CP1290H 12V9Ah
The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is
absorbed by separators and plates and thus immobilized. Should the battery be accidentally
overcharged producing hydrogen and oxygen, special one-way valves allow the gases to escape thus
avoiding excessive pressure build-up. Otherwise, the battery is completely sealed and is, therefore,
maintenance-free, leak proof and usable in any position.
Construction
Component Positive plate Negative plate Container Cover Safety valve Terminal Separator Electrolyte
Raw material Lead dioxide Lead ABS ABS Rubber Copper Fiberglass Sulfuric acid
General Features Technology Parameter
l Absorbent Glass Mat (AGM) technology for
Battery model CP1290A
efficient gas recombination of up to 99% and
freedom from electrolyte maintenance or water ominal voltage 12V
adding.
Number of cell 6
l Not restricted for air transport-complies with
IATA/ICAO Special Provision A67. 20hR(0.45A, 10hR(0.86A, 5hR(1.57A, 1hR(6.66A,
Capacity 10.5V) 10.5V) 10.5V) 9.60V)
l UL-recognized component. (25℃)
9Ah 8.6Ah 7.85Ah 6.66Ah
l Can be mounted in any orientation.
l Computer designed lead, calcium tin alloy grid for Length Width Height Total Height
Dimensions
high power density.
151±1mm 65±1mm 94±1mm 100±1mm
l Long service life, float or cyclic applications.
l Maintenance-free operation. Approx. weight 2.50Kg ( 5.50
. lbs) ± 5%
l Low self discharge. Internal resistance Full charged at 25℃: ≤ 16.0 mOhms
l Case and cover available in both standard and
Self discharge 3% of capacity declined per month at 20℃ (average)
flame retardant ABS.
Operating Discharge Charge Storage
Dimensions and Weight temperature range -20～60℃ -10～60℃ -20～60℃
Max. discharge
135A (5s)
current (25℃)
Short circuit
450A
current
o o
Discharge Constant Current (Amperes at 77 F25 C)
End Point
5min 10min 15min 30min 1h 3h 5h 10h 20h
Volts/Cell
1.60V 36.1 25.2 19.3 11.6 6.66 2.59 1.62 0.88 0.47
1.65V 34.6 24.3 18.5 11.1 6.42 2.53 1.61 0.87 0.47
1.70V 33.1 23.3 17.7 10.5 6.18 2.46 1.59 0.87 0.46
1.75V 31.6 22.2 16.9 9.86 5.94 2.39 1.57 0.86 0.45
1.80V 30 21.2 16.1 9.21 5.68 2.32 1.55 0.85 0.44
o o
Discharge Constant Power (Watts at 77 F25 C)
End Point
5min 10min 15min 30min 45min 1h 2h 3h 5h
Volts/Cell
1.60V 74.1 47.2 35.1 21.5 15.9 12.4 6.85 4.84 3.27
1.65V 70.5 45.6 34 20.8 15.3 12 6.72 4.79 3.24
1.70V 66.9 43.9 32.9 20.0 14.7 11.5 6.59 4.74 3.21
1.75V 63.3 42.2 31.8 19.2 14.1 11 6.46 4.69 3.18
1.80V 59.7 40.5 30.7 18.4 13.5 10.5 6.32 4.64 3.15
(Note)The above characteristics data are average values obtained within
three charge/discharge cycles not the mimimum values.
All data shall be changed without notice,Vision reserves the right to explain
and update the information contained hereinto.
Page 1 of 2 www.vison-batt.com
CP1290H 12V9Ah
Vision Rechargeable Products
O
Discharge characteristic (25 C) Constant voltage charging
o
characteristic (0.25CA,25 C)
CHARGED VOLUME
CHARGE VOLTAGE
CHARGING CURRENT
Relationship between
Self-discharge characteristic
charging voltage and temperature
Capacity(%)
Cycle service life in relation to
Life characteristics of Standby use
depth of discharge
30% Depth of discharge
Temperature effects on float life Temperature effects on capacity
Shenzhen Center Power Tech. Co., Ltd.
Center Power Industrial Park, Tongfu Industrial District Dapeng Town,
518120 Shenzhen, China THE INTERNATIONAL CERTIFICATION NETWORK
Tel: +86-755-8431 8088 Fax: +86-755-8431 8038 ISO9001:2008 MH25860 G4M19906-9202-E-16
Email: [email protected]
Page 2 of 2
