R

The Transparent Specialist

VALVES

A wide variety of valves are described in this section. All the valves are made of Borosilicate Glass body & PTFE plug so that process fluid just comes in
contact with Glass & PTFE only. Borosilicate Glass body permits the visual checking of the operation.

All the valves are suitable for operation under full vacuum conditions & a maximum temperature of 200'C.

Borosilicate Valves are available from DN 15 to DN 50.

Bigger size valves are available on request.

18
 R

The Transparent Specialist

VALVES
STRAIGHT THROUGH VALVES
H

Cat.Ref. DN DN1 d L H
DN
PV0.5 12 12 10 125 125
PV0.7 15 15 10 125 125
PV1* 25 25 18 175 175 DN1
PV1.5/1 40 25 18 225 175 L
PV1.5* 40 40 26 225 200
PV2* 50 50 38 300 220
d
DN
Spindles are made of PTFE.

DRAIN VALVES
H

Cat.Ref. DN DN1 d L H D
DN
PVD0.5 12 12 10 125 125 22
PVD0.7 15 15 10 125 125 22
PVD1* 25 25 18 175 175 28 DN1
PVD1.5/1* 40 25 18 225 175 28 L
PVD1.5* 40 40 26 225 200 42
PVD2* 50 50 38 300 220 50
d

ANGLE VALVES

Cat.Ref. DN DN1 d L H Degree

PVE0.5 12 12 10 50 85 90 H
DN1 80°
PVE0.7 15 15 10 50 85 90
PVE1* 25 25 18 100 175 90 DN
PVE1/80* 25 25 18 100 175 80 d d
PVE1.5* 40 40 26 150 200 90
PVE2 50 50 38 150 220 90 L

DN
L

VENT VALVES

Cat.Ref. DN D d L L1
PVV0.5 12 12 10 125 90
PVV0.7* 15 12 10 125 90 L
PVV1* 25 12 10 150 90
D
PVV1.5* 40 12 10 150 100 d L1

DN

* marked items are available fast. 19

 R

The Transparent Specialist

VALVES
VENT / VACUUM VALVES
L2
D

Cat.Ref. DN D d L L1 L2 L3
d
PVW 1/0.7* 25 12 10 280 55 85 160
PVW 1.5/0.7* 40 12 10 280 65 85 160
DN
L3
L

BOTTOM OUTLET VALVES

DN These valves prevent the accumulation of solids or liquid in the bottom outlet of a vessel. This
DN valve can be incorporated in any spherical or cylindrical vessel.

L1 DN2
L1 DN2 Cat.Ref. DN DN1 DN2 L1 Type
DN1 BAL1* 25 25 25 150 A
DN1
BAL1.5* 40 25 25 150 B
BAL2 50 25 40 150 B

Type A Type B

SPACER BOTTOM OUTLET VALVES

B
Cat.Ref. DN DN1 DN2 L1 L B
SBAL1 25 25 15 40 110 175
DN
SBAL1.5 40 40 25 60 160 175
DN2
L1 SBAL2 50 50 40 60 160 175
L DN1

WEIGHT OPERATED PRESSURE RELIEF VALVE

The pressure relief valve (WPRV) is a valve used to control or limit the pressure in a system or
H1 vessel which can build up by a process upset, instrument or equipment failure, or fire.

The pressure is relieved by allowing the pressurized gas/fluid to flow out of the system. The
pressure relief valve is designed or set to open at a predetermined set pressure to protect Glass
vessels and other equipment from being subjected to pressures that exceed their design limits.
When the set pressure is exceeded, the pressure relief valve is forced open and a portion of the
gas/fluid is released maintaining the required system pressure.

Weight operated pressure relief valve is constructed of glass and PTFE. Sealing of moving parts is
effected by a PTFE bellows.
The maximum recommended operating temperature is 1500C and a range of pressure as
H
mentioned below.

It should be installed with the spindle vertical and adequate support should be given.

Model Size Pr. range (BAR.g) Appx. Height (H) Appx. Width (H1)
WPRV-1.5 DN40 0.4/0.7/0.9 240mm 275mm
WPRV-2 DN50 0.1/0.2/0.3 270mm 275mm

* marked items are available fast.

20