0% found this document useful (0 votes)
41 views

MC Quiz Questions PDF

The document contains a 10 question quiz about 8051 microcontrollers. It tests knowledge about the number of 16-bit registers, which register's flag bits are affected by arithmetic operations, how the stack pointer behaves during pushes, the amount of RAM storage, the file extension used for execution, the typical bit size, how INC and DEC instructions work, what type of interrupt RI/TI is, the typical crystal oscillator frequency, and what pin 9 represents.

Uploaded by

rudhurusaidharao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
41 views

MC Quiz Questions PDF

The document contains a 10 question quiz about 8051 microcontrollers. It tests knowledge about the number of 16-bit registers, which register's flag bits are affected by arithmetic operations, how the stack pointer behaves during pushes, the amount of RAM storage, the file extension used for execution, the typical bit size, how INC and DEC instructions work, what type of interrupt RI/TI is, the typical crystal oscillator frequency, and what pin 9 represents.

Uploaded by

rudhurusaidharao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

HINDU COLLEGE OF ENGINEERING & TECHNOLOGY

Diploma in Electronics and Communication Engineering(DECE) (C20)


V Semester
Subject Name:Microcontrollers and Applications
Subject Code:EC-502
Quiz
Date:
Time: Max Marks:5M
Instructions: 1. Answer all the bits
2. Each bit carries 1/4 mark
1. 8051 series has how many 16 bit registers? [ ]
a) 2 b) 3 c) 1 d) 0

2. When the microcontroller executes some arithmetic operations, then the flag bits of which register are affected? [ ]
a) PSW b) SP c) DPTR d) PC
3. If we push data onto the stack then the stack pointer [ ]
a) increases with every push b) decreases with every push
c) increases & decreases with every push d) none of the mentioned
4. RAM holds ______________ bytes of storage in 8051 [ ]
a) 124 b) 128 c) 320 d) 126

5. What is the file extension that is loaded in a microcontroller for executing any instruction? [ ]
a) .doc b) .c c) .txt d) .hex

HINDU COLLEGE OF ENGINEERING & TECHNOLOGY


Diploma in Electronics and Communication Engineering(DECE) (C20)
V Semester
Subject Name:Microcontrollers and Applications
Subject Code:EC-502
Quiz
Date:
Time: Max Marks:5M
Instructions: 1. Answer all the bits
2. Each bit carries 1/4 mark

1. 8051 series has how many 16 bit registers? [ ]


a) 2 b) 3 c) 1 d) 0
2. When the microcontroller executes some arithmetic operations, then the flag bits of which register are affected? [ ]
a) PSW b) SP c) DPTR d) PC

3. If we push data onto the stack then the stack pointer [ ]


a) increases with every push b) decreases with every push
c) increases & decreases with every push d) none of the mentioned

4. RAM holds ______________ bytes of storage in 8051 [ ]


a) 124 b) 128 c) 320 d) 126
5. What is the file extension that is loaded in a microcontroller for executing any instruction? [ ]
a) .doc b) .c c) .txt d) .hex
6. Mostly ____________ bit is an 8051 microcontroller [ ]
a) 2 b) 4 c) 6 d) 8

7. INC and DEC will work as ______ instructions. [ ]


a) Addition b) Move c) logical d) rotate
8. RI/TI is a ____________ interrupt. [ ]
a) External b) Bit
c) Serial communication d) All the above

9. The chip crystal oscillator holds a frequency of ____ MHz in 8051. [ ]


a) 6 b) 12 c) 18 d) 24

10. Pin 9 represents ______ pin in 8051 microcontroller. [ ]


a) Start b) Reset c) Ground d) None of these

6. Mostly ____________ bit is an 8051 microcontroller [ ]


a) 2 b) 4 c) 6 d) 8
7. INC and DEC will work as ______ instructions. [ ]
a) Addition b) Move c) logical d) rotate
8. RI/TI is a ____________ interrupt. [ ]
a) External b) Bit
c) Serial communication d) All the above

9. The chip crystal oscillator holds a frequency of ____ MHz in 8051. [ ]


a) 6 b) 12 c) 18 d) 24

10. Pin 9 represents ______ pin in 8051 microcontroller. [ ]


a) Start b) Reset c) Ground d) None of these

You might also like