F E D C B A

Solder Instruction b

1. Cable should be prepared for soldering. The cable/wires must be pretinned. n1,16 (9x)
2. Insert cable/wire into solder cup. (5:1)
3. Operate the soldering iron at 350°C, 50 Watt max. and use a pencil tip.
4. Put tip to wire in solder cup.
SEALING
D 5. After 1 second bring in solder. COMPOUND
D

6. Heat for 3 seconds longer. Do not heat contact more than 4 seconds in total.

0,34
9,54 +- 0,26
7. Remove soldering iron.
8. Wait until solder gets rigid again.
9. Do not solder adjacent contacts consecutively,
alternate position within the connector to minimize heat build up.

0,08
6,13 +- 0,17
0,8
30,88 +- 0,31
0,45

24,99 +- 0,13
0,12
0,43
12,6 +- 0,33

0,02
16,41 +- 0,05 8 +- 0,23
0,2

C C

10°
1,2 `0,2

8STD09SoM99A10X
CONEC ABC

n3,1 `0,1

SEE NOTE 5
B B

NOTES:
1. METALSHELLS: STAINLESS STEEL
2. INSULATORS: PBT GF UL 94 V-0; BLACK
b 3. SIGNAL CONTACTS: COPPER ALLOY; PLATING (SEE PART NO.)
o PLEASE ADD C for 30µin HARD GOLD over min. 50µin NICKEL
o PLEASE ADD B for 20µin HARD GOLD over min. 50µin NICKEL
o PLEASE ADD A for GOLD FLASH over NICKEL (PREFERRED TYPE)

SOLDER CUP ACCEPTS CABLE AWG 20

4. SEALING COMPOUND: PUR; BLUE
5. CONNECTOR IS PART MARKED: 8STD09SoM99A10X CONEC ABC (see note 3)

2:1 (5:1)
OWNERSHIP AND COPYRIGHT OF CONEC GmbH

DO NOT ALTER CAD DRAWING BY HAND

tolerance scale:
BE PASSED ON TO A THIRD PARTY WITHOUT

material: SEE NOTES

REPRODUCED IN ANY WAY, AND MAY NOT
THIS DRAWING MAY NOT BE COPIED OR

dim. in mm
A A
date name title:
drawn 14.09.09 Petker D-SUB FEMALE
appd. 14.09.09 Fischer SOLDER CUP 9pos.
WRITTEN PERMISSION.

norm for installation into water resistant hood

d-old 15K2A429 dwg no: DIN-
3xb Ä4441 23.08.2012 K.H. A3
a Original
R
15K1A429 b sh: 1
Directive 2002/95/EC RoHS compliant
rev. description date name part no: 8STD09SoM99A10X (see note 3)
F E D C B A