216 113 15 27 16 474 121 216 344 150 500 134 121 333 - 12 M10x45 348 58 125 192 30 39 27
PWC 16 272 113 15 27 16 579 170 216 400 180 605 183 151 393 - 12 M10x80 453 107 217 192 75 49 27
PWC 18 293 147 18 32 22 622 155 284 458 190 654 171 155 419 - 14.5 M12x55 486 87 175 248 45 56 33
PWC 20 347 147 18 32 22 732 211 284 511 225 764 227 190 489 - 14.5 M12x90 596 143 285 248 70 56 33
PWC 22 376 179 24 41 26 782 193 346 580 235 826 215 190 513 - 18.5 M16x65 622 113 226 306 60 62 36
PWC 25 434 179 24 41 26 896 249 346 638 265 940 271 220 573 204 18.5 M16x90 736 169 340 306 100 67 62
PWC 28 464 210 28 48 33 948 230 408 706 280 1000 256 227 610 246 24 M20x80 752 132 265 360 80 70 70
PWC 31 532 210 28 48 33 1085 299 408 773 315 1137 325 262 680 239 24 M20x110 889 201 402 360 90 70 70

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1
78
 900-2221-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension (900-1200-…)

4) Backstop, see 900-1254-MB1

K PWC 22 – R1 1 – V 11 – 25 – Z 3 Example

[z] Add. cooling

[0] Without add. cooling
[3] Cooling coil
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Foot mounted
[3] Wall mounted
[4] Wall mounted
➝
➝

[R1] Horizontal gear unit

Size
➝

Bevel-helical gear unit, EP-Series, [WC] 3 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate
5) see dimension sheet 900-0220-MB9
79
 900-2221-MB 3/1
Dimensions 3.99

Type PWC 35-R1 … PWC 67-R1

Add. lubrication required, please check-back

Solid shaft
Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft d1, d2 75...85 ≥ 100

Type ∅ d1 Weight Oil filling
∅ d2 Tapped centre holes in shaft ends
m6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [I]
DIN 332 Form DS M 20 M 24
PWC 35 75 644 160 484 285 155 570 290 280 328 1500 55
PWC 40 75 644 160 484 285 175 570 290 280 348 1830 75
Keys to DIN 6885/1 supplied by ELECON
PWC 42 85 762 180 582 350 195 650 330 320 400 2200 90
PWC 45 85 762 180 582 350 210 730 410 320 440 2750 130
Type of protection as per IP 55
PWC 47 85 762 180 582 350 230 730 410 320 440 3300 175
PWC 50 100 935 215 720 440 250 795 410 385 480 4350 180
PWC 53 100 935 215 720 440 250 795 410 385 480 4950 250
PWC 56 100 935 215 720 440 270 845 460 385 540 5450 350
PWC 60 130 1081 250 831 540 290 920 460 460 540 7400 360
PWC 63 130 1081 250 831 540 310 970 510 460 580 8400 460
PWC 67 130 1081 250 831 540 310 970 510 460 580 9450 570

∅ h Fitting
Type a b6 c c 6 e e8 f g nc n6 o p p2 t t1 t2 t3 u v w2v w2H
d H9 -0.2
∅s ds x Imax
PWC 35 570 225 32 55 40 1275 325 438 925 300 1346 345 255 610 262 24 M20x85 1005 190 325 695 396 190 82 87
PWC 40 647 225 32 55 40 1430 403 438 1002 375 1501 423 330 760 262 24 M20x120 1157 265 477 847 396 220 82 87
PWC 42 693 265 40 62 45 1555 392 514 1134 355 1652 422 305 720 303 28 M24x100 1230 225 390 820 460 250 90 85
PWC 45 759 265 40 62 45 1689 460 514 1200 425 1786 490 375 860 303 28 M24x120 1356 285 516 946 460 250 90 90
PWC 47 845 265 40 62 52 1860 545 514 1285 500 1957 575 440 1010 303 28 M24x250 1527 370 687 1117 460 250 90 100
PWC 50 857 320 50 75 60 1892 470 620 1392 425 1962 505 360 860 358 35 M30x120 1524 280 504 1014 560 250 105 110
PWC 53 928 320 50 75 60 2038 545 620 1463 500 2108 580 435 1010 358 35 M30x180 1670 355 650 1160 560 250 105 110
PWC 56 1021 320 50 75 60 2231 645 620 1556 600 2301 680 535 1210 365 35 M30x250 1858 450 838 1348 560 250 105 110
PWC 60 1032 395 60 90 65 2272 565 770 1669 530 2342 600 460 1070 440 42 M36x150 1840 345 630 1200 690 350 115 120
PWC 63 1105 395 60 90 65 2420 640 770 1742 600 2490 675 530 1210 440 42 M36x200 1988 420 778 1348 690 350 115 120
PWC 67 1176 395 60 90 70 2566 715 770 1806 670 2636 750 590 1350 440 42 M36x250 2134 495 924 1494 690 350 115 120

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

80
 900-2221-MB4/1
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension

4) Backstop, see 900-1254-MB1

K PWC 35 – R1 1 – V 11 – 25 – Z 3 Example

[z] Add. cooling

[0] Without add. cooling
[3] Cooling coil
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
*) [H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement
[0] Shaft mount. with torque arm
[1] Foot mounted
➝

[R1] Horizontal gear unit

➝

Size
➝

Bevel-helical gear unit, EP-Series, [WC] 3 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate
*) Only types PWC35 and PWC40
81
 900-2321-MB 1
Dimensions 3.99

Type PWD 14-R1 … PWD 31-R1

Add. lubrication required, please check-back

Solid shaft
Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Type ∅ d1 ∅ d2 Weight Oil filling DIN 332 Form DS
k6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [I]
d1, d2
PWD 14 20 319 80 239 132 65 270 135 135 - 105 9
20 25 40 65...85 > 85
PWD 16 20 319 80 239 132 85 290 145 145 - 170 10
M6 M 10 M 16 M 20 M 24
PWD 18 25 378 85 293 148 95 350 170 180 - 245 22
PWD 20 25 387 85 302 148 120 370 190 180 - 335 27 Keys to DIN 6885/1 supplied by ELECON
PWD 22 40 497 120 377 190 130 405 190 215 - 465 41
PWD 25 40 482 120 362 190 145 450 230 220 296 600 51 Type of protection as per IP 55
PWD 28 40 497 120 377 190 160 480 230 250 328 770 71
PWD 31 40 497 120 377 190 175 540 290 250 348 1060 93

∅ h Fitting
Type a b6 c c6 e e8 f g n n6 o p p2 t t1 t2 u v w2v w2H
d H9 -0.2 ∅ s ds x Imax
PWD 14 262 113 15 27 16 474 121 216 344 150 500 134 121 333 - 12 M10x45 348 58 125 192 - 39 27
PWD 16 318 113 15 27 16 579 170 216 400 180 605 183 151 393 - 12 M10x80 453 107 217 192 20 49 27
PWD 18 366 147 18 32 22 622 155 284 458 190 654 171 155 419 - 14.5 M12x55 486 87 175 248 - 56 33
PWD 20 410 147 18 32 22 732 211 284 511 225 764 227 190 489 - 14.5 M12x90 596 143 285 248 - 56 33
PWD 22 464 179 24 41 26 782 193 346 580 235 826 215 190 513 - 18.5 M16x65 622 113 226 306 - 62 36
PWD 25 535 179 24 41 26 896 249 346 638 265 940 271 220 573 204 18.5 M16x90 736 169 340 306 - 67 62
PWD 28 585 210 28 48 33 948 230 408 706 280 1000 256 227 610 246 24 M20x80 752 132 265 360 - 70 70
PWD 31 653 210 28 48 33 1085 299 408 773 315 1137 325 262 680 239 24 M20x110 889 201 402 360 - 70 70

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

82
 900-2321-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension (900-1200-…)

4) Backstop, see 900-1254-MB1

K PWD 22 – R1 1 – V 11 – 250 – Z 3 Example

[z] Add. cooling

[0] Without add. cooling
[3] Cooling coil
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Foot mounted
[3] Wall mounted
[4] Wall mounted
➝

[R1] Horizontal gear unit

➝

Size
➝

Bevel-helical gear unit, EP-Series, [WD] 4 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate
5) See dimension sheet 900-0220-MB9
83
 900-2321-MB 3/1
Dimensions 3.99

Type PWD 35-R1 … PWD 67-R1

Add. lubrication required, please check-back

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft d1, d2 50 60…85 ≥ 155

Type Weight Oil filling
∅ d1 ∅ d2 Tapped centre holes in shaft ends
m6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [I]
DIN 332 Form DS M 16 M 20 M 24
PWD 35 50k6 517 120 397 285 155 570 290 280 328 1500 60
PWD 40 50k6 593 120 473 285 175 570 290 280 348 1830 80
PWD 42 60 662 145 517 265 195 650 330 320 400 2200 100 Keys to DIN 6885/1 supplied by ELECON
PWD 45 60 666 145 521 265 210 730 410 320 440 2750 140
PWD 47 60 707 145 562 265 230 730 410 320 440 3300 190 Type of protection as per IP 55
PWD 50 75 769 160 609 285 250 795 410 385 480 4200 200
PWD 53 75 769 160 609 285 250 795 410 385 480 4800 260
PWD 56 75 844 160 684 285 270 845 460 385 540 5850 360
PWD 60 85 937 180 757 350 290 920 460 460 540 7350 380
PWD 63 85 937 180 757 350 310 970 510 460 580 8350 480
PWD 67 85 932 180 752 350 310 970 510 460 580 9400 580

∅ h Fitting
Type a b6 c c6 e e8 f g nc n6 o p p2 t t1 t2 t3 u v w2v w2H
d H9 -0.2 ∅ s ds x Imax
PWD 35 726 225 32 55 40 1275 325 438 925 300 1346 345 255 610 262 24 M20x85 1005 190 325 695 396 190 82 87
PWD 40 736 225 32 55 40 1430 403 438 1002 375 1501 423 330 760 262 24 M20x120 1157 265 477 847 396 220 82 87
PWD 42 837 265 40 62 45 1555 392 514 1134 355 1652 422 305 720 303 28 M24x100 1230 225 390 820 460 250 90 85
PWD 45 899 265 40 62 45 1689 460 514 1200 425 1786 490 375 860 303 28 M24x120 1356 285 516 946 460 250 90 90
PWD 47 924 265 40 62 52 1860 545 514 1285 500 1957 575 440 1010 303 28 M24x250 1527 370 687 1117 460 250 90 100
PWD 50 1070 320 50 75 60 1892 470 620 1392 425 1962 505 360 860 358 35 M30x120 1524 280 504 1014 560 250 105 110
PWD 53 1141 320 50 75 60 2038 545 620 1463 500 2108 580 435 1010 358 35 M30x180 1670 355 650 1160 560 250 105 110
PWD 56 1166 320 50 75 60 2231 645 620 1556 600 2301 680 535 1210 365 35 M30x250 1858 450 838 1348 560 250 105 110
PWD 60 1278 395 60 90 65 2272 565 770 1669 530 2342 600 460 1070 440 42 M36x150 1840 345 630 1200 690 350 115 120
PWD 63 1351 395 60 90 65 2420 640 770 1742 600 2490 675 530 1210 440 42 M36x200 1988 420 778 1348 690 350 115 120
PWD 67 1426 395 60 90 65 2566 715 770 1806 670 2636 750 590 1350 440 42 M36x250 2134 495 924 1494 690 350 115 120

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

84
 900-2321-MB4/1
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension

4) Backstop, see 900-1254-MB1

K PWD 35 – R1 1 – V 11 – 250 – Z 3 Example

[z] Add. cooling

[0] Without add. cooling
[3] Cooling coil
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
*) [H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement
[0] Shaft mount. with torque arm
[1] Foot mounted
➝

[R1] Horizontal gear unit

➝

Size
➝

Bevel-helical gear unit, EP-Series, [WD] 4 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate
*) Only types PWD35 and PWD40
85
 900-2225-MB 1
Dimensions 3.99

Type PWC 14-S5 … PWC 31-S5

Hollow shaft
Solid shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Type Weight Oil filling DIN 332 Form DS
∅ d1 ∅ d2
k6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [I]
d1, d2
PWC 14 25 312 85 227 148 65 270 135 135 - 115 10
25 40...50 60...85 > 85
PWC 16 25 312 85 227 148 85 290 145 145 - 170 16
M 10 M 16 M 20 M 24
PWC 18 40 406 120 286 190 95 350 170 180 - 245 24
PWC 20 40 406 120 286 190 120 370 190 180 - 335 33 Keys to DIN 6885/1 supplied by ELECON
PWC 22 50 447 120 327 225 130 405 190 215 - 460 44
PWC 25 50 447 120 327 225 145 450 230 220 296 595 59 Type of protection as per IP 55
PWC 28 60m6 522 145 377 255 160 480 230 250 328 775 74
PWC 31 60m6 522 145 377 255 175 540 290 250 348 1065 107

∅ h h2 Fitting
Type b6 c6 c7 e7 f7 g h1 h7 n2 o p2 p7 t7 u7 w1s w2sv w2SH
d H9 -0.2 -0.2 ∅ s7 ds x Imax

PWC 14 113 27 51 16 274 216 344 150 350 134 195 500 121 - 535 14.5 M12x90 206 194 124 38 26
PWC 16 113 27 51 16 334 216 400 180 455 183 225 605 151 - 640 14.5 M12x90 266 194 94 48 26
PWC 18 147 32 62 22 348 284 458 190 464 171 245 654 155 - 690 16.5 M14x100 260 258 156 51 28
PWC 20 147 32 62 22 414 284 511 225 574 227 280 764 190 - 795 16.5 M14x100 330 258 121 51 28
PWC 22 179 41 76 26 426 346 580 235 591 215 305 826 190 - 865 24 M20x130 326 312 164 59 33
PWC 25 179 41 77 26 486 346 638 265 705 271 335 940 220 204 980 24 M20x130 384 312 135 64 59
PWC 28 210 48 86 33 504 408 706 280 720 256 360 1000 227 246 1030 28 M24x150 386 366 184 67 67
PWC 31 210 48 95 33 574 408 773 315 857 325 395 1137 262 239 1165 28 M24x160 456 366 149 67 67

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

86
 900-2225-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension (900-1200-…)

4) Backstop, see 900-1254-MB1

K PWC 22 – S5 1 – V 51 – 25 – Z 1 Example

[z] Add. cooling

[0] Without add. cooling
[1] Fan
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Wall mounted
[3] Wall mounted
[4] Wall mounted
[5] Foot mounted
➝
➝

[S5] Vertical mounting gear unit with right angle shafts, high speed shaft above
Size
➝

Bevel-helical gear unit, EP-Series, [WC] 3 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate
5) See dimension sheet 900-0220-MB9
87
 900-2325-MB 1
Dimensions 3.99

Type PWD 14-S5 … PWD 31-S5

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Type ∅ d1 Weight Oil filling DIN 332 Form DS
∅ d2
k6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [I]
d1, d2
PWD 14 20 319 80 239 132 65 270 135 135 - 105 12
20 25 40 65...85 > 85
PWD 16 20 319 80 239 132 85 290 145 145 - 170 18
M6 M 10 M 16 M 20 M 24
PWD 18 25 378 85 293 148 95 350 170 180 - 245 30
PWD 20 25 387 85 302 148 120 370 190 180 - 335 38 Keys to DIN 6885/1 supplied by ELECON
PWD 22 40 497 120 377 190 130 405 190 215 - 465 54
PWD 25 40 482 120 362 190 145 450 230 220 296 600 72 Type of protection as per IP 55
PWD 28 40 497 120 377 190 160 480 230 250 328 770 91
PWD 31 40 497 120 377 190 175 540 290 250 348 1060 130

∅ h h2 Fitting
Type b6 c6 c7 e7 f7 g h1 h7 n2 o p2 p7 t7 u7 w1s w2Sv w2SH
d H9 -0.2 -0.2 ∅ s7 ds x lmax

PWD 14 113 27 51 16 274 216 344 150 396 134 195 500 121 - 535 14.5 M12x90 206 194 136 38 26
PWD 16 113 27 51 16 334 216 400 180 501 183 225 605 151 - 640 14.5 M12x90 266 194 106 48 26
PWD 18 147 32 62 22 348 284 458 190 537 171 245 654 155 - 690 16.5 M14x100 260 258 163 51 28
PWD 20 147 32 62 22 414 284 511 225 637 227 280 764 190 - 795 16.5 M14x100 330 258 137 51 28
PWD 22 179 41 76 26 426 346 580 235 679 215 305 826 190 - 865 24 M20x130 326 312 214 59 33
PWD 25 179 41 77 26 486 346 638 265 806 271 335 940 220 204 980 24 M20x130 384 312 170 64 59
PWD 28 210 48 86 33 504 408 706 280 841 256 360 1000 227 246 1030 28 M24x150 386 366 184 67 67
PWD 31 210 48 95 33 574 408 773 315 978 325 395 1137 262 239 1165 28 M24x160 456 366 149 67 67

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

88
 900-2325-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension (900-1200-…)

4) Backstop, see 900-1254-MB1

K PWD 22 – S5 5 – V 51 – 250 – Z 0 Example

[z] Add. cooling

[0] Without add. cooling
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Wall mounted
[3] Wall mounted
[4] Wall mounted
[5] Foot mounted
➝
➝

[S5] Vertical mounting gear unit with right angle shafts, high speed shaft above
Size
➝

Bevel-helical gear unit, EP-Series, [WD] 4 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate
5) See dimension sheet 900-0220-MB9
89
 900-2226-MB 1
Dimensions 3.99

Type PWC 14-T6 … PWC 31-T6

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Type Weight Oil filling
∅ d1 ∅ d2 DIN 332 Form DS
k6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [I]
d1, d2
PWC 14 25 312 85 227 148 65 270 135 135 - 115 9
25 40…50 60...85 > 85
PWC 16 25 312 85 227 148 85 290 145 145 - 170 14
M 10 M 16 M 20 M 24
PWC 18 40 406 120 286 190 95 350 170 180 - 245 23
PWC 20 40 406 120 286 190 120 370 190 180 - 335 29 Keys to DIN 6885/1 supplied by ELECON
PWC 22 50 447 120 327 225 130 405 190 215 - 460 45
PWC 25 50 447 120 327 225 145 450 230 220 296 595 54 Type of protection as per IP 55
PWC 28 60m6 522 145 377 255 160 480 230 250 328 775 75
PWC 31 60m6 522 145 377 255 175 540 290 250 348 1065 97

∅ h h1 Fitting
Type b6 c6 c8 e7 f7 g h2 h7 h8 n2 o p2 p7 t7 u7 w1s w2sv w2SH
d H9 -0.2 -0.2
∅ s8 ds x lmax
PWC 14 113 27 57 16 274 216 344 150 150 366 195 183 500 121 - 535 14.5 M12x90 206 194 124 38 26
PWC 16 113 27 57 16 334 216 400 180 150 422 225 213 605 151 - 640 14.5 M12x90 266 194 94 48 26
PWC 18 147 32 64 22 348 284 458 190 190 483 245 229 654 155 - 690 16.5 M14x100 260 258 156 51 28
PWC 20 147 32 64 22 414 284 511 225 190 537 280 264 764 190 - 795 16.5 M14x100 330 258 121 51 28
PWC 22 179 41 76 26 426 346 580 235 235 611 305 278 826 190 - 865 24 M20x130 326 312 164 59 33
PWC 25 179 41 77 26 486 346 638 265 235 669 335 308 940 220 204 980 24 M20x130 384 312 135 64 59
PWC 28 210 48 92 33 504 408 706 280 280 744 360 330 1000 227 246 1030 28 M24x150 386 366 184 67 67
PWC 31 210 48 95 33 574 408 773 315 280 812 395 365 1137 262 239 1165 28 M24x160 456 366 149 67 67

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

90
 900-2226-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension (900-1200-…)

4) Backstop, see 900-1254-MB1

K PWC 22 – T6 6 – V 51 – 25 – Z 1 Example

[z] Add. cooling

[0] Without add. cooling
[1] 1 Fan
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Wall mounted
[3] Wall mounted
[4] Wall mounted
➝

[6] Foot mounted

➝

[T6] Vertical mounting gear unit with right angle shafts, high speed shaft below
Size
➝

Bevel-helical gear unit, EP-Series, [WC] 3 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate
5) See dimension sheet 900-0220-MB9
91
 900-2326-MB 1
Dimensions 3.99

Type PWD 14-T6 … PWD 31-T6

Solid shaft Hollow shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Type Weight Oil filling
∅ d1 ∅ d2 DIN 332 Form DS
k6 k1 l1 m1 ∅ x1 m6 k2 l2 m2 ∅ x2 [kg] [I]
d1, d2
PWD 14 20 319 80 239 132 65 270 135 135 - 105 9
20 25 40 65...85 > 85
PWD 16 20 319 80 239 132 85 290 145 145 - 170 14
M6 M 10 M 16 M 20 M 24
PWD 18 25 378 85 293 148 95 350 170 180 - 245 23
PWD 20 25 387 85 302 148 120 370 190 180 - 335 30 Keys to DIN 6885/1 supplied by ELECON
PWD 22 40 497 120 377 190 130 405 190 215 - 465 45
PWD 25 40 482 120 362 190 145 450 230 220 296 600 55 Type of protection as per IP 55
PWD 28 40 497 120 377 190 160 480 230 250 328 770 76
PWD 31 40 497 120 377 190 175 540 290 250 348 1060 99

∅ h h1 Fitting
Type b6 c6 c8 e7 f7 g h2 h7 h8 n2 o p2 p7 t7 u7 w1s w2sv w2SH
d H9 -0.2 -0.2
∅ s8 ds x lmax
PWD 14 113 27 57 16 274 216 344 150 104 366 195 183 500 121 - 535 14.5 M12x90 206 194 136 38 26
PWD 16 113 27 57 16 334 216 400 180 104 422 225 213 605 151 - 640 14.5 M12x90 266 194 106 48 26
PWD 18 147 32 64 22 348 284 458 190 117 483 245 229 654 155 - 690 16.5 M14x100 260 258 163 51 28
PWD 20 147 32 64 22 414 284 511 225 127 537 280 264 764 190 - 795 16.5 M14x100 330 258 137 51 28
PWD 22 179 41 76 26 426 346 580 235 147 611 305 278 826 190 - 865 24 M20x130 326 312 214 59 33
PWD 25 179 41 77 26 486 346 638 265 134 669 335 308 940 220 204 980 24 M20x130 384 312 170 64 59
PWD 28 210 48 92 33 504 408 706 280 159 744 360 330 1000 227 246 1030 28 M24x150 386 366 184 67 67
PWD 31 210 48 95 33 574 408 773 315 159 812 395 365 1137 262 239 1165 28 M24x160 456 366 149 67 67

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

92
 900-2326-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

3) Add. shaft extension (900-1200-…)

4) Backstop, see 900-1254-MB1

K PWD 22 – T6 6 – V 51 – 250 – Z 0 Example

[z] Add. cooling

[0] Without add. cooling
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 5)
[0] Shaft mount. with torque arm
[1] Wall mounted
[3] Wall mounted
[4] Wall mounted
[6] Foot mounted
➝
➝

[T6] Vertical mounting gear unit with right angle shafts, high speed shaft below
Size
➝

Bevel-helical gear unit, EP-Series, [WD] 4 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate
5) See dimension sheet 900-0220-MB9
93
 900-2224-MB 1
Dimensions 3.99

Type PWC 14-U4 … PWC 31-U4

Add. lubrication required, please check-back

Solid shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Weight Oil filling DIN 332 Form DS
Type ∅ d2 [kg] [I]
∅ d1 k1 l1 m1 ∅ x1 y1 m6 k2 l2 m2 ∅ x2 y2
d1, d2
PWC 14 25 k6 312 85 227 148 100 65 270 135 135 - 210 125 10 25 40...50 60...85 > 85
PWC 16 25 k6 312 85 227 148 100 85 290 145 145 - 270 180 15
M 10 M 16 M 20 M 24
PWC 18 40 k6 406 120 286 190 100 95 350 170 180 - 270 255 26
PWC 20 40 k6 406 120 286 190 100 120 370 190 180 - 340 345 34 Keys to DIN 6885/1 supplied by ELECON
PWC 22 50 m6 447 120 327 225 100 130 405 190 215 - 330 470 48
PWC 25 50 m6 447 120 327 225 100 145 450 230 220 - 390 605 52 Type of protection as per IP 55
PWC 28 60 m6 522 145 377 255 100 160 480 230 250 - 400 785 82
PWC 31 60 m6 522 145 377 255 100 175 540 290 250 - 470 1075 93

Fitting
b6 ∅ h
Type a -0.2 c6 e5 e6 f6 g g6 -0.2 n n6 o p p2 p6 ∅d H9 dsx lmax w1U x6
d H9
3)
PWC 14 216 113 27 16 357 126 274 344 113 150 500 134 121 333 - 270 16 M14x65 106 130
PWC 16 272 113 27 16 413 175 334 400 162 180 605 183 151 313 - 270 16 M14x65 76 130
PWC 18 293 147 32 22 475 162 348 458 145 190 654 171 155 419 - 340 22 M20x80 131 130
PWC 20 347 147 32 22 528 218 418 511 201 225 764 227 190 489 - 340 22 M20x80 96 130
PWC 22 376 179 41 26 600 200 426 580 180 235 826 215 190 513 - 416 26 M24x100 137 130
PWC 25 434 179 41 26 658 256 486 638 236 265 940 271 220 573 204 416 26 M24x100 107 130
PWC 28 464 210 48 33 731 245 508 706 221 280 1000 256 227 610 246 480 33 M30x120 150 130
PWC 31 532 210 48 33 798 307 578 773 282 315 1137 325 262 680 239 480 33 M30x120 115 130
1) Dimensions of hollow shaft and machine shaft on request
2) Torque arms see dimensions 900-0253-MB1
3) Holding down bolts of min. property class 10.9
4) Available for shaft d1: n ≥ 1000 min–1; lower speed on request.

94
 900-2224-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

5) Add. shaft extension (900-1200-…)

6) Backstop, see 900-1254-MB1

K PWC 22 – U4 4 – V 51 – 25 – Z 3 Example

[z] Add. cooling

[0] Without add. cooling
[1] 1 Fan
[3] Cooling coil 7)
[4] 1 Fan + Cooling coil 7)
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 8)
[0] Shaft mount. with torque arm
[1] Wall mounted
[4] Foot mounted
➝

[U4] Vertical gear unit

➝

Size
➝

Bevel-helical gear unit, EP-Series, [WC] 3 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate
7) Only location of shafts : .2, .4 and .6
8) See dimension sheet 900-0220-MB9
95
 900-2224-MB 3/2
Dimensions 3.99

Type PWC 35-U4 … PWC 67-U4

Add. lubrication required, please check-back

Hollow shaft

Solid shaft Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft d1, d2 75...85 ≥ 100

Weight Oil filling
Type ∅ d1 ∅ d2 [kg] [I] Tapped centre holes in shaft ends
m6 k1 l1 m1 ∅ x1 y1 m6 k2 l2 m2 ∅ x2 y2 DIN 332 Form DS M 20 M 24
PWC 35 75 644 160 484 285 100 155 570 290 280 328 440 1530 95
PWC 40 75 644 160 484 285 100 175 570 290 280 348 590 1860 130
PWC 42 85 762 180 582 350 100 195 650 330 320 400 530 2230 155 Keys to DIN 6885/1 supplied by ELECON
PWC 45 85 762 180 582 350 100 210 730 410 320 440 670 2780 225
PWC 47 85 762 180 582 350 100 230 730 410 320 440 780 3330 305 Type of protection as per IP 55
PWC 50 100 935 215 720 440 100 250 795 410 385 480 590 4300 290
PWC 53 100 935 215 720 440 100 250 795 410 385 480 740 4900 400
PWC 56 100 935 215 720 440 100 270 845 460 385 540 940 5600 550
PWC 60
PWC 63
PWC 67

Type a b6 c6 ∅ e5 e6 f6 g g6 h nc n6 o p p2 p6
Fitting
w1U
-0.2 d H9 -0.2 ∅d H9 dsx lmax
3)
PWC 35 570 225 55 40 970 345 578 925 305 300 1346 345 255 610 262 510 40 M36x330 229
PWC 40 647 225 55 40 1047 423 728 1002 382 375 1501 423 330 760 262 510 40 M36x330 154
PWC 42 693 265 62 45 1193 422 680 1134 372 355 1652 422 305 720 303 590 45 M42x400 277
PWC 45 759 265 62 45 1259 490 820 1200 440 425 1786 490 375 860 303 590 45 M42x400 207
PWC 47 845 265 62 52 1345 575 970 1285 525 500 1957 575 440 1010 303 590 52 M48x400 142
PWC 50 857 320 75 60 1457 505 820 1392 450 425 1962 505 360 910 358 710 60 M56x400 360
PWC 53 928 320 75 60 1528 580 970 1463 525 500 2108 580 435 1060 358 710 60 M56x400 285
PWC 56 1021 320 75 60 1621 680 1170 1556 625 600 2301 680 535 1260 365 715 60 M56x400 185
PWC 60
PWC 63
PWC 67

1) Dimensions of hollow shaft and machine shaft on request

2) Torque arms see dimensions 900-0253-MB1
3) Holding down bolts of min. property class 10.9
4) Available for shaft d1 : n ≥ 1000 min–1, lower speed on request
96
 900-2224-MB4/1
Location of input and output shafts 3.99

Directions of rotation viewing ➪

5) Add. shaft extension

6) Backstop, see 900-1254-MB1

K PWC 35 – U4 4 – V 51 – 25 – Z 3 Example

[z] Add. cooling

[0] Without add. cooling
[1] 1 Fan
[3] Cooling coil 7)
[4] 1 Fan + Cooling coil 7)
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
*) [H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement
[0] Shaft mount. with torque arm
[1] Wall mounted
[4] Foot mounted
➝

[U4] Vertical gear unit

➝

Size
➝

Bevel-helical gear unit, EP-Series, [WC] 3 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate
7) Only location of shafts : .2, .4 and .6
*) Only types PWC35 and PWC40
97
 900-2324-MB 1
Dimensions 3.99

Type PWD 14-U4 … PWD 31-U4

Add. lubrication required, please check-back

Hollow shaft

Solid shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft Tapped centre holes in shaft ends

Weight Oil filling
∅ d1 ∅ d2 [kg] DIN 332 Form DS
Type [I]
k6 k1 l1 m1 ∅ x1 y1 m6 k2 l2 m2 ∅ x2 y2
d1, d2
PWD 14 20 319 80 239 132 100 65 270 135 135 - 210 115 11
20 25 40 65...85 > 85
PWD 16 20 319 80 239 132 100 85 290 145 145 - 270 180 16
PWD 18 25 378 85 293 148 100 95 350 170 180 - 270 255 25 M6 M 10 M 16 M 20 M 24
PWD 20 25 387 85 302 148 100 120 370 190 180 - 340 345 34
PWD 22 40 497 120 377 190 100 130 405 190 215 - 330 475 49 Keys to DIN 6885/1 supplied by ELECON
PWD 25 40 482 120 362 190 100 145 450 230 220 - 390 610 53
Type of protection as per IP 55
PWD 28 40 497 120 377 190 100 160 480 230 250 - 400 780 83
PWD 31 40 497 120 377 190 100 175 540 290 250 - 470 1070 95

Fitting
b6 ∅ h
Type a -0.2 c6 d H9 e5 e6 f6 g g6 -0.2 n n6 o p p2 p6 ∅ d H9 dsx lmax w1U x6
3)
PWD 14 262 113 27 16 357 126 274 344 113 150 500 134 121 333 - 270 16 M14x65 118 130
PWD 16 318 113 27 16 413 175 334 400 162 180 605 183 151 393 - 270 16 M14x65 88 130
PWD 18 366 147 32 22 475 162 348 458 145 190 654 171 155 419 - 340 22 M20x80 138 130
PWD 20 410 147 32 22 528 218 418 511 201 225 764 227 190 489 - 340 22 M20x80 112 130
PWD 22 464 179 41 26 600 200 426 580 180 235 826 215 190 513 - 416 26 M24x100 187 130
PWD 25 535 179 41 26 658 256 486 638 236 265 940 271 220 573 204 416 26 M24x100 142 130
PWD 28 585 210 48 33 731 245 508 706 221 280 1000 256 227 610 246 480 33 M30x120 150 130
PWD 31 653 210 48 33 798 307 578 773 282 315 1137 325 262 680 239 480 33 M30x120 115 130

1) Dimensions of hollow shaft and machine shaft on request

2) Torque arms see dimensions 900-0253-MB1
3) Holding down bolts of min. property class 10.9
4) Available for shaft d1:n ≥ 1000 min–1, lower speed on request

98
 900-2324-MB2
Location of input and output shafts 3.99

Directions of rotation viewing ➪

5) Add. shaft extension (900-1200-…)

6) Backstop, see 900-1254-MB1

K PWD 22 – U4 4 – V 51 – 250 – Z 3 Example

[z] Add. cooling

[0] Without add. cooling
[3] Cooling coil 7)
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
[H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement 8)
[0] Shaft mount. with torque arm
[1] Wall mounted
[4] Foot mounted
➝

[U4] Vertical gear unit

➝

Size
➝

Bevel-helical gear unit, EP-Series, [WD] 4 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate
7) Only location of shafts : .2, .4 and .6
8) See dimension sheet 900-0220-MB9
99
 900-2324-MB 3/2
Dimensions 3.99

Type PWD 35-U4 … PWD 67-U4

Add. lubrication required, please check-back

Hollow shaft

Solid shaft

Filling Plug yellow

Oil Level blue
Oil Drain red
Breather

Input shaft Output shaft d1, d2 50 60...85 ≥ 155

Weight Oil filling
Type ∅ d1 ∅ d2 [kg] [I] Tapped centre holes in shaft ends
m6 k1 l1 m1 ∅ x1 y1 m6 k2 l2 m2 ∅ x2 y2 DIN 332 Form DS
M 16 M 20 M 24
PWD 35 50 k6 517 120 397 285 100 155 570 290 280 328 440 1530 100
PWD 40 50 k6 593 120 473 285 100 175 570 290 280 348 590 1860 135
PWD 42 60 662 145 517 265 100 195 650 330 320 400 530 2230 170
PWD 45 60 666 145 521 265 100 210 730 410 320 440 670 2780 240 Keys to DIN 6885/1 supplied by ELECON
PWD 47 60 707 145 562 265 100 230 730 410 320 440 780 3330 325
PWD 50 75 769 160 609 285 100 250 795 410 385 480 590 4300 290 Type of protection as per IP 55
PWD 53 75 769 160 609 285 100 250 795 410 385 480 740 4900 400
PWD 56 75 844 160 684 285 100 270 845 460 385 540 940 5600 550
PWD 60
PWD 63
PWD 67

Type b6 ∅ h Fitting
a -0.2 c6 e5 e6 f6 g g6 -0.2 nc n6 o p p2 p6 w1U
d H9 ∅ d H9 dsx lmax
PWD 35 726 225 55 40 970 345 578 925 305 300 1346 345 255 610 262 510 40 M36x330 142
PWD 40 736 225 55 40 1047 423 728 1002 382 375 1501 423 330 760 262 510 40 M36x330 143
PWD 42 837 265 62 45 1193 422 680 1134 372 355 1652 422 305 720 303 590 45 M42x400 212
PWD 45 899 265 62 45 1259 490 820 1200 440 425 1786 490 375 860 303 590 45 M42x400 146
PWD 47 924 265 62 52 1345 575 970 1285 525 500 1957 575 440 1010 303 590 52 M48x400 122
PWD 50 1070 320 75 60 1457 505 820 1392 450 425 1962 505 360 910 358 710 60 M56x400 249
PWD 53 1141 320 75 60 1528 580 970 1463 525 500 2108 580 435 1060 358 710 60 M56x400 174
PWD 56 1166 320 75 60 1621 680 1170 1556 625 600 2301 680 535 1260 365 715 60 M56x400 149
PWD 60
PWD 63
PWD 67

1) Hollow shaft and machine shaft see dimensions 900-0212-MB 1 and 900-0213-MB1
2) Torque arms see dimensions 900-0253-MB1

100
 900-2324-MB4/1
Location of input and output shafts 3.99

Directions of rotation viewing ➪

5) Add. shaft extension

6) Backstop, see 900-1254-MB1

K PWD 35 – U4 4 – V 51 – 250 – Z 3 Example

[z] Add. cooling

[0] Without add. cooling
[3] Cooling coil 7)
➝

Nominal ratio
➝

Location of shafts
Permissible direction of rotation
➝

Output shaft
[V] Solid shaft
[G] Hollow shaft with shrink disc
*) [H] Hollow shaft with key-way
[F] Flange shaft
➝

Mounting arrangement
[0] Shaft mount. with torque arm
[1] Wall mounted
[4] Foot mounted
➝
➝

[U4] Vertical gear unit

Size
➝

Bevel-helical gear unit, EP-Series, [WD] 4 stage

➝

Motor attachment
[K] Motor bell housing
[M] Adjustable motor base
[J] Motor bracket, base plate
7) Only location of shafts : .2, .4 and .6
*) Only types PWD35 and PWD40
101
Exact ratios

Helical Gear Units, one-stage

Type PB

Gearbox Size

iN 10 12 16 20 25 31 40 45
1.25 1.25 1.26 1.26 1.26 1.27 1.25
1.4 1.40 1.41 1.41 1.41 1.43 1.40
1.6 1.57 1.59 1.59 1.59 1.62 1.57
1.8 1.77 1.80 1.80 1.80 1.83 1.77
2 2.00 2.00 2.00 2.00 2.00 2.00
2.24 2.27 2.29 2.29 2.29 2.29 2.27
2.5 2.48 2.50 2.50 2.50 2.45 2.48
2.8 2.79 2.83 2.83 2.83 2.78 2.79
3.15 3.18 3.12 3.12 3.12 3.19 3.18
3.55 3.50 3.60 3.60 3.60 3.47 3.50
4 4.07 4.00 4.00 4.00 4.08 4.07 4.07 4.07
4.5 4,54 4.46 4.46 4.46 4.58 4.54 4.54 4.54
5 5.07 5.06 5.00 5.07 5.07 4.94 5.00 5.07
5.6 5.57 5.60 5.50 5.69 5.69 5.63 5.50 5.69

Helical Gear Units, two-stage

Type PC
Gearbox Size

iN 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
4 3.98 4.00 3.95 4.03 3.97 3.92
4.5 4.46 4.49 4.44 4.52 4.48 4.39
5 5.01 5.06 5.01 5.10 5.06 5.24 4.92 4.83
5.6 5.64 5.72 5.77 5.66 5.39 5.76 5.45 5.74 5.90 5.54 5.41
6.3 6.38 6.48 6.35 6.49 6.29 6.06 6.40 6.13 6.27 6.68 6.27 6.08 6.00
7.1 7.24 7.26 7.26 7.31 7.18 6.83 7.31 6.90 7.16 7.58 7.12 6.84 6.72
8 7.89 8.15 7.94 8.26 7.86 7.71 8.00 7.80 7.68 8.27 7.76 7.73 7.54
9 8.89 9.18 9.00 9.18 8.91 8.57 9.07 8.67 8.70 9.45 8.74 8.79 8.49
10 10.1 10.4 9.90 10.5 9.80 9.80 9.98 9.90 9.99 10.1 9.95 9.58 9.60
11.2 11.2 11.8 11.4 11.5 11.3 10.7 11.5 10.8 10.9 11.5 11.0 10.8 10.9
12.5 13.0 12.9 12.7 13.0 12.6 12.1 12.8 12.3 12.8 13.2 12.8 12.3 11.9 12.7
14 14.5 14.5 14.2 14.3 14.0 13.4 14.3 13.5 14.4 14.3 14.2 13.5 13.4 14.2 15.3
16 16.2 16.5 16.1 16.5 15.7 15.4 16.2 15.6 15.9 16.9 15.5 15.7 15.3 15.6 17.0 18.6
18 17.8 18.2 17.8 18.4 17.3 17.1 18.2 17.3 17.8 18.9 17.6 17.6 16.8 17.2 18.8 20.7
20 21.1 20.5 19.1 19.3 21.0 19.1 19.5 20.6 22.8
22.4 23.5 23.2 21.4 22.0 23.5 21.8 21.8 25.1
25 26.3 25.7 23.6 24.7 23.7
28 28.9 27.0
iN = Nominal ratio
102
Exact ratios

Helical Gear Units, three-stage

Type PD
Gearbox Size

iN 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
16 15.9 16.1 16.1 16.1 16.1 16.0
18 17.7 18.0 18.1 17.9 18.0 17.8 18.7
20 20.8 20.1 19.6 20.4 20.0 21.2 19.5 19.8 19.8 19.3 19.9 20.8 21.4
22.4 23.2 22.5 22.9 21.9 23.0 21.8 23.0 23.8 23.0 22.1 23.3 21.6 23.5 22.6 23.2 23.8
25 25.8 25.1 25.6 24.5 26.7 25.7 24.3 25.9 26.4 25.6 24.1 24.6 26.0 23.8 26.2 25.2 26.4 26.6
28 28.4 28.5 29.0 27.0 29.8 29.2 27.7 28.6 30.3 27.9 28.3 27.4 28.7 28.0 28.9 28.1 29.4 30.3
31.5 32.1 33.8 31.5 32.5 31.4 33.4 32.8 31.2 32.1 34.1 31.7 31.6 29.9 31.5 31.2 34.1 31.6 32.9 33.7
35.5 35.8 37.7 35.1 36.2 35.1 36.8 35.7 34.8 35.9 37.7 35.6 34.4 35.2 34.8 34.4 38.0 35.2 36.9 37.7
40 40.0 42.1 39.8 41.1 39.3 42.9 40.6 39.6 39.7 42.4 38.7 39.2 39.2 38.3 37.8 41.8 39.4 41.2 42.3
45 43.9 46.2 44.0 45.5 43.2 47.8 45.5 44.4 44.6 47.4 44.1 43.9 42.7 42.1 41.7 46.0 44.2 46.1 47.2
50 51.9 52.3 51.7 50.7 49.3 53.6 51.2 48.3 51.1 52.4 51.0 47.8 48.6 51.9 45.9 50.7 51.9 51.7 52.7
56 57.9 58.2 57.7 57.5 55.0 58.9 57.1 54.9 57.4 58.8 56.9 54.4 54.5 57.8 50.5 55.9 57.9 60.8 59.2
63 64.6 65.0 65.5 63.6 61.7 67.3 64.9 61.7 63.6 67.4 62.0 63.0 59.3 63.7 62.3 61.5 64.7 67.8 69.6
71 71.0 71.5 72.4 74.7 67.8 75.0 72.9 69.3 71.3 75.8 70.5 70.2 67.5 70.1 69.4 75.7 72.6 75.7 77.6
80 84.5 79.0 83.3 84.1 80.0 77.3 79.0 83.9 80.9 76.5 78.2 80.7 76.4 84.4 80.0 85.0 86.7
90 94.2 89.6 94.6 92.5 90.9 87.9 87.4 94.1 88.2 87.0 87.1 88.9 84.1 93.0 89.4 93.6 97.3
100 105 99.1 105 102 98.7 98.1 104 100 99.9 94.9 97.8 96.9 102 100 105 107
112 116 114 108 115 109 108 107 118 117 120
125 129 123 129 124 124 117 130 135
140 143 138 135 143
160 154

Helical Gear Units, four-stage

Type PE
Gearbox Size

iN 14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
71 67.6 72.6 72.8 71.6 73.4 72.8
80 75.4 81.0 81.8 79.8 81.8 81.2 85.2
90 93.3 84.6 92.2 92.1 90.6 87.0 88.4 90.1 88.0 90.7 95.0
100 104 95.7 103 103 98.3 104 96.0 102 98.5 105 98.1 107 104 106 97.6
112 118 107 115 115 110 117 108 114 107 110 117 108 119 116 122 109
125 131 135 120 131 130 125 130 119 124 126 122 129 126 132 130 136 122
140 144 150 132 146 146 139 145 137 142 141 133 142 140 153 146 152 140
160 161 171 150 163 160 155 163 155 158 154 157 163 155 171 161 171 156
180 183 189 168 180 182 176 180 171 173 175 175 179 170 188 180 189 174
200 202 208 184 204 205 198 202 192 197 196 191 197 195 207 202 211 195
224 233 232 220 228 237 217 231 215 228 213 217 233 215 237 232 237 216
250 260 264 246 251 264 247 260 237 254 243 243 260 236 261 258 271 242
280 295 292 275 300 300 277 288 266 277 281 265 286 280 288 288 302 271
315 327 337 303 335 337 320 323 305 315 313 301 315 312 341 324 338 310
355 376 336 376 361 357 364 343 355 341 349 358 344 380 367 379 346
400 426 377 413 410 406 403 380 387 388 389 394 378 418 411 430 387
450 472 415 459 461 456 452 426 440 438 424 433 429 460 461 480 434
500 514 489 481 478 482 473 522 539 492
560 565 556 532 543 544 520 575 550
630 624 597 593 633 618
710 675
iN = Nominal ratio
103
Exact ratios

Bevel-Helical Gear Units, two-stage

Type PLB

Gearbox Size

iN 10 12 16 20 25 31 40 45
5.6 5.67 5.57 5.57 5.57 5.68 5.67 5.67 5.67
6.3 6.32 6.21 6.21 6.21 6.38 6.32 6.32 6.32
7.1 7.06 7.05 6.96 7.06 7.06 6.89 6.96 7.06
8 8.14 8.00 8.00 8.00 8.15 8.14 8.14 8.14
9 9.08 8.92 8.92 8.92 9.17 9.08 9.08 9.08
10 10.1 10.1 10.0 10.1 10.1 9.89 10.0 10.1
11.2 11.3 11.1 11.1 11.1 11.4 11.3 11.3 11.3
12.5 12.6 12.4 12.4 12.4 12.8 12.6 12.6 12,6
14 14.1 14.1 13.9 14.1 14.1 13.8 13.9 14.1
16 16.3 16.0 16.0 16.0 16.3 16.3 16.3 16.3
18 18.2 17.9 17.9 17.9 18.3 18.2 18.2 18.2
20 20.3 20.3 20.0 20.3 20.3 19.8 20.0 20.3
22.4 22.3 22.4 22.0 22.8 22.8 22.5 22.0 22.8

Bevel-Helical Gear Units, three-stage

Type PLC
Gearbox Size

iN
14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67

18 18.1 17.7 17.5 17.8 17.8 17.8 17.7 17.8

20 20.2 19.7 19.5 19.9 20.0 19.8 19.8 19.8 20.8
22.4 22.5 22.421.9 23.9 22.6 22.1 23.5 21.6 21.9 21.8 21.3 22.1 23.2 23.8
25 26.0 25.4 25.6 25.1 26.6 25.6 24.1 25.6 26.4 25.5 24.4 25.5 23.7 25.9 25.5 25.9 26.6
28 28.9 29.4 28.3 28.5 28.0 29.9 28.6 26.9 28.7 29.2 28.4 26.6 27.2 28.4 26.1 28.8 28.4 29.9 29.7
31.5 32.3 32.8 32.2 32.4 31.4 34.3 32.5 30.6 31.8 33.7 31.0 31.5 30.3 31.3 30.5 31.8 31.8 33.3 34.2
35.5 36.2 36.6 35.4 36.7 35.0 38.2 35.7 34.7 35.6 37.9 35.5 35.1 33.1 35.4 34.0 37.2 35.5 37.2 38.1
40 40.3 42.2 39.5 40.9 39.1 42.9 39.8 38.7 40.0 41.9 39.6 38.2 39.1 39.5 37.5 41.4 39.6 41.6 42.6
45 45.0 47.1 44.8 46.5 43.8 47.8 45.2 44.0 44.3 46.9 43.2 43.9 43.6 43.5 42.5 45.6 44.3 46.4 47.6
50 51.9 52.6 50.8 51.1 50.3 53.3 51.2 48.3 51.1 52.8 51.0 48.9 47.5 50.9 47.4 51.8 51.0 51.8 53.1
56 57.9 58.8 56.7 57.0 56.1 59.7 57.1 53.9 57.4 58.4 56.9 53.3 54.4 56.7 52.2 57.7 56.9 59.7 59.3
63 64.6 65.6 64.3 64.7 62.9 68.6 64.9 61.2 63.6 67.4 62.0 63.0 60.7 62.5 61.1 63.6 63.6 66.6 68.4
71 71.0 73.2 71.2 73.4 69.1 76.5 72.9 69.3 71.3 75.8 70.5 70.2 65.7 68.8 68.1 74.3 71.3 74.4 76.3
80 84.5 81.9 85.7 77.3 83.9 76.5 78.2 75.0 82.8 83.5 85.2
90 94.2 92.9 94.3 87.9 94.1 87.0 87.1 82.5 91.3 95.6
100 105 103 98.7 94.9 100
112 116 108

iN = Nominal ratio
104
Exact ratios

Bevel-Helical Gear Units, four-stage

Type PLD

Gearbox Size

iN
14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
71 72.3
80 80.6 81.2 75.4 80.8 80.6 79.3 81.2 80.6
90 90.0 90.6 84.1 90.2 90.6 88.4 90.5 89.9 94.4
100 104 103 94.3 103 103 100 106 96.3 97.8 99.8 97.5 100 105 108
112 116 118 117 117 108 115 116 109 116 120 114 109 117 109 119 116 118 120
125 129 131 130 131 121 129 129 122 130 132 127 119 121 130 120 132 129 136 135
140 145 146 148 148 135 148 147 139 144 153 138 141 135 143 140 146 144 151 155
160 161 169 162 168 151 165 162 157 161 172 159 157 148 162 156 170 161 169 173
180 180 188 181 188 168 185 180 175 181 190 177 171 174 181 172 190 180 189 193
200 208 210 206 213 189 206 205 199 201 213 193 196 194 200 195 209 201 210 216
224 232 235 233 235 217 230 232 219 231 239 228 218 212 233 217 237 232 235 241
250 258 262 260 262 242 257 259 244 260 265 254 238 243 260 239 264 258 271 269
280 284 293 295 297 271 295 294 278 288 305 277 281 271 286 280 291 288 302 310
315 338 327 337 298 330 330 314 323 343 315 313 295 315 312 341 324 338 346
355 377 376 369 351 380 341 349 344 380 379 387
400 421 426 406 399 426 388 389 378 418 434
450 462 472 447 424 460
500 482

iN = Nominal ratio
105
Exact ratios

Compact Drive (Bevel-Helical), three-stage

Type PWC

Gearbox Size

iN
14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
25 26.0 25.4 25.1 25.6 25.6 25.5 25.5 25.5
28 28.9 28.3 28.0 28.6 28.7 28.4 28.4 28.4 29.9
31.5 32.3 32.2 31.4 34.3 32.5 31.8 33.7 31.0 31.5 31.3 30.5 31.8 33.3 34.2
35.5 36.2 35.4 36.7 35.0 38.2 35.7 34.7 35.6 37.9 35.5 35.1 35.4 34.0 37.2 35.5 37.2 38.1
40 40.3 42.2 39.5 40.9 39.1 42.9 39.8 38.7 40.0 41.9 39.6 38.2 39.1 39.5 37.5 41.4 39.6 41.6 42.6
45 45.0 47.1 44.8 46.5 43.8 47.8 45.2 44.0 44.3 46.9 43.2 43.9 43.6 43.5 42.5 45.6 44.3 46.6 47.6
50 51.9 52.6 50.8 51.1 50.3 53.3 51.2 48.3 51.1 52.8 51.0 48.9 47.5 50,9 47.4 51.8 51.0 51.8 53.1
56 57.9 58.8 56.7 57.0 56.1 59.7 57.1 53.9 57.4 58.4 56.9 53.3 54.4 56.7 52.2 57.7 56.9 59.7 59.3
63 64.6 65.6 64.3 64.7 62.9 68.6 64.9 61.2 63.6 67.4 62.0 63.0 60.7 62.5 61.1 63.6 63.6 66.6 68.4
71 71.0 73.2 71.2 73.4 69.1 76.5 72.9 69.3 71.3 75.8 70.5 70.2 65.7 68.8 68.1 74.3 71.3 74.4 76.3
80 84.5 81.9 85.7 77.3 83.9 76.5 78.2 75.0 82.8 83.5 85.2
90 94.2 92.9 94.3 87.9 94.1 87.0 87.1 82.5 91.3 95.6
100 105 103 98.7 94.9 100
112 116 108

Compact Drive (Bevel-Helical), four-stage

Type PWD
Gearbox Size

iN
14 16 18 20 22 25 28 31 35 40 42 45 47 50 53 56 60 63 67
71 72.3
80 80.6 81.2 75.4 80.8 80.6 79.3 81.2 80.6
90 90.0 90.6 84.1 90.2 90.6 88.4 90.5 89.9 94.4
100 104 103 94.3 103 103 100 106 96.3 97.8 99.8 97.5 100 105 108
112 116 118 117 117 108 115 116 109 116 120 114 109 117 109 119 116 118 120
125 129 131 130 131 121 129 129 122 130 132 127 119 121 130 120 132 129 136 135
140 145 146 148 148 135 148 147 139 144 153 138 141 135 143 140 146 144 151 155
160 161 169 162 168 151 165 162 157 161 172 159 157 148 162 156 170 161 169 173
180 180 188 181 188 168 185 180 175 181 190 177 171 174 181 172 190 180 189 193
200 208 210 206 213 189 206 205 199 201 213 193 196 194 200 195 209 201 210 216
224 232 235 233 235 217 230 232 219 231 239 228 218 212 233 217 237 232 235 241
250 258 262 260 262 242 257 259 244 260 265 254 238 243 260 239 264 258 271 269
280 284 293 295 297 271 295 294 278 288 305 277 281 271 286 280 291 288 302 310
315 338 327 337 298 330 330 314 323 343 315 313 295 315 312 341 324 338 346
355 377 376 369 351 380 341 349 344 380 379 387
400 421 426 406 399 426 388 389 378 418 434
450 462 472 447 424 460
500 482
iN = Nominal ratio
106
 900-1200-MB 1/3
Dimensions 3.99

Additional shaft for bevel-helical gear units

Type PLB, PLC, PLD

Tapped centre holes in shaft ends

DIN 332 Form DS

∅ d3

35 45 60...70 > 85
M 12 M 16 M 20 M 24

Keys to DIN 6885/1 supplied by ELECON

Size a ∅d 3 k3 l3 m3 ∅x 3

14 216
35 k6 218 100 118 -
16 272
18 293
45 k6 275 120 155 -
20 347
22 376
60 m6 337 140 197 195
25 434
28 464
70 m6 369 140 229 205
31 532
35 570
90 m6 446 180 266 255
40 647
42 693
45 759 100 m6 537 215 322 328
47 845
50 857
53 928 120 m6 600 215 385 348
56 1021
60 1032
63 1105 150 m6 725 250 475 440
67 1176
PLB10 94 35 k6 218 100 118 -
PLB12 127 45 k6 275 120 155 -
PLB16 164 60 m6 337 140 197 195
PLB20 201 70 m6 369 140 229 205
PLB25 247 90 m6 446 180 266 255
PLB31 302 100 m6 537 215 322 328
PLB40 374 120 m6 600 215 385 348
PLB45 449 150 m6 725 250 475 440
107
 900-0200-MB 1/2
Dimensions 3.99

Solid through input shafts for helical gear units

Type PC 14-…PC 56-… / PD 14-…PD 25-…

Tapped centre holes in shaft ends

DIN 332 Form DS

∅ d1, d3
25...30 35 40...50 60...85 > 85
M 10 M 12 M 16 M 20 M 24

Keys to DIN 6885/1 supplied by ELECON

Input Shaft

Type iN ∅d 1 k1 l1 m1 ∅x 1 ∅d 3 k3 l3 m3 ∅x 3

4...14 30 k6 218 100

PC 14 35 k6 218 100 118 – 118 –
16...18 25 k6 200 82
6.3...22.4 30 k6 218 100
PC 16 35 k6 218 100 118 – 118 –
25...28 25 k6 200 82
4...14 45 k6 275 120
PC 18 45 k6 275 120 155 – 155 –
16...18 30 k6 255 100
5.6...20 45 k6 275 120
PC 20 45 k6 275 120 155 – 155 –
22.4...25 30 k6 255 100
4...14 60 m6 337 140
PC 22 60 m6 337 140 197 195 197 195
16...18 40 k6 317 120
5.6...20 60 m6 337 140
PC 25 60 m6 337 140 197 195 197 195
22.4...25 40 k6 317 120
4...14 70 m6 369 140
PC 28 70 m6 369 140 229 205 229 205
16...18 50 k6 349 120
5.6...20 70 m6 369 140
PC 31 70 m6 369 140 229 205 229 205
22.4...25 50 k6 349 120
4...14 85 m6 446 180
PC 35 90 m6 446 180 266 255 266 255
16...18 60 m6 406 140
5...18 85 m6 446 180
PC 40 90 m6 446 180 266 255 266 255
20...22.4 60 m6 406 140
4...14 100 m6 537 215
PC 42 100 m6 537 215 322 328 322 328
16...18 80 m6 492 170
5...18 100 m6 537 215
PC 45 100 m6 537 215 322 328 322 328
20...22.4 80 m6 492 170
6.3...22.4 100 m6 537 215
PC 47 100 m6 537 215 322 328 322 328
25...28 80 m6 492 170
12.5; 14 120 m6 600 215
PC 50 120 m6 600 215 385 348 385 348
16; 18 95 m6 565 180
14; 16 120 m6 600 215
PC 53 120 m6 600 215 385 348 385 348
18; 20 95 m6 565 180
18; 20 120 m6 600 215
PC 56 22.4; 25 120 m6 600 215 385 348 385 348
95 m6 565 180
PD 14 20...71
25 k6
25 k6 203 82 121 – 203 82 121 –
PD 16 31.5...112
16...45 35 k6 35 k6
PD 18 30 k6 283 100 183 – 30 k6 283 100 183 –
50...100
22.4...63 35 k6 35 k6
PD 20 71...140 30 k6 283 100 183 – 30 k6 283 100 183 –
20...45 50 k6 50 k6
PD 22 40 k6 347 120 227 130 40 k6 320 120 200 130
50...71
25...56 50 k6 50 k6
347 120 227 130 320 120 200 130
PD 25 63...90 40 k6 40 k6
108
 900-0200-MB 2/2
Dimensions 3.99

Solid through input shafts for helical gear units

Type

PD 28-…PD 67-…

PE 18-…PE 67-… Tapped centre holes in shaft ends

DIN 332 Form DS

∅ d1, d3
25...30 35 40...50 60...85 > 85
M 10 M 12 M 16 M 20 M 24

Keys to DIN 6885/1 supplied by ELECON

Input Shaft
Type iN ∅d 1 k1 l1 m1 ∅x1 ∅d 3 k3 l3 m3 ∅x 3

16...45 50 k6 50 k6
PD 28 362 120 242 362 120 242 –
50...100 40 k6 40 k6
22.4...63 50 k6 50 k6
PD 31 71...140 40 k6 362 120 242 40 k6 362 120 242 –
16...45 70 m6 435 145 70 m6 435 145
PD 35 50...100 290 50 k6 290 205
50 k6 415 125 415 125
20...56 70 m6 435 145 70 m6 435 145
PD 40 290 – 290 205
63...125 50 k6 415 125 50 k6 415 125
16...45 80 m6 508 170 80 m6 508 170
PD 42 338 338
50...100 65 m6 483 145 65 m6 483 145
20...56 80 m6 508 170 80 m6 508 170
PD 45 338 338 245
63...125 65 m6 483 145 65 m6 483 145
25...71 80 m6 508 170 80 m6 508 170
PD 47 338 338
80...160 65 m6 483 145 65 m6 483 145
16...45 100 m6 595 215 100 m6 595 215
PD 50 380 380
50...100 100 m6 595 215 75 m6 540 160
20...56 100 m6 595 215 100 m6 595 215
PD 53 63...125 380 290 75 m6 380 290
100 m6 595 215 540 160
22.4...63 100 m6 595 215 100 m6 595 215
PD 56 380 380
71...140 100 m6 595 215 75 m6 540 160
16...45 130 m6 715 250 130 m6 715 250
PD 60 465 465
50...100 130 m6 715 250 100 m6 680 215
18...50 130 m6 715 250 130 m6 715 250
PD 63 465 390 465 390
56...112 130 m6 715 250 100 m6 680 215
20...56 130 m6 715 250 130 m6 715 250
PD 67 465 465
63...125 130 m6 715 250 100 m6 680 215
PE 18 90...315
25 k6 227 72 155 25 k6 227 72 155
PE 20 125...450
71...200 35 k6 35 k6
PE 22 307 100 207 307 100 207
224...450 30 k6 30 k6
90...250 35 k6 35 k6
PE 25 307 100 207 307 100 207
280...560 30 k6 30 k6
PE 28 71...450
35 k6 319 100 219 35 k6 319 100 219
PE 31 100...630
71...200 50 k6 50 k6
PE 35 380 120 260 380 120 260
224...450 40 k6 40 k6
100...280 50 k6 50 k6
PE 40 380 120 260 – 380 120 260 –
315...630 40 k6 40 k6
PE 42 71...450
PE 45 90...560 45 k6 412 107 305 45 k6 412 107 305
PE 47 112...710
PE 50 71...450
PE 53 90...560 70 m6 510 145 365 70 m6 510 145 365
PE 56 100...630
PE 60 71...450
PE 63 80...500 80 m6 610 170 440 80 m6 610 170 440
PE 67 100...630
109
 900-0254-MB 1/2
Dimensions 3.99

Backstop devices for helical gear units

Type
PC PD PE

∅ ∅ ∅
Type iN r1 a Type iN r1 a Type r1 a
r2 r2 r2

PC 14* PD 14*

PC 16* PD 16*
4...14 249 190 16...45 247 132
PC 18 293 PD 18 387 PE 18 293
16...18 219 132 50...100 239 115
218 140
5,6...20 249 190 22.4...63 247 132
PC 20 347 PD 20 441 PE 20 347
22.4...25 219 132 71...140 239 115
4...14 296 210 20...45 140
PC 22 376 PD 22 256 492 PE 22 376
16...18 275 175 50...71 132 275 175
5.6...20 296 210 25...56 140
PC 25 434 PD 25 256 550 PE 25 434
22.4...25 275 175 63...90 132
4...18 16...45 332 190
PC 28 322 210 464 PD 28 591 PE 28 464
50...100 300 148 322 210
5.6...25 322 22.4...63 332 190 532
PC 31 210 532 PD 31 659 PE 31
71...140 300 148
*
PC 35 11.2...14 372 250 570 PD 35 16...45 347 210 734 PE 35 570
16...18 344 210 50...100 330 188 372 250

PC 40* 14...18 372 250 647 PD 40 20...56 347 210 811 PE 40 647
20...22.4 344 210 63...125 330 188
16...45 404 245
PC 42* 693 PD 42 50...100 394 894 PE 42 693
210
20...56 404 245 456 315
PC 45* 759 PD 45 63...125 960 PE 45 759
394 210
25...71 404 245
PC 47* 845 PD 47 1046 PE 47 845
80...160 394 210
* On request

Location of shafts and direction of rotation, see dimension sheets.

Backstops have adequate capacities to deal with full rated torque.

110
 900-1254-MB 1/3
Dimensions 3.99

Backstop devices for bevel-helical gear units

Type

PLB, PLC, PLD PWC PWD

Size r1 ∅ r 2 a

14 216
182 105
16 272
18 293
218 140
20 347
22 376
275 175
25 434
28 464
322 210
31 532
35 570
372 250
40 647
42 693
45 456 315 759
47 845
50 857
53 520 342 928
56 1021
60 1032
63 626 440 1105
67 1176
PLB10 182 105 94
PLB12 218 140 127
PLB16 275 175 164
PLB20 322 210 201
PLB25 372 250 247
PLB31 456 315 302
PLB40 520 342 374
PLB45 626 440 449
Location of shafts and direction of rotation, see dimension sheets

Backstops have adequate capacities to deal with full rated torque.

111
 900-0212-MB 1/2
Dimensions 3.99

Hollow-shaft design with key-way

10 : DS M16 DIN 332

screw secured, clients supply
12…16 DS M20 DIN 332
≥18 : DS M24 DIN 332

Design of machine shaft

Design of hollow-shaft

Key of machine shaft not to be supplied by ELECON.

Any types except PLB

Gearbox ∅ ∅
Screw key
Size a d1 h6 dM min ∅d s k 21 k 22 l1 l2 L l min p t1 s ISO 4014 bxh

14 5 65 77 180 123 140 50 72 215 180 19 4,8 M 10 M 20 x 55 18 x 7

16 5 75 96 230 123 139 60 82 215 180 18 7,5 M 12 M 20 x 55 20 x 12
18 5 90 107 230 157 173 70 95 279 250 18 6,2 M 12 M 24 x 60 25 x 9
20 5 100 120 282 157 173 80 109 276 220 24 10 M 16 M 24 x 65 28 x 16
22 5 110 128 282 189 205 90 119 340 280 24 10 M 16 M 24 x 65 28 x 16
25 6 130 150 308 215 250 100 132 388 280 26 11 M 20 M 24 x 70 32 x 18
28 6 140 160 338 250 300 110 147 453 320 29 12 M 20 M 24 x 70 36 x 20
31 6 160 180 363 250 300 125 162 453 320 27 13 M 20 M 24 x 70 40 x 22
35 6 170 190 380 285 320 135 180 515 400 35 13 M 20 M 24 x 70 40 x 22
40 6 190 210 410 285 320 150 195 515 400 32 15 M 20 M 24 x 70 45 x 25
Only PLB
Type
PLB 10 5 42 53 180 123 140 40 58 219 140 18 3,9 M 10 M 16 x 45 12 x 6
PLB 12 5 65 77 180 157 174 60 82 283 180 18 4,8 M 10 M 20 x 55 18 x 7
PLB 16 5 75 96 230 189 206 60 82 347 180 18 7,5 M 12 M 20 x 55 20 x 12
PLB 20 5 100 120 282 220 236 80 109 402 220 24 10 M 16 M 24 x 70 28 x 16
PLB 25 6 120 140 308 265 297 95 123 492 280 22 11 M 16 M 24 x 70 32 x 18
PLB 31 6 140 160 338 310 354 110 149 573 320 29 12 M 20 M 24 x 70 36 x 20
PLB 40 6 170 190 380 380 412 135 180 705 400 35 13 M 20 M 24 x 70 40 x 22
112
 900-0213-MB 1/5
Dimensions 3.99

Hollow-shaft design with shrink disc

Thread

Mounting of shrink disc Design of machine shaft

Assembling and replacing the shrink disc according to instruction Manual 1) Screw tightening torque

Shrink disc Hollow shaft Machine shaft

Gearbox
Size ∅ ∅
Ta 1)
Type ∅d Screw [Nm] ∅ ds k21 k 22 ∅ de s L a d1 h6 d3 f6 l1 l2

14 80 - 81 80 M 10 70 149 123 197 22 M 10 283 5 70 70 34 256

16 100 - 81 100 M 10 70 199 123 197 23 M 12 290 5 80 80 44 253
18 110 - 81 110 M 12 121 199 157 231 25 M 12 367 5 90 90 50 325
20 125 - 81 130 M 12 121 251 157 247 27 M 16 371 5 100 105 54 324
22 140 - 81 140 M 14 193 251 189 279 27 M 16 443 5 110 115 58 392
25 165 - 81 170 M 16 295 315 215 340 27 M 20 504 6 130 135 70 442
28 175 - 81 180 M 16 295 345 250 360 33 M 20 576 6 140 150 70 514
31 200 - 71 200 M 16 250 365 250 375 33 M 20 594 6 160 170 85 517
35 220 - 71 220 M 16 250 385 285 430 33 M 20 677 6 170 g6 180 104 581
40 240 - 71 240 M 20 490 420 285 435 33 M 20 682 6 190 g6 200 108 582
42 260 - 71 260 M 20 490 470 315 475 33 M 20 750 6 210 g6 220 119 639
45 280 - 71 280 M 20 490 500 320 485 33 M 20 763 6 230 g6 240 130 641
47 300 - 71 300 M 20 490 540 330 515 33 M 20 800 6 245 g6 250 138 670
50 320 - 71 320 M 20 490 553 390 574 33 M 20 918 6 260 g6 270 138 788
53 340 - 71 340 M 20 490 613 390 600 33 M 20 933 6 270 g6 280 152 789
56 360 - 71 360 M 20 490 613 390 600 33 M 20 939 6 290 g6 300 158 789
60 380 - 71 380 M 24 840 693 465 705 33 M 20 1093 6 310 g6 320 162 939
63 400 - 71 400 M 24 840 693 465 705 33 M 20 1108 6 330 g6 340 162 939
67 400 - 81 400 M 27 1450 693 465 705 33 M 20 1108 6 330 g6 340 177 939
Type Only PLB
PLB 10 55 - 81 55 M8 35 149 123 197 17 M 10 278 5 45 45 33 252
PLB 12 80 - 81 80 M 10 70 149 157 231 22 M 10 349 5 65 65 34 322
PLB 16 100 - 81 100 M 10 70 199 189 263 23 M 12 422 5 80 80 44 385
PLB 20 125 - 81 130 M 12 121 251 220 310 27 M 16 495 5 100 105 54 448
PLB 25 155 - 81 160 M 14 193 313 265 365 27 M 16 599 6 120 130 64 543
PLB 31 175 - 81 180 M 16 295 345 310 415 33 M 20 697 6 140 150 70 635
PLB 40 220 - 71 220 M 16 250 385 380 525 33 M 20 867 6 170 g6 180 104 770
PLB 45 260 - 71 260 M 20 490 467 445 605 33 M 20 1010 6 210 g6 220 120 900
113
 900-1150-MB 1
Dimensions 3.99

Motor-Attachment KPLB..

Motor bell housing available with or without motor.

Appropriate flexible coupling is part of ELECON supply.
Overload slip clutches on request.
Flexible coupling

Motor bell housing

Type KPLB..-R1. Type KPLB..-R1.

Pos. of gear case **) **)
Motor Motor
Size R10 R11
Size
j6 j6 ∅D max g1 j1 Size ∅a1 ∅D max g1 j1 Size ∅ a1
M
200 L 400 950 ∅ 660 315 S 660
L M
182 576 350 180 M 280 S
L
350 550
160 M 250 250 M

*) 920 494
28 – 300
10 M 225 M
450
132 S
S 300 20
155 526 260 112 M 200 L 400
250 890 354
100 L *) 350
*) 200 210 *) 300
860 ∅ 300
280 S
∅ 550 550 *) 250
250 M
679 M
∅ 660
M
∅ 450 225 S 450 1064 315 S 660
M
200 L 400 280 S 550
182 180
L 1034 494 250 M
M 360
12 – – 350 25
649 350 160
L
*) 450
M
M
132 S 300 *) 400
967 404
*) 300 *) 350
M
155 599 260 *) 250 1174 ∅ 660 315 S 660
M
*) 200 280 S 550
315
M 1144 494 *)
868 ∅ 660 S 660 31 360 450
280 M
250 S
*) 400
550 1077 404
838 494 250 M *) 350
M
225 S 450
16 23 – 200 L 400
L
723 354 180 M
210 L 350
160 M
*) 300
778 ∅ 300 *) 250
*) Other motor bell housings available
**) Maximum diameter of coupling

114
NOTES

115
 900-1250-MB 1/1
Dimensions 3.99

Motor-Attachment KPLC..

Flexible coupling

Motor bell housing available with or without motor.

Appropriate flexible coupling is part of ELECON
supply. Overload slip clutches on request.

Motor bell housing

Type KPLC..-R1. Type KPLC..-R1.
Pos. of gear case **) Motor Pos. of gear case **) Motor
Size R10 R11 Size R10 R11

j6 j6 ∅D max g1 j1 Size ∅a1 j6 j6 ∅D max g1 j1 Size ∅a1

200 L 400 200 L 400

L L
180 M 180 M
182 698 350 L 350 182 754 350 L 350
160 M 160 M
14 28 – *) 300 16 – – *) 300
M M
132 S 300 132 S 300
112 M 112 M
155 648 260 250 155 704 260 250
100 L 100 L

*) 200 *) 200
∅ 550 280 S
∅ 550 280 S
550 550
845 250 M
899 250 M
M M
∅ 450 225 S 450 ∅ 450 225 S 450
200 L 400 200 L 400
18 – – 182 L 20 – – 182 L
180 M 180 M
815 350 350 869 350 350
L L
160 M 160 M
M 132 M
132 S 300 S 300
*) 300 *) 300
155 765 260 *) 250 155 819 260 *) 250
*) 200 *) 200
M M
1080 ∅ 660 315 S 660 1138 ∅ 660 315 S 660
M M
280 S
280 S
250 550 250 550
1050 494 250 M 1108 494 250 M
M M
225 S 450 225 S 450
22 23 – 200 L 400 25 – – 200 L 400
935 354 L 993 354 L
180 M 180 M
210 L 350 210 L 350
160 M
160 M

*) 300 *) 300
990 ∅ 300 1048 ∅ 300
*) 250 *) 250
1213 ∅ 660 315 M
660 1281 ∅ 660 315 M
660
S S
280 M 280 M
S S
250 250 M
550 250 250 M 550
1183 494 M 1251 494 M
225 S 450 225 S 450
28 – – 31 – –
200 L 400 200 L 400
1153 354 1221 354 *)
*) 350 350
210 210 *)
*) 300 300
1123 ∅ 300 1191 ∅ 300
*) 250 *) 250
*) Other motor bell housings available
**) Maximum diameter of coupling

116
 900-1250-MB 2
Dimensions 3.99

Motor-Attachment KPLC..

Motor bell housing available with or without motor. Appropriate flexible coupling is part of ELECON supply. Overload slip clutches on
request.

Motor DIN 42677-IMB5-4-1500 (1800)

Flexible coupling

Motor bell housing

Type KPLC..-R1. Type KPLC..-R1.

**) Motor **) Motor
Size Size
∅D max g1 j1 Size ∅a 1
∅D max g1 j1 Size ∅a 1

1487 ∅ 660 315 M

S 660 1564 ∅ 660 315 M
S 660
M M
280 S
550 280 S
550
35 360 1457 494 250 M 550 40 360 1534 494 250 M 550
*) 450 *) 450
*) 400 *) 400
1390 404 1467 404
*) 350 *) 350
M M
1710 ∅ 660 315 S 660 1776 ∅ 660 315 S 660
M M
280 S 550 280 S 550
42 360 1680 494 *) 450
45 360 1746 494
*) 450
*) 400 *) 400
1613 404 1679 404
*) 350 *) 350
M
1862 ∅ 660 315 S 660
280 M 550
S
47 360 1832 494
*) 450
*) 400
1765 404
*) 350

*) Other motor bell housings available

**) Maximum diameter of coupling

117
 900-1350-MB 1/1
Dimensions 3.99

Motor-Attachment KPLD..

Flexible coupling
Motor bell housing available with or without motor.
Appropriate flexible coupling is part of ELECON
supply. Overload slip clutches on request.

Motor bell housing

Type KPLD..-R1. Type KPLD..-R1.

Pos. of gear case **) Motor Pos. of gear case **) Motor
Size R10 R11 Size R10 R11

j6 j6 ∅D max g1 j1 Size ∅a1 j6 j6 ∅D max g1 j1 Size ∅a1

*) 400 *) 400
*) 350 *) 350
182 698 350 182 754 350
*) 300 *) 300
M M
132 S 300 132 S 300
14 28 – 16 – –
112 M 112 M
250 250
155 648 260 100 L 155 704 260 100 L
L L
90 S 90 S
200 200
80 80
∅ 550 *) 550 ∅ 550 *) 550
845 899
∅ 450 *) 450 ∅ 450 *) 450
*) 400 *) 400
180 M 180 M
182 L 350 182 L 350
815 350 160 M 869 350 160 M

18 – – 132 M
300 20 – – 132 M
300
S S
*) 300 *) 300
112 M 112 M
155 765 260 250 155 819 260 250
100 L 100 L

90 L 200 90 L 200
*) 550 *) 550
250 1050 494 250 1108 494
225 S 450 225 S 450
200 L 200 L 400
400
L L
22 23 – 1020 354 180 M
25 – – 1078 354 180 M
L 350 L 350
160 M 160 M
210 M
210 M
132 S 300 132 S 300
990 ∅ 300 112 M 1048 ∅ 300 112 M
250 250
100 L 100 L

250 M 550 250 M 550

250 1183 494 M
250 1251 494 M
225 S 450 225 S 450
200 L 400 200 L 400
L L
28 – – 1153 354 180 M 31 – – 1221 354 180 M
L 350 L 350
210 160 M 210 160 M

132 M 132 M
S 300 S 300
1123 ∅ 300 1191 ∅ 300
*) 250 *) 250

*) Other motor bell housings available

**) Maximum diameter of coupling

118
 900-1350-MB 2
Dimensions 3.99

Motor-Attachment KPLD..

Motor bell housing available with or without motor. Appropriate flexible coupling is part of ELECON supply. Overload slip clutches on
request.

Motor DIN 42677-IMB5-4-1500 (1800)

Flexible coupl.

Motor bell housing

Type KPLD..-R1. Type KPLD..-R1.

**) Motor **) Motor
Size Size
∅D max g1 j1 ∅D max g1 j1 ∅a
Size ∅a 1 Size 1

M M
280 S 550 280 S 550
1457 494 250 M 550 1534 494 250 M 550
M M
35 360 225 S 450 40 360 225 S
450
200 L 400 200 L 400
1390 404 180 L
350 1467 404 180 L
350
M M
160 L 350 160 L 350
1710 ∅ 660 315 M
S 660 1776 ∅ 660 315 M
S 660
M M
280 S 550 280 S
550

360 1680 494 250 M 450 360 1746 494 250 M 450
42 45
M 225 M
225 S 450 S
450
200 L 400 200 L 400
1613 404 1679 404
180 L 350 180 L 350
M
1862 ∅ 660 315 S 660
M
280 S 550
1832 494 250 M 450
47 360 M
225 S 450
200 L 400
1765 404
180 L 350
*) Other motor bell housings available
**) Maximum diameter of coupling

119
 900-0260-MB 1/4
Dimensions 3.99

Cooling coil for horizontal position of gear case R1

Only PC14, PD14, PLC14, PLD14, PWC14, PWD14

Water connection for cooling coil without cooling water controller Water connection for cooling coil with cooling water controller

from PC16, PD16, PE18, PLB10, PLC16, PLD16, PWC16, PWD16

Water connection for cooling coil without cooling water controller Water connection for cooling coil with cooling water controller

Cooling coil placed adjacent to the final gear wheel. For the gear wheel position see the dimension sheets.

Size a b c d e e1 s *) Vwater ∆pw

l / min bar
14 36 34 – – 144 297 R 3/8 A 0.3
16 38 34 38 74 193 346 R 3/8 A 0.55
18 44 42 77 65 170 323 R 3/8 A 6 0.3
20 44 42 74 69 226 379 R 3/8 A 0.75
22 53 48 88 67 201 354 R 3/8 A 0.75
25 55 48 76 115 263 399 R 1/2 A 0.75
28 55 63 114 101 239 375 R 1/2 A 0.55
31 58 60 111 106 300 436 R 1/2 A 1.1
35 45 87 115 87 300 436 R 1/2 A 0.75
12
40 35 97 125 97 376 512 R 1/2 A 0.5
42 40 100 130 100 337 473 R 1/2 A 0.4
45 40 100 130 100 405 541 R 1/2 A 0.5
47 40 105 130 105 487 623 R 1/2 A 0.5
50 55 120 165 120 415 554 R 3/4 A 0.5
53 55 120 165 120 490 629 R 3/4 A 0.6
56 55 125 165 125 588 727 R 3/4 A 0.6
18
60 80 125 190 125 495 634 R 3/4 A 0.6
63 80 125 190 125 570 709 R 3/4 A 0.6
67 80 125 190 125 645 784 R 3/4 A 0.6
PLB 10 On request
6
PLB 12 44 44 77 67 159 312 R 3/8 A 0.3
PLB 16 55 48 76 115 193 329 R 1/2 A 0.55
PLB 20 58 58 116 98 208 344 R 1/2 A 0.75
12
PLB 25 54 55 118 118 250 386 R 1/2 A 0.4
PLB 31 68 55 127 123 293 429 R 1/2 A 0.5
PLB 40 94 117 204 117 372 511 R 3/4 A 0.6
18
PLB 45 156 120 266 120 440 579 R 3/4 A 0.6

*) R indicates BSP

120
 900-0260-MB 2/1
Dimensions 3.99

Cooling coil for horizontal position of gear case R1

1. Cooling Coil 2. Cooling Coil

Water connection for cooling coil without cooling water controller

Water connection for cooling coil with cooling water controller

Water connections by the output side, optionally 1 or 2 cooling coils

Vwater ∆pw
Size a b c d e e1 s *) l / min bar
PB10 On request
6
PB12 44 44 77 67 158 311 R 3/8 A 0.3
PB16 56 45 82 110 196 332 R 1/2 A 0.55
PB20 58 58 116 98 211 347 R 1/2 A 0.75
12
PB25 54 55 118 118 255 391 R 1/2 A 0.4
PB31 68 55 127 123 298 434 R 1/2 A 0.5
PB40
On request
PB45

*) R indicates BSP

121
 900-0261-MB 1/5
Dimensions 3.99

Gear Box PB / PC / PD Fan cooling

Permissible location of shafts .1 and .2, see 900-…-MB2 / MB4

Type PB…R11
PC…R11
PD…R11

Air inlet

Attention : To mount the base-fitting secrws, desmount the fan cover. Mount the output hub only after mounting of the base-fitting screws.

d1
Type dN max k1 l11 m11 n11 n12
acc. to ratios

PB 10 35 k6 30 k6 100 226 60 166 170 405

PB 12 50 k6 40 k6 140 280 80 200 199 520
70 m6 – 140 338 105 233 244
PB 16 640
– 50 k6 140 318 85 233 244
80 m6 – 180 396 130 266 289
PB 20 755
– 65 m6 180 371 105 266 289
100 m6 – 180 495 175 320 309
PB 25 865
– 80 m6 180 450 130 320 309
130 m6 –
PB 31 *) 1020
– 100 m6 180 547 175 372 364
PB 40 *)
*) On request
PB 45 *)
PC 14/16 35 k6 100 218 60 158 159 358 / 395
PC 18/20 45 k6 140 275 80 195 199 360
PC 22/25 60 m6 140 337 100 237 244 460
PC 28/31 70 m6 140 369 100 269 289 555
PC 35/40 90 m6 180 446 140 306 409 710
PC 42/45/47 100 m6 180 537 175 362 509 830
PD 14/16 – 25 k6 100 203 42 161 120 335 / 355
PD 18/20 35 k6 30 k6 100 283 60 223 120 375
PD 22/25 50 k6 40 k6 100 347 80 267 133 465
PD 28/31 50 k6 40 k6 140 362 80 282 162 555
PD 35/40 70 m6 – 140 435 105 330 245 590
PD 35/40 – 50 k6 140 415 85 330 245 590
PD 42/45/47 80 m6 – 180 508 130 378 308 830
PD 42/45/47 – 65 m6 180 483 105 378 308 830
PD 50/53/56 100 m6 – 180 595 170 425 362 645

122
 900-0260-MB 2/4
Dimensions 3.99

Fan cooling for Gearbox PLB, PLC

Type PLB…R11
PLC…R11

Air inlet

Type b11 d1 dN max k1 l11 m11 x11

PLB 10
PLB 12 314 40 k6 100 533 80 453 39
PLB 16 380 50 k6 140 611 80 531 59
PLB 20 440 60 m6 140 723 105 618 89
PLB 25 468 75 m6 150 891 120 771 94
PLB 31 548 85 m6 180 1064 140 924 94
PLB 40 660 100 m6 180 1309 175 1134 150
PLB 45 On request
PLC 14 528 483 29
246 25 k6 100 45
PLC 16 584 539 34
PLC 18 699 619
314 40 k6 140 80 39
PLC 20 753 673
PLC 22 823 743 49
380 50 k6 140 80
PLC 25 881 801 59
PLC 28 986 881 59
440 60 m6 140 105
PLC 31 1054 949 89
PLC 35 1214 1094 80
468 75 m6 150 120
PLC 40 1291 1171 79
PLC 42 1455 1315 89
PLC 45 548 85 m6 180 1521 140 1381 109
PLC 47 1607 1467 109
PLC 50 1792 1617 150
PLC 53 660 100 m6 180 1863 175 1688 150
PLC 56 1956 1781 170

123
 900-0253-MB 1/3
Dimensions 3.99

Torque reaction arm for hollow-shaft gear unit

machine side

machine side

Torque arm on driven machine side

Steel : Remin (Yield stress) 300 N/mm2

Torque arm not supplied by ELECON

Gearbox
a t c6 d H9/h6 b s
Size
14 - 16 29 29 27 16 40 10
18 - 20 35 35 32 22 45 16
22 - 25 45 45 41 26 55 20
28 - 31 53 53 48 33 70 25
35 - 40 45 60 55 40 80 30
42 - 45 50 68 62 45 110 35
47 60 68 62 52 125 40
50 - 56 65 82 75 60 130 45
60 - 63 70 98 90 65 140 50
67 80 98 90 70 140 50
PLB 10
PLB 12 35 35 32 22 45 16
PLB 16 45 45 41 26 55 20
PLB 20 53 53 48 33 70 25
PLB 25 53 53 48 33 70 25
PLB 31 52 53 48 33 70 25
PLB 40 50 68 62 45 110 35
PLB 45 65 82 75 60 130 45

124
 900-0220-MB 9/2
Dimensions 6.98

Fixing holes of gear case

*) Fixing holes for type PLB see dimensions sheet 900-1220-MB9, for type PB on request

*) Mounting surface [1] Mounting surface [3] + [4]

Size TA[Nm]*
e e8 f ∅s ds x lmax t t1 t2 u ∅ d H9 ds x lmax 10.9
e5 e6 f6 g g6 o
P..14 474 121 216 12 M10x45 348 58 125 192 16 M14x65 180 357 126 274 344 113 121
P..16 579 170 216 12 M10x80 453 107 217 192 16 M14x65 180 413 175 334 400 162 151
P..18 622 155 284 14.5 M12x55 486 87 175 248 22 M20x80 550 475 162 348 458 145 155
P..20 732 211 284 14.5 M12x90 596 143 285 248 22 M20x80 550 528 218 414 511 201 190
P..22 782 193 346 18.5 M16x65 622 113 226 306 26 M24x100 950 600 200 426 580 180 190
P..25 896 249 346 18.5 M16x90 736 169 340 306 26 M24x100 950 658 256 486 638 236 220
P..28 948 230 408 24 M20x80 752 132 265 360 33 M30x120 1900 731 245 508 706 221 227
P..31 1085 299 408 24 M20x110 889 201 402 360 33 M30x120 1900 798 307 574 773 282 262

*) Mounting surface [5] Mounting surface [6]

Size e7 f7 ∅ s7 ds x lmax t7 u7 e7 f7 ∅ s8 ds x lmax t7 u7
P..14 274 216 14,5 M12x90 206 194 274 216 14,5 M12x90 206 194
P..16 334 216 14,5 M12x90 266 194 334 216 14,5 M12x90 266 194
P..18 348 284 16,5 M14x100 260 258 348 284 16,5 M14x100 260 258
P..20 414 284 16,5 M14x100 330 258 414 284 16,5 M14x100 330 258
P..22 426 346 24 M20x130 326 312 426 346 24 M20x130 326 312
P..25 486 346 24 M20x130 384 312 486 346 24 M20x130 384 312
P..28 504 408 28 M24x150 386 366 504 408 28 M24x150 386 366
P..31 574 408 28 M24x150 456 366 574 408 28 M24x150 456 366

*) Necessary tightening torques TA for shaft screws with head support according to DIN 912.934 etc. strength category 10.9 with supposed
coefficient of friction µ = 0.125 for non treated, oiled screws according to the VDI directions 2230.
125
 900-1220-MB 9
Dimensions 3.99

Fixing holes of gear case - PLB

Mounting surface [1] Mounting surface [3] + [4]

Size TA[Nm]*
e e8 f ∅ s ds x lmax t t1 t2 u ∅d H9 ds x lmax 10.9 e5 e6 f6 g g6 o
PLB 10 338 107 216 12 M10x45 218 50 - 192 16 M14x65 180 235 112 274 222 99 121
PLB 12 448 147 284 14.5 M12x70 311 78 - 248 22 M20x80 550 309 155 348 292 138 155
PLB 16 556 179 348 18.5 M16x110 396 99 - 306 26 M24x100 950 388 190 486 368 170 220
PLB 20 662 207 410 24 M20x130 461 104 - 360 33 M30x120 1900 467 219 578 442 194 262
PLB 25 772 251 438 24 M20x160 574 152 - 388 33 M30x120 1900 533 263 698 508 238 322
PLB 31 928 297 522 28 M24x180 716 191 315 468 33 M30x180 1900 643 309 798 618 284 373

Mounting surface [5] Mounting surface [6]

Size
e7 f7 ∅ s7 ds x lmax t7 u7 e7 f7 ∅ s8 ds x lmax t7 u7
PLB 10 274 216 14.5 M12x75 206 194 274 216 14.5 M12x80 206 194
PLB 12 348 284 16.5 M14x100 260 258 348 284 16.5 M14x100 260 258
PLB 16 486 348 24 M20x130 384 312 486 348 24 M20x130 384 312
PLB 20 578 410 28 M24x150 456 366 578 410 28 M24x150 456 366
PLB 25 698 438 28 M24x180 578 396 698 438 28 M24x180 578 396
PLB 31 798 522 28 M24x180 678 474 798 522 28 M24x180 678 474

*) Necessary tightening torques TA for shaft screws with head support according to DIN 912.934 etc. strength category 10.9 with supposed
coefficient of friction µ = 0.125 for non treated, oiled screws according to the VDI directions 2230.
126
AHMEDABAD : ASANSOL : BILASPUR :
Phone : +91 (79) 26406685, 26406686 Phone : +91 (341) 2205901, 2211726 Phone : +91 (7752) 228922, 224122
Fax : 26401363 Fax : 2202038 Fax : 223188
E-Mail : [email protected] E-Mail : [email protected] E-Mail : [email protected]
BANGALORE : CHENNAI : DHANBAD :
Phone : +91 (80) 22250082, 22260219 Phone : +91 (44) 24349497, 24349237 Phone : +91 (326) 2306283, 2302320
Fax : 22281834 Fax : 24349643 Fax : 2302320
E-Mail : [email protected] E-Mail : [email protected] E-Mail : [email protected]
INDOR : JAMSHEDPUR : KOLKATA :
Phone : +91 (731) 2576100 Phone : +91 (657) 2464241, 2361837 Phone : +91 (33) 24761861, 24760876
Fax : 2464241 Fax : 24761831
E-Mail : [email protected] E-Mail : [email protected]
MUMBAI : NAGPUR : NEW DELHI :
Phone : +91 (22) 22821315, 2282025 Phone : +91 (712) 2540771, 2531601 Phone : +91 (11) 23414339, 40, 41
Fax : 22870791 Fax : 2554982 Fax : 23709046
E-Mail : [email protected] E-Mail : [email protected] E-Mail : [email protected]
PUNE : SECUNDRABAD : VADODARA :
Phone : +91 (20) 26141795 Phone : +91 (40) 27844748, 27845250 Phone : +91 (265) 2312972, 2312980
Fax : 26141793 Fax : 27848317 Fax : 2312980
E-Mail : [email protected] E-Mail : [email protected] E-Mail : [email protected]

AUSTRILA : CHINA : FAR EAST :

ELECON AUSTRALIA PTY. LTD. ELECON ENGINEERING (SUZHOU) CO. LTD ELECON SINGAPORE PTE. LTD.
Phone : +61 2 9542 2955, +61 2 9521 6221 Phone : +86 512 62881662 Phone : +65 62278258, +65 62278425
Fax : +61 2 9542 2677 Fax : +86 512 62881662 Fax : +65 62278942
E-Mail : [email protected] E-Mail : [email protected] E-Mail : [email protected]
[email protected] [email protected] [email protected]

AFRICA : MIDDLE EAST :

ELECON AFRICA PTY. LTD. : ELECON MIDDLE EAST FZCO
Phone : +27 11 4771776, +27 11 4766560 Phone : +971 4 6091 424, 425
Fax : +27 11 4767250 Fax : +971 4 6091 426
E-Mail : [email protected] E-Mail : [email protected]
[email protected] [email protected]