Scribd
Upload
844 views1 page

Checklist For Safety Belt Inspection

The document provides a checklist for inspecting safety belts. It lists elements that should be checked for damage and other inspection criteria like the harness material, lanyard length, and certification.

Uploaded by

Gyanendra Srivastava
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
844 views1 page

Checklist For Safety Belt Inspection

The document provides a checklist for inspecting safety belts. It lists elements that should be checked for damage and other inspection criteria like the harness material, lanyard length, and certification.

Uploaded by

Gyanendra Srivastava
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

No damage in the following elements:

1. Brace.
2. Secondary Strap.
3. Under Bottom strap.
Ahluwalia Contracts (India) Ltd.

4. Thigh strap.
5. Tightening elements.
6. Coupling element.
Urban Oasis Projects, Sector -62, Gurugram Haryana

Check for damage due to contact with heat,


paint, solvents or corrosives.
CHECKLIST FOR SAFETY BELT INSPECTION

Inspect harness webbing for cuts, tears, burns


and abrasion damage especially where there is
contact with hardware
Contractor Name:

Hook in the lanyard is in working condition and


with lock
No damage in the lanyard and lanyard joints
Harness is ISI certified and tested by
manufacturer
Safety harness is made of Polyester with
polyimide Fiber rope
Lanyard length is not more than 1.8m
Harness is full body with double lanyard
(separate lanyard fixed in D-ring)
Safety Belt No.

Date:
SrNo

You might also like