REF.
765
2 PIECES SPLIT BODY STAINLESS STEEL BALL VALVES FLANGED PN16/40 DIN 3202-1 F4/F5
2 pieces stainless steel Split body ball valve with full bore for Chemical industries, petrochemical industries, hydraulic
installation, heating, water distribution, compressed air.
PTFE filled with 15% glass seat for a temperature up to +180°C.
Double antistatic device.
Handling possible with gearbox.
Thanks to the ISO 5211 plate, an actuator can be installed on the valve.
Certificate
3.1
Size : DN15 to DN150
Connection : Flanged PN16/40 RF
Min Temperature : -10°C
Max Temperature : +180°C
Max Pressure : 40 bars up to DN50, 16 bars over
Specifications : Double Antistatic device
ISO 5211 mounting pad
Anti blow-out stem, full bore
PTFE filled with 15% glass seat
Materials : Stainless steel ASTM A351 CF8M
Sferaco 90 rue du Ruisseau 38297 St Quentin Fallavier Tel: + 33 (0) 474.94.15.90 Fax: + 33 (0) 474.95.62.08 Internet: www.sferaco.fr E-mail : [email protected]
Date : 07/20 Rev.02
Page 1 sur 12
Information provided as an indication and subject to possible modification
REF. 765
2 PIECES SPLIT BODY STAINLESS STEEL BALL VALVES FLANGED PN16/40 DIN 3202-1 F4/F5
SPECIFICATIONS :
• Full bore
• Anti blow-out stem
• Double antistatic device
• PTFE filled with glass seat
• Handle with locking device up to DN50
• ISO 5211 mounting pad
• 2 pieces type ( Split body )
• Hollow ball for DN125 and DN150
USE :
• Chemical industries, petrochemical industries, hydraulic installation, heating and water distribution
• Min and max Temperature Ts : -10°C to + 180°C
• Max pressure Ps : 40 bars up to DN50, 16 bars over
RANGE :
• Ball valve with stainless steel body Ref. 765 from DN 15 to DN 150
ENDS :
• R.F. flanges PN40 up to DN50, PN16 over
PRESSURE / TEMPERATURE GRAPH ( STEAM EXCLUDED ) :
Pressure
TORQUE VALUES ( in Nm without safety coefficient ) :
DN 15 20 25 32 40 50 65 80 100 125 150
Torque ( Nm ) 6 8 10 14 20 30 36 60 95 150 210
Sferaco 90 rue du Ruisseau 38297 St Quentin Fallavier Tel: + 33 (0) 474.94.15.90 Fax: + 33 (0) 474.95.62.08 Internet: www.sferaco.fr E-mail : [email protected]
Date : 07/20 Rev.02
Page 2 sur 12
Information provided as an indication and subject to possible modification
REF. 765
2 PIECES SPLIT BODY STAINLESS STEEL BALL VALVES FLANGED PN16/40 DIN 3202-1 F4/F5
MATERIALS DN 15 - 50 :
Item Designation Materials
1 Body
ASTM A351 CF8M
2 End
3 Ball
AISI 316
4 Stem
5* Seat PTFE filled with 3% glass fiber
6* Body gasket DN15-32 PTFE filled with 15% graphite
6* Body gasket DN40-50 AISI 304 + graphite
7* Thrust washer PTFE filled with 15% graphite
8* O ring FKM
9* Packing PTFE
10 Gland AISI 304
11 Elastic ring AISI 301
12 Nut
13 Washer
AISI 304
14 Washer
15 Handle
16 Handle cover Plastic
17 Nut
18 Stud bolt
19 Spring washer AISI 304
20 Locking device
21 Stopper
( * : Included in gaskets kit )
Sferaco 90 rue du Ruisseau 38297 St Quentin Fallavier Tel: + 33 (0) 474.94.15.90 Fax: + 33 (0) 474.95.62.08 Internet: www.sferaco.fr E-mail : [email protected]
Date : 07/20 Rev.02
Page 3 sur 12
Information provided as an indication and subject to possible modification
REF. 765
2 PIECES SPLIT BODY STAINLESS STEEL BALL VALVES FLANGED PN16/40 DIN 3202-1 F4/F5
MATERIALS DN 65 - 100 :
Item Designation Materials
1 Body
ASTM A351 CF8M
2 End
3 Ball
AISI 316
4 Stem
5* Seat PTFE filled with 3% glass fiber
6* Body gasket AISI 304 + graphite
7* Thrust washer PTFE filled with 15% graphite
8* O ring FKM
9* Packing PTFE
10 Gland AISI 304
11 Elastic ring AISI 301
12 Nut
13 Washer
AISI 304
14 Washer
15 Handle
16 Handle cover Plastic
17 Spring washer
18 Stud bolt
19 Nut AISI 304
20 Stopper
21 Handle nut
( * : Included in gaskets kit )
Sferaco 90 rue du Ruisseau 38297 St Quentin Fallavier Tel: + 33 (0) 474.94.15.90 Fax: + 33 (0) 474.95.62.08 Internet: www.sferaco.fr E-mail : [email protected]
Date : 07/20 Rev.02
Page 4 sur 12
Information provided as an indication and subject to possible modification
REF. 765
2 PIECES SPLIT BODY STAINLESS STEEL BALL VALVES FLANGED PN16/40 DIN 3202-1 F4/F5
MATERIALS DN 125 - 150 :
Item Designation Materials
1 Body
ASTM A351 CF8M
2 End
3 Ball
AISI 316
4 Stem
5* Seat PTFE filled with 3% glass fiber
6* Body gasket AISI 304 + graphite
7* Thrust washer PTFE filled with 15% graphite
8* O ring FKM
9* Packing PTFE
10 Gland AISI 304
11 Elastic ring AISI 301
12 Nut ASTM A351 CF8
13 Spring washer AISI 304
14 Washer AISI 304
15 Handle adaptor ASTM A351 CF8
16 Nut ASTM A351 CF8
17 Handle AISI 304
18 Handle cover Plastic
19 Handle screw
20 Stopper
AISI 304
21 Stopper nut
22 Screw
( * : Included in gaskets kit )
Sferaco 90 rue du Ruisseau 38297 St Quentin Fallavier Tel: + 33 (0) 474.94.15.90 Fax: + 33 (0) 474.95.62.08 Internet: www.sferaco.fr E-mail : [email protected]
Date : 07/20 Rev.02
Page 5 sur 12
Information provided as an indication and subject to possible modification
REF. 765
2 PIECES SPLIT BODY STAINLESS STEEL BALL VALVES FLANGED PN16/40 DIN 3202-1 F4/F5
SIZE DN 15 - 50 ( in mm ) :
DN 15 - 50
DN 15 20 25 32 40 50
ØP 15 20 25 32 40 50
L 115 120 125 130 140 150
E 161.2 161.2 161.2 204.5 204.5 204.5
H 82.7 83.2 88.2 111 112 120
Weight (in Kg) 2.2 3.02 3.79 5.74 6.79 9.33
Ref. 765015 765020 765025 765032 765040 765050
Sferaco 90 rue du Ruisseau 38297 St Quentin Fallavier Tel: + 33 (0) 474.94.15.90 Fax: + 33 (0) 474.95.62.08 Internet: www.sferaco.fr E-mail : [email protected]
Date : 07/20 Rev.02
Page 6 sur 12
Information provided as an indication and subject to possible modification
REF. 765
2 PIECES SPLIT BODY STAINLESS STEEL BALL VALVES FLANGED PN16/40 DIN 3202-1 F4/F5
SIZE DN 65 - 100 ( in mm ) :
DN 65 - 100
DN 65 80 100
ØP 65 80 100
L 170 180 190
E 325 325 325
H 160 170 186
Weight (in Kg) 15.2 19.58 27.36
Ref. 765065 765080 765100
Sferaco 90 rue du Ruisseau 38297 St Quentin Fallavier Tel: + 33 (0) 474.94.15.90 Fax: + 33 (0) 474.95.62.08 Internet: www.sferaco.fr E-mail : [email protected]
Date : 07/20 Rev.02
Page 7 sur 12
Information provided as an indication and subject to possible modification
REF. 765
2 PIECES SPLIT BODY STAINLESS STEEL BALL VALVES FLANGED PN16/40 DIN 3202-1 F4/F5
SIZE DN 125 - 150 ( in mm ) :
DN 125 - 150
DN 125 150
ØP 125 150
L 325 350
E 520 620
H 211 228
Weight (in Kg) 38.86 50.72
Ref. 765125 765150
Sferaco 90 rue du Ruisseau 38297 St Quentin Fallavier Tel: + 33 (0) 474.94.15.90 Fax: + 33 (0) 474.95.62.08 Internet: www.sferaco.fr E-mail : [email protected]
Date : 07/20 Rev.02
Page 8 sur 12
Information provided as an indication and subject to possible modification
REF. 765
2 PIECES SPLIT BODY STAINLESS STEEL BALL VALVES FLANGED PN16/40 DIN 3202-1 F4/F5
ISO MOUNTING PAD AND STEM SIZE ( in mm ) :
DN 15 – 50 DN 65 – 100 DN 125 – 150
DN 15 20 25 32 40 50 65 80 100 125 150
C 9 9 11 14 14 14 17 17 17 27 27
ØK 42 42 50 50 70 70 102 102 102 125 125
ISO F04 F04 F05 F05 F07 F07 F10 F10 F10 F12 F12
Nx ØZ 4x6 4x 6 4x 7 4x7 4x9 4x 9 4x 11 4x 11 4x 11 4x14 4x14
H1 11 10 11 16.5 16.5 16.5 21 21 21 34 34
Sferaco 90 rue du Ruisseau 38297 St Quentin Fallavier Tel: + 33 (0) 474.94.15.90 Fax: + 33 (0) 474.95.62.08 Internet: www.sferaco.fr E-mail : [email protected]
Date : 07/20 Rev.02
Page 9 sur 12
Information provided as an indication and subject to possible modification
REF. 765
2 PIECES SPLIT BODY STAINLESS STEEL BALL VALVES FLANGED PN16/40 DIN 3202-1 F4/F5
FLANGES SIZE ( in mm ) :
DN 15 20 25 32 40 50 65 80 100 125 150
ØC 45 58 68 78 88 102 122 138 158 188 212
ØD 95 105 115 140 150 165 185 200 220 250 285
ØK 65 75 85 100 110 125 145 160 180 210 240
Nb x Ø L 4 x 14 4 x 14 4 x 14 4 x 18 4 x 18 4 x 18 4 x 18 8 x 18 8 x 18 8 x 18 8 x 22
b 16 18 18 18 18 20 18 20 20 22 22
e 2 2 2 2 3 3 3 3 3 3 3
Sferaco 90 rue du Ruisseau 38297 St Quentin Fallavier Tel: + 33 (0) 474.94.15.90 Fax: + 33 (0) 474.95.62.08 Internet: www.sferaco.fr E-mail : [email protected]
Date : 07/20 Rev.02
Page 10 sur 12
Information provided as an indication and subject to possible modification
REF. 765
2 PIECES SPLIT BODY STAINLESS STEEL BALL VALVES FLANGED PN16/40 DIN 3202-1 F4/F5
STANDARDS :
• Manufacturer certified ISO 9001 : 2015
• DIRECTIVE 2014/683/EU : CE N° 0035
Risk Category II module D1
• Certificate 3.1 on request
• Designing according to EN 12516-1
• Tests according to API 598, table 6
• Flanges R.F. according to EN 1092-1 PN16
• ISO 5211 mounting pad
• Length according to EN 558 series 27 ( DIN 3202-1 F4 up to DN100, F5 over )
ADVICE : Our opinion and our advice are not guaranteed and SFERACO shall not be liable for the consequences of damages.
The customer must check the right choice of the products with the real service conditions.
Sferaco 90 rue du Ruisseau 38297 St Quentin Fallavier Tel: + 33 (0) 474.94.15.90 Fax: + 33 (0) 474.95.62.08 Internet: www.sferaco.fr E-mail : [email protected]
Date : 07/20 Rev.02
Page 11 sur 12
Information provided as an indication and subject to possible modification
REF. 765
2 PIECES SPLIT BODY STAINLESS STEEL BALL VALVES FLANGED PN16/40 DIN 3202-1 F4/F5
INSTALLATION INSTRUCTIONS
GENERAL GUIDELINES :
• Ensure that the valves to be used are appropriate for the conditions of the installation (type of
fluid,pressure and temperature).
• Be sure to have enough valves to be able to isolate the sections of piping as well as the appropriate
equipment for maintenance and repair.
• Ensure that the valves to be installed are of correct strenght to be able to support the capacity of their
usage.
• Installation of all circuits should ensure that their function can be automatically tested on a regular
basis (at least two times a year).
INSTALLATION INSTRUCTIONS :
• Before installing the valves,clean and remove any objects from the pipes (in particular bits of sealing
and metal) which could obstruct and block the valves.
• Ensure that both connecting pipes either side of the valve (upstream and downstream) are aligned
(if they’re not,the valves may not work correctly).
• Make sure that the two sections of the pipe (upstream and downstream) match,the valve unit will
not absorb any gaps.Any distortions in the pipes may affect the thightness of the connection,the
working of the valve and can even cause a rupture.To be sure,place the kit in position to ensure the
assembling will work.
• If sections of piping do not have their final support in place,they should be temporarily fixed.This is
to avoid unnecessary strain on the valve.
• Tighten the bolts in cross.
• Pressure tests should be done with cleaned pipes
• Pressure tests have to be done with partial opening. Pressure should not exceed valve specifications
according to EN 12266-1 or API 598.
• Pressurizing should be done gradually to avoid water hammer.
• It’s recommended to operate the valve ( open and close ) 1 to 2 times per year
Sferaco 90 rue du Ruisseau 38297 St Quentin Fallavier Tel: + 33 (0) 474.94.15.90 Fax: + 33 (0) 474.95.62.08 Internet: www.sferaco.fr E-mail : [email protected]
Date : 07/20 Rev.02
Page 12 sur 12
Information provided as an indication and subject to possible modification
