LAI XINFENG WIREMESH (1965) PTE LTD

賴 信 逢 網 業 (1965) 私 人 有 限 公 司
Incorporated in Singapore. Established since 1965.
Lai Xinfeng (LXF) markets itself as the regional distributor of Wiremesh in the Asia Pacific Region.
We specialise in all kinds of Wiremesh, facade mesh and architectural mesh made from a wide range of
materials.

Materials include steel, stainless steel, galvanized iron, brass, aluminium, and even synthetic fabrics such as
polyvinyl, polypropylene, polyester and high density polyethylene.

Wiremesh have many different applications such

as;
-separation plants in the air, oil and gas industry Address: Block 30 Kelantan Road,
-filtration mesh for food, edible oils and beverage #01-91, Singapore 200030
-mesh supplied for shipbuilding/repair
-steel fabricators, building and construction industry Email: [email protected]
-mesh for architectural and design purposes Tel: (+65) 6294 1140
Fax: (+65) 6293 2425
 LAI XINFENG WIREMESH (1965) PTE LTD
!"#$%(1965) &'()*+
Below are the products we can supply:

• HIGH/MEDIUM SECURITY PRISON/MILITARY FENCE

• DOUBLE SKIN HIGH SECURITY FENCE
• SECURITY FENCE/BOUNDARY FENCE/TEMPORARY FENCE
• HDG WELDED FENCE (ROLL TOP/BOTTOM OR FLAT TYPE PROFILE)
• HDG ANTI CLIMB FENCE/ANTI CLIMB SPIKES
• V-PRESS PROFILE SECURITY FENCE
• AIRPORT SECURITY FENCE
• SUB STATION SECURITY FENCE
• TENNIS COURT FENCE
• EXPANDED METAL SECURITY MESH
SUS304/316/316L WELDED MESH PANELS
• GALFAN WELDED FENCE
(DULL FINISH BUT BETTER ANTI CORROSION RESISTANCE THAN HDG COATING)
• FENCING ACCESSORIES U CLIPS/CARRIAGE BOLT/NUT/POST CAP
• STAINLESS STEEL/GALVANIZED/ALUMINIUM/PVC COATED CHAIN LINK FENCE
• STAINLESS STEEL/ALUMINIUM/PVC COATED/GALVANIZED BARBED WIRE
• STAINLESS STEEL/GALVANIZED CONCERTINA RAZOR WIRE
• STAINLESS STEEL/GALVANIZED EXPANDED MESH RAZOR WIRE
• SUS304/316 WELDED MESH (IN ROLLED FORM)
• HOT DIPPED GALVANIZED (OUTDOOR USE)/PRE GALVANIZED (IN DOOR USE)
WELDED MESH (IN ROLLED FORM)
• HOT DIPPED GALVANIZED/STAINLESS STEEL ROOFING MESH
• STAINLESS STEEL/GALVANISED WIREMESH FOR FLOOR SCREEDING
• EXPANDED METAL MESH (MILD STEEL/HOT DIPPED GALVANIZED/ALUMINIUM/STAINLESS STEEL 304/316)
• ANTI-VERMIN/ANTI RAT MESH
• HDG/SUS 304/316L GUTTER MESH
• GREASE FILTER MESH
• WATER TANK MESH
• AIR VENT MESH
• ANTI BIRD SCREEN/BIRD SCREEN
• GARDEN MESH/PET MESH PREMIUM QUALITY
MADE FROM 100% NON RECYCLED HDPE RESINS/UV STABILIZED
• STAINLESS STEEL 304/316L LOUVRE MESH/SUBSTATION VENT SCREEN
• MACHINE PROTECTION MESH
• GALVANIZED/BRASS/STAINLESS STEEL 304/316/316L WOVEN MESH
• GABION MESH (WELDED AND HEXAGONAL TYPE)
• ALUMINIUM/ALUMINIUM ENAMELLED/FIBERGLASS/STAINLESS STEEL 304/316/316L
/BLACK POWDER COATED/BRASS INSECT
• SCREEN/FLY SCREEN/MOSQUITO SCREEN
• HDPE FILTER CLOTH (JAPAN) FOR CHEMICAL FILTRATION/SWIMMING POOL USE
• PP/SUS304/316 DEMISTER MESH (CRIMPED OR FLAT)
• PARTITION SCREEN MESH/VENTILATION SCREEN MESH
• ANIMAL CAGE WELDED MESH
• HOT DIPPED GALVANIZED/STAINLESS STEEL HEXAGONAL/CHICKEN COOP MESH
• SUS 304/316 BBQ MESH
• ANTI BURGLAR/ SECURITY SCREEN MESH
• STORAGE FACILITY WELDED MESH
• WOVEN VIBRATOR/SIEVING SCREEN MESH
• PLAIN WEAVE/TWILLED WEAVE/PLAIN DUTCH/TWILLED DUTCH WEAVE/CORRUGATED OR CRIMPED MESH
• SUS 304/ 316L HAND WOVEN CABLE/WIRE ROPE AVIARY/RAILING MESH
• ALUMINIUM /GALVANIZED/PVC COATED /SUS 304/316 WIRES
Plain Woven Mesh / Crimped Woven Mesh
There are various weaves of wire mesh and each have their own applications.

Plain Weave is the simplest type of weaving method where each warp and weft wires simply “overlap”
each other at right angles in equal intervals. The mesh is woven the same way cloth is woven on a loom.

Also known as wire gauze or wire cloth, woven mesh is an extremely versatile material suitable for many
sieving, straining and filtering applications. It is also woven to fine limits and can be used to separate out
particles of a given size.

At times, the wires are Crimped to provide greater stability, tightness of weave and maximum rigidity. It is
commonly used when the openings are ½” or larger.

Woven wire mesh can be manufactured in an almost endless range of configurations, with a choice of wire
diameter, opening size and metal materials. From thin and flexible sheets to heavier profiles, it’s specified
for uses where exact mesh opening sizes are essential such as sieving, screening, safety and filtration.
Plain Woven Mesh Crimped Woven Mesh
Mesh Number Wire Diameter Approx. Opening Approx. Opening Wire Diameter
2 mesh 3mm 12.5mm 10mm x 10mm 1.5mm – 2mm
3 mesh 1.2mm – 1.9mm 8.5mm 12.5mm x 12.5mm 2mm – 3mm
(½” x ½”)
4 mesh 0.9mm – 1.6mm 6.35mm
20mm x 20mm 3mm
5 mesh 0.7mm – 1.1mm 5.08mm
(¾” x ¾”)
6 mesh 0.7mm – 1.1mm 4.23mm
25mm x 25mm 3mm
7 mesh 1.1mm 3.62mm (1” x 1”)
8 mesh 0.5mm – 1.1mm 3.17mm 38mm x 38mm 3mm
(1½” x 1½”)
10 mesh 0.43mm – 1.1mm 2.54mm
8.4mm x 8.4mm 1.1mm – 1.5mm
12 mesh 0.45mm – 0.81mm 2.11mm (3 mesh)
14 mesh 0.4mm – 0.7mm 1.81mm 6.35mm x 6.35mm 0.9mm – 1.1mm
16 mesh 0.24mm – 0.4mm 1.58mm (4 mesh)

18 mesh 0.35mm 1.41mm 3.17mm x 3.17mm 1.1mm

(8 mesh)
16x18 mesh 0.24mm 1.41mm x 1.58mm
20 mesh 0.24mm – 0.5mm 1.27mm Mesh comes in materials such as;
- Stainless Steel 304
24 mesh 0.35mm 1.05mm - Stainless Steel 304A
25 mesh 0.21mm 1.01mm - Stainless Steel 316
- Stainless Steel 316L
30 mesh 0.2mm – 0.35mm 0.84mm
- Black Powder Coated
30x40 mesh 0.18mm 0.84mm x 0.63mm - Galvanized
40 mesh 0.14mm – 0.3mm 0.63mm - Mild Steel

50 mesh 0.18mm – 0.23mm 0.5mm Standard Roll or Sheet Sizes are;

60 mesh 0.14mm – 0.28mm 0.42mm - 1m x 30m
- 3ft x 30m
80 mesh 0.12mm – 0.14mm 0.31mm
- 4ft x 30m
100 mesh 0.1mm – 0.11mm 0.25mm - 5ft x 30m
- 4ft x 8ft
110 mesh 0.09mm 0.23mm
- 4ft x 50ft
120 mesh 0.08mm 0.21mm
150 mesh 0.06mm 0.16mm
Production tolerance: +- 5%
180 mesh 0.05mm 0.14mm
Availability subjected to prior sales
200 mesh 0.05mm 0.12mm
300 mesh 0.04mm 0.08mm Products we are able to supply are
not limited to what is shown in the table.
400 mesh 0.03mm 0.06mm
500 mesh 0.025mm 0.05mm Please contact us for more information.
Insect Screen / Fly Screen / Mosquito Netting
Recognised throughout the world as the state of the art in precision weaving, LXF shade and mosquito
screening products are also preferred by major window and door manufacturers and by consumers who
purchase screening for home repairs and do-it-yourself home improvement projects. LXFs range of quality
screens are available in Aluminium, Galvanised, Stainless Steel, Poly Vinyl, Fiberglass and Electro-anodised
materials.

Material (Color) Mesh Number Approx. Opening Wire Diameter Standard Sizes
Fiberglass (Black)
Fiberglass (Grey) 18x16 1.13mm x 1.31mm 0.28mm 4ft x 30m
Fiberglass (White)
Fiberglass (Grey) 18x16 1.13mm x 1.31mm 0.28mm 1.6m x 30m
Fiberglass (Black) 18x30 1.13mm x 0.56mm 0.28mm 4ft x 30m
Aluminum (Black)
18x16 1.13mm x 1.31mm 0.28mm 4ft x 100ft
Aluminum (Silver)
Polyethylene (Green)
16x16 1.31mm 0.28mm 3ft x 100ft
Polyethylene (White)
Polyethylene (Blue)
14x16 1.57mm x 1.34mm 0.24mm 3ft x 100ft
Polyethylene (White)

LAI XINFENG WIREMESH (1965) PTE LTD Availability subjected to prior sales
賴 信 逢 網 業 (1965) 私 人 有 限 公 司 Please contact us for more information.

Address: Block 30 Kelantan Road,

#01-91, Singapore 200030

Email: [email protected]
Tel: (+65) 6294 1140
Fax: (+65) 6293 2425
Insect Screen / Fly Screen / Mosquito Netting (STAINLESS STEEL)
Material Mesh Number Approx. Opening Wire Diameter Standard Sizes
SS316 14x14 1.36mm 0.45mm 5ft x 30m
SS304A 14x14 1.36mm 0.45mm 1m x 30m
1m x 30m
SS304A 14x14 1.4mm 0.4mm
4ft x 30m
SS316
SS316 14x14 1.4mm 0.4mm 4ft x 30m
Powder-coated
Black Color
1m x 30m
SS304A 16x16 1.19mm 0.4mm
4ft x 30m
SS304A 16x16 1.12mm 0.45mm 1m x 30m
1m x 30m
SS316 16x16 1.34mm 0.24mm 4ft x 30m
5ft x 30m
SS304A 16x16 1.34mm 0.24mm 4ft x 30m
SS304A 18x16 1.18mm x 1.34mm 0.24mm 4ft x 30m
SS304A 18x18 1.06mm 0.35mm 1m x 30m
1m x 30m
SS304A 20x20 1.03mm 0.24mm 4ft x 30m
5ft x 30m
SS304A
Powder-coated 20x20 1.03mm 0.24mm 4ft x 30m
Black Color
Security Window Screen / Security Door Screen (STAINLESS STEEL)

Material Mesh Number Approx. Opening Wire Diameter Standard Sizes

SS304 8x8 2.0mm 1.1mm 1m x 30m
1m x 30m
SS304A 10x10 1.74mm 0.8mm
4ft x 30m
SS304A 10x10 1.84mm 0.7mm 1m x 30m
1m x 6m
SS304A 10x10 1.44mm 1.1mm
1m x 12m
SS304A 12x12 1.41mm 0.7mm 5ft x 30m
SS316 12x12 1.54mm 0.58mm 5ft x 30m
SS304A 12x12 1.54mm 0.58mm 36.5” x 30m
SS304A
Powder-coated 12x12 1.54mm 0.58mm 36.5” x 30m
Black Color
SS304A
Powder-coated 12x12 1.30mm 0.81mm 3ft x 30m
Black Color
SS304 14x14 1.12mm 0.7mm 1m x 30m

LAI XINFENG WIREMESH (1965) PTE LTD

賴 信 逢 網 業 (1965) 私 人 有 限 公 司
Address: Block 30 Kelantan Road,
#01-91, Singapore 200030

Email: [email protected]
Tel: (+65) 6294 1140
Fax: (+65) 6293 2425
Stainless Steel Anti-Termite Plain Woven Mesh
Material Mesh Number Mesh Opening Wire Diameter Standard Sizes
SS316
40x40 0.46mm 0.18mm 1m x 30m
SS304
SS316
30x40 0.66mm x 0.46mm 0.18mm 1m x 30m
SS304
Stainless Steel Woven Mesh can be an effective means of preventing subterranean termites from
entering homes from below the ground. During the construction process, stainless steel woven mesh
are added to help block termite entry points in the concealed area.

The plain woven mesh have tiny apertures that are too small for the termites to squeeze
through. It acts as a barrier at any susceptible entry points in the home.

Production tolerance: +- 10%

Availability subjected to prior sales
Products we are able to supply are not limited to what is shown in the table.

Please contact us for more information.

Address: Block 30 Kelantan Road,
#01-91, Singapore 200030

LAI XINFENG WIREMESH (1965) PTE LTD Email: [email protected]

Tel: (+65) 6294 1140
賴 信 逢 網 業 (1965) 私 人 有 限 公 司 Fax: (+65) 6293 2425

LAI XINFENG WIREMESH (1965) PTE LTD

賴 信 逢 網 業 (1965) 私 人 有 限 公 司
Block 30 Kelantan Road #01-91, Singapore 200030
Email: [email protected]
Tel: (+65) 6294 1140 Fax: (+65) 6293 2425
Welded Mesh
Welded Mesh is of generally larger opening
sizes compared to woven mesh, which
consists of a series of parallel and
perpendicular wires spaced at equal distances
being welded at the intersections.

The welded mesh provides more strength and rigidity to maintain uniform squares or rectangular shapes.
Applications for welded meshes include partitions, security panels, fences, cages, gabions and even as a
support mesh for filtrations.

Welding Procedure

Once the wires are drawn down to the desired size or thickness, it is strung through a row of automatic
feeders that is set to the desired grid. The feeder pushes the long parallel strands of wire through the
welder while another feeder drops perpendicular sections of wire down from the top on to the parallel
wires.

The machine then welds multiple rows of wires together at the intersection simultaneously by using a row
of electrical resistance weld heads which then fuses the joints. The mesh is then pushed or pulled ahead so
that the next row can be welded.

This process continues, joining each row of wires together until it has reached its desired dimensions. It is
then cut by a shear resulting in a flat and rigid sheet of welded wire mesh.
Welded Mesh

Mesh Opening Wire Diameter

Inch Metric
¼” 6.35mm 0.7mm – 1.2mm
3/8” 9.5mm 0.9mm – 1.2mm
½” 12.5mm 0.55mm – 2mm
5/8” 15.8mm 1.5mm
¾” 19.05mm 1.5mm – 3mm
1” 25mm 1mm – 3.5mm
1½” 38.1mm 3mm
2” 50mm 2mm – 6mm
3” 75mm 3mm – 5mm
4” 100mm 4mm – 6mm
5” 125mm 5mm
½” x 1” 12.5mm x 25mm 1.5mm – 2.5mm
½” x 3” 12.5mm x 75mm 3mm – 4mm
1” x 2” 25mm x 50mm 2mm – 5mm
1” x 3” 25mm x 75mm 3mm – 4mm
2” x 4” 50mm x 100mm 5mm
2” x 6” 50mm x 150mm 5mm
6” 150mm 6mm

Mesh comes in materials such as; Standard Roll or Sheet Sizes;

- Stainless Steel 304 - 1m x 30m - 1.2m x 2.4m
- Stainless Steel 304A - 3ft x 30m - 1.5m x 2.4m
- Stainless Steel 316 - 4ft x 30m - 1.8m x 2.4m
- Stainless Steel 316L - 5ft x 30m - 2.1m x 2.4m
- Black Powder Coated - 2.4m x 2.4m
- Galfan - 3ft x 70ft
- Galvanized - 3ft x 90ft
- Hot-dipped Galvanized - 4ft x 38ft
- Mild Steel

Production tolerance: +- 5%
Availability subjected to prior sales
Products we are able to supply are not limited to what is shown in the table.

Please contact us for more information.

GALVANIZED / STAINLESS STEEL / PVC COATED
Bird Screen Netting / Anti Bird Mesh / Louvre Mesh
Mesh Opening
Wire Diameter Standard Sizes
Inch Metric
5.65mm 0.7mm 1m x 30m, 4ft x 30m
¼” x ¼”
0.50mm 0.8mm 4ft x 30m
9.0mm 0.9mm 1mx 30m, 5ft x 30m
3/8” x 3/8”
7.3mm 1.2mm 4ft x 30m
½” x ½” 12.5mm 0.7mm 4ft x 30m
1mm 1m x 30m, 4ft x 30m
1.1mm 4ft x 30m
½” x ½” 12.0mm
1.2mm 4ft x 30m
1.5mm 3ft, 4ft, 1m x 30m
1.5mm
¾” x ¾” 20mm 4ft x 30m
2.0mm
1.0mm
1” x 1” 25mm 4ft x 30m
1.2mm
1” x 1” 24mm 1.5mm 4ft x 30m
1” x 1” 23.5mm 2.0mm 3ft, 4ft, 1m x 30m
Production tolerance: +- 10%
Availability subjected to prior sales
Products we are able to supply are not limited to what is shown in the table.
Products listed above which are welded meshes are commonly used as bird screens / bird mesh /
louvre.
Difference in sizes are based on project requirements.

Please contact us for more information.

PLASTIC (HDPE / High-density Polyethylene)
Bird Screen Net / Anti Bird Mesh / Pet Mesh / Garden Mesh
Opening Roll Size Color Opening Roll Size Color
2mm 1m x 25m Grey
Black 3mm
1m x 25m White
4mm 5mm
1.25m x 25m Pink
Black 7mm
White 9mm
6mm 1m x 25m Brown 3ft x 30m Black
Green 12mm
Grey 17mm
8mm 2m x 25m Black
8.5mm 2m x 25m Black 25mm
1m x 25m 50mm
10mm 2m x 25m Black
Black Availability subjected to prior sales
11mm 1m x 25m Brown Please contact us for more information.
12mm(Hex) 1m x 25m Grey
Grey
15mm 1m x 25m Black LAI XINFENG WIREMESH (1965) PTE LTD
Green 賴 信 逢 網 業 (1965) 私 人 有 限 公 司
Black
1m x 25m Green Address: Block 30 Kelantan Road,
27mm #01-91, Singapore 200030
Black
2m x 25m Green
Black Email: [email protected]
2” 1.8m x 25m Green Tel: (+65) 6294 1140
Fax: (+65) 6293 2425
LAI XINFENG WIREMESH (1965) PTE LTD Address: Block 30 Kelantan Road,
#01-91, Singapore 200030
賴 信 逢 網 業 (1965) 私 人 有 限 公 司
Email: [email protected]
Tel: (+65) 6294 1140
Fax: (+65) 6293 2425
Welded Mesh Fencing
FASeries
Panel Size Mesh Spacing (mm) Wire
Model Height(mm) Width(mm) Vertical Horizontal Diameter
FA900 900
FA1200 1200
FA1500 1500
2400 50mm 150mm ± 5mm
FA1800 1800
FA2100 2100
FA2400 2400
Standard Model comes in Roll Top & Bottom OR Flat Panel
Other sizes available upon request
All sizes are subjected to manufacturing tolerance
Welded Mesh Security Fencing

LX2575 Series
Panel Size Mesh Spacing (mm) Wire
Model Height(mm) Width(mm) Vertical Horizontal Diameter
LX-900 900
LX-1200 1200
LX-1500 1500
2400 25mm 75mm ± 4mm
LX-1800 1800
LX-2100 2100
LX-2400 2400

Standard Model comes in Roll Top & Bottom OR Flat Panel

Other sizes available upon request
All sizes are subjected to manufacturing tolerance
Anti-Climb Fencing
Anti-Climb Series
Panel Size Mesh Spacing (mm) Wire
Model Height(mm) Width(mm) Vertical Horizontal Diameter
A-900 900
A-1200 1200
A-1500 1500
2400 75mm 12.5mm ± 4mm
A-1800 1800
A-2100 2100
A-2400 2400
Standard Model comes in Flat Panel
Other sizes available upon request
All sizes are subjected to manufacturing tolerance
Anti-Climb Fencing
防 爬 網

*Note: Other sheet sizes available upon request

RAZOR BARBED WIRE
EXJ>ANDED MEli\L
LWM
Let us first consider a mesh with conventional
diamond-shaped apertures. In the expansion
process the sheet metal blank is transformed
by a continuous shear-and-press action into a
lattice-work of undulating strands.
SWM

This sheet is
8'0 11 (2.44m) LW M x 4'0" (1.22m) SWM

SWM

LWM

This sheet is
4'0" (1.22m) LW M x 8'0 (2.44m) SWM

Available Material
The width and the length of the strands are set
at an angle to the plane of the sheet of mesh.

W idth of strand at an angle to plane

Length of strand at an angle to plane

MILD STEEL
Specification of mesh Made from low carbon steel conforming to JIS
openi• ng G3131/SPHC. For non-corrosion, it can be hot
dipped galvanised to BS EN ISO 1461 or powder
The Long Way (LWM) of the mesh opening is coated.
uniform, and the Short Way (SWM) is ALUMINIUM
approximate only and is subject to variation Commercial Grade AA 1100 (mill finish). Other
depending on the strand width and material Grades of aluminium ore also possible upon request.
thickness. However, it may not generally alter STAINLESS STEEL
the overall mesh type during manufacture. Usually produced from Grade SS304and SS316.
METAL SIZE

SWM x LWM 30 x 75
SWM x LWM 35 x 76

SWM x LWM 25 x 40/81 Detail shown at 25% actual size

• Because there are no welds or joints, it

operates as o structur,al m.ember that
distributes loads even,ly over o wider orea.
• Lighter in weight yet stronger than steel sheet,
thus economical applications for
walkway p l a t f o r m , security fencing,
machine guard, rac ing, etc.
• The open mesh design allows passage of
light, air and sound; used for screenmesh,
ventilation and security screen in many
industrial buildings.
• The anti-skid surface provides safety and grip
suitable for stairtreaas, rugged maintenance
floor, gratings and catwalks for factories,
shipyards and oif refineries.
• Anti-corrosive when hot-dipped galvanised
or powder-coated.

Shee.t Sizes & Tolerance

Expanded metal comes in standard sheet size of 2440mm(SWM) x 1220mm(LWM), other sheet
sizes ore available upon request. Some light meshes ore supplied in roll for easy handling and
storage. All sheet and roll sizes ore subject to tolerance.
SPECIEICATIONS
Nominal Strand Standard
Type Ref. No Material Thickness• Width Weight
Size Of Mesh Sheet Size
SWM LWM (:tl 0%) (±10%) (±10%) SWMxLWM
(mm) (mm) (mm) (mm) kg/m2 (mm)
LM 0515 (GI) Steel 10 21 0.5 , .5 1.24 2440 X 1220
LM 0715 (GI) Steel 10 21 0.7 1.5 1.75 2440 X 1220
LM 0915 (GI) Steel 10 21 0.9 1.5 2.25 2440 X 1220
LM 1015 (GI) Steel 9 29 LO 1.5 2.70 2440 X 1220
Light LM 1515 Steel 9 29 1.5 1.5 4.03 2440 X 1220
Mesh LM 2015 Steel 9 29 2.0 1.5 5.37 2440 X 1220
LM 1520 Steel 16 38 1.5 2.0 3.0 2440 X 1220
LM 1528 Steel 22 57 1.5 2.8 3.02 2440 X 1220
LM 2028 Steel 22 57 2.0 2.8 4.03 2440 X 1220
LM 2030 Steel 35 76 2.0 3.0 3.02 2440 X 1220
SM 3030 Steel 22 57 3.0 3.0 6.49 2-440 X 1220
SM 3035 Steel 22 57 3.0 3.5 7.3 2440 X 1220
SM 30045 Steel 22 57 3.0 4.5 9.75 2440 X 1220
SM4545 Steel 22 57 4.5 4.5 15 2-440 X 1220
SM 30030 Steel 35 76 3.0 3.0 4.03 2440 X 1220
SM 3045 Steel 35 76 3.0 4.5 6.05 2440 X 1220
Security & SM 45050 Steel 35 76 4.5 5.0 10.48 2440 X 1220
SM 45060 Steel 35 76 4.5 6.0 7 2.43 2440 X 7220
Decorative 35 76 6.0 76.58
SM 6060 Steel 6.0 2440 X 7220
Mesh SM 3545 Steel 42 115 3.0 4.5 5.37 24-40 X 1220
SM 3060 Steel 42 115 3.0 6.0 7.05 2-440 X 1220
SM 4560 Steel 42 115 4.5 6.0 70.-41 2440 X 1220
SM 3050 Steel 50 150 3.0 5.0 4.71 2440 X 1220
SM 5050 Steel 75 150 5.0 5.0 5.3 2440 X 1220
SM 3075 Steel 95 200 3.0 7.5 3.8 2440 X 1220
D M 3032 Steel 25 40/81 3.0 3.2 6.05 2440 X 1220
W M 50080 Steel 45 135 5.0 8.0 14.11 2440 X 1220
WM 50110 Steel 45 135 5.0 11.0 19.48 2440 X 1220
Walkway W M 30080 Steel 30 75 3.0 8.0 12.55 2440 X 1220
Mesh WM 50075 Steel 30 75 5.0 7.5 23.5 2440 X 1220
W M 50105 Steel 30 75 5.0 10.5 27.55 2-4-40 X 1220
Louvre
LOM 1563 Alum 16
12
I 76
65
1.5 6.3 3.4 2440 X 1220
LOM 2045 Alum 2 4.5 4.1 2440 X 1220
M&sh
LOM 2050 AJum 13.5 I 45 2 5.0 4.2 2440 X 1220
Expanded M e t a l to Japan Standard
XGll Steel 34 135.4 -4.5 7.0 14,5 2440 X 1220
XG12 Steel 34 135.4 6.0 7.0 19.4 2440 X 1220
XG13 Steal 34 135.4 6.0 9.0 24.9 2-440 X 1220
XGl-4 Steel 34 135.4 8.0 9.0 3,3.2 2-440 X 1220
XG21 Steel 36 107.6 4.5 7.0 13.7 2440 X 1220
XG22 Steel 36 107.6 6.0 7.0 18.3 2440 X 1220
XG23 Steel 36 107 .6 6.0 9.0 23.6 24-40 X 1220
XG24 SteeJ 36 107 .6 8.0 9.0 31.4 2-4-40 X 1220
• Thickness up to 9.0mm {to a maximum of 1525mm LWM Direction)

1. Standard weight tolerance, subject to :!:: 10%.

2. Nominal sheet size-shortway direction, subjed to ±50mm.
Nominal sheet size-longwoy dir,ection, subject to ± 10mm.
3. Also available in m aterial such as Aluminium and Stainless Steel.
4. Specic,I sheet sizes also available upon request.
5. Short WCJYmesh and strand width may v a r y ± 10% due to manufacturing constraints. Should you
need exact opening, you must discuss with ovr soles staff prior to ordering.
LOADING TABLE FOR WALKWAY MESH

S P E C I F I C A T I O N S A N D L O A D / S P A N T ABL ES
LOAD SIMPLE SPAN-mm DOUBLE SPAN-mm TRIPLE SPAN-mm
CAT.No. CONDITION LOADING CRITERIA 200 250 300 400
600 750 900 1200 300 380 450 600
LOADCAPACITY 4.9 3.1 2.25 1.22 12.6 8.9 5,2 1143.85 30.3 21.4 12.14
UniformLood 9.9 5.1 3.0 1.2 120 12.5 1
(KN/m2) DEFLECTION SPAN/240
LOAD SPAN/360 6.6 3.4 2.0 0.8 19.4 8.4 26.3
lw oo I Poipt Lood LOADCAPACITY 1.0 0.85 0.74 0.53 2.5 1.96 1.68 1.27 4 3.17 2.68 2.00
DEFLECTION SPAN/180 0.99 g .63 0.-44 0.25 3.24 2.40 1.38 ,4,98 2.89
KN) LOAD SPAN/240 0.73 .48 0.33 0.19 4.01 2.56 1.82 1.02 5.41 3.80 2.18
LOADCAPACITY 6.43 -4.2 2.9 1.7 16.6 11.9 6.7 -40.0 28.2 16
UniformLood DEFLECTION SPAN/240 9.4 5.5 2.2 126.73
(KN/m2) LOAD SPAN/360 6.4 3.7 1.5
22.9 1156
15.3
73.1
49.2 I
I WM50110 I Point Lood LOADCAPACITY
DEFLECTION SPAN/180
0.44 0.13 0.96 0.72
0.82 o . ! 8 0.82 0,47
3.23 2.58 2.18 1.65
2.58
4.98 4.17 3.49 2.67
5.38
(KN) LOAD SPAN/240 0.37 0. 9 0.62 0.35 4.76 3.38 1.91 7.07 4.11
LOADCAPACITY 5.8 3.7 2.6 1.5 23.4 14.9 10.5 6.0 35.9 24.9 J.4.3
UniformLood 11.3 5.9 3.4 1.5 14.1 150.4
(KN/m2) DEFLECTION SPAN/240
LOAD SPAN/360 9.6 3.9 2.2 0.9 20.2 9.7 30.3 I
IWM50075 I Point(KN)Load LOADCAPACITY
DEFLECTION SPAN/180
1.3 1.01 0.84 0.63
1.14 0.73 0.52 0.29
2.9 2.31 1.93 1.5
6.19 3.96 2.76 1.60
4.50 3,7-4 3.12 2.38
5.87 3.38
LOAD SPAN/240 0.85 0.55 0.38 0.21 4.63 2.97 2.06 1.19 6.32 -4.43 .2.53
LOADCAPACITY 8.2 59.. 3.65 2.0 21.1 15.8 8.5 69.3 51.1 35.-4 20.1
UniformLood 18.3 5.5 2.4 133.2
(KN/m2) DEFLECTION SPAN/240
LOAD SPAN/360 12.3 6.4 3.7 1.5 35.7 15.5 II 49.2 I
I WM50105 I Point Load LOADCAPACITY
DEFLECTION SPAN i/180
1.8 1.43 1.20 0.90
1.84 1.19 0.83 0.46
4.12 3.29 2.76 2.08
6.40 4.51 2.58
6.28 5.29 ,4,,49 3.38
10.67 5.34
(KN) 1.37 0.89 0.62 0.35 7.54 4.80 3.40 1.91 10.14 7.07 4.09
LOAD SPAN1240
UniformLoodI SPAN-mm 200 300 400 500 600 200 300 400 500 600 200 300 400 500 600
(KN/m2) LOADCAPACITY I 14.00 4.59 1.54 0.60 0.29 14.00 6.22 3.48 1.44 0.70 16.41 7.29 2.88 1.19 0.58
IW 0080/FI Point Load LOADCAPACITY 0.92 0.58 0.24 0.13 0.07 I I 1.13 0.76 0.56 0.31 0.19111.22 0.82 0.48 0.25 0.15 1
(KN) I II

S P E C I F I C A T I O N S A N D L O A D / S P A N T ABL ES
LOAD SIMPLE SPAN-mm DOUBLE SPAN-mm TRIPLE SPAN-mm
CAT.No. CONDITION LOADING CRITERIA 600 750 900 1200 300 380 450 600 200 250 300 00
LOADCAPACITY 4.5 3.0 2.0 1.1 18.4 11.7 8.5 4.7 40.2 28.4 19.8 11.4
UniformLoad 3.8 2.0 1.1 0.5 37.3 18.9 11.1 4.8 35.6 15.4
(KN/m2) DEFLECTION
LOAD
SPAN/240
SPAN/360 2.5 1.3 0.8 0.3 24.7 12.5 7.5 3.1 64.3 40.8 23.7 10.3
WM50080/A 3.65 2.97 2.48 1.87
LOADCAPACITY 1.00 0.85 0.74 0.53 2.5 1.95 1.68 1.27
Point Lood DEFLECTION SPAN/180 0.99 0.63 0.-44 0.25 3.24 2.40 1.38 3.78 2.80 1.93 1.15
(KN) LOAD SPAN/240 0.73 0.48 0.33 0.19 4.01 2.56 1.82 1.02 3.03 2.08 1.45 0.86
LOADCAPACITY 5.4 3.6 2.5 1.4 22.3 16.6 11.9 6.7 49.1 34.4 24.1 13.9
UniformLood DEFLECTION SPAN/240 6.4 3.3 1.9 0.8 16.6 8.1 25.8
(KN/m2) LOAD SPAN/360 4.2 2.2 1.2 0.6 41.7 21.1 11.1 5.4 40.1 17.4
WM50110/A 1.21 0.97 0.81 0.60
LOADCAPACITY 2.79 2.21 1.87 1.49 4.38 3.60 3.00 2.29
Point Load DEFLECTION SPAN/180 0.64 0.41 0.21 0.16 3.49 2.21 1.56 0.81 6.34 4.69 3.27 1.89
(KN) LOAD SPAN/240 0.48 0.31 0.2 0.12 3.62 1.65 1.16 0.66 4.78 5.51 2.53 1.41
LOADCAPACITY 3.2 2.25 1.2 20.1 12.7 8.9 5.1 44.0 30.8 21.5 12.2
Uniform Load DEFLECTION SPAN/240 44., 2.3 1.3 0.6 21,.4 12.8 5.6 40.5 17.4
(KN/m2) LOAD SPAN/360 2.9 1.5 0.9 0.3 28.4 4.2 8.4 3.7 73.4 46.6 27.5 11.7
IW - 75/ AI Point Load LOADCAPACITY 1.1 0.86 0,f2 0.54 2.49 1.97 1.67 1.24 3.98 3.20 2.69 2,02
DEFLECTION SPAN/180 0.43 0.28 0. 9 0.11 2.36 1.49 1.05 0.60 4.38 3.18 2.22 1.27
(KN) LOAD SP.AN/240 0.32 0.21 0.14 0.08 1.78 1.12 0.79 0.-45 3.45 2.39 1.69 0.95
LOADCAPACITY
Uniform Load DEFLECTION SPAN/240 6.5 4.4 3.0 1.7 27.5 17.3 12.3 7.0 58.1 42.3 29.6 17.0
6.6 3.5 2.0 0.9 33.0 19.4 8.5 27.2
(KN/m2) LOAD SPAN/360 4.4 2.3 1.4 0.6 43.5 22.1 13.0 5.6 108.0 72.2 42.1 17.9
WM50105/A LOADCAP.ACITY 1.5 1.19 1.00 0.74 3.41 2.71 2.29 1.72 5.31 4.40 3.6i 2.78
Point Lood DEFLECTION SPAN/180 0.67 0.-44 0.30 0.17 3.6-8 2.31 1.63 0.92 6.60 4.91 3.4 1.98
(KN) LOAD SPAN/240 0.50 0.32 0.22 0.13 2.75 1.73 1.22 0.70 4.96 3.69 2.58 1.49

NOTE:
1. Load capacities given in the table ore heaviest
loads that will cause no permanent deformation
with safety factor of 1.4 times. If some
The selection guide permanent deformation is allowed. loads eon be
increased by 40%.
assumes m e s h a n n i n g i n 2. The load table is adplicable base on spanning in
the direction of long way LWM direction an spot-weld at every 4 strand
mesh (LWM} having a on support and minimum 25mm landing on both
ends.
minimum of every fourth 3. Spanning recommended based on assumption
strand welded on support that deflection is not greater than span /200.
and minimum 25mm end 4. Spanning stated in table are nominal. Clear
bearing. spans are obtained by deducting 25mm landing
on both ends.
EXPANDED FACADE MESH
Aluminium Expanded Metal Facade Mesh can be custom make to provide a unique appealing architectural
look for commercial & residential buildings.

ALUMINIUM FACADE MESH: SPECIFICATION

Nominal Strand Standard
Ref. No M aterial Thickness Weight
Size Of Mesh Width Sheet Size

I SWM
(mm)
LWM
(mm)
(±10%)
(mm)
(± 10%)
(mm)
(±10%)
kg/m 2
SWM x LWM
(mm)
SM15016A Aluminium 42 115 1.5 16 3.1 2440 X 1220
SM20016A Aluminium 42 115 2.0 16 4.2 2440 X 1220
SM20015A Aluminium 45 135 2.0 15 3.9 244.QX 1220
SM30016A Aluminium 48 135 3.0 16 5.5 2440 X 1220
SM20030A Aluminium 70 150 2.0 30 4.7 2440 X ]220
SM30030A Aluminium 70 150 3.0 30 7 2440 X 1220

--
---...:....

: - - . . . . . . _

- --
, c " = - - - -
=== -s.::::..---
- --
or.:-
APPLICATION
RAZOR BARBED MESH( EXPANDED MESH TYPE) ATM

J
The Razor Barbed Mesh Security Panel is
most suitable for use is high security area
like prisons, military and police camps,

I
power stations, catchment areas-dams,
reservoir television / telecommunication
control / transmission tower, gas work, oil
refineries, airport, perimeter fencing along
border / coast-line in isolated areas with a
history of regular intrusion etc.

MESH Strand Standard

TYPE BLADE Thickness
OPENING (mm)
Width Sheet Size
THICKNESS (mm)
SWM LWM SWM x LWM
(mm) (mm) (mm) (mm)
HDG/ATM 0.6 95 X 200 3.0 3.5 ±520 X ±2500
ZINC
500g/m2
ANTI-CLIMB .EXP.ANDED METAL

Expanded metal anti-climb is

developed for perimeter fencing along
coastal line and military camps. The
12.5mm short way spacings do not
allow gripping of hands or legs. The
sherp razor edges wiII further deter
intrusion.

MESH Strand Standard

MATERIAL Thickness
OPENING (mm)
Width Sheet Size
(mm)
SWM LWM SWM x LWM
(mm) (mm) (mm)
HDG 12.5 X 75 3.0 3.0 2440 X 1220
ZINC 500g/m2
PVC Coated & Galvanized Chain-Link Fencing

PVC Coated Chain-Link Fencing Specifications:

Wire Gauge Standard Height Standard Width

PVC Wire 8# (4.0mm)
PVC Wire 9# (3.5mm) 50ft
3ft – 12ft
PVC Wire 10# (3.0mm)
PVC Wire 12# (2.6mm)

Galvanized Chain-Link Fencing Specifications:

Wire Gauge Standard Height Standard Width

GI Wire 8# (4.0mm)
GI Wire 9# (3.5mm) 50ft
3ft – 12ft
GI Wire 10# (2.7mm)
GI Wire 12# (2.2mm)

Aluminium Slat

*Available in green and grey colour

*Single coil comes in 2” x 800m (Cut-to-Size available)
Razor Concertina Barbed Wire Coil (BTO22 Razor)

Material Loop Type Loop Diameter Length

SS304 Single 900mm 10m
SS316L-N12 10m
Galvanized 50-70gm Crossed 900mm 12m - 15m
Hot-dipped Galvanized 280gm 10m
Galvanized 50-70gm Crossed 600mm 10m

Barbed Wire Coil

Material Wire Diameter Length/coil

Aluminum 2.5mm 50m / 100m
Galvanized (Zinc 50-70gm) 2.3mm 50m
Hot-dipped Galvanized
2.5mm 50m
(Zinc 250-260gm)
SS316 2.1mm 50m
PVC Coated (Green) 2.3mm 75m
GALFAN MATERIAL
Galfan is a type of steel that is coated with a zinc-aluminium layer instead of a traditional galvanized steel
zinc layer because the zinc-aluminium layer has superior corrosion resistance.
This superior corrosion resistance allows thinner layers of protective coatings to be applied.

The eutectic composition of 95% Zn and 5% Al improves the coating adhesion and enables a lamellar
coating structure in micro-scale, which makes it a ductile and well-suited coating for deep drawing.

A thin layer of zinc-aluminium improves the weldability of the material because the reduced protective layer
thickness allows for greater weld penetration and less dilution of zinc into the weld pool.

Galfan coating is produced both-sided in a continuous hot-dip coating process. Because of the sacrificial
nature of the Galfan coating, it provides corrosion protection for areas of exposed steel surfaces, such as
cutting edges and possible areas where coating has damaged (scratches, impacts, etc.).

Full corrosion protection is also achieved in areas that have been heavily formed because the peeling
tendency of low-friction and tightly bonded coating is low.